共查询到20条相似文献，搜索用时 31 毫秒
1.
India is prone to earthquake hazard; almost 65 % area falls in high to very high seismic zones, as per the seismic zoning map of the country. The Himalaya and the Indo-Gangetic plains are particularly vulnerable to high seismic hazard. Any major earthquake in Himalaya can cause severe destruction and multiple fatalities in urban centers located in the vicinity. Seismically induced ground motion amplification and soil liquefaction are the two main factors responsible for severe damage to the structures, especially, built on soft sedimentary environment. These are essentially governed by the size of earthquake, epicentral distance and geology of the area. Besides, lithology of the strata, i.e., sediment type, grain size and their distribution, thickness, lateral discontinuity and ground water depth, play an important role in determining the nature and degree of destruction. There has been significant advancement in our understanding and assessment of these two phenomena. However, data from past earthquakes provide valuable information which help in better estimation of ground motion amplification and soil liquefaction for evaluation of seismic risk in future and planning the mitigation strategies. In this paper, we present the case studies of past three large Indian earthquakes, i.e., 1803 Uttaranchal earthquake (Mw 7.5); 1934 Bihar–Nepal earthquake (Mw 8.1) and 2001 Bhuj earthquake (Mw 7.7) and discuss the role of soft sediments particularly, alluvial deposits in relation to the damage pattern due to amplified ground motions and soil liquefaction induced by the events. The results presented in the paper are mainly focused around the sites located on the river banks and experienced major destruction during these events. It is observed that the soft sedimentary sites located even far from earthquake epicenter, with low water saturation, experienced high ground motion amplification; while the sites with high saturation level have undergone soil liquefaction. We also discuss the need of intensifying studies related to ground motion amplification and soil liquefaction in India as these are the important inputs for detailed seismic hazard estimation. 相似文献
2.
Generally the seismic hazard of an area of interest is considered independent of time. However, its seismic risk or vulnerability, respectively, increases with the population and developing state of economy of the area. Therefore, many areas of moderate seismic hazard gain increasing importance with respect to seismic hazard and risk analysis. However, these areas mostly have a weak earthquake database, i.e., they are characterised by relative low seismicity and uncertain information concerning historical earthquakes. In a case study for Eastern Thuringia (Germany), acting as example for similar places in the world, seismic hazard is estimated using the probabilistic approach. Because of the lack of earthquakes occurring in the recent past, mainly historical earthquakes have to be used. But for these the actual earthquake sources or active faults, needed for the analysis, are imprecisely known. Therefore, the earthquake locations are represented by areal sources, a common practice. The definition of these sources is performed carefully, because their geometrical shape and size (apart from the earthquake occurrence model) influence the results significantly. Using analysis tools such as density maps of earthquake epicentres, seismic strain and energy release support this. Oversizing of areal sources leads to underestimation of seismic hazard and should therefore be avoided. Large location errors of historical earthquakes on the other hand are represented by several alternative areal sources with final superimposition of the different results. In a very similar way information known from macroseismic observations interpreted as source rather than as site effects are taken into account in order to achieve a seismic hazard assessment as realistic as possible. In very local cases the meaning of source effects exceeds those of site effects very likely. The influence of attenuation parameter variations on the result of estimated local seismic hazard is relatively low. Generally, the results obtained by the seismic hazard assessment coincide well with macroseismic observations from the thoroughly investigated largest earthquake in the region. 相似文献
3.
