共查询到20条相似文献，搜索用时 187 毫秒
1.
《岩土力学》2019,(11)
采用最新配置的水泥砂浆材料,通过在试件中布置倾斜裂隙和水平裂隙,开展了单轴和双轴条件下的压缩试验,详细分析了不同加载条件下试件裂隙的扩展和贯通规律。试验结果表明:无裂隙内水压时,在单轴压缩条件下倾斜裂隙在扩展贯通水平裂隙后裂纹的扩展路径和方向发生明显改变,试样最终发生劈裂破坏。侧压的增大抑制了倾斜裂隙端部翼裂纹和次生裂纹的萌生,高侧压下翼裂纹没有贯穿水平裂隙,试样破坏模式变成了剪切破坏。水力耦合作用下,单轴压缩时倾斜裂隙翼裂纹尖端的最大主应力分布范围随着内水压的增大逐渐变小,翼裂纹的起裂应力、起裂角和峰值强度逐渐降低,试样发生劈裂破坏。通过数值模拟得到的裂纹扩展贯通规律与试验结果具有良好的一致性,开展了不同内水压时倾斜裂隙扩展贯通无水压的水平裂隙的数值分析,随着内水压的增加倾斜裂隙首先萌生共面裂纹随后产生翼裂纹,翼裂纹扩展贯通水平裂隙时扩展路径同样会发生改变。水力耦合作用下侧压也会抑制翼裂纹的萌生,随着内水压的增大减弱了侧压对倾斜裂隙翼裂纹的抑制作用。 相似文献
2.
为探究冻结岩石的宏观力学特性及损伤演化机理,对20、?5、?10 ℃红砂岩进行单轴加载CT实时扫描,获得各扫描层的CT扫描图像。利用Matlab自编程序生成灰度直方图和二值图像,基于CT数H值正比于密度的关系定义岩样扫描层的安全区、损伤区、破坏区,结合温度效应、水的软化作用及冰的冻胀力对岩样的影响,定量地研究冻结岩石的损伤破坏演化规律。试验研究表明,(1) 温度由20 ℃降至?5、?10 ℃时未冻水含量减少而冻结冰含量增加,岩样强度增大、抗变形能力提高、整体稳定性提高,CT图像呈现出岩样裂纹尺寸发展减慢、损坏程度减弱的规律;(2) 不同温度下岩石单轴加载的损伤演化经历了裂隙萌生、闭合、延伸、汇集及形成宏观主裂纹的阶段,岩样变形增大发生破坏;(3) 由于端部效应,中间较两端扫描层的损伤程度高,外侧较内侧扫描层先发生损伤,损伤边缘化并向内部扩展。 相似文献
3.
利用RMT-150B岩石力学多功能系统,对不同形态的含表观裂纹盐岩的力学特性进行试验研究,分析了表观裂纹对盐岩的强度和变形性能影响以及盐岩表观裂纹扩展及其贯通模式。表观裂纹扩展演化主要分两类:一类是试件初始表观裂纹扩展形成主裂纹;二类是试件初始表观裂纹闭合,而重新萌生微裂纹,聚集、扩展形成主裂纹,同时,附近伴随生长次生裂纹。表观裂纹盐岩的贯通模式主要表现为拉贯通和拉剪贯通,未呈现明显的压贯通等其他贯通模式;受自身结构致密性影响,裂纹贯通路径呈现明显的曲折线。竖向贯通裂纹对盐岩变形模量影响较大,而倾斜裂纹对盐岩变形模量影响相对较小。 相似文献
4.
