首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Turkey currently lacks a fully functional flood forecasting system (FFS). However, the studies necessary for establishing such a system are still being performed by the Turkish State Meteorological Service. The main purpose of this study was to determine the technical architecture of the FFS intended to be developed in Turkey and to design a flood forecasting and inundation-mapping system integrated with spatial data infrastructure (SDI). Because SDIs provide interoperability among the institutions by enabling collective use of data and services, this enables decision makers to take correct and rapid decisions regarding the forecasting. In the design of the system, the Web services architecture presented by the open geospatial consortium that develops international standards for SDI realizations was taken as a basis. Designed with flexibility and an expandable architecture, the system will enable instant access to up-to-date data from different institutions through Web services and meets the requirements of a real-time FFS. While the criteria requiring the expansion of the designed system were explained, its implementation was left for future studies.  相似文献   

2.
Spatial data have been used for the environmental monitoring of the consequences of accidents that involve the transportation of hazardous chemical products. This spatial data infrastructure (SDI), which was created for the sharing and use of spatial data, is limited by the absence of policies to support its establishment. The main objective of this study was to explore the use of social network analysis (SNA) as a tool to identify spatial data sharing between organizations involved in the management of accidents related to road transport of hazardous materials (RTHM). In addition, to discuss the existing policies and institutional agreements, and to initiate a conceptual SDI framework for RTHM sector. In this context, the institutions that are involved with RTHM were identified and information concerning their interest in the use and sharing of spatial data via a SDI was collected through interviews and consolidated. The interviews were at 39 institutions with representative employees. The interview data were tabulated and entered into the UCINET software (2000 version) to calculate metrics of centrality. From the SNA, the flow of data among the participating institutions was identified through the visual representation of the spatial data sharing and use networks. Subsequently, the existing institutional agreements for spatial data sharing were analyzed and discussed. The compiled results enabled the proposal of a conceptual SDI framework to support the management of disasters involving RTHM, based on the application of SNA theory, and the development of a methodology that supports the analysis of interactions among the various actors of an SDI. The purpose is to facilitate the formulation of policies for the sharing of spatial data for decision-making and preventive disaster management. The results indicate that the 39 institutions share spatial data, but this sharing is not always predetermined by formal agreements. Furthermore, there is a strong demand, by the institutions involved in the management of RTHM accidents, regarding legal mechanisms governing the sharing of data for the purpose of producing maps that help to describe actions of preparedness, prevention, management and immediate relief involving RTHM incidents. Finally, it was possible to propose a conceptual framework with data that is considered essential for creating an SDI for RTHM.  相似文献   

3.
Based on the service specifications of the Open Geospatial Consortium (OGC), Spatial Data Infrastructures (SDI) support the visualization, access to vector and raster data or managing and search for spatial data. A standard for distributed spatial data processing was missing for a long time. This issue was addressed by the development of the OpenGIS Web Processing Service (WPS) specification. However, to process and analyze massive Digital Elevation Models (DEM) computing power and disk memory are scarce commodities. Here we show that Grid Computing in combination with OGC Web Services (OWS) is well suited to accomplish high processing performance and storage capacity for large-scale processing tasks of the geo community. To process these massive amounts of geo-data we develop terrain processing services which are made available as grid services. Our results will be demonstrating how to bridge the gap between the grid world and the OGC world for more sophisticated terrain processing.  相似文献   

4.
More recently, driven by rapid and unguided urbanisation and climate change, Ghanaian cities are increasingly becoming hotspots for severe flood-related events. This paper reviews urbanisation dynamics in Ghanaian cities, and maps flood hazard zones and access to flood relief services in Kumasi, drawing insight from multi-criteria analysis and spatial network analysis using ArcGIS 10.2. Findings indicate that flood hazard zones in Kumasi have been created by natural (e.g., climate change) and anthropogenic (e.g., urbanisation) factors, and the interaction thereof. While one would have expected the natural factors to guide, direct and steer the patterns of urban development from flood hazard zones, the GIS analysis shows that anthropogenic factors, particularly urbanisation, are increasingly concentrating population and physical structures in areas liable to flooding in the urban environment. This situation is compounded by rapid land cover/use changes and widespread haphazard development across the city. Regrettably, findings show that urban residents living in flood hazard zones in Kumasi are also geographically disadvantaged in terms of access to emergency services compared to those living in well-planned neighbourhoods.  相似文献   

