首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
The Huai Kham On gold deposit is located in the central part of the Sukhothai Fold Belt, northern Thailand. The Sukhothai Fold Belt represents an accretionary complex formed by subduction and collision between the Indochina and Sibumasu Terranes. There are many small gold deposits in the Sukhothai Fold Belt; however, the styles and formation environments of those gold deposits are not clear. The geology of the Huai Kham On deposit consists of volcanic and volcanosedimentary rocks, limestone, and low‐grade metamorphic rocks of Carboniferous to Triassic age. Gold‐bearing quartz veins are hosted by volcanic and volcanosedimentary rocks. The quartz veins can be divided into four stages. The mineral assemblage of the gold‐bearing quartz veins of Stages I and II comprises quartz, calcite, illite, pyrite, native gold, galena, chalcopyrite, and sphalerite. Quartz veins of Stage III consist of microcrystalline quartz, dolomite, calcite, pyrite, native gold, and chalcopyrite. Veins of Stage IV consist of calcite, dolomite, chlorite, and quartz. Fluid inclusions in quartz veins are classified into liquid‐rich two‐phase (Types IA and IB), carbonic‐aqueous (Type II), and carbonic (Type III) fluid inclusions. The homogenization temperatures of Types IA and II fluid inclusions that are related to the gold‐bearing quartz veins from Stages I to III ranged from 240° to 280°C. The δ18O values of quartz veins of Stages I to III range from +12.9 to +13.4‰, suggesting the presence of a homogeneous hydrothermal solution without temperature variation such as a decrease of temperature during the formation of gold‐bearing quartz veins from Stages I to III in the Huai Kham On gold deposit. Based on the calculated formation temperature of 280°C, the δ18O values of the hydrothermal solution that formed the gold‐bearing quartz veins range from +3.2 to +3.7‰, which falls into the range of metamorphic waters. The gold‐bearing quartz veins of the Huai Kham On deposit are interpreted to be the products of metamorphic water.  相似文献   

2.
The Asachinskoe epithermal Au‐Ag deposit is a representative low‐sulfidation type of deposit in Kamchatka, Russia. In the Asachinskoe deposit there are approximately 40 mineralized veins mainly hosted by dacite–andesite stock intrusions of Miocene–Pliocene age. The veins are emplaced in tensional cracks with a north orientation. Wall‐rock alteration at the bonanza level (170–200 m a.s.l.) consists of the mineral assemblage of quartz, pyrite, albite, illite and trace amounts of smectite. Mineralized veins are well banded with quartz, adularia and minor illite. Mineralization stages in the main zone are divided into stages I–IV. Stage I is relatively barren quartz–adularia association formed at 4.7 ± 0.2 Ma (K‐Ar age). Stage II consists of abundant illite, Cu‐bearing cryptomelane and other manganese oxides and hydroxides, electrum, argentite, quartz, adularia and minor rhodochrosite and calcite. Stage III, the main stage of gold mineralization (4.5–4.4 ± 0.1–3.1 ± 0.1 Ma, K‐Ar age), consists of a large amount of electrum, naumannite and Se‐bearing polybasite with quartz–adularia association. Stage IV is characterized by hydrothermal breccia, where electrum, tetrahedrite and secondary covellite occur with quartz, adularia and illite. The concentration of Au+Ag in ores has a positive correlation with the content of K2O + Al2O3, which is controlled by the presence of adularia and minor illite, and both Hg and Au also have positive correlations with the light rare‐earth elements. Fluid inclusion studies indicate a salinity of 1.0–2.6 wt% NaCl equivalent for the whole deposit, and ore‐forming temperatures are estimated as approximately 160–190°C in stage III of the present 218 m a.s.l. and 170–180°C in stage IV of 200 m a.s.l. The depth of ore formation is estimated to be 90–400 m from the paleo‐water table for stage IV of 200 m a.s.l., if a hydrostatic condition is assumed. An increase of salinity (>CNaCl≈ 0.2 wt%) and decrease of temperature (>T ≈ 30°C) within a 115‐m vertical interval for the ascending hydrothermal solution is calculated, which is interpreted as due to steam loss during fluid boiling. Ranges of selenium and sulfur fugacities are estimated to be logfSe2 = ?17 to ?14.5 and logfS2 = ?15 to ?12 for the ore‐forming solution that was responsible for Au‐Ag‐Se precipitation in stage III of 200 m a.s.l. Separation of Se from S‐Se complex in the solution and its partition into selenides could be due to a relatively oxidizing condition. The precipitation of Au‐Ag‐Se was caused by boiling in stage III, and the precipitation of Au‐Ag‐Cu was caused by sudden decompression and boiling in stage IV.  相似文献   

