首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
—We present a 2-D image of the upper mantle attenuation using nuclear explosion data from the ultra-long refraction/reflection profile "Quartz." Our analysis is based on a modified common spectrum technique followed by least-squares inversion for Q and iterative ray tracing in the velocity structure obtained earlier. The resulting attenuation structure corroborates the earlier model for northern Eurasia, as well as our recent estimate based on the analysis of the long-range P n phase, and provides significantly more detail than the existing models. The resulting upper mantle attenuation structure is characterised by Q values ranging from 400 to 1800. Down to the depths of 150–190, and probably 400 km, the attenuation increases horizontally in SE direction, away from the Baltic Shield. Our model exhibits strong 2-D, vertical and horizontal attenuation contrasts. A high-attenuation layer in the depth range of 120–150 to 160–180 km can apparently be associated with the presence of a partial melts within the base of the lithosphere.  相似文献   

2.
The short-period S-wave attenuation field has been mapped for the lithosphere of the Altai and adjacent areas in Mongolia and southern Siberia. A total of approximately 500 earthquake seismograms were used. These were recorded at the Makanchi and Ulan-Bator stations at distances of ~300–1900 km. It is shown that the attenuation of shear waves is much stronger in the west of the area of study compared with the east. A V-shaped band of high attenuation in the upper mantle has been identified in the west of the area where the epicenters of the magnitude 6.9 1990 Zaisan and the magnitude 7.3 2003 Chuya earthquakes were situated; a similar band extends northwestward to the west of Lake Ubsu Nur. The attenuation is comparatively low in the rupture zones of large (М ≥ 7.0) pre-1970 earthquakes. It was concluded that fluid-charged zones are formed in the lithosphere prior to large earthquakes in the Altai, as well as in other areas of Central Asia. Following large seismic events, the fluids were rising into the crust from the upper mantle during a few tens of years, thus reducing the attenuation of Sn waves. We have identified zones of high attenuation with no significant earthquakes being recorded there during historical time. It is our opinion that earthquake precursory processes may be occurring in these zones.  相似文献   

3.
—?The digital data acquired by 16 short-period seismic stations of the Friuli-Venezia-Giulia seismic network for 56 earthquakes of magnitude 2.3–4.7 which occurred in and near NE Italy have been used to estimate the coda attenuation Q c and seismic source parameters. The entire area under study has been divided into five smaller regions, following a criterion of homogeneity in the geological characteristics and the constrains imposed by the distribution of available events. Standard IASPEI routines for coda Q c determination have been used for the analysis of attenuation in the different regions showing a marked anomaly in the values measured across the NE border between Friuli and Austria for Q 0 value. A large variation exists in the coda attenuation Q c for different regions, indicating the presence of great heterogeneities in the crust and upper mantle of the region. The mean value of Q c (f) increases from 154–203 at 1.5?Hz to 1947–2907 at 48?Hz frequency band with large standard deviation estimates.¶Using the same earthquake data, the seismic-moment, M 0, source radius, r and stress-drop, Δσ for 54 earthquakes have been estimated from P- and S-wave spectra using the Brune's seismic source model. The earthquakes with higher stress-drop (greater than 1?Kbar) occur at depths ranging from 8 to 14?km.  相似文献   

4.
Records of deep-focus Hindu Kush earthquakes in the depth ranges 70–110 and 190–230 km made by 45 digital and analogue seismic stations were analyzed to study the attenuation field of short period seismic waves in the lithosphere of central Tien Shan. The dynamic characteristics studied include the ratio of peak amplitudes in S and P waves (S/P) and the ratio of the S-wave maximum to the coda level in the range t = 400 ± 5 s, where t is the lapse time (S/c400) for 1.25 Hz. Comparatively high values of S/P are shown to prevail in most of the area, corresponding to lower S-wave attenuation. Upon this background is a band of high and intermediate attenuation in the west of the area extending along the Talas-Fergana fault in the south and afterwards turning north-northeast. The rupture areas of the two largest (M ≥ 7.0) earthquakes which have occurred in Tien Shan during the last 25 years are confined to this band. Abnormally high values of S/c400 were obtained for stations situated in the rupture zone of the August 19, 1992, magnitude 7.3 Suusamyr earthquake and around it. For two of the stations we found considerable time variations in the coda envelope before the earthquake. The effective Q was derived from compressional and shear wave data for the entire area, as well as for the band of high attenuation. Comparison with previous data shows that the attenuation field in the area has changed appreciably during 20–25 years, which can only be due to a rearrangement of the fluid field in the crust and uppermost mantle. It is hypothesized that a large earthquake is very likely to occur in the northern part of the attenuating band.  相似文献   

