We employ a novel fluid–particle model to study the shearing behavior of granular soils under different saturation levels, ranging from the dry material via the capillary bridge regime to higher saturation levels with percolating clusters. The full complexity of possible liquid morphologies Scheel et al. (Nat Mater 7(3):189–193, 2008. doi:10.1038/nmat2117) is taken into account, implying the formation of isolated arbitrary-sized liquid clusters with individual Laplace pressures that evolve by liquid exchange via films on the grain surface Melnikov et al. (Phys Rev E 92(022):206, 2015. doi:10.1103/PhysRevE.92.022206). Liquid clusters can grow in size, shrink, merge and split, depending on local conditions, changes of accessible liquid and the pore space morphology determined by the granular phase. This phase is represented by a discrete particle model based on contact dynamics Brendel et al. (Contact dynamics for beginners. Wiley-VCH, Weinheim, 2005. doi:10.1002/352760362X.ch14), where capillary forces exerted from a liquid phase add to the motion of spherical particles. We study the macroscopic response of the system due to an external compression force at various liquid contents with the help of triaxial shear tests. Additionally, the change in liquid cluster distributions during the compression due to the deformation of the pore space is evaluated close to the critical load. 相似文献
Extensive laboratory model tests have been carried out on a strip footing resting over dry sand bed subjected to eccentrically inclined load to determine the ultimate bearing capacity (Patra et al. in Int J Geotech Eng 6(3):343–352, 2012a. https://doi.org/10.3328/IJGE.2012.06.03.343-352, Int J Geotech Eng 6(4):507–514, b. https://doi.org/10.3328/IJGE.2012.06.04.507-514). Similarly, lower bound calculations based on finite element method were performed to compute the bearing capacity of a strip footing subjected to an eccentric and inclined load lying over a cohesionless soil with varying embedment depth and relative density (Krabbenhoft et al. in Int J Geomech ASCE, 2014. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000332). The load may be applied in two ways namely, towards the center line and away from the center line of the footing. Based on the results (both experimental and numerical analyses), a neural network model is developed to predict the reduction factor that will be used in computing the ultimate bearing capacity of an eccentrically inclined loaded strip footing. This reduction factor (RF) is the ratio of the ultimate bearing capacity of the footing subjected to an eccentrically inclined load to the ultimate bearing capacity of the footing subjected to a centric vertical load. A thorough sensitivity analysis is carried out to evaluate the parameters affecting the reduction factor. Based on the weights of the developed neural network model, a neural interpretation diagram is developed to find out whether the input parameters have direct or inverse effect on the output. A prediction model equation is framed with the trained weights of the neural network as the model parameters. The predictions from ANN, and those from other approaches, are compared with the results computed from both experimentation and FEM analyses. The ANN model results are found to be more accurate and well matched with other results. 相似文献
Accurate laboratory measurement of geo-engineering properties of intact rock including uniaxial compressive strength (UCS) and modulus of elasticity (E) involves high costs and a substantial amount of time. For this reason, it is of great necessity to develop some relationships and models for estimating these parameters in rock engineering. The present study was conducted to forecast UCS and E in the sedimentary rocks using artificial neural networks (ANNs) and multivariable regression analysis (MLR). For this purpose, a total of 196 rock samples from four rock types (i.e., sandstone, conglomerate, limestone, and marl) were cored and subjected to comprehensive laboratory tests. To develop the predictive models, physical properties of studied rocks such as P wave velocity (Vp), dry density (γd), porosity, and water absorption (Ab) were considered as model inputs, while UCS and E were the output parameters. We evaluated the performance of MLR and ANN models by calculating correlation coefficient (R), mean absolute error (MAE), and root-mean-square error (RMSE) indices. The comparison of the obtained results revealed that ANN outperforms MLR when predicting the UCS and E. 相似文献
