共查询到20条相似文献，搜索用时 31 毫秒
1.
LI Dahu LIAO Hu DING Zhifeng ZHAN Yan WU Pingping XU Xiaoming ZHENG Chen 《《地质学报》英文版》2018,92(1):16-33
The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai–Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background of strong earthquakes in mainland China and to predict future strong earthquake risk zones. Studies of the structural environment and physical characteristics of the deep structure in this area are helpful to explore deep dynamic effects and deformation field characteristics, to strengthen our understanding of the roles of anisotropy and tectonic deformation and to study the deep tectonic background of the seismic origin of the block's interior. In this paper, the three-dimensional(3D) P-wave velocity structure of the crust and upper mantle under the southeastern margin of the Qinghai–Tibet Plateau is obtained via observational data from 224 permanent seismic stations in the regional digital seismic network of Yunnan and Sichuan Provinces and from 356 mobile China seismic arrays in the southern section of the north–south seismic belt using a joint inversion method of the regional earthquake and teleseismic data. The results indicate that the spatial distribution of the P-wave velocity anomalies in the shallow upper crust is closely related to the surface geological structure, terrain and lithology. Baoxing and Kangding, with their basic volcanic rocks and volcanic clastic rocks, present obvious high-velocity anomalies. The Chengdu Basin shows low-velocity anomalies associated with the Quaternary sediments. The Xichang Mesozoic Basin and the Butuo Basin are characterised by lowvelocity anomalies related to very thick sedimentary layers. The upper and middle crust beneath the Chuan–Dian and Songpan–Ganzi Blocks has apparent lateral heterogeneities, including low-velocity zones of different sizes. There is a large range of low-velocity layers in the Songpan–Ganzi Block and the sub–block northwest of Sichuan Province, showing that the middle and lower crust is relatively weak. The Sichuan Basin, which is located in the western margin of the Yangtze platform, shows high-velocity characteristics. The results also reveal that there are continuous low-velocity layer distributions in the middle and lower crust of the Daliangshan Block and that the distribution direction of the low-velocity anomaly is nearly SN, which is consistent with the trend of the Daliangshan fault. The existence of the low-velocity layer in the crust also provides a deep source for the deep dynamic deformation and seismic activity of the Daliangshan Block and its boundary faults. The results of the 3D P-wave velocity structure show that an anomalous distribution of high-density, strong-magnetic and high-wave velocity exists inside the crust in the Panxi region. This is likely related to late Paleozoic mantle plume activity that led to a large number of mafic and ultra-mafic intrusions into the crust. In the crustal doming process, the massive intrusion of mantle-derived material enhanced the mechanical strength of the crustal medium. The P-wave velocity structure also revealed that the upper mantle contains a low-velocity layer at a depth of 80–120 km in the Panxi region. The existence of deep faults in the Panxi region, which provide conditions for transporting mantle thermal material into the crust, is the deep tectonic background forthe area's strong earthquake activity. 相似文献
2.
In all rocks investigated (peridotite, amphibolite, serpentinite, marble) the observed seismic anisotropy is primarily a consequence of preferred orientation of minerals and of the elastic anisotropy of the constituent minerals of the rocks. Generally the compressional-wave velocity decreases with temperature. The amount of velocity decrease, however, is different in the various rock types and even for different directions in the same anisotropic media. Fabric-induced seismic anisotropy is not drastically reduced with temperature. In the amphibolite, and especially in the serpentinite seismic anisotropy even increases with temperature. It is expected that the preferred orientation of minerals may have an effect on wave propagation even at great depths in the earth's crust and in the upper mantle. 相似文献
3.
A rheological model of the Indian shield has been constructed using the thermal structure derived from available surface heat
flow and heat generation data and the flow properties of characteristic minerals and rocks like quartz, diabase and olivine
which respectively represent the upper crust, lower crust and upper mantle. Lateral variations in the thicknesses of the brittle
and ductile crust and of the brittle upper mantle have thus been obtained for different tectonic environments. Implications
of these results to interpretation of the seismic structure of the Indian shield have been pointed out. 相似文献
4.