5.
基于Web的XML Web Service的研究   总被引：2，自引：0，他引：2  
Web服务基于XML的数据交换标准，提供企业将软件作为应用进行发布的网络计算体系，其他客户或用户都可通过Internet访问该在线服务，真正的使企业只面向核心的商务逻辑。本文重点研究了Web服务的核心思想及应用，体系结构，工作流程，从Web服务的创建、发布、到客户端的应用；还讨论了Web服务的安全机制、异步调用。随着微软的．net战略的实施，Web服务将带来第三代网络应用和服务软件的革命。  相似文献   

6.
Interoperability is becoming essential for the today’s geographic information systems. Geographic information is usually available as datasets stored in databases and accessible via GIS. However, these information sources are increasingly heterogeneous and show differences in data formats, database schema and object concepts. To satisfy the increased demand for the use and sharing of geographic data in common applications, considering the heterogeneity and the methods to support interoperability are required by the GIS community. The implementation of Spatial Data Infrastructure (SDI) such as the European INSPIRE (Infrastructure for Spatial Information in the European Community) enables accessibility and the sharing of geographic data and interoperability among the systems. In addition to this, traditional GIS systems perform spatial queries using a keyword-based method. However, this approach remains incapable of fully expressing the users' needs due to a lack of geographic concepts (semantics) in the dataset. Different terms may refer to similar concepts, while the same terms may refer to different concepts. This causes semantic heterogeneity in the dataset. In this context, the most promising approach is the implementation of geospatial semantics by means of ontology in the geospatial dataset to overcome this kind of ambiguity. The aim of this research is to investigate the implementation of INSPIRE as a SDI standard and the use of Semantic Technology to empower the traditional GIS approach. In this regard, a public transportation geoportal has been developed for the experimental investigation which uses a revised sample transportation data complaint with the INSPIRE Transport Network Data Theme and a developed Transportation Ontology Domain, including concepts, relationships and individuals to provide a semantic spatial search.  相似文献   

7.
整装勘查信息系统应用   总被引：1，自引：0，他引：1  
以服务整装勘查业务管理与研究、支撑整装勘查区进展与成果展示为目标,基于GIS开发了以地质、矿产地、工作程度、矿业权、物探、化探、遥感、潜力评价成果等空间数据为基础的整装勘查信息系统。以大湖塘钨(铜)多金属矿整装勘查区为例,对系统的功能进行了应用与验证。案例应用结果表明: 系统界面友好,功能齐全明了,易学习易操作,可将各类数据组合叠加浏览,提供"一张图"的数据空间展示,用户可通过在全国地图上直观地浏览各整装勘查区矿产勘查进展,建立矿产勘查进展空间分布格局,还可以借助系统完成统计分析、专题图件制作等,极大提高了整装勘查业务管理和研究的效率。  相似文献   

8.
Drought as a natural disaster impresses people living. The main tool in better management of such phenomena is to explain its characteristics, using drought indices. The indices use precipitation, temperature, streamflow, and other hydrological variables to explain such events. In this study, standardized precipitation index (SPI) and stream-flow drought index (SDI) were used to develop a new combined drought index (CDI) based on copula functions. The proposed index function was evaluated in Khuzestan, Yazd and Golestan provinces of Iran from 1982 to 2012. These areas introduce different climate conditions. The index was analyzed temporally and spatially. In the temporal analysis, CDI was calculated separately for each station and the finest index was chosen by Kolmogorov–Smirnov and Chi-squared tests. In the spatial analysis, CDI was computed for two main scenarios and twenty sub-scenarios for the whole area of Golestan Province. The optimum index was chosen based on comparison with initial SPI and SDI. The results showed that CDI is more meticulous than both singular SPI and SDI, as it can trace a drought onset earlier and drought duration more accurate than the two individual indices and obviously display extreme states.  相似文献   

