首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Summary. In the past tide gauges have provided valuable information concerning the vertical ground deformation associated with major earthquakes. Although tide-gauge data contains numerous sources of noise; a spacing of less than 40 km between gauges is indicated for a useful study of dilatant behaviour, and a spacing of less than 80 km may be adequate for the study of crustal downwarping in island arcs.
An inexpensive tide gauge is described which is designed to provide a continuous record of sea level with a measurement precision of 1 mm. Hydraulic filtering is incorporated into the instrument in order to attenuate daily tides relative to longer period variations of sea level, The instrument is designed to operate from flashlight batteries for a year unattended and to withstand temporary submersion as might be caused by tsunamis. Several of these sea-level recorders have been installed in seismic gaps in the Aleutians and in the Caribbean.  相似文献   

2.
A crustal seismic velocity model for the UK, Ireland and surrounding seas   总被引：1，自引：0，他引：1  
A regional model of the 3-D variation in seismic P -wave velocity structure in the crust of NW Europe has been compiled from wide-angle reflection/refraction profiles. Along each 2-D profile a velocity–depth function has been digitised at 5 km intervals. These 1-D velocity functions were mapped into three dimensions using ordinary kriging with weights determined to minimise the difference between digitised and interpolated values. An analysis of variograms of the digitised data suggested a radial isotropic weighting scheme was most appropriate. Horizontal dimensions of the model cells are optimised at 40 × 40 km and the vertical dimension at 1 km. The resulting model provides a higher resolution image of the 3-D variation in seismic velocity structure of the UK, Ireland and surrounding areas than existing models. The construction of the model through kriging allows the uncertainty in the velocity structure to be assessed. This uncertainty indicates the high density of data required to confidently interpolate the crustal velocity structure, and shows that for this region the velocity is poorly constrained for large areas away from the input data.  相似文献   

3.
During May 1990 and January-February 1991, an extensive geophysical data set was collected over the Côte d'Ivoire-Ghana continental margin, located along the equatorial coast of West Africa. The Ghana margin is a transform continental margin running subparallel to the Romanche Fracture Zone and its associated marginal ridge—the Côte d'Ivoire-Ghana Ridge. From this data set, an explosive refraction line running ∼ 150 km, ENE-WSW between 3°55'N, 3°21'W and 4°23'N, 2°4'W, has been modelled together with wide-angle airgun profiles, and seismic reflection and gravity data. This study is centred on the Côte d'Ivoire Basin located just to the north of the Côte d'Ivoire-Ghana Ridge, where bathymetric data suggest that a component of normal rifting occurred, rather than the transform motion observed along the majority of the equatorial West African margin.
Traveltime and amplitude modelling of the ocean-bottom seismometer data shows that the continental Moho beneath the margin rises in an oceanward direction, from ∼ 24 km below sea level to ∼ 17 km. In the centre of the line where the crust thins most rapidly, there exists a region of anomalously high velocity at the base of the crust, reaching some 8 km in thickness. This higher-velocity region is thought to represent an area of localized underplating related to rifting. Modelling of marine gravity data, collected coincident with the seismic line, has been used to test the best-fitting seismic model. This modelling has shown that the observed free-air anomaly is dominated by the effects of crustal thickness, and that a region of higher density is required at the base of the crust to fit the observed data. This higher-density region is consistent in size and location with the high velocities required to fit the seismic data.  相似文献   

4.
Broad-band data from South American earthquakes recorded by Californian seismic networks are analysed using a newly developed seismic wave migration method—the slowness backazimuth weighted migration (SBWM). Using the SBWM, out-of-plane seismic P -wave reflections have been observed. The reflection locations extend throughout the Earth's lower mantle, down to the core–mantle boundary (CMB) and coincide with the edges of tomographically mapped high seismic velocities. Modelling using synthetic seismograms suggests that a narrow (10–15 km) low- or high-velocity lamella with about 2 per cent velocity contrast can reproduce the observed reflected waveforms, but other explanations may exist. Considering the reflection locations and synthetic modelling, the observed out-of-plane energy is well explained by underside reflections off a sharp reflector at the base of the subducted lithosphere. We also detect weaker reflections corresponding to the tomographically mapped top of the slab, which may arise from the boundary between the Nazca plate and the overlying former basaltic oceanic crust. The joint interpretation of the waveform modelling and geodynamic considerations indicate mass flux of the former oceanic lithosphere and basaltic crust across the 660 km discontinuity, linking processes and structure at the top and bottom of the Earth's mantle, supporting the idea of whole mantle convection.  相似文献   