This book review takes the authors to task for omitting numerous references when they wrote this first comprehensive work on thallium. Among the omissions noted are; 1) the extreme toxicity of thallium; 2) the occurrence of thallium in various minerals:
REVIEW OF THALLIUM, ITS GEOCHEMISTRY, MINERALOGY, PRINCIPAL GENETIC TYPES OF DEPOSITS, AND GEOCHEMICAL PROVINCES BY V.V. IVANOV, V.YU. VOLGIN, A.A. KRASNOV AND N.V. LIZUNOV
Rock burst is a complex dynamic process can lead to casualties, to failure and deformation of the supporting structures, and to damage of the equipment on site; hence, its prediction is of great importance in underground construction. We present a novel empirical method to predict rock burst based on the theory of logistic regression classifiers. An extensive database collected from the literature, which includes observations about rock burst occurrence (or not) in underground excavations in projects from all over the world, is used to train and validate the model. The proposed approach allows us to compute new class separation lines (or planes) to estimate the probability of rock burst, using different combinations of five possible input parameters—tunnel depth, H; maximum tangential stress, MTS; elastic energy index, Wet; uniaxial compressive strength of rock, UCS; uniaxial tensile strength of rock, UTS—among which it was found that the preferable model could be developed in H–Wet–UCS space. The proposed model is validated with goodness-of-fit tests and nine-fold cross-validation; results show that its predictive capability compares well with previously proposed empirical methods and confirm that, as expected, the probability of rock burst increases with excavation depth, and that both Wet and UCS have a similarly significant influence on rock burst occurrence. Finally, expressions are proposed for identification of conditions associated with several reference values of rock burst probability, which can be employed in preliminary risk analyses. 相似文献
The results of observations with the MASTER-SHOK robotic wide-field optical cameras onboard the Lomonosov Space Observatory carried out in 2016 are presented. In all, the automated transient detection system transmitted 22 181 images of moving objects with signal-to-noise ratios greater than 5 to the Earth. Approximately 84% of these images are identified with well-known artificial Earth satellites (including repeated images of the same satellite) and fragments of such satellites (space debris), according to databases of known satellites. The remaining 16% of the images are relate to uncatalogued objects. This first experience in optical space-based monitoring of near-Earth space demonstrates the high efficiency and great potential of using large-aperture cameras in space, based on the software and technology of the MASTER robotic optical complexes (the Mobile Astronomical System of TElescope- Robots (MASTER) global network of robotic telescopes of Lomonosov Moscow State University). 相似文献
As part of our broader research agenda on the psychology of risk communication and of risk management, we use a socio-ecological approach, inspired by Bronfenbrenner (Am Psychol 32:513–531, 1977. https://doi.org/10.1037/0003-066x.32.7.513), to better understand how Canadians perceive and prepare for risks originating from natural disasters. In this article, we present three empirical mixed-method studies as layers of analysis—a national survey, a social-spatial multi-level analysis, and a series of qualitative interviews—to bring a better understanding of how to engage Canadians in disaster preparedness and risk management. From our data, we examined how individuals perceived and understood natural disaster risks in Canada and how these fit in their social and life contexts. Given the increasingly diverse Canadian population, we used a cultural lens to contrast immigrants to Canadian-born individuals. After introducing the conceptual background and presenting our empirical studies, we conclude with a discussion on the implications for risk communication and management for natural disasters. Our findings suggest that Canadians could benefit from culturally targeted disaster risk reduction strategies that engage individuals–communities–government at all levels and are more attuned to the realities and specificities of life stressors.