Five domains (microplates) have been recognized by seismic anisotropy in the mantle lithosphere of the Bohemian Massif. The mantle domains correspond to major crustal units and each of the domains bears a consistent fossil olivine fabric formed before their Variscan assembly. The present-day mantle fabric indicates that this process consisted of at least three oceanic subductions, each followed by an underthrusting of the continental lithosphere. The seismic anisotropy does not detect remnants of the oceanic subductions, but it can trace boundaries of the preserved continental domains subsequently underthrust along the paths of previous oceanic subductions. The most robust continent–continent collision was followed by westward underthrusting of the Brunovistulian mantle lithosphere, still detectable by seismic anisotropy more than 100 km beneath the Moldanubian mantle lithosphere. Major occurrences of the high-pressure/ultra high-pressure (HP–UHP) rocks follow the ENE and NNE oriented sutures and boundaries of the mantle–lithosphere domains mapped from three-dimensional modeling of body-wave anisotropy. The HP–UHP rocks are products of oceanic subductions and the following underthrusting of the continental crust and mantle lithosphere exhumed along the mantle boundaries. The close relation of the mantle sutures and occurrences of the HP–UHP rocks near the paleosubductions testifies for models interpreting the granulite–garnet peridotite association by oceanic/continental subduction/underthrusting followed by the exhumation of deep-seated rocks. Our findings support the bivergent subduction model of tectonic development of the central part of the Bohemian Massif. The inferences from seismic anisotropy image the Bohemian Massif as a mosaic of microplates with a rigid mantle lithosphere preserving a fossil olivine fabric. The collisional mantle boundaries, blurred by tectonometamorphic processes in easily deformed overlying crust, served as major exhumation channels of the HP–UHP rocks. 相似文献
5.
We study high-resolution three-dimensional P-wave velocity (Vp) tomography and anisotropic structure of the crust and uppermost mantle under the Helan–Liupan–Ordos western margin tectonic belt in North-Central China using 13,506 high-quality P-wave arrival times from 2666 local earthquakes recorded by 87 seismic stations during 1980–2008. Our results show that prominent low-velocity (low-V) anomalies exist widely in the lower crust beneath the study region and the low-V zones extend to the uppermost mantle in some local areas, suggesting that the lower crust contains higher-temperature materials and fluids. The major fault zones, especially the large boundary faults of major tectonic units, are located at the edge portion of the low-V anomalies or transition zones between the low-V and high-V anomalies in the upper crust, whereas low-V anomalies are revealed in the lower crust under most of the faults. Most of large historical earthquakes are located in the boundary zones where P-wave velocity changes drastically in a short distance. Beneath the source zones of most of the large historical earthquakes, prominent low-V anomalies are visible in the lower crust. Significant P-wave azimuthal anisotropy is revealed in the study region, and the pattern of anisotropy in the upper crust is consistent with the surface geologic features. In the lower crust and uppermost mantle, the predominant fast velocity direction (FVD) is NNE–SSW under the Yinchuan Graben and NWW–SEE or NW–SE beneath the Corridor transitional zone, Qilian Orogenic Belt and Western Qinling Orogenic Belt, and the FVD is NE–SW under the eastern Qilian Orogenic Belt. The anisotropy in the lower crust may be caused by the lattice-preferred orientation of minerals, which may reflect the lower-crustal ductile flow with varied directions. The present results shed new light on the seismotectonics and geodynamic processes of the Qinghai–Tibetan Plateau and its northeastern margin. 相似文献
6.
