首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 781 毫秒
1.
Abstract— Physical properties were determined in a first step on post‐impact tertiary limestones from the depth interval of 404–666 m of the Yaxcopoil‐1 (Yax‐1) scientific well, drilled in the Chicxulub impact crater (Mexico). Thermal conductivity, thermal diffusivity, density, and porosity were measured on 120 dry and water‐saturated rocks with a core sampling interval of 2–2.5 m. Nondestructive, non‐contact optical scanning technology was used for thermal property measurements including thermal anisotropy and inhomogeneity. Supplementary petrophysical properties (acoustic velocities, formation resisitivity factor, internal surface, and hydraulic permeability) were determined on a selected subgroup of representative samples to derive correlations with the densely measured parameters, establishing estimated depth logs to provide calibration values for the interpretation of geophysical data. Significant short‐ and long‐scale variations of porosity (1–37%) turned out to be the dominant factor influencing thermal, acoustic, and hydraulic properties of this post impact limestone formation. Correspondingly, large variations of thermal conductivity, thermal diffusivity, acoustic velocities, and hydraulic permeability were found. These variations of physical properties allow us to subdivide the formation into several zones. A combination of experimental data on thermal conductivity for dry and water‐saturated rocks and a theoretical model of effective thermal conductivity for heterogeneous media have been used to calculate thermal conductivity of mineral skeleton and pore aspect ratio for every core under study. The results on thermal parameters are the necessary basis for the determination of heat flow density, demonstrating the necessity of dense sampling in the case of inhomogeneous rock formations.  相似文献   

2.
We suppose the transport of energy in a sunspot (or pore) is described by a diffusion process. The thermal conductivities in the spot and its surroundings are assumed to be constant and isotropic, but with a reduced conductivity in the spot. The sunspot and the ambient medium are represented by semi-infinite strips of variable depth, with one common boundary. This interface is a plane inclined at an arbitrary angle with respect to the vertical in order to simulate the inclined magnetic field at the umbral/penumbral, penumbral/photospheric or pore/photospheric boundary.We show that the region with high conductivity below the interface produces a thermal disturbance in the surface layers of the umbra which manifests itself as a temperature enhancement at the umbral surface in a region near the boundary, resulting in a decreased temperature contrast across the surface. The thermal disturbance in the neighboring medium is confined to a very small region.The National Center for Atmospheric Research is sponsored by the National Science Foundation.  相似文献   

3.
Abstract— Within the frame of the International Continental Deep Drilling Program (ICDP) and as a part of the Chicxulub Scientific Drilling Project (CSDP), high resolution temperature measurements were performed in the borehole Yaxcopoil‐1 (Yax‐1). The temperature was logged to the depth of 858 m seven times between March 6–19, 2002, starting 10 days after the hole was shut in and mud circulation ceased. Successive logs revealed only small temperature variations in time and space, indicating a fast temperature recovery to almost undisturbed conditions prior to the first log. From these logs, a mean temperature gradient of ～37 mK/m was determined below the uppermost 250 m. Another temperature log was recorded on May 24, 2003 (15 months after the shut in) to a depth of 895 m. The obtained temperature profile is very similar to the 2002 profile, with an insignificantly higher mean gradient below 250 m that may indicate a long‐term return to the pre‐drilling temperature. The temperature in the uppermost part of the hole bears signs of considerable influence of a convective contribution to the vertical thermal heat transfer. The depth extent of the convection seems to have deepened from 150 m in March 2002 to 230 m in May 2003. Based on the observed temperature gradient and the rock types encountered in the borehole above 670 m, the conducted heat flow is expected to be in the range 65–80 mW/m2.  相似文献   