Australia’s Integrated Marine Observing System (IMOS, imos.org.au) is research infrastructure to establish an enduring observing program for Australian oceanic waters and shelf seas. The observations cover physical, biological, and chemical variables to address themes of multi-decadal ocean change, climate variability and weather extremes, boundary currents and inter-basin flows, continental shelf processes and ecosystem responses.IMOS observations are collected by national facilities based on various platform types and operated by partner institutions around the country. In this paper we describe the infrastructure and workflows developed to manage and distribute the data to the public. We highlight the existing standards and open-source software we have adopted, and the contributions we have made. To demonstrate the value of this infrastructure we provide some illustrations of use and uptake.All IMOS data are freely and openly available to the public via the Ocean Portal (https://imos.aodn.org.au). All IMOS-developed software is open-source and accessible at https://github.com/aodn. 相似文献
The available information on the graptolite faunas of the Chu-Illyskiye Mountains is synthesized and comparisons made with other faunas of Kazakhstan, Europe, North America, and China. Comparison with Bet-Pak-la, 400 km NW of the Chu-Iliyskiye, shows almost no species common to contemporaneous units, a discrepancy attributed to facies differences. Correlation with the English standard is good although many details of zonal equation are arbitrary. Fifty species, of which 17 are new, are described and illustrated. Twenty-two are typically European, five North American, two Russian, and one Chinese; three are not formally named. Correlation between the graptolite zones of the Chu-Iliyskiye Mountains and the English standard zones is as follows:
ORDOVICIAN GRAPTOLITES OF THE CHU-ILIYSKIYE MOUNTAINS
SPIDR (Space Physics Interactive Data Resource) is a standard data source for solar-terrestrial physics, functioning within
the framework of the ICSU World Data Centers. It is a distributed database and application server network, built to select,
visualize and model historical space weather data distributed across the Internet. SPIDR can work as a fully-functional web-application
(portal) or as a grid of web-services, providing functions for other applications to access its data holdings.
Reductive precipitation of hexavalent chromium (Cr(VI)) with magnetite is a well-known Cr(VI) remediation method to improve water quality. The rapid (<a few hr) reduction of soluble Cr(VI) to insoluble Cr(III) species by Fe(II) in magnetite has been the primary focus of the Cr(VI) removal process in the past. However, the contribution of simultaneous Cr(VI) adsorption processes in aged magnetite has been largely ignored, leaving uncertainties in evaluating the application of in situ Cr remediation technologies for aqueous systems. In this study, effects of common groundwater ions (i.e., nitrate and sulfate) on Cr(VI) sorption to magnetite were investigated using batch geochemical experiments in conjunction with X-ray absorption spectroscopy.
Results
In both nitrate and sulfate electrolytes, batch sorption experiments showed that Cr(VI) sorption decreases with increasing pH from 4 to 8. In this pH range, Cr(VI) sorption decreased with increasing ionic strength of sulfate from 0.01 to 0.1 M whereas nitrate concentrations did not alter the Cr(VI) sorption behavior. This indicates the background electrolyte specific Cr(VI) sorption process in magnetite. Under the same ionic strength, Cr(VI) removal in sulfate containing solutions was greater than that in nitrate solutions. This is because the oxidation of Fe(II) by nitrate is more thermodynamically favorable than by sulfate, leaving less reduction capacity of magnetite to reduce Cr(VI) in the nitrate media. X-ray absorption spectroscopy analysis supports the macroscopic evidence that more than 75 % of total Cr on the magnetite surfaces was adsorbed Cr(VI) species after 48 h.
Conclusion
This experimental geochemical study showed that the adsorption process of Cr(VI) anions was as important as the reductive precipitation of Cr(III) in describing the removal of Cr(VI) by magnetite, and these interfacial adsorption processes could be impacted by common groundwater ions like sulfate and nitrate. The results of this study highlight new information about the large quantity of adsorbed Cr(VI) surface complexes at the magnetite-water interface. It has implications for predicting the long-term stability of Cr at the magnetite-water interface.