5.
Short-period seismograms are synthesized for PKP phases in anelastic Earth models. The synthetics were constructed using a synthetic technique valid at grazing incidence, a source-time function appropriate for deep-focus earthquakes, and an instrument response for either a short-period WWSSN or SRO seismograph. The agreement between predicted and observed amplitudes and spectral ratios requires neither a low-Qα zone at 0.2–2 Hz nor a low or negative P-velocity gradient at the bottom of the outer core. Thin low-Qα zones beneath the inner core boundary fit spectral ratio data that sample the upper 200 km of the inner core but fail to fit data that sample the lower inner core. Only a model having Qα?1?[0.003, 0.004] at 0.2–2 Hz, nearly constant with depth in the inner core, satisfies all of the spectral ratio and amplitude data. The assumption of a bulk viscosity of 10-103 Pa s for the liquid phase of a partially molten inner core combined with the observation of low shear attenuation in the inner core at frequencies less than 0.005 Hz limit the physical parameters associated with two possible attenuation mechanisms: (1) fluid flow and viscous relaxation due to ellipsoidally shaped inclusions of melt, and (2) the solid-liquid phase transformation induced by the stress change during the passage of a seismic wave. Both mechanisms require an order of 0.1% partial melt to reproduce the observed Qα?1. In the outer core, the time constant of the mechanism of phase transformation is predicted to be 104–106 s. Confirmation of small shear attenuation in the inner core in the frequency band of seismic body waves would favor the mechanism of phase transformation.  相似文献   

6.
We employ a niching genetic algorithm to invert ∼30,000 differential ScS/S attenuation values for a new spherically symmetric radial model of shear quality factor (Qμ) with high sensitivity to the lower mantle. The new radial Qμ model, QLM9, possesses greater sensitivity to Qμ at large mantle depths than previous studies. On average, lower mantle Qμ increases with depth, which supports models of increasing viscosity with depth [B.M. Steinberger, A.R. Calderwood. Mineral physics constraints on viscous flow models of mantle flow, J. Conf. Abs., 6, 2001., 2001.]. There are two higher-Qμ regions at ∼1000 and ∼2500 km depth, which roughly correspond to high-viscosity regions observed by Forte and Mitrovica [A.M. Forte and J.X. Mitrovica, Deep-mantle high-viscosity flow and thermochemical structure inferred from seismic and geodynamic data, Nature 410, 1049–1056, 2001.]. There is a lower-Qμ layer at the core–mantle boundary and a relatively low-Qμ region in the mid-lower mantle. With several caveats, we infer a divergence of the solidus and geotherm in the lower mantle and a convergence within Dʺ by relating Qμ to homologous temperature.  相似文献   

7.
Average shear-velocity models for the upper mantle have been derived by controlled Monte Carlo inversion of global average Rayleigh wave group velocity (GAGV) data for periods between 50 and 300 seconds. GAGV data have been corrected for attenuative dispersion using a method based on the theory of Liu, Anderson and Kanamori. Two types of model bounds have been used with one- or two-layer low-velocity zones beginning at depths of 70 and 100 km. All models fitting GAGV data within one standard deviation have low-velocity zones in the 100–200 km depth range. Models with low-velocity zones beginning at 70 km, as well as 100 km, fit GAGV data within one standard deviation, so the average thickness of the lithosphere (taken as the depth to the top of the low-velocity zone) cannot be determined with precision.Global average models for shear-wave attenuation (Q?1β) have been derived from global average Rayleigh wave attenuation coefficients for periods between 50 and 300 s and average shear-velocity models. Zones of high Q?1β coincide with the low-velocity zones of all shear-velocity models, however, models with low-velocity zones beginning at a depth of 70 km have the highest-attenuation layer in the lower half of the low-velocity zone. Resolution kernels for these attenuation models show that parameters for layers shallower than the lower part of the low-velocity-high-attenuation zone are strongly coupled but are distinct from the lower part of this zone. This suggests that the deeper part of the low-velocity-high-attenuation zone is the most mobile part of the zone or that on the average, the top of the zone is deeper than 70 km.The average Qβ of the lithosphere, low-velocity zone, and sub-low-velocity layer (asthenosphere) are approximately 200, 85–110 and 170–200, respectively.  相似文献   