5.
The onshore crustal and upper mantle velocity structure of the British Isles has been investigated by teleseismic receiver function analysis. The results of the study augment the dense offshore and sparse onshore models of the velocity structure beneath the area. In total almost 1500 receiver functions have been analysed, which have been calculated using teleseismic data from 34 broadband and short-period, three-component seismic recording instruments. The crustal structure has primarily been investigated using 1-D grid search and forward modelling techniques, returning crustal thicknesses, bulk crustal Vp / Vs ratio and velocity-depth models. H −κ stacking reveals crustal thicknesses between 25 and 36 km and Vp / Vs ratios between 1.6 and 1.9. The crustal thicknesses correlate with the results of previous seismic reflection and refraction profiles to within ±2 km. The significant exceptions are the stations close to the Iapetus Suture where the receiver function crustal thicknesses are up to 5 km less than the seismic refraction Moho. This mismatch could be linked to the presence of underplated magmatic material at the base of the crust. 1-D forward modelling has revealed subcrustal structures in northern Scotland. These correlate with results from other UK receiver function studies, and correspond with the Flannan and W-reflectors. The structures are truncated or pinch out before they reach the Midland Valley of Scotland. The isolated subcrustal structure at station GIM on the Isle of Man may be related to the closure of the Iapetus Ocean.  相似文献   

6.
The deep seismic reflection profile Western Approaches Margin (WAM) cuts across the Goban Spur continental margin, located southwest of Ireland- This non-volcanic margin is characterized by a few tilted blocks parallel to the margin. A volcanic sill has been emplaced on the westernmost tilted block. The shape of the eastern part of this sill is known from seismic data, but neither seismic nor gravity data allow a precise determination of the extent and shape of the volcanic body at depth. Forward modelling and inversion of magnetic data constrain the shape of this volcanic sill and the location of the ocean-continent transition. The volcanic body thickens towards the ocean, and seems to be in direct contact with the oceanic crust. In the contact zone, the volcanic body and the oceanic magnetic layer display approximately the same thickness. The oceanic magnetic layer is anomalously thick immediately west of the volcanic body, and gradually thins to reach more typical values 40 km further to the west. The volcanic sill would therefore represent the very first formation of oceanic crust, just before or at the continental break-up. The ocean-continent transition is limited to a zone 15 km wide. The continental magnetic layer seems to thin gradually oceanwards, as does the continental crust, but no simple relation is observed between their respective thinnings.  相似文献   

7.
We present velocity constraints for the upper-mantle transition zones beneath Central Siberia based on observations of the 1982 RIFT Deep Seismic Sounding (DSS) profile. The data consist of seismic recordings of a nuclear explosion in north-western Siberia along a 2600 km long seismic profile extending from the Yamal Peninsula to Lake Baikal. We invert seismic data from the mantle transition zones using a non-linear inversion scheme using a genetic algorithm for optimization and the WKBJ method to compute the synthetic seismograms. A statistical error analysis using a graph-binning technique was performed to provide uncertainty values in the velocity models.
Our best model for the upper-mantle velocity discontinuity near 410 km depth has a two-stage velocity-gradient structure, with velocities increasing from 8.70–9.25 km s−1 over a depth range of 400–415 km, a gradient of 0.0433 s−1, and from 9.25–9.60 km s−1 over a depth range of 415–435 km, a gradient of 0.0175 s−1. This derived model is consistent with other seismological observations and mineral-physics models. The model for the velocity discontinuity near 660 km depth is simple, sharp and includes velocities increasing from 10.15 km s−1 at 655 km depth to 10.70 km s−1 at 660 km depth, a gradient of 0.055 s−1.  相似文献   

8.
Summary. The lithospheric stretching model for the formation of sedimentary basins was tested in the central North Sea by a combined study of crustal thinning and basement subsidence patterns. A profile of crustal structure was obtained by shooting a long-range seismic experiment across the Central Graben, the main axis of subsidence. A seabed array of 12 seismometers in the graben was used to record shots fired in a line 530 km long across the basin. The data collected during the experiment were interpreted by modelling synthetic seismograms from a laterally varying structure, and the final model showed substantial crustal thinning beneath the graben. Subsidence data from 19 exploration wells were analysed to obtain subsidence patterns in the central North Sea since Jurassic times. Changes in water depth were quantified using foraminiferal assemblages where possible, and observed basement subsidence paths were corrected for sediment loading, compaction and changes in water depth through time. The seismic model is shown to be compatible with the observed gravity field, and the small size of observed gravity anomalies is used to argue that the basin is in local isostatic equilibrium. Both crustal thinning and basement subsidence studies indicate about 70 km of stretching across the Central Graben during the mid-Jurassic to early Cretaceous extensional event. This extension appears to have occurred over crust already slightly thinned beneath the graben, and the seismic data suggest that total extension since the early Permian may have been more than 100km. The data presented here may all be explained using a simple model of uniform extension of the lithosphere.  相似文献   

