An experimental study of magnetite-titanomagnetite interdiffusion     

R. Freer  Z. Hauptman 《Physics of the Earth and Planetary Interiors》1978,16(3):223-231

Interdiffusion experiments were performed between Fe₃O₄ (single crystal) and Fe_2.8Ti_0.2O₄ (powder), under self-buffering conditions (temperature range 600–1034°C), and for various oxygen potentials at 1400°C. Profiles of Fe and Ti were obtained by electronprobe microanalysis, and the interdiffusion coefficient $\text{D}$ was calculated by the Boltzmann-Matano method. Low-temperature data at 3 mole% Ti could be described by $\text{D}\text{= (3.85}{}_{\mathrm{?1.11}}{}^{\mathrm{+1.68}}\text{) × 10}{}^{\mathrm{?3}}\text{exp}\text{(2.23 ± 0.04}\text{eV}\text{/kT)}\text{cm}{}^2\text{/}\text{s}$. An estimate is given for the time to interdiffuse 2μm at various temperatures, and the results compared with recent experiments.  相似文献   

Orthogonality of spherical harmonic coefficients     

Malcolm G. McLeod 《Physics of the Earth and Planetary Interiors》1980,23(2):P1-P4

An essentially arbitrary function V(θ, λ) defined on the surface of a sphere can be expressed in terms of spherical harmonics $\text{V(θ, Λ) = a}\text{∑}\text{n=1}\text{∞}\text{∑}\text{m=0}\text{n}\text{p}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{(cos θ) (g}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{cos mΛ + h}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{sin mΛ)}$ where the P_n^m are the seminormalized associated Legendre polynomials used in geomagnetism, normalized so that $\text{〈[P}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{(cos θ) cos mΛ]〉}{}^2\text{=1/}\text{(2n+1)}$ The angular brackets denote an average over the sphere. The class of functions V(θ, λ) under consideration is that normally of interest in physics and engineering. If we consider an ensemble of all possible orientations of our coordinate system relative to the sphere, then the coefficients g_n^m and h_n^m will be functions of the particular coordinate system orientation, but $\text{〈:(g}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{)}{}^2\text{〉) = 〈(h}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{)}{}^2\text{=}\text{S}{}_{\mathrm{n}}\text{/}\text{(2n=1)}$ where $\text{S}{}_{\mathrm{n}}\text{=}\text{∑}\text{m=0}\text{n}\text{[(g}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{)}{}^2\text{+ (h}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{)}{}^2\text{]}$ for any orientation of the coordinate system (S_n is invariant under rotation of the coordinate system). The averages are over all orientations of the system relative to the sphere. It is also shown that 〈g^m_ng^l_p〉 = 〈h^m_nh^l_p〉 = 0 for l ≠ m or p ≠ n and 〈g^m_nh^l_p〉 = 0 fro all n, m, p, l.  相似文献   

Spatial power spectra of the crustal geomagnetic field and core geomagnetic field     

Malcolm G. McLeod  Paul J. Coleman 《Physics of the Earth and Planetary Interiors》1980,23(2):P5-P19