8.
Long-range seismic sounding carried out during the last few years on the territory of the U.S.S.R. has shown a basic inhomogeneity of the uppermost mantle, as well as evidence of regularities in the distribution of its seismic parameters. The following data were used: times and apparent velocities of P- and S-waves for investigation of mantle velocities, converted waves for seismic discontinuity model studies and wave attenuation for Q-factor estimation. Strong regularities were distinguished in the distribution of average seismic velocities for the uppermost mantle, in their dependence on the age and type of geostructure and on their position relative to the central part of the continent. Old platforms and the inner part of the continent are marked by velocities under the Mohorovi?i? discontinuity of more than 8.2–8.3 km s?1, young platforms and outer parts of the continent by 8.0–8.2 km s?1, and orogenic and rift zones by 7.8–8.0 km s?1. The difference becomes more pronounced at a depth of about 100–200 km: for the old platform mantle velocities of 8.5–8.6 km s?1 are typical; beneath the orogenic and rift areas, inversion zones with velocities less than 7.8 km s?1 are observed.The converted waves show fine inhomogeneities of the crust and uppermost mantle, the presence of many discontinuities with positive and negative changes of velocity, and anisotropy of seismic waves in some of the layers. Wave attenuation allowed the determination of the Q-factor in the mantle. It varied from one region to another but a close relation between Q and P-wave velocity is the main cause of its variation.  相似文献   

9.
A method is presented to derive pure path attenuation coefficients of Rayleigh waves, in the period range 30–90 s, across the Tibet Plateau, using events located within Tibet and observed at teleseismic distances. This method uses data from 2 events and 2 stations simultaneously, these being aligned along a great circle path, and, for relatively small events, is practically free of errors due to inaccurate knowledge of the source radiation patterns.In spite of large standard errors due to the impossibility of separating effects of anclasticity from spurious effects on amplitudes such as scattering or multipathing, results seem to indicate an anelastic model of the crust and upper mantle compatible with shear velocity models derived independently, with a thick crust and in particular, a thick high Q lid and thin low Q zone consistent with a shield like upper mantle beneath Tibet.  相似文献   

10.
Based on the long period surface wave data recorded by the China Digital Seismograph Network (CDSN), theQ R of fundamental mode Rayleigh wave with periods from 10 s to 146 s is determined for the eastern Sino-Korean paraplatform in this paper. TheQ β models of the crust and upper mantle are respectively obtained for the 4 paths, with the aid of stochastic inverse method. It shows that in the eastern Sino-Korean paraplatform, the average crustalQ β is about 200, and that there exists a weak attenuation layer in the middle crust (about 10–20 km deep) which is possibly related to earthquake-prone layer. A strong attenuation layer (lowQ) of 70 km thick extensively exists in the uppermost mantle, with the buried depth about 80 km. The averageQ R of fundamental mode Rayleigh wave is between the value of stable tectonic region and that of active tectonic region, and much close to the latter.  相似文献   

