首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 414 毫秒
1.
The POLONAISE'97 (POlish Lithospheric ONset—An International Seismic Experiment, 1997) seismic experiment in Poland targeted the deep structure of the Trans-European Suture Zone (TESZ) and the complex series of upper crustal features around the Polish Basin. One of the seismic profiles was the 300-km-long profile P2 in northwestern Poland across the TESZ. Results of 2D modelling show that the crustal thickness varies considerably along the profile: 29 km below the Palaeozoic Platform; 35–47 km at the crustal keel at the Teisseyre–Tornquist Zone (TTZ), slightly displaced to the northeast of the geologic inversion zone; and 42 km below the Precambrian Craton. In the Polish Basin and further to the south, the depth down to the consolidated basement is 6–14 km, as characterised by a velocity of 5.8–5.9 km/s. The low basement velocities, less than 6.0 km/s, extend to a depth of 16–22 km. In the middle crust, with a thickness of ca. 4–14 km, the velocity changes from 6.2 km/s in the southwestern to 6.8 km/s in the northeastern parts of the profile. The lower crust also differs between the southwestern and northeastern parts of the profile: from 8 km thickness, with a velocity of 6.8–7.0 km/s at a depth of 22 km, to ca.12 km thickness with a velocity of 7.0–7.2 km/s at a depth of 30 km. In the lowermost crust, a body with a velocity of 7.20–7.25 km/s was found above Moho at a depth of 33–45 km in the central part of the profile. Sub-Moho velocities are 8.2–8.3 km/s beneath the Palaeozoic Platform and TTZ, and about 8.1 km/s beneath the Precambrian Platform. Seismic reflectors in the upper mantle were interpreted at 45-km depth beneath the Palaeozoic Platform and 55-km depth beneath the TTZ.

The Polish Basin is an up to 14-km-thick asymmetric graben feature. The basement beneath the Palaeozoic Platform in the southwest is similar to other areas that were subject to Caledonian deformation (Avalonia) such that the Variscan basement has only been imaged at a shallow depth along the profile. At northeastern end of the profile, the velocity structure is comparable to the crustal structure found in other portions of the East European Craton (EEC). The crustal keel may be related to the geologic inversion processes or to magmatic underplating during the Carboniferous–Permian extension and volcanic activity.  相似文献   


2.
The large-scale POLONAISE'97 seismic experiment investigated the velocity structure of the lithosphere in the Trans-European Suture Zone (TESZ) region between the Precambrian East European Craton (EEC) and Palaeozoic Platform (PP). In the area of the Polish Basin, the P-wave velocity is very low (Vp <6.1 km/s) down to depths of 15–20 km, and the consolidated basement (Vp5.7–5.8 km/s) is 5–12 km deep. The thickness of the crust is 30 km beneath the Palaeozoic Platform, 40–45 km beneath the TESZ, and 40–50 km beneath the EEC. The compressional wave velocity of the sub-Moho mantle is >8.25 km/s in the Palaeozoic Platform and 8.1 km/s in the Precambrian Platform. Good quality record sections were obtained to the longest offsets of about 600 km from the shot points, with clear first arrivals and later phases of waves reflected/refracted in the lower lithosphere. Two-dimensional interpretation of the reversed system of travel times constrains a series of reflectors in the depth range of 50–90 km. A seismic reflector appears as a general feature at around 10 km depth below Moho in the area, independent of the actual depth to the Moho and sub-Moho seismic velocity. “Ringing reflections” are explained by relatively small-scale heterogeneities beneath the depth interval from 90 to 110 km. Qualitative interpretation of the observed wave field shows a differentiation of the reflectivity in the lower lithosphere. The seismic reflectivity of the uppermost mantle is stronger beneath the Palaeozoic Platform and TESZ than the East European Platform. The deepest interpreted seismic reflector with zone of high reflectivity may mark a change in upper mantle structure from an upper zone characterised by seismic scatterers of small vertical dimension to a lower zone with vertically larger seismic scatterers, possible caused by inclusions of partial melt.  相似文献   