Lowes (1966, 1974) has introduced the function R_n defined by $\text{R}{}^{\mathrm{n}}\text{=(n + 1)}\text{∑}\text{m=0}\text{∞}\text{[(g}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{)}{}^2\text{+ (h}{}^{\mathrm{m}}{}_{\mathrm{n}}\text{)}{}^2\text{]}\text{where}\text{g}{}_{\mathrm{n}}{}^{\mathrm{m}}\text{and}\text{h}{}_{\mathrm{n}}{}^{\mathrm{m}}$ are the coefficients of a spherical harmonic expansion of the scalar potential of the geomagnetic field at the Earth's surface. The mean squared value of the magnetic field B = ??V on a sphere of radius r > α is given by $\text{〈}\text{B}\text{·〉 =}\text{∑}\text{n=1}\text{∞}\text{R}{}^{\mathrm{n}}\text{(}\text{a/}\text{r}\text{)}{}^{\mathrm{2n=4}}\text{where}\text{a}$ is the Earth's radius. We refer to R_n as the spherical harmonic spatial power spectrum of the geomagnetic field.In this paper it is shown that Rⁿ = R^M_n = R^C_n where the components R_n^M due to the main (or core) field and R_n^C due to the crustal field are given approximately by $\text{R}{}^{\mathrm{M}}{}_{\mathrm{n}}\text{= [}\text{(n =1)/}\text{(n + 2)}\text{](1.142 × 10}{}^9\text{)(0.288}{}^{\mathrm{n}}\text{Λ}{}^2\text{R}{}^{\mathrm{C}}{}_{\mathrm{n}}\text{= [}\text{(n =1){[1 — exp(-n/290)]/}\text{(n/290)} 0.52 Λ}{}^2\text{where}\text{Iγ = 1 nT}$. The two components are approximately equal for n = 15.Lowes has given equations for the core and crustal field spectra. His equation for the crustal field spectrum is significantly different from the one given here. The equation given in this paper is in better agreement with data obtained on the POGO spacecraft and with data for the crustal field given by Alldredge et al. (1963).The equations for the main and crustal geomagnetic field spectra are consistent with data for the core field given by Peddie and Fabiano (1976) and data for the crustal field given by Alldredge et al. The equations are based on a statistical model that makes use of the principle of equipartition of energy and predicts the shape of both the crustal and core spectra. The model also predicts the core radius accurately. The numerical values given by the equations are not strongly dependent on the model.Equations relating average great circle power spectra of the geomagnetic field components to R_n are derived. The three field components are in the radial direction, along the great circle track, and perpendicular to the first two. These equations can, in principle, be inverted to compute the R_n for celestial bodies from average great circle power spectra of the magnetic field components.  相似文献   

High-pressure recovery of olivine: implications for creep mechanisms and creep activation volume     

S. Karato  M. Ogawa 《Physics of the Earth and Planetary Interiors》1982,28(2):102-117

High-temperature and high-pressure recovery experiments were made on experimentally deformed olivines at temperatures of 1613–1788 K and pressures of 0.1 MPa to 2.0 GPa. In the high-pressure experiments, a piston cylinder apparatus was used with BN and NaCl powder as the pressure medium, and the hydrostatic condition of the pressure was checked by test runs with low dislocation density samples. No dislocation multiplication was observed. The kinetics of the dislocation annihilation process were examined by different initial dislocation density runs and shown to be of second order, i.e. where ρ is the dislocation density, k₀ is a constant, $\text{E}{}^1\text{and}\text{V}{}^1$ are the activation energy and volume respectively, and P, R and T are pressure, gas constant and temperature, respectively. Activation energy and volume were estimated from the temperature and pressure dependence of the dislocation annihilation rate as $\text{E}{}^1\text{=389±59}\text{kJ mol}{}^{\mathrm{?1}}$ and $\text{V}{}^1\text{=14±2}\text{cm}{}^3\text{mol}{}^{\mathrm{?1}}$, respectively.The diffusion constants relevant to the dislocation annihilation process were estimated from a theoretical relation k=αD where $\text{k=k}{}_0\text{exp}\text{[?(E}{}^1\text{+ PV}{}^1\text{)/RT], D}$ is the diffusion constant and α is a non-dimensional constant of ca. 300. The results agree well with the self-diffusion constant of oxygen in olivine. This suggests that the dislocation annihilation is rate-controlled by the (oxygen) diffusion-controlled dislocation climb.The mechanisms of creep in olivine and dry dunite are examined by using the experimental data of static recovery. It is suggested that the creep of dry dunite is rate-controlled by recovery at cell walls or at grain boundaries which is rate-controlled by oxygen diffusion. Creep activation volume is estimated to be 16±3 cm³ mol^?1.  相似文献   