Ivan G. Wong 《Natural Hazards》2014,72(3):1299-1309
The occurrence of several recent “extreme” earthquakes with their significant loss of life and the apparent failure to have been prepared for such disasters has raised the question of whether such events are accounted for in modern seismic hazard analyses. In light of the great 2011 Tohoku-Oki earthquake, were the questions of “how big, how bad, and how often” addressed in probabilistic seismic hazard analyses (PSHA) in Japan, one of the most earthquake-prone but most earthquake-prepared countries in the world? The guidance on how to properly perform PSHAs exists but may not be followed for a whole range of reasons, not all technical. One of the major emphases of these guidelines is that it must be recognized that there are significant uncertainties in our knowledge of earthquake processes and these uncertainties need to be fully incorporated into PSHAs. If such uncertainties are properly accounted for in PSHA, extreme events can be accounted for more often than not. This is not to say that no surprises will occur. That is the nature of trying to characterize a natural process such as earthquake generation whose properties also have random (aleatory) uncertainties. It must be stressed that no PSHA is ever final because new information and data need to be continuously monitored and addressed, often requiring an updated PSHA. 相似文献
4.
This study presents the future seismic hazard map of Coimbatore city, India, by considering rupture phenomenon. Seismotectonic
map for Coimbatore has been generated using past earthquakes and seismic sources within 300 km radius around the city. The
region experienced a largest earthquake of moment magnitude 6.3 in 1900. Available earthquakes are divided into two categories:
one includes events having moment magnitude of 5.0 and above, i.e., damaging earthquakes in the region and the other includes
the remaining, i.e., minor earthquakes. Subsurface rupture character of the region has been established by considering the
damaging earthquakes and total length of seismic source. Magnitudes of each source are estimated by assuming the subsurface
rupture length in terms of percentage of total length of sources and matched with reported earthquake. Estimated magnitudes
match well with the reported earthquakes for a RLD of 5.2% of the total length of source. Zone of influence circles is also
marked in the seismotectonic map by considering subsurface rupture length of fault associated with these earthquakes. As earthquakes
relive strain energy that builds up on faults, it is assumed that all the earthquakes close to damaging earthquake have released
the entire strain energy and it would take some time for the rebuilding of strain energy to cause a similar earthquake in
the same location/fault. Area free from influence circles has potential for future earthquake, if there is seismogenic source
and minor earthquake in the last 20 years. Based on this rupture phenomenon, eight probable locations have been identified
and these locations might have the potential for the future earthquakes. Characteristic earthquake moment magnitude (M
w
) of 6.4 is estimated for the seismic study area considering seismic sources close to probable zones and 15% increased regional
rupture character. The city is divided into several grid points at spacing of 0.01° and the peak ground acceleration (PGA)
due to each probable earthquake is calculated at every grid point in city by using the regional attenuation model. The maximum
of all these eight PGAs is taken for each grid point and the final PGA map is arrived. This map is compared to the PGA map
developed based on the conventional deterministic seismic hazard analysis (DSHA) approach. The probable future rupture earthquakes
gave less PGA than that of DSHA approach. The occurrence of any earthquake may be expected in near future in these eight zones,
as these eight places have been experiencing minor earthquakes and are located in well-defined seismogenic sources. 相似文献
5.
A first generation of probabilistic seismic hazard maps of the Italian country are presented. They are based on seismogenic zoning deriving from a kinematic model of the structural tectonic units and on an earthquake catalogue with the foreshock and aftershock events filtered out. The following ground motion parameters have been investigated and mapped using attenuation equations based on strong-motion recordings of Italian earthquakes: peak ground acceleration and velocity; Arias intensity; strong motion duration; and the pseudovelocity and pseudoacceleration spectral values at 14 fixed frequencies both for the vertical and the largest horizontal component. A Poissonian model of earthquake occurrence is assumed as a default and the hazard maps are presented in terms of ground motion values expected to be exceeded at a 10% probability level in 50 years (return period 475 years) according to the requirement of Eurocode 8 for the seismic classification of national territories, as well as in terms of exceedance probabilities of selected ground motion values. Finally, as a tentative study, the use of hybrid methods (implementing both seismogenic zones and structures), renewal processes (including earthquake forecasting) and the influence of site effects (as the basis for the planning of earthquake scenarios) were explored. 相似文献
6.
7.
