首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 634 毫秒
1.
Full waveform inversion in transversely isotropic media with a vertical symmetry axis provides an opportunity to better match the data at the near and far offsets. However, multi-parameter full waveform inversion, in general, suffers from serious cycle-skipping and trade-off problems. Reflection waveform inversion can help us recover a background model by projecting the residuals of the reflected wavefield along the reflection wavepath. Thus, we extend reflection waveform inversion to acoustic transversely isotropic media with a vertical symmetry axis utilizing the proper parameterization for reduced parameter trade-off. From a radiation patterns analysis, an acoustic transversely isotropic media with a vertical symmetry axis is better described by a combination of the normal-moveout velocity and the anisotropic parameters η and δ for reflection waveform inversion applications. We design a three-stage inversion strategy to construct the optimal resulting model. In the first stage, we only invert for the background by matching the simulated reflected wavefield from the perturbations of and δ with the observed reflected wavefield. In the second stage, the background and η are optimized simultaneously and the far-offset reflected wavefield mainly contribute to their updates. We perform Born modelling to compute the reflected wavefield for the two stages of reflection waveform inversion. In the third stage, we perform full waveform inversion for the acoustic transversely isotropic media with a vertical symmetry axis to delineate the high-wavenumber structures. For this stage, the medium is described by a combination of the horizontal velocity , η and ε instead of , η and δ. The acoustic multi-parameter full waveform inversion utilizes the diving waves to improve the background as well as utilizes reflection for high-resolution information. Finally, we test our inversion algorithm on the modified Sigsbee 2A model (a salt free part) and a two-dimensional line from a three-dimensional ocean bottom cable dataset. The results demonstrate that the proposed reflection waveform inversion approach can recover the background model for acoustic transversely isotropic media with a vertical symmetry axis starting from an isotropic model. This recovered background model can mitigate the cycle skipping of full waveform inversion and help the inversion recover higher resolution structures.  相似文献   

2.
Surface waves are often used to estimate a near‐surface shear‐velocity profile. The inverse problem is solved for the locally one‐dimensional problem of a set of homogeneous horizontal elastic layers. The result is a set of shear velocities, one for each layer. To obtain a P‐wave velocity profile, the P‐guided waves should be included in the inversion scheme. As an alternative to a multi‐layered model, we consider a simple smooth acoustic constant‐density velocity model, which has a negative constant vertical depth gradient of the squared P‐wave slowness and is bounded by a free surface at the top and a homogeneous half‐space at the bottom. The exact solution involves Airy functions and provides an analytical expression for the dispersion equation. If the ratio is sufficiently small, the dispersion curves can be picked from the seismic data and inverted for the continuous P‐wave velocity profile. The potential advantages of our model are its low computational cost and the fact that the result can serve as a smooth starting model for full‐waveform inversion. For the latter, a smooth initial model is often preferred over a rough one. We test the inversion approach on synthetic elastic data computed for a single‐layer P‐wave model and on field data, both with a small ratio. We find that a single‐layer model can recover either the shallow or deeper part of the profile but not both, when compared with the result of a multi‐layer inversion that we use as a reference. An extension of our analytic model to two layers above a homogeneous half‐space, each with a constant vertical gradient of the squared P‐wave slowness and connected in a continuous manner, improves the fit of the picked dispersion curves. The resulting profile resembles a smooth approximation of the multi‐layered one but contains, of course, less detail. As it turns out, our method does not degrade as gracefully as, for instance, diving‐wave tomography, and we can only hope to fit a subset of the dispersion curves. Therefore, the applicability of the method is limited to cases where the ratio is small and the profile is sufficiently simple. A further extension of the two‐layer model to more layers, each with a constant depth gradient of the squared slowness, might improve the fit of the modal structure but at an increased cost.  相似文献   