9.
20 magnetotelluric (MT) soundings were collected on the Isle of Skye, Scotland to provide a high-resolution three-dimensional (3-D) electrical resistivity model of a volcanic province within the framework of a project jointly interpreting gravity, seismic, geological and MT data. The full 3-D inversion of the MT data jointly interpreted with gravity data reveals upper crustal structure. The main features of the model are interpreted in conjunction with previous geological mapping and borehole data. Our model extends to 13 km depth, several kilometres below the top of the Lewisian basement. The top of the Lewisian basement is at approximately 7–8 km depth and the topography of its surface was controlled by Precambrian rifting, during which a 4.5 km thick sequence of Torridonian sediments was deposited. The Mesozoic sediments above, which can reach up to 2.2 km thick, have small-scale depocentres and are covered by up to 600 m of Tertiary lava flows. The interpretation of the resistivity model shows that 3-D MT inversion is an appropriate tool to image sedimentary structures beneath extrusive basalt units, where conventional seismic reflection methods may fail.  相似文献   

10.
A hypothesis for the seismogenesis of a double seismic zone   总被引：1，自引：0，他引：1  
The seismogenesis of a double seismic zone, in particular the lower layer of a double seismic zone, has not been adequately explained in the literature. On the basis of seismic data and geothermal structures along three well-studied cross-sections in the Kuril-Kamchatka and Japan subduction zones, we investigate the temperature/pressure conditions associated with seismogenic structures of the double seismic zones. the corresponding T/P loci seem to suggest that earthquakes observed in the lower layer and in the lower part (below approximately 130 ± 20 km) of the top layer of a double seismic zone were caused by metastable phase transition-a mechanism similar to that responsible for deep-focus earthquakes only at lower temperature/pressure conditions. Under this hypothesis, the wedge-shaped configuration of a double seismic zone is interpreted to represent the loci of the kinetic boundary of the phase transition. According to theoretical/experimental studies and the constraints imposed by our observations, a likely candidate for such a phase transition is the metastable Al-rich enstatite decomposing into the assemblage of Al-poor enstatite plus garnet. Earthquakes in the upper part of the top layer were most probably due to conventional mechanisms such as dehydration of subducted materials and/or facies change from basalt to eclogite. That the top layer involves more than one seismogenic mechanism is also implied by the distinct behaviour of seismicity in the vicinity of 130 ± 20 km. Because the presence of deviatoric stress is critical to the reaction rate of a metastable phase transition, it is inferred that single seismic zones are also caused by the same mechanisms, except that the implicit layer of a supposed double seismic zone is missing, due to the insufficient amount of appropriate metastable minerals or to the lack of appropriate deviatoric stresses in the source region.  相似文献   

11.
Summary. Velocities of compressional waves are determined for central California rocks at pressures up to 0.7 GPa (7 kb) and temperatures up to 450°C. These data are used to interpret the seismic velocity structure of the crust in the California Coast Ranges. The seismic data on both sides of the San Andreas fault are consistent with the following model; besides some patches of surface sediments the upper 10—15 km of the crust on the northeast side consists predominantly of sedimentary and metasedimentary rocks of the Franciscan assemblage; the lower crust, of a thickness of 15—20 km, may be composed of gabbroic or other mafic rocks. Across the fault on the south-west side, the entire crustal section is probably a granitic complex similar to that exposed on the surface. The proposed model is shown to be consistent with the observed gravity anomaly.  相似文献   

12.
Detailed interpretation of marine seismic data shows the presence of an extending, active, dextral strike-slip fault zone at the south edge of the Mount Athos Peninsula. The zone is over 100 km long and has both transtensional and transpressive features observable on the seismic lines. We suggest that dextral strike-slip displacement along the zone is on the order of 5–7 km. The structure and fault patterns of Recent deformation in the Central North Aegean Trough is typical of strike-slip tectonism.  相似文献   