4.
Climatic temperature changes at the ground surface propagate downward to the subsurface creating transient disturbances to the temperature—depth (T(z)) profile. Due to the poor thermal diffusivity of rocks the disturbances are preserved long times in the bedrock, and in a conductive regime it is possible to reveal the ground surface temperature (GST) history from borehole temperature data with inversion techniques. Geothermal temperature measurements thus provide a source of palaeoclimatic information which so far has not been utilized extensively. Inversion of GST history is, however, not straightforward and any disturbing effects should be excluded before the data can be utilized in inversion. Groundwater flow is of special importance in this respect because it is a common phenomenon in bedrock and convection often produces temperature—depth profiles resembling those affected by palaeoclimatic GST changes. In interpreting temperature—depth (T(z)) logs it is therefore not always clear whether the recorded vertical gradient variations should be attributed to the effects of palaeoclimatic ground surface temperature (GST) changes or to groundwater circulation. Using several synthetic T(z) profiles and applying general least squares inversion techniques we simulate a situation of “misinterpreting” the curvature of the T(z) profile in terms of palaeoclimatic GST changes, although it is actually produced by convective heat transfer due to groundwater flow. For comparison the opposite case is also studied, namely, genuine palaeoclimatic effects are misinterpreted as being due to disturbances caused by groundwater flow. A homogeneous half-space model is used to model T(z) profiles disturbed conductively by GST changes during the time interval 10–10000 yr B.P. and a one-dimensional porous layer model is applied for convective heat transfer calculations. The results indicate that a given T(z) profile can be attributed to either of these effects with reasonable parameter values. In addition to the synthetic T(z) profiles, a case history from a 958 m deep drill hole at Lavia, southwestern Finland, is presented. Special care is needed in analyzing T(z) data. A knowledge of geothermal data, such as temperature, thermal conductivity and diffusivity is not necessarily adequate for determining which of the phenomena (or whether a combination of them) provides the most probable interpretation of a T(z) profile. Additional information on the hydrogeological properties of the drilled strata is essential.  相似文献   

5.
The temperature profile of the KTB pilot drillhole, T(z)KTB-PH,is distinctly nonlinear: a temperature deficit ΔT (relative to a linear temperature-depth profile) is especially pronounced in the depth range 500–3500 m. The depth dependence of the deficit, Δ(z) is compared to be anticipated effect of surface paleoclimatic variations, ΔTpc(z), at the drillsite on the temperature profile. The latter can be calculated from available paleo-climatic models. If ΔTpc(z) is added to T(z)KTB-PH, a nearly linear temperature-depth curve results with an average geothermal gradient of 27.9°C/km. This, together with an average vertical thermal conductivity of 3.0 W/mK, estimated from KTB drillcore data, implies a heat flow density at the KTB site of 84 mW/m2. This modelled value is in good agreement with heat flow determinations in the adjacent Eger graben structure (Western Bohemian massif).  相似文献   

6.
Stephen J. Keihm 《Icarus》1984,60(3):568-589
A detailed model of the lunar regolith is analyzed to examine the feasibility of an orbital mapping of heat flow using microwave radiometers. For regolith thermal and electrical properties which are representative of Apollo findings, brightness temperature observations in the bandλ = 5–30 cm would be required for heat flow analysis. Spectral variations shortward of 5 cm are controlled primarily by the temperature dependencies of the thermal conductivity and electrical absorption within the diurnal-varying layer. For wavelengths longer than 30 cm, unwanted emission from high impedance subregolith layers can be significant and size limitations on spacecraft radiometers is a factor. Over the 5- to 30-cm band, lunation-averaged brightness temperature increases of 2–10°K are predicted for heat flow values representative of the Apollo measurements. The magnitude of this increase depends directly on the value of regolith microwave absorption. For absorption values consistent with Apollo laboratory measurements, a spectral increase of 5°K is predicted. This value is considered marginally sufficient for an orbital heat flow measurement. However, important non-heat flow effects must be accounted for. Spectral variations can occur due to surface topography and subsurface scattering. For nadir viewing, surface roughness effects are not expected to be significant and topographic effects are nearly constant with wavelength for λ > 5cm. Volume scattering due to subsurface rock fragments can cause emission darkening of 1–6°K. However, spectral variations will not be large unless the distribution of scatterer sizes is sharply skewed. For the Moon, the most serious spurious effect appears to be emissivity variations due to the near-surface density gradient. A brightness temperature decrease of 10°K is predicted from centimeter to decameter wavelengths. If the transition from porous surface fines to compacted regolith soil occurs rapidly (within the upper 3–5 cm), most of the emissivity decrease will occur in the 5- to 30-cm wavelength band. It is recommended that complementary radar measurements be utilized to augment constraints on regolith emissivity and scattering properties.  相似文献   

