首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
Distinct styles of fluvial deposition in a Cambrian rift basin   总被引：1，自引：0，他引：1  
Process‐based and facies models to account for the origin of pre‐vegetation (i.e. pre‐Silurian) preserved fluvial sedimentary architectures remain poorly defined in terms of their ability to account for the nature of the fluvial conditions required to accumulate and preserve architectural elements in the absence of the stabilizing influence of vegetation. In pre‐vegetation fluvial successions, the repeated reworking of bars and minor channels that resulted in the generation and preservation of broad, tabular, stacked sandstone‐sheets has been previously regarded as the dominant sedimentary mechanism. This situation is closely analogous to modern‐day poorly vegetated systems developed in arid climatic settings. However, this study demonstrates the widespread presence of substantially more complex stratigraphic architectures. The Guarda Velha Formation of Southern Brazil is a >500 m‐thick synrift fluvial succession of Cambrian age that records the deposits and sedimentary architecture of three distinct fluvial successions: (i) an early rift‐stage system characterized by coarse‐grained channel elements indicative of a distributive pattern with flow transverse to the basin axis; and two coeval systems from the early‐ to climax‐rift stages that represent (ii) an axially directed, trunk fluvial system characterized by large‐scale amalgamated sandy braid‐bar elements, and (iii) a distributive fluvial system characterized by multi‐storey, sandy braided‐channel elements that flowed transverse to the basin axis. Integration of facies and architectural‐element analysis with regional stratigraphic basin analysis, palaeocurrent and pebble‐provenance analysis demonstrates the mechanisms responsible for preserving the varied range of fluvial architectures present in this pre‐vegetation, rift‐basin setting. Identified major controls that influenced pre‐vegetation fluvial sedimentary style include: (i) spatial and temporal variation in discharge regime; (ii) the varying sedimentological characteristics of distinct catchment areas; (iii) the role of tectonic basin configuration and its direct role in influencing palaeoflow direction and fluvial style, whereby both the axial and transverse fluvial systems undertook a distinctive response to syn‐depositional movement on basin‐bounding faults. Detailed architectural analyses of these deposits reveal significant variations in geometry, with characteristics considerably more complex than that of simple, laterally extensive, stacked sandstone‐sheets predicted by most existing depositional models for pre‐vegetation fluvial systems. These results suggest that the sheet‐braided style actually encompasses a varied number of different pre‐vegetation fluvial styles. Moreover, this study demonstrates that contemporaneous axial and transverse fluvial systems with distinctive architectural expressions can be preserved in the same overall tectonic and climatic setting.  相似文献   

2.
The Sivas Basin, located on the Central Anatolian Plateau in Turkey, is an elongate Oligo‐Miocene basin that contains numerous salt‐walled mini‐basins. Through field analysis, including stratigraphic section logging, facies analysis and geological mapping, a detailed tectono‐stratigraphic study of the Emirhan mini‐basin and its 2·6 km thick sediment fill has been undertaken. Three main palaeoenvironments are recognized – playa‐lake, braided stream and lacustrine – each corresponds to a relatively long‐lived depositional episode within a system that was dominated overall by the development of a distributive fluvial system. At local scale, this affects the geometry of the succession and influences facies distributions within preserved sequences. Sequences affected by wedge geometries are characterized by localized channelized sandstone bodies in the area of maximum subsidence and these pass laterally to floodplain mudstone towards the diaper; several internal unconformities are recognized. By contrast, sequences affected by hook geometries display narrow and steep drape‐fold geometries with no evidence of lateral facies change and apparent conformity in the preserved succession. The sediment fill of the Emirhan mini‐basin records the remobilization of diapir‐derived detritus and the presence of evaporitic bodies interbedded within the mini‐basin, implying the growth of salt walls expressed at the surface as palaeo‐topographic highs. The mini‐basin also records the signature of a regional change in stratigraphic assemblage, passing from playa‐lake facies to large‐scale highly amalgamated fluvial facies that represent progradation of the fluvial system. The initiation and evolution of this mini‐basin involves a variety of local and regional controls. Local factors include: (i) salt withdrawal, which influenced the rate and style of subsidence and consequently temporal and spatial variation in the stratigraphic assemblage and the stratal response related to halokinesis; and (ii) salt inflation, which influenced the topographic expression of the diapirs and consequently the occurrence of diapir‐derived detritus intercalated within the otherwise clastic‐dominated succession.  相似文献   

