共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization.We first give an overview of natural phenomena of structurally-controlled ore formation and the background theory and mechanisms for such controls. We then provide the results of a group of simple 2D numerical models validated through comparison with Cu-vein structure observed near the Shilu Copper deposit(Yangchun,Guangdong Province, China) and finally a case study of 3D numerical modelling applied to the Hodgkinson Province in North Queensland(Australia).Two modelling approaches,discrete deformation modelling and continuum coupled deformation and fluid flow modelling,are involved.The 2D model-derived patterns are remarkably consistent with the Cu-vein structure from the Shilu Copper deposit,and show that both modelling approaches can realistically simulate the mechanical behaviours of shear and dilatant fractures.The continuum coupled deformation and fluid flow model indicates that pattern of the Cuveins near the Shilu deposit is the result of shear strain localization,development of dilation and fluid focussing into the dilatant fracture segments.The 3D case-study models(with deformation and fluid flow coupling) on the Hodgkinson Province generated a number of potential gold mineralization targets. 相似文献
2.
3.
Geometric modelling and object-oriented software concepts applied to a heterogeneous fractured network from the Grimsel rock laboratory 总被引：2，自引：0，他引：2
Thomas Kalbacher Ralph Mettier Chris McDermott Wenqing Wang Georg Kosakowski Takeo Taniguchi Olaf Kolditz 《Computational Geosciences》2007,11(1):9-26
Discrete fracture network simulations are computationally intensive and usually time-consuming to construct and configure.
This paper presents a case study with techniques for building a 3D finite element model of an inhomogeneous fracture network
for modelling flow and tracer transport, combining deterministic and stochastic information on fracture aperture distributions.
The complex intersected fractures represent a challenge for geometrical model design, mesh quality requirements and property
allocations. For the integrated and holistic modelling approach, including the application of numerical and analytical simulation
techniques, new object-oriented concepts in software engineering are implemented to ensure a resourceful and practicable software
environment. 相似文献
4.
Modelling flash flood propagation in urban areas using a two-dimensional numerical model 总被引：1，自引：1，他引：0
This paper reports on the numerical modelling of flash flood propagation in urban areas after an excessive rainfall event or dam/dyke break wave. A two-dimensional (2-D) depth-averaged shallow-water model is used, with a refined grid of quadrilaterals and triangles for representing the urban area topography. The 2-D shallow-water equations are solved using the explicit second-order scheme that is adapted from MUSCL approach. Four applications are described to demonstrate the potential benefits and limits of 2-D modelling: (i) laboratory experimental dam-break wave in the presence of an isolated building; (ii) flash flood over a physical model of the urbanized Toce river valley in Italy; (iii) flash flood in October 1988 at the city of Nîmes (France) and (iv) dam-break flood in October 1982 at the town of Sumacárcel (Spain). Computed flow depths and velocities compare well with recorded data, although for the experimental study on dam-break wave some discrepancies are observed around buildings, where the flow is strongly 3-D in character. The numerical simulations show that the flow depths and flood wave celerity are significantly affected by the presence of buildings in comparison with the original floodplain. Further, this study confirms the importance of topography and roughness coefficient for flood propagation simulation. 相似文献
5.
Improved and enhanced oil recovery methods require sophisticated simulation tools to predict the injected flow pass together with the chemical reactions inside it. One approach is application of higher-order numerical schemes to avoid excessive numerical diffusion that is very typical for transport processes. In this work, we provide a first step towards higher-order schemes applicable on general polyhedral and corner-point grids typically used in reservoir simulation. We compare three possible approaches of linear reconstruction and slope limiting techniques on a variety of different meshes in two and three spatial dimensions and discuss advantages and disadvantages. 相似文献
6.
多孔介质渗透系数的空间尺度效应研究进展 总被引：6，自引：1，他引：5
多孔介质渗透系数的空间尺度问题是一个与地下流体运动和溶质运移的数值模拟密切相关的应用性课题,广泛的应用需求和新的计算方法使其成为近年的热门课题之一。它涉及到相互联系的两个方面：①非均质介质场渗透系数空间尺度行为的分析与模拟;②将局部测量尺度下的试验参数转化为数值模拟网格尺度下的参数输入值的升尺度（ｕｐｓｃａｌｉｎｇ）方法和计算模型。首先介绍了该课题在概念上的拓展及其物理含义,进而以方法为主线,对这一领域具有代表性的研究成果进行了分类和评述,讨论了该课题的研究对地下水流和溶质运移的模拟分析乃至整个多孔介质流体运动研究的意义。 相似文献
7.