13.
Magnetotelluric and gravity data have been collected within a ca. 170 km long traverse running from the Pacific coast of Nicaragua in the west to the Nicaraguan Highland in the east. This part of Nicaragua is characterized by sedimentary rocks of the Pacific Coastal Plain, separated from the Tertiary volcanic rocks of the Highland by the NW-SE-trending Nicaraguan Depression. 2-D interpretation of the magnetotelluric (MT) data, collected at 13 stations, indicates four regions of high electrical conductivity in addition to the conductive coastal region. Two of these are associated with conducting sediments and pyroclastics in the upper part of the crust. Two other conductive structures have been defined at depth around 20 km and the one best defined is located below the depression. From the distribution of seismic events, volcanic activity in the depression and the similarity in geophysical characteristics with areas such as the Rio Grande Rift, this conductor is interpreted as a melt layer or a complex of magma chambers. Models of the upper lithosphere, constrained by the MT model, vertical electrical sounding (VES) data, seismic data and densities, have been tested using gravity data. A model that passes this test shows a gradual thickening of the crust eastwards from the Pacific coast. An anomaly centred over the depression is interpreted to have its origin in a thinning of the crust. In this model the melt layer is situated on top of the bulge of the lower lithosphere. A change in the composition of the crust, from the Pacific Coastal Plain to the Highland, is indicated from the change in character of the MT response and from the density distribution in the gravity model. This may support the hypothesis that the Pacific region is an accreted terrane. MT and gravity data indicate a depth to a resistive and high-density basement in the depression of ca. 2 km. On the basis of this, the vertical setting in the depression is estimated to be of the order of 2.5 km.  相似文献   

14.
The Pisco earthquake ( M w 8.0; 2007 August 15) occurred offshore of Peru's southern coast at the subduction interface between the Nazca and South American plates. It ruptured a previously identified seismic gap along the Peruvian margin. We use Wide Swath InSAR observations acquired by the Envisat satellite in descending and ascending orbits to constrain coseismic slip distribution of this subduction earthquake. The data show movement of the coastal regions by as much as 85 cm in the line-of-sight of the satellite. Distributed-slip model indicates that the coseismic slip reaches values of about 5.5 m at a depth of ∼18–20 km. The slip is confined to less than 40 km depth, with most of the moment release located on the shallow parts of the interface above 30 km depth. The region with maximum coseismic slip in the InSAR model is located offshore, close to the seismic moment centroid location. The geodetic estimate of seismic moment is 1.23 × 1021 Nm ( M w 8.06), consistent with seismic estimates. The slip model inferred from the InSAR observations suggests that the Pisco earthquake ruptured only a portion of the seismic gap zone in Peru between 13.5° S and 14.5° S, hence there is still a significant seismic gap to the south of the 2007 event that has not experienced a large earthquake since at least 1687.  相似文献   

15.
The North Canterbury region marks the transition from Pacific plate subduction to continental collision in the South Island of New Zealand. Details of the seismicity, structure and tectonics of this region have been revealed by an 11-week microearthquake survey using 24 portable digital seismographs. Arrival time data from a well-recorded subset of microearthquakes have been combined with those from three explosions at the corners of the microearthquake network in a simultaneous inversion for both hypocentres and velocity structure. The velocity structure is consistent with the crust in North Canterbury being an extension of the converging Chatham Rise. The crust is about 27 km thick, and consists of an 11 km thick seismic upper crust and 7 km thick seismic lower crust, with the middle part of the crust being relatively aseismic. Seismic velocities are consistent with the upper and middle crust being composed of greywacke and schist respectively, while several lines of evidence suggest that the lower crust is the lower part of the old oceanic crust on which the overlying rocks were originally deposited.
The distribution of relocated earthquakes deeper than 15 km indicates that the seismic lower crust changes dip markedly near 43S. To the south-west it is subhorizontal, while to the north-east it dips north-west at about 10. Fault-plane solutions for these earthquakes also change near 43S. For events to the south, P -axes trend approximately normal to the plate boundary (reflecting continental collision), while for events to the north, T -axes are aligned down the dip of the subducted plate (reflecting slab pull). While lithospheric subduction is continuous across the transition, it is not clear whether the lower crust near 43S is flexed or torn.  相似文献   

