首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Experimental determinations of the dry liquidus temperatures of two pantellerite, and two pantelleritic trachyte glasses in the pressure range 0–2 kilobars, show minima in the liquidus curves between 0.1 and 0.2 kb. The pantellerite minima are 830°–850° C; the trachyte minima are 920°–940° C. At pressures below the minima a separate vapour phase co-exists with liquid, at higher pressures the intrinsic volatiles are completely soluble in the liquid and the liquidus curves have a positivedT/dP. Similar results have been obtained from a range of other pantelleritic glasses, and together with consistent alkali feldspar compositions (from a wide range of experimental conditions) are indicative of a close approach to equilibrium. The form of the liquidus curves above the minima, if rellecting natural conditions, offers a ready explanation of the near-or super-liquidus aspect of many peralkaline lavas. The temperatures in these anhydrous experiments are 100°–150° C higher than those for similar compositions in the presence of excess water. (Also, in the presence of excess water, the crystallization sequences in the natural glasses are profoundly modified, with pyroxene appearing on the liquidus). At lower pressures, feldspar is the liquidus phase in the dry pantellerites, but is joined by quartz around 1 kb, and superseded by quartz at higher pressures. As pantellerites with quartz phenocrysts are uncommon, low pressure equilibration is perhaps normal in these magmas. Feidspar is the usual liquidus phase in the trachytes, except at very low pressures where it is preceded by iron oxide. Preliminary studies at 5 kb indicate that the pantelleritic and trachytic liquidus curves are converging (in the range 950°–1000° C). Crystallization sequences, and the forms and positions of the solidus curves are therefore of vital importance. These, together with the vapour-present/vapour-absent conditions, are currently under investigation.  相似文献   

2.
According to the precipitation and δ18O data obtained during the GEWEX Asian Monsoon Experiment–Tibet Intensive Observation Period, based on the knowledge that δ18O is lower in precipitation formed from ocean air mass vapour than that from local evaporation vapour, the water vapour sources can be identified from the δ18O values in precipitation. We attempt to give the identification criterion of δ18O values in precipitation. The threshold values chosen to distinguish between ocean and local sources are δ18O < ?20‰ and δ18O > ?13‰ respectively. According to this criterion, the proportion of local evaporation‐formed precipitation and ocean air‐mass‐formed precipitation in total precipitation was estimated. The average value of precipitation at three sites (NODA, Amdo and AQB) is 249·76 mm. Among this, precipitation formed directly by the ocean air mass vapour is 80·08 mm at most. Precipitation formed by water vapour evaporated from local places is 117·05 mm at least. That is to say that precipitation formed directly by the ocean air mass vapour accounts for 32·06% of the total precipitation at most. Precipitation formed by water vapour evaporated from local places accounts for 46·86% of the total precipitation at least. At least 21·8% of the total precipitation came from water vapour that was evaporated on the way and transported by the monsoon circulation. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

3.
Annual fluxes of canopy‐level heat, water vapour and carbon dioxide were measured using eddy covariance both above the aspen overstory (Populus tremuloides Michx.) and hazelnut understory (Corylus cornuta Marsh.) of a boreal aspen forest (53·629 °N 106·200 °W). Partitioning of the fluxes between overstory and understory components allowed the calculation of canopy conductance to water vapour for both species. On a seasonal basis, the canopy conductance of the aspen accounted for 70% of the surface conductance, with the latter a strong function of the forest's leaf area index. On a half‐hour basis, the canopy conductance of both species decreased non‐linearly as the leaf‐surface saturation deficits increased, and was best parameterized and showed similar sensitivities to a modified form of the Ball–Berry–Woodrow index, where relative humidity was replaced with the reciprocal of the saturation deficit. The negative feedback between the forest evaporation and the saturation deficit in the convective boundary layer varied from weak when the forest was at full leaf to strong when the forest was developing or loosing leaves. The coupling between the air at the leaf surface and the convective boundary layer also varied seasonally, with coupling decreasing with increasing leaf area. Compared with coniferous boreal forests, the seasonal changes in leaf area had a unique impact on vegetation–atmosphere interactions. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