There is an ongoing debate about the tectonic evolution of southeast Australia, particularly about the causes and nature of its accretion to a much older Precambrian core to the west. Seismic imaging of the crust can provide useful clues to address this issue. Seismic tomography imaging is a powerful tool often employed to map elastic properties of the Earth's lithosphere, but in most cases does not constrain well the depth of discontinuities such as the Mohorovi?i? (Moho). In this study, an alternative imaging technique known as receiver function (RF) has been employed for seismic stations near Canberra in the Lachlan Orogen to investigate: (i) the shear-wave-velocity profile in the crust and uppermost mantle, (ii) variations in the Moho depth beneath the Lachlan Orogen, and (iii) the nature of the transition between the crust and mantle. A number of styles of RF analyses were conducted: H-K stacking to obtain the best compressional–shear velocity (V P /V S) ratio and crustal thickness; nonlinear inversion for the shear-wave-velocity structure and inversion of the observed variations in RFs with back-azimuth to investigate potential dipping of the crustal layers and anisotropy. The thick crust (up to 48 km) and the mostly intermediate nature of the crust?mantle transition in the Lachlan Orogen could be due to the presence of underplating at the base of the crust, and possibly to the existing thick piles of Ordovician mafic rocks present in the mid and lower crust. Results from numerical modelling of RFs at three seismic stations (CAN, CNB and YNG) suggest that the observed variations with back-azimuth could be related to a complex structure beneath these stations with the likelihood of both a dipping Moho and crustal anisotropy. Our analysis reveals crustal thickening to the west beneath CAN station which could be due to slab convergence. The crustal thickening may also be related to the broad Macquarie volcanic arc, which is rooted to the Moho. The crustal anisotropy may arise from a strong N–S structural trend in the eastern Lachlan Orogen and to the preferred crystallographic orientation of seismically anisotropic minerals in the lower and middle crust related to the paleo-Pacific plate convergence. 相似文献
7.
A mafic–ultramafic intrusive belt comprising Silurian arc gabbroic rocks and Early Permian mafic–ultramafic intrusions was recently identified in the western part of the East Tianshan, NW China. This paper discusses the petrogenesis of the mafic–ultramafic rocks in this belt and intends to understand Phanerozoic crust growth through basaltic magmatism occurring in an island arc and intraplate extensional tectonic setting in the Chinese Tianshan Orogenic Belt (CTOB). The Silurian gabbroic rocks comprise troctolite, olivine gabbro, and leucogabbro enclosed by Early Permian diorites. SHRIMP II U-Pb zircon dating yields a 427 ± 7.3 Ma age for the Silurian gabbroic rocks and a 280.9 ± 3.1 Ma age for the surrounding diorite. These gabbroic rocks are direct products of mantle basaltic magmas generated by flux melting of the hydrous mantle wedge over subduction zone during Silurian subduction in the CTOB. The arc signature of the basaltic magmas receives support from incompatible trace elements in olivine gabbro and leucogabbro, which display enrichment in large ion lithophile elements and prominent depletion in Nb and Ta with higher U/Th and lower Ce/Pb and Nb/Ta ratios than MORBs and OIBs. The hydrous nature of the arc magmas are corroborated by the Silurian gabbroic rocks with a cumulate texture comprising hornblende cumulates and extremely calcic plagioclase (An up to 99 mol%). Troctolite is a hybrid rock, and its formation is related to the reaction of the hydrous basaltic magmas with a former arc olivine-diallage matrix which suggests multiple arc basaltic magmatism in the Early Paleozoic. The Early Permian mafic–ultramafic intrusions in this belt comprise ultramafic rocks and evolved hornblende gabbro resulting from differentiation of a basaltic magma underplated in an intraplate extensional tectonic setting, and this model would apply to coeval mafic–ultramafic intrusions in the CTOB. Presence of Silurian gabbroic rocks as well as pervasively distributed arc felsic plutons in the CTOB suggest active crust-mantle magmatism in the Silurian, which has contributed to crustal growth by (1) serving as heat sources that remelted former arc crust to generate arc plutons, (2) addition of a mantle component to the arc plutons by magma mixing, and (3) transport of mantle materials to form new lower or middle crust. Mafic–ultramafic intrusions and their spatiotemporal A-type granites during Early Permian to Triassic intraplate extension are intrusive counterparts of the contemporaneous bimodal volcanic rocks in the CTOB. Basaltic underplating in this temporal interval contributed to crustal growth in a vertical form, including adding mantle materials to lower or middle crust by intracrustal differentiation and remelting Early-Paleozoic formed arc crust in the CTOB. 相似文献
8.
