共查询到20条相似文献，搜索用时 62 毫秒
1.
盾构法施工过程的有限元模拟 总被引：3，自引：0，他引：3
在综合考虑了现有的有限元模拟方法的基础上,对部分仿真模拟细节进行了改进,改进了水平荷载的施加方法,用"等代层"来模拟盾尾建筑空隙,用预设单元的刚度迁移来模拟盾构的推进过程。通过对某地铁隧道盾构施工过程的模拟,分析了盾构推进过程中地表土体的位移与变形,计算得到的隧道横断面和隧道纵向地面沉降分布曲线与实测数据比较接近,结果证明了模拟方法是可行的。 相似文献
2.
为了解软弱土层盾构隧道围岩的变形特性,结合某市地铁盾构下穿既有桥梁结构工程实例,建立每个分析步下盾构动态掘进三维数值模型。模型建立在库仑屈服准则和孔隙水达西定律推导的固结有限元方程上,综合考虑刀盘扭矩、推进力、土仓压力、桥基荷载及孔隙水压力等影响盾构施工质量的诸多因素,结合室内三轴实验和现场实测数据,对盾构动态掘进过程建模原理、模型合理性、围岩变形特性及桥梁结构安全等问题进行研究。研究结果表明:盾构掘进对围岩变形影响表现为接近、穿越和远离3个阶段;盾构接近断面时,受刀盘扭矩、推进力和土仓压力的影响,前方地表出现拱起;盾构穿过、远离断面后,围岩发生沉降、向隧道内和向前运动趋势,变形主要集中洞口上方,呈槽型;地表/桥基沉降计算和实测值吻合,围岩变形能够满足盾构隧道施工安全。 相似文献
3.
当盾构隧道平行侧穿建筑物时,大多关注建筑物的横向沉降规律,对其纵向沉降关注较少。为此,针对盾构隧道平行侧穿建筑物引发的空间变形开展研究。首先,对天津地铁6号线平行侧穿四座结构形式相近的砖混建筑的实测数据进行分析,得到建筑物基本变形模式;基于工程实测并考虑土体的小应变硬化特性建立三维有限元数值分析模型,研究了盾构侧穿引发的建筑物纵向挠曲、土体变形与应力变化规律,并分析了不同建筑平面长宽比的影响。结果表明,盾构隧道平行侧穿将诱发平面长宽比较大的建筑出现"下凹式"挠曲变形,纵墙中部沉降最大可为其角点沉降的2倍,平行侧穿并不能简化为平面应变问题进行分析。建筑物修建和盾构开挖将导致隧道上方土体经历较为复杂的应力变化过程,并可划分为6个阶段。沿建筑纵向基础中部的土体与边缘土体相比,其首先经历更大的压缩变形(建筑施工导致),在盾构穿越后又产生了更大的卸荷变形。当建筑平面长宽比小于2时,盾构开挖导致的纵向挠曲变形将显著减小。 相似文献
4.
Multiline tunneling construction in soft soil significantly impedes risk control and environmental protection. Current research has investigated on the effect of single-line shield excavation on surrounding environments and tunneling for parallel-crossing or perpendicular down-crossing underground structures. However, minimal attention has been given to soil disturbances induced by multiline tunneling and complex overlapped interaction mechanics for adjacent structures, such as existing above-crossing and down-crossing subway tunnels. Few studies focus on oblique crossing construction and setting rules for the operation parameters of shield machines. Based on the Shanghai Railway transportation project and in situ monitoring data, the deformation analyses of existing subway tunnels induced by an earth pressure balance (EPB) shield during the process of above-overlapped and down-overlapped crossing tunnels with oblique angles are presented. The deformation analyses employ the three-dimensional finite element (3D FE) numerical simulation method, and the simplified analytical method. The analysis results from the theoretical methods are consistent with the monitoring data. The setting rules of multiline propulsion main parameters, including the earth pressure for cutting open, and the synchronized grouting, are also established. This study may provide a theoretical basis for the development of properly overlapped crossing schemes and geotechnical protective measures during multiline tunneling construction in soft soil. 相似文献
5.
