共查询到20条相似文献，搜索用时 343 毫秒
1.
Mathematical simulation of non‐isothermal multiphase flow in deformable unsaturated porous media is a complicated issue because of the need to employ multiple partial differential equations, the need to take into account mass and energy transfer between phases and because of the non‐linear nature of the governing partial differential equations. In this paper, an analytical solution for analyzing a fully coupled problem is presented for the one‐dimensional case where the coefficients of the system of equations are assumed to be constant for the entire domain. A major issue is the non‐linearity of the governing equations, which is not considered in the analytical solution. In order to introduce the non‐linearity of the equations, an iterative discretized procedure is used. The domain of the problem is divided into identical time–space elements that cover the time–space domain. A separate system of equations is defined for each element in the local coordinate system, the initial and boundary conditions for each element are obtained from the adjacent elements and the coefficients of the system of equations are considered to be constant in each step. There are seven governing differential equations that should be solved simultaneously: the equilibrium of the solid skeleton, mass conservation of fluids (water, water vapor and gas) and energy conservation of phases (solid, liquid and gas). The water vapor is not in equilibrium with water and different phases do not have the same temperature. The governing equations that have been solved seem to be the most comprehensive in this field. Three examples are presented for analyzing heat and mass transfer in a semi‐infinite column of unsaturated soil. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
2.
Wave propagation and strain localization in a fully saturated softening porous medium under the non‐isothermal conditions 
下载免费PDF全文
下载免费PDF全文 The (THM) coupling effects on the dynamic wave propagation and strain localization in a fully saturated softening porous medium are analyzed. The characteristic polynomial corresponding to the governing equations of the THM system is derived, and the stability analysis is conducted to determine the necessary conditions for stability in both non‐isothermal and adiabatic cases. The result from the dispersion analysis based on the Abel–Ruffini theorem reveals that the roots of the characteristic polynomial for the THM problem cannot be expressed algebraically. Meanwhile, the dispersion analysis on the adiabatic case leads to a new analytical expression of the internal length scale. Our limit analysis on the phase velocity for the non‐isothermal case indicates that the internal length scale for the non‐isothermal THM system may vanish at the short wavelength limit. This result leads to the conclusion that the rate‐dependence introduced by multiphysical coupling may not regularize the THM governing equations when softening occurs. Numerical experiments are used to verify the results from the stability and dispersion analyses. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
3.
A hierarchical mathematical model for analyses of coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes at high temperature is presented. The concretes are modelled as unsaturated deforming reactive porous media filled with two immiscible pore fluids, i.e. the gas mixture and the liquid mixture, in immiscible–miscible levels. The thermo‐induced desalination process is particularly integrated into the model. The chemical effects of both the desalination and the dehydration processes on the material damage and the degradation of the material strength are taken into account. The mathematical model consists of a set of coupled, partial differential equations governing the mass balance of the dry air, the mass balance of the water species, the mass balance of the matrix components dissolved in the liquid phases, the enthalpy (energy) balance and momentum balance of the whole medium mixture. The governing equations, the state equations for the model and the constitutive laws used in the model are given. A mixed weak form for the finite element solution procedure is formulated for the numerical simulation of chemo‐thermo‐hygro‐mechanical behaviours. Special considerations are given to spatial discretization of hyperbolic equation with non‐self‐adjoint operator nature. Numerical results demonstrate the performance and the effectiveness of the proposed model and its numerical procedure in reproducing coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes subjected to fire and thermal radiation. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
4.
A semi‐analytical approach is developed for modeling 3D heat transfer in sparsely fractured rocks with prescribed water flow and heat source. The governing differential equations are formulated, and the corresponding integral equations over the fracture faces and the distributed heat source are established in the Laplace transformed domain using the Green function method with local systems of coordinates. The algebraic equations of the Laplace transformed temperatures of water in the fractures are formed by dividing the integrals into elemental ones; in particular, the fracture faces are discretized into rectangular elements, over which the integrations are carried out either analytically for singular integrals when the base point is involved or numerically for regular integrals when otherwise. The solutions of the algebraic equations are inverted numerically to obtain the real‐time temperatures of water in the fractures, which may be employed to calculate the temperatures at prescribed locations of the rock matrix. Three example calculations are presented to illustrate the workability of the developed approach. The calculations found that water flux in the fractures may decrease the rate of temperature rise in regions close to the distributed heat source and increase the rate of temperature rise in regions downstream away from the distributed heat source and that the temperature distribution and evolvement in a sparsely fractured rock mass may be significantly influenced by water flow exchange at intersection of fractures. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
5.
