共查询到20条相似文献，搜索用时 765 毫秒
1.
Carlin-style gold deposits are widely distributed in Southwestern Guizhou, China. Research has dominantly focused on deposit-scale geology and structural control of mineralization. The relationship between the gold deposits and regional structures, in particular their control on the formation and distribution of those deposits is less well understood. Here we use seismic survey and gravity data to reveal the basin-scale structure control of the gold deposits in central Southwestern Guizhou. The seismic reflection profiles show strong reflection horizons including Upper Permian coal measures, and Dongwu and Guangxi unconformities. The seismic data provide important evidence of the basinal structural style and the relationship between fault-related folding and the Carlin-style gold deposits. Regional gravity data also revealed several paleo-uplifts, which appear to control the distribution of Carlin-style gold deposits.The Carlin-style gold deposits are spatially and temporally associated with fault-related folds. Based on their location, we classify the gold deposits into two types, (1) low-angle thrust-controlled deposits; and (2) high-angle reverse fault-related deposits. In the low-angle thrust-controlled deposits, main thrusts are listric, strike NW-SE and dip southwest. These thrusts detach into coal measures, tuffs and volcanic rocks and are bedding-parallel in the vicinity of the Dongwu unconformity. Gold ore bodies are found in the thrusts and characterized by cutting-layer veins near the surface and bedding-parallel veins at depth. The high-angle reverse fault-related deposits are located in the hinge of northeast-southwest-striking fault-related folds, with high-angle reverse faults near the hinge of folds crosscutting the Upper Permian coal measures, volcanic rocks and Dongwu unconformity, and then into the limestone of Middle Permian Maokou Formation. Ore bodies are bedding-parallel in anticline culminations where interlayer fracture zones in Upper Permian coal measures and volcanic rocks are generated by high-angle reverse faulting.We consider that the formation of the gold deposits is part of the tectonic evolution in the area. The two sets of NW-SE- and NE-SW-striking fault-related folds were successively formed during the closure of eastern Tethys Ocean in Late Triassic, and major gold deposits formed in the fault-related folds. The Dongwu unconformity and faults provided conduits for ore fluid flow, and the coal measures and the tuffs of Dachang Member acted as detachment layers and hosts for ore deposition. 相似文献
2.
Segment,Linkage,and Extensional Fault-Related Fold in Western Liaodong Bay Subbasin,Northeastern Bohai Sea,China 总被引：1，自引：0，他引：1
The western Liaodong (辽东) Bay subbasin displays examples of segment,linkage of extensional fault,and fault-related folds.The Liaoxi (辽西) extensional fault system consists of a series of NNE- and NE-trending segments that were linked through relay ramps.The fault hanging walls are characterized by a series of en echelon synclines with axial traces sub-parallel to the faults.The synclines are doubly plunging located on the hanging wall of normal faults,with the strata dip sub-parallel to the fault.These folds result from along-strike displacement variations of the individual fault segments,as well as from extensional fault-related folding.In the study area,the synclines are separated by transverse intra-basin highs and relay ramps that formed where segment linkage occurred.These hanging wall synclines and their relation to fault displacement variations indicate that they are formed by extensional fault-related fold. 相似文献
3.
Initiation and formation of folds and the Kazerun high-angle fault zone, in the Zagros fold-and-thrust belt, were related to the continuing SW–NE oriented contraction that probably initiated in the Late Cretaceous, and intensified, starting in Miocene, when the Arabian and Eurasian plates collided. The contraction that led to folding and thrusting of the Phanerozoic sequence in the belt has led to the strike–slip reactivation of basement faults that formed during the Precambrian. Two major systems of fractures have developed, under the same regional state of contraction, during the folding and strike–slip faulting processes. Folding led to the formation of a system of fold-related fractures that comprises four sets of fractures, which include an axial and a cross-axial set that trend parallel and perpendicular to the confining fold axial trace, respectively, and two oblique sets that trend at moderate angles to the axial trace. Slip along high-angle, strike–slip faults formed a system of fractures in the damage zone of the faults (e.g., Kazerun), and deformed folds that existed in the shear zone by rotating their axial plane. This fault-related fracture system is made of five sets of fractures, which include the two sets of Riedel shear fractures (R and R′), P- and Y-shear fractures, and an extensional set.