High-temperature anelasticity and elasticity of mantle peridotite     

H. Berckhemer  F. Auer  J. Drisler 《Physics of the Earth and Planetary Interiors》1979,20(1):48-59

An apparatus has been devised which allows precise creep and relaxation measurements to be made on minerals and rocks at temperatures up to 1600°C and at very low deviatoric stresses (1 < σ < 300 bar). This paper is concerned with measurements on mantle peridotite (lherzolite) from Balmuccia (Zone of Ivrea, Italy).The reaction of the sample to a step-like increase in stress is called its “creep function”. It is shown that the creep function contains all the necessary information to derive the spectra of the quality factor Q(ω) and of Young's modulus E(ω), within the seismic range of frequencies, provided the material behaves as a linear system. This has been proven up to a strain of 5 × 10^?5.The Q^?1-spectra at 1200 and 1300°C, obtained by Fourier inversion from the creep function, show no pronounced peak in the frequency band 0.01 < tf < 1 Hz and exhibit a general tendency to decrease slightly with frequency. The creep function: ?(t) = ?_u · [1 + 3.7 · q · {(1 + 50t)^0.27 ? }], where q is related to Q, satisfactorily describes the data at high temperatures and leads to $\text{Q}{}^{\mathrm{?1}}\text{(ω, T) = 3 × 10}{}^3\text{· ω}{}^{\mathrm{<mtext>?0.27\; ·\; </mtext><mtext>exp</mtext>}}\text{(}\text{?30}\text{RT}\text{)}$E(ω) is related to Q(ω) by the material dispersion equation. Above 1100°C the unrelaxed Young's modulus decreases rapidly with temperature according to an activation energy of about 20 kcal/mole. A lowering of short period S-wave velocity by 40% and P-wave velocity by 10% occurs below the solidus. Therefore, no partial melting is required in the asthenosphere.Steady-state creep at low axial stresses (20 < σ < 100 bar), obtained from the same rock, follows the relation $\text{?}\text{?}\text{= 3 × 10}{}^7\text{· δ}{}^{1.4}\text{·}\text{exp}\text{(}\text{?125}\text{RT}\text{)}$ indicative of grain boundary diffusion or superplasticity. At higher stresses a power law $\text{?}\text{?}\text{= 45 · δ}{}^4\text{·}\text{exp}\text{(}\text{?125}\text{RT}\text{)}$ typical of dislocation creep, is found.The frequency dependence of Q and the ratio of the activation energies of Q and are indicative of so called “high-temperature background absorption”, as the dominant mechanism, and of a diffusion-controlled dislocation mobility common to both absorption and creep. From a, b, and c, relations between the effective viscosity η_f and Q of the form: $\text{log}\text{η}{}_{\mathrm{e??}}\text{=}\text{1}\text{α}\text{·}\text{log}\text{Q ? (n ? 1) ·}\text{log}\text{ω +}\text{log}\text{D}$ are derived, where α ～ 0.25, n is the power of σ, and D is a constant.  相似文献   

General relationships among sound speeds: II. Theory and discussion     

T.J. Shankland  D.H. Chung 《Physics of the Earth and Planetary Interiors》1974,8(2):121-129

The dependence of bulk sound speed V_φ upon mean atomic weight $\text{m}$ and density ρ can be expressed in a single equation: Here B is an empirically determined “universal” parameter equal to 1.42, $\text{m}{}_0\text{= 20.2}$, a reference mean atomic weight for which well-determined elastic properties exist, and λ = 1.25 is a semi empirical parameter equal to $\text{γ ?}\text{1}\text{3}$ where γ is a Grüneisen parameter. The constant c = (? ln V_M/? ln $\text{m}\text{)}{}_{\mathrm{X}}$, where V_M is molar volume, is in general different for different crystal structure series and different cation substitutions. However, it is possible to use c_Fe = 0.14 for Fe²⁺Mg²⁺ and GeSi substitutions and c_Ca ? 1.3 for CaMg substitutional series. With these values it is pos to deduce from the above equation Birch's law, its modifications introduced by Simmons to account for Ca-bearing minerals, variations in the seismic equation of state observed by D.L. Anderson, and the apparent proportionality of bulk modulus K to V_M^?4.  相似文献   

