首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
KEITH BEVEN 《水文研究》1997,11(9):1069-1085
TOPMODEL (a TOPography based hydrological MODEL) is now 20 years old and has been the subject of numerous applications to a wide variety of catchments. This paper represents a critical review of some of the issues involved in application of the TOPMODEL concepts, including the basic assumptions involved; the derivation of topographic index distributions from digital terrain data; additional model components; meaning and calibration of the model parameters; and issues involved in model validation and predictive uncertainty. The aim is to provoke a thoughtful approach to hydrological modelling and the interaction of modelling and field work. Some recommendations are made for future modelling practice. © 1997 John Wiley & Sons, Ltd.  相似文献   

2.
An extension of TOPMODEL was developed for rainfall–runoff simulation in agricultural watersheds equipped with tile drains. Tile drain functions are incorporated into the framework of TOPMODEL. Nine possible flow generation scenarios are suggested for tile-drained watersheds and applied in the modelling procedure. In the model development, two methods of simulation of the flow in the unsaturated zone were compared: the traditional, physically based storage approach and a new approach using a transfer function. A regionalized sensitivity analysis was used to determine the sensitivity of parameters and to compare the behaviour of the transfer function with that of the simple storage-related formulation. The number of accepted combinations of parameter values, on average, was higher for the transfer function approach than when using a Monte Carlo method of parameter estimation. Since the rainfall–runoff response pattern tends to vary seasonally, seven events distributed throughout a year were used in the sensitivity analysis to investigate the seasonal variation of the hydrological characteristics. © 1997 John Wiley & Sons, Ltd.  相似文献   

3.
《水文科学杂志》2013,58(5):886-898
Abstract

Temporal resolution of rainfall plays an important role in determining the hydrological response of river basins. Rainfall temporal variability can be considered as one of the most critical elements when dealing with input data of rainfall—runoff models. In this paper, a typical lumped rainfall—runoff model is applied to long- and short-term runoff prediction using rainfall data sets with different temporal resolution, including daily, hourly and 10-min interval data, and the dependency of model performance on the time interval of the rainfall data is discussed. Furthermore, the effect of temporal resolution on model parameter values is analysed. As results, rainfall data with shorter temporal resolution provide better performance in short-term river discharge estimation, especially for storm discharge estimation. The most accurate results are obtained on the peak discharge and recession part of the hydrograph by using 10-min interval rainfall data. It is concluded that model parameter values are influenced not only by the temporal resolution of calculation but also by the rainfall intensity—duration relationship. This study provides useful information about determination of hydrological model parameters using data of different temporal resolutions.  相似文献   

4.
Selecting the correct resolution in distributed hydrological modelling at the watershed scale is essential in reducing scale-related errors. The work presented herein uses information content (entropy) to identify the resolution which captures the essential variability, at the watershed scale, of the infiltration parameters in the Green and Ampt infiltration equation. A soil map of the Little Washita watershed in south-west Oklahoma, USA was used to investigate the effects of grid cell resolution on the distributed modelling of infiltration. Soil-derived parameters and infiltration exhibit decreased entropy as resolutions become coarser. This is reflected in a decrease in the maximum entropy value for the reclassified/derived parameters vis a vis the original data. Moreover, the entropy curve, when plotted against resolution, shows two distinct segments: a constant section where no entropy was lost with decreasing resolution and another part which is characterized by a sharp decrease in entropy after a critical resolution of 1209 m is reached. This methodology offers a technique for assessing the largest cell size that captures the spatial variability of infiltration parameters for a particular basin. A geographical information system (GIS) based rainfall-runoff model is used to simulate storm hydrographs using infiltration parameter maps at different resolutions as inputs. Model results up to the critical resolution are reproducible and errors are small. However, at resolutions beyond the critical resolution the results are erratic with large errors. A major finding of this study is that a large resolution (1209 m for this basin) yields reproducible model results. When modelling a river basin using a distributed model, the resolution (grid cell size) can drastically affect the model results and calibration. The error structure attributable to grid cell resolution using entropy as a spatial variability measure is shown.  相似文献   