3.
One of the major tectonic problems in Europe concerns the southwest margin of the East European Platform in the region of the so-called Polish-Danish trough. In general, this margin is assumed to be the Tornquist-Teisseyre (T-T) Line, running approximately from northwest to southeast in this part of Europe. Determination of deep crustal structure of the contact zone between the Precambrian Platform and the Palaeozoic Platform was the main aim of the deep seismic sounding (DSS) programme in Poland in 1965–1982.Deep seismic soundings of the Earth's crust have been made in the T-T Line zone along nine profiles with a total length of about 2600 km. The results of deep seismic soundings have shown that the crust in the marginal zone of the East European Platform has highly anomalous properties. The width of this zone ranges from 50 km in northwest Poland to about 90 km in southeast Poland. The crustal thickness of the Palaeozoic Platform in Poland is 30–35 km, and of the Precambrian Platform 42–47 km, while in the T-T tectonic zone it varies from 50 to 55 km. Above the Moho boundary, in the T-T zone, at a depth of 40–45 km, there is a seismic discontinuity with P-wave velocities of 7.5–7.7 km/s. Boundary velocities, mean velocities and stratification of the Earth's crust vary distinctly along the T-T zone. There are also observed high gravimetric and magnetic anomalies in the T-T zone. The T-T tectonic zone determined in this manner is a deep tectonic trough with rift properties.The deep fractures delineating the T-T tectonic zone are of fundamental importance for the localization of the plate edge of the Precambrian Platform of eastern Europe. In the light of DSS results, the northeastern margin of the T-T tectonic zone is a former plate boundary of the East European Platform.  相似文献   

4.
Collisional structures from the closure of the Tornquist Ocean and subsequent amalgamation of Avalonia and Baltica during the Caledonian Orogeny in the northern part of the Trans-European Suture Zone (TESZ) in the SW Baltic Sea are investigated. A grid of marine reflection seismic lines was gathered in 1996 during the DEKORP-BASIN '96 campaign, shooting with an airgun array of 52 l total volume and recording with a digital streamer of up to 2.1 km length. The detailed reflection seismic analysis is mainly based on post-stack migrated sections of this survey, but one profile has also been processed by a pre-stack depth migration algorithm. The data provides well-constrained images of upper crustal reflectivity and lower crustal/uppermost mantle reflections. In the area of the Caledonian suture, a reflection pattern is observed with opposing dips in the upper crust and the uppermost mantle. Detailed analysis of dipping reflections in the upper crust provides evidence for two different sets of reflections, which are separated by the O-horizon, the main decollement of the Caledonian deformation complex. S-dipping reflections beneath the sub-Permian discontinuity and above the O-horizon are interpreted as Caledonian thrust structures. Beneath the O-horizon, SW-dipping reflections in the upper crust are interpreted as ductile shear zones and crustal deformation features that evolved during the Sveconorwegian Orogeny. The Caledonian deformation complex is subdivided into (1) S-dipping foreland thrusts in the north, (2) the S-dipping suture itself that shows increased reflectivity, and (3) apparently NE-dipping downfaulted sedimentary horizons south of the Avalonia–Baltica suture, which may have been reactivated during Mesozoic normal faulting. The reflection Moho at 28–35 km depth appears to truncate a N-dipping mantle structure, which may represent remnant structures from Tornquist Ocean closure or late-collisional compressional shear planes in the upper mantle. A contour map of these mantle reflections indicates a consistent northward dip, which is steepest where there is strong bending of the Caledonian deformation front. The thin-skinned character of the Caledonian deformation complex and the fact that N-dipping mantle reflections do not truncate the Moho indicate that the Baltica crust was not mechanically involved in the Caledonian collision and, therefore, escaped deformation in this area.  相似文献   