Physical constraints for the analysis of the geomagnetic secular variation     

Loren Shure  Kathy Whaler  David Gubbins  Bruce Hobbs 《Physics of the Earth and Planetary Interiors》1983,32(2):114-131

Slow changes in the magnetic field are believed to originate in the core of the Earth. Interpretation of these changes requires knowledge both of the vertical component of the field and of its rate of change at the core-mantle boundary (CMB). While various spherical harmonic models show some agreement for the field at the CMB, those for secular variation (SV) do not. SV models depend heavily on annual means at relatively few and poorly distributed magnetic observatories. In this paper, the SV at the CMB is modelled by fitting 15-year differences in the annual means of the X, Y and Z components (from 1959 to 1974). The model is made unique by imposing the constraint that $\text{?}{}_{\mathrm{CMB}}\text{B}\text{?}{}_{\mathrm{r}}{}^2\text{d}\text{S}$ be a minimum, using the method of Shure et al. (1982). If SV is attributed to motions of core fluid, then this model will yield, in some sense, the slowest core motions. The null space is determined by the distribution of observations, and therefore, to be consistent, only those observatories have been retained which recorded almost continuously throughout the interval 1959–1974.The method allows misfit between the model and the observations. The best value for the misfit can be derived from estimates of errors in the data, or alternatively, because larger misfit leads to smoother models (i.e., smaller $\text{?}\text{B}\text{?}{}_{\mathrm{r}}{}^2\text{d}\text{S}$), the best value can be estimated subjectively from the final appearance of the model. Both procedures have their counterparts in the conventional spherical harmonic expansion approach, when smoothing is achieved by lowering the truncation level. The new proposal made in this paper is to use objective criteria for determining the misfit, based on the assumption that diffusion is negligible, in which event all integrals $\text{∫}\text{B}\text{?}{}_{\mathrm{r}}{}^2\text{d}\text{S}$ will vanish when S_i is a region on the CMB bounded by a contour of zero vertical component of field. For the 1965 definitive model which is adopted here, and for most other contemporary models, there are six such areas, giving five independent integrals (the integrals over the six regions must sum to zero if ? · B = 0). Tabulating these integrals for various choices of the misfit gives minimum values near 2 nT y^?1. It is impossible to achieve this good a fit to the data using a reasonable model derived by truncating the spherical harmonic expansion. The value 2 nT y^?1 corresponds to errors of ～ 20 nT in individual annual means, which is rather larger than expected from the scatter in the data.  相似文献   

Variation of the magnetic properties in a basaltic dyke with concentric cooling zones     

B.M Smith  M Prévot 《Physics of the Earth and Planetary Interiors》1977,14(2):120-136

The effects of the variation of magnetic grain size on the magnetic properties of rocks have been studied throughout a reversely magnetized basaltic dyke with concentric cooling zones.Except in a few tachylites in which the magnetic mineral is a Ti-rich titanomagnetite, in the bulk of the dyke the magnetization is carried by almost pure magnetite grains. Although the percentage p of these magnetic oxides varies slightly, the large changes in the various magnetic parameters observed across the dyke are essentially attributable to large variations in the grain size of the magnetic particles.From the outer scoria region, where the magnetic grains are a mixture of single-domain (SD) and superparamagnetic (SP) grains, to the tachylite zone with finely crystallized basaltic glass containing interacting elongated SD particles, one observes an increase of both the ratio of the saturation remanent magnetization and the saturation induced magnetization J_rs/J_is, the bulk coercive force H_c, the median destructive field MDF, the intensity of the remanent magnetization J_r, and the Koenigsberger ratio Q. In the tachylites these parameters reach unusually high values, for subaerial basalts: These parameters decrease in the basalt toward the centre of the dyke where pseudo-single-domain (pseudo-SD) particles coexist together with multidomain (MD) grains. The susceptibility remains approximately constant from the inner basalt to the tachylite, but increases in the scoria up to values 10 times higher owing to the presence of SP particles. The magnetic viscosity increases also drastically toward the margin of the dyke due to an increase of the fraction of the SD particles just above the superparamagnetic threshold.  相似文献   

