首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Within the Kinsale Formation (Lower Carboniferous) of southern Ireland are pebbly sandstones and conglomerates contained in what is known locally as the Garryvoe conglomerate facies. In this facies there are three main groups of lithologies: (a) heterolithic mudrocks and sandstones characterized by a wide variety of wave-produced structures; (b) sandstones dominated by swaley cross-stratification (SCS), parallel lamination, and rare hummocky cross-stratification (HCS); and (c) pebbly sandstones and conglomerates occurring as discrete beds or as gravel clasts dispersed through SCS sets. Successions of the facies comprise units of heterolithic mudrock and rippled sandstone alternating repeatedly with coarsening-upward units of SCS pebbly sandstone capped by top-surface granule and pebble lags. The Garryvoe conglomerate facies accumulated in a system of offshore bars on a muddy shallow-marine shelf that was dominated by waves and currents generated by storms. Sands and gravels were bypassed from a contemporaneous northerly coastal zone to the shelf, where they were moulded by the storm-generated flow into low, broad, sand ridges (offshore bars). The elongate bars were spaced kilometres apart, oriented obliquely to the coast, and separated by muddy interbar troughs. Their surfaces were largely covered by hummocky and swaley forms. Long-term, gradual seaward migration of the offshore bars concentrated gravels on landward flanks from the dispersed pebbly sands that were on the crests and seaward flanks. Exceptionally intense storms could form laterally extensive winnowed gravel lags above thinned bar sequences. Such storms could also flush gravel-bearing turbidity currents into muddy interbar trough areas.  相似文献   

2.
“Coarsening upward” successions typical of subtidal sand bars have been recognised in the NE-trending linear sandstone bodies which occur within marine shale in the Eze-Aku Formation (Upper Cretaceous) of southeastern Nigeria.The ideal succession, 15–20 m thick, consists of the following units from bottom to top: (1) bioturbated grey siltstone (offshore mud); (2) wave-ripple-laminated, fine-grained well-sorted sandstone (offshore sands); (3) trough and tabular, cross-bedded medium-grained sandstone with channelled base (subtidal channel complex); (4) trough cross-bedded, medium-grained sandstone with bimodal-bipolar paleocurrent pattern (subtidal bar); (5) coarse, pebbly trough cross-bedded sandstone with wave-rippled top, rare burrows and a bimodal-bipolar paleocurrent pattern (subtidal bar). A sixth facies, not a part of the normal sequence, consists of coarse, carbonate-cemented pebbly sandstone grading into pure shell-limestone (bar margin).The sand bars seem to have grown on a shallow mud-bottomed, wave-worked inland sea inhabited by burrowers. A model for the stages of the vertical growth of the bar is presented.  相似文献   

3.
N. L. BANKS 《Sedimentology》1973,20(2):213-228
The Duolbasgaissa Formation, Lower Cambrian, of northern Norway consists of 550 m of mineralogically and texturally mature sandstones with subordinate siltstones, mudstones and conglomerates. Four facies are defined on the basis of grain size, bed thickness and sedimentary structures. Facies 1–3 consist of a variety of erosively-based, cross-stratified and parallel-stratified sandstones interbedded with siltstone and mudstone. Many of these sandstones show evidence of deposition from waning currents. Facies 4 consists of trough cross-bedded sandstones with sets up to 4 m thick. Symmetrical ripples and bioturbation are ubiquitous. Bipolar palaeocurrent distributions are common to all facies and one mode is usually strongly dominant. Lateral facies variations and sedimentary structures suggest that deposition took place in a tide-dominated, offshore, shallow marine environment in which maximum sediment transport probably occurred when storm generated waves enhanced tidal currents. The four facies are thought to represent the deposits of various parts of tidal sediment transport paths such as exist in modern seas around Great Britain. Small scale coarsening upward sequences may represent the superposition of facies independently of changing water depth. Lack of information prevents a detailed palaeogeographic reconstruction. It is suggested that sand body shape is not accurately predictable.  相似文献   