防止盾构隧道开挖面失稳的关键是合理设置不同盾构支护平衡模式下的支护压应力。在改进的筒仓楔形体模型计算方法得出的开挖面松动土体对刀盘压力呈近似呈抛物线分布的基础上,研究了气压支护模式、泥水支护模式和土压支护模式下,盾构隧道开挖面分别在地下水位以上和地下水位以下时开挖面的稳定性,研究结果表明:有效支护应力均匀分布时,除粘土开挖面下部失稳外,其余土体均为开挖面中下部失稳;有效支护压应力呈上小下大的梯形分布时,除软粘土开挖面下部失稳外,其余土体均为开挖面上部失稳;有效支护应力呈上大下小的梯形分布时,所有土体开挖面均为下部失稳;在气压、泥水和土压平衡支护模式下,开挖面在未到达筒仓楔形体模型所假设的开挖面整体失稳前,开挖面已经发生了局部失稳,采用筒仓楔形体模型确定的极限稳定支护力是不安全的。最后给出了开挖面松动土体对刀盘压应力公式中计算参数的无量纲化图,以方便实际工程运用。 相似文献
6.
7.
地铁施工引起的临近既有管道变形是城市轨道交通建设中较为关心的施工问题。目前,针对该领域的研究一般假定地基土体均质,而没有考虑地基的自然成层性,此外大多没有考虑既有管道变形与土体自由位移场相互作用的耦合效应。为此,基于弹性层状半空间地基模型,针对隧道开挖边界引入非均匀收敛变形径向土体位移移动模式,提出了层状地基中地铁施工垂直穿越既有管道变形的耦合分析方法和两阶段分析方法,并进行了算例对比和参数分析。结果表明:耦合方法在分析非均质层状地基时具有较好的计算精度,其精度要高于基于Loganathan和Poulos公式的两阶段方法;同时,地基土体的成层性对既有地下构筑物的变形性能具有较大影响。研究成果可为合理制定城市地铁施工对周围环境影响的保护措施提供一定的理论依据。 相似文献
8.
An analytical model to simulate the penetration of the piezocone penetrometer in cohesive soils is presented here. The elasto-plastic coupled field equations of the saturated cohesive soils (given by Voyiadjis and Abu-Farsakh) is used in this analysis. The numerical simulation of the piezocone penetration is implemented into a finite element program. The analytical model is used to analyze the miniature piezocone penetration tests (PCPT) conducted at LSU calibration chambers. Simulation of the piezocone penetration is done for two cases. In the first case, the soil–penetrometer interface friction is neglected, while in the second case, the soil–penetrometer interface friction is taken into consideration. The constraint approach is used to model the soil–piezocone interface friction in which the Mohr–Coulomb frictional model is used to define the sliding potential. Analysis is done for three different soil specimens with different stress histories. The results of the numerical simulations are compared with the experimental measurements of the miniature piezocone penetration tests (PCPT) in cohesive soil specimens conducted in LSU calibration chambers. The resulting excess pore pressure distribution and its dissipation using the numerical model are compared with some available prediction methods. © 1998 John Wiley & Sons, Ltd. 相似文献
9.
《Computers and Geotechnics》2006,33(4-5):234-247
For shield-driven tunnels, the influence of the soil and grout material properties and of the cover depth on the surface settlements, the loading and deformation of the tunnel lining and the steering of the TBM is investigated numerically. To this end, comparative numerical simulations of a mechanised tunnel advance in homogeneous, overconsolidated, soft, cohesive soil below the ground water table are performed and sensitivities are evaluated. The advancement of the step-by-step tunnel construction process is modelled using a three-dimensional finite element model, which takes into account all relevant components of shield tunnelling. The material behaviour of the saturated soil and the tail void grout is modelled by a two-field finite element formulation in conjunction with an elasto-plastic Cam-Clay model for the soil and a hydration-dependent constitutive model for the grout. The analyses provide valuable information with regard to the significance of the investigated parameters and demonstrate the complexity of the various interactions in shield tunnelling. 相似文献
10.