Remote sensing analysis of both fracture systems, in a GIS environment, reveals a related kinematic history for folding outside of the Kazerun shear zone and faulting and deformation (fracturing and rotation of folds) within the Kazerun fault zone. Rotation of the folds and formation of the five sets of the fault-related fractures in the Kazerun shear zone are consistent with a dextral motion along the fault. The mean trends of the shortening directions, independently calculated for the fold- and fault-related fracture systems, are remarkably close (N53 ± 4°E and N50 ± 5°E, respectively), and are perpendicular to the general NW–SE trend of the Zagros fold-and-thrust belt. Although segments of the Kazerun fault are variably oriented within a narrow range, the angular relationships between sets of fault-related fractures and these segments remain constant. 相似文献
4.
柴达木盆地北缘地区的新生代构造主要为一系列断层转折褶皱、断层传播褶皱。在邻近祁连山山前的北东背斜带中主要发育规模相对较小、隆升幅度较低的断层传播褶皱和与之相伴产出的突破断层,开始形成于古新世上新世早期;中部背斜带中发育的构造主要为断层转折褶皱和少量断层传播褶皱,开始形成于中新世上新世中期;远离山前的南西背斜带主要发育断层转折褶皱和少量滑脱褶皱,开始于上新世晚期更新世。研究区的台阶状逆断层及其相关褶皱是由祁连山山前向盆地按照一定的序次、以背驮式渐次扩展的,这个扩展过程自古新世一直持续到现在。 相似文献
5.
Most folds in stratified rock are similar in form to ideal kink, concentric or chevron folds, in which there are discontinuities in slope or curvature of bedding planes. In this respect most folds appear to be closely related to faults, traces of which can be considered to be lines across which there are discontinuities of displacement of layers. Further, the close association of reverse faults and folds or monoclinal flexures seems to indicate that theories of faulting and folding should be closely related.The theory of characteristics is a mathematical tool with which we can obtain insights into processes involving discontinuities. Theoretical characteristic lines are directions across which certain variables might be discontinuous and they are directions along which discontinuities propagate. The theory has been widely applied in plasticity theory and in fluid mechanics and theoretical studies of faulting have suggested that faults are analogous to the lines of discontinuity predicted by plasticity theory. Elasticity and viscosity theories, on which theories of folding have been founded, exclude the existence of characteristic lines in the materials unless the equilibrium equations, rheological properties or strains are nonlinear. However, all folding theories are nonlinear to some extent and the theories can be modified so that they predict lines of discontinuity for some conditions of loading and deformation.Theories of folding will be developed in subsequent papers of this series in order to predict conditions under which characteristic lines can exist in multilayered materials and in order to determine the conditions that must be satisfied across and along the characteristic lines. The theory should help us to recognize lines of apparent discontinuity in natural and experimental folds and study of these lines should provide further understanding of mechanisms of folding.Experimental studies of folding of a wide variety of materials, including alternating layers of rubber and gelatin, modeling clay and grease or graphite, and potter's clay and rubber or cardboard, suggest that the patterns of folding in these materials begin with sinusoidal forms, transform into concentric or kink forms and then into chevron forms as the multilayers are shortened axially. A suitable theory of folding of multilayers should account for these observations. 相似文献
6.
走滑断层作用的相关构造 总被引：32，自引：3，他引：29
走滑断层的形成可以用纯剪和单剪这两种基力学机制和它们之间的过渡类型－压剪和张剪加以解释,其应力分布的局域性导致了形变特性的差异性。其相关构造类型,包括褶皱断层,断层,走滑盆地,走滑旋转构造,花状构造与走滑双重构造,等是走滑断层的主要研究对象和内容。 相似文献
7.
Enrico Tavarnelli 《地学学报》1996,8(1):65-74
The Umbria-Marche-Sabina foreland fold and thrust belt (Northern Apennines, Italy) provides excellent test-cases for the hypothesis of ancient syndepositional structural features controlling thrust ramp development. The sedimentary cover, Late Triassic to Miocene in age, is made of platform and pelagic carbonates, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly during the Jurassic and the Late Cretaceous-Palaeogene, determined sensible lateral thickness variations within the relative sequences. By late Miocene the sedimentary cover was detached from its basement along a mainly evaporitic horizon, and was deformed by means of eastward-verging folds and thrusts.
In order to locate the points where thrust ramps branch-off the basal detachment, both line-length and equal-area techniques were used in the construction of a balanced cross-section through three major fault-related folds in southeastern Umbria. The nucleation of thrust ramps was controlled by the occurrence of Jurassic and Cretaceous-Palaeogene synsedimentary normal faults. These interrupted the lateral continuity of the evaporitic unit (the Late Triassic Anidriti di Burano Fm.) at the base of the sedimentary cover, and acted as obstacles to the eastward propagation of the thrust system, giving rise to major folds which originated from tip-line folding processes.