11.
Partial melting of mantle peridotite generates a physically and chemically layered oceanic lithosphere that is cycled back into the mantle in subduction zones. Stirring times of the mantle are too long to allow for complete re-homogenization of subducted basalt and harzburgite, given the low chemical diffusivity of the solid mantle. This suggests that the Earth's mantle is a mechanical mixture of basaltic and harzburgitic components. Using a recently developed thermodynamic formulism we determine the phase equilibria and the seismic properties of a mantle comprised of a mechanical mixture of basalt and harzburgite (MM) and a homogeneous mantle (EA) with identical pyrolitic bulk chemistry. We use the theoretical shear velocity profiles as a new thermometer of the mantle below the magma-genetic zone by modeling the difference ΔT410-660 between traveltimes of shear wave reflections off the 410-km and 660-km with the potential temperature TP. ΔT410-660 are measured from waveform stacks. They indicate that, over 1000+ km wave lengths, the temperature varies by about 200 K. Lowest and highest temperatures are resolved for the western Pacific subduction zones and the central Pacific, respectively. This variation is similar for the EA and MM and is in excellent agreement with estimates of transition zone thickness and shear velocity variations. The median value of TP for the EA is 1720 K. It is about 1625 K for the MM, a value that is in better agreement with the Normal-MORB values of 1610 ± 40 K inferred from olivine-liquid equilibria given that our sampling region encompasses the Western Pacific subduction zones and the oldest parts of the Pacific Plate. We argue therefore that a mechanical mixed mantle, with generally higher velocities and steeper velocities gradients, represents a better physical reference model than a model based on a fully equilibrated assemblage.  相似文献   

12.
Multi-phase long-period t* measurements are among the key evidences for the frequency-dependent mantle attenuation factor, Q. However, similarly to Q, poorly constrained variations of Earth’s structure may cause spurious frequency-dependent effects in the observed t*. By using an attenuation-coefficient approach which incorporates measurements of geometric spreading (GS), such effects can be isolated and removed. The results show that the well-known increase of body P-wave t* from ~0.2 s at short periods to ~1–2 s at long periods may be caused by a small and positive bias in the underlying GS, which is measured by a dimensionless parameter γ*?≈?0.06. Similarly to the nearly constant t* at teleseismic distances, this GS bias is practically range-independent and interpreted as caused by velocity heterogeneity within the crust and uppermost mantle. This bias is accumulated within a relatively thin upper part of the lithosphere and may be closely related to the crustal body-wave GS parameter γ?~?4–60 mHz reported earlier. After a correction for γ, P-wave t P * becomes equal ~0.18 s at all frequencies. By using conventional dispersion relations, this value also accounts for ~40 % of the dispersion-related delay in long-period travel times. For inner-core attenuation, the attenuation coefficient shows a distinctly different increase with frequency, which is remarkably similar to that of fluid-saturated porous rock. As a general conclusion, after the GS is accounted for, no absorption-band type or frequency-dependent upper-mantle Q is required for explaining the available t* and velocity dispersion observations. The meaning of this Q is also clarified as the frequency-dependent part of the attenuation coefficient. At the same time, physically justified theories of elastic-wave attenuation within the Earth are still needed. These conclusions agree with recent re-interpretations of several surface, body and coda-wave attenuation datasets within a broad range of frequencies.  相似文献   

13.
The fundamental mode Love and Rayleigh waves generated by ten earthquakes and recorded across the Tibet Plateau, at QUE, LAH, NDI, NIL, KBL, SHL, CHG, SNG and HKG are analysed. Love- and Rayleigh-wave attenuation coefficients are obtained at time periods of 5–120 s using the spectral amplitudes of these waves for 23 different paths. Love wave attenuation coefficient varies from 0.0021 km?1, at a period of 10 s, to 0.0002 km?1 at a period of 90 s, attaining two maxima at time periods of 10 and 115 s, and two minima at time periods of 25 and 90 s. The Rayleigh-wave attenuation coefficient also shows a similar trend. The very low value for the dissipation factor, Qβ, obtained in this study suggests high dissipation across the Tibetan paths. Backus-Gilbert inversion theory is applied to these surface wave attenuation data to obtain average Qβ?1 models for the crust and uppermost mantle beneath the Tibetan Plateau. Independent inversion of Love- and Rayleigh-wave attenuation data shows very high attenuation at a depth of ～50–120 km (Qβ ? 10). The simultaneous inversion of the Love and Rayleigh wave data yields a model which includes alternating regions of high and low Qβ?1 values. This model also shows a zone of high attenuating material at a depth of ～40–120 km. The very high inferred attenuation at a depth of ～40–120 km supports the hypothesis that the Tibetan Plateau was formed by horizontal compression, and that thickening occurred after the collision of the Indian and Eurasian plates.  相似文献   