3.
The reflectivity method plays an important role in seismic modelling. It has been used to model different types of waves propagating in elastic and anelastic media. The diffusive–viscous wave equation was proposed to investigate the relationship between frequency dependence of reflections and fluid saturation. It is also used to describe the attenuation property of seismic wave in a fluid‐saturated medium. The attenuation of diffusive–viscous wave is mainly characterised by the effective attenuation parameters in the equation. Thus, it is essential to obtain those parameters and further characterise the features of the diffusive–viscous wave. In this work, we use inversion method to obtain the effective attenuation parameters through quality factor to investigate the characteristics of diffusive–viscous wave by comparing with those of the viscoacoustic wave. Then, the reflection/transmission coefficients in a dip plane‐layered medium are studied through coordinate transform and plane‐wave theory. Consequently, the reflectivity method is extended to compute seismograms of diffusive–viscous wave in a dip plane multi‐layered medium. Finally, we present two models to simulate the propagation of diffusive–viscous wave in a dip plane multi‐layered medium by comparing the results with those in a viscoacoustic medium. The numerical results demonstrate the validity of our extension of reflectivity method to the diffusive–viscous medium. The numerical examples in both time domain and time–frequency domain show that the reflections from a dip plane interface have significant phase shift and amplitude change compared with the results of horizontal plane interface due to the differences in reflection/transmission coefficients. Moreover, the modelling results show strong attenuation and phase shift in the diffusive–viscous wave compared to those of the viscoacoustic wave.  相似文献   

4.
Seismic reflection pre‐stack angle gathers can be simultaneously inverted within a joint facies and elastic inversion framework using a hierarchical Bayesian model of elastic properties and categorical classes of rock and fluid properties. The Bayesian prior implicitly supplies low frequency information via a set of multivariate compaction trends for each rock and fluid type, combined with a Markov random field model of lithotypes, which carries abundance and continuity preferences. For the likelihood, we use a simultaneous, multi‐angle, convolutional model, which quantifies the data misfit probability using wavelets and noise levels inferred from well ties. Under Gaussian likelihood and facies‐conditional prior models, the posterior has simple analytic form, and the maximum a‐posteriori inversion problem boils down to a joint categorical/continuous non‐convex optimisation problem. To solve this, a set of alternative, increasingly comprehensive optimisation strategies is described: (i) an expectation–maximisation algorithm using belief propagation, (ii) a globalisation of method (i) using homotopy, and (iii) a discrete space approach using simulated annealing. We find that good‐quality inversion results depend on both sensible, elastically separable facies definitions, modest resolution ambitions, reasonably firm abundance and continuity parameters in the Markov random field, and suitable choice of algorithm. We suggest usually two to three, perhaps four, unknown facies per sample, and usage of the more expensive methods (homotopy or annealing) when the rock types are not strongly distinguished in acoustic impedance. Demonstrations of the technique on pre‐stack depth‐migrated field data from the Exmouth basin show promising agreements with lithological well data, including prediction accuracy improvements of 24% in and twofold in density, in comparison to a standard simultaneous inversion. Much clearer and extensive recovery of the thin Pyxis gas field was evident using stronger coupling in the Markov random field model and use of the homotopy or annealing algorithms.  相似文献   

5.
The conventional velocity scan can be computationally expensive for large‐scale seismic data sets, particularly when the presence of anisotropy requires multiparameter scanning. We introduce a fast algorithm for 3D azimuthally anisotropic velocity scan by generalizing the previously proposed 2D butterfly algorithm for hyperbolic Radon transforms. To compute semblance in a two‐parameter residual moveout domain, the numerical complexity of our algorithm is roughly as opposed to of the straightforward velocity scan, with N being the representative of the number of points in a particular dimension of either data space or parameter space. Synthetic and field data examples demonstrate the superior efficiency of the proposed algorithm.  相似文献   