考虑岩石介质的非均匀性,把爆破过程视为爆炸应力波和爆生气体压力共同作用的结果,基于损伤力学理论建立了岩石爆破的力学模型,并对不同地应力条件下岩石双孔爆破裂纹演化规律进行了数值模拟,分析了不同侧压力系数和埋 深对裂纹扩展规律的影响。数值模拟结果表明：①爆炸应力波导致裂纹的萌生,爆生气体压力则会使裂纹进一步扩展和贯通; ②裂纹演化过程与地应力密切相关,裂纹扩展的主方向趋于最大地应力方向;③随着埋深增加和初始地应力增大,裂纹扩展半径和裂纹区面积减小,地应力对爆破致裂的抑制作用明显。 相似文献
5.
《岩土力学》2017,(12):3635-3642
为了研究地表塌陷区回填体破坏过程中的孔隙结构演化规律,利用医用X-Ray CT及小型加载装置开展了废石/尾砂混合回填体实时单轴压缩扫描试验,重构了不同应力状态下回填体的多组分结构模型。试验结果表明:随应力值增大,回填体孔隙率增加,应力超过峰值应力80%后,孔隙率陡增,孔隙主要以X型共轭面分布;回填体孔隙率随含石量增加而增大;回填体细观结构演化过程可划分孔洞持续压密、孔洞先压密后扩容、孔洞持续扩容、相邻微裂隙的贯通、不均质区的孔隙扩展6种模式;回填体在峰值应力80%以前,CT数、孔隙率变化幅度小,回填体中并未出现显著的贯穿性裂缝,主要以原生孔隙的压缩与扩容、次生孔隙的萌生与扩展两种状态为主;应力超过峰值应力80%后,CT数急剧降低,孔隙率陡增,回填体中的原生、次生孔隙结构逐渐贯通,形成贯穿性裂缝,回填体破坏。 相似文献
6.
高水压下岩体裂纹扩展的渗流-断裂耦合机制与数值实现 总被引：1，自引：0，他引：1
采用渗流力学、断裂力学理论结合Monte Carlo方法描述岩体裂纹的随机分布,研究高水压作用下岩体原生裂纹的变形和翼形裂纹的萌生、扩展、贯通的渗流-断裂耦合作用机制,建立高水压作用下岩体裂纹的渗流-断裂耦合数学模型,给出该数学模型的求解策略与方法,在Fortran95平台下开发高水压下岩体裂纹扩展的渗流-断裂耦合分析程序HWFSC.for。高水压下岩体裂纹扩展的渗流-断裂耦合体现在岩体裂纹网络和渗流初始条件都随渗流时步变化。对高压注水岩体裂纹扩展过程进行渗流-断裂耦合分析。结果表明,高压注水条件下,岩体裂纹扩展存在起动水压力,当水压力大于起动水压力时,裂纹尖端开始萌生翼形裂纹,随着裂纹水压力的增加,翼形裂纹扩展,进而与其他裂纹搭接贯通,停止扩展。渗流-断裂耦合分析考虑了裂纹动、静水压力对裂纹产生的法向扩张效应及翼形裂纹的扩展而形成新的渗流通道两方面的影响,连通裂纹数随渗流的发展而增加。岩体裂纹的渗流-断裂耦合分析,能较真实地再现岩体裂纹的水力劈裂现象,描述岩体裂纹的扩展、贯通过程及与之相耦合的渗流响应。 相似文献
7.
爆炸应力波作用下分支裂纹动态力学特性试验 总被引：1，自引：0，他引：1
应用爆炸加载的透射式动焦散线测试系统,分析了平板中预制贯通裂纹在爆炸应力波作用下端部衍生分支裂纹及爆炸主裂纹的扩展规律。预制贯通裂纹面在压缩应力波及反射拉伸波作用下表现出明显的张开和闭合交替变化,预制贯通裂纹减弱了爆炸主裂纹的动态扩展行为,爆炸主裂纹难以穿过预制贯通裂纹继续扩展。分支裂纹是爆炸应力波在预制贯通裂纹端部衍射效应形成应力集中而衍生、起裂、扩展,其开裂角与预制贯通裂纹、爆炸应力波入射角密切相关,分支裂纹尖端沿着最大能量释放率方向起裂,逐渐平行于最大主应力的方向稳定扩展,中后期扩展多表现为复合型断裂。爆炸分支裂纹的动态应力强度因子、扩展速度低于爆炸主裂纹,获得了分支裂纹起裂韧度为0.50～0.65 MN/m3/2、止裂韧度为0.25～0.35 MN/m3/2。 相似文献
8.
