共查询到18条相似文献，搜索用时 187 毫秒
1.
本文根据大量实测数据,首次系统地报道了中国西北地区塔里木盆地、准噶尔盆地和柴达木盆地内的岩石热导率、岩石放射性生热率数据及其分布特征.对600多个岩石热导率和100多个实测岩石生热率的统计分析表明,沉积盆地中岩石的热物理性质与其岩性、埋藏深度和地层时代密切相关.随深度和地层时代的加大,岩石热导率增大;塔里木盆地的岩石热导率的总体平均值最大,而柴达木盆地的最小.岩石生热率在上地壳的分布是随深度的增加而减小的,但在沉积盆地的深度范围内几乎不变,其分布是均匀的,仅不同岩性的生热率差别较大.估算的岩石放射性生热产生的热量可以占到盆地地表热流的25%～45%.因此,岩石热物理性质的参数不仅与盆地的地温分布和大地热流特征密切相关,还可以为该地区盆地热历史恢复及深部地球物理的研究提供有效的参数和边界条件. 相似文献
2.
3.
塔里木盆地中央隆起区现今地温场分布特征及其与油气的关系 总被引：4，自引：0，他引：4
沉积盆地热状态研究不仅对于理解盆地成因演化具有重要意义, 而且还与油气生成和保存息息相关.根据塔里木盆地中央隆起区近120口钻井的试油温度资料和296块岩石热导率的测试结果, 获得了该区现今地温梯度、深部温度(1 000~5 000 m埋深及烃源岩顶界面)及大地热流的分布特征.结果表明, 该区热状态整体偏低(平均地温梯度为23.3 ℃/km, 平均大地热流为47.3 mW/m2), 二叠纪的岩浆活动对现今地温场已无影响.不同埋深的地层温度表现出与地温梯度及大地热流相似的分布模式, 即隆起区高、凹陷区低, 这一展布特征受基底起伏和形态控制.烃源岩顶部温度表明, 巴楚组、卡拉沙依组和良立塔格组等烃源岩层目前仍处于油气的有利保存状态; 巴楚隆起、卡塔克隆起西北部和古城墟隆起东部的中下寒武统烃源岩则处于良好的油气保存状态, 其他地区处于不利的油气保存状态.特别是, 该区已探明的油气田往往位于相对高温区, 并提出深部热流体的向上运移和聚集过程可能是造成异常高温的因素.这一发现表明盆地现今地温场特征与油气田分布具有良好的对应关系, 可为今后油气勘探提供地热学依据. 相似文献
4.
含油气盆地的地温场在油气的生成、运聚及盆地演化过程中起着十分重要的作用。柴达木盆地是中国西部重要的含油气盆地,位于喜马拉雅构造域的东北部,盆地现今地温场特征研究不仅为柴达木盆地及周缘陆内或板内大陆动力学及盆地动力学研究提供了科学依据,同时也是油气成烃、成藏及资源评价等工作的研究基础。柴达木盆地现今地温场研究的前期工作主要集中在盆地西部,盆地的北缘、东部开展的工作很少,所用研究数据多取自20世纪之前,盆地现今地温场特征的系统研究尚比较缺乏,亟须开展相关研究工作。文中采用先进的钻孔温度连续采集系统,实现了深井稳态测温工作的大规模化、高精度化,使用光学扫描法测试岩石热导率,获得了批量的、高精度的岩石热导率数据,新增了17口钻井的测温剖面。研究表明：柴达木盆地现今地温梯度平均为(28.6±4.6) ℃/km,地温梯度分布具有西部高,中、东部低的特点。柴达木盆地现今大地热流值平均(55.1±7.9) mW/m2,盆地不同构造单元大地热流分布存在差异。大地热流分布特征表明：柴达木盆地总体属于温盆,热流值低于我国大陆地区大地热流平均值,但高于西部的塔里木、准噶尔盆地。柴达木盆地现今地温场分布特征受地壳深部结构、岩石热导率性质及盆地构造等因素的控制。 相似文献
5.
区域地热特征及深部温度估算对于油气勘探和地热能资源评价和开发利用具有重要意义,长江下游地区是我国东部经济社会高度发达的地区,其能源需求大,区域热状态研究能为该区地热资源评价提供关键约束。通过整合长江下游地区已有的温度数据和实测岩石物性参数,勾勒出该区的现今地温场特征,并进一步估算其1 000~5 000 m埋深处的地层温度。研究表明,长江下游地区现今地温梯度为16~41 ℃/km,且以18~25 ℃/km居多,苏北盆地区呈现高地温梯度。大地热流值为48~80 mW/m2,其均值为60 mW/m2,表现为中等的地热状态,有利于油气和地热能形成。此外,长江下游地区深部地温估算表明,1 000 m埋深处的温度范围为30~54 ℃,2 000 m时温度范围为50~95 ℃,3 000 m时温度范围为65~130 ℃,4 000 m时温度范围为80~170 ℃,5 000 m时温度范围为100~210 ℃。区域深部地温的展布趋势呈NE向,高温区域集中在安徽南部和江苏东北部。结合60 ℃和120 ℃等温线的埋深分布及区域地质、地球化学和地热特征,初步探讨了该区油气与地热资源的有利区带及其相应的开发利用类型。 相似文献
6.