Therefore, the inferred relationships between ancient normal faults and late thrusts indicate that synsedimentary tectonic structures and the related lateral stratigraphic variations can be envisaged as mechanically important perturbations, which effectively control the nucleation and development of thrust ramps. 相似文献
In order to locate the points where thrust ramps branch-off the basal detachment, both line-length and equal-area techniques were used in the construction of a balanced cross-section through three major fault-related folds in southeastern Umbria. The nucleation of thrust ramps was controlled by the occurrence of Jurassic and Cretaceous-Palaeogene synsedimentary normal faults. These interrupted the lateral continuity of the evaporitic unit (the Late Triassic Anidriti di Burano Fm.) at the base of the sedimentary cover, and acted as obstacles to the eastward propagation of the thrust system, giving rise to major folds which originated from tip-line folding processes.
Therefore, the inferred relationships between ancient normal faults and late thrusts indicate that synsedimentary tectonic structures and the related lateral stratigraphic variations can be envisaged as mechanically important perturbations, which effectively control the nucleation and development of thrust ramps. 相似文献
8.
褶皱相关断层——以库车坳陷新生界盐上构造层为例 总被引：8，自引：3，他引：5
以盐构造解析的方法,综合地震与地质资料,表明库车坳陷新生界中的盐上断层受控于褶皱作用。盐上地层首先发生褶皱变形,随着褶皱作用的加强,然后发生断裂作用,盐上构造层的变形方式为褶皱相关断层,其变形特征不同于断层相关褶皱。从断层成因机制可见:断层相关褶皱理论不适用于库车新生代坳陷盐构造发育区。库车坳陷膏盐层的发育造成盐上构造层与盐下构造层变形有差异,盐上构造层以褶皱作用为主,盐下构造层以冲断作用为主。库车坳陷盐上构造层主要为褶皱相关断层,发育张性断块、后翼突破断层、前翼突破断层及褶皱相关断层组合等构造样式,根据盐上构造层的变形特征总结了褶皱相关断层的演化。 相似文献
9.
玉东-玛东构造带位于塔里木盆地,是在中寒武统膏盐层上滑脱的大规模褶皱冲断带,内部发育多种断层相关褶皱。目前对此构造带的研究,多关注了构造带的局部以及断裂变形。本文根据断层相关褶皱理论,利用地震资料,分析了玉东-玛东构造带内构造样式上的差异性,并通过二维构造正演模拟,建立了典型构造样式的运动学模式。认为研究区内玉东、玛东、塘北3个分区,具有不同的构造样式。玉东地区主要发育和铲式逆断层相关的断弯褶皱,玛东、塘北地区则发育断层突破的滑脱褶皱,突破断层在玛东地区为铲式断裂,而在塘北地区为坪-坡-坪式断裂。根据上奥陶统变形特征及其顶面不整合面之上的地层年代,认为玉东-玛东构造带的变形始于晚奥陶世,主要断裂及其相关褶皱形成于晚奥陶世末期。玉东地区在晚奥陶世早期,形成基底-盖层的低幅褶皱,在晚奥陶世末,形成铲式断裂及断弯褶皱;玛东和塘北地区变形发生在上奥陶统沉积之后,经历了滑脱褶皱和断层突破阶段。通过对比分析认为,断层相关褶皱样式的差异,与膏盐层岩性、厚度,上奥陶统岩性、厚度及构造转换作用有关。本研究有助于完善对塔里木盆地早古生代末期构造变形及演化的认识。 相似文献
10.
11.
伸展褶皱作用及其油气勘探意义 总被引：2，自引：0，他引：2
伸展褶皱是张性盆地区构造变形的重要组成部分,其分布相当普遍,多属于与正断层相关的褶皱。伸展褶皱的分类可以采用褶皱轴向与成因类型相结合的方案。按褶皱轴向与相关正断层或区域构造线的关系可分为纵向、横向和斜向褶皱3大类;按褶皱作用的成因机制又可分为伸展断弯褶皱、伸展断展褶皱、断层牵引褶皱、逆牵引褶皱、均衡褶皱、断层位移梯度褶皱、构造变换带褶皱、横向收缩褶皱、转换伸展褶皱等多种类型。伸展褶皱是伸展型盆地中最重要的油气圈闭构造,而且可以控制沉积相带的分布,有利于形成良好的储集岩系,促进油气运移,并与断层、岩性、地层相结合形成多种类型的复合油气藏,控制油气的富集区带。 相似文献
12.