3.
Mineralogic studies of major ore minerals and fluid inclusion analysis in gangue quartz were carried out for the for the two largest veins, the Aginskoe and Surprise, in the Late Miocene Aginskoe Au–Ag–Te deposit in central Kamchatka, Russia. The veins consist of quartz–adularia–calcite gangue, which are hosted by Late Miocene andesitic and basaltic rocks of the Alnei Formation. The major ore minerals in these veins are native gold, altaite, petzite, hessite, calaverite, sphalerite, and chalcopyrite. Minor and trace minerals are pyrite, galena, and acanthine. Primary gold occurs as free grains, inclusions in sulfides, and constituent in tellurides. Secondary gold is present in form of native mustard gold that usually occur in Fe‐hydroxides and accumulates on the decomposed primary Au‐bearing tellurides such as calaverite, krennerite, and sylvanite. K–Ar dating on vein adularia yielded age of mineralization 7.1–6.9 Ma. Mineralization of the deposit is divided into barren massive quartz (stage I), Au–Ag–Te mineralization occurring in quartz‐adularia‐clays banded ore (Stage II), intensive brecciation (Stage III), post‐ore coarse amethyst (Stage IV), carbonate (Stage V), and supergene stages (Stage VI). In the supergene stage various secondary minerals, including rare bilibinskite, bogdanovite, bessmertnovite metallic alloys, secondary gold, and various oxides, formed under intensely oxidized conditions. Despite heavy oxidation of the ores in the deposit, Te and S fugacities are estimated as Stage II tellurides precipitated at the log f Te2 values ?9 and at log fS2 ?13 based on the chemical compositions of hypogene tellurides and sphalerite. Homogenization temperature of fluid inclusions in quartz broadly ranges from 200 to 300°C. Ore texture, fluid inclusions, gangue, and vein mineral assemblages indicate that the Aginskoe deposit is a low‐sulfidation (quartz–adularia–sericite) vein system.  相似文献   

4.
The Kay Tanda epithermal Au deposit in Lobo, Batangas is one of the Au deposits situated in the Batangas Mineral District in southern Luzon, Philippines. This study aims to document the geological, alteration, and mineralization characteristics and to determine the age of the mineralization, the mechanism of ore deposition, and the hydrothermal fluid characteristics of the Kay Tanda deposit. The geology of Kay Tanda consists of (i) the Talahib Volcanic Sequence, a Middle Miocene dacitic to andesitic volcaniclastic sequence that served as the host rock of the mineralization; (ii) the Balibago Diorite Complex, a cogenetic intrusive complex intruding the Talahib Volcanic Sequence; (iii) the Calatagan Formation, a Late Miocene to Early Pliocene volcanosedimentary formation unconformably overlying the Talahib Volcanic Sequence; (iv) the Dacite Porphyry Intrusives, which intruded the older lithological units; and (v) the Balibago Andesite, a Pliocene postmineralization volcaniclastic unit. K‐Ar dating on illite collected from the alteration haloes around quartz veins demonstrated that the age of mineralization is around 5.9 ± 0.2 to 5.5 ± 0.2 Ma (Late Miocene). Two main styles of mineralization are identified in Kay Tanda. The first style is an early‐stage extensive epithermal mineralization characterized by stratabound Au‐Ag‐bearing quartz stockworks hosted at the shallower levels of the Talahib Volcanic Sequence. The second style is a late‐stage base metal (Zn, Pb, and Cu) epithermal mineralization with local bonanza‐grade Au mineralization hosted in veins and hydrothermal breccias that are intersected at deeper levels of the Talahib Volcanic Sequence and at the shallower levels of the Balibago Intrusive Complex. Paragenetic studies on the mineralization in Kay Tanda defined six stages of mineralization; the first two belong to the first mineralization style, while the last four belong to the second mineralization style. Stage 1 is composed of quartz ± pyrophyllite ± dickite/kaolinite ± diaspore alteration, which is cut by quartz veins. Stage 2 is composed of Au‐Ag‐bearing quartz stockworks associated with pervasive illite ± quartz ± smectite ± kaolinite alteration. Stage 3 is composed of carbonate veins with minor base metal sulfides. Stage 4 is composed of quartz ± adularia ± calcite veins and hydrothermal breccias, hosting the main base metal and bonanza‐grade Au mineralization, and is associated with chlorite‐illite‐quartz alteration. Stage 5 is composed of epidote‐carbonate veins associated with epidote‐calcite‐chlorite alteration. Stage 6 is composed of anhydrite‐gypsum veins with minor base metal mineralization. The alteration assemblage of the deposit evolved from an acidic mineral assemblage caused by the condensation of magmatic volatiles from the Balibago Intrusive Complex into the groundwater to a slightly acidic mineral assemblage caused by the interaction of the host rocks and the circulating hydrothermal waters being heated up by the Dacite Porphyry Intrusives to a near‐neutral pH toward the later parts of the mineralization. Fluid inclusion microthermometry indicates that the temperature of the system started to increase during Stage 1 (T = 220–250°C) and remained at high temperatures (T = 250–290°C) toward Stage 6 due to the continuous intrusion of Dacite Porphyry Intrusives at depth. Salinity slightly decreased toward the later stages due to the contribution of more meteoric waters into the hydrothermal system. Boiling is considered the main mechanism of ore deposition based on the occurrence of rhombic adularia, the heterogeneous trapping of fluid inclusions of variable liquid–vapor ratios, the distribution of homogenization temperatures, and the gas ratios obtained from the quantitative fluid inclusion gas analysis of quartz. Ore mineral assemblage and sulfur fugacity determined from the FeS content of sphalerite at temperatures estimated by fluid inclusion microthermometry indicate that the base metal mineralization at Kay Tanda evolved from a high sulfidation to an intermediate sulfidation condition.  相似文献   

