首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Due to the fact that the spectrum of a convolution is the product of the spectra of the two convolved functions, the convolution integrals of physical geodesy can be evaluated very efficiently by the use of the fast Fourier transform (FFT) provided that gravity and/or terrain data are available on a regular grid. All Fourier transform-based methods usually treat the gridded data as point values despite the fact that these discrete values may have been obtained by averaging and they represent mean values over the whole area of a grid element. In the frequency domain, this fact can be taken into account very easily, because the spectra of mean and point data are related via a two-dimensional (2D) sinc function. The paper shows explicitly this relationship using the convolution integrals for the evaluation of geoid undulations, deflections of the vertical, and gravity and gradiometry terrain effects. Numerical tests are presented, indicating that the differences in the two approaches may become significant when highly accurate results are wanted. The application of the2D sinc function in the evaluation, update, and inversion of other convolution integrals is briefly discussed as well.  相似文献   

2.
An inverse Poisson integral technique has been used to determine a gravity field on the geoid which, when continued by analytic free space methods to the topographic surface, agrees with the observed field. The computation is performed in three stages, each stage refining the previous solution using data at progressively increasing resolution (1o×1o, 5′×5′, 5/8′×5/8′) from a decreasing area of integration. Reduction corrections are computed at 5/8′×5/8′ granularity by differencing the geoidal and surface values, smoothed by low-pass filtering and sub-sampled at 5′ intervals. This paper discusses 1o×1o averages of the reduction corrections thus obtained for 172 1o×1o squares in western North America. The 1o×1o mean reduction corrections are predominantly positive, varying from −3 to +15mgal, with values in excess of 5mgal for 26 squares. Their mean andrms values are +2.4 and 3.6mgal respectively and they correlate well with the mean terrain corrections as predicted byPellinen in 1962. The mean andrms contributions from the three stages of computation are: 1o×1o stage +0.15 and 0.7mgal; 5′×5′ stage +1.0 and 1.6mgal; and 5/8′×5/8′ stage +1.3 and 1.8mgal. These results reflect a tendency for the contributions to become larger and more systematically positive as the wavelengths involved become shorter. The results are discussed in terms of two mechanisms; the first is a tendency for the absolute values of both positive and negative anomalies to become larger when continued downwards and, the second, a non-linear rectification, due to the correlation between gravity anomaly and topographic height, which results in the values continued to a level surface being systematically more positive than those on the topography.  相似文献   

3.
Model computations were performed for the study of numerical errors which are interjected into local geoid computations byFFT. The gravity field model was generated through the attractions of granitic prisms derived from actual geology. Changes in sampling interval introduced only0.3 cm variation in geoid heights. Although zero padding alone provided an improvement of more than5 cm in theFFT generated geoid, the combination of spectral windowing (tapering) and padding further reduced numerical errors. For theGPS survey of Franklin County, Ohio, the parameters selected as a result of model computations, allow large reduction in local data requirements while still retaining the centimeter accuracy when tapering and padding is applied.  相似文献   

4.
 Two numerical techniques are used in recent regional high-frequency geoid computations in Canada: discrete numerical integration and fast Fourier transform. These two techniques have been tested for their numerical accuracy using a synthetic gravity field. The synthetic field was generated by artificially extending the EGM96 spherical harmonic coefficients to degree 2160, which is commensurate with the regular 5′ geographical grid used in Canada. This field was used to generate self-consistent sets of synthetic gravity anomalies and synthetic geoid heights with different degree variance spectra, which were used as control on the numerical geoid computation techniques. Both the discrete integration and the fast Fourier transform were applied within a 6∘ spherical cap centered at each computation point. The effect of the gravity data outside the spherical cap was computed using the spheroidal Molodenskij approach. Comparisons of these geoid solutions with the synthetic geoid heights over western Canada indicate that the high-frequency geoid can be computed with an accuracy of approximately 1 cm using the modified Stokes technique, with discrete numerical integration giving a slightly, though not significantly, better result than fast Fourier transform. Received: 2 November 1999 / Accepted: 11 July 2000  相似文献   

5.
Gravity field convolutions without windowing and edge effects   总被引：5，自引：0，他引：5  
A new set of formulas has been developed for the computation of geoid undulations and terrain corrections by FFT when the input gravity anomalies and heights are mean gridded values. The effects of the analytical and the discrete spectra of kernel functions and that of zero-padding on the computation of geoid undulations and terrain corrections are studied in detail.Numerical examples show that the discrete spectrum is superior to the analytically-defined one. By using the discrete spectrum and 100% zero-padding, the RMS differences are 0.000 m for the FFT geoid undulations and 0.200 to 0.000 mGal for the FFT terrain corrections compared with results obtained by numerical integration.  相似文献   