Geir Terje Eigestad Helge K. Dahle Bjarte Hellevang Fridtjof Riis Wenche Tjelta Johansen Erlend Øian 《Computational Geosciences》2009,13(4):435-450
The Johansen formation is a candidate site for large-scale CO2 storage offshore of the south-western coast of Norway. An overview of the geology for the Johansen formation and neighboring
geological formations is given, together with a discussion of issues for geological and geophysical modelling and integrated
fluid flow modelling. We further describe corresponding simulation models. Major issues to consider are capacity estimation
and processes that could potentially cause CO2 to leak out of the Johansen formation and into the formations above. Currently, these issues can only be investigated through
numerical simulation. We consider the effect of different boundary conditions, sensitivity with respect to vertical grid refinement
and permeability/transmisibility data, and the effect of residual gas saturations, since these strongly affect the CO2-plume distribution. The geological study of the Johansen formation is performed based on available seismic and well data.
Fluid simulations are performed using a commercial simulator capable of modelling CO2 flow and transport by simple manipulation of input files and data. We provide details for the data and the model, with a
particular focus on geology and geometry for the Johansen formation. The data set is made available for download online. 相似文献
8.
Well modeling plays an important role in numerical reservoir simulation. The main difficulty in well modeling is the difference in scale between the wellbore radius and well gridblock dimension used in the simulation. The Peaceman equation is widely used in reservoir simulation to match gridblock pressure to the local solution of the diffusivity equation describing the flow near the well. However, this approach was developed under the assumption of radial flow. At the same time, the well inflow equation can be solved within the Green’s function (GF) formalism which allows the solution to be obtained without the assumption of radial flow. The GF solution can be presented as a series over the eigenvalues of the Laplace differential operator. However, this series converges conditionally and its direct summation is time-consuming. In Posvyanskii et al. (2008), a method for fast summation of such a series was proposed and successfully applied for analyzing the pressure build up curves. In this paper, we adopt the same technique for calculating the well indices for horizontal, slanted and partially penetrated wells. Additionally, the role of different boundary conditions is considered. The semi-analytical expressions for well indices are obtained and compared to the solution of the Peaceman equation. It is shown that in some cases, the difference between these solutions can be significant. The use of the obtained expression in numerical flow simulation allows well inflow to be modeled with high accuracy even on a coarse grid. 相似文献
9.
地下水流系统理论与研究方法的发展 总被引：6，自引：0，他引：6
地下水流系统理论的提出,推动了现代水文地质学的发展。以Tóth经典地下水流系统理论建立方法为基础,综述了基于Tóth方法的地下水流系统的模拟成果,分析了Tóth方法得出的水流模式与控制因素的关系,以及地下水流系统理论从概念到实际应用的发展。同时,对中国地质大学(武汉)提出的地下水流系统通量上边界模拟方法也进行了系统论述,在物理模拟实验与数值模拟基础上,认为通量上边界分析方法是对Tóth方法的改进与完善,有利于对地下水流系统发育的物理机制理解;该方法能够更全面认识地下水流系统模式及其转化,定量出各影响因素对地下水流模式的控制关系。最后指出地下水流系统理论是当代水文地质学的核心概念框架,应该重视地下水流系统理论物理机制和数学模拟方法的研究,加强新技术方法的引入,拓宽其应用领域的研究等。 相似文献
10.
Hysteresis effects in geological CO2 sequestration processes: A case study on Aneth demonstration site,Utah, USA 
下载免费PDF全文
下载免费PDF全文 Realistic models for saturation, capillary pressure and relative permeability s-pc-kr relations are essential for accurate predictions in multiphase flow simulations. The primary object of this work is to investigate their influence on geological CO2 sequestration processes. In this work, the hysteresis effects on simulation results predicting geological CO2 storage are investigated on a synthetic 2D model and a geological setting built according to Aneth demonstration site. Simulation results showed that hysteretic relative permeability model should be included while the residual trapping mechanism is under investigation. The effects of hysteresis and WAG schemes were studied with a series of numerical simulations on a geological setting based on Aneth site. Our simulations demonstrate that the hysteresis effect is strong on residual trapping mechanisms and there is no significant effects of alternative WAG schemes for long term residual trapping in our conceptual model. The effects of WAG schemes and hysteresis are weak on dissolution trapping mechanisms. 相似文献
11.