4.
The 2 to 5 km thick, sandstone-dominated (>90%) Jura Quartzite is an extreme example of a mature Neoproterozoic sandstone, previously interpreted as a tide-influenced shelf deposit and herein re-interpreted within a fluvio-tidal deltaic depositional model. Three issues are addressed: (i) evidence for the re-interpretation from tidal shelf to tidal delta; (ii) reasons for vertical facies uniformity; and (iii) sand supply mechanisms to form thick tidal-shelf sandstones. The predominant facies (compound cross-bedded, coarse-grained sandstones) represents the lower parts of metres to tens of metres high, transverse fluvio-tidal bedforms with superimposed smaller bedforms. Ubiquitous erosional surfaces, some with granule–pebble lags, record erosion of the upper parts of those bedforms. There was selective preservation of the higher energy, topographically-lower, parts of channel-bar systems. Strongly asymmetrical, bimodal, palaeocurrents are interpreted as due to associated selective preservation of fluvially-enhanced ebb tidal currents. Finer-grained facies are scarce, due largely to suspended sediment bypass. They record deposition in lower-energy environments, including channel mouth bars, between and down depositional-dip of higher energy fluvio-ebb tidal bars. The lack of wave-formed sedimentary structures and low continuity of mudstone and sandstone interbeds, support deposition in a non-shelf setting. Hence, a sand-rich, fluvial–tidal, current-dominated, largely sub-tidal, delta setting is proposed. This new interpretation avoids the problem of transporting large amounts of coarse sand to a shelf. Facies uniformity and vertical stacking are likely due to sediment oversupply and bypass rather than balanced sediment supply and subsidence rates. However, facies evidence of relative sea level changes is difficult to recognise, which is attributed to: (i) the areally extensive and polygenetic nature of the preserved facies, and (ii) a large stored sediment buffer that dampened response to relative sea-level and/or sediment supply changes. Consideration of preservation bias towards high-energy deposits may be more generally relevant, especially to thick Neoproterozoic and Lower Palaeozoic marine sandstones.  相似文献   

5.
Tidal-shelf sedimentation: an example from the Scottish Dalradian   总被引：2，自引：0，他引：2  
The Jura Quartzite, a formation of probably late Precambrian metasediments over 5 km thick from the Caledonian belt in Southwest Scotland, has been divided into a coarse and three fine facies. The former comprises cross-bedded sands with some laminated sands and silt horizons, interpreted as the deposits of shallow marine tidal dunes and other bedforms together with some beach units. Deposition from suspension of silt and sand formed climbing dunes while largescale erosion produced flat or channelled surfaces. The fine facies comprise laterally persistent, parallel and cross-laminated sand units from millimetres to decimetres thick, interbedded with muds. The coarse and fine facies can be finely interbedded, the former sometimes filling decimetre deep, straight channels, cut in the latter. The fine facies exhibit structures indicative of deposition from decelerating currents and are interpreted as shallow marine storm deposits. The facies are compared with a model developed from published observations on modern shelf areas. Zones of erosion, large and small dunes, flat bedded sand and mud are considered to be the end product of a wide spectrum of tidal and storm conditions. During severe storms the fair weather tidal dunes may be modified or washed out, new dunes may be initiated downcurrent of the normal dune field while storm-sand layers are deposited in the distal zones. Hence, the nature of the preserved sediment blanket reflects the rare severe storm event rather than normal tidal conditions. The Jura Quartzite was deposited in a tidal gulf intimately connected with an ocean basin. The north-northeast directed palaeocurrent modes are probably roughly parallel to the coastline.  相似文献   