The frequently observed parallelism between rifts and the preexisting orogenic fabric of continents suggests that the inherited tectonic fabric of the lithosphere influences the rupture of continents. We propose that the existence of a pervasive fabric in the lithospheric mantle induces an anisotropic strength in the lithosphere, that guides the propagation of continental rifts. Subcrustal mantle mechanical anisotropy is supported by (i) the anisotropic strength of olivine, (ii) an ubiquitous tectonic fabric in exposed mantle rocks, and (iii) measurements of seismic and electrical anisotropy. During major episodes of continent assembly, a pervasive deformation of the lithosphere induces a lattice-preferred orientation of olivine in mantle rocks. Later on, this crystallographic fabric is ‘frozen-in’ and represents the main source of shear wave splitting. This olivine fabric may entail a mechanical anisotropy in the lithospheric mantle. During subsequent tectonic events, especially during rifting, mechanical anisotropy may control the tectonic behaviour of the lithosphere 相似文献
9.
Else-Ragnhild Neumann 《Tectonophysics》1994,240(1-4):159-172
Extrusion temperatures for basaltic lavas in the Permo-Carboniferous Oslo Rift, estimated from whole rock major element compositions, are estimated to be 1270 to 1340°C. This means that magmatism during the Oslo rifting event was not associated with a large temperature anomaly in the underlying upper mantle. Partial melting is believed to be caused by a combination of crustal extension, a weak temperature anomaly in the underlying asthenosphere, and/or high fluid-contents in the mantle source region (“wet-spot”). Petrological and gcochemical data imply that large masses of cumulate rocks were deposited in the deep crust during the Oslo rifting event. The densities and seismic velocities (Vp) of these cumulate rocks are estimated to be 2.8–3.5 g/cm3 and 7.5–8.0 km/s. A rough estimate suggests that cumulus minerals alone account for a net transfer of at least 2 × 1017 kg of magmatic material from the mantle into the deep crust. In addition comes material representing
1. (a) cumulate minerals corresponding to eroded magmatic surface and subsurface rocks
2. (b) intercumulus material, and
3. (c) magmas crystallized to completion in the deep crust.
Estimates based exclusively on geophysical data tend to underestimate the true transfer of mass into the lower crust as gabbroic cumulate rocks, and melts crystallizing to completion in the lower crust have densities and seismic velocities similar to those of lower crustal wallrocks. 相似文献
10.
Seismic velocities under confining pressures to 10 kbar have been measured for rocks of the Ivrea—Verbano and Strona—Ceneri Zones of northern Italy, a metamorphic complex thought to represent a cross-section of the continental crust and crust—mantle boundary. Laboratory-determined compressional wave velocities for schists and gneisses of the amphibolite facies found in the upper levels of the section (having an average density of 2.74 g/cm3) average 6.45 km/sec at pressures between 6 and 10 kbar. These increase with depth to values greater than 7.1 km/sec for amphibolites and rocks of the amphibolite—granulite facies transition and to 7.5 km/sec. (average density 3.06 g/cm3) in intermediate and mafic granulite facies rocks near the base of the section. Compressional wave velocities then abruptly increase to 8.5 km/sec in ultramafic complexes near the Insubric Line. Regional geophysical surveys show that Pg is 6.0 km/sec (density of 2.7 g/cm3), P* is 7.2–7.4 km/sec (density of 3.1 g/cm3) and Pn is 8.1 km/sec, values which are in agreement with the laboratory data when effects of temperature are taken into consideration. Estimated thicknesses of exposed rock units are in reasonable agreement with thicknesses determined for crustal layers in seismic refraction experiments. The agreement between the regional crustal structure and the laboratory-determined values of velocity and density provides strong evidence for the hypothesis that the rocks of this metamorphic complex represent a cross-section of the continental crust of the Po Basin.Using the Ivrea—Verbano and Strona—Ceneri sequence as a model of the continental crust, the crust of northern Italy is shown to consist of a thick series of metamorphic rocks with greenschist facies rocks occupying the uppermost levels. These grade downward into amphibolite facies gneisses and schists with occasional granitic intrusives. The Conrad discontinuity is marked by a change from silicic and intermediate amphibolite facies gneisses to intermediate and mafic granulite facies rocks in which hydrous minerals diminish in abundance and thus represents a distinct transition in terms of both composition and metamorphic grade. The lower crust is dominated by a heterogeneous series of mafic and metapelitic rocks in the granulite facies. Importantly, metasedimentary rocks of intermediate silica content found in the complex can have compressional wave velocities equivalent to velocities in mafic rocks suggesting that the lower continental crust everywhere is not necessarily mafic in composition. Ultramafic complexes near the Insubric Line may represent the upper mantle of the continent and their setting suggests that the continental crust-upper mantle boundary is sharp and is not isochemical. 相似文献
11.
