共查询到20条相似文献，搜索用时 484 毫秒
1.
Abstract The breakdown and separation or reattachment of boundary layers adjoining a mainstream are studied in the three related situations (i)-(iii) of the title. For (i) the classical steady boundary layer generally admits a logarithmic singularity in the displacement when breakdown occurs on a downstream-moving surface whereas the corresponding singularity for an upstream-moving surface can be logarithmic or of minus-one-sixth form. Conversely, the breakdown can be delayed to the onset of zero mainstream flow, in which case the displacement singularity is again logarithmic. In certain flows these singularities prove to be removable locally, yielding a breakaway separation or reattachment and including the first known successes of a classical strategy in describing large-scale separation. Other flows, by contrast, require an interactive strategy. Again, even on a fixed surface a breakdown different from Goldstein's can be produced if there is a moving section of surface further upstream. The application to (ii), semi-similar unsteady boundary layers, e.g. near an impulsively started wedge-like trailing edge, then follows readily and predicts analogous forms of singularity. The corresponding singularity in displacement predicted for fully unsteady classical boundary layers, (iii), occurs within a finite time and, like (i) (usually) and (ii), a three-tiered breakdown is involved at first. Subsequently interaction comes into play. Comparisons with numerical and/or earlier work are noted. In all three situations (i)-(iii), although the dynamics involved near breakdown, separation or reattachment are predominantly inviscid, the presence of small viscosity is of significance in enforcing smoothness of the local velocity profiles. 相似文献
2.
W. Goudswaard 《Geophysical Prospecting》2001,49(6):625-627
3.
The aim of this paper is to point out the advantages of multipoles for the exploration of the very near subsurface (0–3 m) by continuous profiling. We propose a new geometry with eight poles for a MUltipole Continuous Electrical Profiling (MUCEP) measuring system, where the array has a V-shape and is thus called ‘Vol-de-canards’. A series of criteria including 3D numerical simulations are performed (direct and inverse modelling) to determine the optimal geometry and to compare its performance (in terms of depth of investigation and resolution of the geometry of the targets) with the other arrays (quadrupoles or rectangular-type multipoles). This multipole was built together with a real-time acquisition system. The multidepth maps obtained confirm the characteristics predicted by numerical simulations. 相似文献
4.
Hiroto Ichishima Lawrence G. Barnes R. Ewan Fordyce Masaichi Kimura David J. Bohaska 《Island Arc》1994,3(4):486-492
Abstract Fossil dolphins belonging to the extinct family Kentriodontidae are small to medium-sized toothed cetaceans, which probably include the ancestors of some living species. Kentriodontids are known from rocks of Late Oligocene to Late Miocene age in various parts of the world. Among kentriodontids, species in the subfamily Kentriodontinae (e.g. species of Kentriodon Kellogg, 1927) are the most ubiquitous and generalized; these are now known from latest Oligocene to earliest Miocene strata in New Zealand and Patagonia, and Middle Miocene deposits in Maryland, Virginia, California and Japan. The diversity, morphologies and distributions of Miocene species of Kentriodontinae seem to parallel those of the living species of mostly pelagic delphinids in the subfamily Delphininae, and the fossil group may have been an ecological or behavioral/functional counterpart of the latter. Kentriodontines are inferred to have been wide-ranging neritic to pelagic animals that ate small fish and other nectonic organisms; they were probably active echolocators, and might have formed large schools. They are relatively common as fossils and, therefore, are potentially useful for intercontinental correlations of marine deposits. 相似文献
5.
6.
Paul C. Jennings 《地震工程与结构动力学》2009,38(3):269-284
7.
A destructive earthquake of magnitude Mw = 6.8 hit the region of Boumerdes and Algiers (Algeria) on May 21, 2003. This is among the strongest seismic events of the mediterranean region and the most important event in the capital Algiers since 1716. It caused a widespread damage in the epicentral region, claimed 2271 human lives, injured 10000, about 20000 housing units affected and left about 160000 homeless. The main shock was felt about 250 km far from the epicenter and triggered sea waves of 1–3 m in amplitude in Balearic islands (Spain). Based on field observations and press report an intensity IX (MSK scale) is attributed to the epicentral area. The main shock was followed by many aftershocks among them several are of magnitude greater than 5.0, which added panic to inhabitants. The main shock triggered ground deformation, particularly liquefaction whose features are in different forms and sizes and caused damage and collapse of roads. The focal mechanism determined by worldwide institutions yield a pure reverse faulting with a compressional axis striking NE-SW. The epicenter is located offshore about 7 km from the Boumerdes-Dellys coast. Field observations show 0.7 m of coseismic uplift of shoreline between Boudouaou and Dellys. This uplift is about a half of the extracted coseismic slip from the seismic moment. On the other hand there is no clear surface break onshore, confirming hence, that the causative active fault is offshore. However, the rupture may propagate onshore to the SE near the Boudouaou region where ground cracks showing reverse faulting are observed a long a corridor of about 1 km wide. These fissures may correspond to a diffuse coseismic deformation. 相似文献
8.
9.
10.
11.
《Astronomy& Geophysics》2009,50(3):3.38-3.38
Associate of the RAS, mapper of the large-scale structure of the local universe, and popular astronomy author and advocate, well-known as Director of Cape Town Planetarium. 相似文献
12.
13.
14.