5.
In this study, we evaluate uncertainties propagated through different climate data sets in seasonal and annual hydrological simulations over 10 subarctic watersheds of northern Manitoba, Canada, using the variable infiltration capacity (VIC) model. Further, we perform a comprehensive sensitivity and uncertainty analysis of the VIC model using a robust and state-of-the-art approach. The VIC model simulations utilize the recently developed variogram analysis of response surfaces (VARS) technique that requires in this application more than 6,000 model simulations for a 30-year (1981–2010) study period. The method seeks parameter sensitivity, identifies influential parameters, and showcases streamflow sensitivity to parameter uncertainty at seasonal and annual timescales. Results suggest that the Ensemble VIC simulations match observed streamflow closest, whereas global reanalysis products yield high flows (0.5–3.0 mm day−1) against observations and an overestimation (10–60%) in seasonal and annual water balance terms. VIC parameters exhibit seasonal importance in VARS, and the choice of input data and performance metrics substantially affect sensitivity analysis. Uncertainty propagation due to input forcing selection in each water balance term (i.e., total runoff, soil moisture, and evapotranspiration) is examined separately to show both time and space dimensionality in available forcing data at seasonal and annual timescales. Reliable input forcing, the most influential model parameters, and the uncertainty envelope in streamflow prediction are presented for the VIC model. These results, along with some specific recommendations, are expected to assist the broader VIC modelling community and other users of VARS and land surface schemes, to enhance their modelling applications.  相似文献   

6.
Hydrological models demand large numbers of input parameters, which are to be optimally identified for better simulation of various hydrological processes. Identifying the most relevant parameters and their values using efficient sensitivity analysis methods helps to better understand model performance. In this study, the physically-based distributed model SHETRAN is used for hydrological simulation on the Netravathi River Basin in south India and the most important parameters are identified using the Morris screening method. Further, the influence of a particular model parameter on streamflow is quantified using local sensitivity analysis and optimal parameters are obtained for calibration of the SHETRAN model. The results demonstrate the capability of two-stage sensitivity analysis, combining qualitative and quantitative methods in the initial screening-out of insignificant model parameters, identifying parameter interactions and quantifying the contribution of each model parameter to the streamflow. The results of the sensitivity analysis simplified the calibration procedure of SHETRAN for the study area.  相似文献   

7.
Hydrological models at a monthly time‐scale are important tools for hydrological analysis, such as in impact assessment of climate change and regional water resources planning. Traditionally, monthly models adopt a conceptual, lumped‐parameter approach and cannot account for spatial variations of basin characteristics and climatic inputs. A large requirement for data often severely limits the utility of physically based, distributed‐parameter models. Based on the variable‐source‐area concept, we considered basin topography and rainfall to be two major factors whose spatial variations play a dominant role in runoff generation and developed a monthly model that is able to account for their influences in the spatial and temporal dynamics of water balance. As a hybrid of the Xinanjiang model and TOPMODEL, the new model is constructed by innovatively making use of the highly acclaimed simulation techniques in the two existing models. A major contribution of this model development study is to adopt the technique of implicit representation of soil moisture characteristics in the Xinanjiang model and use the TOPMODEL concept to integrate terrain variations into runoff simulation. Specifically, the TOPMODEL topographic index ln(a/tanβ) is converted into an index of relative difficulty in runoff generation (IRDG) and then the cumulative frequency distribution of IRDG is used to substitute the parabolic curve, which represents the spatial variation of soil storage capacity in the Xinanjiang model. Digital elevation model data play a key role in the modelling procedures on a geographical information system platform, including basin segmentation, estimation of rainfall for each sub‐basin and computation of terrain characteristics. Other monthly data for model calibration and validation are rainfall, pan evaporation and runoff. The new model has only three parameters to be estimated, i.e. watershed‐average field capacity WM, pan coefficient η and runoff generation coefficient α. Sensitivity analysis demonstrates that runoff is least sensitive to WM and, therefore, it can be determined by a prior estimation based on the climate and soil properties of the study basin. The other two parameters can be determined using optimization methods. Model testing was carried out in a number of nested sub‐basins of two watersheds (Yuanjiang River and Dongjiang River) in the humid region in central and southern China. Simulation results show that the model is capable of describing spatial and temporal variations of water balance components, including soil moisture content, evapotranspiration and runoff, over the watershed. With a minimal requirement for input data and parameterization, this terrain‐based distributed model is a valuable contribution to the ever‐advancing technology of hydrological modelling. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