Polyphase Tectonic Events and Cenozoic Basin-Range Coupling in the Tianshan Belt, Northwestern China 总被引：3，自引：0，他引：3
Studies show that the Tianshan orogenic belt was built in the late stage of the Paleozoic, as evidenced by the Permian red molasses and foreland basins, which are distributed in parallel with the Tianshan belt, indicating that an intense folding and uplifting event took place. During the Triassic, this orogenic belt was strongly eroded, and basins were further developed. Starting from the Jurassic, a within-plate regional extension occurred, forming a series of Jurassic-Paleogene extensional basins in the peneplaned Tianshan region. Since the Neogene, a collision event between the Indian and the Eurasian plates that took place on the southern side of the Tianshan belt has caused a strong intra-continental orogeny, which is characterized by thrusting and folding. Extremely thick coarse conglomerate and sandy conglomerate of the Xiyu Formation of Neogene System were accumulated unconformably on the Tianshan piedmont. Studies have revealed that the strong compression caused by the Indian-Eurasian collision 相似文献
13.
《Journal of Structural Geology》2001,23(2-3):329-341
Examples are presented of three temporal relationships between joints and faults: joints that pre-date faults; joints that are precursors to, or synchronous with, faults; and joints that post-date faults. Emphasis is placed on strike-slip faults in carbonate beds, but other examples are used. General rules are given for identifying the three temporal relationships between joints and faults. Joints that formed before faults can be dilated, sheared or affected by pressure solution during faulting, depending on their orientation in relation to the applied stress system. Faulted joints can preserve some original geometry of a joint pattern, with pinnate joints or veins commonly developing where faulted joints interact. Joints formed synchronously with faults reflect the same stress system that caused the faulting, and tend to increase in frequency toward faults. In contrast, joints that pre- or post-date faults tend not to increase in frequency towards the fault. Joints that post-date a fault may cut across or abut the fault and fault-related veins, without being displaced by the fault. They may also lack dilation near the fault, even if the fault has associated veins. Joints formed either syn- or post-faulting may curve into the fault, indicating stress perturbation around the fault. Different joint patterns may exist across the fault because of mechanical variations. Geometric features may therefore be used in the field to identify the temporal relationships between faults and joints, especially where early joints affect or control fault development, or where the distribution of late joints are influenced by faults. 相似文献
14.
库车断层相关褶皱的切角检验 总被引：6，自引：0，他引：6
库车再生前陆盆地地下构造复杂，正确的构造解释就成为了解盆地成因机理和油气圈闭的关键所在。利用断层相关褶皱几何学理论建立的构造几何模型，对库车地震剖面断层相关褶皱进行了切角检验，结果表明切角实测角度值与理论角度值一致，从而证明了在库车地区所建立的断层相关褶皱构造模型的合理性。 相似文献
15.
Philip Berger 《Journal of Structural Geology》1984,6(3):235-246
The Ramshorn Peak area of the Idaho-Wyoming thrust belt lies in the toe of the Prospect thrust sheet along the eastern margin of the exposed part of the thrust belt. The terrain is folded with axes trending N-S and wavelengths ranging from 3 to 4.3 km. Thrusts occur exclusively along the eastern part of the map area where the toe of the Prospect thrust sheet is thinnest. The easternmost thrusts are backthrusts.Monoclinally folded rocks are thrust on less deformed rocks south of Ramshorn Peak. This fold and fault complex is interpreted to have formed by thrusting over a large oblique and small forward step. The oblique step is responsible for the formation of the monocline in the hanging wall of the thrust. All faults and associated folds are rotated by subsequent buckle folding.Second- and third-order folds (folds at the scale of the Ramshorn Peak fold and fault complex and smaller) appear to be isolated features associated with faults (fault-related folds rather than buckle folds) because they are not distributed throughout the map area. These folds were probably initiated by translation and adhesive drag. The early folding was terminated by large translation over a stepped thrust surface which caused additional folding as the hanging wall rocks conformed to the irregular shape of the footwall. The Rich model is utilized to explain the Ramshorn Peak complex because the fold is of monoclinal form and is an isolated feature rather than part of a buckle fold wave-train. 相似文献
16.