3.
The Strzelecki Group incorporates Berriasian to Albian, fluvial sediments deposited in the Gippsland Basin during initial rifting between Australia and Antarctica. Neocomian strata of the lowermost Strzelecki Group are assigned to the Tyers River Subgroup (exposed in the Tyers area) and the Rhyll Arkose (exposed on Phillip Island and the Mornington Peninsula). The Tyers River Subgroup incorporates two formations: Tyers Conglomerate and Rintoul Creek Formation. The latter is subdivided into the Locmany and Exalt Members. Ten fluvial sedimentary facies are identified in the lowermost Strzelecki Group: two gravelly facies; four sandy facies; and four mudrock facies. Associations of these facies indicate: (i) prevalence of gravelly braided‐river and alluvial‐fan settings during deposition of the Tyers Conglomerate; (ii) more sluggish, sandy braided to meandering fluvial systems during Locmany Member sedimentation; and (iii) a return to active, sandy, braided‐river settings for deposition of the Exalt Member. The Tyers Conglomerate and Rhyll Arkose rest on an irregular erosional surface incised into Palaeozoic rocks of the Lachlan Fold Belt. The overlying Rintoul Creek Formation incorporates more mature sediments where lithofacies associations varied according to base‐level change, variations in subsidence rates, and/or tectonic uplift of the principal sedimentsource terranes to the northwest.  相似文献   

4.
The Upper Cretaceous Bauru Group in south‐east Brazil consists of alluvial strata whose characteristics and distribution indicate a fluvial system developed in a semi‐arid to arid climate. Sections exposed within a 90 000 km2 study area in Minas Gerais State (in south‐eastern Brazil) were evaluated using facies and palaeosol analysis to formulate depositional and pedogenic models that may account for geomorphic and climate features. From east to west, the study succession records a gradual decrease in grain size, an increase in the width/thickness ratio in channels, a decrease in the lateral and vertical connectivity of channel deposits, and an increase in overbank deposits. The fluvial architecture indicates a braided channel belt, ephemeral ribbon–channels, and an unconfined fluvial facies from east to west in the study area. The lateral and vertical distribution of facies, stratigraphic architecture and palaeocurrent data suggest proximal, medial and distal portions of a progradational distributive fluvial system. The sedimentary dynamics were marked by the building and abandonment of channels related to processes of aggradation, vegetation growth and palaeosol generation. Macromorphological and micromorphological analyses have identified pedological and mineralogical features that indicate an arid to semi‐arid climate with a provenance from the north‐eastern part of the basin (Alto Paranaiba Uplift). From the proximal to the distal portions of the distributive fluvial system, the palaeosol development is different. In the proximal portion, the palaeosols are absent or poorly developed, allowing a possible general comparison with the present soil order: Inceptisols and Aridisols. In the medial portion of the fluvial system, the palaeosols are well‐developed and characterized by Bt, Btk, C and Ck horizons (Alfisols, Aridisols, Inceptisols and Entisols). Poorly drained to well‐drained palaeosols from the base to the top in the distal plain (Aridisols and Inceptisols) are associated with geomorphic and hydromorphic changes in the fluvial system due to progradational evolution. The genetic relationship between the fluvial architecture and the palaeosols enhances the understanding that the sedimentation and pedogenesis that occurs in different portions of the distributive fluvial system are related to the tectonic and climatic evolution of the basin.  相似文献   

5.
Traditional facies models lack quantitative information concerning sedimentological features: this significantly limits their value as references for comparison and guides to interpretation and subsurface prediction. This paper aims to demonstrate how a database methodology can be used to generate quantitative facies models for fluvial depositional systems. This approach is employed to generate a range of models, comprising sets of quantitative information on proportions, geometries, spatial relations and grain sizes of genetic units belonging to three different scales of observation (depositional elements, architectural elements and facies units). The method involves a sequential application of filters to the knowledge base that allows only database case studies that developed under appropriate boundary conditions to contribute to any particular model. Specific example facies models are presented for fluvial environmental types categorized on channel pattern, basin climatic regime and water‐discharge regime; the common adoption of these environmental types allows a straightforward comparison with existing qualitative models. The models presented here relate to: (i) the large‐scale architecture of single‐thread and braided river systems; (ii) meandering sub‐humid perennial systems; (iii) the intermediate‐scale and small‐scale architecture of dryland, braided ephemeral systems; (iv) the small‐scale architecture of sandy meandering systems; and (v) individual architectural features of a specific sedimentary environment (a terminal fluvial system) and its sub‐environments (architectural elements). Although the quantification of architectural properties represents the main advantage over qualitative facies models, other improvements include the capacity: (i) to model on different scales of interest; (ii) to categorize the model on a variety of environmental classes; (iii) to perform an objective synthesis of many real‐world case studies; (iv) to include variability‐related and knowledge‐related uncertainty in the model; and (v) to assess the role of preservation potential by comparing ancient‐system and modern‐system data input to the model.  相似文献   