随着计算机科学和地质大数据技术的迅猛发展,数值模拟和机器学习已成为当今地学领域定量发展的重要前沿方向。数值模拟综合运用了研究区地质、构造、地球物理、地球化学等多源信息,将成矿条件与过程进行量化模拟分析,对研究成矿动力学演化过程及成矿响应有重要意义,可对已有成矿要素/信息在时空上进行扩展/外推,扩大了成矿预测信息的广度和深度,为解决深部成矿预测中获取深部信息难题提供了一种可能的有效途径。支持向量机是一种重要的机器学习分类算法,它具有简洁、方便、高效和计算结果较稳定等特点,在众多领域中得以成功应用,是成矿预测中多源信息提取与融合的一种可靠的技术手段。为了充分利用数值模拟与机器学习的优势,本文提出将计算机数值模拟方法和机器学习(即支持向量机算法)相结合来进行深部成矿预测的新方法。以粤北凡口超大型铅锌矿为例,首先,对凡口矿区勘探线剖面进行构造应力场模拟;进而,以已知钻孔数据作为训练集和测试集,运用支持向量机算法对模拟结果中的不同参量(也即模拟所得的成矿条件)进行训练学习;最后,建立相应的定量找矿预测模型对研究区(或剖面)外围和深部找矿进行预测评价。研究结果表明,本文所建立的预测模型精确度和召回率都较好,预测结果显示出了三个成矿可能较大的区域,说明数值模拟技术和机器学习算法结合应用的效果较好。这种新的成矿预测方法为深部找矿预测提供了一种可行的新思路和新途径,可以有效地拓展运用到其他矿区、其他类型矿床的深部找矿预测工作中。 相似文献
12.
地下水流系统理论和数值模拟技术分别是水文地质学的基本理论和技术方法,含水岩组的概化是地下水流系统分析和地下水数值模拟的重要基础,直接影响着数值模拟和水流系统分析的精度和可信度.为提高含水岩组概化的精度和可信度,提出一种含水岩组概化的新方法,即累积导水系数法.依据岩层厚度与渗透系数乘积累积值随深度的变化,以及水文地质剖面岩性分布的整体特征,概化含水介质结构.以玛纳斯河流域为例,应用该方法概化流域内的岩性剖面,结合GMS软件中TINS模块构建水文地质结构模型.结果表明,应用该方法概化后的含水层结构具有较好的合理性和仿真性,建立的三维模型很好地显示了研究区含水介质的空间展布特征,为建立地下水流模型奠定了良好的基础. 相似文献
13.
The Soultz Enhanced Geothermal System (EGS) reservoir's response to chemical stimulation is assessed by numerical simulation of coupled thermo-hydraulic-chemical processes. To assess chemical interactions between host rocks and a mixture of HCl and HF as well as its potential effects on the Soultz EGS reservoir, new modelling efforts using the FRACHEM code have been initiated. This article presents the model calibration and results. Simulations consider realistic conditions with available data sets from the EGS system at Soultz. Results indicate that the predicted amount of fracture sealing minerals dissolved by injection of a mixture of acids Regular Mud Acid (RMA) was consistent with the estimated amount from the test performed on GPK4 well at Soultz EGS site. Consequently reservoir porosity and permeability can be enhanced especially near the injection well by acidizing treatment. 相似文献
14.
The paper deals with numerical simulation techniques for forward and inverse modelling in multiphase (multicomponent) flow through porous media. The forward simulation software system MUFTE-UG uses recent discretization techniques and fast solvers. The efficient integration of optimization strategies for the solution of the inverse problems is demonstrated in detail and also applied to practical numerical examples. 相似文献
15.
A.P.S. Selvadurai 《Engineering Geology》1996,41(1-4):219-238
The paper presents the application of a Galerkin finite-element technique for the numerical solution of the differential equations governing coupled heat flow and moisture movement in a clay buffer. Attention is focussed on the axisymmetric modelling of the hygro-thermal processes encountered in the single borehole emplacement configuration developed for laboratory simulation. The numerical results derived for the time-dependent temperature distributions within the granite block and the residual moisture distribution within the buffer are compared with the respective experimental results. 相似文献
16.