6.
The formulas for the determination of the coefficients of the spherical harmonic expansion of the disturbing potential of the earth are defined for data given on a sphere. In order to determine the spherical harmonic coefficients, the gravity anomalies have to be analytically downward continued from the earth's surface to a sphere—at least to the ellipsoid. The goal of this paper is to continue the gravity anomalies from the earth's surface downward to the ellipsoid using recent elevation models. The basic method for the downward continuation is the gradient solution (theg 1 term). The terrain correction has also been computed because of the role it can play as a correction term when calculating harmonic coefficients from surface gravity data. Theg 1 term and the terrain correction were expanded into the spherical harmonics up to180 th order. The corrections (theg 1 term and the terrain correction) have the order of about 2% of theRMS value of degree variance of the disturbing potential per degree. The influences of theg 1 term and the terrain correction on the geoid take the order of 1 meter (RMS value of corrections of the geoid undulation) and on the deflections of the vertical is of the order 0.1″ (RMS value of correction of the deflections of the vertical).  相似文献   

7.
Any errors in digital elevation models (DEMs) will introduce errors directly in gravity anomalies and geoid models when used in interpolating Bouguer gravity anomalies. Errors are also propagated into the geoid model by the topographic and downward continuation (DWC) corrections in the application of Stokes’s formula. The effects of these errors are assessed by the evaluation of the absolute accuracy of nine independent DEMs for the Iran region. It is shown that the improvement in using the high-resolution Shuttle Radar Topography Mission (SRTM) data versus previously available DEMs in gridding of gravity anomalies, terrain corrections and DWC effects for the geoid model are significant. Based on the Iranian GPS/levelling network data, we estimate the absolute vertical accuracy of the SRTM in Iran to be 6.5 m, which is much better than the estimated global accuracy of the SRTM (say 16 m). Hence, this DEM has a comparable accuracy to a current photogrammetric high-resolution DEM of Iran under development. We also found very large differences between the GLOBE and SRTM models on the range of −750 to 550 m. This difference causes an error in the range of −160 to 140 mGal in interpolating surface gravity anomalies and −60 to 60 mGal in simple Bouguer anomaly correction terms. In the view of geoid heights, we found large differences between the use of GLOBE and SRTM DEMs, in the range of −1.1 to 1 m for the study area. The terrain correction of the geoid model at selected GPS/levelling points only differs by 3 cm for these two DEMs.  相似文献   

8.
In view of the smallness of the atmospheric mass compared to the mass variations within the Earth, it is generally assumed in physical geodesy that the terrain effects are negligible. Subsequently most models assume a spherical or ellipsoidal layering of the atmosphere. The removal and restoring of the atmosphere in solving the exterior boundary value problems thus correspond to gravity and geoid corrections of the order of 0.9 mGal and -0.7 cm, respectively.We demonstrate that the gravity terrain correction for the removal of the atmosphere is of the order of 50µGal/km of elevation with a maximum close to 0.5 mGal at the top of Mount Everest. The corresponding effect on the geoid may reach several centimetres in mountainous regions. Also the total effect on geoid determination for removal and restoring the atmosphere may contribute significantly, in particular by long wavelengths. This is not the case for the quasi geoid in mountainous regions.  相似文献   

9.
When planning a satellite gravity gradiometer (SGG) mission, it is important to know the quality of the quantities to be recovered at ground level as a function of e.g. satellite altitude, data type and sampling rate, and signal variance and noise. This kind of knowledge may be provided either using the formal error estimates of wanted quantities using least-squares collocation (LSC) or by comparing simulated data at ground level with results computed by methods like LSC or Fast Fourier Transform (FFT). Results of a regional gravity field recovery in a 10o×20o area surrounding the Alps using LSC and FFT are reported. Data used as observations in satellite altitude (202 or161 km) and for comparison at ground level were generated using theOSU86F coefficient set, complete to degree 360. These observations are referred to points across simulated orbits. The simulated quantities were computed for a 45 days mission period and 4 s sampling. A covariance function which also included terms above degree 360 was used for prediction and error estimation. This had the effect that the formal error standard deviation for gravity anomalies were considerably larger than the standard deviations of predicted minus simulated quantities. This shows the importance of using data with frequency content above degree 360 in simulation studies. Using data at202 km altitude the standard deviation of the predicted minus simulated data was equal to8.3 mgal for gravity and0.33 m for geoid heights.  相似文献   