14.
Rayleigh wave attenuation is investigated for periods ranging from 20 to 90 s, along a 450 km-long profile following the Oligocene tensile zone of the French Massif Central. A model is deduced by inversion, assuming that the S-wave intrinsic quality factor Qβ is frequency-independent, and yields a mean value Qβ = 43 ± 10 for the first 100 km in the upper mantle. This value, far lower than the mean value obtained in Eurasia, is close to those obtained in other recent tensile areas, e.g., the western United States or mid-oceanic ridges.A velocity-depth model for S-waves, deduced in a previous study from surface-wave propagation, has been corrected for the attenuation effect. We find a discrepancy between the corrected S-model and P-wave residuals in the same area, implying that Qβ must be frequency-dependent. This can be a clue for partial melting in the upper mantle beneath this region.  相似文献   

15.
The junction between lithosphere and asthenosphere for the oceanic and continental mantles is usually defined as the depth where the shear velocity suddenly decreases. It now also appears reasonable to define the junction in terms of a sudden increase in the dissipating properties of the lower of the two boundary materials. Using new data for the suboceanic upper mantle it is possible to deduce the relative thinning of the lithosphere under the oceans compared to the continents from the variation with frequency of the Rayleigh wave specific attenuation factorQγ?1.  相似文献   

16.
A worldwide study of short-period teleseismic body wave spectra shows that the high frequency falloff rates of spectra are correlated with the tectonic type of the source and receiver regions and with source depth. The data indicate, in a consistent manner, that the main cause for such variations is the lateral variation of Q in the upper mantle as well as change of Q with depth. Using the internal consistency checks provided by redundancies in the data set other effects such as crustal, site dependent distortion of the spectra, source effects and instrument non-linearity can be ruled out as significant factors influencing the t1 estimates obtained. The results indicate high attenuation in the upper mantle under tectonic regions and new oceans. Long-period regional attenuation studies indicate similar variations in mantle Q among the types of regions mentioned but yield significantly lower Q estimates in all areas. The short- and long-period attenuation results can be reconciled only by assuming a frequency dependent Q that increases with frequency along all types of paths, such that the relative differences in Q along various types of paths retain the same sign over the short- and long-period bands.  相似文献   

17.
Variability of the Earth’s structure makes a first-order impact on attenuation measurements which often does not receive adequate attention. Geometrical spreading (GS) can be used as a simple measure of the effects of such structure. The traditional simplified GS compensation is insufficiently accurate for attenuation measurements, and the residual GS appears as biases in both Q 0 and η parameters in the frequency-dependent attenuation law Q(f) = Q 0 f η . A new interpretation approach bypassing Q(f) and using the attenuation coefficient χ(f) = γ + πf/Q e(f) resolves this problem by directly measuring the residual GS, denoted γ, and effective attenuation, Q e. The approach is illustrated by re-interpreting several published datasets, including nuclear-explosion and local-earthquake codas, Pn, and synthetic 50–300-s surface waves. Some of these examples were key to establishing the Q(f) concept. In all examples considered, χ(f) shows a linear dependence on the frequency, γ ≠ 0, and Q e can be considered frequency-independent. Short-period crustal body waves are characterized by positive γ SP values of (0.6–2.0) × 10?2 s?1 interpreted as related to the downward upper-crustal reflectivity. Long-period surface waves show negative γ LP ≈ ?1.9 × 10?5 s?1, which could be caused by insufficient modeling accuracy at long periods. The above γ values also provide a simple explanation for the absorption band observed within the Earth. The band is interpreted as apparent and formed by levels of Q e ≈ 1,100 within the crust decreasing to Q e ≈ 120 within the uppermost mantle, with frequencies of its flanks corresponding to γ LP and γ SP. Therefore, the observed absorption band could be purely geometrical in nature, and relaxation or scattering models may not be necessary for explaining the observed apparent Q(f). Linearity of the attenuation coefficient suggests that at all periods, the attenuation of both Rayleigh and Love waves should be principally accumulated at the sub-crustal depths (~38–100 km).  相似文献   