6.
The Sierra Grande Formation (Silurian-Early Devonian) consists of quartz arenites associated with clast supported conglomerates, mudstones, shales and ironstones. Eight sedimentary facies are recognized: cross-stratified and massive sandstone, plane bedded sandstone, ripple laminated sandstone, interstratified sandstone and mudstone, laminated mudstone and shale, oolitic ironstone, massive conglomerate and sheet conglomerate lags. These facies are interpreted as shallow marine deposits, ranging from foreshore to inner platform environments. Facies associations, based on vertical relationships among lithofacies, suggest several depositional zones: (a) beach to upper shoreface, with abundant plane bedded and massive bioturbated sandstones; (b) upper shoreface to breaker zone, characterized by multistorey cross-stratified and massive sandstone bodies interpreted as subtidal longshore-flow induced sand bars; (c) subtidal, nearshore tidal sand bars, consisting of upward fining sandstone sequences; (d) lower shoreface zone, dominated by ripple laminated sandstone, associated with cross-stratified and horizontal laminated sandstone, formed by translatory and oscillatory flows; and (e) transitional nearshore-offshore and inner platform zones, with heterolithic and pelitic successions, and oolitic ironstone horizons. Tidal currents, fair weather waves and storm events interacted during the deposition of the Sierra Grande Formation. However, the relevant features of the siliciclastics suggest that fair weather and storm waves were the most important mechanisms in sediment accumulation. The Silurian-Lower Devonian platform was part of a continental interior sag located between southern South America and southern Africa. The Sierra Grande Formation was deposited during a second order sea level rise, in which a shallow epeiric sea flooded a deeply weathered low relief continent.  相似文献   

7.
The depositional facies and environments were unraveling by studying 21 subsurface sections from ten oilfields in the central and southern Iraq and a large number of thin sections of the Nahr Umr (siliciclastic deposit) Formation (Albian). This formation is mainly composed of sandstone interlaminated with minor siltstone and shale, with occurrence of thin limestone beds. Nahr Umr Formation is subdivided into three lithostratigraphic units of variable thicknesses on the basis of lithological variations and log characters. Mineralogically and texturally, mature quartz arenite and sandstones are the common type of the Nahr Umr Formation. The sandstones are cemented by silica and calcite material and have had a complex digenetic history. Compaction, dissolution, and replacements are the main diagenetic processes. Prodelta, distal bar, distributary mouth bar, distributary channel, over bank, and tidal channel are the main depositional environments recognized for the Nahr Umr Formation, within the studied wells. This formation was deposited in shallow marine and fluvial–deltaic environments and exhibit progradational succession of facies. Eight sedimentary facies that have been identified in the Nahr Umr Formation include claystone lithofacies, claystone siltstone lithofacies, lenticular-bedded sandstone–mudstone lithofacies, wavy-bedded sandstone–mudstone lithofacies, flaser-bedded sandstone–mudstone lithofacies, parallel and cross lamination sandstone lithofacies, trough cross-bedded sandstone lithofacies, and planar cross-bedded sandstone lithofacies. The depositional model of the Nahr Umr Formation environment was built based on the lithofacies association concepts.  相似文献   