8.
The contribution discusses the problems with modelling design floods for water structures. The statistical extrapolations of observed flood series of, for example, 80 years “only” to the annual exceedance probability AEP = 0.01 is difficult due to the large variability in extreme values. For large dams, however, the AEP = 0.001 or 0.0001 is required. Most of the uncertainties in hydrological modelling are epistemic (uncertainties in model structure, model parameters, inputs, calibration data, and in measurements) and moreover some measurements can be disinformative. With powerful computers, it is now possible to produce very long series (100 to100,000 years in hourly time step) using precipitation and temperatures computed with a weather model. Within the framework of the Generalised Likelihood Uncertainty Estimation (GLUE) many (thousands) of such continuous simulations are produced and compared to the observed historical data. According to Keith Beven's Manifesto for the equifinality thesis the differences between modelled and observed values should not be larger than some limits of acceptability based on what is known about errors in the input and output observations used for model evaluation (e.g., for flow the current metering data are used). The unacceptable realisations are rejected. We have been working with the frequency version of TOPMODEL in various versions according to the unique characteristics of each catchment. Design hydrographs for water structures are then extracted from the acceptable realisations. The continuous simulation with uncertainty estimation seems nowadays the most promising method of computing design hydrographs for important water structures, even if issues associated with epistemic uncertainty of model assumptions remain.  相似文献   

9.
ABSTRACT

Flood peaks and volumes are essential design variables and can be simulated by precipitation–runoff (P–R) modelling. The high-resolution precipitation time series that are often required for this purpose can be generated by various temporal disaggregation methods. Here, we compare a simple method (M1, one parameter), focusing on the effective precipitation duration for flood simulations, with a multiplicative cascade model (M2, 32/36 parameters). While M2 aims at generating realistic characteristics of precipitation time series, M1 aims only at accurately reproducing flood variables by P–R modelling. Both disaggregation methods were tested on precipitation time series of nine Swiss mesoscale catchments. The generated high-resolution time series served as input for P–R modelling using a lumped HBV model. The results indicate that differences identified in precipitation characteristics of disaggregated time series vanish when introduced into the lumped hydrological model. Moreover, flood peaks were more sensitive than flood volumes to the choice of disaggregation method.  相似文献   

10.
Surface runoff plays an important role in contaminant transport, nutrient loss, soil erosion and peak discharges in streams and rivers. Because it is the result of a variety of complex hydrological processes, estimating surface runoff using physically based hydrological models is challenging. Upscaling of physical soil properties is necessary to cope with the limits of computational power in surface runoff modelling. In flat landscapes, the (micro)topographic surface controls the onset and progression of surface runoff on saturated soils during rain events. Therefore, its proper representation is crucial when attempting to model and predict surface runoff. In this study, the influence of microtopography (centimetre scale) on estimations of maximum depression storage (MDS), random roughness (RR) and the connectivity threshold (CT) is explored. These properties are selected because they often serve as surface runoff indicators in hydrological modelling. To characterize microtopography, a terrestrial laser scanner (TLS) is used to generate a digital terrain model (DTM) of the study site with a horizontal spatial resolution of 5 cm. MDS, RR and CT are then calculated and compared to the values generated from the publicly available Dutch national DTM dataset with a resolution of 50 cm. Our results show considerable differences in MDS, RR and CT when calculated for the different input resolution datasets. Using DTMs that do not sufficiently capture microtopography leads to underestimation of MDS and RR, and to overestimation of CT. Our findings indicate that surface runoff indicators, and thereby the surface runoff response of a saturated surface to rainfall events, are defined at scales smaller than the scales of typically available DTMs. Understanding surface runoff through modelling studies therefore requires a framework that accounts for this lack of information arising from using coarser resolution DTMs. We demonstrate a linear relationship between MDS values generated from the different resolution DTMs. This opens the possibility of using empirical scaling relationships between high- and lower-resolution DTMs to account for microtopography. Repetition of our measurements on similar surfaces would contribute to establishing such empirical scaling relationships. Our results should be seen as indicative of flat landscapes and surfaces where centimetre scale microtopography is relevant.  相似文献   