岩石内部存在的裂隙、孔洞等天然损伤对岩石的力学性能和破坏过程有重要影响,依据细胞自动机理论结合CT无损识别技术实现了含天然裂隙岩石在劈裂条件下裂纹扩展和贯通全过程及其力学性能变化规律的研究。从裂隙砂岩的真实细观结构出发,构建了天然裂隙岩石的数值计算模型,运用CASRock数值计算软件完成了含不同裂隙倾角的砂岩劈裂破坏的数值试验,分析了裂隙倾角对砂岩的力学特性、裂纹扩展过程及能量演化的影响规律。研究表明：(1)天然裂隙砂岩的抗拉强度与裂隙倾角密切相关,随着裂隙倾角的增加,其抗拉强度呈现先减小后增加的趋势;(2)裂隙起裂于天然裂隙尖端,当裂隙倾角0°≤θ<48°时,岩样的破坏是由错开型裂纹引起,裂纹沿着与天然裂隙近垂直方向扩展;当裂隙倾角48°≤θ<94°时,岩样的破坏是由张开型裂纹引起,裂纹沿着与天然裂隙近平行方向扩展;(3)劈裂过程中裂纹尖端应力场存在拉应力区和压应力区,拉应力造成翼裂纹由天然裂隙尖端沿加载端方向萌生扩展,而压应力则引发次生裂纹沿天然裂隙方向扩展;(4)含天然裂隙砂岩劈裂破坏过程能量演化可划分为4个阶段,随裂隙倾角的增大,峰值点处的总能量密度、弹性能密度先缓... 相似文献
9.
为精准获得岩石I型裂纹扩展演化全过程,采用一种简易裂纹定向扩展装置开展了不同岩性试样裂纹扩展试验研究,借助声发射及数字散斑技术对裂纹扩展全过程进行了监测,建立了裂纹定向扩展力学模型,分析了裂纹扩展过程中声发射及变形场的演化规律,提出了评价岩石I型裂纹扩展难易程度的能量指标CE,探讨了I型裂纹定向起裂扩展机制。结果表明：该简易裂纹定向扩展装置能够有效实现I型裂纹沿预定方向稳定扩展,其起裂角均小于10º,同时通过简化力学模型计算得到白砂岩、灰砂岩的裂纹扩展峰值强度与巴西劈裂抗拉强度相比偏差分别为22.76%、7.53%;根据变形场演化规律,可将裂纹扩展分为微裂隙发育（散斑变形场分区不明显）、主控裂纹孕育（散斑变形场出现分区现象）和主控裂纹扩展3个阶段;声发射演化过程可分为平静期、缓增期、急增期和降低期4个阶段,由于灰砂岩相较于白砂岩质地更致密、更坚硬,导致其声发射平静期长,而后3个阶段持续时间短;将载荷−位移曲线峰前与峰后的面积之比定义为评价岩石I型裂纹扩展难易程度的能量指标CE,计算得到灰砂岩、白砂岩的CE分别为13～16、1～2,表明CE可有效评价岩石I型裂纹扩展难易程度;岩石I型裂纹起裂扩展机制可概况为：在加载峰值前裂隙尖端受最大拉应力作用,存储的弹性能快速增加、耗散能缓慢增加,但在加载峰值后裂隙尖端存储弹性能超过其储能极限迅速释放,此时输入能大部分转化为耗散能促进主控裂纹快速扩展。后续将对裂纹定向扩展试验装置进一步优化改进,以期为裂纹扩展机制、岩石破坏前兆信息、裂纹止裂原理等研究提供一种新方法,同时为工程现场煤岩层定向爆破、压裂、止裂等相关技术优化提供理论指导。 相似文献
10.