For understanding the Mesozoic tectonics of Yanshan （燕山 ） belt, the authors took geological mapping in the belt. A large-scale thrust structure was identified in Yonganpu （永安堡） area. in the western part of Suizhong （绥中 ） County, Liaoning （辽宁 ） Province during our recent mapping in the Yanshan belt. The hanging wall of the thrust was composed of Archean gneiss and the overlying Early Cretaceous Zhangjiakou （张家口 ） Formation; meanwhile, the strongly ductile deformed volcanic rocks of Zhangjiakou Formation comprised the footwall in Yong＇anpu tectonic window. This discovery indicates the existence of strongly contractional deformation in the Yanshan belt after the eruption of Early Cretaceous Zhangjiakou volcanic rocks. On the basis of mapping and research, it is concluded that the published official geological maps have failed to identify the major structural features of the Yanshan belt. 相似文献
Impacts of climate change have been observed in natural systems and are expected to intensify in future decades (IPCC in Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change IPPC, Geneva, 2014). Governments are seeking to establish adaptive measures for minimizing the effects of climate change on vulnerable citizen groups, economic sectors and critical infrastructure (Adger et al. in Global Environ Change 15(2):77–86, 2005. doi:10.1016/j.gloenvcha.2004.12.005; Smit and Wandel in Global Environ Change 16(3):282–292, 2006. doi:10.1016/j.gloenvcha.2006.03.008). Coastal areas are particularly vulnerable to changing conditions due to rising sea levels and storm event intensification that produce new flood exposures (Richards and Daigle in Government of Prince Edward Island, Halifax, Nova Scotia, 2011http://www.gov.pe.ca/photos/original/ccscenarios.pdf). However, communities oftentimes lack access to locally-relevant climate change information that can support adaptation planning. This research introduces the use of a Geoweb tool for supporting local climate change adaptation efforts in coastal Canadian communities. The Geoweb tool (called “AdaptNS”) is a web-based visualization tool that displays interactive flood exposure maps generated using local climate change projections of sea level rise and storm surge impacts between the years 2000 and 2100. AdaptNS includes participatory features that allow users to identify and share specific locations to protect against present and future coastal flood events. By soliciting feedback from community members, AdaptNS is shown to support local adaptation through the provision of flood exposure visuals, as a platform for identifying adaptation priorities, and as an avenue to communicate local risks to external entities that could facilitate local adaptation initiatives (e.g. upper levels of government). Future Geoweb research directions include improving the visualization of climate change projection uncertainties, the expansion of informational and participation capabilities, and understanding the potential for long-term adoption of Geoweb tools in adaptation decision-making. 相似文献
Although the sources of the ore metals remain problematic in most Iron-oxide Cu and Au (IOCG) deposits, external sulphur, either from surficial basinal brines and seawater (e.g., Central Andean and Carajás deposits) or from formation water and metamorphic fluids (e.g., the Cloncurry deposits), or introduced by magmatic assimilation of metasedimentary units (e.g., Phalaborwa), has been documented in many major Cu-rich IOCG centres. However, only the evaporite-sourced fluids yield diagnostically high δ34S values (i.e., > 10‰), while sedimentary formation water or metamorphic fluids commonly have lower values and are less clearly distinguishable from magmatic fluids, as in the Cloncurry deposits in which the involvement of external fluids is revealed by other evidence, such as noble gas isotopes. On the basis of these arguments, IOCG deposits could be redefined as a clan of Cu (AuAgU) deposits containing abundant hypogene iron oxide (magnetite and/or hematite), in which externally-derived sulphur probably plays an important role for the Cu (AuAgU) mineralization. In this definition, all “Kiruna-type” magnetite deposits, hydrothermal iron deposits (e.g., skarn Fe deposits) and magnetite-rich porphyry CuAu and skarn CuAu deposits are excluded. Two subtypes of IOCG deposits are recognized on the basis of the predominant iron oxide directly associated with the Cu (Au) mineralization, whether magnetite or hematite. Neither magnetite- nor hematite-rich IOCG deposits show any preference for specific host rocks, and both range in age from Neoarchean to Pleistocene, within a broad tectonic environment. 相似文献