根据地温场温度分布的数学模型,应用有限元法模拟了深井巷道围岩地温场中4种常见隧道断面的岩石温度分布特征规律,揭示出地温场内温度分布和地热学参数及时间、空间之间的本质关系,实现地温场内温度分布的二维动态等值线表征,直观地再现了地温场内温度分布非稳态变化的动态过程。 相似文献
7.
本文以渭河盆地地温场为研究对象,在收集补充新地热井资料及分析测试样品的基础上,通过盆地深部结构、构造特征、地温场特征、热储层特征、地热资源量等分析,建立了盆地不同岩性岩石热导率与深度关系图版,确定了盆地地温场变化规律及地热田控制因素,提出了渭河盆地地热田形成模式。评价了盆地地热资源有利区,为盆地后续的开发利用提供了理论支持。研究认为渭河盆地热地温梯度分布在2.34～5.85℃/100m之间,平均地温梯度为3.50℃/100m,代表性大地热流68.33mw/m~2,地温梯度及不同深度地层温度具有东高西低、南高北低的特点。热导率总体上具有随深度的增加,逐渐增大的规律,热导率随深度增加主要受压实程度增强控制。相同深度条件下泥岩热导率最低,砂岩热导率居中、白云岩热导率最高。渭河盆地主要为层状地热田,盆地内地热通过热传导及热对流两种方式进行传递,以热传导为主。渭河盆地地热资源丰富,热储层可分为三种类型:①新生界砂岩孔隙型;②下古生界碳酸盐岩岩溶型;③断裂型。渭河盆地地热资源有利区主要分布于西安凹陷、固市凹陷。盆地地温场及地热田分布与莫霍面、软流圈上隆、岩石圈厚度减薄的深部背景密切相关,主要受地热传导和深大断裂热对流控制,是岩石圈深部结构、盆地构造、基底岩性、储盖组合等多因素共同作用下形成的。最后结合当前渭河盆地地热资源开发利用现状及存在问题,提出了地热开发利用建议。 相似文献
8.
大地热流值是表征地球热状态的重要参数,也是进行深部地温预测和评价一个地区地热资源的最基本数据。受钻孔测温的影响,盆地外的无钻孔测温地区缺少实测的大地热流值。目前的热流分布图都是依据相邻盆地的实测值进行插值绘制的,无钻孔区热流值可信度较低。由于岩石居里点与温度密切相关,可以通过居里面深度来研究地表热流值。本文依据东北地区现有的居里面深度分布图,结合实测的岩石热导率、岩石生热率数据和相应的地壳分层状况,计算了东北地区的大地热流值,重新绘制了中国东北地区精细的大地热流分布图。东北地区整体大地热流处于42.5~95 mW/m 2 之间,热流高值位于五大连池及敦化 密山断裂带海龙—牡丹江一带,松辽盆地内部、小兴安岭和长春 延吉缝合带也有局部的高热流值。热流高值与居里面隆起区域有较高的一致性,即居里面隆起处热流较高,而坳陷区热流较低。本次研究填补了中国东部地区热流实测值空白,为该区深部地温预测和地热资源评价提供了更加准确的参数。 相似文献
9.
松辽盆地不仅是世界上已发现油气资源最为丰富的陆相沉积盆地之一,同时也存在十分丰富的中低温地热资源,是当前油气勘探和地热勘探的主力区块。本文结合近10年来新增的一大批测温数据,借助571口钻井地层测温资料和150余个岩石热物性参数,重新剖析了松辽盆地现今地温场分布特征及其主控因素。研究表明,松辽盆地地温梯度在19～55 ℃/km之间,平均为41. 4 ℃/km,现今大地热流分布在38. 9～111. 2 mW/m 2之间,平均为78. 9 mW/m2。相比其他盆地而言,松辽盆地具有高温“热盆”的特点。平面上,盆地中央坳陷区地温梯度和大地热流均较高。嫩江组底界面温度约为15～88℃,平均为48. 6℃;姚家组底界面的温度为18～95℃,平均值为53℃;青山口组底界面的温度为25～128℃,平均值为64℃;泉四段底界面的温度为26～131℃,平均值为67℃。松辽盆地现今温度分布主要受到成盆演化动力学背景、岩石热物性特征、岩浆作用等多种因素的影响。松辽盆地经历了强烈的区域伸展作用和岩石圈减薄,并发育丰富的基底断裂和地壳断裂,造成深部地幔热物质沿着基底断裂运移至浅部,因此地表热流偏高。 相似文献
10.