High-pressure phase transformations and compressions of ilmenite and rutile,I. Experimental results     

Lin-Gun Liu 《Physics of the Earth and Planetary Interiors》1975,10(2):167-176

Natural ilmenite (Fe,Mg)TiO₃ has been found to transform to the perovskite structure and then to disproportionate into its component oxides, (Fe,Mg)O plus a cubic phase of TiO₂, at loading pressures of 140 and 250 kbar respectively, and at temperatures of 1,400 to 1,800°C. Samples were compressed in a diamond-anvil press and heated by irradiation with a YAG laser. The lattice parameters of the perovskite phase of (Fe,Mg)TiO₃ at room temperature and 1 bar are $\text{a}{}_0\text{= 4.471 ± 0.004, b}{}_0\text{= 5.753 ± 0.005,}\text{and}\text{c}{}_0\text{= 7.429 ± 0.006}\text{A}\text{?}$ with 4 molecules per cell. The zero-pressure volume change is 8.0% for the ilmenite-perovskite transition, 13.3% for the perovskite-mixed-oxides transition, and 20.2% for the ilmenite-mixed-oxides transition. The cubic phase of TiO₂ can be indexed on the basis of space group Fm3m with $\text{Z = 4}\text{and}\text{a}{}_0\text{= 4.455 ± 0.008}\text{A}\text{?}$ at room temperature and 1 bar, which corresponds to a decrease in zero-pressure volume of 29.2% for the rutile-cubic-phase transition. An isentropic bulk modulus at zero pressure of 5.75 ± 0.30 Mbar and a pressure derivative greater than 8 were calculated for the high-pressure cubic phase. The calculated bulk modulus for the mixture of (Fe,Mg)O and cubic TiO₂ is 2.48 ± 0.25 Mbar. All the phase transformations, the calculated lattice parameters, and the bulk moduli observed in this study are in good agreement with published shock-Hugoniot data for ilmenite and rutile.  相似文献   

The cooling Earth: A reappraisal     

Frank D. Stacey 《Physics of the Earth and Planetary Interiors》1980,22(2):89-96

By treating the lithosphere as a diffusive boundary layer to mantle convection, the convective speed or mantle creep rate, $\text{?}\text{?}$, can be related to the mantle-derived heat flux, $\text{Q}\text{?}$. If cell size is independent of $\text{Q}\text{?}{}^2$ then $\text{?}\text{?}\text{∝}\text{Q}\text{?}$. (If cell size varies with $\text{Q}\text{?}$, then a different power law prevails, but the essential conclusions are unaffected.) Then the factthat for constant thermodynamic efficiency of mantle convection, the mechanical power dissipation is proportionalto $\text{Q}\text{?}$, gives convective stress $\text{σ ∝}\text{Q}\text{?}{}^{\mathrm{?1}}$, i.e. the stress increases as the convection slows. This means an increasing viscosityor stiffness of the mantle which can be identified with a cooling rate in terms of a temperature-dependent creep law. If we suppose that the mantle was at or close to its melting point within 1 or 2 × 10⁸ years of accretionof the Earth, the whole scale of cooling is fixed. The present rate of cooling is estimated to be about 4.6 × 10^?8 deg y^?1 for the average mantle temperature, assumed to be 2500 K, but this very slow cooling rate represents a loss ofresidual mantle heat of 7 × 10¹² W, about 30% of the total mantle-derived heat flux. This conclusion requires theEarth to be deficient in radioactive heat, relative to carbonaceous chondrites. A consideration of mantle outgassing and atmospheric argon leads to the conclusion that the deficiency is due to depletion of potassium, and that the K/U ratio of the mantle is only about 2500, much less than either the crustal or carbonaceous chondritic values. Thetotal terrestrial potassium is estimated to be about 6 × 10²⁰ kg. Acceptance of the cooling of the Earth removes the necessity for potassium in the core.  相似文献   