Testing a new hybrid approach to seismic hazard assessment: an application to the Calabrian Arc (Southern Italy) 总被引：1，自引：1，他引：0
We tested a new hybrid method for the evaluation of seismic hazard. A recently proposed fault segmentation and earthquake recurrence model of peninsular Italy suggests that the interval for which the local historical catalogue is complete is shorter than the mean recurrence time of individual large faults (1000 years), or at the most comparable. These new findings violate the fundamental assumption of historical probabilistic seismic hazard methods that the historical record is representative of the activity of all the seismogenic sources. The hybrid method we propose uses time-dependent modelling of the major earthquakes and catalogue-based historical probabilistic estimates for all minor events. We assume that the largest earthquakes are characteristic for individual discrete fault segments, model their probability of occurrence by a renewal process and compute the shaking associated with each of them with a simplified procedure. Then we calculate the probability of exceeding a given threshold of peak ground acceleration for specific sites as the aggregate probability of occurrence of large characteristic earthquakes and minor shocks. We apply the method to the Calabrian Arc (Southern Italy) performing the calculations for five major towns. The exposure to seismic hazard of Reggio Calabria, Catanzaro and Vibo Valentia, which locate close to recently activated large faults, decreases with respect to traditional time-independent estimates. On the contrary, an increase of seismic hazard is obtained for Castrovillari, which locates in an area where large faults displaying Holocene activity have been recently recognized but no significant earthquake is reported in the historical catalogue. Cosenza has the highest probability to experience a significant peak ground acceleration with both the new hybrid and the traditional approaches. We wish to stress that the present results should be interpreted only in terms of the differences between the new hybrid and the traditional approaches, not for their absolute values, and that they are not intended to be used for updating or modifying the current national seismic zonation. 相似文献
8.
Effect of Aftershocks on Earthquake Hazard Estimation: An Example from the North Anatolian Fault Zone 总被引：2，自引：0，他引：2
In order to investigate the effect of aftershocks on earthquake hazard estimation, earthquake hazard parameters (m, b and Mmax) have been estimated by the maximum likelihood method from the main shocks catalogue and the raw earthquakes catalogue for the North Anatolian Fault Zone (NAFZ). The main shocks catalogue has been compiled from the raw earthquake catalogue by eliminating the aftershocks using the window method. The raw earthquake catalogue consisted of instrumentally detected earthquakes between 1900 and 1992, and historical earthquakes that occurred between 1000–1900. For the events of the mainshock catalogue the Poisson process is valid and for the raw earthquake catalogue it does not fit. The paper demonstrates differences in the hazard outputs if on one hand the main catalogues and on the other hand the raw catalogue is used. The maximum likelihood method which allows the use of the mixed earthquake catalogue containing incomplete (historical) and complete (instrumental) earthquake data is used to determine the earthquake hazard parameters. The maximum regional magnitude (Mmax, the seismic activity rate (m), the mean return period (R) and the b value of the magnitude-frequency relation have been estimated for the 24°–31° E, 31°–41° E, 41°–45° E sections of the North Anatolian Fault Zone from the raw earthquake catalogue and the main shocks catalogue. Our results indicate that inclusion of aftershocks changes the b value and the seismic activity rate m depending on the proportion of aftershocks in a region while it does not significantly effect the value of the maximum regional magnitude since it is related to the maximum observed magnitude. These changes in the earthquake hazard parameters caused the return periods to be over- and underestimated for smaller and larger events, respectively. 相似文献
9.
A general overview of some of the problems involved in earthquake catalogue handling is given as part of the works carried out into the ESC/SC8-TERESA project related with the seismic hazard assessment in two selected test areas: Sannio-Matese in Italy and the northern Rhine region (BGN). Furthermore, the necessary input data to be used in the calculation of seismic hazard has been obtained, including earthquake source zones and their seismic hazard parameters.The importance is pointed out of detailed analysis of seismic catalogues, mainly in relation to the use of aftershock information, the historical records of the region, and the possible temporal and spatial variation of seismicity, which could have an important influence on short-term hazard assessment. 相似文献
10.