淮北煤田的高温热害问题愈发突出,但目前对该区系统的地温场特征及大地热流分布研究非常稀少.在系统分析淮北煤田大量地面钻孔井温测井数据和井下巷道围岩温度测试数据的基础上,结合72块岩石样品的热导率测试结果,全面阐述了该区现今地温梯度和大地热流的分布特征.研究表明:淮北煤田现今地温梯度众值介于1.80~2.80 ℃/100 m之间,平均地温梯度为2.42 ℃/100 m;大地热流值变化范围为39.52~74.12 mW/m2,平均热流值为55.72 mW/m2,地温梯度和热流值均低于同处华北板块的其他盆地以及南部的淮南煤田;大地热流受地温梯度控制明显,两者分布较为相似,整体表现为南高北低、西高东低的特点.结果表明,区内现今地温场和热流分布主要受区域地质背景和区内构造格局的控制. 相似文献
11.
Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m2, with a mean value of 79±7 mW/m2. Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m3, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m2.Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m2 in the first stage to 75 mW/m2 in the second stage, and then 90 mW/m2 in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension. 相似文献
12.
New values of surface heat flow are reported for 13 deep borehole locations in the Northeast German Basin (NEGB) ranging from 68 to 91 mW m− 2 with a mean of 77 ± 3 mW m− 2. The values are derived from continuous temperature logs, measured thermal conductivity, and log-derived radiogenic heat production. The heat-flow values are supposed free of effects from surface palaeoclimatic temperature variations, from regional as well as local fluid flow and from thermal refraction in the vicinity of salt structures and thus represent unperturbed crustal heat flow. Two-D numerical lithospheric thermal models are developed for a 500 km section along the DEKORP-BASIN 9601 deep seismic line across the basin with a north-eastward extension across the Tornquist Zone. A detailed conceptual model of crustal structure and composition, thermal conductivity, and heat production distribution is developed. Different boundary conditions for the thickness of thermal lithosphere were used to fit surface heat flow. The best fit is achieved with a thickness of thermal lithosphere of about 75 km beneath the NEGB. This estimate is corroborated by seismological studies and somewhat less than typical for stabilized Phanerozoic lithosphere. Modelled Moho temperatures in the basin are about 800 °C; heat flow from the mantle is about 35 to 40 mW m− 2. In the southernmost part of the section, beneath the Harz Mountains, higher Moho temperatures up to 900 to 1000 °C are shown. While the relatively high level of surface heat flow in the NEGB obviously is of longer wave length and related to lithosphere thickness, changes in crustal structure and composition are responsible for short-wave-length anomalies. 相似文献
13.
江汉盆地当阳复向斜当深3井实测地温剖面和样品热导率测试结果表明:其现今地温梯度为20～24℃/km,热流值为56mW/m2,体现了盆地发育于扬子稳定陆块的大地构造属性。基于7个磷灰石裂变径迹样品和大量镜质体反射率古温标数据进行的热史恢复表明,盆地构造—热演化经历了前印支期的低热流(50～60mW/m2)和小剥蚀量(50～200m),印支期的高热流(约80mW/m2)及燕山期与喜马拉雅期的低热流(50～60mW/m2)与大剥蚀量(1100～2400m)的不同演化阶段,反映了盆地和区域构造演化过程的阶段性。受沉积剥蚀及盆地构造—热演化的控制,生油岩系的生烃阶段与过程具有多期次的特征。 相似文献
14.