5.
Abstract. Mineral assemblage, precipitation sequence and textures of the gold‐bearing veins from the Hishikari epithermal vein‐type deposits, southern Kyushu, Japan, were examined. In addition, fluid inclusion microthermometry and carbon and oxygen isotopic compositions of calcite were determined. Calcite, and that replaced by quartz, were commonly observed throughout the precipitation sequence of the veins. Thus, calcite must be a more common gangue constituent initially than observed presently. Association of calcite and electrum is observed immediately subsequent to columnar adularia in some vein samples. In addition, close association of electrum with pseudo‐acicular quartz, and electrum with truscottite were observed. The initial coprecipitation of electrum and calcite might be a common phenomenon in the gold‐bearing veins at the Hishikari deposits. The Th (homogenization temperature) data from the Honko‐Sanjin deposits are generally higher than those from the Yamada deposit. Samples that show association of calcite and electrum yielded higher Th (206–217°C, average) than the Th data from calcite associated with low‐grade Au ore or barren (180–204°C, average). The measured Tm (temperature of last melting point of ice) range from ‐0.4 to 0.0°C. The result suggests that the salinity of the hydrothermal solution was low during the precipitation both of calcite associated with Au mineralization and of barren calcite. Fluid inclusion evidence suggestive of boiling of hydrothermal solution for the precipitation of calcite was not recognized in the present work. The δ13C and δ18O values of calcite range from ‐10.8 to —4.7 % and from +3.2 to +15.2 %, respectively. The δ13C value of H2CO3 and the δ18O value of H2O in the hydrothermal fluids calculated assuming isotopic equilibrium with calcite using the temperature obtained by fluid inclusion microthermometry, range from ‐14.4 to ‐9.1 %, and from ‐6.2 to +5.5 %, respectively. Thus, the calculated δ18O values of H2O for calcite further confirm the presence of the 18O‐enriched ore fluids during the mineralization at the Hishikari deposits. The hydrothermal solution isotopically equilibrated with the sedimentary basement rocks was responsible for the gold mineralization associated with calcite.  相似文献   

6.
《Resource Geology》2018,68(1):83-92
Cu–Mo mineralization occurs in southern part of the Chatree Au–Ag deposit, central Thailand. Quartz veins of Cu–Mo mineralization are divided into five types: Types A, B, C, D and E. Quartz veins of Types A, B and C are hosted in altered granodiorite porphyry, and quartz veins of Types D and E occur in altered andesite lava. Mineral assemblages of Types A, B and C quartz veins are composed of qz–chl–ilt–mol–py–ccp, qz–chl–ilt–ccp–py and qz–chl–ilt–ccp–py–sp–po, respectively. Types D and E quartz veins consist of qz–chl–py–ccp–sp–po and qz–ep, respectively. Fluid inclusions of quartz veins are divided into liquid‐rich two‐phases fluid inclusion, vapor‐rich two‐phases fluid inclusion and multiphase solid‐bearing fluid inclusion. Coexistence of a halite‐bearing fluid inclusion having salinity of 37 equiv. wt.% NaCl and a vapor‐rich two‐phases fluid inclusion having salinity of 1 equiv. wt.% NaCl suggests that the Cu–Mo‐bearing quartz veins were formed at temperature of 450°C and pressure of 250 bars (depth of approximately 1.5 km from the paleosurface). Based on the formation temperature of 450°C of quartz veins and the δ18O values of quartz of the quartz veins, the δ18O value of fluid responsible for the Cu–Mo‐bearing quartz vein is estimated to be +9.9‰. The origin of fluid forming the Cu–Mo‐bearing quartz veins in the N prospect of the Chatree mining area would be magmatic water. Based on the characteristics of geology, age, mineral assemblage and the formation environment, Cu–Mo mineralization would be different from the epithermal Au–Ag mineralization of the Chatree mining area.  相似文献   

7.
Detailed hydrothermal alteration investigations, including petrography, infrared reflectance spectroscopy (IRS) and XRD of the low sulfidation epithermal Co–O mine, located in Eastern Mindanao (Philippines) revealed that both distal and intermediate hydrothermal alteration zones contain dominantly illite and chlorite, whereas the proximal alteration zone comprises mainly illite, chalcopyrite and pyrite. The gold-bearing veins and the proximal hydrothermal alteration zone display a distinct absence of K-rich hydrothermal alteration minerals such as K-feldspar (adularia).Gold mineralization in the Co–O mine is controlled by an extensive quartz-breccia vein system, which is characterized by three distinct stages of vein (incl. breccias) formation. Gold is mainly observed in stages 2 and 3 veins. Stage 1 veins appear as fragments in stage 2 veins and display boiling textures such as quartz pseudomophs after bladed calcite. These veins further display colloform to crustiform banding and contain pyrite, chalcopyrite and minor gold located in the colloform bands and between bladed quartz pseudomorphs. Stage 2 veins comprise mostly banded to massive quartz and contains sulfides parallel to bands or disseminated. These veins are fine-grained with mosaic/jigsaw quartz and contain calcite blebs and/or fragments of stage 1 veins. Gold is in textural equilibrium with chalcopyrite, sphalerite, and locally pyrite. Stage 3 veins consist of quartz and carbonate (locally Mn-rich), and display irregular banded and comb textures. In auriferous veins of this stage gold is in textural equilibrium with chalcopyrite and pyrite (with local abundance of sphalerite). Other sulfide minerals observed with gold in stages 2 and 3 are galena, acanthite and locally jalpaite.The XRD and IRS provide inconsistent results regarding the abundance of K-rich clays (e.g., illite) associated with auriferous veins. Illite, with possibly interlayered swelling clays, such as Al-smectite, was identified in auriferous vein stages 2 and 3 using IRS, but could not be confirmed by XRD. Comparative analysis of the results of these techniques with respect to the ordering of micaceous minerals, suggest less ordered white mica proximal to the veins.Vein textures such as banded quartz, the absence of K-feldspar and the abundance of illite (interlayered Al-smectite) suggest relatively low temperatures of formation of the hydrothermal alteration system and point to a potential boiling horizon located deeper or marginal to the currently exploited levels of the Co–O mine. The absence of K-feldspar may also be related to relatively low temperatures of the hydrothermal fluid, the medium potassium-rich magma series of the host rocks, and/or a relatively low oxidation state of the hydrothermal fluid.  相似文献   