4.
The double torsion testing method has been used to determine catastrophic and subcritical crack propagation parameters for pre-cracked specimens of Westerly granite and Black gabbro under a number of environmental conditions.The critical stress intensity factor for catastrophic crack propagation (fracture toughness) of granite and gabbro has been measured at temperatures from 20 to 400°C, in a vacuum. At 20°C, the fracture toughness of Westerly granite was 1.79 ± 0.02 MPa · m12, and for two blocks of Black gabbro it was 3.03 ± 0.08 MPa · m12 and 2.71 ± 0.15 MPa ·m12, respectively. These values are very close to those reported by other investigators for tests conducted in air of ambient humidity at room temperature. For both rocks, fracture toughness at first increased slightly, and then decreased steadily on raising the temperature above ambient conditions. This behaviour is explained in terms of the density and distribution of thermally induced microcracks, as determined by quantitative optical microscopy.Subcritical crack growth behaviour has been studied at temperatures up to 300°C, and under water vapour at pressures of 0.6 to 15 kPa. Both the load relaxation and incremental constant displacement rate forms of the double torsion testing method were utilised to generate stress intensity factor/crack velocity diagrams. Crack growth was measured over the velocity range 5 × 10?3 to 10?7 m · s?1. Increasing both temperature and water vapour pressure resulted in substantially higher crack growth rates. The overall effect of raising the temperature over the range studied here (20–300°C) was to increase the crack growth rate in granite and gabbro by ～5 and 7 orders of magnitude, respectively, at constant stress intensity factor and vapour pressure of water. For both rocks, the slopes of stress intensity factor/crack velocity curves were sensitive to changes in both temperature and water vapour pressure at low values of the latter parameter. Slopes fell substantially on raising the water vapour pressure, but were relatively insensitive to changes in temperature at these higher pressures. No subcritical crack growth limit was encountered.Estimates of the uncertainty in our experimental data are given. From the results of multiple load relaxation experiments on Westerly granite specimens, we estimate the uncertainty in position of stress intensity factor/crack velocity curves along the stress intensity axis to be c. 10% of the fracture toughness, and the uncertainty in slope of such curves to be c. 12%.Problems associated with the extrapolation of our experimental data to regions of higher effective confining pressure in the Earth's crust are discussed.  相似文献   

5.
Space–time fluctuations of the Earth’s emitted Thermal Infrared (TIR) radiation observed from satellite from months to weeks before an earthquake are reported in several studies. Among the others, a Robust Satellite data analysis Technique (RST) was proposed (and applied to different satellite sensors in various geo-tectonic contexts) to discriminate anomalous signal transients possibly associated with earthquake occurrence from normal TIR signal fluctuations due to other possible causes (e.g. solar diurnal–annual cycle, meteorological conditions, changes in observational conditions, etc.). Variations in satellite view angle depending on satellite’s passages (for polar satellites) and atmospheric water vapour fluctuations were recognized in the past as the main factors affecting the residual signal variability reducing the overall Signal-to-Noise (S/N) ratio and the potential of the RST-based approach in identifying seismically related thermal anomalies. In this paper we focus on both factors for the first time, applying the RST approach to geostationary satellites (which guarantees stable view angles) and using Land Surface Temperature (LST) data products (which are less affected by atmospheric water vapour variability) instead of just TIR radiances at the sensor.The first results, obtained in the case of the Abruzzo earthquake (6 April 2009, MW ∼ 6.3) by analyzing 6 years of SEVIRI (Spinning Enhanced Visible and Infrared Imager on board the geostationary Meteosat Second Generation satellite) LST products provided by EUMETSAT, seem to confirm the major sensitivity of the proposed approach in detecting perturbations of the Earth’s thermal emission a few days before the main shock. The results achieved in terms of increased S/N ratio (in validation) and reduced “false alarms” rate (in confutation) are discussed comparing results obtained by applying RST to LST products with those achieved by applying an identical RST analysis (using the same MSG-SEVIRI 2005–2010 data-set) to the simple TIR radiances at the sensor.  相似文献   