盾构是土质隧道（洞）全断面开挖的高效、环保、安全、优质的地下工程施工机械,在国内城市地铁建设中已被广泛应用。盾构的始发掘进是盾构施工的关键技术之一,通过对盾构正常掘进和始发掘进的分析,引用土力学的基本原理,建立土压平衡盾构在这两种掘进模式下的力学模型,给出了土压平衡盾构在这两种掘进模式下的阻滞力矩计算公式,并对盾构正常掘进模式下阻滞力矩的构成和作用进行了分析。研究结果表明,正常掘进模式下,洞壁产生的阻滞力矩足以克服盾构刀盘刀具切削土体产生的反扭矩;而盾构在始发掘进时,必须在其托垫与其盾壳间采取防扭转措施。以在施工的某土压平衡盾构隧道工程为例,对所建立的公式进行了应用研究,取得了良好效果,可为土压平衡盾构的设计和应用提供参考。 相似文献
11.
利用有限元软件ABAQUS,采用对隧道洞室周边及开挖面的土体施加由盾构机引起的各种荷载的方法模拟天津市地铁1号线盾构施工。计算结果表明,有限元模型能够很好地模拟盾构施工过程。利用此模型研究隧道开挖对桩基础的影响。隧道开挖引起的桩顶沉降、桩身侧移主要发生在盾构机推进面逐渐接近桩的过程中,当盾构机推进面通过桩所在的位置后桩顶沉降、桩身侧移增加不明显;与隧道水平距离相同时,由于长桩能够充分发挥桩身下部的侧摩阻力,隧道开挖引起的长桩的桩顶沉降小于短桩的桩顶沉降;隧道开挖过程中12 m长桩的桩身发生了整体倾斜,16、19 m长桩的桩身出现了弯曲变形,16、19 m长桩的桩身最大弯矩发生在地面下12～13 m之间,即在隧道轴线附近;开挖过程中桩顶出现沿隧道推进方向的往复位移;桩顶作用的竖向荷载越大,由隧道开挖引起的桩顶沉降越大 相似文献
12.
The effect of tunneling on surrounding environments, especially on existing buried pipelines is a problem that engineers designing and practicing in urban geotechnical environments encounter more frequently than in the past. However, previous studies are usually based on the assumption that the soil is homogeneous. How to reflect soil stratification is the main focus for the problem of tunneling in multi‐layered soils. A displacement controlled coupling numerical method is presented for the displacement analysis of tunnel excavation below existing pipelines in multi‐layered soils. On the basis of the layered soil model, to consider the soil nonhomogeneous characteristic, the finite element method and boundary element method are coupled to simulate the deformation of existing pipelines induced by tunneling. The solutions indicate that good agreements are obtained between the proposed coupling numerical method and the commercial software. The accuracy of the proposed numerical method is better than the two stages method based on the existing closed‐form solutions. Moreover, the results discussed in this paper show that the error obtained by the previous method of weighted average on the basis of homogeneous half space converted from layered soils is not negligible for the obvious difference of elastic parameters among successive layers. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
盾构隧道掘进过程中将不可避免地穿越建筑结构密集区域,尤其是当穿越的建筑结构建造时间较长、基础较为薄弱,且地层变形超过特定极限时,建筑基础容易发生不均匀沉降和上部结构的额外变形。为了明确大直径泥水盾构隧道穿越复杂环境地层变形影响因素,更好掌握地层变形规律,本文以武汉地铁8号线黄浦路站—徐家棚站越江隧道工程为依托,运用大型通用有限元软件Plaxis3D建立三维有限元模型进行施工过程模拟,分别研究了覆土厚度、开挖面支护压力、盾壳段土体损失、盾尾注浆压力对地表沉降规律的敏感程度;并将数值模拟结果与现场实测值进行对比分析,结果发现有限元计算结果与实测结果具有较好的一致性,从而验证了数值模型的有效性。本文研究将为后续大直径泥水平衡盾构参数的选取提供方法指导。 相似文献
14.