5.
Christoffer Nielsen  H. Thybo   《Tectonophysics》2009,470(3-4):298-318
The Cenozoic Baikal Rift Zone (BRZ) is situated in south-central Siberia in the suture between the Precambrian Siberian Platform and the Amurian plate. This more than 2000-km long rift zone is composed of several individual basement depressions and half-grabens with the deep Lake Baikal at its centre. The BEST (Baikal Explosion Seismic Transect) project acquired a 360-km long, deep seismic, refraction/wide-angle reflection profile in 2002 across southern Lake Baikal. The data from this project is used for identification of large-scale crustal structures and modelling of the seismic velocities of the crust and uppermost mantle. Previous interpretation and velocity modelling of P-wave arrivals in the BEST data has revealed a multi layered crust with smooth variation in Moho depth between the Siberian Platform (41 km) and the Sayan-Baikal fold belt (46 km). The lower crust exhibits normal seismic velocities around the rift structure, except for beneath the rift axis where a distinct 50–80-km wide high-velocity anomaly (7.4–7.6 ± 0.2 km/s) is observed. Reverberant or “ringing” reflections with strong amplitude and low frequency originate from this zone, whereas the lower crust is non-reflective outside the rift zone. Synthetic full-waveform reflectivity modelling of the high-velocity anomaly suggests the presence of a layered sequence with a typical layer thickness of 300–500 m coinciding with the velocity anomaly. The P-wave velocity of the individual layers is modelled to range between 7.4 km/s and 7.9 km/s. We interpret this feature as resulting from mafic to ultra-mafic intrusions in the form of sills. Petrological interpretation of the velocity values suggests that the intrusions are sorted by fractional crystallization into plagioclase-rich low-velocity layers and pyroxene- and olivine-rich high-velocity layers. The mafic intrusions were probably intruded into the ductile lower crust during the main rift phase in the Late Pliocene. As such, the intrusive material has thickened the lower crust during rifting, which may explain the lack of Moho uplift across southern BRZ.  相似文献   

6.
In the area of the Central Europe three large continental scale tectonic units meet together, namely Precambrian East European Craton (EEC) to the northeast, Variscan West European Platform (WEP) terranes to the southwest, and younger Alpine Carpathian arc in the south. The reference structure of the Central Europe is a sharp edge of the East European Craton. In the area of Poland the south-western margin of the EEC is marked as Teisseyre–Tornquist Zone (TTZ), which continues to the north as Sorgenfrei–Tornquist Zone (STZ). Teisseyre–Tornquist Zone (TTZ) — earlier Teisseyre Line, Tornquist Line or Teisseyre–Tornquist Line (TTL), is a term created in commemoration of Polish geologist Wawrzyniec Teisseyre and German geologist and paleontologist Alexander Tornquist. At the turn of XIX and XX century, they noticed a fundamental difference in the geology of platform cover between the rigid East European Platform and its more mobile southwestern forefield (Teisseyre, 1893, 1903; Tornquist, 1908, 1910). From the very beginning the TTL was conceived as a linear feature (fault or fault zone) marking the southwestern boundary of the EEC. Contrarily, the Trans–European Suture Zone (TESZ) is a term coined by Asger Berthelsen for an assemblage of suspect terranes boarded by the East European Craton and the Variscan orogeny. It is not a linear structure, but a terrane accretion zone, 100–200 km wide. Both terms, TTL and TESZ, should not be mistaken, as is the case on many maps concerning the problem (Dadlez et al., 2005). The edge of the craton is a major lithospheric structure, which appears to be a deep-seated boundary reaching at least down to a depth of about 200 km as shown by tomographic analysis of shear wave velocity structure of the mantle under Europe. Another indication of the deep-seated nature of this zone was obtained from observations of earthquakes and explosions located in Europe. To explain the observed blockage of energy from regional seismic events by TTZ, the structural anomaly between eastern and western Europe must reach at least down to a depth of about 200 km. Continental scale tectonic units of the Central Europe are clearly visible in the crustal structure, Moho depth map, and also gravity, magnetic and heat flow maps.  相似文献   

7.
New deep seismic reflection data provide images of the crust and uppermost mantle underlying the eastern Middle Urals and adjacent West Siberian Basin. Distinct truncations of reflections delineate the late-orogenic strike-slip Sisert Fault extending vertically to ∼28 km depth, and two gently E-dipping reflection zones, traceable to 15–18 km depth, probably represent normal faults associated with the opening of the West Siberian Basin. A possible remnant Palaeozoic subduction zone in the lower crust under the West Siberian Basin is visible as a gently SW-dipping zone of pronounced reflectivity truncated by the Moho. Continuity of shallow to intermediate-depth reflections suggest that Palaeozoic accreted island-arc terranes and overlying molasse sequences exposed in the hinterland of the Urals form the basement for Triassic and younger deposits in the West Siberian Basin. A highly reflective lower crust overlies a transparent mantle at about 43 km depth along the entire 100 km long seismic reflection section, suggesting that the lower crust and Moho below the eastern Middle Urals and West Siberian Basin have the same origin.  相似文献   