We analyze the thermal gradient distribution of the Junggar basin based on oil-test and well-logging temperature data. The basin-wide average thermal gradient in the depth interval of 0–4000 m is 22.6 °C/km, which is lower than other sedimentary basins in China. We report 21 measured terrestrial heat flow values based on detailed thermal conductivity data and systematical steady-state temperature data. These values vary from 27.0 to 54.1 mW/m2 with a mean of 41.8 ± 7.8 mW/m2. The Junggar basin appears to be a cool basin in terms of its thermal regime. The heat flow distribution within the basin shows the following characteristics. (1) The heat flow decreases from the Luliang Uplift to the Southern Depression; (2) relatively high heat flow values over 50 mW/m2 are confined to the northern part of the Eastern Uplift and the adjacent parts of the Eastern Luliang Uplift and Central Depression; (3) The lowest heat flow of smaller than 35 mW/m2 occurs in the southern parts of the basin. This low thermal regime of the Junggar basin is consistent with the geodynamic setting, the extrusion of plates around the basin, the considerably thick crust, the dense lithospheric mantle, the relatively stable continental basement of the basin, low heat generation and underground water flow of the basin. The heat flow of this basin is of great significance to oil exploration and hydrocarbon resource assessment, because it bears directly on issues of petroleum source-rock maturation. Almost all oil fields are limited to the areas of higher heat flows. The relatively low heat flow values in the Junggar basin will deepen the maturity threshold, making the deep-seated widespread Permian and Jurassic source rocks in the Junggar basin favorable for oil and gas generation. In addition, the maturity evolution of the Lower Jurassic Badaowan Group (J1b) and Middle Jurassic Xishanyao Group (J2x) were calculated based on the thermal data and burial depth. The maturity of the Jurassic source rocks of the Central Depression and Southern Depression increases with depth. The source rocks only reached an early maturity with a R0 of 0.5–0.7% in the Wulungu Depression, the Luliang Uplift and the Western Uplift, whereas they did not enter the maturity window (R0 < 0.5%) in the Eastern Uplift of the basin. This maturity evolution will provide information of source kitchen for the Jurassic exploration. 相似文献
15.
An updated analysis of geothermal data from the highland area of eastern Brazil has been carried out and the characteristics of regional variations in geothermal gradients and heat flow examined. The database employed includes results of geothermal measurements at 45 localities. The results indicate that the Salvador craton and the adjacent metamorphic fold belts northeastern parts of the study area are characterized by geothermal gradients in the range of 6–17°C/km. The estimated heat flow values fall in the range of 28–53 mW/m2, with low values in the cratonic area relative to the fold belts. On the other hand, the São Francisco craton and the intracratonic São Francisco sedimentary basin in the southwestern parts are characterized by relatively higher gradient values, in the range of 14–42°C/km, with the corresponding heat flow values falling in the range of 36–89 mW/m2. Maps of regional variations indicate that high heat flow anomaly in the São Francisco craton is limited to areas of sedimentary cover, to the west of the Espinhaço mountain belt. Crustal thermal models have been developed to examine the implications of the observed intracratonic variations in heat flow. The thermal models take into consideration variation of thermal conductivity with temperature as well as change of radiogenic heat generation with depth. Vertical distributions of seismic velocities were used in obtaining estimates of radiogenic heat production in crustal layers. Crustal temperatures are calculated based on a procedure that makes simultaneous use of the Kirchoff and Generalized Integral Transforms, providing thereby analytical solutions in 2D and 3D geometry. The results point to temperature variations of up to 300°C at the Moho depth, between the northern Salvador and southern São Francisco cratons. There are indications that differences in rheological properties, related to thermal field, are responsible for the contrasting styles of deformation patterns in the adjacent metamorphic fold belts. 相似文献
16.
中国大陆地区沉积盆地热状况剖面 总被引：10，自引：0，他引：10
根据我国沉积盆地大量实测的地温、大地热流资料和岩石热物理性质数据,分析、总结了由东至西我国主要沉积盆地的现今地温、大地热流、深部地热及岩石圈热结构的分布状况及其差异,为我国的地热研究的进一步深入提供了可靠的基础资料。 相似文献
17.
Accurate assessment of deep geothermal resources remains a challenge from the practical point of view. Parameter uncertainties and partial knowledge of initial conditions limit the prediction of subsurface temperatures using a variety of thermal models strongly unreliable, and the temperature is highly dependent on the radiogenic heat production in the geological layers mainly affected by a number of factors including the concentrations of uranium, thorium and potassium, and rock density. In this paper, geostatistical methods were applied to investigate the spatial distribution of radiogenic elements (e.g., uranium, thorium, potassium) and their corresponding concentrations and radiogenic heat production. A representative region measuring 35 km?×?80 km in the southwestern Québec, and covering the domains of Portneuf-Mauricie, Morin Terrane and Parc des Laurentides in the Grenville Province was selected for this study because of its easy accessibility. Analysis results show that the concentrations of uranium, thorium and potassium for most rocks of the Grenville basement in the research region are in the range of 1–2 ppm, 3–10 ppm and 1–4%, respectively. Furthermore, 90% of the total samples analysed in this study show a uranium concentration of less than 3 ppm, 64% of the samples show a thorium concentration of less than 5 ppm, and 56% of the samples show a potassium concentration of less than 3%. This paper engaged both the ordinary kriging interpolation and sequential Gaussian simulation (SGS) methods to study the spatial distribution of radiogenic elements. Using density data for specific rocks, the distribution of radiogenic heat production in the study area of the southwestern Grenville Province was also simulated using the SGS method. Conclusively, results show that the difference between the minimum and the maximum value of radiogenic heat production is 30%, considering a significant proportion of heterogeneity in rock density. 相似文献