非饱和介质中热能传输及水分迁移的数值积分解 总被引：1，自引：0，他引：1
在给出非饱和介质热能-水分传输的耦合质量控制方程和基于Fourier热传导定律的热能平衡方程的基础上,对热能传输及水分迁移的基本特征和机理进行了分析。其中,考虑了温度势、吸力势和重力势的耦合作用影响。给出有热源时控制方程的简化形式,并对半无限体自由表面作用平面热源条件下介质内非稳态温度场、体积含水率分布场进行数值积分求解。利用这些解答给出常热源强度和变热源强度两种情况下,温度场随时间的变化特征以及水分迁移的演化过程,并分析了重力项对计算结果的影响。 相似文献
6.
Theoretical analyses of chemical dissolution‐front instability in fluid‐saturated porous media under non‐isothermal conditions 下载免费PDF全文
下载免费PDF全文 This paper mainly deals with the theoretical aspects of chemical dissolution‐front instability problems in two‐dimensional fluid‐saturated porous media under non‐isothermal conditions. In the case of the mineral dissolution ratio (that is defined as the ratio of the dissolved‐mineral equilibrium concentration in the pore fluid to the molar concentration of the dissolvable mineral in the solid matrix of the fluid‐saturated porous medium) approaching zero, the corresponding critical condition has been mathematically derived when temperature variation effects are considered. As a complementary tool, the computational simulation method is used to simulate the morphological evolution of chemical dissolution fronts in two‐dimensional fluid‐saturated porous media under non‐isothermal conditions. The related theoretical and numerical results have demonstrated that: (i) a temperature increase in a non‐isothermal chemical dissolution system can have some influence on the propagation speed of the planar chemical dissolution front in the system. Generally, the chemical dissolution front in the non‐isothermal chemical dissolution system propagates slower than that in the counterpart isothermal chemical dissolution system when the temperature of the non‐isothermal chemical dissolution system is higher than that of the counterpart isothermal chemical dissolution system; (ii) a temperature increase in the non‐isothermal chemical dissolution system can stabilize the chemical dissolution front propagating in the system, because it can cause a decrease in the Zhao number of the system but does not affect the critical Zhao number of the system; and (iii) the temperature gradient in the upstream direction of a chemical dissolution front is smaller than that in the downstream direction of the chemical dissolution front when the non‐isothermal chemical dissolution system is supercritical. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
7.
8.
The present study investigates propagation of a cohesive crack in non‐isothermal unsaturated porous medium under mode I conditions. Basic points of skeleton deformation, moisture, and heat transfer for unsaturated porous medium are presented. Boundary conditions on the crack surface that consist of mechanical interaction of the crack and the porous medium, water, and heat flows through the crack are taken into consideration. For spatial discretization, the extended finite element method is used. This method uses enriched shape functions in addition to ordinary shape functions for approximation of displacement, pressure, and temperature fields. The Heaviside step function and the distance function are exploited as enrichment functions for representing the crack surfaces displacement and the discontinuous vertical gradients of the pressure and temperature fields along the crack, respectively. For temporal discretization, backward finite difference scheme is applied. Problems solved from the literature show the validity of the model as well as the dependency of structural response on the material properties and loading. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
9.
A non‐equilibrium sorption—advection—diffusion model to simulate miscible pollutant transport in saturated–unsaturated soils is presented. The governing phenomena modelled in the present simulation are: convection, molecular diffusion, mechanical dispersion, sorption, immobile water effect and degradation, including both physical and chemical non‐equilibrium processes. A finite element procedure, based on the characteristic Galerkin method with an implicit algorithm is developed to numerically solve the model equations. The implicit algorithm is formulated by means of a combination of both the precise and the traditional numerical integration procedures. The stability analysis of the algorithm shows that the unconditional stability of the present implicit algorithm is enhanced as compared with that of the traditional implicit numerical integration procedure. The numerical results illustrate good performance of the present algorithm in stability and accuracy, and in simulating the effects of all the mentioned phenomena governing the contaminant transport and the concentration distribution. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
10.
11.
饱和多孔介质热-水-力控制方程耦合项的意义及耦合影响分析 总被引：2，自引：0，他引：2
基于饱和多孔介质完全耦合条件下热-水-力控制方程的一般形式,对各耦合项的物理意义进行了分析。以等温条件下水-力耦合的Biot渗透固结理论和等压条件下热-力耦合的热弹性理论两种退化形式为基础,给出耦合系数的物理意义及其函数表达式。研究表明,其中一些耦合系数实际上有相同的物理意义和数学形式,因而可使控制方程得到简化。针对不同的介质特性以及热、水、力条件,给出几种特定情形下控制方程的简化形式。以无限大多孔介质中球域热源的热力学响应分析为例,对一些耦合项的影响程度进行了比较研究。 相似文献
12.