6.
The Cloud Imaging and Particle Size (CIPS) instrument on the Aeronomy of the Ice in the Mesosphere (AIM) spacecraft is a 4-camera nadir pointed imager with a bandpass centered at 265 nm and a field of view of 120°×80°. CIPS observes polar mesospheric clouds (PMCs) against the sunlit Rayleigh-scattered background. At individual polar locations approximately 5 km×5 km in area, CIPS observes the same volume of air seven times over a range of scattering angles from about 35° to 150°. These multi-angle observations allow the identification and extraction of the PMC scattered radiance from the Rayleigh-scattered background. We utilize the fact that the former has a highly asymmetric phase function about 90° scattering angle, while the latter has a phase function that is symmetric. The retrieved PMC phase function can then be interpreted to obtain PMC particle size distributions. We describe a technique for identification of PMCs in the CIPS observations through the separation of the Rayleigh and PMC radiances. PMC phase function results are shown for the first season of CIPS observations. Assuming the particles are oblate spheroids with an axial ratio of 2, and a Gaussian distribution of width 14 nm, we find the phase functions are consistent with mean radii between 50 and 60 nm. These results are similar to those discussed by Hervig et al. [2009. Interpretation of SOFIE PMC measurements: cloud identification and derivation of mass density, particle shape, and particle size. J. Atmos. Sol. Terr. Phys., in review.] in this issue from the Solar Occultation for Ice Experiment (SOFIE) which also flies on the AIM satellite.  相似文献   

7.
A numerical model is proposed that describes the interaction between raindrops and water vapour near the planetary boundary layer to explain the “amount effect”. This model relates the intensity to the isotopic composition of precipitation. The model resolves raindrop sizes, and explicitly includes: (1) the isotopic equilibration time of raindrops that is drop‐size dependent; (2) raindrop transit times through the atmosphere; and (3) the evolution of the isotopic composition of vapour at various rain rates. At high rain rate, the precipitation through a layer is less equilibrated with the vapour because the isotopic equilibration time is long compared to the fast transit time, and there is a preponderance of large drops, which take longer to equilibrate. The δ18O of vapour in the lower atmosphere becomes lower as a result of the interaction with these raindrops of low δ18O, and the degree of depletion of 18O is higher when precipitation rates are high. The model reproduces time‐series observations of isotopic composition of precipitation in Japan, and a vapour replenishment rate is inferred by either advection or evaporation of about 5% of the precipitation rate. The results could be the basis for a new parameterization of the isotopic equilibration for different precipitation types and rates in General Circulation Models (GCMs). When the model is applied to a GCM, this parameterization is important for places where precipitation occurs at cold temperatures (<15 °C). Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

8.
The Raman spectra of carbonaceous material (CM) from 19 metasediment samples collected from six widely separated areas of Southwest Japan and metamorphosed at temperatures from 165 to 655°C show systematic changes with metamorphic temperature that can be classified into four types: low‐grade CM (c. 150–280°C), medium‐grade CM (c. 280–400°C), high‐grade CM (c. 400–650°C), and well‐crystallized graphite (> c. 650°C). The Raman spectra of low‐grade CM exhibit features typical of amorphous carbon, in which several disordered bands (D‐band) appear in the first‐order region. In the Raman spectra of medium‐grade CM, the graphite band (G‐band) can be recognized and several abrupt changes occur in the trends for several band parameters. The observed changes indicate that CM starts to transform from amorphous carbon to crystallized graphite at around 280°C, and this transformation continues until 400°C. The G‐band becomes the most prominent peak at high‐grade CM suggesting that the CM structure is close to that of well‐crystallized graphite. In the highest temperature sample of 655°C, the Raman spectra of CM show a strong G‐band with almost no recognizable D‐band, implying the CM grain is well‐crystallized graphite. In the Raman spectra of low‐ to medium‐grade CM, comparisons of several band parameters with the known metamorphic temperature show inverse correlations between metamorphic temperature and the full width at half maximum (FWHM) of the D1‐ and D2‐bands. These correlations are calibrated as new Raman CM geothermometers, applicable in the range of c. 150–400°C. Details of the methodology for peak decomposition of Raman spectra from the low to medium temperature range are also discussed with the aim of establishing a robust and user‐friendly geothermometer.  相似文献   