Nuclear power plants are designed to prevent the hazardous effects of the earthquakes and any external events to keep the safety of the plant. Ninety-one shallow seismic refraction profiles were performed to determine shear wave velocity of the engineering layers at the site of El Dabaa area that is situated to the northern coastline of Egypt for seismic hazard microzonation evaluation according to hazard index values. A microzonation is a procedure of delineating an area into individual zones having different ranks of numerous seismic hazards. This will aid in classifying areas of high seismic risk which is vigorous for industrial design of nuclear structures. The site response analysis requires the characterization of subsurface materials considering local subsurface profiles of the site. Site classification of the area under investigation was undertaken using P- and S-waves and available borehole data. The studied nuclear power plant site has been characterized as per NEHRP site classification using an average velocity of transverse wave (V s 30 ) of depth 30 m which acquired from seismic survey. This site was categorized into two site classes: the major one is “site class B,” and the minor one is “site class A.” The attenuation coefficient, the damping ratio and the liquefaction potential are geotechnical parameters which were derived from P- and S-waves, and have their major effects on the seismic hazard contribution. 1D ground response analysis was carried out in the places of seismic profiles inside the site for estimating the amount of ground quaking using peak ground acceleration (PGA), site amplification, predominant frequency and spectral accelerations on the surface of ground by the DEEPSOIL software package. Seven factors (criteria) deliberated to assess the earthquake hazard index map are: (1) the peak ground acceleration at the bedrock, (2) the amplification of the site, (3) the liquefaction potential, (4) the main frequency of the earthquake signal, (5) the average V s of the first 30 m from the ground surface, (6) the depth to the groundwater and (7) the depth to the bedrock. These features were exemplified in normalized maps after uniting them to 0–1 scores according to some criteria by the minimum and maximum values as linear scaling points. Multi-criteria evaluation is an application of multi-criteria decision analysis theory that used for developing a seismic hazard index map for a nuclear power plant site at El Dabaa area in ArcGIS 10.1 software. Two models of decision making were used in this work for seismic hazard microzonation. The analytic hierarchy process model was applied to conduct the relative weights of the criteria by pairwise comparison using Expert Choice Software. An earthquake hazard index map was combined using Weighted Linear Combination model of the raster weighted overlay tool of ArcGIS 10.1. The results indicated that most of the study site of the nuclear power plant is a region of low to moderate hazard; its values are ranging between 0.2 and 0.4. 相似文献
11.
In this paper we apply a probabilistic methodology to map specific seismic hazard induced by the Vrancea Seismogenic Zone, which represents the uttermost earthquake danger to Romania as well as its surroundings. The procedure is especially suitable for the estimation of seismic hazard at an individual site, and seismic hazard maps can be created by applying it repeatedly to grid points covering larger areas. It allows the use of earthquake catalogues with incompletely reported historical and complete instrumental parts. When applying themethodology, special attention was given to the effect of hypocentral depth and the variation of attenuation according to azimuth. Hazard maps specifying a 10% chance of exceedance of the given peak ground acceleration value for an exposure time of 50 years were prepared for three different characteristic depths of earthquakes in the Vrancea area. These maps represent a new realistic contribution to the mitigation of the earthquake risk caused by the Vrancea Seismogenic Zone in terms of: (1) input data (consistent, reliable, and the most complete earthquake catalogue), (2) appropriate and specific attenuation relationships (considering both azimuthal and depth effects); and (3) a new and versatile methodology. 相似文献
12.