This paper introduces an unconventional constitutive model for soils, which deals with a unified thermo‐mechanical modelling for unsaturated soils. The relevant temperature and suction effects are studied in light of elasto‐plasticity. A generalized effective stress framework is adopted, which includes a number of intrinsic thermo‐hydro‐mechanical connections, to represent the stress state in the soil. Two coupled constitutive aspects are used to fully describe the non‐isothermal behaviour. The mechanical constitutive part is built on the concepts of bounding surface theory and multi‐mechanism plasticity, whereas water retention characteristics are described using elasto‐plasticity to reproduce the hysteretic response and the effect of temperature and dry density on retention properties. The theoretical formulation is supported by comparisons with experimental results on two compacted clays. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
13.
Nathalie Boukpeti 《国际地质力学数值与分析法杂志》2008,32(13):1661-1691
A solution to the problem of freezing of a poroelastic material is derived and analysed in the case of one‐dimensional deformation. The solution is sought within the framework of thermo‐poroelasticity, with specific account of the behaviour of freezing materials. The governing equations of the problem can be combined into a pair of coupled partial differential equations for the temperature and the fluid pressure, with particular forms in the freezing and the unfrozen regions. In the freezing region, the equations are highly non‐linear, partly due to the dependence of thermal and hydraulic properties on water saturation, which varies with temperature. Consequently, the solution is obtained through numerical methods, with special attention to the propagation of the freezing front boundary. The response to one‐dimensional freezing is illustrated for the case of cement paste. Finally, the influence on the solution of varying selected parameters is analysed, such as the temperature boundary conditions, the parameters characterizing the geometry of the porous system, the ratio of fluid and thermal diffusivities, and the rate of cooling applied at the freezing end. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
14.
The paper presents a mechanical model for non‐isothermal behaviour of unsaturated soils. The model is based on an incrementally non‐linear hypoplastic model for saturated clays and can therefore tackle the non‐linear behaviour of overconsolidated soils. A hypoplastic model for non‐isothermal behaviour of saturated soils was developed and combined with the existing hypoplastic model for unsaturated soils based on the effective stress principle. Features of the soil behaviour that are included into the model, and those that are not, are clearly distinguished. The number of model parameters is kept to a minimum, and they all have a clear physical interpretation, to facilitate the model usefulness for practical applications. The step‐by‐step procedure used for the parameter calibration is described. The model is finally evaluated using a comprehensive set of experimental data for the thermo‐mechanical behaviour of an unsaturated compacted silt. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
This paper presents a complete finite‐element treatment for unsaturated soil problems. A new formulation of general constitutive equations for unsaturated soils is first presented. In the incremental stress–strain equations, the suction or the pore water pressure is treated as a strain variable instead of a stress variable. The global governing equations are derived in terms of displacement and pore water pressure. The discretized governing equations are then solved using an adaptive time‐stepping scheme which automatically adjusts the time‐step size so that the integration error in the displacements and pore pressures lies close to a specified tolerance. The non‐linearity caused by suction‐dependent plastic yielding, suction‐dependent degree of saturation, and saturation‐dependent permeability is treated in a similar way to the elastoplasticity. An explicit stress integration scheme is used to solve the constitutive stress–strain equations at the Gauss point level. The elastoplastic stiffness matrix in the Euler solution is evaluated using the suction as well as the stresses and hardening parameters at the start of the subincrement, while the elastoplastic matrix in the modified Euler solution is evaluated using the suction at the end of the subincrement. In addition, when applying subincrementation, the same rate is applied to all strain components including the suction. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
16.
针对高放射性核废物地下处置库近场饱和裂隙岩体环境,提出一种由分布热源、饱和单裂隙和两侧无限大岩石构成的三维水流-传热简化模型,建立了控制微分方程和基于拉氏变换域格林函数的积分方程;采用矩形单元把裂隙面域离散化,利用极坐标下的解析方法计算包含奇点的单元积分,利用数值方法计算分布热源和不包含奇点的单元积分,建立拉氏变换域的线性代数方程组,求解后,利用拉氏数值逆变换,计算任意时刻裂隙水和岩石的温度分布。对两个无内热源、流场确定的计算模型进行了计算,与仅考虑岩石沿裂隙面法向一维热传导的解析解进行了对比。计算分析了分布热源作用下饱和单裂隙岩体的三维水流-传热特征及其对裂隙水流速、岩石热传导系数和热源热流集度的敏感度。计算结果表明：与直接采用高斯数值积分相比,提出的解析法奇异积分精度较高;就裂隙水温度而言,单裂隙岩体三维水流-传热半解析计算方法与解析法得到的结果基本一致,但由于半解析计算方法考虑了岩石的三维热传导,使得裂隙水的上游温度较低,而下游温度较高;无分布热源作用时,岩石热传导系数越大,裂隙水温度越低;裂隙水流速越大,裂隙进水温度对裂隙水和岩石温度分布的影响越明显;由于受到裂隙水流动传热的作用,分布热源对裂隙水温度和岩石温度的影响在裂隙水流的下游区域比较显著。 相似文献
17.