The experimental determination of anelastic strain recovery (ASR) compliances for three types of rocks (granite, marble, and sandstone) was performed in the laboratory. Preloading of specimens for uniaxial compression creep tests was at 50 % of the uniaxial compressive strength (UCS) for each rock type. We obtained the shear mode Jas(t) and volumetric mode Jav(t) ASR compliances and calculated the ratio of Jas(t) to Jav(t). The Kelvin model for rock rheology was then applied in numerical simulations and the results were in good agreement with the measured data for Jas(t) and Jav(t). These results showed that both the magnitude and rate of increase of the ASR compliances are strongly dependent on the rock type, and the values of the Jas(t)/Jav(t) ratio for a loading of 50 % of the UCS showed a trend leading to different constants for each of the three rock types. Further experimental and numerical analyses showed approximate power-law relationships between the ASR compliances at 50 % of UCS, and both the UCS and the tangential Young’s modulus at 50 % of UCS (Et50). These relationships may be useful for the preliminary estimation of ASR compliances. 相似文献
A stable isotope study of 168 plutonic igneous rock and fivewater samples from Transbaikalia, East Asia, has been made,including 318 whole-rock and mineral 18O/16O analyses and 14D/H analyses. This represents the first detailed isotopic studyof the enormous Phanerozoic K-rich (mostly anorogenic) granitoidbelts of this region, which are thousands of kilometers in lengthand span an age range of >250Ma. Of the five main intrusivesuites, emplacement of the youngest (Permo-Triassic) was accompaniedby intense meteoric-hydrothermal activity, locally causing extreme18O depletio (18O feldspar<–12). This reflects thevery low 18O of the water involved in these systems, which probablyhad 18O < – 20 and D < – 150, consistent withthe high paleolatitude of Transbaikalia in the early Mesozoic(80N). Despite local post-emplacement, hydrothermal 18O-depletioneffects near Permo-Triassic and younger plutons, the variationof magmatic isotopic composition in the five intrusive suites,in space and time, can be clearly discerned using the 18O/16Ovariation in phases such as quartz and sphene that are resistantto sub-solidus exchange. A procedure for analyzing 18O/16O insphene using a laser fluorination technique is described: analysisof samples as small as 0.4 mg (including single crystals ofsphene from granitoids) is possible and provides an effectiveway to estimate the magmatic 18O value of plutonic igneous rocks.Most sphene and quartz 18O values vary by 1.0–2.0% withineach of the five main intrusive suites in Transbaikalia (rangingin age from mid-Paleozoic to Mesozoic), and are uniform bothwithin individual plutons and among plutons of the same suiteseparated by tens or hundreds of kilometers. However, each suitehas a unique range in 18O/16O, indicating that, on a regionalscale, the magmatic 18O values of these granitoids decreasedprogressively in 1% decrements from +10 in the earliest groupto +6 in the youngest. This progression was accompanied by increasesin the concentration of elements such as K and Zr, and decreasesin the concentration of elements such as Sr and Ba. These systematicsrequire large scale deep crustal melting and mixing processesto generate the compositional uniformity of individual plutonsand groups over such wide areas, and also a progressive hybridizationof the crust with alkalic, mantle-derived magmas to generatesyenites and granites with progressively lower 18O values. Thisprocess may be a hallmark of anorogenic granitoid petrogenesisand the intracontinental cratonization process in general, andalso represents an important (though largely cryptic) crustalgrowth mechanism. KEY WORDS: anorogenic granitoids; crustal growth; hybridization; hydrothermal systems; stable isotopes1Present address: Galson Sciences Limited, 5 Grosvenor House, Melton Road, Oakham LE15 6AX, UK. 相似文献