This paper presents an experimental research aimed at developing a new rubber‐based seismic isolator called ‘Ball Rubber Bearing (BRB)’. The BRB is composed of a conventional steel‐reinforced multi‐layered rubber bearing with its central hole filled with small diameter steel balls that are used to provide energy dissipation capacity through friction. A large set of BRBs with different geometrical and material properties are manufactured and tested under reversed cyclic horizontal loading at different vertical compressive load levels. Extensive test results indicate that steel balls do not only increase the energy dissipation capacity of the elastomeric bearing (EB), but also increase its horizontal and vertical stiffness. It is also observed that the energy dissipation capacity of a BRB does not degrade as the number of loading cycles increases. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
Sometime during AD 1452, according to new evidence, a large-magnitude, initially phreatomagmatic eruption, destroyed the island of Kuwae (16.83°S, 168.54°E), located in the present-day Republic of Vanuatu. It created a 12×6-km submarine caldera composed of two adjacent basins. Based on estimates of caldera volume, between 30 and 60 km3 DRE of dacite magma was ejected as pyroclastic flow and fall deposits during this event. Annual layers of ice dating from the period AD 1450–1460 contain acidity peaks representing fallout of sulfuric acid onto both the Greenland and Antarctic ice caps. These acidity peaks have been attributed by others to the sedimentation of H2SO4 aerosols that originated from sulfur degassing during the Kuwae eruption. Improved dating techniques and new data from nineteen ice cores reveal a single acidity peak attributed to Kuwae lasting from 1453 to 1457. In this study, we present new electron microprobe analyses of the S, Cl, and F contents of matrix glasses and glass inclusions in phenocrysts from tephra ejected during the Kuwae eruption. We establish that the Kuwae event did indeed yield a large release of sulfur gases. From our glass inclusion data and analysis, we calculate that the total atmospheric aerosol loading from the 1452 Kuwae eruption was ≫100 Tg H2SO4. Much of the volatile mass released during the eruption was probably contained in a separate, volatile-rich, fluid phase within the pre-eruptive Kuwae magma body. Comparing the volatile release of the Kuwae eruption with other large-magnitude eruptions, places Kuwae as the greatest sulfuric acid aerosol producer in the last seven centuries, larger even than sulfur emissions from the eruption of Tambora (Indonesia) in 1815, and possibly Laki (Iceland) in 1783. The severe and unusual climatic effects reported in the mid- to late-1450s were likely caused by the Kuwae eruption. 相似文献
16.
Up-scaling of SEBAL derived evapotranspiration maps from Landsat (30 m) to MODIS (250 m) scale 总被引：2，自引：0，他引：2
Remotely sensed imagery of the Earth’s surface via satellite sensors provides information to estimate the spatial distribution of evapotranspiration (ET). The spatial resolution of ET predictions depends on the sensor type and varies from the 30–60 m Landsat scale to the 250–1000 m MODIS scale. Therefore, for an accurate characterization of the regional distribution of ET, scaling transfer between images of different resolutions is important. Scaling transfer includes both up-scaling (aggregation) and down-scaling (disaggregation). In this paper, we address the up-scaling problem.The Surface Energy Balance Algorithm for Land (SEBAL) was used to derive ET maps from Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and Moderate Resolution Imaging Spectroradiometer (MODIS) images. Landsat 7 bands have spatial resolutions of 30–60 m, while MODIS bands have resolutions of 250, 500 and 1000 m. Evaluations were conducted for both “output” and “input” up-scaling procedures, with aggregation accomplished by both simple averaging and nearest neighboring resampling techniques. Output up-scaling consisted of first applying SEBAL and then aggregating the output variable (daily ET). Input up-scaling consisted of aggregating 30 m Landsat pixels of the input variable (radiance) to obtain pixels at 60, 120, 250, 500 and 1000 m before SEBAL was applied. The objectives of this study were first to test the consistency of SEBAL algorithm for Landsat and MODIS satellite images and second to investigate the effect of the four different up-scaling processes on the spatial distribution of ET.We conclude that good agreement exists between SEBAL estimated ET maps directly derived from Landsat 7 and MODIS images. Among the four up-scaling methods the output simple averaging method produced aggregated data and aggregated differences with the most statistically and spatially predictable behavior. The input nearest neighbor method was the least predictable but was still acceptable. Overall, the daily ET maps over the Middle Rio Grande Basin aggregated from Landsat images were in good agreement with ET maps directly derived from MODIS images. 相似文献
17.
18.
Plastic ‘scrubbers’ in hand cleansers: a further (and minor) source for marine pollution identified 总被引：1，自引：0，他引：1
Murray R. Gregory 《Marine pollution bulletin》1996,32(12):867-871
Small, inconspicuous fragments of plastic, generally < 0.5 mm across (i.e. microlitter) derived from some hand cleaners and cosmetic preparations, and also used with some airblast cleaning media, are an unusual addition to post-consumer waste entering marine waters. The environmental significance of this material is unknown, but here is a further example of the intrusion of anthropogenic waste of dubious value into marine ecosystems. It could impact sea-surface microlayer ecosystems and the meiofauna of intertidal sediments. It is also speculated that these finely granulated plastics, once dispersed through the oceanic water column, could prejudice the results of some ambitious particulate carbon flux experiments as well as interfere with elemental and mineralogic composition analyses of suspended particles. They may also warrant attention when determining heavy metal concentrations in contaminated fine-grained sediments of estuarine and harbour environments. 相似文献
19.
20.