9.
This paper describes the development of visual basic program called ‘Linfo’ which can be used for calculation of spatial properties (orientation, length, density, frequency and intersection density) of lineaments. The program allows the user to analyze the orientation of lineaments easily and shows the results in the form of rose diagram. Linfo can handle large number of lineaments at a time and calculates the results faster than any other software. Linfo generates regular square grids over lineament data and calculates the number, length and intersections of lineaments that fall within each cell. The program is validated with lineament data of Kerala state, India and prepared the spatial maps using Inverse Distance Weighted (IDW) interpolation method. The experimental results show that Linfo is useful for generating spatial maps using any interpolation method. Potential application of the program includes demarcation of groundwater potential zones, landslide risk assessment etc.  相似文献   

10.
The efficiency of GIS, RS and multi-criteria tools in isolating potential groundwater (GW) zones in the Kuttiyadi River basin (KRB), Kerala, has been robustly demonstrated by analysis of relevant data. To infer geohydrological makeup and consequent behavior of the KRB in respect of GW potential, firstly, various thematic layers viz. geomorphology, geology, slope, soil, lineament density and drainage density, were created. Secondly, thematic layers and their features were assigned suitable weights on the Saaty’s scale according to their relative significance for the presence and potential of GW. The assigned weights of the layers and their features were normalized using analytic network process method, and then the selected thematic maps were integrated in GIS using weighted overlay method to create the final groundwater prospect zone map. From the outcomes, the groundwater prospect zones of the KRB basin was found to be very good (166.21 km2), good (92.01 km2), moderate (180.33 km2), poor (237.25 km2), which constitute 24, 15, 26 and 35% of the study area, respectively. The GW prospect zone map was finally validated using geohydrology of area and GW level data from 43 phreatic wells in the study area. This study showed that groundwater prospect zone demarcation along with multi-criteria decision making is a powerful tool for proper utilization, planning and management of the precious groundwater resource.  相似文献   

11.
Selection of the optimal product, where several products’ aspects are expressed through criteria, is a multi-criteria decision-making problem. Besides technical, exploitational, functional, structural, market and aesthetic criteria, nowadays, environmental criteria are inevitable aspects of a modern product. Environmental product properties can be successfully evaluated with a life cycle assessment. This paper proposes a multi-criteria decision-making model for optimal product assessment that uses environmental criteria obtained from a life cycle assessment. The proposed model presents a comprehensive approach that aims to overcome complex decision-making problems for optimal product selection, where special attention is given to the product’s environmental impact. Verification of the proposed multi-criteria decision-making and life cycle assessment model was performed on the case study of optimal knee support selection. By changing the criteria weights in multi-criteria decision-making, a sensitivity analysis was performed. The model output results show the product alternatives ranking that supports decision-making in optimal product selection.  相似文献   