8.
Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.  相似文献   

9.
The CELEBRATION 2000 together with the earlier POLONAISE'97 deep seismic sounding experiments was aimed at the recognition of crustal structure in the border zone between the Precambrian East European Craton (Baltica) and Palaeozoic Europe. The CEL02 profile of the CELEBRATION family is a 400-km long SW–NE transect, running in Poland from the Upper Silesia Block (USB), across the Małopolska Block (MB) and the Trans-European Suture Zone (TESZ) to the East European Craton (EEC). The structure along CEL02 was interpreted using both 2D tomography and forward ray-tracing techniques as well as 2D gravity modelling.The crustal thickness along CEL02 varies from 32–35 km in the USB to 45–47 km beneath the TESZ and the EEC. The USB is a clearly distinctive crustal block with the characteristic high velocity lower crust (7.1–7.2 km/s), interpreted as a fragment of Gondwana. The Kraków–Lubliniec Fault is a terrane boundary produced by soft docking of the USB with the MB. The Małopolska crust fundamentally differs from the USB and has a strong connection with Baltica. It is a transitional, 150- to 200-km wide unit composed of the extended Baltican lower crust and the overlying low velocity (5.15–5.9 km/s) Neoproterozoic metasediments in the up to 18-km thick upper crust. The Łysogóry Unit has its crustal structure identical with that of Małopolska, thus it is connected with Baltica and cannot be interpreted as a Gondwana-derived terrane. Higher velocity and density bodies found below the Mazovia–Lublin Graben at a depth of 12 km and at the base of the lower crust, might be a result of mantle-derived mafic intrusions accompanying the extension of Baltica. By the preliminary 2D gravity modelling, we have reconfirmed the need for considering the increased TESZ mantle density in comparison to the EEC and USB mantle.  相似文献   

10.
The chemical and petrological composition of mafic rocks from the lower continental crust are discussed by comparing mafic granulites and meta-gabbroic rocks from the Ivrea Zone and the Northern Hessian Depression (NHD) xenolith suite. Both regions contain contrasting types of meta-mafic lithologies (i) former basaltic rocks with trace element patterns ranging from MORB-Iike to subduction-related or intra-plate tholeütes and (ü) Ca-and Al-enriched, plagiodase-dominated gabbroic rocks showing positive Eu-anomalies generated by complex deep crustal magmatic processes such as fractionation, accumulation of plagiodase and pyroxene, and crustal contamination. The absence of typical garnet-omphadte parageneses in these rocks indicates that the eclogite stability field was not reached during Palaeozoic orogenic processes. A compilation of experimentally determined P-wave velocities and densities for mafic granulites, gabbroic rocks, eclogites and peridotites is used to evaluate key physical properties of lower crustal mafic rocks during crystal thickening caused by continent-continent collision. In a step-by-step scenario it is demonstrated that the position of the seismic Moho (defined as a first-order velocity discontinuity) and the petrological Moho (defined as the boundary between non-peridotitic crustal rocks and olivine-dominated rocks) is not identical for the case that mafic rocks are transformed into edogites at the base of orogenically thickened crust. P-wave velocities of eclogites largely overlap with those of peridotites, although their densities are significantly higher than common upper mantle rocks. As a consequence, refraction seismic field studies may not detect edogites as crustal rocks. This means that the seismic Moho detected by refraction seismic field studies appears at the upper boundary between edogites and overlying crustal units. Since edogites generally have higher densities than peridotites, they might be recycled into the deeper lithosphere thereby transferring excess Eu into the upper mantle. This process could be a due for understanding the negative Euanomaly in the upper continental crust which is apparently not balanced quantitatively by the abundance of common mafic crustal rocks.  相似文献   