"罗田穹隆"中的下地壳俯冲成因榴辉岩及其地质意义 总被引：12，自引：0，他引：12
在“罗田穹隆”中发现了下地壳俯冲成因榴辉岩．榴辉岩呈透镜状或板状产于含石榴子石条带状片麻岩中．新鲜的榴辉岩主要由石榴子石、绿辉石、金红石等组成．含少量退变质的角闪石、斜长石、紫苏辉石、透辉石、(钛)磁铁矿和石英等．研究区榴辉岩以保留早期麻粒岩相变质矿物残留体以及经受晚期麻粒岩相和角闪岩相退变为特征．指示它们由扬子镁铁质下地壳麻粒岩相岩石俯冲到深部发生变质并形成榴辉岩．然后折返至下地壳发生麻粒岩相退变，由于麻粒岩相退变质阶段仅以后成合晶形式出现．因而它们可能在下地壳停留时间不长．就又进一步被构造抬升至中上地壳而发生角闪岩相退变．大别山造山带乃至扬子板块北缘现今缺乏厚层镁铁质下地壳．它们也很少出露地表．推测这些俯冲的镁铁质下地壳可能已拆离再循环进人地幔．从而为“罗田穹隆”的形成和演化以及大别山高压-超高压岩石的形成与折返机制等研究提供了关键性的岩石学证据。 相似文献
12.
羌塘岩带碰撞后超钾质火山岩地球化学特征及成因探讨 总被引：1，自引：0，他引：1
羌塘超钾质火山岩为板块碰撞后的产物,地球化学特征表明,其同时具有板内火山岩和俯冲带岛弧火山岩的双重地球化学特性。化学组成上富含轻稀土和大离子亲石元素而亏损Cr、Ni等相容元素。在成因上受分离结晶作用和源区混合作用共同制约。源区为受古俯冲上地壳物质和下地幔上升流体交代混合的EMII型富集地幔端元,可能富含角闪石和金云母等矿物。 相似文献
13.
The 2-D density modeling of the sublatitudinal deep seismic sounding profile in the Tsushima Basin (Sea of Japan) was performed.
The available data allow us to presume that the opening of the Tsushima Basin took place under conditions of an anomalously
heated mantle that fostered emplacement of mantle material into the basinal crust and basin/continental margin transition
zone of the Korean Peninsula attended by formation of the oceanic crust. The increased (relative to the normal oceanic crust)
thickness of the basinal crust was conditioned by the accumulation of a large amount of terrigenous material and volcanogenic
rocks in the upper part of the crust and underplating of mantle material in the crustal base. 相似文献
14.