透明类岩石内置三维裂纹扩展变形试验研究 总被引：1，自引：0，他引：1
采用力学试验手段探究岩石受压情况下内部裂纹扩展贯通机制是了解岩石破坏失稳机制的重要手段。由于无法观察真实岩体内部裂纹扩展过程且CT扫描实时性不足等原因,自行研制了一种各项性质与岩石接近的透明类岩石材料,以观察研究其内部三维裂纹的扩展贯通机制。这一方法克服了真实岩体不透明的特点,可更方便地观察岩体内部裂纹萌生、扩展不同阶段的形状。然后制作了一批内置单裂隙和双裂隙的试件,在RMT-150B多功能全自动刚性岩石伺服试验机上进行单轴压缩试验,详细观察研究了单裂隙和双裂隙试件在不同岩桥角和裂隙间距情况下的裂纹扩展贯通模式以及裂隙数量和间距对试件抗压强度的影响,并从理论方面对翼形裂纹的扩展过程进行了解释。试验表明,在不同的岩桥角和裂隙间距下,次生裂纹将呈现不同的扩展贯通模式,试验中观察到的次生裂纹有张拉翼裂纹、与翼裂纹反向生长的反翼裂纹和拉剪作用下的花瓣状裂纹等,试件最终破坏是各种形式的裂纹汇合贯通的结果。裂隙的存在极大地降低了试件的抗压强度,且随着裂隙数目增加,试件峰值强度呈降低趋势,同时裂隙间距也对试件的峰值强度产生一定的影响。试验成果对分析真实岩体的破坏失稳机制有着重要的参考价值。 相似文献
11.
Crack evolution is initiated by the occurrence of tensile wing cracks and is then further promoted due to the crack coalescence caused by the extension of a central tensile crack segment between two relatively adjacent flaws. To understand such progressive failures in rock, a parallelized peridynamics coupled with a finite element method is utilized. Through this method, the initiation position of tensile wing cracks is observed with respect to varying inclination angles of a flaw, and then its corresponding shifting mechanism is investigated. In addition, the phenomenon of the position shifting being sensitive to various flaw shapes is discussed. Moreover, it is observed that the inclination angle of a central flaw affects the initiation position of other flaws; therefore, the initiation positions of tensile wing crack emanating from other neighboring flaws are analyzed with their angles. Following tensile wing cracks, a central tensile crack segment occurs in the bridging region between a central flaw and other neighboring flaws; the developmental patterns caused by the crack segment are discussed as well. Finally, the role a central tensile crack segment plays in the formation of crack coalescence and specimen failure is investigated in detail. The numerical results in this paper demonstrate good fidelity with established physical test results and complement them, thereby expanding the understanding of fracturing morphology in rock specimens with various flaws. 相似文献
12.
Cracking and coalescence behavior in a rectangular rock-like specimen containing two parallel (stepped and coplanar) pre-existing open flaws under uniaxial compression load has been numerically studied by a parallel bonded-particle model, which is a type of bonded-particle model. Crack initiation and propagation from two flaws replicate most of the phenomena observed in prior physical experiments, such as the type (tensile/shear) and the initiation stress of the first crack, as well as the coalescence pattern. Eight crack coalescence categories representing different crack types and trajectories are identified. New coalescence categories namely “New 1” and “New 2”, which are first observed in the present simulation, are incorporated into categories 3 and 4, and category 5 previously proposed by the MIT Rock Mechanics Research Group, respectively. The flaw inclination angle (β), the ligament length (L) (spacing between two flaws) and the bridging angle (α) (inclination of a line linking up the inner flaw tips, between two flaws) have different effects on the coalescence patterns, coalescence stresses (before, at or post the peak stress) as well as peak strength of specimens. Some insights on the coalescence processes, such as the initiation of cracks in the intact part of specimens at a distance away from the flaw tips, and coalescence due to the development and linkage of a number of steeply inclined to vertical macro-tensile cracks are revealed by the present numerical study. 相似文献
13.