8.
The Neoproterozoic Kansapathar Sandstone of the Chattisgarh basin, a shallow marine shelf bar sequence, consists of mineralogically and texturally mature sandstones with subordinate siltstones, mudstones and conglomerates. The sediments were transported, reworked and deposited in subtidal environments by strong tidal currents of macrotidal regime as well as storms, and accumulated as discrete shoaling-upward features, separated from each other by muddy to low-energy sandy deposits. The sandbodies developed into shoaling up linear bars, often more than a kilometre in length, through accretion of thick cross-stratified units in transverse directions under the influence of ebb and flood tidal currents, as well as in longitudinal direction affected by southeasterly flowing along-shore currents. The aggrading upper surfaces of the bars experienced protracted reworking by strong oscillatory wave currents leading to extensive development of subaqueous 2D or 3D dunes mantled with lag pebble deposits at different points. With continued shoaling and progradation, the bars amalgamated into large sandstone sheets with the development of high energy beach deposits and coastal sand flats in the uppermost part of the sequence. The presence of rill marks, flat-topped ripples, wrinkle marks, desiccation cracks and adhesion warts point to intertidal conditions with intermittent exposure. The high energy sandstone bars overlie a thick mudstone-dominated shelf sequence across a sharp interface indicating rapid change in the sea-level, provenance, rate of sediment generation and sediment input, and circulation condition in the shelf. A quiet muddy shelf was replaced by a major sand-depositing environment with strong, open marine circulation. An interplay of tidal currents, oscillatory wave currents and storm currents generated a complex flow pattern that varied in time and space from bimodal-bipolar to strongly unimodal flows. Close parallelism of wave ripple crests, trend of linear bars and unidirectional flows suggest that the elongate bars were parallel to sub-parallel to the coastline, and were strongly influenced by along shore drift. The inferred coastline was broadly N-S. The large-scale structures in the bar sandstones, emplacement of vast amount of sand and migration of large bedforms under strong macrotidal currents collectively indicate that the Kansapathar shelf was intimately connected with an open ocean basin towards north-northwest.  相似文献   

9.
The lower part of the Cretaceous Sego Sandstone Member of the Mancos Shale in east‐central Utah contains three 10‐ to 20‐m thick layers of tide‐deposited sandstone arranged in a forward‐ and then backward‐stepping stacking pattern. Each layer of tidal sandstone formed during an episode of shoreline regression and transgression, and offshore wave‐influenced marine deposits separating these layers formed after subsequent shoreline transgression and marine ravinement. Detailed facies architecture studies of these deposits suggest sandstone layers formed on broad tide‐influenced river deltas during a time of fluctuating relative sea‐level. Shale‐dominated offshore marine deposits gradually shoal and become more sandstone‐rich upward to the base of a tidal sandstone layer. The tidal sandstones have sharp erosional bases that formed as falling relative sea‐level allowed tides to scour offshore marine deposits. The tidal sandstones were deposited as ebb migrating tidal bars aggraded on delta fronts. Most delta top deposits were stripped during transgression. Where the distal edge of a deltaic sandstone is exposed, a sharp‐based stack of tidal bar deposits successively fines upward recording a landward shift in deposition after maximum lowstand. Where more proximal parts of a deltaic‐sandstone are exposed, a sharp‐based upward‐coarsening succession of late highstand tidal bar deposits is locally cut by fluvial valleys, or tide‐eroded estuaries, formed during relative sea‐level lowstand or early stages of a subsequent transgression. Estuary fills are highly variable, reflecting local depositional processes and variable rates of sediment supply along the coastline. Lateral juxtaposition of regressive deltaic deposits and incised transgressive estuarine fills produced marked facies changes in sandstone layers along strike. Estuarine fills cut into the forward‐stepped deltaic sandstone tend to be more deeply incised and richer in sandstone than those cut into the backward‐stepped deltaic sandstone. Tidal currents strongly influenced deposition during both forced regression and subsequent transgression of shorelines. This contrasts with sandstones in similar basinal settings elsewhere, which have been interpreted as tidally influenced only in transgressive parts of depositional successions.  相似文献   

10.
The fine to very coarse sandstones, gravelly sandstones and intraformational conglomerates of the mid to upper Brownstones are excellently exposed in large fresh road cuttings near Ross-on-Wye in the southern Welsh Borders. Detailed mapping of the cuttings reveals an hierarchically ordered system of mainly erosional bedding contacts which divide the beds into hierarchically structured packets. The smallest packets, involving cross-bedded or plane-bedded sediments or combinations of these, are consistent with deposition from strongly three-dimensional and often large, loosely periodic to non-repetitive bars. A locally developed facies of trough cross-bedded sandstones points to the infrequent occurrence of fields of three-dimensional dunes. The bar- and dune-related units are grouped into large complexes (related to the storeys of other workers), with an internal geometry consistent with lateral accretion (in places clearly symmetrical) combined with forward accretion on shoals (sand flats) within a braided channel, as in the South Saskatchewan River. In their turn, the complexes are combined into laterally extensive, conglomerate-floored sandstone sheets several metres thick. These seem to express the wandering of a braided channel across a mud-draped floodplain. To judge from the sedimentary structures and textures, the thickness of the lateral accretion deposits, and the size of the major scours, the bankfull discharge of the rivers was a few thousand cumecs each.  相似文献   