6.
The seaward end of modern rivers is characterized by the interactions of marine and fluvial processes, a tract known as the fluvial to marine transition zone, which varies between systems due to the relative strength of these processes. To understand how fluvial and tidal process interactions and the fluvial to marine transition zone are preserved in the rock record, large‐scale outcrops of deltaic deposits of the Middle Jurassic Lajas Formation (Neuquén Basin, Argentina) have been investigated. Fluvial–tidal indicators consist of cyclically distributed carbonaceous drapes in unidirectional, seaward‐oriented cross‐stratifications, which are interpreted as the result of tidal modulation of the fluvial current in the inner part of the fluvial to marine transition zone. Heterolithic deposits with decimetre‐scale interbedding of coarser‐grained and finer‐grained facies with mixed fluvial and tidal affinities are interpreted to indicate fluvial discharge fluctuations (seasonality) and subordinate tidal influence. Many other potential tidal indicators are argued to be the result of fluvial–tidal interactions with overall fluvial dominance or of purely fluvial processes. No purely tidal or tide‐dominated facies were recognized in the studied deposits. Moreover, fluvial–tidal features are found mainly in deposits interpreted as interflood (forming during low river stage) in distal (delta front) or off‐axis (interdistributary) parts of the system. Along major channel axes, the interpreted fluvial to marine transition zone is mainly represented by the fluvial‐dominated section, whereas little or no tide‐dominated section is identified. The system is interpreted to have been hyposynchronous with a poorly developed turbidity maximum. These conditions and the architectural elements described, including major and minor distributary channels, terminal distributary channels, mouth bars and crevasse mouth bars, are consistent with an interpretation of a fluvial‐dominated, tide‐influenced delta system and with an estimated short backwater length and inferred microtidal conditions. The improved identification of process interactions, and their preservation in ancient fluvial to marine transition zones, is fundamental to refining interpretations of ancient deltaic successions.  相似文献   

7.
本文以西湖凹陷南部地区为例,首次将分支河流体系(Distributive Fluvial System)研究思路应用到东海盆地沉积体系的研究中来。通过总结大型分支河流体系形成条件,与国外案例类比认为西湖凹陷南部近物源,构造稳定,存在大型盆山体系,具备发育大型分支河流体系条件;在此基础上根据花港组岩心、古生物特征对分支河道类型进行了划分,认为分支河道类型以陆上环境下的分汊状辫状河道和单辫状河道为主,不同类型的河道均具备发育厚层砂体的潜能;结合古地形和沉积体系平面特征,对分支河流体系展布模式的研究结果表明,区域花港组时期发育两套分支河流体系,展布型式为自西斜坡分别至东北、东南向发散,分支河流体系末梢属于"轴向终止"型,且西湖凹陷轴向限制型河流与南部"分支河流体系"汇聚地带具有油气藏勘探潜力。  相似文献   

8.
Continental ‘overfilled’ conditions during rift initiation are conventionally explained as due to low creation of accommodation compared with sediment supply. Alternatively, sediment supply can be relatively high from the onset of rifting due to an antecedent drainage system. The alluvial Lower Group of the western Plio–Pleistocene Corinth rift is used to investigate the interaction of fluvial sedimentation with early rifting. This rift was obliquely superimposed on the Hellenide mountain belt from which it inherited a significant palaeorelief. Detailed sedimentary logging and mapping of the well‐exposed syn‐rift succession document the facies distributions, palaeocurrents and stratigraphic architecture. Magnetostratigraphy and biostratigraphy are used to date and correlate the alluvial succession across and between fault blocks. From 3·2 to 1·8 Ma, a transverse low sinuosity braided river system flowed north/north‐east to east across east–west‐striking active fault blocks (4 to 7 km in width). Deposits evolved downstream from coarse alluvial conglomerates to fine‐grained lacustrine deposits over 15 to 30 km. The length scale of facies belts is much greater than, and thus not directly controlled by, the width of the fault blocks. At its termination, the distributive river system built small, stacked deltas into a shallow lake margin. The presence of a major antecedent drainage system is supported by: (i) a single major sediment entry point; (ii) persistence of a main channel belt axis; (iii) downstream fining at the scale of the rift basin. The zones of maximum subsidence on individual faults are aligned with the persistent fluvial axis, suggesting that sediment supply influenced normal fault growth. Instead of low accommodation rate during the early rift phase, this study proposes that facies progradation can be controlled by continuous and high sediment supply from antecedent rivers.  相似文献   