12.
Srivastava  Kirti  Rani  Swaroopa  Srinagesh  D. 《Natural Hazards》2014,73(1):97-110
The present study analyses the spatial pattern of quaternary gravitational slope deformations (GSD) and historical/present-day instabilities (HPI) inventoried in the Swiss Rhone Valley. The main objective is to test if these events are clustered (spatial attraction) or randomly distributed (spatial independency). Moreover, analogies with the cluster behaviour of earthquakes inventoried in the same area were examined. The Ripley’s K-function was applied to measure and test for randomness. This indicator allows describing the spatial pattern of a point process at increasing distance values. To account for the non-constant intensity of the geological phenomena, a modification of the K-function for inhomogeneous point processes was adopted. The specific goal is to explore the spatial attraction (i.e. cluster behaviour) among landslide events and between gravitational slope deformations and earthquakes. To discover if the two classes of instabilities (GSD and HPI) are spatially independently distributed, the cross K-function was computed. The results show that all the geological events under study are spatially clustered at a well-defined distance range. GSD and HPI show a similar pattern distribution with clusters in the range 0.75–9 km. The cross K-function reveals an attraction between the two classes of instabilities in the range 0–4 km confirming that HPI are more prone to occur within large-scale slope deformations. The K-function computed for GSD and earthquakes indicates that both present a cluster tendency in the range 0–10 km, suggesting that earthquakes could represent a potential predisposing factor which could influence the GSD distribution.  相似文献   

13.
Image classification is one of the crucial techniques in detecting the crops from remotely sensed data. Crop identification and discrimination provide an important basis for many agricultural applications with various purposes, such as cropping pattern analysis, acreage estimation, and yield estimation. Accurate and faster estimation of crop area is very essential for projecting yearly agriculture production for deciding agriculture policies. Remote sensing is a technique that allows mapping of large areas in a fast and economical way. In many applications of remote sensing, a user is often interested in identifying the specific crop only while other classes may be of no interest. Indian Remote Sensing Satellite (IRS-P6) LISS IV sensor image of spatial resolution 5.8 m has been used to identify the sugarcane crop for the Chhapar village of Muzaffarnagar District, India. Classification of satellite data is one of the primary steps for information extraction for crop land identification. In recent years, decision tree approach to image analysis has been developed for the assessment and improvement of traditional statistically based image classification. In this study, ISODATA, MLC, and vegetation indices based decision tree approaches are used for classifying LISS IV imagery. The 11 vegetation index images have been generated for decision tree classification. All the three methods are compared and it is found that the best performance is given by the decision tree method. Vegetation indices based decision tree method for sugarcane classification, the user’s accuracy, producer’s accuracy, overall accuracy, and kappa coefficient were found 88.17, 86.59, and 87.93% and 0.86 respectively.  相似文献   

14.
Retention of surface-modified nanoscale zero-valent iron (NZVI) particles in the porous media near the point of injection has been reported in the recent studies. Retention of excess particles in porous media can alter the media properties. The main objectives of this study are, therefore, to evaluate the effect of particle retention on the porous media properties and its implication on further NZVI particle transport under different flow conditions. To achieve the objectives, a one-dimensional transport model is developed by considering particle deposition, detachment, and straining mechanisms along with the effect of changes in porosity resulting from retention of NZVI particles. Two different flow conditions are considered for simulations. The first is a constant Darcy’s flow rate condition, which assumes a change in porosity, causes a change in pore water velocity and the second, is a constant head condition, which assumes the change in porosity, influence the permeability and hydraulic conductivity (thus Darcy’s flow rate). Overall a rapid decrease in porosity was observed as a result of high particle retention near the injection points resulting in a spatial distribution of deposition rate coefficient. In the case of constant head condition, the spatial distribution of Darcy’s velocities is predicted due to variation in porosity and hydraulic conductivity. The simulation results are compared with the data reported from the field studies; which suggests straining is likely to happen in the real field condition.  相似文献   

15.
Oracle Spatial几何类型字段解析   总被引：4，自引：0，他引：4  
Oracle Spatial是Oracle数据库中管理空间数据的模块,它采用SDO_GEOMETRY字段存储空间数据。Oracle Spatial更深层次的功能,如索引、查询等,都建立在SDO_GEOMETRY的存储机制上。这里详细介绍了Oracle Spatial中空间对象字段SDO_GEOMETRY的组成及其各个组成对象的定义方法,解析了点(包括复合点)、线(包括复合线)、多边形(包括复合多边形)等空间实体在SDO_GEOMETRY中的存储方式,为其它编程语言访问Oracle Spatial空间对象提供了参考。  相似文献   