11.
Lake margin sedimentary systems have been the subject of only limited study. The cyclic Middle Devonian lacustrine succession of Northern Scotland contains repeated developments of shore zone sandstones and thus provides an ideal location for the study of these units. The cycles comprise deep lake, shallow lake, playa and shore zone facies. Detailed field observations are presented alongside ground penetrating radar data which has aided large‐scale and three‐dimensional characterization of the shore zone sand bodies. Loading and discrete channel forms are recognized in thin‐bedded sandstones within the lower portion of the lake shore zone successions. Up‐section, the sandstone beds appear to become amalgamated, forming subtle low angle accretionary bar complexes. Where imaged on the radar profiles, the repeated development of shoreward migrating features succeeded by more shallow angled lakeward accreting surfaces is recognized; these are ascribed to washover and swash–backwash processes, respectively. The orientation of these features is similar to palaeocurrent measurements from oscillation ripples, suggesting an alignment of the shore zone bars perpendicular to the prevailing wind direction. Further loaded sandstone beds and sand‐filled shallow channel features overlie the bar forms. The context of the shore zone facies allows the controls on its formation to be examined. The shore zone sandstones overlie playa facies which contain abundant desiccation horizons, reflecting the most arid phase in the climatically controlled lacustrine cycle. As climatic conditions ameliorated, the rejuvenation of fluvial systems resulted in the transport of sand out into the basin. Initial deposition was limited to intermittent events where sediment was laid down on a water‐saturated substrate. High resolution fluctuations in lake level resulted in periodic short‐lived reworking events along the lake margins which produced amalgamated sands, forming low relief bars. Shore zone reworking is likely to have occurred over a wide  area as the lake margin migrated back and forth, and gradually transgressed.  相似文献   

12.
The 3000 Ma Mozaan Group comprises three interacting sedimentary environments: (1) braided alluvial plain, (2) offshore shelf, and (3) tidalites. The predominance of planar cross-bedded sandstones in the fluvial sequence indicates that sedimentation was dominated by southerly accreting transverse bars in a distal braided river system. However, the development of lenticular conglomerates suggests the occasional formation of longitudinal gravel bars, probably during periods of high discharge. Argillaceous sediments, some of which are ferrugineous represent an interplay between clastic sedimentation and chemical precipitation on a prograding shelf. The abnormal thickness of these shelf deposits is attributed to facies stacking. The absence of barrier beach deposits suggests that the marginal environment was controlled by macrotidal conditions. Two varieties of tidal sequences are recognized. The first, which forms the classic upward-fining succession, contains ubiquitous ebb-dominated paleocurrents and is interpreted as having been influenced by tidal asymmetry. The other, which lacks the mixed flat unit, was apparently generated by tidal currents flowing parallel to the coastline. The nature of the Mozaan sediments suggests at least incipient cratonization in eastern South Africa 3000 Ma ago.  相似文献   