Melting temperature distribution and fractionation in the lower mantle     

Eiji Ohtani 《Physics of the Earth and Planetary Interiors》1983,33(1):12-25

The melting curve of perovskite MgSiO₃ and the liquidus and solidus curves of the lower mantle were estimated from thermodynamic data and the results of experiments on phase changes and melting in silicates.The initial slope of the melting curve of perovskite MgSiO₃ was obtained as $\text{d}\text{T}{}_{\mathrm{<mtext>m</mtext>}}\text{/}\text{d}\text{P?77}\text{K}\text{GPa}{}^{\mathrm{?1}}$ at 23 GPa. The melting curve of perovskite was expressed by the Kraut-Kennedy equation as $\text{T}{}_{\mathrm{<mtext>m</mtext>}}\text{(}\text{K}\text{)=917(}\text{1+29.6ΔV}\text{V}{}_0\text{)}$, where T_m?2900 K and P?23 GPa; and by the Simon equation, $\text{P(}\text{GPa}\text{)?23=21.2[}\text{(T}{}_{\mathrm{<mtext>m</mtext>}}\text{(}\text{K}\text{)}\text{2900)}{}^{1.75}\text{?1}\text{]}$.The liquidus curve of the lower mantle was estimated as $\text{T}{}_{\mathrm{<mtext>liq</mtext>}}\text{? 0.9 T}{}_{\mathrm{<mtext>m</mtext>}}$ (perovskite) and this gives the liquidus temperature T_liq=7000 ±500 K at the mantle-core boundary. The solidus curve of the lower mantle was also estimated by extrapolating the solidus curve of dry peridotite using the slope of the solidus curve of magnesiowüstite at high pressures. The solidus temperature is ～ 5000 K at the base of the lower mantle. If the temperature distribution of the mantle was 1.5 times higher than that given by the present geotherm in the early stage of the Earth's history, partial melting would have proceeded into the deep interior of the lower mantle.Estimation of the density of melts in the MgOFeOSiO₂ system for lower mantle conditions indicates that the initial melt formed by partial fusion of the lower mantle would be denser than the residual solid because of high concentration of iron into the melt. Thus, the melt generated in the lower mantle would tend to move downward toward the mantle-core boundary. This downward transportation of the melt in the lower mantle might have affected the chemistry of the lower mantle, such as in the D″ layer, and the distribution of the radioactive elements between mantle and core.  相似文献   

A statistical comparison of the outflow of N+2, NO+ and O+2 molecular ions with that of atomic O+ ions using Polar/TIMAS observations     

《Journal of Atmospheric and Solar》2000,62(6):477-483

  相似文献   

Synthesis of a new high-pressure ohase of tin dioxide and some geophysical implications     

Lin-Gun Liu 《Physics of the Earth and Planetary Interiors》1974,9(4):338-343

Tin dioxide (SnO₂) in the rutile structure as starting material has been found to transform to the orthorhombic α-PbO₂ structure (S.G. Pbcn) at about 155 kbar and 1000–1400°C when compressed in a diamond-anvil cell and heated by irradiation with a YAG laser. The lattice parameters at room temperature and 1 bar are $\text{a}{}_{\mathrm{<mtext>o</mtext>}}\text{= 4.719 ± 0.002, b}{}_{\mathrm{<mtext>o</mtext>}}\text{= 5.714 ± 0.002,}\text{and}\text{c}{}_{\mathrm{<mtext>o</mtext>}}\text{= 5.228 ± 0.002}\text{A}\text{?}\text{with}\text{Z = 4}$ for the orthorhombic form of SnO₂, which is 1.5% more dense than the rutile form. Crystal-chemical arguments suggest that stishovite (SiO₂) may also transform to the α-PbO₂ structure at elevated pressure and temperature with an increase in zero-pressure density of about 2–3%. Mineral assemblages containing the orthorhombic SiO₂ are unstable relative to those containing the perovskite MgSiO₃ under lower-mantle conditions.  相似文献   