11.
The interpretation of newly released commercial 2D reflection seismic data in the Kattegat area, Denmark, has provided us with a better understanding of the Palaeozoic tectonic processes along the Tornquist Fault Zone. A Base Palaeozoic time structure map, a Lower Palaeozoic TWT isopach map, a “true” Lower Palaeozoic TWT isopach map, an Upper Carboniferous/Lower Permian syn-rift TWT isopach map, a Top pre-Zechstein time structure map and a Zechstein combined TWT isopach and Palaeogeography map have been generated. The uniform Lower Palaeozoic sequence thickness in the Kattegat, both inside and outside the Tornquist Zone indicates only minor lateral movements if any, whereas the extensive Upper Silurian sequence, increasing in thickness to the north, indicates a relatively fast regional subsidence. The Base Palaeozoic time structure map and the Late Palaeozoic syn-rift isopach map show a clear Late Palaeozoic extension in the area. The syn-rift isopach map, in combination with the time-equivalent opening of the Skagerrak graben at right angles to the Tornquist Zone in the Kattegat, indicates that this extensional tectonic event had a dextral slip component. Measurements on internal extensional faults in the Tornquist Zone, give a minimum right-lateral displacement of 10.4 km. The footwall blocks were deeply eroded during the Early Permian rifting, and at Zechstein times the area became a peneplane. The Tornquist Zone was later exposed to several tectonic phases, where dextral slip played a role, indicated by the “push up” and “pull down” structures caused by restraining and releasing bends of the Børglum Fault. The dextral displacement along the Børglum Fault since the beginning of the Permian is in the order of 5–7 km based on the displacement of a Lower Palaeozoic local depocentre. Early Permian depocentres and faults, which gives a total amount of right-lateral displacement since the Early Palaeozoic in the order of 15–20 km. The continuously repeated tectonic episodes along the Tornquist Zone throughout most of the Phanerozoic, show that the zone was easily reactivated, implying deep-seated basement faults. The Tornquist Zone can be seen as a “buffer zone”, between continental blocks, whenever changes in the regional stress field are induced.  相似文献   

12.
The Aegean Sea is a broad area of submerged continental crust undergoing active extension to varying degrees. A combined near-normal incidence and wide-angle seismic recording programme was conducted in the western Aegean Sea in 1993, with the principal objective of testing the popular hypothesis that lower crustal deformation (particularily extension) is expressed as a seismically “layered lower crust” (LLC). Across the southern margin of the Cretan trough (i.e. North Cretan offshore margin), a LLC was indicated by wide-angle arrivals that was not apparent on either the coincident near-normal-in-cidence profile or on older low-frequency refraction records. North of the northern margin of the Cretan Trough, beneath the Cyclades, a domain of strong reflectivity is recorded from the middle to lower crust. Here, the near-normal incidence sections also show this typical LLC reflectivity. On the wide-angle sections, a distinct interface is suggested in addition, at a larger depth than that previously assumed for the Moho discontinuity. The structural images and interpretations derived from the new seismic data so far do not clearly support either a pure-shear crustal stretching or an asymmetric simple-shear extension model for the Aegean Sea. Our results appear to be consistent with a tectonic model, where middle crust mobilised by flow coincides spatially with upper crust that has been thinned by active extension of an orogenically thickened crust and expressed near the surface as an exhumed metamorphic core complex.  相似文献   

13.
C. Bois 《地学学报》1992,4(1):99-108
Deep seismic reflection images from a set of profiles shot in Western Europe have been reviewed and compared, and tentative conclusions have been proposed concerning the evolution of the layered lower crust and the Moho. The disappearance of Variscan mountain roots is related to the set-up of a new Moho at a typical 30-km depth and the creation of seismic layering in the lower crust. Deep seismic profiles suggest that these processes resulted, at least in part, from magmatic intrusion, partial crustal melting and metamorphism of deep crustal rocks into eclogite. On the other hand, the layered lower crust is greatly attenuated beneath Cretaceous basins and Tertiary rifts in relation to prominent Moho upwellings. The unusual amplitude of the Moho reflection and the presence of anomalously high seismic velocities in the lowermost crust beneath the Tertiary rifts suggest that the Moho and part of the layering are comparatively young features related to interactions between crust and mantle. Beneath Triassic-Jurassic basins, the layered lower crust was not affected by the subsidence of the basement, with the whole crustal thinning being entirely concentrated in the upper crust. This indicates that the layered lower crust and the Moho were formed or restored during or after the main rifting phase. Seismic data reveal constraints on the processes that affect the crust-mantle transition and seem to restore the Moho to its typical depth after any mechanical deformation of the lithosphere.  相似文献   

14.
The VRANCEA99 seismic refraction experiment is part of an international and multidisciplinary project to study the intermediate depth earthquakes of the Eastern Carpathians in Romania. As part of the seismic experiment, a 300-km-long refraction profile was recorded between the cities of Bacau and Bucharest, traversing the Vrancea epicentral region in NNE–SSW direction.