9.
A search is conducted to detect nanocrystals in a sample of apogranitic pseudotachylite, which is a product of extremely strong crushing of granite in a seismogenic fault. Raman spectroscopy revealed nanocrystals of quartz measuring approximately 17 to 25 nm and low-temperature albite ranging from 8 to 30 nm. The crystallographic cell in the nanocrystals is deformed. The internal stresses which might have been responsible for these deformations vary from approximately −300 (compression) to +480 (tension) MPa. It is found that after having been exposed to high pressure (1 GPa) and temperature (470–500°C for 10 minutes and 550–600°C for 16 minutes), the nanocrystals of quartz reduced in size to ≈10 nm, and the nanocrystals of albite, to 13 nm. At the same time, the level of tension in the lattice spacing of quartz increased.  相似文献   

10.
Temperature and relative humidity measurements were made within and outside a lowland fen in eastern England during 2009 and 2010. Summer temperatures were found to be on average 0.24°C lower within the fen than outside, whilst summer vapour pressures were found to be on average 0.074 kPa higher within the fen. In contrast, winter temperatures were found to be higher within the fen by an average of 0.03°C. These differences may be expected to influence evapotranspiration estimates derived using data from each of the sites. The influence of the location of meteorological measurements on evapotranspiration estimates was therefore evaluated. The existence of a wetland microclimate results in up to a 7% reduction in annual reference evapotranspiration compared to a site surrounded by arable farmland only 5.5 km away.  相似文献   

11.
A fluid-inclusion study has been performed on quartzite nodules of stromboli volcano hosted by calc-alkaline lavas of both the Strombolicchio (200 ka) and Paleostromboli II (60 ka) periods. The nodules are mainly composed of quartz crystals with subordinate plagioclase and K-feldspar. Small interstitial minerals such as plagioclase, K-feldspar, clinopyroxene, biotite, and quartz are also found, together with glass. Muscovite, epidote and zircon occur as accessory minerals. Different quartzite nodules occur: (1) equigranular polygonal granoblastic quartzite nodules forming a polygonal texture with clear triple points; (2) inequigranular polygonal granoblastic quartzite nodules; and (3) break-up nodules with strongly resorbed quartz. These quartzites are restites from partial melting, involving felsic crustal rocks at the magma/wall rock contact. Restitic quartz re-crystallises at variable and generally high temperatures, leading to the formation of quartzites with different textures. Quartz grains contain five types of fluid inclusions distinguished on the basis of both fluid type and textural/phase relationships at room temperature. Type I are two-phase (liquid+vapour) CO 2-rich fluid inclusions. They are primary and subordinately pseudosecondary in origin and have undergone re-equilibration processes. Type II mono-phase/two-phase (vapour/liquid+vapour) CO 2-rich fluid inclusions are the most common and, based on their spatial distribution and shape, they can be divided into two subclasses: type IIa and type IIb. Type II inclusions are secondary or pseudosecondary and they are assumed to have formed after decrepitation of type I inclusions and cracking of the host quartz. Type III inclusions are mono-phase (vapour); they possibly contain CO 2 at very low density and surround the inner rims of quartz grains. Type IV two-phase silicate-melt inclusions contain glass±CO 2-rich fluid. Some of them are cogenetic with type II inclusions. Finally, type V two-phase (liquid+vapour) aqueous inclusions are both vapour-rich and liquid-rich aqueous inclusions. Microthermometric experiments were performed on both type I and II inclusions. Type I inclusions homogenise to liquid between 20 and 30.5 °C. Type IIa inclusions homogenise to vapour in the 24 to 30 °C range, with a maximum peak of frequency at 29 °C. Type IIb inclusions also homogenise to vapour between 14 and 25 °C. There appears to be no difference in homogenisation temperature distribution between the Strombolicchio and Paleostromboli II samples. The trapping pressures of the fluid inclusions have been obtained by combining the microthermometric data of the Strombolicchio and Paleostromboli II samples with the pressure–temperature–volume (i.e. density) characteristics for a pure CO 2 system. The data on the early inclusions (type I) suggest an important magma rest at a pressure of about 290 MPa (i.e. about 11-km depth). Type IIa CO 2 inclusions suggest that a second magma rest occurred at a pressure of about 100 MPa (i.e. about 3.5-km depth), whereas type IIb inclusions were trapped later at a shallower depth during the final magma upwelling. No pressure/depth differences seem to occur between the Strombolicchio and Paleostromboli II periods, indicating the same polybaric rests for the calc-alkaline magmas of Stromboli, despite their significantly different ages. This persistence in magma stagnation conditions from 200 to 60 ka suggests a similar plumbing system for the present-day Strombolian activity.  相似文献   