8.
The vein system in the Arinem area is a gold‐silver‐base metal deposit of Late Miocene (8.8–9.4 Ma) age located in the southwestern part of Java Island, Indonesia. The mineralization in the area is represented by the Arinem vein with a total length of about 5900 m, with a vertical extent up to 575 m, with other associated veins such as Bantarhuni and Halimun. The Arinem vein is hosted by andesitic tuff, breccia, and lava of the Oligocene–Middle Miocene Jampang Formation (23–11.6 Ma) and overlain unconformably by Pliocene–Pleistocene volcanic rocks composed of andesitic‐basaltic tuff, tuff breccia and lavas. The inferred reserve is approximately 2 million tons at 5.7 g t?1 gold and 41.5 g t?1 silver at a cut‐off of 4 g t?1 Au, which equates to approximately 12.5t of Au and 91.4t of Ag. The ore mineral assemblage of the Arinem vein consists of sphalerite, galena, chalcopyrite, pyrite, marcasite, and arsenopyrite with small amounts of pyrrhotite, argentite, electrum, bornite, hessite, tetradymite, altaite, petzite, stutzite, hematite, enargite, tennantite, chalcocite, and covellite. These ore minerals occur in quartz with colloform, crustiform, comb, vuggy, massive, brecciated, bladed and calcedonic textures and sulfide veins. A pervasive quartz–illite–pyrite alteration zone encloses the quartz and sulfide veins and is associated with veinlets of quartz–calcite–pyrite. This alteration zone is enveloped by smectite–illite–kaolinite–quartz–pyrite alteration, which grades into a chlorite–smectite–kaolinite–calcite–pyrite zone. Early stage mineralization (stage I) of vuggy–massive–banded crystalline quartz‐sulfide was followed by middle stage (stage II) of banded–brecciated–massive sulfide‐quartz and then by last stage (stage III) of massive‐crystalline barren quartz. The temperature of the mineralization, estimated from fluid inclusion microthermometry in quartz ranges from 157 to 325°C, whereas the temperatures indicated by fluid inclusions from sphalerite and calcite range from 153 to 218 and 140 to 217°C, respectively. The mineralizing fluid is dilute, with a salinity <4.3 wt% NaCl equiv. The ore‐mineral assemblage and paragenesis of the Arinem vein is characteristically of a low sulfidation epithermal system with indication of high sulfidation overprinted at stage II. Boiling is probably the main control for the gold solubility and precipitation of gold occurred during cooling in stage I mineralization.  相似文献   

9.
Hydrothermal alteration, involving chiefly chlorite and illite, is extensively distributed within host rocks of the Pleistocene Hishikari Lower Andesites (HLA) and the Cretaceous Shimanto Supergroup (SSG) in the underground mining area of the Hishikari epithermal gold deposit, Kagoshima, Japan. Approximately 60% of the mineable auriferous quartz‐adularia veins in the Honko vein system occur in sedimentary rocks of the SSG, whereas all the veins of the Yamada vein system occur in volcanic rocks of the HLA. Variations in the abundance and chemical composition of hydrothermal minerals and magnetic susceptibility of the hydrothermally altered rocks of the HLA and SSG were analyzed. In volcanic rocks of the HLA, hydrothermal minerals such as quartz, chlorite, adularia, illite, and pyrite replaced primary minerals. The amount of hydrothermal minerals in the volcanic rocks including chlorite, adularia, illite, and pyrite as well as the altered and/or replaced pyroxenes and plagioclase phenocrysts increases toward the veins in the Honko vein system. The vein‐centered variation in mineral assemblage is pronounced within up to 25 m from the veins in the peripheral area of the Honko vein system, whereas it is not as apparent in the Yamada vein system. The hydrothermal minerals in sandstone of the SSG occur mainly as seams less than a few millimeters thick and are sporadically observed in halos along the veins and/or the seams. The alteration halos in sandstone of the SSG are restricted to within 1 m of the veins. In the peripheral area of the Honko vein system, chlorite in volcanic rocks is characterized by increasing in Al in its tetrahedral layer and the Fe/Fe + Mg ratio toward the veins, while illite in volcanic rocks has relatively low K and a restricted range of Fe/Fe + Mg ratios. Temperature estimates derived from chlorite geothermometry rise toward the veins within the volcanic rocks. The magnetic susceptibility of tuff breccia of the HLA varies from 21 to less than 0.01 × 10?3 SI within a span of 40 m from the veins and has significant variation relative to that of andesite (27–0.06 × 10?3 SI). The variation peripheral to the Honko vein system correlates with an increase in the abundance of hematite pseudomorphs after magnetite, the percentage of adularia and chlorite with high Fe/Fe + Mg ratios, and the degree of plagioclase alteration with decreasing distance to the veins. In contrast, sedimentary rocks of the SSG maintain a consistent magnetic susceptibility across the alteration zone, within a narrow range from 0.3 to 0.2 × 10?3 SI. Magnetic susceptibility of volcanic rocks of the HLA, especially tuff breccia, could serve as an effective exploration tool for identifying altered volcanic rocks.  相似文献   