The results deduced using forward and inverse ray trace modelling indicate a multi-layered crust. The sedimentary succession comprises two to four seismic layers of variable thickness and with velocities ranging from 2.0 to 5.8 km/s. The seismic basement coincides with a velocity step up to 5.9 km/s. Velocities in the upper crystalline crust are 5.9–6.2 km/s. An intra-crustal discontinuity at 18–31 km divides the crust into an upper and a lower layer. Velocities within the lower crust are 6.7–7.0 km/s. Strong wide-angle PmP reflections indicate the existence of a first-order Moho at a depth of 30 km near the southern end of the line and 41 km near the centre. Constraints on upper mantle seismic velocities (7.9 km/s) are provided by Pn arrival times from two shot points only. Within the upper mantle a low velocity zone is interpreted. Travel times of a PLP reflection define the bottom of this low velocity layer at a depth of 55 km. The velocity beneath this interface must be at least 8.5 km/s.

Geologic interpretation of the seismic data suggests that the Neogene tectonic convergence of the Eastern Carpathians resulted in thin-skinned shortening of the sedimentary cover and in thick-skinned shortening in the crystalline crust. On the autochthonous cover of the Moesian platform several blocks can be recognised which are characterised by different lithological compositions. This could indicate a pre-structuring of the platform at Mesozoic and/or Palaeozoic times with a probable active involvement of the Intramoesian and the Capidava–Ovidiu faults. Especially the Intramoesian fault is clearly recognisable on the refraction line. No clear indications of the important Trotus fault in the north of the profile could be found. In the central part of the seismic line a thinned lower crust and the low velocity zone in the uppermost mantle point to the possibility of crustal delamination and partial melting in the upper mantle.  相似文献   


15.
Crustal studies within the Japanese islands have provided important constraints on the physical properties and deformation styles of the island arc crust. The upper crust in the Japanese islands has a significant heterogeneity characterized by large velocity variation (5.5–6.1 km/s) and high seismic attenuation (Qp=100–400 for 5–15 Hz). The lateral velocity change sometimes occurs at major tectonic lines. In many cases of recent refraction/wide-angle reflection profiles, a “middle crust” with a velocity of 6.2–6.5 km/s is found in a depth range of 5–15 km. Most shallow microearthquakes are concentrated in the upper/middle crust. The velocity in the lower crust is estimated to be 6.6–7.0 km/s. The lower crust often involves a highly reflective zone with less seismicity, indicating its ductile rheology. The uppermost mantle is characterized by a low Pn velocity of 7.5–7.9 km/s. Several observations on PmP phase indicate that the Moho is not a sharp boundary with a distinct velocity contrast, but forms a transition zone from the upper mantle to the lower crust. Recent seismic reflection experiments revealed ongoing crustal deformations within the Japanese islands. A clear image of crustal delamination obtained for an arc–arc collision zone in central Hokkaido provides an important key for the evolution process from island arc to more felsic continental crust. In northern Honshu, a major fault system with listric geometry, which was formed by Miocene back arc spreading, was successfully mapped down to 12–15 km.  相似文献   

16.
In this study, we report the results of an investigation of lithological interpretation of the crust in the central Fennoscandian Shield (in Finland) using seismic wide-angle velocity models and laboratory measurements on P- and S-wave velocities of different rock types. The velocities adopted from wide-angle velocity models were compared with laboratory velocities of different rock types corrected for the crustal PT conditions in the study area. The wide-angle velocity models indicate that the P-wave velocity does not only increase step-wise at boundaries of major crustal layers, but there is also gradual increase of velocity within the layers. On the other hand, the laboratory measurements of velocities indicate that no single rock type is able to provide the gradual downward increasing trends. Thus, there must be gradual vertical changes in rock composition. The downward increase of velocities indicates that the composition of the crust becomes gradually more mafic with increasing depth. We have calculated vertical velocity profiles for a range of possible crustal lithological compositions. The Finnish crustal velocity profiles require a more mafic composition than an average global continental model would suggest. For instance, on the SVEKA'81 transect, the calculated models suggest that the crustal velocity profiles can be simulated with rock type mixtures where the upper crust consists of felsic gneisses and granitic–granodioritic rocks with a minor contribution of amphibolite and diabase. In the middle crust, the amphibolite proportion increases. The lower crust consists of tonalitic gneiss, mafic garnet granulite, hornblendite, pyroxenite and minor mafic eclogite. Assuming that these rock types are present in sufficiently extensive and thick layers, they would also have sufficiently high acoustic reflection coefficients for generating the generally well-developed reflectivity in the crust in the central part of the shield. Density profiles calculated from the lithological models suggest that there is practically no density contrast at Moho in areas of the high-velocity lower crust. Comparison of reflectors from FIRE-1 and FIRE-3 transects and the velocity model from SVEKA'81 wide-angle transect indicated that the reflectors correlate with velocity layering, but the three-dimensional structures of the crust complicate such comparisons.  相似文献   