13.
The first sandstone unit of the Esdolomada Member of the Roda Formation (hereafter referred to as ‘Esdolomada 1’) was formed by a laterally‐migrating, shelf tidal bar. This interpretation is based on detailed mapping of the bedding surfaces on the digital terrain model of the outcrop built from light detection and ranging data and outcrop photomosaics combined with vertical measured sections. The Esdolomada 1 sandbody migrated laterally (i.e. transverse to the tidal currents) towards the south‐west along slightly inclined (1.6° to 4.6°) master bedding surfaces. The locally dominant tidal current flowed to the north‐west. This current direction is indicated by the presence of stacked sets of high‐angle (average 21°) cross‐stratification formed by dunes that migrated in this direction, apparently in an approximately coast‐parallel direction. The tidal bar contains sets and cosets of medium‐grained cross‐stratified sandstone that stack to reach a thickness of about 5·5 m. Individual cross‐bed sets average about 50 cm thick (with a range of 10 to 70 cm) and have lengths of ca 130 to 250 m in a direction perpendicular to the palaeocurrent. Set thickness decreases in the direction of migration, towards the south‐west, and the degree of bioturbation increases, so that the cross‐bedded sandstones gradually change into highly bioturbated finer‐grained and thinner‐bedded sandstones lacking any cross‐stratification. The rate of thinning of individual dune sets as they are traced down any obliquely‐accreting master surface is some 40 cm per 100 m (0·004) for the older, thicker sandstones, whereas the younger, thinner beds thin at a rate of 15 cm over 100 m (0·0015). The tidal bar has a sharp base and top and is encased in finer‐grained bioturbated, marine sandstones. The Esdolomada bar crest was oriented north‐west to south‐east, parallel to the tidal palaeocurrents and to the nearby palaeoshoreline, but built by lateral accretion towards the south‐west. Lateral outbuilding generated a flat‐topped bar with a measured width of about 1700 m, and a preserved height of 5·5 m. The bar, disconnected from a genetically related south‐westward prograding delta some 2 km to the north‐east, developed during the transgressive phase of a sedimentary cycle. The tidal bar was most probably initiated as a delta‐attached bar at the toesets of the delta front and during transgression evolved into a detached tidal bar.  相似文献   

14.
Stacked shallow marine cycles in the Lower Ordovician, Bell Island Group, of Bell Island, Newfoundland, show upward thickening and upward coarsening sequences which were deposited on a storm-affected shelf. In the Beach Formation each cycle has a facies sequence comprised, from base to top, of dark grey mudstones, light grey mudstones, tabular sandstones and mudstones, lenticular sandstones and mudstones, and thick bedded lenticular sandstones, reflecting a progressive increase of wave orbital velocities at the sediment surface. The mudstones and tabular sandstones reflect an environment in which the sea floor lay in the lower part of the wave orbital velocity field and in which tempestites were deposited as widespread sheets from weak combined flow currents. The lenticular sandstones in the succeeding facies are wave reworked sands, commonly lying in erosional hollows and having erosional tops and internal hummocky cross-stratification. Planar lamination is relatively uncommon and sole marks are mainly absent. In this facies oscillatory currents were dominant and accumulated sand in patches generally 10–30 m in diameter. The facies formed on the inner shelf where the oscillatory currents generated by storm waves had powerful erosional effects and also determined the depositional bedforms. Mud partings and second-order set boundaries within sandstone beds are believed to separate the products of individual storms so that many lenticular sandstone beds represent the amalgamation of several event beds. This interpretation has important implications for attempts to estimate event frequency by counting sandstone beds within a sequence and for estimates of sand budgets during storm events. The thick bedded lenticular facies appears to have been formed by erosion of the mud beds between the lenticular sands, leading to nearly complete amalgamation of several lenticular sand bodies except for residual mud partings. In the overlying Redmans Formation the process of amalgamation progressed even further so that nearly all the mud partings were removed, resulting in the formation of thick bedded tabular sandstones. Sequence stratigraphic analysis of the cyclical sequence suggests that the cycles were eustatically controlled. The rising limb of the sea level curve produced only the dark grey mudstone part of the cycle while the remainder of the cycle was deposited on the falling limb. There is a gradational but rapid facies transition from the tabular to the lenticular sandstone facies which is interpreted as occurring at the inflexion point on the falling limb. The thick bedded facies of the Beach Formation and the thick bedded tabular facies of the Redmans Formation represent periods of maximum sea level fall. The stacked cycles in the Beach Formation are interpreted as an aggradational, high frequency sequence or parasequence set bounded at the top by a sequence boundary and succeeded by the three aggradational parasequences of the Redmans Formation. The recognition of storm facies with sandstone beds of very different bed length has important implications for the reservoir modelling of such facies.  相似文献   