10.
Ellipsoidal geoid computation   总被引：1，自引：1，他引：0  
Modern geoid computation uses a global gravity model, such as EGM96, as a third component in a remove–restore process. The classical approach uses only two: the reference ellipsoid and a geometrical model representing the topography. The rationale for all three components is reviewed, drawing attention to the much smaller precision now needed when transforming residual gravity anomalies. It is shown that all ellipsoidal effects needed for geoid computation with millimetric accuracy are automatically included provided that the free air anomaly and geoid are calculated correctly from the global model. Both must be consistent with an ellipsoidal Earth and with the treatment of observed gravity data. Further ellipsoidal corrections are then negligible. Precise formulae are developed for the geoid height and the free air anomaly using a global gravity model, given as spherical harmonic coefficients. Although only linear in the anomalous potential, these formulae are otherwise exact for an ellipsoidal reference Earth—they involve closed analytical functions of the eccentricity (and the Earths spin rate), rather than a truncated power series in e2. They are evaluated using EGM96 and give ellipsoidal corrections to the conventional free air anomaly ranging from –0.84 to +1.14 mGal, both extremes occurring in Tibet. The geoid error corresponding to these differences is dominated by longer wavelengths, so extrema occur elsewhere, rising to +766 mm south of India and falling to –594 mm over New Guinea. At short wavelengths, the difference between ellipsoidal corrections based only on EGM96 and those derived from detailed local gravity data for the North Sea geoid GEONZ97 has a standard deviation of only 3.3 mm. However, the long-wavelength components missed by the local computation reach 300 mm and have a significant slope. In Australia, for example, such a slope would amount to a 600-mm rise from Perth to Cairns.  相似文献   

11.
A synthetic [simulated] Earth gravity model (SEGM) of the geoid, gravity and topography has been constructed over Australia specifically for validating regional gravimetric geoid determination theories, techniques and computer software. This regional high-resolution (1-arc-min by 1-arc-min) Australian SEGM (AusSEGM) is a combined source and effect model. The long-wavelength effect part (up to and including spherical harmonic degree and order 360) is taken from an assumed errorless EGM96 global geopotential model. Using forward modelling via numerical Newtonian integration, the short-wavelength source part is computed from a high-resolution (3-arc-sec by 3-arc-sec) synthetic digital elevation model (SDEM), which is a fractal surface based on the GLOBE v1 DEM. All topographic masses are modelled with a constant mass-density of 2,670 kg/m3. Based on these input data, gravity values on the synthetic topography (on a grid and at arbitrarily distributed discrete points) and consistent geoidal heights at regular 1-arc-min geographical grid nodes have been computed. The precision of the synthetic gravity and geoid data (after a first iteration) is estimated to be better than 30 μ Gal and 3 mm, respectively, which reduces to 1 μ Gal and 1 mm after a second iteration. The second iteration accounts for the changes in the geoid due to the superposed synthetic topographic mass distribution. The first iteration of AusSEGM is compared with Australian gravity and GPS-levelling data to verify that it gives a realistic representation of the Earth’s gravity field. As a by-product of this comparison, AusSEGM gives further evidence of the north–south-trending error in the Australian Height Datum. The freely available AusSEGM-derived gravity and SDEM data, included as Electronic Supplementary Material (ESM) with this paper, can be used to compute a geoid model that, if correct, will agree to in 3 mm with the AusSEGM geoidal heights, thus offering independent verification of theories and numerical techniques used for regional geoid modelling.Electronic Supplementary Material Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00190-005-0002-z  相似文献   

12.
Summary Basically two different evaluation methods are available to compute geoid heights from residual gravity anomalies in the inner zone: numerical integration and least squares collocation.If collocation is not applied to a global gravity data set, as is usually the case in practice, its result will not be equal to the numerical integration result. However, the cross covariance function between geoid heights and gravity anomalies can be adapted such that the geoid contribution is computed only from a small gravity area up to a certain distance o from the computation point. Using this modification, identical results are obtained as from numerical integration.Applying this modification makes the results less dependent on the covariance function used. The difference between numerical integration and collocation is mainly caused by the implicitly extrapolated residual gravity anomaly values, outside the original data area. This extrapolated signal depends very much on the covariance function used, while the interpolated values within the original data area depend much less on it.As a sort of by-product, this modified collocation formula also leads to a new combination technique of numerical integration and collocation, in which the optimizing practical properties of both methods are fully exploited.Numerical examples are added as illustration.  相似文献   