7.
Thirty borehole temperature–depth profiles in the central and southern Urals, Russia were scrutinized for evidence of ground surface temperature histories. We explored two inversion schemes: a simple ramp inversion in which solutions are parameterized in terms of an onset time and magnitude of change and a more sophisticated functional space inverse algorithm in which the functional form of the solution is left unspecified. To enhance and potentially identify latitudinal differences in the ground surface temperature signal, we subdivided the data into three groups based on geographic proximity and simultaneously inverted the borehole temperature–depth logs. The simultaneous inversions highlighted 13 temperature–depth logs that could not both fit a common ground surface temperature history and a priori models within reasonable bounds. Our results confirm that this is an effective way to reduce site-specific noise from an ensemble of boreholes. Each inversion scheme gives comparable results indicating locally variable warming on the order of 1°C starting between 1800 and 1900 AD. Similarly surface air temperature records from 12 nearby meteorological stations exhibit locally variable warming also on the order of 1°C of warming during the 20th century. To explore the degree to which borehole temperatures and surface air temperature (SAT) time series are responding to the same signal, we average the SAT data into the same three groups and used these averages as a forcing function at the Earth's surface to generate synthetic transient temperature profiles. Root mean square (RMS) misfits between these synthetic temperature profiles and averaged temperature–depth profiles are low, suggesting that first-order curvature in borehole temperatures and variations in SAT records are correlated.  相似文献   

8.
We analyzed data from 23 boreholes at 19 sites in central and eastern Canada, for the purpose of estimating ground surface temperature (GST) histories. These boreholes were logged down to at least 550 m depth with thermistor probes. Thermal conductivity measurements had been previously made at small depth intervals for the entire depth ranges of most of the boreholes. The temperature profiles of these boreholes do not indicate water disturbance. We estimated terrain effects for each borehole using a time dependent solid-angle method. The thermal perturbations caused by lakes or deforestation near the borehole sites are insignificant in most cases. However, four of the holes were found to be severely influenced by terrain effects. GSTs estimated from the borehole data less influenced by the terraineffects form two groups. The first group, which are generally from data of better quality, show a cold period near the end of the last century before the recent warming trend; the second show it 80–100 years earlier. We consider the former typical of the climate of the Boreal climatic region of Canada. The difference between the two groups may reflect the spacial variability of the climate. Four GST estimates do not belong to either type, and the reasons are discussed.  相似文献   

9.
Functional space inversions (FSI) of precise temperature logs from wells located in low conductivity clastic sediments of the western Canadian Sedimentary Basin show evidence of extensive, recent ground surface temperature (GST) warming. Simultaneous inversion of the data, as well as averaging of the individual site reconstructions, indicate that this high magnitude of GST warming exceeds over two times that of globally averaged GST's [Science 282 (1998) 279] and is significantly higher than that of surface temperature histories based on instrumental records and tree ring reconstruction in northern and western Canada [Holocene 7 (1997) 375; Science 278 (1997) 1251; Clim. Res. 12 (1999) 39].  相似文献   

10.
C.B. Leovy  J.B. Pollack 《Icarus》1973,19(2):195-201
Pollack (1973) has used a radiative equilibrium model to match radiometric data for Titan and infers the atmospheric mass, composition, opacity, and gross vertical thermal structure. These results are used to estimate the atmospheric temperature variations by means of scaling analysis, taking into account dynamics both for a baroclinic wave regime and for an axially symmetric circulation regime. Horizontal temperature variations of the atmosphere and surface are found to be very small, and the circulation is found to be weak and probably axially symmetric. The small temperature variations appear to preclude the storage of volatiles in polar caps, so that the present atmospheric methane content may be due to a balance between outgassing and photodissociation.  相似文献   

11.
A simple analysis shows that the normal assumption of an outward heat flow, together with the normally assumed surface layer of low thermal conductivity, would give rise to microwave emission effects and to local variations in surface temperature which are not in fact observed. It is concluded that either the surface layer must be much thinner than is at present postulated, or that the outward flow of heat must be much smaller than is supposed.  相似文献   