10.
Ore mineralization and wall rock alteration of Crater Mountain gold deposit, Papua New Guinea, were investigated using ore and host rock samples from drill holes for ore and alteration mineralogical study. The host rocks of the deposit are quartz‐feldspar porphyry, feldspar‐hornblende porphyry, andesitic volcanics and pyroclastics, and basaltic‐andesitic tuff. The main ore minerals are pyrite, sphalerite, galena, chalcopyrite and moderate amounts of tetrahedrite, tennantite, pyrrhotite, bornite and enargite. Small amounts of enargite, tetradymite, altaite, heyrovskyite, bismuthinite, bornite, idaite, cubanite, native gold, CuPbS2, an unidentified Bi‐Te‐S mineral and argentopyrite occur as inclusions mainly in pyrite veins and grains. Native gold occurs significantly in the As‐rich pyrite veins in volcanic units, and coexists with Bi‐Te‐S mineral species and rarely with chalcopyrite and cubanite relics. Four mineralization stages were recognized based on the observations of ore textures. Stage I is characterized by quartz‐sericite‐calcite alteration with trace pyrite and chalcopyrite in the monomict diatreme breccias; Stage II is defined by the crystallization of pyrite and by weak quartz‐chlorite‐sericite‐calcite alteration; Stage III is a major ore formation episode where sulfides deposited as disseminated grains and veins that host native gold, and is divided into three sub‐stages; Stage IV is characterized by predominant carbonitization. Gold mineralization occurred in the sub‐stages 2 and 3 in Stage III. The fS2 is considered to have decreased from ～10?2 to 10?14 atm with decreasing temperature of fluid.  相似文献   

11.
The Bianbianshan deposit, the unique gold-polymetal (Au-Ag-Cu-Pb-Zn) veined deposit of the polymetal metallogenic belt of the southern segment of Da Hinggan Mountains mineral province, is located at the southern part of the Hercynian fold belt of the south segment of Da Hinggan Mountains mineral province, NE China. Ores at the Bianbianshan deposit occur within Cretaceous andesite and rhyolite in the form of gold-bearing quartz veins and veinlet groups containing native gold, electrum, pyrite, chalcopyrite, galena and sphalerite. The deposit is hosted by structurally controlled faults associated with intense hydrothermal alteration. The typical alteration assemblage is sericite + chlorite + calcite + quartz, with an inner pyrite - sericite - quartz zone and an outer seicite - chlorite - calcite - epidote zone between orebodies and wall rocks. δ34 S values of 17 sulfides from ores changing from –1.67 to +0.49‰ with average of –0.49‰, are similar to δ34 S values of magmatic or igneous sulfide sulfur. 206Pb/204Pb, 207Pb/204Pb and 208Pb/ 204Pb data of sulfide from ores range within 17.66–17.75, 15.50–15.60, and 37.64–38.00, respectively. These sulfur and lead isotope compositions imply that ore-forming materials might mainly originate from deep sources. H and O isotope study of quartz from ore-bearing veins indicate a mixed source of deep-seated magmatic water and shallower meteoric water. The ore formations resulted from a combination of hydrothermal fluid mixing and a structural setting favoring gold-polymetal deposition. Fluid mixing was possibly the key factor resulting in Au-Ag-Cu-Pb-Zn deposition in the deposit. The metallogenesis of the Bianbianshan deposit may have a relationship with the Cretaceous volcanic-subvolcanic magmatic activity, and formed during the late stage of the crust thinning of North China.  相似文献   

12.
Felsic volcanic units of the Early Devonian Bindook Volcanic Complex host the Yerranderie epithermal silver–gold–lead district 94 km west–southwest of Sydney. Mineralization in the district forms part of a fault‐controlled, intermediate sulfidation, epithermal silver–gold–base metal vein system that has significant mineral and alteration zonation. Stage 1 of the mineral paragenesis in the veins developed quartz and carbonate with early pyrite, whereas stage 2 is a crustiform banded quartz–pyrite–arsenopyrite assemblage. Stage 3, the main stage of sulfide deposition, comprises early sphalerite, followed by a tetrahedrite–tennantite–gold assemblage, then a galena–chalcopyrite–native silver–pyrite assemblage, and finally a pyrargyrite–polybasite–pearceite assemblage. Stage 4 involves the deposition of quartz veins with minor (late) pyrite and stage 5 is characterized by siderite that infilled remaining voids. Mineral zonation occurs along the Yerranderie Fault, with bornite being restricted to the Colon Peaks–Silver Peak mine area, whereas arsenopyrite, which is present in both the Colon Peaks–Silver Peak and Wollondilly mine areas, is absent in other lodes along the Yerranderie Fault. The Yerranderie Fault, which hosts the major lodes, is surrounded by a zoned alteration system. With increasing proximity to the fault the intensity of alteration increases and the alteration assemblage changes from an outer quartz–muscovite–illite–(ankerite) assemblage to a quartz–illite–(pyrite–carbonate) assemblage within meters of the fault. 40Ar/39Ar dating of muscovite from the alteration zone gave a 372.1 ± 1.9 Ma (Late Devonian) age, which is interpreted to be the timing of the quartz–sulfide vein formation. Sulfur isotope values for sulfides range from 0.1 to 6.2‰ with one outlier of ?5.6 δ34S‰. The results indicate that the initial ore‐forming fluids were reduced, and that sulfur was probably sourced from a magmatic reservoir, either as a direct magmatic contribution or indirectly through dissolution and recycling of sulfur from the host volcanic sequence. The sulfur isotope data suggest the system is isotopically zoned.  相似文献   