15.
Laminated cryptalgal carbonates occur in the Precambrian Copper Harbor Conglomerate of northern Michigan, which was deposited in the Keweenawan Trough, an aborted proto-oceanic rift. This unit is composed of three major facies deposited by braided streams on a large alluvial-fan complex. Coarse clastics were deposited in braided channels, predominantly as longitudinal bars, whereas cross-bedded sandstones were deposited by migrating dunes or linguoid bars. Fine-grained overbank deposits accumulated in abandoned channels. Gypsum moulds and carbonate-filled cracks suggest an arid climate during deposition. Stromatolites interstratified with these clastic facies occur as laterally linked drapes over cobbles, as laterally linked contorted beds in mudstone, as oncolites, and as poorly developed mats in coarse sandstones. Stromatolites also are interbedded with oolitic beds and intraclastic conglomerates. Stromatolitic microstructure consists of alternating detrital and carbonate laminae, and open-space structures. Radial-fibrous calcite fans are superimposed on the laminae. The laminae are interpreted as algal in origin, whereas the origin of the radial fibrous calcite is problematic. The stromatolites are inferred to have grown in lakes which occupied abandoned channels on the fan surface. Standing water on a permeable alluvial fan in an arid climate requires a high water table maintained by high precipitation, or local elevation of the water table, possibly due to the close proximity of a lake. Occurrence of stromatolites in the upper part of the Copper Harbor Conglomerate near the base of the lacustrine Nonesuch Shale suggests that these depositional sites may have been near the Nonesuch Lake.  相似文献   

16.
  相似文献   

17.
Willis  Bhattacharya  Gabel  & White 《Sedimentology》1999,46(4):667-688
The Frewens sandstone is composed of two elongate tide-influenced sandstone bodies that are positioned directly above and slightly landward of a more wave-influenced lobate sandstone. The 20-km-long, 3-km-wide Frewens sandstone bodies coarsen upwards and fine away from their axes, have gradational bases and margins and have eroded tops abruptly overlain by marine shales. These sandstones are superbly exposed in large cliffs on the banks of the South Fork of the Powder River in central Wyoming, USA. The deposits change upwards from thinly interbedded sandstones and mudstones to metre-thick heterolithic cross-strata and, finally, to metres-thick sandstone-dominated cross-strata. There is abundant evidence for tidal modulation of depositional flows; however, palaeocurrents were strongly ebb-dominated and nearly parallel the trend of sandstone-body elongation. Detailed mapping of stratal geometry and facies across these exposures shows a complex internal architecture. Large-scale bedding units within sandstone bodies are defined by alternations in facies, bed thickness and the abundance of shales. Such bedsets are inclined (5°–15°) in walls oriented parallel to palaeoflow and gradually decrease in dip over hundreds of metres as they extend from the sandstone-dominated deposits higher in a sandstone body to muddier deposits lower in the body. Where viewed perpendicular to palaeoflow, bedsets are 100-metre-wide lenses that shingle off the sandstone-body axis towards its margins. The sandstone bodies are interpreted as sand ridge deposits formed on the shoreface of a tide-influenced river delta. Metres-thick cross-strata in the upper parts of sandstone bodies resemble deposits of bars (sandwaves) formed where tidal currents moved across shallows and the tops of tidal ridges. Heterolithic deposits lower in sandstone bodies record fluctuating currents caused by ebb and flood tides and varying river discharge. Erosion surfaces capping sandstone bodies record tidal ravinement. The tidal ridges were abandoned following transgression and covered with marine mud as waters deepened.  相似文献   