6.
  相似文献   

7.
The nonlinearity of the seismic amplitude‐variation‐with‐offset response is investigated with physical modelling data. Nonlinearity in amplitude‐variation‐with‐offset becomes important in the presence of large relative changes in acoustic and elastic medium properties. A procedure for pre‐processing physical modelling reflection data is enacted on the reflection from a water‐plexiglas boundary. The resulting picked and processed amplitudes are compared with the exact solutions of the plane‐wave Zoeppritz equations, as well as approximations that are first, second, and third order in , , and . In the low angle range of 0°–20°, the third‐order plane‐wave approximation is sufficient to capture the nonlinearity of the amplitude‐variation‐with‐offset response of a liquid‐solid boundary with , , and ρ contrasts of 1485–2745 m/s, 0–1380 m/s, and 1.00–1.19 gm/cc respectively, to an accuracy value of roughly 1%. This is in contrast to the linear Aki–Richards approximation, which is in error by as much as 25% in the same angle range. Even‐order nonlinear corrective terms are observed to be primarily involved in correcting the angle dependence of , whereas the odd‐order nonlinear terms are involved in determining the absolute amplitude‐variation‐with‐offset magnitudes.  相似文献   

8.
While seismic reflection amplitudes are generally determined by real acoustical impedance contrasts, there has been recent interest in reflections due to contrasts in seismic‐Q. Herein we compare theoretical and modelled seismic reflection amplitudes for two different cases of material contrasts. In case A, we examine reflections from material interfaces that have a large contrast in real‐valued impedance () with virtually no contrast in seismic‐Q. In case B, we examine reflections from material interfaces that have virtually no contrast in but that have very large seismic‐Q contrasts. The complex‐valued reflection coefficient formula predicts non‐zero seismic reflection amplitudes for both cases. We choose physical materials that typify the physics of both case A and case B. Physical modelling experiments show significantly large reflections for both cases – with the reflections in the two cases being phase shifted with respect to each other, as predicted theoretically. While these modelling experiments show the existence of reflections that are predicted by theory, there are still intriguing questions regarding the size of the Q‐contrast reflections, the existence of large Q‐contrast reflections in reservoir rocks and the possible application of Q‐reflection analysis to viscosity estimation in heavy oilfields.  相似文献   

9.
The reassignment method remaps the energy of each point in a time‐frequency spectrum to a new coordinate that is closer to the actual time‐frequency location. Two applications of the reassignment method are developed in this paper. We first describe time‐frequency reassignment as a tool for spectral decomposition. The reassignment method helps to generate more clear frequency slices of layers and therefore, it facilitates the interpretation of thin layers. The second application is to seismic data de‐noising. Through thresholding in the reassigned domain rather than in the Gabor domain, random noise is more easily attenuated since seismic events are more compactly represented with a relatively larger energy than the noise. A reconstruction process that permits the recovery of seismic data from a reassigned time‐frequency spectrum is developed. Two approaches of the reassignment method are used in this paper, one of which is referred to as the trace by trace time reassignment that is mainly used for seismic spectral decomposition and another that is the spatial reassignment that is mainly used for seismic de‐noising. Synthetic examples and two field data examples are used to test the proposed method. For comparison, the Gabor transform method, inversion‐based method and common deconvolution method are also used in the examples.  相似文献   

10.
Our objective was to discover the effect of variations in fluid properties and fracture geometry on the velocity of seismic wave propagation in fluid‐saturated media with parallel planar fractures. We used numerical models calculated by analytical solutions to examine the behaviour of P‐wave phase velocity dispersion in the normal direction to layering, in non‐porous and porous media with planar fractures. We also examined the anisotropy of low frequency phase and group velocities of fast and slow P‐waves and angular‐dependent reflection coefficients in media with planar fractures, under conditions of saturation by fluids with varying bulk moduli, densities, and fracture apertures. We defined several parametre , , and characterising dispersion, characterising anisotropy, characterising the difference between fast and slow modes, and R0 and characterising reflection. Our results show that the behaviour of dispersion shows wider stopbands in the case of gas saturation. Concavity indicator of dispersion for gas saturation was greater than that for liquid saturation and is usually greater than one. Anisotropy is more sensitive to bulk modulus contrast than to density contrast between the solid and the fluid, and is more sensitive to density contrast than to bulk modulus contrast. The case of gas saturation usually had a greater negative R0 and a greater value of compared with those of brine and heavy and light oil saturations. Our results are helpful in distinguishing fluid types saturating geophysical fractures and estimating the aperture and spacing of planar fractures. In seismic exploration, bulk modulus and fluid density can provide useful information in distinguishing among brine, oil, and gas; fracture geometry is important to estimate the permeability of reservoirs.  相似文献   