13.
Abstract. The Cibaliung gold project is located at the central portion of the Neogene Sunda‐Banda magmatic arc. Gold‐silver mineralization in the area is hosted in a thick sequence of sub‐aqueous basaltic andesite volcanics with intercalated sediments intruded by sub‐volcanic andesite to diorite plugs and dykes, and subsequently cut by a cluster of diatreme breccias. These host rocks are unconformably overlain by dacitic tuffs, younger sediments and basalt flows. The gold prospects in Cibaliung occur within a NW‐trending structural corridor that is 3.5 km wide by at least 6 km long. It is fault‐bounded and is considered to be a graben. Two aligned NNW‐trending sub‐vertical shoots, Cikoneng and Cibitung, host the currently defined resource within the steeply dipping vein system with a minimum strike length of 1,300 m. As of July 2001, exploration has defined an inferred + indicated mineral resource of approximately 1.3 million tonnes at 10.42 g/t gold and 60.7 g/t silver at a 3 g/t Au cut‐off. This equates to approximately 435,000 ounces of gold and 2.54 million ounces of silver. Gold‐silver mineralization occurs as quartz veins characteristic of the low‐sulphidation epithermal adularia‐sericite type. Progressive dilation with a general increase in gold grade has produced multi‐stage veining and brecciation that grades from early to late stages as: pre‐mineral fluidized breccia, quartz vein stockwork, massive vein, crustiform vein, colloform‐crustiform vein with progressive increase in chloritic clay bands, clay‐quartz milled matrix breccias with a progressive increase in clay content, and synto post‐mineral fault gouge with vein clasts. Wall rock alteration is characterized by pro‐grade chlorite+adularia flooding that is locally overprinted by a low temperature argillic alteration (smectite, illite and mixed layered clays). Generally, the argillic alteration becomes weak with depth. The major mineral constituents of the veins are quartz, adularia and clay. In the early gold‐poor hydrothermal stages, quartz and adularia dominate with minor calcite and clay (smectite, poorly crystalline chlorite, interlayered chlorite‐smectite and illite‐smectite). In the later gold‐rich hydrothermal stages, clay with variable amounts of carbonate increases whereas the abundance of quartz and adularia decreases. Gold occurs mainly as electrum while silver occurs as argentite‐aguilarite‐naumannite and electrum, and rarely as native silver, sulphosalts and tellurides. Sulphides generally comprise <1 vol % of the vein, with pyrite as the most common species. Together with pyrite, traces of very fine‐grained base metal sulphides dominated by chalcopyrite, sphalerite and galena are in most cases intimately associated with electrum and silver minerals. Partial supergene oxidation generally extends down to about 200 m below the surface at Cikoneng and further down to more than 300 m at Cibitung. The hydrothermal system responsible for the gold‐silver mineralization in the area may be related to rhyolitic magmatism focused on a volcanic intrusive center during back arc rifting that formed a graben or pull‐apart basin. The dominant mechanism for the higher grade gold deposition is fluid mixing of up welling metal‐bearing hydrothermal solutions with relatively near surface cool, oxygenated condensate and/or steam‐heated meteoric fluids, as opposed to retrograde boiling. The strongly focused dilational structural environment is thought to have been the mechanism for focusing fluid flows, both up welling and descending, forming pipe‐like mineralized bodies in the rhomboidal dilation zones. It is interpreted that mineralization took place under low temperature conditions (<150–220d?C) at a minimum depth of around 200–250 m below the palaeo‐water table.  相似文献   

14.
Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran   总被引：1，自引：1，他引：1  
The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.  相似文献   

15.
The Sawuershan region, one of the important gold metallogenic belts of Xinjiang, is located in the western part of the Kalatongke island arc zone of north Xinjiang, NW China. There are two gold deposits in mining, namely the Kuoerzhenkuola and the Buerkesidai deposits. Gold ores at the Kuoerzhenkuola deposit occur within Carboniferous andesite and volcanic breccias in the form of gold‐bearing quartz–pyrite veins and veinlet groups containing native gold, electrum, pyrite, pyrrhotite and chalcopyrite. Gold ores at the Buerkesidai deposit occur within Carboniferous tuffaceous siltstones in the form of gold‐bearing quartz veinlet groups and altered rocks, with electrum, pyrite and arsenopyrite as major metallic minerals. Both gold deposits are hosted by structurally controlled faults associated with intense hydrothermal alteration. The typical alteration assemblage is sericite + chlorite + calcite + quartz, with an inner pyrite–sericite zone and an outer chlorite–calcite–epidote zone between orebodies and wall rocks. δ34S values (0.3–1.3‰) of pyrite of ores from Kuoerzhenkuola deposit are similar to those (0.4–2.9‰) of pyrite of ores from Buerkesidai deposit. δ34S values (1.1–2.8‰) of pyrite from altered rocks are similar to δ34S values of magmatic or igneous sulfide sulfur, but higher than those from ores. 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb data of sulfide from ores range within 17.72–18.56, 15.34–15.61, and 37.21–38.28, respectively. These sulfur and lead isotope compositions imply that ore‐forming materials might originate from multiple, mainly deep sources. He and Ar isotope study on fluid inclusions of pyrites from ores of Kuoerzhenkuola and Buerkesidai gold deposits produces 40Ar/36Ar and 3He/4He ratios in the range of 282–525 and 0.6–9.4 R/Ra, respectively, indicating a mixed source of deep‐seated magmatic water (mantle fluid) and shallower meteoric water. In terms of tectonic setting, the gold deposits in the Sawuershan region can be interpreted as epithermal. These formations resulted from a combination of protracted volcanic activity, hydrothermal fluid mixing, and a structural setting favoring gold deposition. Fluid mixing was possibly the key factor resulting in Au deposition in the gold deposits in Sawuershan region.  相似文献   