Applications of liquid state physics to the Earth's core     

D.J. Stevenson 《Physics of the Earth and Planetary Interiors》1980,22(1):42-52

By use of the modern theory of liquids and some guidance from the hard-sphere model of liquid structure, the following new results have been derived for application to the Earth's outer core. (1) dK/$\text{d}\text{P ? 5 ? 5. 6P}$/K, where K is the incompressibility and P the pressure. This is valid for a high-pressure liquid near its melting point, provided that the pressure is derived primarily from a strongly repulsive pair potential φ. This result is consistent with seismic data, except possibly in the lowermost region of the outer core, and demonstrates the approximate universality of dK/dP proposed by Birch (1939) and Bullen (1949). (2) dlnT_M/dlnρ = (γC_V ? 1)/($\text{C}{}_{\mathrm{<mtext>V</mtext>}}\text{?}\text{3}\text{2}\text{),}\text{where}\text{T}{}_{\mathrm{<mtext>M</mtext>}}$ is the melting point, ρ the density, γ the atomic thermodynamic Grüneisen parameter and C_V the atomic contribution to the specific heat in units of Boltzmann's constant per atom. This reduces to Lindemann's law for C_V = 3 and provides further support for the approximate validity of this law. (3) It follows that the “core paradox” of Higgins and Kennedy can only occur if $\text{γ <}\text{2}\text{3}$. However, it is shown that $\text{γ <}\text{2}\text{3}\text{? ∫}{}^{\mathrm{\infty }}{}_0\text{(?g/?T)}{}_{\mathrm{\rho }}\text{r(}\text{d}\text{/}\text{d}\text{r)(r}{}^2\text{φ)}\text{d}\text{r > 0}$, which cannot be achieved for any strongly repulsive pair potential φ and the corresponding pair distribution function g. It is concluded that $\text{γ >}\text{2}\text{3}$ and that the core paradox is almost certainly impossible for any conceivable core composition. Approximate calculations suggest that γ ～ 1.3–1.5 in the core. Further work on the thermodynamics of the liquid core must await development of a physically realistic pair potential, since existing pair potentials may be unsatisfactory.  相似文献   

Source mechanism of the 1906 San Francisco earthquake     

Ari Ben-Menahem 《Physics of the Earth and Planetary Interiors》1978,17(2):163-181

Surface-wave amplitudes in the period range 50–100 s at eight European and North American stations, horizontal slip profiles along the rupture zone and the timing of certain events along the fault during rupture time are all engaged in unison to reconstruct the motion at the source. A modified source model is used to accommodate a moving rupture with variable dislocation in the direction of propagation.It is inferred that the rupture started at about 13 h 11 m 55 s GMT near San Juan Bautista and propagated unilaterally northwestward along N35°W over 400 km with an average rupture velocity of 3.5 km/s. At 13 h 12 m 12 s, the dynamic shear front, moving with the rupture speed, hit the Lick Observatory. Then, at 13 h 12 m 18 s, the rupture arrived to the vicinity of the epicenter in the Santa Cruz Mountains given by B. Bolt. There the slip changed sharply from an average of 0.5 m to a high value of 3 m causing extensive landslides and avalanches. At 13 h 12 m 32.5 s two railroad clocks at San Rafael were stopped. Finally, at 13 h 12 m 36 s the offset front hit the Naval Observatory at Mare Island and stopped the astronomical clocks there. Conspicuous surface waves, visible on Wiechert seismograms in Europe in the period range 55–65 s, reflect the true rupture time.The seismic data inversion yields an effective radiation source some 240 km long with an average vertical extent of some 34 km over a total fault length of 400 km ($\text{U}\text{d}\text{S ? 29,000}\text{m km}{}^2\text{or}\text{μ}\text{U}\text{d}\text{S ? 9 · 10}{}^{27}\text{dyn cm}$). It began at the Santa Cruz Mountains and ended some 20 km off coast Point Arena. Thus, due to the nonuniform slip profile, only $\text{3}\text{5}$ of the total fracture length contributed to the far radiation field.Although the product of the average source displacement (over the entire fault) and the vertical extent appears to be fairly well determined from the surface-wave spectrums, the separate values of these entities cannot be uniquely determined. If the average surface displacements (～ 3.2 m) are diagnostic of the entire fault, a vertical extent of H = 34 km is required.Finally, a new analysis of surface waves from the Alaska earthquake of July 10, 1958, the Queen Charlotte Islands earthquake of August 22, 1949 and the Kern County shock of July 21, 1952, enables us to draw parallels between the three biggest major events which occurred along the NE Pacific coast during 1906–1958. A common feature of all of these earthquakes is that vertical failure extents of 30–40 km are implied.  相似文献   