12.
New temperature logs in wells located in the grassland ecozone in the Southern Canadian Prairies in Saskatchewan, where surface disturbance is considered minor, show a large curvature in the upper 100 m. The character of this curvature is consistent with ground surface temperature (GST) warming in the 20th century. Repetition of precise temperature logs in southern Saskatchewan (years 1986 and 1997) shows the conductive nature of warming of the subsurface sediments. The magnitude of surface temperature change during that time (11 years) is high (0.3–0.4°C). To assess the conductive nature of temperature variations at the grassland surface interface, several precise air and soil temperature time series in the southern Canadian Prairies (1965–1995) were analyzed. The combined anomalies correlated at 0.85. Application of the functional space inversion (FSI) technique with the borehole temperature logs and site-specific lithology indicates a warming to date of approximately 2.5°C since a minimum in the late 18th century to mid 19th century. This warming represents an approximate increase from 4°C around 1850 to 6.5°C today. The significance of this record is that it suggests almost half of the warming occurred prior to 1900, before dramatic build up of atmospheric green house gases. This result correlates well with the proxy record of climatic change further to the north, beyond the Arctic Circle [Overpeck, J., Hughen, K., Hardy, D., Bradley, R., Case, R., Douglas, M., Finney, B., Gajewski, K., Jacoby, G., Jennings, A., Lamourex, S., Lasca, A., MacDonald, G., Moore, J., Retelle, M., Smith, S., Wolfe, A., Zielinski, G., 1997. Arctic environmental change of the last four centuries, Science 278, 1251–1256.].  相似文献   

13.
The distribution of temperature and emission measure in the stationary heated solar atmosphere was found for the limiting cases of slow and fast heating, when either the gas pressure or the concentration are constant through the layer depth. Results are relevant to the conditions when the energy injected by waves or by non-thermal particles or in some different way quickly transforms into a thermal flux. Under these conditions the temperature distribution with depth is determined by radiation loss and thermal conductivity, and at any values of energy flux and plasma concentration it is characterized by two universal functions. One of them gives the relation between the energy flux and temperature at the region boundary: the other - the temperature run with the depth. This run is such that a considerable part of the energy is radiated by a thin transition region with a very large temperature gradient.The results may be applied for calculation of the temperature and the emission measure both for the high temperature region of a flare, and for the quiet corona. The dimensionless structure of the transition region is the same for any value of the energy flux. These results concerning solar flares can help to explain the identity of optical spectra for flares of different types, the emission in a wide temperature interval from nearly the same region of space and the very small thickness of the region emitting optical lines. The latter is due to the shell structure of the flare as opposed to the usually assumed filamentary one.  相似文献   

14.
Javier Ruiz 《Icarus》2003,166(2):436-439
The Raz Fossae, a pair of ≈15-km wide trough en echelon interpreted as grabens, can be used to propose an estimation of the depth to the brittle-ductile transition on Triton. This estimation may in turn give an idea of the thermal state of Triton's icy lithosphere when these features formed. Given the young age of its surface, the conclusions obtained could be roughly applicable to the present state of this satellite of Neptune. Considering water or ammonia dihydrate as possible components of the lithosphere and a feasible range of strain rates, it was estimated that surface heat flow is greater than that inferred from radiogenic heating, especially for a lithosphere dominated by water. Also, an internal ocean could lie at a depth of only ∼20 km beneath the surface. The presence over the surface of an insulating layer of ice of low thermal conductivity (e.g., nitrogen) or of regolith would only substantially alter these estimates if the effective surface temperature were considerably higher than the observed value of 38 K.  相似文献   