16.
The Makeng iron deposit is located in the Yong’an-Meizhou depression belt in Fujian Province, eastern China. Both skarn alteration and iron mineralization are mainly hosted within middle Carboniferous-lower Permian limestone. Five paragenetic stages of skarn formation and ore deposition have been recognized: Stage 1, early skarn (andradite–grossular assemblage); Stage 2, magnetite mineralization (diopside–magnetite assemblage); Stage 3, late skarn (amphibole–chlorite–epidote–johannsenite–hedenbergite–magnetite assemblage); Stage 4, sulfide mineralization (quartz–calcite–fluorite–chlorite–pyrite–galena–sphalerite assemblage); and Stage 5, carbonate (quartz–calcite assemblage). Fluid inclusion studies were carried out on inclusions in diopside from Stage 2 and in quartz, calcite, and fluorite from Stage 4.Halite-bearing (Type 1) and coexisting two-phase vapor-rich aqueous (Type 3) inclusions in the magnetite stage display homogenization temperatures of 448–564 °C and 501–594 °C, respectively. Salinities range from 26.5 to 48.4 and 2.4 to 6.9 wt% NaCl equivalent, respectively. Two-phase liquid-rich aqueous (Type 2b) inclusions in the sulfide stage yield homogenization temperatures and salinities of 182–343 °C and 1.9–20.1 wt% NaCl equivalent. These fluid inclusion data indicate that fluid boiling occurred during the magnetite stage and that fluid mixing took place during the sulfide stage. The former triggered the precipitation of magnetite, and the latter resulted in the deposition of Pb, Zn, and Fe sulfides. The fluids related to magnetite mineralization have δ18Ofluid-VSMOW of 6.7–9.6‰ and δD of −96 to −128‰, which are interpreted to indicate residual magmatic water from magma degassing. In contrast, the fluids related to the sulfide mineralization show δ18Ofluid-VSMOW of −0.85 to −1.04‰ and δD of −110 to −124‰, indicating that they were generated by the mixing of magmatic water with meteoric water. Magnetite grains from Stage 2 exhibit oscillatory zoning with compositional variations in major elements (e.g., SiO2, Al2O3, CaO, MgO, and MnO) from core to rim, which is interpreted as a self-organizing process rather than a dissolution-reprecipitation process. Magnetite from Stage 3 replaces or crosscuts early magnetite, suggesting that later hydrothermal fluid overprinted and caused dissolution and reprecipitation of Stage 2 magnetite. Trace element data (e.g., Ti, V, Ca, Al, and Mn) of magnetite from Stages 2 and 3 indicate a typical skarn origin.  相似文献   

17.
Centimetre‐ to decimetre‐wide quartz+calcite veins in schistes lustrés from Alpine Corsica were formed during exhumation at 30–40 Ma following blueschist facies metamorphism. The δ18O and δ13C values of the veins overlap those of the host schistes lustrés, and the δ18O values of the veins are much higher than those of other rocks on Corsica. These data suggest that the vein‐forming fluids were derived from the schistes lustrés. Fluids were probably generated by reactions that broke down carpholite, lawsonite, chlorite and white mica at 300–350 °C during decompression between c. 1400 and 800 MPa. However, the δ18O values of the veins are locally several per mil higher than expected given those of their host rocks. The magnitude of oxygen isotope disequilibrium between the veins and the host rock is inversely proportional to the δ18O value of the host rock. Additionally, calcite in some schists is in isotopic equilibrium with calcite in adjacent veins, but not with the silicate fraction of the schists. Locally, the schists are calcite bearing only within 1–20 cm of the veins. The vein‐forming fluids may have been preferentially derived from calcite‐bearing, high‐δ18O rocks that are common within the schistes lustrés and that locally contain abundant (>15%) veins. If the fluids were unable to completely isotopically equilibrate with the rocks, due to relatively rapid flow at moderate temperatures or being confined to fractures, they could form veins with higher δ18O values than those of the surrounding rocks. Alteration of the host rocks was probably inhibited by isolation of the fluid in ‘quartz‐armoured’ veins. Overall, the veins represent a metre‐ to hectometre‐scale fluid‐flow system confined to within the schistes lustrés unit, with little input from external sources. This fluid‐flow system is one of several that operated in the western Alps during exhumation following high‐pressure metamorphism.  相似文献   