脆性岩石材料在压应力作用下常出现两类裂纹：翼型张拉裂纹和次生剪切裂纹。近场动力学是一种新型的无网格数值计算方法。在近场动力学理论中,采用积分形式的控制方程代替微分形式的控制方程使得该数值算法在断裂问题上具有独特的优势。将Mohr-Coulomb准则和最大主应力准则引入非普通“态”基近场动力学理论中,分别用于模拟材料常见的压剪和张拉破坏。这种扩展的非普通“态”基近场动力学可以有效地模拟脆性岩石材料在多种受力状态下的裂纹起裂、扩展和连接问题。通过5个不同的数值算例说明该数值算法在处理脆性岩石材料断裂问题的有效性和准确性。首先,通过模拟含圆孔的弹性板拉伸数值试验说明该数值算法的有效性和准确性。其次,数值模拟了简单三点弯曲试验以及不使用其他外部准则条件下动荷载作用下裂纹的分叉试验,所得结果与其他试验结果或数值结果相吻合,从而验证了该理论的有效性。然后,模拟了包含斜裂纹的巴西圆盘试验,裂纹扩展路径和计算所得的断裂韧度同样吻合于试验结果。最后,模拟了单轴压缩状态下,预制裂纹试样的裂纹扩展和连接问题。将该数值算法与试验结果对比表明,所提出的数值方法可以模拟和预测岩石类材料的张拉和压剪裂纹的起裂、扩展和连接行为。 相似文献
14.
对预制交叉裂隙岩石试样进行裂纹扩展试验,研究了裂纹萌生、扩展、聚合过程,分析了主裂隙和轴向载荷夹角及主次裂隙夹角对裂纹起裂应力和聚合应力的影响,并用混合有限元-离散元程序,即图形处理器并行化的3D Y-HFDEM代码对试验进行了仿真计算,实现了岩石破坏从连续介质向非连续介质的过渡,对裂纹类及损伤破坏模式进行了识别,捕捉到了试验中难以发现的现象。研究表明：随主裂隙与轴向载荷夹角增加,裂纹聚合区的拉伸裂纹数量增加;裂纹起裂和聚合应力与主裂隙与轴向载荷夹角成正比;主次裂隙夹角增加,岩石的破坏模式由拉伸破坏转为剪切破坏,交叉裂隙加剧岩石破碎程度;主裂隙尖端萌生扩展的拉伸-剪切混合裂缝引起的破坏在岩石破坏中占主导地位,是导致岩体失去承载能力的主控裂纹;混合有限元-离散元仿真软件GPGPU并行化的3D Y-HFDEM IDE在岩石裂纹扩展研究中具有优势,可以捕捉实验室难以发现的损伤断裂类型,可以作为岩石裂纹扩展研究的有力工具。 相似文献
15.
An Experimental Study of Crack Coalescence Behaviour in Rock-Like Materials Containing Multiple Flaws Under Uniaxial Compression 总被引：4，自引：1，他引：3
Experiments on man-made flawed rock-like materials are applied extensively to study the mechanical behaviour of rock masses as well as crack initiation modes and crack coalescence types. A large number of experiments on specimens containing two or three pre-existing flaws were previously conducted. In the present work, experiments on rock-like materials (formed from a mixture of sand, plaster, limestone and water at mass ratio of 126:9:9:16) containing multiple flaws subjected to uniaxial compression were conducted to further research the effects of the layout of pre-existing flaws on mechanical properties, crack initiation modes and crack coalescence types. Compared with previous experiments in which only three types of cracks were found, the present experiments on specimens containing multiple flaws under uniaxial compression revealed five types of cracks, including wing cracks, quasi-coplanar secondary cracks, oblique secondary cracks, out-of-plane tensile cracks and out-of-plane shear cracks. Ten types of crack coalescence occurred through linkage among wing cracks, quasi-coplanar secondary cracks, oblique secondary cracks, out-of-plane shear cracks and out-of-plane tensile cracks. Moreover, the effects of the non-overlapping length and flaw angle on the complete stress–strain curves, the stress of crack initiation, the peak strength, the peak strain and the elastic modulus were also investigated in detail. 相似文献
16.