11.
地震走时层析成像是反演地层各向异性参数分布的有效方法,但是关于地震各向异性介质走时层析成像的研究并不多,其技术远远没有达到成熟的阶段.在野外数据采集时,地表反射波观测方式相对井间和垂直地震剖面观测方式的成本更低,利用qP反射波走时反演各向异性参数具有更加广泛的实用价值.本文实现的TI介质地震走时层析成像方法结合了TI介质反射波射线追踪算法、走时扰动方程和非线性共轭梯度算法,它可以对任意强度的TI介质模型进行反演,文中尝试利用qP反射波走时重建TI介质模型的参数图像.利用qP反射波对层状介质模型和块状异常体模型进行走时反演,由于qP波相速度对弹性模量参数和Thomsen参数的偏微分不同,所以可以分别反演弹性模量参数和Thomsen参数.数值模拟结果表明:利用qP反射波可以反演出TI介质模型的弹性模量参数与Thomsen参数,不同模型的走时迭代反演达到了较好的收敛效果,与各向同性介质走时反演结果相比较,各向异性介质走时反演结果具有较好的识别能力.  相似文献   

12.
Several power‐law relationships of geophysical potential fields have been discussed recently with renewed interests, including field value–distance () and power spectrum–wavenumber () models. The singularity mapping technique based on the density/concentration–area (C–A) power‐law model is applied to act as a high‐pass filter for extracting gravity and magnetic anomalies regardless of the background value and to detect the edges of gravity or magnetic sources with the advantage of scale invariance. This is demonstrated on a synthetic example and a case study from the Nanling mineral district, Southern China. Compared with the analytic signal amplitude and total horizontal gradient methods, the singularity mapping technique provides more distinct and less noisy boundaries of granites than traditional methods. Additionally, it is efficient for enhancing and outlining weak anomalies caused by concealed granitic intrusions, indicating that the singularity method based on multifractal analysis is a potential tool to process gravity and magnetic data.  相似文献   

13.
When modelling the propagation of 3D non‐axisymmetric elastic and viscoelastic waves in cylindrical coordinates using the finite‐difference time‐domain method, a mathematical singularity occurs due to the presence of terms in the elastic and viscoelastic wave equations. For many years, this issue has been impeding the accurate numerical solution near the axis. In this work, we propose a simple but effective method for the treatment of this numerical singularity problem. By rotating the Cartesian coordinate system around the z‐axis in cylindrical coordinates, the numerical singularity problems in both 2D and 3D cylindrical coordinates can be removed. This algorithm has three advantages over the conventional treatment techniques: (i) the excitation source can be directly loaded at , (ii) the central difference scheme with second‐order accuracy is maintained, and (iii) the stability condition at the axis is consistent with the finite‐difference time‐domain in Cartesian coordinates. This method is verified by several 3D numerical examples. Results show that the rotating the Cartesian coordinate method is accurate and stable at the singularity axis. The improved finite‐difference time‐domain algorithm is also applied to sonic logging simulations in non‐axisymmetric formations and sources.  相似文献   

14.
The subsurface media are not perfectly elastic, thus anelastic absorption, attenuation and dispersion (aka Q filtering) effects occur during wave propagation, diminishing seismic resolution. Compensating for anelastic effects is imperative for resolution enhancement. Q values are required for most of conventional Q-compensation methods, and the source wavelet is additionally required for some of them. Based on the previous work of non-stationary sparse reflectivity inversion, we evaluate a series of methods for Q-compensation with/without knowing Q and with/without knowing wavelet. We demonstrate that if Q-compensation takes the wavelet into account, it generates better results for the severely attenuated components, benefiting from the sparsity promotion. We then evaluate a two-phase Q-compensation method in the frequency domain to eliminate Q requirement. In phase 1, the observed seismogram is disintegrated into the least number of Q-filtered wavelets chosen from a dictionary by optimizing a basis pursuit denoising problem, where the dictionary is composed of the known wavelet with different propagation times, each filtered with a range of possible values. The elements of the dictionary are weighted by the infinity norm of the corresponding column and further preconditioned to provide wavelets of different values and different propagation times equal probability to entry into the solution space. In phase 2, we derive analytic solutions for estimates of reflectivity and Q and solve an over-determined equation to obtain the final reflectivity series and Q values, where both the amplitude and phase information are utilized to estimate the Q values. The evaluated inversion-based Q estimation method handles the wave-interference effects better than conventional spectral-ratio-based methods. For Q-compensation, we investigate why sparsity promoting does matter. Numerical and field data experiments indicate the feasibility of the evaluated method of Q-compensation without knowing Q but with wavelet given.  相似文献   