17.
The southern segment of the seismic profile EUROBRIDGE—EUROBRIDGE-97 (EB'97)—located in Belarus and Ukraine, crosses the suture zone between two main segments of the East European Craton—Fennoscandia and Sarmatia—as well as Sarmatia itself. At the initial stage of our study, a 3-D density model has been constructed for the crust of the study region, including the major part of the Osnitsa–Mikashevichi Igneous Belt (OMIB) superimposed by sediments of the Pripyat Trough (PT), and three domains in the Ukrainian Shield—the Volhyn Domain (VD) with the anorthosite–rapakivi Korosten Pluton (KP), the Podolian Domain (PD), and the Ros–Tikich Domain (RTD). The model comprises three layers—sediments with maximum thickness (6 km) in the PT and two heterogeneous layers in the crystalline crust separated at a depth of 15 km. 3-D calculations show the main features of the observed gravity field are caused by density heterogeneities in the upper crust. Allocation of density domains deeper than 15 km is influenced by Moho topography. Fitting the densities here reveals an increase (up to 2960 kg m−3) in the modelled bodies accompanied by a Moho deepening to 50 km. In contrast, a Moho uplift to a level of 35–37 km below the KP and major part of the PT is associated with domains of reduced densities. An important role for the deep Odessa–Gomel tectonic zone, dividing the crust into two regions one of basically Archean consolidation in the west (PD and RTD) and one of Proterozoic crust in the east (Kirovograd Domain)—was confirmed.2-D density modelling on the EB'97 profile shows that in the upper crust three main domains of different Precambrian evolution—the OMIB (with the superimposed PT), the VD with the KP, and the PD—can be distinguished. Deeper, in the middle and lower crust, layered structures having no connection to the surface geology are dominant features of the models. Least thickness of the crust was obtained below the KP. Greatest crustal thickness (more than 50 km) was found below the PD, characterised also by maximum deviation of velocity/density relation in the rocks from a standard one. The velocity and density models along the EB'97 profile have been interpreted together with inferred Vp/Vs ratios to estimate crustal composition in terms of SiO2 content. In the course of the modelling, the status of the PD as a centre of Archean granulitic consolidation has been confirmed. The crustal structure of the anorthosite–rapakivi KP is complex. For the first time, a complicated structure for the lower crust and lower crust–upper mantle transition zone beneath the KP has been determined. The peculiarities of the crustal structure of the KP are quite well explained in terms of formation of rapakivi–anorthosite massifs as originating from melt chambers in the upper mantle and lower crust. An important role for the South Pripyat Fault (SPF), repeatedly activated during Proterozoic–Palaeozoic times, has been ascertained. At the subplatform stage of crustal evolution the SPF was, probably, a magma channel facilitating the granitic intrusions of the KP. In the Palaeozoic the fault was reactivated during rifting in the PT.  相似文献   