长江中下游成矿带及邻区地壳结构——MASH成矿过程的P波接收函数成像证据？ 总被引：12，自引：0，他引：12
利用长江中下游成矿带多学科深部探测剖面于2009年11月至2011年3月间采集的天然地震数据,通过天然地震接收函数成像等分析研究,得到了研究区地壳和上地幔结构的清晰图像。接收函数成像结果显示研究区内Moho面深度存在着明显的起伏变化,在长江中下游成矿带(指剖面穿过的长江中下游成矿带宁芜矿集区,下同)下方存在着"幔隆构造"。在剖面东南端(即扬子克拉通北缘),Moho面相对稳定,深度约为30km;在茅山和江南断裂附近,Moho面存在上下起伏现象;在剖面中部或宁芜矿集区下方,Moho面存在明显隆起,深度只有28km;在郯庐断裂带下方,Moho面明显加深,深度达到36km;进一步向北到华北地台南缘,Moho面深度逐渐恢复到了32km左右的平均深度水平。其次,我们在接收函数成像结果中发现,长江中下游成矿带与其周边下地壳结构存在着明显的差异,成矿带的下地壳具有显著的地震波方位各向异性。扬子克拉通北缘的下地壳呈高速的近水平状结构,地震波各向异性特征不明显;与此相比,长江中下游成矿带的下地壳虽然也呈近水平状结构特征,但是,对于沿成矿带走向方向传播的地震波,其下地壳具有高速特征,而对于垂直于成矿带走向方向上传播的地震波,其下地壳却又表现为低速特征,这意味着成矿带的下地壳存在着平行于成矿带走向(即近北东—南西)方向的地震波各向异性,我们解释其是下地壳熔融并沿成矿带走向水平流动导致矿物晶体定向排列的结果。最后,在郯庐断裂以西的华北地台南缘观测到一条从上地壳延伸到中下地壳的南南东向倾斜的转换震相,我们推测它可能是合肥盆地内地壳伸展构造的反映。此外,我们发现接收函数成像结果中观测到的"幔隆构造"与远震P波层析成像结果在成矿带下方150km深度上显示的上地幔低速异常(江国明等,另文发表)存在着良好的对应关系,我们解释它们是软流圈物质上涌的遗迹。综合天然地震接收函数成像、远震P波层析成像和前人关于岩浆岩等方面的研究成果,我们认为长江中下游成矿带现今的下地壳可能是中生代发生成矿作用的多级岩浆房系统的一部分,成矿带的形成可能是类似MASH过程的产物。首先,软流圈物质上涌导致了长江中下游成矿带及其周边拉张环境的形成,在其上部地壳中形成了一系列伸展构造;然后,软流圈物质通过底侵进入长江中下游成矿带的原下地壳并与原下地壳物质发生同化作用,形成类埃达克质岩浆;接着,类埃达克质岩浆沿着伸展、拆离构造上升到地壳浅部形成不同层次的岩浆房和侵入岩体,并与围岩作用形成矿床。 相似文献
15.
In order to better constrain the interpretation and the nature of the seismic reflectors, experimental measurements at high confining pressure (up to 300 MPa) and room temperature of the compressional wave velocity (Vp) on 10 samples representative of the most common lithologies along the Aurina (Ahrntal), Tures (Tauferer Tal), and Badia (Abtei Tal) Valleys profile (Eastern Alps, Italy) have been performed. For each sample, the speed of ultrasonic waves was measured in three mutually perpendicular directions, parallel and normal to the rock foliation and lineation.The main results are:(a) Good agreement between the calculated vs. measured modal compositions of the considered rocks, indicating that they were presumably equilibrated at the estimated P–T conditions; therefore, the seismic properties are representative of the crustal level indicated by the thermobarometry.(b) Measured and calculated average Vp are in good agreement, and are typical of mid-crustal level (6.0–6.5 km/s). Only the amphibolites show Vp typical of the lower crust (7.2 km/s).(c) The seismic anisotropy of metapelites is very high (12–27%), both with orthorhombic and transverse isotropy symmetry; amphibolites are transversely isotropic with an anisotropy of 8%; orthogneisses and granitoids are isotropic or weakly anisotropic.(d) The contacts between amphibolites and all other rock types may generate good reflections, provided they are not steeply inclined. Although the metamorphic foliation remains steeply inclined, discordant buried sub-horizontal igneous contacts may be detected. 相似文献
16.