Within the framework of the performance based earthquake engineering, site specific earthquake spectra for Van province has been obtained. It is noteworthy that, in probabilistic seismic hazard assessment, as a first stage data from geological studies and records from the instrumental period were compiled to make a seismic source characterization for the study region. The probabilistic seismic hazard curves were developed based on selected appropriate attenuation relationships, at rock sites, with a probability of exceedance 2, 10 and 50% in 50 yrs period. The obtained results are compared with the spectral responses proposed for seismic evaluation and retrofit of building structure in Turkish Earthquake Code (2007), section 7. The acceleration response spectrums obtained from probabilistic seismic hazard analysis are matched to adjust earthquake accelerograms recorded during the 2011 Van earthquakes by using SeismoMatch v2.0 software. The aim of this procedure is to obtain a set of reasonable earthquake input motions for the seismic evaluation of existing buildings. 相似文献
13.
Areas of low strain rate are typically characterized by low to moderate seismicity. The earthquake catalogs for these regions
do not usually include large earthquakes because of their long recurrence periods. In cases where the recurrence period of
large earthquakes is much longer than the catalog time span, probabilistic seismic hazard is underestimated. The information
provided by geological and paleo-seismological studies can potentially improve seismic hazard estimation through renewal models,
which assume characteristic earthquakes. In this work, we compare the differences produced when active faults in the northwestern
margin of the València trough are introduced in hazard analysis. The differences between the models demonstrate that the introduction
of faults in zones characterized by low seismic activity can give rise to significant changes in the hazard values and location.
The earthquake and fault seismic parameters (recurrence interval, segmentation or fault length that controls the maximum magnitude
earthquake and time elapsed since the last event or Te) were studied to ascertain their effect on the final hazard results. The most critical parameter is the recurrence interval,
where shorter recurrences produce higher hazard values. The next most important parameter is the fault segmentation. Higher
hazard values are obtained when the fault has segments capable of producing big earthquakes. Finally, the least critical parameter
is the time elapsed since the last event (Te), when longer Te produces higher hazard values. 相似文献
14.
Magnitude conversion problem for the Turkish earthquake data 总被引：1，自引：0，他引：1
Earthquake catalogues which form the main input in seismic hazard analysis generally report earthquake magnitudes in different
scales. Magnitudes reported in different scales have to be converted to a common scale while compiling a seismic data base
to be utilized in seismic hazard analysis. This study aims at developing empirical relationships to convert earthquake magnitudes
reported in different scales, namely, surface wave magnitude, M
S, local magnitude, M
L, body wave magnitude, m
b and duration magnitude, M
d, to the moment magnitude (M
w). For this purpose, an earthquake data catalogue is compiled from domestic and international data bases for the earthquakes
occurred in Turkey. The earthquake reporting differences of various data sources are assessed. Conversion relationships are
established between the same earthquake magnitude scale of different data sources and different earthquake magnitude scales.
Appropriate statistical methods are employed iteratively, considering the random errors both in the independent and dependent
variables. The results are found to be sensitive to the choice of the analysis methods. 相似文献
15.
16.
Intermediate-depth earthquakes in the Vrancea region occur in response to stress generation due to descending lithosphere
beneath the southeastern Carpathians. In this article, tectonic stress and seismicity are analyzed in the region on the basis
of a vast body of observations. We show a correlation between the location of intermediate-depth earthquakes and the predicted
localization of maximum shear stress in the lithosphere. A probabilistic seismic hazard assessment (PSHA) for the region is
presented in terms of various ground motion parameters on the utilization of Fourier amplitude spectra used in engineering
practice and risk assessment (peak ground acceleration, response spectra amplitude, and seismic intensity). We review the
PSHA carried out in the region, and present new PSHA results for the eastern and southern parts of Romania. Our seismic hazard
assessment is based on the information about the features of earthquake ground motion excitation, seismic wave propagation
(attenuation), and site effect in the region. Spectral models and characteristics of site-response on earthquake ground motions
are obtained from the regional ground motion data including several hundred records of small and large earthquakes. Results
of the probabilistic seismic hazard assessment are consistent with the features of observed earthquake effects in the southeastern
Carpathians and show that geological factors play an important part in the distribution of the earthquake ground motion parameters. 相似文献
17.
18.