15.
We investigate fracture‐induced attenuation anisotropy in a cluster of events from a microseismic dataset acquired during hydraulic fracture stimulation. The dataset contains 888 events of magnitude ?3.0 to 0.0. We use a log‐spectral‐amplitude‐ratio method to estimate change in over a half‐hour time period where fluid is being injected and an increase in fracturing from S‐wave splitting analysis has been previously inferred. A Pearson's correlation analysis is used to assess whether or not changes in attenuation with time are statistically significant. P‐waves show no systematic change in during this time. In contrast, S‐waves polarised perpendicular to the fractures show a clear and statistically significant increase with time, whereas S‐waves polarised parallel to the fractures show a weak negative trend. We also compare between the two S‐waves, finding an increase in with time. A poroelastic rock physics model of fracture‐induced attenuation anisotropy is used to interpret the results. This model suggests that the observed changes in t* are related to an increase in fracture density of up to 0.04. This is much higher than previous estimates of 0.025 ± 0.002 based on S‐wave velocity anisotropy, but there is considerably more scatter in the attenuation measurements. This could be due to the added sensitivity of attenuation measurement to non‐aligned fractures, fracture shape, and fluid properties. Nevertheless, this pilot study shows that attenuation measurements are sensitive to fracture properties such as fracture density and aspect ratio.  相似文献   

16.
We have derived a convergent scattering series solution for the frequency-domain wave equation in acoustic media with variable density and velocity. The convergent scattering series solution is based on the homotopy analysis of a vectorial integral equation of the Lippmann–Schwinger type. By using the Green's function and partial integration, we have derived the vectorial integral equation of the Lippmann–Schwinger type that involves the pressure gradient field as well as the pressure field from the wave equation. The vectorial Lippmann–Schwinger equation can in principle be solved via matrix inversion, but the computational cost of matrix inversion scales like N 3 , where N is the number of grid blocks. The computational cost can be significantly reduced if one solves the vectorial Lippmann–Schwinger equation iteratively. A simple iterative solution is the Born series, but it is only convergent when the scattering potential is sufficiently small. In this study, we have used the so-called homotopy analysis method to derive an iterative solution for the vectorial Lippmann–Schwinger equation which can be made convergent even in strongly scattering media. The computational cost of our convergent scattering series scales as N 2 . Our algorithm, which is based on the homotopy analysis method, involves a convergence control operator that we select using hierarchical matrices. We use a three-layer model and a resampled version of the SEG/EAGE salt model to show the performance of the developed convergent scattering series.  相似文献   

17.
We present a parsimonious wave‐equation travel‐time inversion technique for refraction waves. A dense virtual refraction dataset can be generated from just two reciprocal shot gathers for the sources at the endpoints of the survey line, with N geophones evenly deployed along the line. These two reciprocal shots contain approximately 2N refraction travel times, which can be spawned into refraction travel times by an interferometric transformation. Then, these virtual refraction travel times are used with a source wavelet to create N virtual refraction shot gathers, which are the input data for wave‐equation travel‐time inversion. Numerical results show that the parsimonious wave‐equation travel‐time tomogram has about the same accuracy as the tomogram computed by standard wave‐equation travel‐time inversion. The most significant benefit is that a reciprocal survey is far less time consuming than the standard refraction survey where a source is excited at each geophone location.  相似文献   