12.
This paper presents the measurements of a vertical structure of aerosol optical properties performed during the MACRON (Maritime Aerosol, Clouds and Radiation Observation in Norway) campaign, which took place in July and August 2007 at ALOMAR observatory on Andøya island (69.279°N, 16.009°E, elevation 380 m a.s.l.). The mean value of the aerosol optical thickness (AOT) at 500 nm during campaign was 0.12. Significant increase of the AOT above longtime mean value was observed on 7 and 8 August 2007 when the AOT exceeded 0.4 at 500 nm. Analyses of back trajectories show the aerosol transported from over Africa and Central Europe. The aerosol extinction coefficient obtained from the synergy of ceilometer and sun photometer observations reached 0.05–0.08 km?1 (at 1064 nm) in the dust layer. The single scattering albedo at the ALOMAR observatory decreased during the dust episode to 0.93–0.94, which indicates some absorptive aerosols in the lower PBL.  相似文献   

13.
  相似文献   

14.
W. Zhao  X. Chang  Z. Zhang 《水文研究》2009,23(10):1461-1470
As an important source of income in the region's economy, the jujube plantations are very common in arid north‐western China, and their planted areas continue to expand. In the central Heihe River Basin of arid north‐western China, Linze jujube (Zizyphus jujuba Mill. var. inermis (Bunge) Rehd.) plantations cover more than 10,000 ha, too. Water use by this species is expected to change or modify catchment hydrological process. To our knowledge, there is no information on the transpiration and canopy conductance of the jujube plantations in arid north‐western China. Therefore, Transpiration and canopy conductance were monitored in a 14‐year‐old Linze jujube orchard. The experiment was carried out in the central Heihe River Basin, near Pingchuan Town (Linze County, Gansu Province, China) during growing season of 2006, from May to the first ten days of October. Eight trees were used to measure sap flow using the heat‐pulse‐velocity method. The orchard was irrigated adequately during the study. Transpiration was estimated from the sap flow measurements. During the experiment, the transpiration rate of the orchard ranged from 0·32 to 1·40 mm per day. Canopy conductance was obtained from estimated daily transpiration and climatic variables measured on a half‐hour basis, and canopy conductance for water vapour transfer was between 1·20 to 82·57 mm s?1, with a mean of 11·86 ± 6·84 mm s?1 during the observation period. Air temperature and vapour‐pressure deficit exhibited a linear relationship with sap flow velocity and the relationship between these factors and canopy conductance could be represented by an exponential decay function. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

15.
We measured the fluxes of sensible and latent heat between a low‐land dipterocarp forest in Peninsular Malaysia and the atmosphere. No clear seasonal or interannual changes in latent heat flux were found from 2003 to 2005, while sensible heat flux sometimes fluctuated depending on the fluctuation of incoming radiation between wet and dry seasons. The evapotranspiration rates averaged for the period between 2003 and 2005 were 2·77 and 3·61 mm day?1 using eddy covariance data without and with an energy balance correction, respectively. Average precipitation was 4·74 mm day?1. Midday surface conductance decreased with an increasing atmospheric water vapour pressure deficit and thus restricted the excess water loss on sunny days in the dry season. However, the relationship between the surface conductance and vapour pressure deficit did not significantly decline with an increase in volumetric soil water content even during a period of extremely low rainfall. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