11.
Hydrological modelling is an important tool for research, policy, and management, but uncertainty remains about parameters transferability from field observations made at small scale to models at the catchment scale and larger. This uncertainty compels the need to develop parameter relationships that are translatable across scale. In this study, we compare the changes to modelled processes as resolution is coarsened from 100‐m to 1‐km in a topographically complex, 255‐km2 Colorado River headwater catchment. We conducted a sensitivity analysis for hydraulic conductivity (K) and Manning's n parameters across four orders of magnitude. Results showed that K acts as a moderator between surface and subsurface contributions to streamflow, whereas n moderates the duration of high intensity, infiltration‐excess flow. The parametric sensitivity analysis informed development of a new method to scale effective hydraulic conductivity across modelling resolutions in order to compensate for the loss of topographic gradients as resolution is coarsened. A similar mathematical relationship between n and lateral resolution changes was not found, possibly because n is also sensitive to time discretization. This research provides an approach to translate hydraulic conductivity parameters from a calibrated coarse model to higher resolutions where the number of simulations are limited by computational demand.  相似文献   

12.
This paper analyses the significance of the entropy concept in the topography parameterization within the model TOPMODEL proposed by Beven and Kirkby (1979), by means of the hydrological behaviour of an experimental basin in southern Italy. For a significant number of flood events recorded at the basin outlet, the performance of TOPMODEL for different spatial distributions of the topographic index, ln(a/tan β), has been observed. Performance is related to the information content estimated as an entropy measure, corresponding to each of the spatial distributions of the topographic index, with the aim of identifying the procedures most suitable to represent the hydrological process of rainfall–runoff. The results obtained have shown that for flood events corresponding to brief, heavy precipitation, some procedures provide better performances than others. Moreover, these improvements are justified by greater information content in the corresponding spatial distributions of the topographic index. Finally, TOPMODEL performances for some procedures have been analysed, varying the resolution scale of the topographic index. For analogous hydrological performances, scale change produced variations in some of the subsurface hydraulic parameters. These variations were proportional to a spatial variability measure of the topographic index distribution, derived from the corresponding information content. © 1997 John Wiley & Sons, Ltd.  相似文献   

13.
Bias correction methods are usually applied to climate model outputs before using these outputs for hydrological climate change impact studies. However, the use of a bias correction procedure is debatable, due to the lack of physical basis and the bias nonstationarity of climate model outputs between future and historical periods. The direct use of climate model outputs for impact studies has therefore been recommended in a few studies. This study investigates the possibility of using reanalysis‐driven regional climate model (RCM) outputs directly for hydrological modelling by comparing the performance of bias‐corrected and nonbias‐corrected climate simulations in hydrological simulations over 246 watersheds in the Province of Québec, Canada. When using RCM outputs directly, the hydrological model is specifically calibrated using RCM simulations. Two evaluation metrics (Nash–Sutcliffe efficiency [NSE] and transformed root mean square error [TRMSE]) and three hydrological indicators (mean, high, and low flows) are used as criteria for this comparison. Two reanalysis‐driven RCMs with resolutions of 45 km and 15 km are used to investigate the scale effect of climate model simulations and bias correction approaches on hydrology modelling. The results show that nonbias‐corrected simulations perform better than bias‐corrected simulations for the reproduction of the observed streamflows when using NSE and TRMSE as criteria. The nonbias‐corrected simulations are also better than or comparable with the bias‐corrected simulations in terms of reproducing the three hydrological indicators. These results imply that the raw RCM outputs driven by reanalysis can be used directly for hydrological modelling with a specific calibration of hydrological models using these datasets when gauged observations are scarce or unavailable. The nonbias‐corrected simulations (at a minimum) should be provided to end users, along with the bias‐corrected ones, especially for studying the uncertainty of hydrological climate change impacts. This is especially true when using an RCM with a high resolution, since the scale effect is observed when the RCM resolution increases from a 45‐km to a 15‐km scale.  相似文献   