X-ray computed tomography (CT) imaging and digital image correlation techniques are applied to study spatial cracking behaviors of sandstone under uniaxial compression, in which the angle between precracks is 45°, 90°, and 135° and the crack depth is 7.5 mm and 10 mm, respectively. Layered anisotropy damages and spatial cracking evolution are quantitatively analyzed by the defined digital layered anisotropy index and digital damage ratio, respectively. Three cases with different array of precracks evidence the depth effects of precracks on spatial crack propagation. Results show that the failure process of samples is first controlled by the coalescence of surface cracks in 2D space and then the samples are failed by the propagation of coalesced cracks (shear cracks with different shapes). The crack types for samples with precrack depth of 7.5 mm are all shear cracks for Cases 1‑3. Nevertheless, the crack types for samples with precrack depth of 10 mm are, respectively, the half X-shape crack for Case 1, X-shape crack for Case 2, and double shell crack for Case 3. The precrack has a significant promotion effect on the failure process when the angle between the two precracks is β = 90°, and the precrack has little to no effect on the failure process when the angle between the two precracks is β = 135°. As the depth of precrack increases to 10 mm, the crack types are changed in this study. The peak strength of sample subjected to uniaxial compression decreases with increasing depth of precracks, implying the decrease of the rock strength by the discontinuity. 相似文献
17.
Lekan Olatayo Afolagboye Jianming He Sijing Wang 《Geotechnical and Geological Engineering》2018,36(1):105-133
Crack initiation and coalescence behavior of rock or rock-like specimens containing artificial flaws under uniaxial compression have been subjects of intensive investigation in the past. Most of these investigations however focused on crack initiation and coalescence between two or more parallel flaws. Although there have been few experimental studies on non-parallel flaws, these studies did not address the influence of geometrical factors such as ligament length and ligament angle on the crack initiation and coalescence behavior of non-parallel flaws. To investigate whether the individual geometrical factors have similar effects on the crack initiation and coalescence behavior of both parallel and non-parallel flaws, we conducted uniaxial compression tests to investigate crack cracking and coalescence processes in rock like material containing two non-parallel flaws. The paper presents the influence of individual geometrical factors on the crack initiation process and coalescence pattern of non-parallel flaws. Initiation of primary first cracks from all the tips of the two flaws did not occur simultaneously in all the flaw configurations. The flaw configuration of the non-parallel flaws influences the crack initiation, crack trajectories and coalescence behavior. The crack coalescence pattern changes with an increasing ligament angle from indirect to shear crack or mixed tensile-shear crack to tensile crack coalescence. The chance of direct coalescence is reduced with an increase in ligament length. In conclusion, the crack initiation and coalescence behavior of prismatic rock-like specimens with non-parallel flaws, as influenced by the geometrical factors, are analogous to the cracking and coalescence pattern observed in specimens with parallel flaws. 相似文献
18.
为了研究运动裂纹与圆形孔缺陷的相互作用机制,采用数字激光动态焦散线方法进行了含圆形孔缺陷的冲击试验。结果表明：在冲击载荷下,I型运动裂纹在与圆形孔贯通前,断裂面光滑,扩展路径平直;运动裂纹从圆形孔上端起裂后,断裂面凹凸不平,扩展路径也更为弯曲。当运动裂纹朝向邻近的圆形孔扩展时,圆形孔对运动裂纹的扩展速度和动态应力强度因子有抑制作用,且随着圆形孔直径的增大,这种抑制作用不断增强。当运动裂纹与圆形孔缺陷汇聚后,圆形孔阻碍了裂纹的继续扩展,裂纹尖端被钝化,钝裂纹的起裂韧度较尖裂纹提高9.58%～13.87%,裂纹再次起裂时的扩展速度和动态应力强度因子存在明显的跳跃,表明钝裂纹更难起裂,需要消耗的能量更多。 相似文献
19.