埃达克质岩的构造背景与岩石组合 总被引：6，自引：1，他引：5
本文介绍了埃达克质岩形成的构造背景与岩石组合。埃达克质岩可以形成于不同的构造背景并与不同类型的岩石同时出现：1）火山弧环境中常出现埃达克质岩一高镁安山岩-富Nb玄武质岩组合,它的形成可能与板片熔融以及熔体一地幔橄榄岩的相互作用有关;2）大陆活动碰撞造山带环境（如羌塘）中埃达克质岩常与同期钾质或橄榄玄粗质岩共生,这可能与俯冲陆壳熔融和俯冲陆壳熔体交代的地幔橄榄岩熔融有关;3）造山带伸展垮塌环境（如大别山）中埃达克质岩会伴随有镁铁质一超镁铁质岩浆出露,增厚下地壳产生埃达克质岩浆后的榴辉岩质残留体拆沉进入地幔,与地幔橄榄岩的混合可能形成后期镁铁质一超镁铁质岩浆的源区;4）大陆板内伸展环境中埃达克质岩常与同期橄榄玄粗质的岩石共生,增厚、拆沉下地壳,以及富集地幔的熔融或岩浆混合在岩石的成因中发挥了重要作用。 相似文献
17.
Migration of zero-offset seismic sections of deep crust can be done with methods based on ray tracing. We modify the classical ray tracing migration method (RTM), introducing a consistency check to control whether back-propagated rays satisfy the condition of strict normal incidence at the migrated reflector. A synthetic test shows the effectiveness of the method; in particular the control of normal incidence allows elimination of physically inconsistent reflectors from the migrated section. Then RTM is applied to a crustal seismic profile acquired in central Italy, using a velocity model obtained from wide-angle data that reproduces the gross structures of the Apenninic crust. The lateral variation of the seismic fabric shown from the migrated section reveals the presence of coexisting extensional and compressional tectonic regimes. Kinematic diffraction modelling gives additional information about both the distribution of seismic velocities and major active geodynamic processes in the upper lithosphere. The migrated section supports the subdivision of northern Apennines in two tectonic regions: a stretched upper plate (Tuscany and northern Thyrrenian), supported by a rise of the asthenosphere, and a downwarped lower plate (Adria), subducted below the mountain belt. 相似文献
18.
松辽盆地地幔热流的演化特征 总被引：6，自引：4，他引：6
李志安 《大地构造与成矿学》1995,19(2):104-112
本文根据松辽盆地沉积岩层中的放射性元素（Ｕ、Ｔｈ、４０Ｋ）含量以及地震波速，计算了盆地各岩层放射性生热率，然后，采用＂剥层法＂从地表开始，自上而下，由浅入深地扣除盆地在不同演化阶段各岩层提供的热量，从而得出地质年代地幔的热流值，并在此基础上，探讨了地幔热流演化与盆地构造发展的关系。 相似文献
19.