18.
Interpretation of various exploration data, in particular geochemical prospecting, offers a powerful and rapid assessment of grass-root projects in a green-field terrain. Here, we present an example of the Collins epithermal prospect in Aceh Province, Indonesia. In this area, the Au+ base-metal-bearing sheeted quartz veins (individually mostly 2–4 cm wide), which are controlled by a 250 m wide by 800 m long NNE-trending structural corridor within Paleogene sandstone and volcanic rocks, are the product of two main stages of deposition. Stage I formed veins with a sliver of cryptocrystalline quartz wall zone followed by an inner zone of comb quartz with interstitial rhombic adularia that terminates in open space. Stage I or main-stage sulfide mineralization consisting of early galena + sphalerite and later chalcopyrite occurs with the quartz + adularia. Small amounts of galena also occur in the wall zone. Stage II mineralization brecciated Stage I veins and overprinted them with silicification characterized by vuggy texture. Mineralization associated with this episode consists of earlier chalcopyrite + sphalerite + tennantite–tetrahedrite and later, vug-filling Au–Ag alloy (Ag0.37–0.41Au0.62–0.59). The above mineralized veins are successively flanked by silicic selvages, an illite + chlorite + pyrite ± kaolinite zone and a chlorite + epidote + carbonate + pyrite zone. Local supergene alteration induced replacement of galena by plumbogummite and anglesite and chalcopyrite by covellite. Data from fluid inclusion microthermometry in quartz indicated that the inner zone of Stage I veins formed from fluids with a 2.3 wt% salinity (0.5–3.3 wt% NaCl equivalent), at 174°C (155–211°C). Combining these physico-chemical parameters with the mineral assemblage, the mineralization occurred under a reduced environment. Rock and soil assays indicate that elevated Au concentrations (up to 16.5 ppm over 1 m) occur along northeast-trending zones and show a strong correlation with Pb, while Cu (up to 2.58% over 1 m), Zn, As, Sb, and Mo anomalies lie mostly at the periphery. The high-grade mineralized veins correlate with moderate to high resistivity and chargeability zones, and the pseudosections of such geophysical signals are interpreted as reflecting coalesced or enlarged veins at depth, or inclined veins in other localities. The intermediate sulfidation affinity for Collins points to potential mineralization at depth as well as preservation of Au-rich and sulfide-poor zones in the less eroded areas.  相似文献   

19.
The Xiuwenghala gold deposit is located in the Beishan Orogen of the southern Central Asian Orogenic Belt. The vein/lenticular gold orebodies are controlled by Northeast‐trending faults and are hosted mainly in the brecciated/altered tuff and rhyolite porphyry of the Lower Carboniferous Baishan Formation. Metallic minerals include mainly pyrite and minor chalcopyrite, arsenopyrite, galena, and sphalerite, whilst nonmetallic minerals include quartz, chalcedony, sericite, chlorite, and calcite. Hydrothermal alterations consist of silicic, sericite, chlorite, and carbonate. Alteration/mineralization processes comprise three stages: pre‐ore silicic alteration (Stage I), syn‐ore quartz‐chalcedony‐polymetallic sulfide mineralization (Stage II), and post‐ore quartz‐calcite veining (Stage III). Fluid inclusions (FIs) in quartz and calcite are dominated by L‐type with minor V‐type and lack any daughter mineral‐bearing or CO2‐rich/‐bearing inclusions. From Stages I to III, the FIs homogenized at 240–260°C, 220–250°C, and 150–190°C, with corresponding salinities of 2.9–10.9, 3.2–11.1, and 2.9–11.9 wt.% NaCl eqv., respectively. The mineralization depth at Xiuwenghala is estimated to be relatively shallow (<1 km). FI results indicate that the ore‐forming fluids belong to a low to medium‐temperature, low‐salinity, and low‐density NaCl‐H2O system. The values decrease from Stage I to III (3.7‰, 1.7–2.4‰, and ?1.7 to 0.9‰, respectively), and a similar trend is found for their values (?104 to ?90‰, ?126 to ?86‰, and ?130 to ?106‰, respectively). This indicates that the fluid source gradually evolved from magmatic to meteoric. δ34S values of the hydrothermal pyrites (?3.0 to 0.0‰; avg. ?1.1‰) resemble those of typical magmatic/mantle‐derived sulfides. Pyrite Pb isotopic compositions (206Pb/204Pb = 18.409–18.767, 207Pb/204Pb = 15.600–15.715, 208Pb/204Pb = 38.173–38.654) are similar to those of the (sub)volcanic ore host, indicating that the origin of ore‐forming material was mainly the upper crustal (sub)volcanic rocks. Integrating evidence from geology, FIs, and H–O–S–Pb isotopes, we suggest that Xiuwenghala is best classified as a low‐sulfidation epithermal gold deposit.  相似文献   

20.
Burial Metamorphism of the Ordos Basin in Northern Shaanxi   总被引：1，自引：0，他引：1  
Burial metamorphism has been found in the Ordos basin of northern Shaanxi. On the basis of a rather intensive study of burial metamorphism of sandstone, it has been shown that the evolution from diagenesis to metamorphism involves four stages: cementation of clay minerals, regrowth of pressolved quartz and feldspar, cementation of carbonates and formation of laumontite. On that basis it has been put forward that the laumontite is formed by burial metamorphism of clay and carbonate minerals. According to the thermodynamic data of minerals, the conditions under which laumontite is formed are T<250℃ and X_(CO_2)<0.17. High-resolution SEM and TEM studies of clay minerals in mudstone show that there occur a mixed layer assemblage of bertherine and illite/chlorite and transformation from bertherine to chlorite. On that basis coupled by the X-ray diffraction analysis the author suggests the following transformation of clay minerals during burial metamorphism: the earliest smectite-kaolinite assemblage changes into the bertherine-illite mixture with increasing depth, then into the illite/chlorite mixed layer assemblage and finally into dispersed individual illite and chlorite. The reaction of the transformation is:smectite+kaolinite+K~+=illite+chlorite+quartz According to the study of the oxygen isotope thermometry of the coexisting illitequartz pair, the temperature of the above transformation is lower than 180℃.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号