9.
In terminal fluvial-fan systems, characteristic proximal to distal variations in sedimentary architectures are recognized to arise from progressive downstream loss of water discharge related to both infiltration and evaporation. This work aims to elucidate downstream trends in facies and architecture across the medial and distal zones of terminal-fan systems, which record transitions from deposits of channel elements to lobe-like and sheet-like elements. This is achieved via a detailed characterization of ancient ephemeral fluvial deposits of the well-exposed Kimmeridgian Tordillo Formation (Neuquén Basin, Argentina). The fine sand-prone and silt-prone succession associated with the medial to distal sectors of the system has been studied to understand relationships between depositional processes and resulting architectures. Facies and architectural-element analyses, and quantification of resulting sedimentological data at multiple scales, have been undertaken to characterize sedimentary facies, facies transitions, bed types, architectural elements and larger-scale architectural styles. Eight bed types with distinct internal facies transitions are defined and interpreted in terms of different types of flood events. Channelized and non-channelized architectural elements are defined based on their constituent bed types and their external geometry. The most common elements are terminal lobes, which are composite bodies within which largely unconfined sandy deposits are stacked in a compensational manner; a hierarchical arrangement of internal components is recognized. Proximal feeder-channel avulsion events likely controlled the evolution of terminal-lobe elements and their spatiotemporal shifts. Stratigraphic relations between architectural elements record system-wide trends, whereby a proximal sector dominated by channel elements passes downstream via a gradational transition to a medial sector dominated by sandy terminal-lobe elements, which in turn passes further downstream to a distal sector dominated by silty terminal lobe-margin and fringing deposits. This work enhances current understanding of the stratigraphic record of terminal fluvial systems at multiple scales, and provides insight that can be applied to predict the facies and architectural complexity of terminal fluvial successions.  相似文献   

10.
The mode of channel‐bend transformation (i.e. expansion, translation, rotation or a combination thereof) has a direct bearing on the dimensions, shape, bedding architecture and connectivity of point‐bar sandstone bodies within a fluvial meander belt, but is generally difficult to recognize in vertical outcrops. This study demonstrates how the bend transformation mode and relative rate of channel‐floor aggradation can be deciphered from longitudinal outcrop sections aligned parallel to the meander‐belt axis, as a crucial methodological aid to the reconstruction of ancient fluvial systems and the development of outcrop analogue models for fluvial petroleum reservoirs. The study focuses on single‐storey and multi‐storey fluvial meander‐belt sandstone bodies in the Palaeogene piggyback Boyabat Basin of north‐central Turkey. The sandstone bodies are several hundred metres wide, 5 to 40 m thick and encased in muddy floodplain deposits. The individual channel‐belt storeys are 5 to 9 m thick and their transverse sections show lateral‐accretion bed packages representing point bars. Point bars in longitudinal sections are recognizable as broad mounds whose parts with downstream‐inclined, subhorizontal and upstream‐inclined bedding represent, respectively, the bar downstream, central and upstream parts. The inter‐bar channel thalweg is recognizable as the transition zone between adjacent point‐bar bedsets with opposing dip directions into or out of the outcrop section. The diverging or converging adjacent thalweg trajectories, or a trajectory migrating in up‐valley direction, indicate point‐bar broadening and hence channel‐bend expansion. A concurrent down‐valley migration of adjacent trajectories indicates channel‐bend translation. Bend rotation is recognizable from the replacement of a depositional riffle by an erosional pool zone or vice versa along the thalweg trajectory. The steepness of the thalweg trajectory reflects the relative rate of channel‐floor aggradation. This study discusses further how the late‐stage foreland tectonics, with its alternating pulses of uplift and subsidence and a progressive narrowing of the basin, has forced aggradation of fluvial channels and caused vertical stacking of meander belts.  相似文献   