The assessment of seismic hazard parameters is important in the seismically active regions. A straightforward approach is considered for the statistical estimation of the maximum values of earthquake hazard parameters. The Bayesian estimator is suggested and emphasis is given to the evaluation of the maximum possible Mmax (regional) magnitude in a future time interval T. This approach allows the uncertainty of earthquake magnitude to be accounted for. Seismic hazard parameters like the -value which is the slope of the magnitude-frequency law (where, b = loge) and the intensity (rate) of seismic activity and their uncertainties are also estimated. The quantiles of functions of distributions of true and apparent magnitude on a given time interval [0, T] are evaluated, as well. Two main assumptions are adopted for the method:(1) earthquake occurrence is Poissonian and(2) the magnitude-frequency law is of Gutenberg-Richter type with a cutoff maximum value of magnitude. It is needless to say the seismic catalog used must have a large number of events. This requirement leads to the estimation of the parameters referred to some of the most seismically active regions of the world, e.g., Chile, Peru-Equador-South Colombia,Central America and Mexico, which belong to the east part of the circum-Pacific belt. 相似文献
19.
作为地震灾害评估的理论基础,地震动力学主要研究与地震活动有关的断裂机制、破裂过程、震源辐射和由此而引起的地震波的传播及地面运动规律。对地震力学、震源辐射和能量释放等经典理论问题进行了系统研究。在此基础上,应用最新的定量地震学研究方法,以逻辑树的形式综合地震、地质和大地测量资料,提供了不同构造环境和断裂机制条件下地震灾害评估的概率分析和确定性分析实例。用于震源分析的典型构造类型包括板内地壳震源层、地壳活动断层及其速率、板块俯冲界面和俯冲板片。由于输入模型中不确定因素的存在,如输入参数的随机性和科学分析方法本身的不确定性,对分析结果的不确定性需审慎对待。通常对不同的模型或参量,包括地面衰减模型,进行加权平均可较为合理地减小结果的偏差：概率分析和确定性分析方法的结合亦为可取之有效途径。 相似文献
20.
The Himalayas has experienced varying rates of earthquake occurrence in the past in its seismo-tectonically distinguished segments which may be attributed to different physical processes of accumulation of stress and its release, and due diligence is required for its inclusion for working out the seismic hazard. The present paper intends to revisit the various earthquake occurrence models applied to Himalayas and examines it in the light of recent damaging earthquakes in Himalayan belt. Due to discordant seismicity of Himalayas, three types of regions have been considered to estimate larger return period events. The regions selected are (1) the North-West Himalayan Fold and Thrust Belt which is seismically very active, (2) the Garhwal Himalaya which has never experienced large earthquake although sufficient stress exists and (3) the Nepal region which is very seismically active region due to unlocked rupture and frequently experienced large earthquake events. The seismicity parameters have been revisited using two earthquake recurrence models namely constant seismicity and constant moment release. For constant moment release model, the strain rates have been derived from global strain rate model and are converted into seismic moment of earthquake events considering the geometry of the finite source and the rates being consumed fully by the contemporary seismicity. Probability of earthquake occurrence with time has been estimated for each region using both models and compared assuming Poissonian distribution. The results show that seismicity for North-West region is observed to be relatively less when estimated using constant seismicity model which implies that either the occupied accumulated stress is not being unconfined in the form of earthquakes or the compiled earthquake catalogue is insufficient. Similar trend has been observed for seismic gap area but with lesser difference reported from both methods. However, for the Nepal region, the estimated seismicity by the two methods has been found to be relatively less when estimated using constant moment release model which implies that in the Nepal region, accumulated strain is releasing in the form of large earthquake occurrence event. The partial release in second event of May 2015 of similar size shows that the physical process is trying to release the energy with large earthquake event. If it would have been in other regions like that of seismic gap region, the fault may not have released the energy and may be inviting even bigger event in future. It is, therefore, necessary to look into the seismicity from strain rates also for its due interpretation in terms of predicting the seismic hazard in various segments of Himalayas. 相似文献