盾构隧道施工土体扰动范围研究 总被引：1，自引：0，他引：1
盾构隧道施工,隧道周边土体应力场发生改变,临近隧道土体因应力扰动出现塑性区,塑性区的分布范围与注浆压力、注浆量等注浆参数密切相关。塑性区被认为是施工扰动比较严重的区域,为分析盾构施工扰动范围,基于小孔扩张理论研究了注浆压力、注浆量对土体扰动塑性区的影响,推导了塑性区与注浆压力和注浆量之间的函数关系。在定义扰动评价标准基础上,提出应用有限元计算盾构施工塑性区和扰动范围的一种简捷实用的数值方法。最后采用静力触探现场测试盾构施工扰动范围,并与理论公式及有限元方法进行比较,理论公式、有限元及现场测试三者取得了较为一致的结果,验证了推荐方法的有效性。其研究结果可对盾构施工注浆参数的正确选择提供理论支持。 相似文献
15.
Continuous velocity fields for collapse and blowout of a pressurized tunnel face in purely cohesive soil 总被引：1，自引：0，他引：1
Face stability analysis of tunnels excavated under pressurized shields is a major issue in real tunnelling projects. Most of the failure mechanisms used for the stability analysis of tunnels in purely cohesive soils were derived from rigid block failure mechanisms that were developed for frictional soils, by imposing a null friction angle. For a purely cohesive soil, this kind of mechanism is quite far from the actual velocity field. This paper aims at proposing two new continuous velocity fields for both collapse and blowout of an air‐pressurized tunnel face. These velocity fields are much more consistent with the actual failures observed in undrained clays. They are based on the normality condition, which states that any plastic deformation in a purely cohesive soil develops without any volume change. The numerical results have shown that the proposed velocity fields significantly improve the best existing bounds for collapse pressures and that their results compare reasonably well with the collapse and blowout pressures provided by a commercial finite difference software, for a much smaller computational cost. A design chart is provided for practical use in geotechnical engineering. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
16.
采用?800 mm模型土压盾构开展室内掘进试验,以探究砂卵石中土压盾构隧道掌子面失稳诱发地层变形特征。同时,补充开展三维离散元仿真以挖掘室内试验难以获取的掌子面失稳信息,并研究隧道埋深对掌子面稳定性的影响规律。研究结果表明：砂卵石地层中盾构隧道掌子面失稳发展到地表后,沉降曲面呈上大下小逐步收缩的沙漏状,影响范围小于砂土地层。考虑盾构动态掘进过程后,卵石颗粒接触关系变化十分剧烈,掌子面稳定性被削弱,极限支护压力随之增大。掌子面极限支护压力随隧道埋深基本呈线性增加,极限支护压力与初始支护压力之比则随埋深增大而减小。掌子面失稳机制可根据隧道埋深划分为3种模式。与既有研究相比,考虑了盾构动态掘进过程与实际工程更加接近,可为确保砂卵石地层土压盾构隧道施工掌子面稳定提供参考。 相似文献
17.
为明确盾构施工掌子面滑移破坏机制并确定掌子面支护力的合理范围,基于滑移线理论和极限分析上限定理,利用空间离散技术提出了一种盾构施工掌子面三维滑移破裂模型。依据大主应力拱理论计算滑移区顶部竖向土压力值,并以此作为滑移破坏区上部的竖向荷载计算掌子面极限支护力。研究表明,土拱效应显著影响掌子面前方土体竖向应力的大小及分布规律;将本模型与已有研究方法进行比较,验证了本模型获取的掌子面极限支护力极限分析上限解在黏性土地层以及摩擦土地层中的适用性。同时本模型构建的掌子面破坏区域形态更加贴近离心试验结果与数值计算结果。 相似文献
18.