11.
The concept of stratigraphic base level, or the ratio between accommodation and sediment supply (A/S ratio), has been used to analyse the Rusty and Canyon Creek Members of the Campanian Ericson Sandstone in the Rock Springs Uplift, SW Wyoming, USA. The Ericson Sandstone was deposited under fluvial to estuarine conditions in a foreland basin setting influenced both by Sevier-style (thrust belt) tectonism and by more local, Laramide-style, foreland uplifts. The depositional setting was situated several tens to a few hundred kilometres from the nearest shoreline. Therefore, sea level change at the contemporaneous shoreline probably had little, if any, influence on the development of the sedimentary architecture. The Rusty Member shows an alternation between incised valleys filled by multi-storey estuarine channel sandstones showing palaeoflow to the south and delta plain sediments with single-storey channels with no evidence of tidal influence, which show palaeoflow to the east. This cyclicity is interpreted as recording repeated uplift of the Wind River Range to the north, causing valley incision and reduction of the A/S ratio. During quiescent periods, the A/S ratio increased allowing the valleys to fill and delta plain conditions to be subsequently re-established because of increased sediment supply from the thrust belt in the west. A regional unconformity at the base of the Canyon Creek Member truncates the Rusty Member, and represents a significant reduction of the A/S ratio caused by Laramide tectonic uplift. The Canyon Creek Member is a multi-storey, multi-lateral fluvial channel sandstone, where channel preservation and thickness increase upwards, suggesting an increase of the A/S ratio. The Canyon Creek Member channels are interpreted to have been sinuous, meandering channels from the observed sedimentary structures and fill patterns, despite their sand-rich nature. It is argued that grain size is a poor indicator of channel planform, and that there was very low preservation potential for fine material because of a relatively low A/S ratio. The top of the Canyon Creek Member is a regionally correlative surface marking an abrupt increase of the A/S ratio. This surface is termed an expansion surface, denoting an abrupt increase in accommodation. The overlying Almond Formation shows a single-storey alluvial architecture with a very high preservation of fine-grained material. An assumed correspondence in time of the Late Absaroka thrust phase in the Sevier belt to the west and the formation of the sharp top of the Canyon Creek Member suggests that the thrust phase caused a basin-wide abrupt increase of subsidence that changed the alluvial architecture. As an alternative to sequence stratigraphic nomenclature defined for strata controlled by shoreline movements, a scheme relating systems tracts and surfaces to changes in stratigraphic base level is proposed. Such a scheme is useful where correlations to shoreline strata are ambiguous or cannot be made, or where tectonics and climate are important controls.  相似文献   

12.
Ephemeral fluvial systems are commonly associated with arid to semi-arid climates. Although their complex sedimentology and depositional settings have been described in much detail, depositional models depicting detailed lateral and vertical relationships, and interactions with coeval depositional environments, are lacking compared to well-recognized meandering and braided fluvial systems. This study critically evaluates the applicability of current models for ephemeral fluvial systems to an ancient arid fluvial example of the Lower Jurassic Kayenta Formation of the Colorado Plateau, USA. The study employs detailed sedimentary logging, palaeocurrent analysis and photogrammetric panels across the regional extent of the Kayenta. A generic model that accounts for the detailed sedimentology of a sandy arid ephemeral fluvial system (drawing upon both ancient and geomorphological studies) is developed, along with analysis of the spatial and temporal interactions with the aeolian setting. Results show that the ephemeral system is dominated by laterally and vertically amalgamated, poorly channelized to sheet-like elements, with abundant upper flow regime flat beds and high sediment load structures formed between periods of lower flow regime conditions. Through interaction with a coeval aeolian system, most of the fluvial deposits are dominated by sand-grade sediment, unlike many modern ephemeral fluvial systems that contain a high proportion of conglomeratic and/or finer grained mudstone and siltstone deposits. During dominantly fluvial deposition, high width to thickness ratios are observed for channelized and sheet-like elements. However, with increasing aridity, the aeolian environment becomes dominant and fluvial deposition is restricted to interdune corridors, resulting in lower width to thickness ratio channels dominated by flash-flood and debris-flow facies. The data presented here, coupled with modern examples of ephemeral systems and flood regimes, suggest that ephemeral flow produces and preserves distinctive sedimentological traits that can not only be recognized in outcrops, but also within core.  相似文献   