Colby J. Vandenburg Susanne U. Janecke William C. McIntosh 《Journal of Structural Geology》1998,20(12):1747-1767
The Horse Prairie basin of southwestern Montana is a complex, east-dipping half-graben that contains three angular unconformity-bounded sequences of Tertiary sedimentary rocks overlying middle Eocene volcanic rocks. New mapping of the basin and its hanging wall indicate that five temporally and geometrically distinct phases of normal faulting and at least three generations of fault-related extensional folding affected the area during the late Mesozoic (?) to Cenozoic. All of these phases of extension are evident over regional or cordilleran-scale domains. The extension direction has rotated 90° four times in the Horse Prairie area resulting in a complex three-dimensional strain field with 60% east–west and >25% north–south bulk extension. Extensional folds with axes at high angles to the associated normal fault record most of the three-dimensional strain during individual phases of extension (phases 3a, 3b, and 4). Cross-cutting relationships between normal faults and Tertiary volcanic and sedimentary rocks constrain the ages of each distinct phase of deformation and show that extension continued episodically for more than 50 My. Gravitational collapse of the Sevier fold and thrust belt was the ultimate cause of most of the extension. 相似文献
17.
The purpose of this paper is to examine the kinematic behaviour of normal fault systems and see what general conditions govern their geometrical evolution. We pay particular attention to seismological and surface data from regions of present day active normal faulting, as the instantaneous three-dimensional geometry at the time of fault movement is better known in active regions than in areas where the faults are now static.Most normal faults are concave upward, or listric. This shape can be produced by geometric constraints, either because the faults reactivate curved thrusts, or because they must be curved to accommodate rotations. Another effect which will produce curved faults is the variation of rheology with depth: brittle failure at shallow depths produces less fault rotation than does distributed creep in the lower part of the crust. An important geometric feature of normal faulting is the uplift of the footwall. The amount of such uplift is related not only to the elastic properties of the lithosphere, but also to the throw and dip of the fault. A striking feature of active normal faults is that they occur in groups in which all the faults dip in the same direction. This behaviour arises because the faults cannot intersect: if they do, one must cease to be active. The rotation which such fault systems produce reduces the dip of the faults until a new steeply dipping fault is formed. Once a new fault cuts pre-existing faults the earlier faults become locked, and a new set of faults must propagate rapidly across the whole region involved. Many of these geometric constraints also apply to thrust faulting. 相似文献
18.
19.
Small regional folds, such as the Clover Hollow anticline of the Narrows thrust-sheet in southwest Virginia, U.S.A., are considered to be large buckle folds expressing lateral shortening above a subsurface décollement. Cleavage, mesoscopic and regional folds, and contraction faults have developed in these rocks under anchimetamorphic conditions, in a single, protracted deformation during thrust-sheet emplacement. The contraction faults dominate the structure at all scales. Three fault associations (isolated contraction faults, contraction faults in series and complex fault zones with intense folding) determine the pattern and intensity of local structures. Regional displacement transfer of strain along and across faults has produced local variations in structural style. Duplex-like systems of second-order faults terminate laterally into zones of intense folding and third-order faulting. Fold tightness, cleavage intensity, strain magnitude and total longitudinal strain (εT) are maximum in these regions. Contraction faults in this thrust-sheet have propagated along zones of high strain rate associated with mesoscopic folding and intense cleavage. Regional hinge migration, and greater structural complexity along the southeast limb of the Clover Hollow anticline, are considered to be due to emplacement of the adjacent thrust-sheet. 相似文献
20.
Mohammad A. Sarhan Richard E. Ll. Collier Ahmed Basal Mohamed Hamed Abdel Aal 《Arabian Journal of Geosciences》2014,7(11):4563-4571
The north Egyptian continental margin has undergone passive margin subsidence since the opening of Tethys, but its post-Mesozoic history has been interrupted by tectonic events that include a phase of extensional faulting in the Late Miocene. This study characterizes the geometry and distribution of Late Miocene normal faulting beneath the northern Nile Delta and addresses the relationship of this faulting to the north–northwestwards propagation of Red Sea–Gulf of Suez rifting at this time. Structural interpretation of a 2D grid of seismic reflection data has defined a Tortonian–Messinian syn-rift megasequence, when tied to well data. Normal fault correlations between seismic lines are constrained by the mapping of fault-related folds. Faults are evenly distributed across the study area and are found to strike predominantly NW–SE to NNW–SSE, with some N–S faults in the north. Faults are interpreted to be <10 km in length, typically in the range 3–6 km. This suggests that rifting in the northern Nile Delta did not proceed beyond a continental rift initiation phase, with distributed, relatively small-scale faults. This contrasts with the Gulf of Suez Rift, where faulting continued to a more evolved fault localization phase, with block-bounding faults >25 km in length. Results suggest that future studies could quantify fault evolution from rift initiation to fault linkage to displacement localization, by studying the spatial variation in faulting from the northern Nile Delta, south–southeastwards to the Gulf of Suez Rift. 相似文献