14.
ABSTRACT

This paper evaluates the sensitivity of hydrological projections to the choice of potential evapotranspiration formulas on two natural sub-catchments, in Canada and Germany. Twenty-four equations, representing a large range of options, are applied for calibration over the whole observation time series and for future conditions. The modelling chain is composed of dynamically downscaled climatic projections and a 20-member (ensemble) hydrological model, along with a snow module. The roots of the sensitivity and its propagation within the hydrological chain are evaluated to show influences on climate change impact conclusions. Results show large differences between the 24 simulated potential evapotranspiration time series. However, these discrepancies only moderately affect the calibration efficiency of hydrological models as a result of adaptation of parameters. Choice of formula influences hydrological projections and climate change conclusions for both catchments in terms of simulated and projected values, and also in the magnitude of changes during important dynamic periods such as spring and autumn high flows and summer low flows. Spread of the hydrological response is lower for the combinational formulas than for temperature-based or radiation-based equations. All the results reveal the importance of testing a large spectrum of potential evapotranspiration formulas in a decision-making context, such as water resources management.  相似文献   

15.
The emergence of regional and global satellite‐based rainfall products with high spatial and temporal resolution has opened up new large‐scale hydrological applications in data‐sparse or ungauged catchments. Particularly, distributed hydrological models can benefit from the good spatial coverage and distributed nature of satellite‐based rainfall estimates (SRFE). In this study, five SRFEs with temporal resolution of 24 h and spatial resolution between 8 and 27 km have been evaluated through their predictive capability in a distributed hydrological model of the Senegal River basin in West Africa. The main advantage of this evaluation methodology is the integration of the rainfall model input in time and space when evaluated at the sub‐catchment scale. An initial data analysis revealed significant biases in the SRFE products and large variations in rainfall amounts between SRFEs, although the spatial patterns were similar. The results showed that the Climate Prediction Center/Famine Early Warning System (CPC‐FEWS) and cold cloud duration (CCD) products, which are partly based on rain gauge data and produced specifically for the African continent, performed better in the modelling context than the global SRFEs, Climate Prediction Center MORPHing technique (CMORPH), Tropical Rainfall Measuring Mission (TRMM) and Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN). The best performing SRFE, CPC‐FEWS, produced good results with values of R2NS between 0·84 and 0·87 after bias correction and model recalibration. This was comparable to model simulations based on traditional rain gauge data. The study highlights the need for input specific calibration of hydrological models, since major differences were observed in model performances even when all SRFEs were scaled to the same mean rainfall amounts. This is mainly attributed to differences in temporal dynamics between products. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

16.
Vahid Nourani  Akira Mano 《水文研究》2007,21(23):3173-3180
Rainfall–runoff modelling, as a surface hydrological process, on large‐scale data‐poor basins is currently a major topic of investigation that requires the model parameters be identified by using basin physical characteristics rather than calibration. This paper describes the application of the TOPMODEL framework accompanied by a kinematic wave model to the Karun River sub‐basins in southwestern Iran with just one conceptual parameter for calibration. ISLSCP1, HYDRO1K and Reynolds data sets are presented in a geographical information system and used as data sources for meteorological information, hydrological features and soil characteristics of the study area respectively. The results show that although the model developed can adequately predict flood runoff in the catchment with only one calibrated parameter, it is suggested that the effect of surface reservoirs be considered in the proposed model. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