13.
The recognition of terminal fluvial systems, otherwise termed 'terminal fans' or 'distributary fluvial fan systems', preserved in the ancient rock record is based primarily on the recognition of facies characteristics indicative of a progressive downstream decrease in: (i) fluvial discharge; (ii) channel depth and width; (iii) lateral and vertical connectivity of channel-fill elements; and (iv) evidence for channellized flow and a systematic increase in: (i) evidence for sheetflood deposition; (ii) aeolian and/or playa deposits; and (iii) channel bifurcation. However, despite these criteria having been applied previously to a variety of outcrop successions, there is still no unifying facies model that adequately accounts for the complex stratigraphic architectural relationships expected for such systems, based on the varied styles of fluvial activity and system interaction known from modern examples. Moreover, few previous studies have given significant consideration to the long-term temporal evolution of terminal fluvial fans. These issues are addressed by this study of the Permian (Leonardian/Artinskian) Organ Rock Formation of the Paradox Basin, South-east Utah. A detailed stratigraphic framework based on 84 sedimentary logs demonstrates proximal to distal variations in sedimentary style. Integration of these data with high-resolution architectural panels depicting the geometry and facies characteristics of individual fluvial elements has enabled the development of a series of depositional models that account for both the spatial and temporal evolution of the system and which are representative of: (i) initial progradation of the fluvial system into the Paradox foreland basin; (ii) retreat of the fluvial system and expansion of a distal aeolian dune system; (iii) the final phase of fluvial progradation following aeolian dune deflation; and (iv) the final retrogradation of the fluvial system back towards the hinterland.  相似文献   

14.
The repetitive sedimentology of many Precambrian sheet‐dominated fluvial sandstones favoured their attribution to unconfined depositional processes. This article presents outcrop evidence for deep‐channelled drainage in the 1·9 Ga Burnside River Formation of Kilohigok Basin, Arctic Canada. On the ground, sheet‐like sandbodies with ubiquitous cross‐bedding are at first consistent with classic, unconfined depositional models. However, satellite and oblique‐aerial imagery of sections up to 15 km wide and 500 m thick reveals the occurrence of incised palaeovalleys hosting clustered, kilometre‐scale, channel bodies with attached large foreset bars pointing to downstream‐lateral accretion, sand sheets with aspect ratios (i.e. width to thickness) as high as 2500, and scattered aeolian intervals. The genetic association of these architectural elements points to aggradational fluvial piedmonts composed of low‐relief unit bars generated by braidplain channels several metres deep. Preservation of aeolianites was facilitated by fluctuating groundwater table and accommodation. Fluvial piedmonts were transected by weakly sinuous channel belts up to 25 m deep and characterized by through‐going or tributary planform. Aspect ratios comparable with those of late Palaeozoic to modern braided channels disprove the inference that all Precambrian streams readily widened in response to increased discharge. Previous facies models for large‐scale Precambrian sheet‐braided rivers failed to depict entire channel forms, possibly because they could not be resolved by ground‐based observations. Based on their limited geomorphic variability and abundance of architectural elements with very high aspect ratios, this study recommends that large sheet‐braided fluvial systems should still be considered separately from their post‐Silurian (i.e. vegetated) braided counterparts. Parallels between sheet‐braided and modern dryland rivers do not, however, reconcile with the deep, perennial, channelized processes described here. Yet, distal sand‐bed and perennial reaches of modern sandur plains remain the closest analogue to sheet‐braided rivers. This conjecture contradicts the assumption that all Precambrian rivers were prone to simulate seasonal behaviours independently from their actual climate regime.  相似文献   

15.
The Salvan‐Dorénaz Basin formed during the Late Palaeozoic within the Aiguilles‐Rouges crystalline basement (Western Alps) as an asymmetric, intramontane graben elongated in a NE–SW direction and bounded by active faults. At least 1700 m of fluvial, alluvial fan and volcanic deposits provide evidence for a strong tectonic influence on deposition with long‐term, average subsidence rates of > 0·2 mm yr?1. The early basin fill was associated with coarse‐grained alluvial fans that were dominated by braided channels (unit I). These issued from the south‐western margin of the basin. The fans then retreated to a marginal position and were overlain by muddy floodplain deposits of an anastomosed fluvial system (unit II) that drained towards the NE. Deposition of thick muds resulted from a reduction in the axial fluvial gradient caused by accelerated tectonic subsidence. Overlying sand‐rich meandering river deposits (unit III) document a reversal in the drainage direction from the NE to the SW caused by synsedimentary tectonism, reflecting large‐scale topographic reorganization in this part of the Variscides with subsidence now preferentially in the W and SW and uplift in the E and NE. Coarse‐grained alluvial fan deposits (unit IV) repeatedly prograded into, and retreated from, the basin as documented by coarsening‐upward cycles tens of metres thick reflecting smaller scale tectonic cycles. Volcanism was active throughout the evolution of the basin, and U/Pb isotopic dating of the volcanic deposits restricts the time of basin development to the Late Carboniferous (308–295 Ma). 40Ar/39Ar ages of detrital white mica indicate rapid tectonic movements and exhumation of the nearby basement. In unit I, youngest ages are close to that of the host sediment, but the age spectrum is wide. In unit II, high subsidence and/or sedimentation rates coincide with very narrow age spectra, indicating small, homogeneous catchment areas. In unit III, age spectra became wider again and indicate growing catchment areas.  相似文献   