18.
The Central European Basin System (CEBS) is composed of a series of subbasins, the largest of which are (1) the Norwegian–Danish Basin (2), the North German Basin extending westward into the southern North Sea and (3) the Polish Basin. A 3D structural model of the CEBS is presented, which integrates the thickness of the crust below the Permian and five layers representing the Permian–Cenozoic sediments. Structural interpretations derived from the 3D model and from backstripping are discussed with respect to published seismic data. The analysis of structural relationships across the CEBS suggests that basin evolution was controlled to a large degree by the presence of major zones of crustal weakness. The NW–SE-striking Tornquist Zone, the Ringkøbing-Fyn High (RFH) and the Elbe Fault System (EFS) provided the borders for the large Permo–Mesozoic basins, which developed along axes parallel to these fault systems. The Tornquist Zone, as the most prominent of these zones, limited the area affected by Permian–Cenozoic subsidence to the north. Movements along the Tornquist Zone, the margins of the Ringkøbing-Fyn High and the Elbe Fault System could have influenced basin initiation. Thermal destabilization of the crust between the major NW–SE-striking fault systems, however, was a second factor controlling the initiation and subsidence in the Permo–Mesozoic basins. In the Triassic, a change of the regional stress field caused the formation of large grabens (Central Graben, Horn Graben, Glückstadt Graben) perpendicular to the Tornquist Zone, the Ringkøbing-Fyn High and the Elbe Fault System. The resulting subsidence pattern can be explained by a superposition of declining thermal subsidence and regional extension. This led to a dissection of the Ringkøbing-Fyn High, resulting in offsets of the older NW–SE elements by the younger N–S elements. In the Late Cretaceous, the NW–SE elements were reactivated during compression, the direction of which was such that it did not favour inversion of N–S elements. A distinct change in subsidence controlling factors led to a shift of the main depocentre to the central North Sea in the Cenozoic. In this last phase, N–S-striking structures in the North Sea and NW–SE-striking structures in The Netherlands are reactivated as subsidence areas which are in line with the direction of present maximum compression. The Moho topography below the CEBS varies over a wide range. Below the N–S-trending Cenozoic depocentre in the North Sea, the crust is only 20 km thick compared to about 30 km below the largest part of the CEBS. The crust is up to 40 km thick below the Ringkøbing-Fyn High and up to 45 km along the Teisseyre–Tornquist Zone. Crustal thickness gradients are present across the Tornquist Zone and across the borders of the Ringkøbing-Fyn High but not across the Elbe Fault System. The N–S-striking structural elements are generally underlain by a thinner crust than the other parts of the CEBS.The main fault systems in the Permian to Cenozoic sediment fill of the CEBS are located above zones in the deeper crust across which a change in geophysical properties as P-wave velocities or gravimetric response is observed. This indicates that these structures served as templates in the crustal memory and that the prerift configuration of the continental crust is a major controlling factor for the subsequent basin evolution.  相似文献   

19.
Multidisciplinary studies of geotransects across the North European Plain and Southern North Sea, and geological reexamination of the Variscides of the North Bohemian Massif, permit a new 3-D reassessment of the relationships between the principal crustal blocks abutting Baltica along the Trans-European Suture Zone (TESZ). Accretion was in three stages: Cambrian accretion of the Bruno–Silesian, Lysogory and Malopolska terranes; end-Ordovician/early Silurian accretion of Avalonia; and early Carboniferous accretion of the Armorican Terrane Assemblage (ATA). Palaeozoic plume-influenced metabasite geochemistry in the Bohemian Massif explains the progressive rifting away of peri-Gondwanan crustal blocks before their accretion to Baltica. Geophysical data, faunal and provenance information from boreholes, and dated small inliers and cores confirm that Avalonian crust extends beyond the Anglo-Brabant Deformation Belt eastwards to northwest Poland. The location and dip of reflectors along the TESZ and beneath the North European Plain suggest that Avalonian crust overrode the Baltica passive margin, marked by a high-velocity lower crustal layer, on shallowly southwest-dipping thrust planes forming the Heligoland–Pomerania Deformation Belt. The “Variscan orocline” of southwest Poland masks two junctions between the Armorican Terrane Assemblage (ATA) and previously accreted crustal blocks. To the east is a dextrally transpressive contact with the Bruno–Silesian and Malopolska blocks, accreted in the Cambrian, while to the north is a thrust contact with easternmost Avalonia, deeply buried beneath younger sedimentary cover. In the northeast Bohemian and Rhenohercynian Massifs Devonian “early Variscide” deformation dominated by WNW and NW-directed thrusting, records closure of Ordovician–Devonian seaways between detached “islands” of the ATA and Avalonia.  相似文献   

20.
In 1991, a deep seismic reflection line, MPNI-9101, was acquired in the southern North Sea from the Mesozoic Broad Fourteens Basin, across the West Netherlands Basin onto the London-Brabant Massif (LBM). The resultant section shows a strongly reflective lower crust beneath the area of Mesozoic basin development. This lower crustal reflectivity continues to be strong beneath the LBM. The travel time to the base of the reflective zone increases from approximately 11.0 s beneath the Mesozoic basins to 12.5 s beneath the LBM, suggesting a southward thickening of the crust (Rijkers et al., 1993). Based on these travel times and information from deep wells and refraction surveys. Moho depth is estimated to increase from about 31 km beneath the Mesozoic basins to about 38 km beneath the LBM. This difference in depth to the Moho can partly be explained by coaxial stretching of the crust beneath the Mesozoic basins. In comparison with the Mesozoic basins, the crust beneath the LBM was thickened during the Caledonian and Variscan orogenies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号