A new method has been suggested for evaluating the overall basicityof minerals and rocks by using ionization reactions involvingone proton: (sum of cations) + H2O = mineral + H+, (sum of cations) + H2O = (sum of normative minerals of a rock)+ H+. The basicity indicators are expressed as standard free energychanges of these reactions (). At standard water pressure (logPH2O = 0) and chemical activity of the metal ions ( log Mn+= 0), the relationship between and alkalinity of solutions(pH) becomes: = –2.303 RTlog H+ = 2.303 RT pH. The overall basicities of rock-forming oxides, minerals andmajor rocks were calculated from the thermodynamic data on ionsin water solutions and solid compounds. 相似文献
A suite of dolerite dykes from the Ahlmannryggen region of westernDronning Maud Land (Antarctica) forms part of the much moreextensive Karoo igneous province of southern Africa. The dykecompositions include both low- and high-Ti magma types, includingpicrites and ferropicrites. New 40Ar/39Ar age determinationsfor the Ahlmannryggen intrusions indicate two ages of emplacementat 178 and 190 Ma. Four geochemical groups of dykes have beenidentified in the Ahlmannryggen region based on analyses of60 dykes. The groups are defined on the basis of whole-rockTiO2 and Zr contents, and reinforced by rare earth element (REE),87Sr/86Sr and 143Nd/144Nd isotope data. Group 1 were intrudedat 190 Ma and have low TiO2 and Zr contents and a significantArchaean crustal component, but also evidence of hydrothermalalteration. Group 2 dykes were intruded at 178 Ma; they havelow to moderate TiO2 and Zr contents and are interpreted tobe the result of mixing of melts derived from an isotopicallydepleted source with small melt fractions of an enriched lithosphericmantle source. Group 3 dyke were intruded at 190 Ma and formthe most distinct magma group; these are largely picritic withsuperficially mid-ocean ridge basalt (MORB)-like chemistry (flatREE patterns, 87Sr/86Sri 0·7035, Ndi 9). However, theyhave very high TiO2 (4 wt %) and Zr (500 ppm) contents, whichis not consistent with melting of MORB-source mantle. The Group3 magmas are inferred to be derived by partial melting of astrongly depleted mantle source in the garnet stability field.This group includes several high Mg–Fe dykes (ferropicrites),which are interpreted as high-temperature melts. Some Group3 dykes also show evidence of contamination by continental crust.Group 4 dykes are low-K picrites intruded at 178 Ma; they havevery high TiO2–Zr contents and are the most enriched magmagroup of the Karoo–Antarctic province, with ocean-islandbasalt (OIB)-like chemistry. Dykes of Group 1 and Group 3 aresub-parallel (ENE–WSW) and both groups were emplaced at190 Ma in response to the same regional stress field, whichhad changed by 178 Ma, when Group 2 and Group 4 dykes were intrudedalong a dominantly NNE–SSW strike. KEY WORDS: flood basalt; depleted mantle; enriched mantle; Ahlmannryggen; Karoo dyke相似文献
With the launch of the German Aerospace Agency's (DLR) Modular Opto-electronic Scanner (MOS) sensor on board the Indian Remote
Sensing satellite (IRS-P3) launched by the Indian Space Research Organization (ISRO) in March 1996, 13 channel multi-spectral
data in the range of 408 to 1010 nm at high radiometric resolution, precision, and with narrow spectral bands have been available
for a variety of land, atmospheric and oceanic studies. We found that these data are best for validation of radiative transfer
model and the corresponding code developed by one of the authors at Space Applications Centre, and called ATMRAD (abbreviated
for ATMospheric RADiation). Once this model/code is validated, it can be used for retrieving information on tropospheric aerosols
over ocean or land. This paper deals with two clear objectives, viz.,
1
Validation of ATMRAD model/code using MOS data and synchronously measured atmospheric data, and if found performing well,
then to
2
derive relationship between MOS radiances and Aerosol Optical Thickness (AOT).
The data validation procedure essentially involves
–
•near-synchronous measurements of columnar aerosol optical thickness and altitude profiles of aerosol concentration using
ground-based multi-filter solar radiometers and Argon-ion Lidar, respectively and
–
•computation of the top-of-the-atmosphere (TOA) radiances from a low reflecting target (near clear water reservoir in the
present study) using the ATMRAD model.
The results show that the model performance is satisfactory and a relationship between the spectral parameters of MOS radiances
and aerosol optical thickness can be established. In this communication, we present the details of the experiments conducted,
database, validation of the ATMRAD model and development of the relationship between AOT and MOS radiance. 相似文献