13.
A method is presented with which to verify that the computer software used to compute a gravimetric geoid is capable of producing the correct results, assuming accurate input data. The Stokes, gravimetric terrain correction and indirect effect formulae are integrated analytically after applying a transformation to surface spherical coordinates centred on each computation point. These analytical results can be compared with those from geoid computation software using constant gravity data in order to verify its integrity. Results of tests conducted with geoid computation software are presented which illustrate the need for integration weighting factors, especially for those compartments close to the computation point. Received: 6 February 1996 / Accepted: 19 April 1997  相似文献   

14.
The Global Positioning System (GPS) is considered in conjunction with a strapdown Inertial Measurement Unit (IMU) for measuring the gravity vector. A comparison of this system in space and on an airborne platform shows the relative importance of each system element in these two different acceleration environments. With currently available instrumentation, the acceleration measurement accuracy is the deciding factor in space, while on an Earth-bound (including airborne) platform, the attitude error of the IMU is most critical. A simulation shows that GPS-derived accelerations in space can be accurate to better than 0.1mgal for a 30s integration time, leading to estimates of 1° mean gravity anomalies on the Earth's surface with an accuracy of 4–5 mgal. On an airborne platform, the horizontal gravity estimation error is tightly coupled to the attitude error of the platform, which can only be bounded by external attitude updates. Horizontal gravity errors of 5mgal are achievable if the attitude is maintained to an accuracy of 1arcsec.  相似文献   

15.
In this study, ERS-1 altimeter data over the Indian offshore have been processed for deriving marine geoid and gravity. Processing of altimeter data involves corrections for various atmospheric and oceanographic effects, stacking and averaging of repeat passes, cross-over correction, removal of deeper earth and bathymetric effects, spectral analyses and conversion of geoid into free-air gravity anomaly. Methods for generation of residual geoid and free-air gravity anomaly using high resolution ERS-1 168 day repeat altimeter data were developed. High resolution detailed geoid maps, gravity anomaly and their spectral components have been generated over the Indian offshore using ERS-I altimeter data and ARCGIS system. A number of known megastructures over the study area have been successfully interpreted e.g. Bombay High, Saurastra platform, 90° east ridge etc. from these maps.  相似文献   

16.
The vertical component obtained from the Global Positioning System (GPS) observations is from the ellipsoid (a mathematical surface), and therefore needs to be converted to the orthometric height, which is from the geoid (represented by the mean sea level). The common practice is to use existing bench marks (around the four corners of a project area and interpolate for the rest of the area), but in many areas bench marks may not be available, in which case an existing geoid undulation is used. Present available global geoid undulation values are not generally as detailed as needed, and in many areas they are not known better than ±1 to ±5 m, because of many limitations. This article explains the difficulties encountered in obtaining precise geoid undulation with some example computations, and proposes a technique of applying corrections to the best available global geoid undulations using detailed free-air gravity anomalies (within a 2° × 2° area) to get relative centimeter accuracy. Several test computations have been performed to decide the optimal block sizes and the effective spherical distances to compute the regional and the local effects of gravity anomalies on geoid undulations by using the Stokes integral. In one test computation a 2° × 2° area was subdivided into smaller surface elements. A difference of 37.34 ± 1.6 cm in geoid undulation was obtained over the same 2° × 2° area when 1° × 1° block sizes were replaced by a combination of 5' × 5' and 1' × 1' subdivision integration elements (block sizes).  相似文献   

17.
In precise geoid determination by Stokes formula, direct and primary and secondary indirect terrain effects are applied for removing and restoring the terrain masses. We use Helmert's second condensation method to derive the sum of these effects, together called the total terrain effect for geoid. We develop the total terrain effect to third power of elevation H in the original Stokes formula, Earth gravity model and modified Stokes formula. It is shown that the original Stokes formula, Earth gravity model and modified Stokes formula all theoretically experience different total terrain effects. Numerical results indicate that the total terrain effect is very significant for moderate topographies and mountainous regions. Absolute global mean values of 5–10 cm can be reached for harmonic expansions of the terrain to degree and order 360. In another experiment, we conclude that the most important part of the total terrain effect is the contribution from the second power of H, while the contribution from the third power term is within 9 cm. Received: 2 September 1996 / Accepted: 4 August 1997  相似文献   