声波散射数值模拟的两种新方案 总被引：4，自引：0，他引：4
孙建国 《吉林大学学报(地球科学版)》2006,36(5):863-868
声波散射的数值模拟问题一般用网格法或积分方程法解决。当模型的尺度很大时,两种方法都会遇到计算机资源不足所造成的困难。另外,在网格法中,场源的位置和场源附近的波场奇异性逼近精度都受网格点的控制,因此难以满足实际问题所提出的要求。针对这些问题,提出了两种处理声波散射问题的新方案。一种主要针对网格法,另外一种针对积分方程法。在针对网格法的方案中,通过模型分解和波场分裂,将原始的总场计算问题转化为散射场计算问题。由于背景场是由解析公式给出的,所以可以将场源放置在数值网格的任意位置,不一定非得在网格点上。基于同样的原因,场源附近的波场奇异性可以精确地算出。在针对积分方程法的方案中,通过引入拟线性近似,使得散射场的数值求解不必再借助于代数方程组,只要进行数值积分即可。所建立的数值计算方案具有普遍的适用性,其基本思想可以直接用于解决弹性波散射的数值模拟问题并用于反演密度和速度。 相似文献
17.
One of the challenges for reservoir simulation is numerical dispersion. For waterflooding applications the effect is controlled
due to the self-sharpening nature of a Buckley–Leverett shock. However, for multi-component flow simulations, incorrect wavespeeds
can develop leading to the excessive smearing of fronts because of the coupling of compositional dispersion with the fractional
flow. Rather than implementing a higher-order discretization method, we propose a simple scheme based on segregation-in-flow
within a gridblock to control numerical dispersion. We extend the method originally proposed for polymer flooding to augmented
waterflooding simulations in general as well as simulations of miscible or near miscible gas injection. For compositional
simulations of gas injection, this is done through a coupled limited-flash/upstream-exclusion assumption. To test the scheme,
an in-house streamline simulator has been modified and validated for modeling low-salinity floods as well as ternary two-phase
displacements. Simulation results presented with and without segregation demonstrate the potential of the approach as a heuristic
method to control numerical dispersion in multi-component flow simulations. 相似文献
18.
Finite element simulation of fluid flow in fractured rock media 总被引：4，自引：3，他引：1
Fluid dynamics models are used by the petroleum industry to model single- and/or multi-phase flow within fractured rock formations,
in order to facilitate extraction of fluids such as oil and natural gas, and in other areas of engineering to study groundwater
flow, as well as to estimate contaminant seepage and transport. In this paper, the numerical modelling software Comsol is used to simulate air and water flow through a specimen of granite with a single vertical fracture subjected to triaxial
loading conditions. The intent of the model is to simulate triaxial test findings on a rock specimen with a natural fracture.
Fluid flow is simulated at various confining and inlet pressures using the cubic law. Model results were in good agreement
with laboratory findings. Pressure distribution along the fracture and across the specimen are as expected with a near linear
pressure distribution along the length of the fracture. A drawdown effect on pressure distribution across the specimen in
the vicinity of the fracture is also observed. Pressure gradient was largely uniform; however, some localised zones of high
gradient along the fracture are observed. 相似文献
19.
Assessment of Discharge through a Dike Breach and Simulation of Flood Wave Propagation 总被引：2，自引：0，他引：2
This paper presents a simple and fast method to calculate flow through a dike breach. The approach was based on two-dimensional
numerical simulations of idealized dike breakages at straight river-sections. As a result, computation of discharge through
a breach can be achieved by use of the new developed formula (denoted as dike break formula). Furthermore, a methodology that combines one-dimensional hydrodynamic modelling, the dike break formula and a simple GIS-based
method to estimate inundation areas is described. This fast and easy-to-handle tool can be utilized for near real-time forecasting
or evacuation decisions. Detailed predictions were made for a number of flood and dike break scenarios at the River Rhine
to prove the accuracy of the new method compared with two-dimensional numerical models. 相似文献
20.
储层流动单元是指影响流动的岩性和岩石物理性质在内部相似,在垂向上和横向上连续的储集带,它是基于油藏数值拟的目的提出的,对于油气田开发,特别是对二次采油和三次采油具有较大的实际意义,目前国内外对流动单元的研究主要集中于探索流动单元的划分方法,笔者在研究各种划分方法的基础上提出了一种最简单的划分方法,该方法可直接从测井解释成果图图上读取数据,求出存储系数和渗流系数,通过聚类分析划分出流动单元,该方法虽有不足,但简便易行,且在单一沉积微相中可取得很好的效果。 相似文献