18.
Four major sedimentary facies are present in coarse-grained, ice-marginal deposits from central East Jylland, Denmark. Facies A and B are matrix-supported gravels deposited by subaerial sediment gravity flows as mudflows (facies A) and debris flows (facies B). Facies C consists of clast-supported, water-laid gravels and facies D are cross-bedded sand and granules. The facies can be grouped into three facies associations related to the supraglacial and proglacial environments: (1) the flow-till association is made up of alternating beds of remobilized glacial mixton (facies A) and well-sorted cross-bedded sand (facies D); (2) the outwash apron association resembles the sediments of alluvial fans in containing coarse-grained debris-flow deposits (facies B), water-laid gravel deposited by sheet floods (facies C) and cross-bedded sand and granules (facies D) from braided distributaries; (3) the valley sandur association comprises water-laid gravel (facies C) interpreted as sheet bars and longitudinal bars interbedded with cross-bedded sand and granules (facies D) deposited in channels between bars in a braided environment.The general coarsening-upward trend of the sedimentary sequences caused by the transition of bars and channel-dominated facies to debris-flow-dominated facies indicate an increasing proximality of the outwash deposits, picturing the advance and still stand of a large continental lowland ice-sheet. The depositional properties suggest that sedimentation was caused by melting along a relatively steep, active glacier margin as a first step towards the final vanishing of the Late Weichselian icesheet (the East Jylland ice) covering eastern Denmark.  相似文献   

19.
The meander-belt deposit comprises a sandstone resting on an erosion surface and bounded above and below by massive varicoloured mudstones with rootlet traces. The sandstone unit is composed of six bodies separated from one another, horizontally, by erosion surfaces; together the bodies form a single multilateral sand body. Internally each body is composed of lateral accretion units inclined at up to 6° from the horizontal. Vertical sequences of facies show significant variations but the grain size generally fines upwards. The principal lithofacies within the sandstones are, in common ascending order, intraformational conglomerate, large-scale cross-bedded, horizontal bedded and small-scale cross-laminated sandstone, and alternate sandstones and mudstones. Current directions are normal to the true slope of accretion surfaces and show insignificant scatter within individual bodies but are very diverse overall. Five of the sand bodies are believed to represent individual point bars, and one body an abandoned channel. Together they comprise the meander belt. The river was subject to very variable discharges and carried high suspended loads. Analysis of vertical profiles indicates that grain size segregation along the length of the point bars caused differentiation of the bars into coarse-grained heads and sandy tails.  相似文献   

20.
B. K. LEVELL 《Sedimentology》1980,27(5):539-557
The Lower Sandfjord Formation is a 1.5 km thick late Precambrian sandstone. It is a remarkably homogeneous unit consisting largely (98%) of cross-bedded, texturally and mineralogically mature, coarse or medium sandstone, and is interpreted as a shallow marine deposit. This interpretation is based on the maturity, the exclusively tabular bed geometry, occasional sets of herring-bone cross-bedding and most importantly, the abundance of sheet-like pebble layers only 1–5 grain diameters thick and sometimes overlain by thin siltstone drapes. Various different types of compound cross-bedding, all of which show evidence of reversing currents, are interpreted as sub-tidal sandwaves. These sets range in thickness from 0.5 to 14 m, and in conjunction with the overall abundance of cross-bedding probably indicate strong tidal currents. A tide-dominated current regime is also considered essential to explain the derivation of such large quantities of sand from the contemporary coasts. It is suggested that sand transport offshore took place during the erosional transgression of abandoned delta lobes. However, the predominance of a single, easterly, mode in the palaeocurrent patterns suggests that the tidal currents were reinforced by some other current system. The predominantly unimodal palaeocurrent patterns and the coarse, sand-rich nature of the succession, taken together with the thickness do not superficially seem likely characteristics for a shallow marine sequence. Nevertheless this study appears to demonstrate that such deposits were formed on tidal shelves in at least late Precambrian time.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号