16.
Abstract

The Xihu sag, which is the largest petroliferous sub-basin of the East China Sea Shelf Basin, formed in a continental back-arc setting. The Oligocene Huagang Formation consisting of a fluvial–lacustrine succession deposited during the compressional stage is the prime hydrocarbon-bearing interval in the Xihu sag. A third-order sequence-stratigraphic framework has been built, and component sand-body characteristics were investigated based on seismic attribute analysis and well-log correlation. Two overall upward-fining sequences, and an internal low-accommodation systems tract (LAST) (fluvial successions characterised by amalgamated fluvial channel sand bodies interlayered with rare overbank deposits) and high-accommodation systems tract (HAST) (intervals dominated by overbank or lacustrine deposits) have been identified. The thick, multi-storied channel-fill sandstone bodies deposited along the central depression belt, capped by extensive overbank or lacustrine mud deposits, characterise each sequence and form favourable reservoir–seal associations. Proximal-to-distal changes in lithofacies associations were also analysed. The sequence-stratigraphic and lithofacies analysis suggest the existence of an axial, large-scale river channel system in the Oligocene Xihu sag. On the basis of the restoration of basin geomorphology and seismic facies analysis, the depositional architectures of the axial paleodrainage system have been reconstructed. Overall, the Huagang sequences represent the sedimentary evolution of a large-scale fluvial system sourced from axial and lateral supply areas, to form river deltas into an interior-draining basin-centre lake. Two major fluvio-lacustrine transgression–regression cycles have been recorded. During the transgression cycle, the fluvial morphology was dominated by braided fluvial style; whereas during the regression cycle, the fluvial morphology was characterised by a combination of multiple fluvial channel styles in the LAST, from upstream to downstream low-sinuosity braided, high-sinuosity braided and anastomosing fluvial channel patterns were distributed and then replaced by large-scale lake flooding in the HAST. The braided channel centre, paleobathymetric lows of channel networks and delta-front bodies are sand-prone units. The fluvial sedimentation was governed by multiple parameters: tectonics, paleogeomorphology and climate fluctuations. This integrated study on fluvial sedimentation and evolution of the Oligocene drainage system enable us to propose a conceptual model depicting fluvial channel styles and component sand-body architecture in lacustrine rift basins with axial plus transverse sediment supplies. This model can serve as a reference to illustrate channel-sand-body and associated reservoir architecture in similar types of drainage systems in terrestrial basins.  相似文献   

17.
Red or buff‐coloured sandstones and siltstones of fluvial origin comprise approximately 80% of the Ringerike Group, a late Silurian Old Red Sandstone (ORS) sequence that crops out extensively in the Oslo Region of southern Norway. These fluvial sediments are lithostratigraphically ascribed to two laterally equivalent formations—the Stubdal Formation (to the north of Oslo) and the Skien Formation (to the south of Oslo). The fluvial strata of each of the two formations have a distinct style of sandbody geometry, facies, provenance, and palaeocurrent direction. Within the Stubdal Formation, shallow channelized sandbodies, low‐ to upper‐flow regime sedimentary structures, a Caledonide provenance and a palaeoflow toward the southeast are evident. Within the Skien Formation, sandbody geometry is entirely sheet form, with upper‐flow regime sedimentary structures, a provenance from Precambrian rocks to the northern and local parts of the Oslo Region and a palaeoflow toward the east. No stratal contact can be seen between the two fluvial formations, due to a 15 km break in exposure between the southernmost Stubdal Formation and the northernmost Skien Formation. Relationships with adjacent formations indicate that they are diachronous, lateral equivalents. Given the abrupt change in sedimentary style between the two formations, it is proposed that a barrier had developed within the foreland basin, diverting the ORS fluvial systems in southern Norway, from a southward (north of Oslo), to an eastward direction (south of Oslo). This diversion had implications for depositional gradient, fluvial regime and provenance, resulting in the differences visible in the deposits of those rivers. The barrier invoked is arguably a Caledonide blind thrust fault that developed a topographic high, running east–west through the vicinity of Oslo, during the late Silurian. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

