共查询到20条相似文献，搜索用时 15 毫秒
1.
The problem of rapid environmental assessment in a range-dependent environment is addressed. For rapid assessment, the exact geoacoustic parameters are not required, nor is it a requirement that the exact structure of the acoustic field (location of peaks and s) be matched by an acoustic prediction model. The parameters that are relevant are the overall transmission loss (incoherent TL), the time spread (/spl tau/), and the slopes of the range/frequency interference patterns (/spl beta/, the waveguide invariant). The rapid geoacoustic characterization algorithm uses a homogeneous single-sediment layer overlying a hard acoustic basement model to optimally match the predicted acoustic observables with those estimated from data. The approach is presented here and is applied to the range-dependent benchmark cases TC1 and TC2 from the Inversion Techniques Workshop held in Gulfport, MS, in May 2001. The technique successfully reproduces the acoustic observables and estimates the sediment sound-speed, density, and attenuation profiles, as well as the sediment thickness. 相似文献
2.
现行黄河口水下三角洲海底形貌及不稳定性 总被引：4，自引：0，他引：4
杨作升 G.H.Keller 陆念祖 D.B.Prior 林天充 B.D.Bornhold 许卫东 L.D.Wright J.Suhayda 曹立华 W.J.Wisenman 《中国海洋大学学报(自然科学版)》1990,(1)
高分辨力的声学仪器调查表明,现行黄河口水下三角洲海底的形貌十分复杂,由于高浓度巨量黄河泥沙快速沉积的结果,使河口底坡出现了大量的不稳定性现象,如塌陷冲沟,高密度沉积物重力流,切割—充填结构海底,V形水下河谷、滑塌等。根据海底扰动程度作了分区,划分了地形单元,并对不同的海底形态的成因作了分析。比较了1985和1986年两个航次考查结果的变动,分析了原因。 相似文献
3.
Long-range sidescan sonar can be used to map sediment distributions over wide expanses of deep ocean floor. Seven acoustic facies that arise from differing sediment or rock types have been mapped over the low-relief Saharan continental rise and Madeira abyssal plain. These have been calibrated with sampling, profiling and camera studies and the facies can be traced confidently on a regional scale using the sidescan data. The mapping of the sediment distribution shows that a complex interplay of turbidity current and debris flow processes can occur at a continental rise/abysaal plain transition over 1000 km from the nearest continental slope. 相似文献
4.
5.
6.
The northwest Hatton Bank margin is an ideal locality to demonstrate the interaction between bottom currents and slope configuration in controlling the distribution and morphology of bottom current deposits. The slope area investigated is isolated from any major terrigenous sediment supply and at present is influenced by the Deep Northern Boundary Current (DNBC). Swath bathymetry and high resolution acoustic data allow us to evaluate both local and regional controls on slope sedimentation and the possible mechanisms for bottom-current velocity variability across a slope setting within the NW European continental margin. The slope exhibits sculpting by bottom currents that flow in a predominantly southwest to northeast direction, and is only locally modified by slope failures. Positive relief features such as the Endymion Spur play an important role in constraining and accelerating bottom-current flow and, consequently, in redistributing sediment along the margin. We demonstrate that the size, morphology and distribution of bottom-current deposits along the slope vary as a function of the interaction between bottom currents, regional slope orientation and local seafloor topography. 相似文献
7.
Study of A Geo-Acoustic Model of Gas-Bearing Sediment and Its Application in Sediment with Low Acoustic Veloctiy 总被引：2，自引：0，他引：2
A new geo-acoustic model for gas-bearing sediment is proposed based on the work of Dvorkin and Prasad, and Biot theory. Only five geophysical parameters: sediment mineral composition, free gas saturation, tortuosity (also known as the structure factor), permeability, and porosity, are considered in the model. A benefit of this model is that we need only five parameters instead of ten parameters in the Biot's formulas for acoustic velocity and attenuation calculation. Here the model is demonstrated with the in-situ experimental data collected from the Hangzhou Bay, China. The results of this study suggest that free gas content in sediment is the most critical condition resulting in a low acoustic velocity (compressional wave). The respective contributions of the other four parameters in the model are also discussed. 相似文献
8.
Shallow-water bottom reverberation measurements 总被引：2，自引：0，他引：2
Stanic S. Goodman R.R. Briggs K.B. Chotiros N.P. Kennedy E.T. 《Oceanic Engineering, IEEE Journal of》1998,23(3):203-210
High-frequency bottom reverberation measurements were made at an experimental site in the Gulf of Mexico. The acoustic data were taken as a function of frequency (40-180 kHz) and grazing angle (40-33°). The measured acoustic reverberation results are compared to predictions made by models developed by Jackson et al. (1986, 1996) and Boyle and Chotiros (1995). The models used inputs from the analysis of sediment cores and stereophotography. The model predictions show differences from each other and from the data. The results show reverberation-level variabilities as a function of frequency that cannot be accurately predicted by these models 相似文献
9.