15.
We developed an iterative method for determining the three-dimensional temperature distribution in a spherical spinning body that is irradiated by a central star. The seasonal temperature change due to the orbital motion is ignored. It is assumed that material parameters such as the thermal conductivity and the thermometric conductivity are constant throughout the spherical body. A general solution for the temperature distribution inside a body is obtained using spherical harmonics and spherical Bessel functions. The surface boundary condition contains a term obtained using the Stefan–Boltzmann law and is nonlinear with respect to temperature because it is dependent on the fourth power of temperature. The coefficients of the general solution are fitted to satisfy the surface boundary condition by using the iterative method. We obtained solutions that satisfy the nonlinear boundary condition within 0.1% accuracy. We calculated the rate of change in the semimajor axis due to the diurnal Yarkovsky effect using the linear and nonlinear solutions. The maximum difference between the rates calculated using the two sets of solutions is 13%. Therefore current understanding of the diurnal Yarkovsky effect based on linear solutions is fairly good.  相似文献   

16.
The effects of vertical variations in density and dielectric constant on nadir-viewing microwave brightness temperatures are examined. Stratification models as well as models of a continuous increase in density with depth are analyzed. Specific applications address the vertical structure of the lunar frontside regolith, utilizing combined constraints from Apollo data, bistatic radar signatures, and Earth-based measurements of the lunar microwave brightness temperature.Results have been analyzed in terms of the effects on the zeroth and first harmonic of the lunar disk-center brightness temperature variation over a lunation, and their wavelength dependence. Lunation-mean brightness temperatures, which are diagnostic of emissivity and steady-state sub-surface temperatures, are sensitive to both near-surface soil density gradients and single high-impedance dielectric contrasts. Models of the rapid density increase in the upper 5–10 cm of the lunar regolith predict brightness temperature decreases of 2–10°K between λ0 = 3 and 30 cm. The magnitude of this spectral variation depends upon the thickness of a postulated low-density surface coating layer, and the magnitude of the density gradient in the transition soil layer. Comparable decreases in brightness temperature can be produced by a stratified two-layer model of soil overlaying bedrock if the high-density substrate lies within 1–2 m of the surface. Multiple soil layering on a centimeter scale, such as is observed in the Apollo core samples, is not likely to induce spectral variations in mean brightness temperature due to rapid regional variations in layer depths and thicknesses.The fractional variation in disk-center brightness temperature over a lunation (first harmonic) can be altered by vertical-structure effects only for the case in which a larger and abrupt dielectric contrast exists within the upper surface layer where the significant diurnal variations in physical temperature occur. Soil density variations do not cause scattering effects sufficient to significantly alter the microwave emission weighting function within the diurnal layer. For the Moon, this layer consists of the upper 10 cm. Since no widespread rock substrate as shallow as 10 cm exists in the lunar frontside, only volume scattering effects, due to buried shallow rock fragments, can explain the apparent high electrical loss inferred from Earth-based measurements of the amplitude of lunation brightness temperature variations.Representative models of the lunar frontside vertical structure have also been examined for their effects of radar cross-section measurements and resultant inferences of bulk dielectric constant. Models of the near-surface density gradient predict a significant increase in the remotely inferred dielectric constant value from centimeter to meter wavelengths. Such a model is in general agreement with the dielectric constant spectrum inferred from Earth-based brightness temperature polarization measurements, but is difficult to reconcile with the Apollo bistatic radar results at λ0 = 13 and 116 cm.  相似文献   

17.
We are using observations obtained with Mars Express to explore the structure and dynamics of the martian lower atmosphere. We consider a series of radio occultation experiments conducted in May-August 2004, when the season on Mars was midspring of the northern hemisphere. The measurements are widely distributed in latitude and longitude, but the local time remained within a narrow range, 17.0-17.2 h. Most of the atmospheric profiles retrieved from these data contain a distinct, well-mixed convective boundary layer (CBL). We have accurately determined the depth of the CBL and its spatial variations at fixed local time through analysis of these profiles. The CBL extends to a height of 3-10 km above the surface at the season and locations of these measurements. Its depth at fixed local time is clearly correlated with variations in surface elevation on planetary scales, with a weaker dependence on spatial variations in surface temperature. In general, the CBL is deep (8-10 km) where the surface elevation is high, as in Tharsis Montes and Syrtis Major, and shallow (4-6 km) where the surface elevation is low, as in Amazonis and Utopia. This variability results from the combined effects of conditions near the surface and in the atmosphere above the CBL. Convection arises from solar heating of the ground, and the impact of this heat source on thermal structure is largest where the surface pressure and atmospheric density are smallest, at high surface elevations. The vertical extent of the CBL is in turn constrained by the static stability of the overlying atmosphere. These results greatly reduce the long-standing uncertainty concerning the depth of the CBL.  相似文献   