16.
Summary. The seismic structure has been measured to a depth of about 3 km along a 30 km seismic profile in east central Ireland. This profile is unusual in that it is the S -wave velocity—depth structure that has been measured to a degree of precision more normally associated with P -wave results. One reason for this is that the sources used were quarry blasts which generated strong S -waves and short-period surface waves but rather weak P -waves.
The results show a layer of Carboniferous limestone with shear velocity 2.65 km−1 s overlying a layer with a velocity of 3.06 km s−1. This second layer was interpreted as Lower Palaeozoic strata (Silurian/Ordovician) since this velocity was evident in an inlier seen at the surface at the northern end of the line. A third refraction horizon, shear velocity 3.45 km s−1 and displaying a basinal structure, was also recognized. This may be Cambrian or Precambrian basement.  相似文献   

17.
Summary. The upper boundary of the descending oceanic plate is located by using PS -waves (converted from P to S at the boundary) in the Tohoku District, the north-eastern part of Honshu, Japan. the observed PS-P time data are well explained by a two-layered oceanic plate model composed of a thin low-velocity upper layer whose thickness is less than 10 km and a thick high-velocity lower layer; the upper and lower layers respectively have 6 per cent lower and 6 per cent higher velocity than the overriding mantle. the estimated location of the upper boundary is just above the upper seismic plane of the double-planed deep seismic zone. This result indicates that events in the upper seismic plane, at least in the depth range from 60 to 150 km, occur within the thin low-velocity layer on the surface of the oceanic plate.  相似文献   

18.
Summary. An interpretation of the geomagnetic inductive response function, C (ω, 0), observed at Kiruna in northern Sweden, is herein undertaken. The bounds of acceptable solutions are initially discovered by a Monte-Carlo random search procedure, and the best-fitting solutions are examined by the application of linear theory to the problem. The data are shown to have a higher degree of internal consistency than that described by the estimated variances of each datum. A further Monte-Carlo inversion of the variance- reduced data set gives solutions with well defined model parameters.
The two major features of the models are: (1) a small, or non-existent, electrical conductivity variation across the seismic Moho boundary, and (2) the unequivocal existence of an electrical asthenosphere, under the Fenno- scandian shield, beginning at a depth of between 155–185 km, and of 60km minimum thickness. Both of these observations have seismic counterparts.
Finally, possible mantle temperature profiles are deduced which depend on the assumptions and laboratory data employed.  相似文献   

19.
The crustal and upper mantle structure of the northwestern North Island of New Zealand is derived from the results of a seismic refraction experiment; shots were fired at the ends and middle of a 575 km-long line extending from Lake Taupo to Cape Reinga. The principal finding from the experiment is that the crust is 25 ± 2 km thick, and is underlain by what is interpreted to be an upper mantle of seismic velocity 7.6 ± 0.1 km s−1, that increases to 7.9 km s−1 at a depth of about 45 km. Crustal seismic velocities vary between 5.3 and 6.36 km s−1 with an average value of 6.04 km s−1. There are close geophysical and geological similarities between the north-western North Island of New Zealand and the Basin and Range province of the western United States. In particular, the conditions of low upper-mantle seismic velocities, thin crust with respect to surface elevation, and high heat-flow (70–100 mW m−2) observed in these two areas can be ascribed to their respective positions behind an active convergent margin for about the past 20 Myr.  相似文献   

20.
Blockage of regional seismic waves by the Teisseyre-Tornquist zone   总被引：1，自引：0，他引：1  
During the Group of Scientific Experts Technical Test (GSETT, second experiment, 22 April-2 June 1991), several hundred seismic events were located in Europe. Associating these events with the detecting stations-altogether 28 European stations including seven arrays participated in the GSETT-2 experiment-clearly shows that the Teisseyre-Tornquist Zone (TTZ) influences the propagation of regional seismic phases. Large explosions in the Bay of Gdańsk, for example, were observed by the well-established Scandinavian arrays'NORSAR (Δ 830km) and ARCESS (Δ 1650km), but not by the Polish station KSP (Δ 470km) nor by the new highly sensitive GERESS array (Δ 750km), both situated south-west of the TTZ. For events in central Europe with comparable magnitudes, we observe a similar increase of the detection threshold at stations located north-east of the TTZ in Scandinavia. to explain these observations, the wave propagation of Pn and Pg perpendicular to the TTZ was modelled for a profile from the Estonian/Russian border region to GERESS with Gaussian-beam seismograms. Published crustal and uppermost mantle models for Poland and for Europe were used as a starting point for developing a model of the TTZ. the observations cannot be explained only by a graben-like crustal structure with a jump in Moho depth from 30km to 50km. to defocus the seismic energy, the TTZ as a structural anomaly between eastern and western Europe must reach down into the upper mantle to a depth of at least about 200 km. the proposed model has such a deep-reaching root of the TTZ.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号