18.
One of the principal problems in separating the non-tidal Newtonian gravitational effects from other forces acting on the ocean surface with a resolution approaching the 10 cm level arises as a consequence ofall measurements of a geodetic nature being taken eitherat orto the ocean surface. The latter could be displaced by as much as ±2 m from the equipotential surface of the Earth’s gravity field corresponding to the mean level of the oceans at the epoch of observation— i.e., the geoid. A secondary problem of no less importance is the likelihood of all datums for geodetic levelling in different parts of the world not coinciding with the geoid as defined above. It is likely that conditions will be favourable for the resolution of this problem in the next decade as part of the activities of NASA’s Earth and Ocean Physics Applications Program (EOPAP). It is planned to launch a series of spacecraft fitted with altimeters for ranging to the ocean surface as part of this program. Possible techniques for overcoming the problems mentioned above are outlined within the framework of a solution of the geodetic boundary value problem to ±5 cm in the height anomaly. The latter is referred to a “higher” reference surface obtained by incorporating the gravity field model used in the orbital analysis with that afforded by the conventional equipotential ellipsoidal model (Mather 1974 b). The input data for the solution outlined are ocean surface heights as estimated from satellite altimetry and gravity anomalies on land and continental shelf areas. The solution calls for a quadratures evaluation in the first instance. The probability of success will be enhanced if care were paid to the elimination of sources of systematic error of long wavelength in both types of data as detailed in (Mather 1973 a; Mather 1974 b) prior to its collection and assembly for quadratures evaluations.  相似文献   

19.
The determination of the gravimetric geoid is based on the magnitude of gravity observed at the surface of the Earth or at airborne altitude. To apply the Stokes’s or Hotine’s formulae at the geoid, the potential outside the geoid must be harmonic and the observed gravity must be reduced to the geoid. For this reason, the topographic (and atmospheric) masses outside the geoid must be “condensed” or “shifted” inside the geoid so that the disturbing gravity potential T fulfills Laplace’s equation everywhere outside the geoid. The gravitational effects of the topographic-compensation masses can also be used to subtract these high-frequent gravity signals from the airborne observations and to simplify the downward continuation procedures. The effects of the topographic-compensation masses can be calculated by numerical integration based on a digital terrain model or by representing the topographic masses by a spherical harmonic expansion. To reduce the computation time in the former case, the integration over the Earth can be divided into two parts: a spherical cap around the computation point, called the near zone, and the rest of the world, called the far zone. The latter one can be also represented by a global spherical harmonic expansion. This can be performed by a Molodenskii-type spectral approach. This article extends the original approach derived in Novák et al. (J Geod 75(9–10):491–504, 2001), which is restricted to determine the far-zone effects for Helmert’s second method of condensation for ground gravimetry. Here formulae for the far-zone effects of the global topography on gravity and geoidal heights for Helmert’s first method of condensation as well as for the Airy-Heiskanen model are presented and some improvements given. Furthermore, this approach is generalized for determining the far-zone effects at aeroplane altitudes. Numerical results for a part of the Canadian Rocky Mountains are presented to illustrate the size and distributions of these effects.  相似文献   

20.
Knudsen 《Journal of Geodesy》1987,61(2):145-160
The estimation of a local empirical covariance function from a set of observations was done in the Faeroe Islands region. Gravity and adjusted Seasat altimeter data relative to theGPM2 spherical harmonic approximation were selected holding one value in celles of1/8°×1/4° covering the area. In order to center the observations they were transformed into a locally best fitting reference system having a semimajor axis1.8 m smaller than the one ofGRS80. The variance of the data then was273 mgal 2 and0.12 m 2 respectively. In the calculations both the space domain method and the frequency domain method were used. Using the space domain method the auto-covariances for gravity anomalies and geoid heights and the cross-covariances between the quantities were estimated. Furthermore an empirical error estimate was derived. Using the frequency domain method the auto-covariances of gridded gravity anomalies was estimated. The gridding procedure was found to have a considerable smoothing effect, but a deconvolution made the results of the two methods to agree. The local covariance function model was represented by a Tscherning/Rapp degree-variance model,A/((i−1)(i−2)(i+24))(R B /R E )2i+2, and the error degree-variances related to the potential coefficient setGPM2. This covariance function was adjusted to fit the empirical values using an iterative least squares inversion procedure adjusting the factor A, the depth to the Bjerhammar sphere(R E −R B ), and a scale factor associated with the error degree-variances. Three different combinations of the empirical covariance values were used. The scale factor was not well determined from the gravity anomaly covariance values, and the depth to the Bjerhammar sphere was not well determined from geoid height covariance values only. A combination of the two types of auto-covariance values resulted in a well determined model.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号