16.
Climate change analysis is essential, considering the numerous economic and ecological implications of this critical global environmental issue. This paper analyzes the spatial and temporal trends of mean air temperature in Romania’s most important agricultural area, the south and south-eastern region, between 1961 and 2009. In this respect, multiannual (the entire period) and multidecadal (1961–1990, 1971–2000, 1981–2009) trends were analyzed using the Mann–Kendall test and Sen’s slope method at 23 weather stations, annually, seasonally and for the growing season of the region’s main agricultural crops (maize and wheat). Multiannually, the results showed statistically significant temperature increases, on all temporal scales (maximum rate of 0.06 °C/year recorded in summer, equivalent to a net temperature rise of 2.82 °C), except for the autumn season (cooling without statistical significance). Multidecadally, the 1961–1990 period is marked by a general cooling, especially in autumn (maximum values of ?0.07 °C/year or over 2 °C net cooling). In the 1971–2000 and 1981–2009 periods, a general warming was observed (maximum in summer for both multidecades, when positive rates peaked at 0.09 °C/year, or 2.5–3 °C net warming), but the warming of the last three decades is the most prominent in terms of spatial average magnitude and trend significance. Upon analysis of the impact of climate warming on agricultural yields (maize) through linear regression, in the 1991–2000 decade, considered as case study, it was found that in 32 % of the total analyzed area there are evident relationships between the two variables (p value <0.05). In this case, a dependency of 33–50 % (40 %, on average) of maize to climate was found, and a sensitivity (loss) ranging between 0.9 and 1.5 t/ha/year (1.2 t/ha/year, on average) for a 1 °C temperature rise. At the same time, significant losses (of up to 1.7 t/ha/year) of maize for a 1 °C temperature rise were identified in 51 % of the area, but with little p value significance (between 0.05 and 0.1). It is however necessary to analyse the agro-climatic results cautiously, considering that only one decade of climate-agriculture relationship was studied. The results can be useful first and foremost for mitigating the climate change impact on agricultural systems, by prioritizing future adaptation strategies enforced by policy makers.  相似文献   

17.
Water repellency is a widespread property of Pinus pinaster and Eucalyptus globulus forest soils in NW Spain and is particularly severe during the summer dry conditions. The aim of this work was to compare actual water repellency at field‐moist samples with potential water repellency after drying at 25 and 105 °C in samples collected at different times of year under four forest soils. Also, we investigated whether drying at 25 or 105 °C led to repellency values comparable to the highest levels reached under field conditions in the summer with a view to developing an appropriate sampling protocol towards estimating the maximum possible water repellency of a given soil as a key to establishing its environmental effects. The actual and potential water repellency was determined by using the water drop penetration time (WDPT) and molarity of an ethanol drop (MED) tests. Clear seasonal patterns of water repellency were observed from the results for the four forest soils, peaking in the dry period and disappearing after prolonged wet periods. Water repellency lasts longer in sandy loam soils than in more finely textured soils, and also under eucalyptus than under pine forests. Drying soil samples at 25 or 105 °C increased water repellency, as measured with the WDPT method, in the four soils, but especially in the non‐repellent samples collected during the wet period. The increase was more marked in the sandy loam soils than in the more finely textured soils, and also after drying at 105 °C than at 25 °C. MED measurements exposed a common trait in the four soils; thus, the water repellency values obtained under field conditions in summer invariably exceeded those obtained after drying at 25 or 105 °C. In addition, the repellency values for dried samples collected in the wet period were never comparable to the maximum levels observed under field conditions in the summer. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
Soil erosion plays an important role in plant colonization of semi‐arid degraded areas. In this study, we aimed at deepening our knowledge of the mechanisms that control plant colonization on semi‐arid eroded slopes in east Spain by (i) determining topographic thresholds for plant colonization, (ii) identifying the soil properties limiting plant establishment and (iii) assessing whether colonizing species have specific plant traits to cope with these limitations. Slope angle and aspect were surrogates of erosion rate and water availability, respectively. Since soil erosion and water availability can limit plant establishment and both can interact in the landscape, we analysed variations in colonization success (vegetation cover and species number) with slope angle on 156 slopes, as a function of slope aspect. After determining slope angle thresholds for plant colonization, soil was sampled near the threshold values for soil analysis [nitrogen, phosphorous, calcium carbonate (CaCO3), water holding capacity]. Plant traits expressing the plant colonizing capacity were analysed both in the pool of species colonizing the steep slopes just below the threshold and in the pool of species inhabiting gentler slopes and absent from the slopes just below the threshold. Results show that the slope angle threshold for plant colonization decreased from north to south. For the vegetation cover, threshold values were 63°, 50°, 46°, 41° for the north, east, west and south slope aspect classes, respectively, and 65°, 53°, 49° and 45° for the species richness and the same aspect classes. No differences existed in soil properties at slope angle threshold values among slope aspects and between slope positions (just below and above the threshold) within slope aspect classes. This suggests that variations between slope aspect classes in the slope angle threshold result from differences in the colonizing capacity of plants which is controlled by water availability. Long‐distance dispersal and mucilage production were preferably associated with the pool of colonizing species. These results are discussed in the perspective of a more efficient ecological restoration of degraded semi‐arid ecosystems where soil erosion acts as an ecological filter for plant establishment. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