18.
The thermo-mechanical properties of planetary surface and subsurface layers control to a high extent in which way a body interacts with its environment, in particular how it responds to solar irradiation and how it interacts with a potentially existing atmosphere. Furthermore, if the natural temperature profile over a certain depth can be measured in situ, this gives important information about the heat flux from the interior and thus about the thermal evolution of the body. Therefore, in most of the recent and planned planetary lander missions experiment packages for determining thermo-mechanical properties are part of the payload. Examples are the experiment MUPUS on Rosetta's comet lander Philae, the TECP instrument aboard NASA's Mars polar lander Phoenix, and the mole-type instrument HP3 currently developed for use on upcoming lunar and Mars missions. In this review we describe several methods applied for measuring thermal conductivity and heat flux and discuss the particular difficulties faced when these properties have to be measured in a low pressure and low temperature environment. We point out the abilities and disadvantages of the different instruments and outline the evaluation procedures necessary to extract reliable thermal conductivity and heat flux data from in situ measurements.  相似文献   

19.
An empirically derived lunar gravity field   总被引：1，自引：0，他引：1  
The heat-flow experiment is one of the Apollo Lunar Surface Experiment Package (ALSEP) instruments that was emplaced on the lunar surface on Apollo 15. This experiment is designed to make temperature and thermal property measurements in the lunar subsurface so as to determine the rate of heat loss from the lunar interior through the surface. About 45 days (1 1/2 lunations) of data has been analyzed in a preliminary way. This analysis indicates that the vertical heat flow through the regolith at one probe site is 3.3 × 10–6 W/cm2 (±15%). This value is approximately one-half the Earth's average heat flow. Further analysis of data over several lunations is required to demonstrate that this value is representative of the heat flow at the Hadley Rille site. The mean subsurface temperature at a depth of 1 m is approximately 252.4K at one probe site and 250.7K at the other. These temperatures are approximately 35K above the mean surface temperature and indicate that conductivity in the surficial layer of the Moon is highly temperature dependent. Between 1 and 1.5m, the rate of temperature increase as a function of depth is 1.75K/m (±2%) at the probe 1 site. In situ measurements indicate that the thermal conductivity of the regolith increases with depth. Thermal-conductivity values between 1.4 × 10–4 and 2.5 × 10–4 W/cm K were determined; these values are a factor of 7 to 10 greater than the values of the surface conductivity. If the observed heat flow at Hadley Base is representative of the moonwide rate of heat loss (an assumption which is not fully justified at this time), it would imply that overall radioactive heat production in the Moon is greater than in classes of meteorites that have formed the basis of Earth and Moon bulk composition models in the past.Lamont-Doherty Geological Observatory Contribution Number 1800.  相似文献   

20.
Presently seven nearby radio-quiet isolated neutron stars discovered in ROSAT data and characterized by thermal X-ray spectra are known. They exhibit very similar properties and despite intensive searches their number remained constant since 2001 which led to their name “The Magnificent Seven”. Five of the stars exhibit pulsations in their X-ray flux with periods in the range of 3.4 s to 11.4 s. XMM-Newton observations revealed broad absorption lines in the X-ray spectra which are interpreted as cyclotron resonance absorption lines by protons or heavy ions and/or atomic transitions shifted to X-ray energies by strong magnetic fields of the order of 1013 G. New XMM-Newton observations indicate more complex X-ray spectra with multiple absorption lines. Pulse-phase spectroscopy of the best studied pulsars RX J0720.4-3125 and RBS 1223 reveals variations in derived emission temperature and absorption line depth with pulse phase. Moreover, RX J0720.4-3125 shows long-term spectral changes which are interpreted as due to free precession of the neutron star. Modeling of the pulse profiles of RX J0720.4-3125 and RBS 1223 provides information about the surface temperature distribution of the neutron stars indicating hot polar caps which have different temperatures, different sizes and are probably not located in antipodal positions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号