The results of continuous seismic profiling thermodynamics performed in the northern part of the Japan Basin in the region of the Tarasov Rise and the data of a micropaleontological examination of the diatom remains encountered in the sediment samples from the rise and continental slope are presented. In the area studied, the topography of the acoustic basement features a vast rise (plateau) buried under the sedimentary cover outlined by the depth contour 5.8 s. The plateau has a relatively smooth top surface crossed by a series of rises of the acoustic basement. The two largest rises are represented by the ridges of the Tarasov Rise. The plateau is separated from the continental slope by a depression in the acoustic basement with a depth up to 6.8 s. From the end of the Middle Miocene up to the beginning of the Paleocene, the region of the plateau represented an area of active volcanism; it coincided in time with the stage of subsidence of the floor of the acoustic basement depression. At the end of the Late Miocene, the ridges of the Tarasov Rise started to sink. In the Pliocene, this process accelerated, and, at the beginning of the Pleistocene, it stopped. In the Middle Miocene-Early Pleistocene time, the portion of the continental slope adjacent to the plateau remained stable and suffered no significant vertical movements. 相似文献
10.
作者采用浊度计和声学多普勒流速剖面仪(ADCP)在近海区域连续、定点观测的应用中,利用浊度与悬沙浓度之间良好的线性关系,对潮汐半月周期内的浊度和ADCP后向散射声强数据进行相关性分析,讨论了小、中、大潮期间利用ADCP后向散射声强反演悬沙浓度的可靠性,反演过程中综合考虑了声学近场非球面扩散和本底噪声的影响。结果表明,在实验海域中,小潮情况下,各水层内悬浮泥沙成分较为稳定,ADCP后向散射声强与浊度变化相关性较高,达到0.91;而在大潮情况下,ADCP后向散射声强与浊度变化的相关性降低,悬沙浓度及成分容易在海流的影响下发生变化。 相似文献
11.
A newly developed marine electromagnetic (E-M) system was used to create apparent porosity maps of the uppermost 20 m of sediments on the seafloor. Measurements of electrical conductivity were interpreted to give the porosity of the bottom sediments and underlying units. The data were collected continuously in a surveying mode using two receivers at different spacings to improve the resolution of porosity as a function of depth. The variations in apparent porosity over the area correlate well with information obtained from cores and acoustic profiles.
Acoustic profiles indicated the presence of biogenic gas in the central region of the survey area. The absence of distinct changes in apparent porosity over regions of gas allows us to conclude that the concentration of gas trapped within the Queen Charlotte muds does not exceed about 4% of the sediment by volume if we assume that the gas displaces fluid in the sediment.
A buried, lower porosity layer was detected, its position reflecting changes in the depth to the glaciomarine layer. Mapped variations in apparent porosity are well correlated with features on the acoustic record. This illustrates the system's ability to obtain continuous profiles of apparent porosity over seafloor features. The marine E-M survey provided rapid areal coverage, and, combined with the acoustic profiles, information on the porosity of deeper units. 相似文献
12.
13.
14.
This paper describes a system that has been developed to measure compressional wave speed in cored marine sediments onboard ship. The structure enables one to secure an extruded core sample to its base and to move acoustic probes to a desired location, implant them to a specified depth into the sample and perform the measurement. The acoustic measurement system is a pulse-time delay system measuring time difference over a fixed path length and the temperature of the sediment. The time difference and temperature measurement systems are comprised of task oriented components and are housed in a single portable box. The system is adaptable to the various sample sizes obtained with the coring apparatus presently in use. Initial field tests indicate that ship motion has no effect on the system. Data collected from cores has been classified according to sediment type and displays good agreement with data presented by Hamilton (1970). The difference in compressional wave velocity, based on sediment type, for the two studies is 5 m per sec. 相似文献
15.
Gassy sediments are detectable acoustically in subbottom profiles of Canada's Fraser Delta slope and prodelta areas. Interstitial gas is typically represented by zones of acoustic turbidity on high-resolution seismic profiles and by gas brightening on air-gun profiles. The top of the acoustically turbid zone is generally highest within the sediment column closest to the river mouths and lies within 10 ms (two-way travel time) of the sea floor in a nearly continuous area that covers over 530 km2. Most of the gas is believed to be biogenic in origin, although thermogenic gas derived from underlying Tertiary sedimentary rocks may be present in places. 相似文献
16.
A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord. 相似文献
17.