18.
The outer core is assumed to consist of iron and sulfur, with a small amount of potassium that generates heat by radioactive decay of sim||pre|40 K. Two cases are considered, corresponding respectively to a high rate of heat production (Q = 2 · 1012 cal./sec, about 0.1% K), and to a low rate (Q = 2 · 1011 cal./sec). The temperature at a depth of 2800 km in the mantle is taken to be 3300°K (Wang, 1972). The temperature Tc at the core-mantle boundary depends on whether or not a density gradient in the lowermost layer D″ of the mantle prevents convection in that layer. In the first case, and for high Q, Tc = 4500–5000°K. In the second case, or for low Q, Tc ≈ 3500°K.The heat-conduction equation is used to calculate the temperature Ti at the inner-core boundary in the absence of convection. For high Q, Ti ? Tc ≈ 1600°K; for low Q, Ti ? Tc ≈ 160°K. Corresponding temperature gradients at r = rc and r = ri are listed in Table I.The adiabatic gradient at the top of the core is calculated by the method of Stewart (1970). It strongly depends on the parameters (ρ0, c0, γ0, etc.) that characterize core material at low pressure. Stewart has drawn graphs that allow the selection of sets of parameters that are consistent with seismic velocities and a given density distribution in the core. Some acceptable sets of parameters are listed in Table II. Many sets yield temperatures Tc in the range 3500–5000°K; some give an adiabatic gradient steeper than the conductive gradient and are compatible with convection; others do not. Since properties of FeS melts remain unknown, there is at present no way of selecting any set in preference to another.Properties of the FeS system at low pressure suggest the possible appearance of immiscibility at high temperature in liquids of low sulfur content; accordingly, the inner-core boundary is thought to represent equilibrium between a solid (FeNi) inner core and a liquid layer containing only a small amount of sulfur; layer F in turn is in equilibrium with another liquid (forming layer E) containing more sulfur, and slightly less dense, than F. The temperature Ti at the inner-core boundary is about 6000–6500°K for high Q and Tc ≈ 4500–5000°K. It is consistent with Alder's (1966) and Leppaluoto's (1972) estimates of the melting point of iron at 3.3 Mbar, but not with that of Higgins and Kennedy (1971).  相似文献   

19.
A total number of 46 local earthquakes (2.0≤ML≤4.0) recorded in the period 2000–2011 by the Egyptian seismographic network (ENSN) were used to estimate the total (Qt−1), intrinsic (Qi−1) and scattering attenuation (Qsc−1) in Cairo metropolitan area, Egypt. The multiple lapse time window analysis (MLTWA) under the assumption of multiple isotropic scattering with uniform distribution of scatters was firstly applied to estimate the pair of Le−1, the extinction length inverse, and B0, the seismic albedo, in the frequency range 3–24 Hz. To take into account the effect of a depth-dependent earth model, the obtained values of B0 and Le−1 were corrected for an earth structure characterized by a transparent upper mantle and a heterogeneous crust. The estimated values of Qt−1, Qsc−1 and Qi−1 exhibited frequency dependences. The average frequency-dependent relationships of attenuation characteristics estimated for the region are found to be: Qt−1=(0.015±0.008)f (−1.02±0.02), Qsc−1=(0.006±0.001)f (−1.01±0.02), and Qi−1=(0.009±0.008)f (−1.03±0.02); showing a predominance of intrinsic absorption over scattering attenuation. This finding implies that the pore-fluid contents may have great effect on the attenuation mechanism in the upper crust where the River Nile is passing through the study area. The obtained results are comparable with those obtained in other tectonic regions.  相似文献   

20.
Free oscillation and body wave data are used to construct average Q models for the earth. The data set includes fundamental and overtone observations of the radial, spheroidal and toroidal modes, ScS observations and amplitudes of body waves as a function of distance. The preferred model includes a low-Q zone at both the top and the bottom of the mantle. In these regions the seismic velocities are likely to be frequency dependent in the “seismic” band. Absorption in the mantle is predominantly due to losses in shear. Compressional absorption may be important in the inner core.A grain-boundary relaxation model is proposed that explains the dominance of shear over compressional dissipation, the roughly frequency independent average values for Q and the variation of Q with depth. In the high-Q regions, the lithosphere and the midmantle (200–2000 km), Q is predicted to be frequency dependent. However, the low-Q regions of the earth, where Q is roughly frequency independent, dominate the observations of attenuation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号