Analysis of shield tunnel 总被引：1，自引：0，他引：1
This paper proposes a two‐dimensional finite element model for the analysis of shield tunnels by taking into account the construction process which is divided into four stages. The soil is assumed to behave as an elasto‐plastic medium whereas the shield is simulated by beam–joint discontinuous model in which curved beam elements and joint elements are used to model the segments and joints, respectively. As grout is usually injected to fill the gap between the lining and the soil, the property parameters of the grout are chosen in such a way that they can reflect the state of the grout at each stage. Furthermore, the contact condition between the soil and lining will change with the construction stage, and therefore, different stress‐releasing coefficients are used to account for the changes. To assess the accuracy that can be attained by the method in solving practical problems, the shield tunnelling in the No. 7 Subway Line Project in Osaka, Japan, is used as a case history for our study. The numerical results are compared with those measured in the field. The results presented in the paper show that the proposed numerical procedure can be used to effectively estimate the deformation, stresses and moments experienced by the surrounding soils and the concrete lining segments. The analysis and method presented in this paper can be considered to be useful for other subway construction projects involving shield tunnelling in soft soils. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
19.
以上海地铁11号线某区间盾构工程为背景,采用相似物理模型试验研究盾构隧道开挖对上方垂直于隧道轴线的地下管线的影响,并将试验结果与数值解对比。采用量纲分析法推导出文中模型试验的相似准则,并基于该相似准则设计出盾构机和隧道模型,分别通过管线刚度试验和模糊数学综合评判方法选定模型管线和配制相似土材料。研究结果表明,自主开发的半自动盾构掘进装置能较好地模拟盾构的开挖过程,较人工开挖扰动更小;下方盾构隧道开挖使管线产生的竖向变形关于隧道轴线呈对称分布,其形态符合高斯曲线的特征,最大竖向变形位于隧道轴线正上方处,竖向变形反弯点出现在与隧道轴线水平距离约一倍隧道直径的位置处;隧道开挖对管线的影响范围随管隧间距的增加而减小,管线竖向变形曲线的反弯点位置随管隧垂直间距的增大而有所内移;管线刚度对管线竖向变形的影响相对较小。 相似文献
20.
Coupled theory of mixtures for clayey soils 总被引：4，自引：0，他引：4
In this work, elasto-plastic coupled equations are formulated in order to describe the time-dependent deformation of saturated cohesive soils (two-phase state). Formulation of these equations is based on the principle of virtual work and the theory of mixtures for inelastic porous media. The theory of mixtures for a linear elastic porous skeleton was first developed by Biot (Theory of elasticity and consolidation for a porous anisotropic solid, Journal of Applied Physics, 1955, 26, 188–185). An extension of Biot's theory into a nonlinear inelastic media was performed by Prevost (Mechanics of continuous porous media, International Journal of Engineering Science, 1980, 18, 787–800). The saturated soil is considered as a mixture of two deformable media, the solid grains and the water. Each medium is regarded as a continuum and follows its own motion. The flow of pore-water through the voids is assumed to follow Darcy's law. The coupled equations are developed for large deformations with finite strains in an updated Lagrangian reference frame. The coupled behavior of the two-phase materials (soil-water state) is implemented in a finite element program. A modified Cam-clay model is adopted and implemented in the finite element program in order to describe the plastic behavior of clayey soils. Penetration of a piezocone penetrometer in soil is numerically simulated and implemented into a finite element program. The piezocone penetrometer is assumed to be infinitely stiff. The continuous penetration of the cone is simulated by applying an incremental vertical movement of the cone tip boundary. Results of the finite element numerical simulation are compared with experimental measurements conducted at Louisiana State University using the calibration chamber. The numerical simulation is carried out for two cases. In the first case, the interface friction between the soil and the piezocone penetrometer is neglected. In the second case, interface friction is assumed between the soil and the piezocone. The results of the numerical simulations are compared with experimental laboratory measurements. 相似文献