18.
Biotic forcing on river meandering is a highly debated topic in sedimentology. Vegetation is assumed to hold a vital role on channel stability and sinuosity, for example through bank stabilization and pedogenic production of cohesive clays. However, statistically solid and causal relationships between vegetation density and river sinuosity remain largely untested in natural systems. This study investigates physical and biotic forcings on channel sinuosity in the Bonneville Basin of Utah (USA), an endorheic depression flanked by active fluvial networks (‘washes’) that display diverse vegetation density and channel‐planform style. By means of remote sensing and ground‐data collection, 58 washes are considered, 0·1 to 90 km2 in surface area and drained by trunk channels <45 m wide and <1·2 m deep. Each wash is composed of a catchment basin connected downstream to an aggradational and distributive channel network. Statistically solid regressions highlight the primary roles played by base level and catchment size on fluvial morphogenesis. In contrast, no correlation is found between vegetation density and other parameters such as trunk‐channel width or surface area of the largest meander in a wash. Similarly, no statistical correlation exists between vegetation density and meander size or sinuosity index. Rather, larger and more sinuous meanders are invariably associated with lower vegetation density. These results are corroborated by field evidence showing that sparse vegetation promotes flow disturbance, channel branching and bar braiding instead of stabilizing sediment surfaces. Thus, river meandering is attributed to cohesion offered by mud retention within the endorheic basin, as well as discharge and stream‐power modulation along bifurcating and low‐gradient channel reaches. Hence, this work demonstrates how meandering‐channel patterns may arise from entirely physical forcings in the absence of vegetation.  相似文献   

19.
Herring-bone cross-stratification occurs in tributary mouth bar sediments less than 150 yr old in Warrena Creek near its confluence with the Castlereagh River some 2000 river kilometres from the sea in northern New South Wales. These streams have low gradients, with straight to anastomosing channels which become sinuous and distributive downstream. Channel beds are sand but banks are almost exclusively mud which is burrowed and extensively penetrated by roots. Herring-bone cross-stratification results from flow reversals in Warrena Creek during flood events. Flow direction depends upon discharge and stage in the creek relative to that in the adjacent river. The lithofacies resemble inter-tidal deposits and could easily be misidentified on the basis of herring-bone cross-stratification in an ancient sedimentary sequence. Herringbone cross-stratification should be regarded as diagnostic of depositional environments in which current directions are principally determined by reversals of water surface gradient, rather than by regional slope. Flow reversal phenomena may be a characteristic of very low gradient fluvial systems.  相似文献   

20.
Fluvial systems and their preserved stratigraphic expression as the fill of evolving basins are controlled by multiple factors, which can vary both spatially and temporally, including prevailing climate, sediment provenance, localized changes in the rates of creation and infill of accommodation in response to subsidence, and diversion by surface topographic features. In basins that develop in response to halokinesis, mobilized salt tends to be displaced by sediment loading to create a series of rapidly subsiding mini‐basins, each separated by growing salt walls. The style and pattern of fluvial sedimentation governs the rate at which accommodation becomes filled, whereas the rate of growth of basin‐bounding salt walls governs whether an emergent surface topography will develop that has the potential to divert and modify fluvial drainage pathways and thereby dictate the resultant fluvial stratigraphic architecture. Discerning the relative roles played by halokinesis and other factors, such as climate‐driven variations in the rate and style of sediment supply, is far from straightforward. Diverse stratigraphic architectures present in temporally equivalent, neighbouring salt‐walled mini‐basins demonstrate the effectiveness of topographically elevated salt walls as agents that partition and guide fluvial pathways, and thereby control the loci of accumulation of fluvial successions in evolving mini‐basins: drainage pathways can be focused into a single mini‐basin to preserve a sand‐prone fill style, whilst leaving adjoining basins relatively sand‐starved. By contrast, over the evolutionary history of a suite of salt‐walled mini‐basins, region‐wide changes in fluvial style can be shown to have been driven by changes in palaeoclimate and sediment‐delivery style. The Triassic Moenkopi Formation of the south‐western USA represents the preserved expression of a dryland fluvial system that accumulated across a broad, low‐relief alluvial plain, in a regressive continental to paralic setting. Within south‐eastern Utah, the Moenkopi Formation accumulated in a series of actively subsiding salt‐walled mini‐basins, ongoing evolution of which exerted a significant control on the style of drainage and resultant pattern of stratigraphic accumulation. Drainage pathways developed axial (parallel) to salt walls, resulting in compartmentalized accumulation of strata whereby neighbouring mini‐basins record significant variations in sedimentary style at the same stratigraphic level. Despite the complexities created by halokinetic controls, the signature of climate‐driven sediment delivery can be deciphered from the preserved succession by comparison with the stratigraphic expression of part of the system that accumulated beyond the influence of halokinesis, and this approach can be used to demonstrate regional variations in climate‐controlled styles of sediment delivery.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号