16.
Natural Hazards - The aim of this research is to investigate multi-criteria decision making [spatial multi-criteria evaluation (SMCE)], bivariate statistical methods [frequency ratio (FR), index of...  相似文献   

17.
The paper illustrates a Linked Thesaurus Framework for the Environment, named LusTRE, to facilitate data sharing across different environmental disciplines. It provides a knowledge infrastructure of multilingual thesauri and code lists, interlinking them so that they can be used as one integrated linked data source. This multilingual thesaurus is published according to the Linked Data Best Practices and supports metadata compilation and data discovery for describing and finding Environmental geodata. A human readable web interface is provided for the exploitation of LusTRE as well as a set of web services for programmatic access to the knowledge infrastructure. LusTRE has been exploited within the European directive INSPIRE and SEIS piloting testbeds implemented within the EU project eENVplus in order to support cross-border and cross-domain data sharing. It is aimed at supporting multilingual data search and query refinement. In order to show how interlinked content can help users to more easily express metadata within Spatial Data Infrastructures (SDI), LusTRE web services have been integrated within existing metadata editors and geoportals.  相似文献   

18.
The main objective of this study was to establish statistical relationship between Schmidt hammer rebound numbers with impact strength index (ISI), slake durability index (SDI) and P-wave velocity. These are important properties to characterize a rock mass and are being widely used in geological and geotechnical engineering. Due to its importance, Schmidt hammer rebound number is considered as one of the most important property for the determination of other properties, like ISI, SDI and P-wave velocity. Determination of these properties in the laboratory is time consuming and tedious as well as requiring expertise, whereas Schmidt hammer rebound number can be easily obtained on site which in addition is non-destructive. So, in this study, an attempt has been made to determine these index properties in the laboratory and each index property was correlated with Schmidt hammer rebound values. Empirical equations have been developed to predict ISI, SDI and P-wave velocity using rebound values. It was found that Schmidt hammer rebound number shows linear relation with ISI and SDI, whereas exponential relation with P-wave velocity. To check the sensitivity of empirical relations, Student’s t test was done to verify the correlation between rebound values and other rock index properties.  相似文献   

19.
徐战亚  吴信才 《地球科学》2010,35(3):495-500
智能终端和移动互联网的快速发展使得移动空间信息服务成为数字城市和数字地球的重要内容,而各种基于定位导航的嵌入式地理信息系统(geographic information system,GIS)也逐步成为这类信息服务的主要方式.分析了现代移动空间信息服务的特征,采用层次式模块化的方法,介绍了基于GIS的可移植抽象层、多元数据存储模型、电子地图显示引擎和高性能应用服务引擎等关键模块的设计,设计了可移植的嵌入式GIS平台,为通用的移动空间信息服务移动端的应用开发提供了一个切实可行的方案.   相似文献   

20.
Shujuan Li  Daniel Sui 《GeoJournal》2013,78(4):615-626
While Pareto’s law has been widely supported by empirical evidence in urban studies, past studies have focused on finding best fits for city rank-size distribution. A main concern with Pareto’s law is the truncation of sample selection, for which few studies have examined it directly. This study tests three existing threshold methods (number threshold, size threshold, and urban population percentage threshold) using China’s city system as a case study. In addition, this study proposes a new method based upon the percentage threshold of the total number of cities. A systematic analysis is applied to examine the relationship between Pareto exponent and sample size using different threshold methods. The results show that Pareto exponent is sensitive to sample size and the truncation point. Including only large cities is problematic because a slight change in the truncation point will yield quite different results of Pareto exponent. In addition, the new method, the percentage threshold of the total number of cities method, presents an advantage over previous methods, in that this method yields a consistent set of results over a wide range of thresholds. Finally, when using this new method with China’s city system, the Pareto exponent presents a turning point in 1996, representing China’s transition from a planned economy to a more market oriented economy during that period.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号