19.
Entrapped biogenic gas in peat can greatly affect peatland biogeochemical and hydrological processes by altering volumetric water content, peat buoyancy, and ‘saturated’ hydraulic conductivity, and by generating over‐pressure zones. These over‐pressure zones further affect hydraulic gradients which influence water and nutrient flow direction and rate. The dynamics of entrapped gas are of global interest because the loss of this gas to the atmosphere via ebullition (bubbling) is likely the dominant transport mechanism of methane (CH4) to the atmosphere from peatlands, which are the largest natural terrestrial source per annum of atmospheric CH4. We investigated the relationship between atmospheric pressure and temperature on volumetric gas content (VGC) and CH4 ebullition using a laboratory peat core incubation experiment. Peat cores were incubated at three temperatures (one core at 4 °C, three cores at 11 °C, and one core at 20 °C) in sealed PVC cylinders, instrumented to measure VGC, pore‐water CH4 concentrations, and ebullition (volume and CH4 concentrations). Ebullition events primarily occurred (71% of the time) during periods of falling atmospheric pressure. The duration of the drop in atmospheric pressure had a larger control on ebullition volume than the magnitude of the drop. VGC in the 20 °C core increased from the onset of the experiment and reached a fluctuating but time‐averaged constant level between experiment day 30 and 115. The change in VGC was low for the 11 °C cores for the initial period of the experiment but showed large increases when the growth chamber temperature increased to 20 °C due to a malfunction. The core maintained at 4 °C showed only a small increase in entrapped gas content throughout the experiment. The 20 °C core showed the largest increase in VGC. The increases in VGC occurred despite pore‐water concentrations of CH4 being below the equilibrium solubility level. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

20.
A modified multi-elevated-temperature post-IR infra-red stimulated luminescence (MET-pIRIR) protocol is proposed for dating young samples of Holocene age using K-feldspar. The protocol utilizes a five-step MET-pIRIR measurement with a moderate preheating of 200 °C for 60 s, and a narrow IR stimulation temperature increment of 30 °C (i.e., the five measurement temperatures are 50, 80, 110, 140 and 170 °C). Using this method, the residual doses of the MET-pIRIR signals are generally less than 1 Gy. Holocene aeolian samples from Northern China were tested using the 30°C-increment modified MET-pIRIR method. The results demonstrate that similar ages from 140 °C to 170 °C were obtained for our samples, which were consistent with the quartz optically stimulated luminescence (OSL) ages. Based on this observation, the measurement procedures are further simplified to a three-step pIRIR protocol. The first IR stimulation at elevated temperature (110 °C) is used to remove the fading affected signals. This is followed by two steps of IR stimulation at high temperatures (140 and 170 °C) for equivalent dose (De) measurement. Dating results consistent with the expected ages have been obtained at stimulation temperatures of 140 and 170 °C. It is suggested that the first IR stimulation can effectively remove the fading component. The three-step pIRIR method has minimized the experimental procedures, while keeping the age plateau test.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号