This paper presents a theoretical approach to analyse coupled, linear thermoporoelastic fields in a saturated porous medium under radial and spherical symmetry. The governing equations account for compressibility and thermal expansion of constituents, heat sink due to thermal dilatation of water and thermal expansion of the medium, and thermodynamically coupled heat–water flow. It has been reported in the literature that thermodynamically coupled heat–water flows known as thermo-osmosis and thermal filtration have the potential to significantly alter the flow fields in clay-rich barriers in the near field of a underground waste containment scheme. This study presents a mathematical model and examines the effects of thermo-osmosis and thermal-filtration on coupled consolidation fields in a porous medium with a cavity. Analytical solutions of the governing equations are presented in the Laplace transform space. A numerical inversion scheme is used to obtain the time-domain solutions for a cylindrical cavity in a homogeneous or a non-homogeneous medium. A closed form time-domain solution is presented for a spherical cavity in a homogeneous medium. Selected numerical solutions for homogeneous and non-homogeneous media show a significant increase in pore pressure and displacements due to the presence of thermodynamically coupled flows and a negligible influence on temperature. © 1998 John Wiley & Sons, Ltd. 相似文献
18.
分布热源作用下裂隙岩体渗流-传热的拉氏变换-格林函数半解析计算方法 总被引：1，自引：0，他引：1
以裂隙岩体高放射性核废物地下处置库性能评估为目标,提出了分布热源作用下单裂隙岩体渗流-传热的简化概念模型、控制微分方程和拉氏变换-格林函数半解析法,为进一步采用半解析法计算分布热源作用下多裂隙岩体的渗流-传热问题奠定了基础。针对单裂隙岩体的渗流-传热问题,建立考虑岩石内热源和二维热传导的控制微分方程,利用拉氏变换域微分方程的基本解建立格林函数积分方程,采用解析法处理其中的奇点,通过数值积分和拉氏数值逆变换求解,计算任意时刻裂隙水和岩石的温度分布。通过算例,与基于岩石一维热传导假定的解析解进行了对比,并计算分析了分布热源作用下单裂隙岩体的渗流-传热特征及其对裂隙开度、岩石热传导系数和热流集度的敏感度。算例表明,（1）就裂隙水温度而言,由于考虑了岩石的二维热传导,拉氏变换-格林函数半解析解小于基于岩石一维热传导假定的解析解;（2）裂隙水温度和岩石温度对裂隙开度和热流集度的敏感度较大,对岩石热传导系数的敏感度较小。 相似文献
19.
This paper presents an analytical solution for cavity expansion in thermoplastic soil considering non‐isothermal conditions. The constitutive relationship of thermoplasticity is described by Laloui's advanced and unified constitutive model for environmental geomechanical thermal effect (ACMEG‐T), which is based on multi‐mechanism plasticity and bounding surface theory. The problem is formulated by incorporating ACMEG‐T into the theoretical framework of cavity expansion, yielding a series of partial differential equations (PDEs). Subsequently, the PDEs are transformed into a system of first‐order ordinary differential equations (ODEs) using a similarity solution technique. Solutions to the response parameters of cavity expansion (stress, excess pore pressure, and displacement) can then be obtained by solving the ODEs numerically using mathematical software. The results suggest that soil temperature has a significant influence on the pressure‐expansion relationships and distributions of stress and excess pore pressure around the cavity wall. The proposed solution quantifies the influence of temperature on cavity expansion for the first time and provides a theoretical framework for predicting thermoplastic soil behavior around the cavity wall. The solution found in this paper can be used as a theoretical tool that can potentially be employed in geotechnical engineering problems, such as thermal cone penetration tests, and nuclear waste disposal problems. 相似文献
20.
Su Kong Ngien Norhan A. Rahman Roland W. Lewis Kamarudin Ahmad 《国际地质力学数值与分析法杂志》2012,36(10):1330-1349
A numerical model describing the flow of multiphase, immiscible fluids in a deformable, double‐porosity featured soil has been developed. The model is focused on the modelling of the secondary porosity features in soil, which is more relevant to groundwater contamination problems. The non‐linear saturation and relative permeabilities were expressed as functions of the capillary pressures. The governing partial differential equations in terms of soil displacement and fluid pressures were solved numerically. Galerkin's weighted‐residual finite element method was employed to obtain the spatial discretization whereas temporal discretization was achieved using a fully implicit scheme. The model was verified against established, peer‐reviewed works, and the assumption that the immiscible fluids (non‐aqueous phase liquids) will flow preferentially through the secondary porosity features in soil was validated. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献