18.
Under certain circumstances, seismic propagation within porous media may be associated to the conversion of mechanical energy to electromagnetic energy, which is known as a seismo‐electromagnetic phenomenon. The propagation of fast compressional P‐waves is more specifically associated to the manifestations of a seismoelectric field linked to the fluid flows within the pores. The analysis of seismoelectric phenomena, which requires the combination of the theory of electrokinetics and Biot's theory of poroelasticity, provides us with transfer function that links the coseismic seismoelectric field E to the seismic acceleration . To measure the transfer function, we have developed an experimental setup enabling seismoelectric laboratory observation in unconsolidated quartz sand within the kilohertz range. The investigation focused on the impact of fluid conductivity and water saturation over the coseismic seismoelectric field. During the experiment, special attention was given to the accuracy of electric field measurements. We concluded that, to obtain a reliable estimate of the electric field amplitude, the dipole from which the potential differences are measured should be of much smaller length than the wavelength of the propagating seismic field. Time‐lapse monitoring of the seismic velocities and seismoelectric transfer functions were performed during imbibition and drainage experiments. In all cases, the quantitative analysis of the seismoelectric transfer function was in good agreement with theoretical predictions. While investigating saturation variations from full to residual water saturation, we showed that the ratio undergoes a switch in polarity at a particular saturation , which also implies a sign change of the filtration, traducing a reversal of the relative fluid displacement with respect to the frame. This sign change at critical saturation stresses a particular behaviour of the poroelastic medium: the dropping of the coseismic electric field to zero traduces the absence of relative pore/fluid displacements representative of a Biot dynamically compatible medium. We concluded from our experimental study in loose sand that the measurements of the coseismic seismoelectric coupling may provide information on fluid distribution within the pores and that the reversal of the seismoelectric field may be used as an indicator of the dynamically compatible state of the medium.  相似文献   

19.
Compressed Sensing has recently proved itself as a successful tool to help address the challenges of acquisition and processing seismic data sets. Compressed sensing shows that the information contained in sparse signals can be recovered accurately from a small number of linear measurements using a sparsity‐promoting regularization. This paper investigates two aspects of compressed sensing in seismic exploration: (i) using a general non‐convex regularizer instead of the conventional one‐norm minimization for sparsity promotion and (ii) using a frequency mask to additionally subsample the acquired traces in the frequency‐space () domain. The proposed non‐convex regularizer has better sparse recovery performance compared with one‐norm minimization and the additional frequency mask allows us to incorporate a priori information about the events contained in the wavefields into the reconstruction. For example, (i) seismic data are band‐limited; therefore one can use only a partial set of frequency coefficients in the range of reflections band, where the signal‐to‐noise ratio is high and spatial aliasing is low, to reconstruct the original wavefield, and (ii) low‐frequency characteristics of the coherent ground rolls allow direct elimination of them during reconstruction by disregarding the corresponding frequency coefficients (usually bellow 10 Hz) via a frequency mask. The results of this paper show that some challenges of reconstruction and denoising in seismic exploration can be addressed under a unified formulation. It is illustrated numerically that the compressed sensing performance for seismic data interpolation is improved significantly when an additional coherent subsampling is performed in the domain compared with the domain case. Numerical experiments from both simulated and real field data are included to illustrate the effectiveness of the presented method.  相似文献   

20.
Pre‐stack seismic data are indicative of subsurface elastic properties within the amplitude versus offset characteristic and can be used to detect elastic rock property changes caused by injection. We perform time‐lapse pre‐stack 3‐D seismic data analysis for monitoring sequestration at Cranfield. The time‐lapse amplitude differences of Cranfield datasets are found entangled with time‐shifts. To disentangle these two characters, we apply a local‐correlation‐based warping method to register the time‐lapse pre‐stack datasets, which can effectively separate the time‐shift from the time‐lapse seismic amplitude difference without changing the original amplitudes. We demonstrate the effectiveness of our registration method by evaluating the inverted elastic properties. These inverted time‐lapse elastic properties can be reliably used for monitoring plumes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号