Evangelos Alevizos Mirjam Snellen Dick Simons Kerstin Siemes Jens Greinert 《Marine Geophysical Researches》2018,39(1-2):289-306
This study applies three classification methods exploiting the angular dependence of acoustic seafloor backscatter along with high resolution sub-bottom profiling for seafloor sediment characterization in the Eckernförde Bay, Baltic Sea Germany. This area is well suited for acoustic backscatter studies due to its shallowness, its smooth bathymetry and the presence of a wide range of sediment types. Backscatter data were acquired using a Seabeam1180 (180 kHz) multibeam echosounder and sub-bottom profiler data were recorded using a SES-2000 parametric sonar transmitting 6 and 12 kHz. The high density of seafloor soundings allowed extracting backscatter layers for five beam angles over a large part of the surveyed area. A Bayesian probability method was employed for sediment classification based on the backscatter variability at a single incidence angle, whereas Maximum Likelihood Classification (MLC) and Principal Components Analysis (PCA) were applied to the multi-angle layers. The Bayesian approach was used for identifying the optimum number of acoustic classes because cluster validation is carried out prior to class assignment and class outputs are ordinal categorical values. The method is based on the principle that backscatter values from a single incidence angle express a normal distribution for a particular sediment type. The resulting Bayesian classes were well correlated to median grain sizes and the percentage of coarse material. The MLC method uses angular response information from five layers of training areas extracted from the Bayesian classification map. The subsequent PCA analysis is based on the transformation of these five layers into two principal components that comprise most of the data variability. These principal components were clustered in five classes after running an external cluster validation test. In general both methods MLC and PCA, separated the various sediment types effectively, showing good agreement (kappa >0.7) with the Bayesian approach which also correlates well with ground truth data (r2?>?0.7). In addition, sub-bottom data were used in conjunction with the Bayesian classification results to characterize acoustic classes with respect to their geological and stratigraphic interpretation. The joined interpretation of seafloor and sub-seafloor data sets proved to be an efficient approach for a better understanding of seafloor backscatter patchiness and to discriminate acoustically similar classes in different geological/bathymetric settings. 相似文献
18.
A high-resolution acoustic survey over a fjord side fan delta revealed distinctive bottom features resulting from slope instability processes. Delta-front chutes occurring on slopes of l3° are partially filled with radiating splays of coarse-grained sediment, apparently transported downslope by coarse-grained debris flows that originated on the subaerial slopes above the fan. Arcuate scarp patterns represent shallow successive, rotational slides, with numcrous small displacements of individual blocks and slabs of sediment. Blocky, ridged depositional areas occur at the base of the fan delta, but there is no evidence of long-distance mass movement farther downfjord. 相似文献
19.
David Hurther Peter D. Thorne Mickaël Bricault Ulrich Lemmin Jean-Marc Barnoud 《Coastal Engineering》2011
The use of acoustics to measure sediment transport boundary layer processes has gained increasing acceptance over the past two decades. This has occurred through the development of increasingly sophisticated measuring systems and theoretical developments, which have enabled flow and suspended sediment parameters to be obtained from acoustic data with a high degree of accuracy. Until relatively recently, separate acoustic systems were used to measure flow and suspended sediment concentration. Over the past few years, however, the technology has become sufficiently advanced so that flow and sediment measurements can be integrated into a single system. This integration provides, quasi-instantaneous, non-intrusive, co-located, high temporal-spatial resolution measurements of benthic flow and sediment processes. Here the development of such an instrument, the Acoustic Concentration and Velocity Profiler (ACVP) is described. The theory underpinning its application is outlined, new approaches to velocity de-aliasing and suspended sediment inversion instabilities using multi-frequency capabilities are presented and the application of the system to sediment transport processes over a sandy ripple bed is illustrated. The observations clearly show the value of such instrumentation for studying the dynamical interaction between the bed, the flow and the sediments at and within the bottom boundary layer. 相似文献
20.
基于台湾以东黑潮主流系沉积物中碳、氮、磷等生源要素指标的变化，在沉积物年代学的基础上，探讨了近千年来气候环境变化在黑潮沉积物中的历史记录。结果表明，近千年来台湾以东、琉球岛弧南侧斜坡的黑潮主流区平均沉积速率可达34.2 cm/ka，据其变化可大致分成的3个沉积阶段，与中世纪暖期、小冰期和现代暖期的划分基本一致。沉积物中碳以无机碳为主，总无机碳（TIC）的含量从1850年开始逐渐增大并伴随剧烈波动，恰好与大气CO2水平的快速升高相对应；总有机碳（TOC）含量的变化则与东亚夏季风强度的变化关系密切，在夏季风较弱的小冰期其含量明显高于夏季风较强的中世纪暖期和现代暖期，这是由于较弱的夏季风有利于亚洲大陆风尘的产生和向海输送，从而促进了研究海域的初级生产力。1850年以来，沉积物中的C∶N∶P逐渐从低于转变为高于Redfield比，反映了上层水体营养盐结构从氮缺乏到氮充足的转变，这与近现代以来急剧增加的全球氮排放密切相关。总体来说，黑潮主流系沉积物中的生源要素指标，明确记录和响应了近千年来的气候环境变化，尤其是近150多年以来不断加剧的人类活动所造成的气候环境剧变。 相似文献