On the relationship between meteor height and ambipolar diffusion     

《Journal of Atmospheric and Solar》2004,66(11):899-906

  相似文献   

Présence d'eaux anciennes dans les eaux du forage de N'Tarla,région de Koutiala (république du mali)     

Claude Jusserand 《Journal of Hydrology》1976,30(3):287-292

The N'Tarla bore-hole groundwaters show an ${}^{18}\text{O}{}^{16}\text{O}$ isotopic composition different from the mean weighted value of precipitations in this region. On the basis of ¹⁴C bicarbonate activity and tritium content, a mixing process of recent and ancient waters is assessed.  相似文献   

Earthquake similarity laws     

Ari Ben-Menahem 《Physics of the Earth and Planetary Interiors》1977,15(1):P10-P18

Source parameters of 27 major shallow earthquakes in the magnitude range 7.0–8.6, which occurred during 1906–1969, are used to establish dimensionless invariants involving the fault dimensions, average slip, and the rise time. It is found that these entities are expressible as simple functions of the subsonic shear Mach number (M) and the cube root of the seismic potency, $\text{(}\text{U}\text{S)}{}^{\mathrm{<mtext>1</mtext><mtext>3</mtext>}}$. Moreover, a new principle is suggested according to which all dimensionless numbers which can be constructed from the basic fault elements are simple powers of the contraction factor $\text{(1-M}{}^2\text{)}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$ with coefficients of the order unity. The laws of dynamical similarity thus found are those appropriate for subsonic rupture in which the Mach number is very close to unity and the radiation efficiency is between $\text{1}\text{6}$ and $\text{1}\text{3}$. The empirical similarity laws are shown to be compatible with a source model in which the fault plane is simulated by a flexible membrane with additional restoring stiffness forces provided by an elastic medium attached to it on one side. Results suggest the possibility that earthquake rupture, together with the radiation of seismic waves, terminates at the moment that Mach 1 is reached.  相似文献   

High temperature creep of an orthorhombic perovskite—YAlO3     

《Physics of the Earth and Planetary Interiors》1999,110(1-2):51-69

  相似文献   

Flow at high Reynolds numbers through anisotropic porous media     

Amitzur Z. Barak  Jacob Bear 《Advances in water resources》1981,4(2):54-66

An approximate expression is developed for the relationship between the hydraulic gradient (J), the specific discharge (q) and fluid and porous matrix properties in the case of saturated, steady and uniform (macroscopic) flow of a Newtonian liquid at high Reynolds numbers through a homogeneous anisotropic porous medium: In this expression, the tensors w⁽²⁾, B⁽⁴⁾ and C⁽³⁾ denote properties of the solid matrix only. The tensors W⁽²⁾, and C⁽³⁾ are symmetrical; the tensor B⁽⁴⁾ is symmetrical only in the first and last pairs of indices. It seems that no mathematical expression with a finite number of parameters exists, which can serve as a universal exact expression for the sought relationship between J and q.  相似文献