利用RMT–150C岩石力学测试系统,对重庆彭水含天然裂隙脆性页岩在单轴循环荷载作用下的变形及破裂特征进行了试验研究。研究结果表明：（1）在循环加卸载和裂隙的共同影响下页岩所含天然裂隙使页岩性质局部劣化、加剧裂隙扩展和破坏提前,导致屈服应力、破裂压力和峰值强度等减小,其中峰值强度降低了13.7%～58.3%;（2）轴向应变形成封闭的“尖叶”状滞回环,并呈疏-密-疏排列,而横向应变形成上开口“8”字形滞回环,并呈密-疏排列,横向应变-循环次数曲线可分为初始变形阶段、小速率等速变形阶段、大速率等速变形阶段和失稳破坏阶段等四阶段演化规律,前期横向应变突变现象可作为天然裂隙和新裂隙扩展、交汇完成,进入大速率等速变形阶段的标志,后期突变可作为整体失稳破坏的前兆;（3）含天然裂隙页岩的破坏模式主要呈拉剪贯通模式和拉贯通模式,两种贯通模式均至少包含一条贯通天然裂隙的拉裂隙;（4）在弹性阶段,有效弹性模量与损伤面积系数呈线性关系,损伤面积系数越大,有效弹性模量越小;（5）在低应力水平内循环,不可逆变形缓慢增加,轴向应变-循环次数曲线始终处于初始变形阶段,试样不发生破坏;在高应力水平内循环,经历3个变形阶段后试样发生破坏;在接近峰值应力的应力水平内循环,曲线直接进入加速变形阶段,几次循环后试样发生破坏。该研究为认清页岩的裂隙扩展形成复杂裂隙网的发展机制提供了有益参考。 相似文献
20.
三叉裂隙是自然界普遍存在的一种岩体缺陷形式,其对岩体的力学特性有重要影响。对含预制三叉裂隙的水泥砂浆试样进行室内单轴压缩试验,配合使用摄像机拍摄裂纹的起裂、扩展、贯通过程,通过数字图像技术处理获取试样的应变场云图,并结合PFC2D程序研究不同?、? 条件下试样的强度特征、裂纹模式和裂纹演化扩展规律。研究表明：三叉裂隙对试样单轴抗压强度有明显的削弱作用。当? 恒定为120°时,试样在? = 30°时达到最大抗压强度;当? 恒定为90°时,随?增大,试样抗压强度呈先减小后增大的趋势,且当? = 45°时达到最大抗压强度。试样产生的裂纹可分为3类,分别是张拉型裂纹(Ⅰ型裂纹)、剪切型裂纹(Ⅱ型裂纹)、混合型裂纹(Ⅲ型裂纹)。这3类裂纹通常从裂隙尖端开始产生,并且Ⅰ型裂纹沿加载方向扩展,通常未扩展至试样边界;Ⅱ型和Ⅲ型裂纹通常与加载方向呈一定角度扩展至试样边界。通过对裂纹的几何形态和组成宏观裂纹的微裂纹成分的分析,得知导致含三叉裂隙试样在单轴压缩条件下失效的是张拉破坏。数字图像技术得到的应变云图表明,当载荷达到一定阶段,裂隙尖端出现应力集中,微破裂开始发育并聚集成微破裂区,微破裂区扩大产生宏观裂纹。通过对主应变和剪应变云图分析,发现导致试样失效的是张拉破坏,剪应变在裂纹扩展过程中的影响较小。 相似文献