Central Italy is an active tectonic area that has been recently studied by several regional mantle, Pn and SKS, studies which revealed the presence of a strong regional anisotropy. In this paper, we present the first petrophysical results on the only mantle xenoliths from Central Italy, which place new constraints on the upper mantle structures of this region. The Torre Alfina mantle xenoliths are very small in size, from few millimetres to about 1.5 cm. They are mainly dunites and harzburgites, with subordinate lherzolites and wehrlites. Since olivine and spinel are always present, they should have crystallised in the spinel-bearing lherzolite field. Their mineralogical composition is ol+spl±opx±cpx. Both olivines and pyroxenes are present as porphyroclasts and as neoblasts. The xenoliths show different degrees of recrystallization. Geothermobarometry on these xenoliths give a temperature range of 1040±40 °C and a pressure estimate of about 1.5 GPa, corresponding to 50 to 60 km depth. Previous seismic studies have estimated the Moho to be at 20 to 25 km in this region, hence the xenoliths come from a hot mantle, probably asthenospheric, below a lithosphere of about 25 to 40 km in thickness below the Moho. We measure the crystallographic preferred orientation (CPO) of olivines and pyroxenes using a SEM and the Electron Back Scattered Diffraction (EBSD) technique. The CPO shows all three axes of olivine are tightly clustered: [100] axis is typically more tightly clustered than [010] and [001] is the most widely distributed axis. The fabric strength expressed by the integral J index, varies from 4.5 to 25.9, and decreases with the degree of recrystallization. We use CPO data to calculate anisotropic seismic properties of the xenoliths. They are very homogenous and probably statistically representative of the mantle below the Torre Alfina area. Vp ranges from 8.4 to 9.1 km/s, Vs1 from 4.8 to 5.0 km/s. The seismic anisotropy is more variable; AVp ranges from 9.8% to 19.3% and AVs from 7.3% to 13.4%. The majority of the xenoliths display an orthorhombic seismic symmetry, but xenoliths with a transverse isotropic behaviour have also been observed.
We consider four geodynamic models for the source region of the xenoliths (extension, shear, upwelling, slab tilted), defined by different orientations of the structural reference frame, and we calculated for each model the variation of the seismic properties with temperature, pressure and volume fraction of orthopyroxene. After comparing this variation of calculated seismic parameters with seismic observations from the region, we form the hypothesis that the xenoliths come from either an extensional tectonic zone (lineation X and foliation plane XY horizontal) or transcurrent shear zone (lineation X horizontal and foliation plane XY vertical) and that the mantle beneath Torre Alfina is composed by 70% olivine and 30% orthopyroxene forming an anisotropic layer of about 160 or 110 km in thickness, respectively. 相似文献
20.
F. Hauser V. Raileanu W. Fielitz A. Bala C. Prodehl G. Polonic A. Schulze 《Tectonophysics》2001,340(3-4):233-256
The VRANCEA99 seismic refraction experiment is part of an international and multidisciplinary project to study the intermediate depth earthquakes of the Eastern Carpathians in Romania. As part of the seismic experiment, a 300-km-long refraction profile was recorded between the cities of Bacau and Bucharest, traversing the Vrancea epicentral region in NNE–SSW direction.
The results deduced using forward and inverse ray trace modelling indicate a multi-layered crust. The sedimentary succession comprises two to four seismic layers of variable thickness and with velocities ranging from 2.0 to 5.8 km/s. The seismic basement coincides with a velocity step up to 5.9 km/s. Velocities in the upper crystalline crust are 5.9–6.2 km/s. An intra-crustal discontinuity at 18–31 km divides the crust into an upper and a lower layer. Velocities within the lower crust are 6.7–7.0 km/s. Strong wide-angle PmP reflections indicate the existence of a first-order Moho at a depth of 30 km near the southern end of the line and 41 km near the centre. Constraints on upper mantle seismic velocities (7.9 km/s) are provided by Pn arrival times from two shot points only. Within the upper mantle a low velocity zone is interpreted. Travel times of a PLP reflection define the bottom of this low velocity layer at a depth of 55 km. The velocity beneath this interface must be at least 8.5 km/s.
Geologic interpretation of the seismic data suggests that the Neogene tectonic convergence of the Eastern Carpathians resulted in thin-skinned shortening of the sedimentary cover and in thick-skinned shortening in the crystalline crust. On the autochthonous cover of the Moesian platform several blocks can be recognised which are characterised by different lithological compositions. This could indicate a pre-structuring of the platform at Mesozoic and/or Palaeozoic times with a probable active involvement of the Intramoesian and the Capidava–Ovidiu faults. Especially the Intramoesian fault is clearly recognisable on the refraction line. No clear indications of the important Trotus fault in the north of the profile could be found. In the central part of the seismic line a thinned lower crust and the low velocity zone in the uppermost mantle point to the possibility of crustal delamination and partial melting in the upper mantle. 相似文献