17.
  相似文献   

18.
The MATLAB SIMULINK programming language is applied to the TOPMODEL rainfall–runoff model. SIMULINK requires a good recognition of model dynamics, which has been achieved here in a version based on the first TOPMODEL (Beven and Kirkby, 1979). Introducing the topographic index distribution in a vector form allows the generalization and simplification of the SIMULINK structure. The SIMULINK version of TOPMODEL has a very easy to understand graphical representation, which shows, in a straightforward way, all the physical interactions that take place in the model. Moreover, owing to its modular structure it is easy to add new and/or develop old submodels, depending on the available data and the goal of the modelling. In the example given here TOPMODEL was extended by two submodels representing the soil moisture and evaporation distribution in the catchment. Preparation of the data and presentation of the results is done in MATLAB. Discharge predictions and spatial patterns of hydrological response are demonstrated for a separate validation period. © 1997 John Wiley & Sons, Ltd.  相似文献   

19.
Precipitation time series with high temporal resolution are desired for hydrological modelling and flood studies. Yet the choice of an appropriate resolution is not straightforward because the use of too high a temporal resolution increases the data requirements, computational costs and, presumably, associated uncertainty, while performance improvement may be indiscernible. In this study, the effect of averaging hourly precipitation on model performance and associated uncertainty is investigated using two data sources: station network precipitation (SNP) and radar-based precipitation (RBP). From these datasets, time series of different temporal resolutions were generated, and runoff was simulated for 13 pre-alpine catchments with a bucket-type model. Our results revealed that different temporal resolutions were required for an acceptable model performance depending on the catchment size and data source. These were 1–12 h for small (16–59 km2), 3-21 h for medium (60–200 km2), and 24 h for large (200–939 km2) catchments.  相似文献   

20.
Jia Liu  Michaela Bray  Dawei Han 《水文研究》2012,26(20):3012-3031
Accurate information of rainfall is needed for sustainable water management and more reliable flood forecasting. The advances in mesoscale numerical weather modelling and modern computing technologies make it possible to provide rainfall simulations and forecasts at increasingly higher resolutions in space and time. However, being one of the most difficult variables to be modelled, the quality of the rainfall products from the numerical weather model remains unsatisfactory for hydrological applications. In this study, the sensitivity of the Weather Research and Forecasting (WRF) model is investigated using different domain settings and various storm types to improve the model performance of rainfall simulation. Eight 24‐h storm events are selected from the Brue catchment, southwest England, with different spatial and temporal distributions of the rainfall intensity. Five domain configuration scenarios designed with gradually changing downscaling ratios are used to run the WRF model with the ECMWF 40‐year reanalysis data for the periods of the eight events. A two‐dimensional verification scheme is proposed to evaluate the amounts and distributions of simulated rainfall in both spatial and temporal dimensions. The verification scheme consists of both categorical and continuous indices for a first‐level assessment and a more quantitative evaluation of the simulated rainfall. The results reveal a general improvement of the model performance as we downscale from the outermost to the innermost domain. Moderate downscaling ratios of 1:7, 1:5 and 1:3 are found to perform better with the WRF model in giving more reasonable results than smaller ratios. For the sensitivity study on different storm types, the model shows the best performance in reproducing the storm events with spatial and temporal evenness of the observed rainfall, whereas the type of events with highly concentrated rainfall in space and time are found to be the trickiest case for WRF to handle. Finally, the efficiencies of several variability indices are verified in categorising the storm events on the basis of the two‐dimensional rainfall evenness, which could provide a more quantitative way for the event classification that facilitates further studies. It is important that similar studies with various storm events are carried out in other catchments with different geographic and climatic conditions, so that more general error patterns can be found and further improvements can be made to the rainfall products from mesoscale numerical weather models. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号