首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Rheological heterogeneities in the upper-crust have a close relationship with the fold position where rigid bodies could constitute initial perturbations that allow the nucleation of folds. Consequently, establish the position and geometry of anomalous rocks located in the upper-crust by geophysical studies help to understand the folded structure observed on surface. New geological observations in the field, along with gravity, magnetic, magnetotelluric and seismicity data, reveal the subsurface structure in the Sierra de Los Filabres–Sierra de Las Estancias folded region part of the Alpine belt in southern Spain. The geometry of the upper crust is determined by geological field data, 2D gravity models, 2D magnetic models and 2D MT resistivity model, while seismicity evidences the location of the deep active structures. These results allow us to propose that a basic rock body at 4 to 9 km depth has determined the nucleation and development of the Sierra de Los Filabres kilometric antiform. N-vergent large late folds are subjected to a variable present-day stress field. Earthquake focal mechanisms suggest the presence in depth of a regional NW–SE compressive stress field. However, most of the seismogenetic structures do not extend up to the surface, where NW–SE and WNW–ESE outcropping active normal faults are observed, thus indicating a NE–SW extension in the upper crust simultaneous to orthogonal NW–SE compression related to reverse faults and minor folds developed in the Eastern Almanzora Corridor and in the nearby Huércal–Overa Basin. The recent and active tectonic studies of cordilleras hinterland subjected to late folding greatly benefits from the integration of surface observations together with geophysical data.  相似文献   

2.
Two-dimensional, elastic, plane-strain, finite element models (FEMs) are generated to study the state of stress and failure induced by a low-angle normal fault, the Alto Tiberina Fault of the Northern Apennines (central Italy): it is beyond the scope of the present work to show that slip can occur on such a fault. The numerical study was performed to evaluate the influences on the local stress field of the litho-mechanical stratification of formations surrounding the fault, and those induced by the geometry of the fault. The performed models have shown the important role played by evaporites and basement formations of the Umbria-Marche succession as seismogenetic layers. The model results have also underlined that the flat-ramp geometry of the fault induces high relative concentration of stresses in correspondence with the low-angle, east-dipping, synthetic normal faults observed today in shallow depth near the Alto Tiberina surface trace. The stress regime predicted by the final model, in which the behavior of the Alto Tiberina together with the antithetic normal fault of Gubbio was simulated, reconciles available geological and geophysical observable to a greater extent. The numerical results can assist interpretation of the tectonic evolution of the region.  相似文献   

3.
This paper examines the neotectonic stress field and faulting in the fold-and-thrust belt of the Nepal Himalaya using the 2D finite element technique, incorporating elastic material behavior under plane strain conditions. Three structural cross-sections (eastern, central and western Nepal), where the Main Himalayan Thrust (MHT) has different geometries, are used for the simulation, because each profile is characterized by different seismicity and neotectonic deformation. A series of numerical models are presented in order to understand the influence of a mid-crustal ramp on the stress field and on neotectonic faulting. Results show that compressive and tensional stress fields are induced to the north and south of the mid-crustal ramp, and consequently normal faults are developed in the thrust sheets moving on the mid-crustal ramp. Since the shear stress accumulation along the northern flat of the MHT is entirely caused by the mid-crustal ramp, this suggests that, as in the past, the MHT will be reactivated in a future large (Mw > 8) earthquake. The simulated fault pattern explains the occurrence of several active faults in the Nepal Himalaya. In all models, the distribution of the horizontal σ1 (maximum principal stress) is consistent with the sequence of thrusting observed in the fold-and-thrust belt of the Himalaya. Failure elements around the flat–ramp–flat coincide with the microseismic events in the area, which are believed to release elastic stress partly during interseismic periods.  相似文献   

4.
In extensional tectonic settings major structural elements such as graben boundary faults are typically oriented subparallel to the maximum horizontal stress component SHmax. They are often structurally accompanied by transfer zones that trend subparallel to the extension direction. In the Upper Rhine Graben, such transfer faults are typically characterized by strike-slip or oblique-slip kinematics. A major re-orientation of the regional stress field by up to 90° of the Upper Rhine Graben in the Early Miocene led to the present-day normal and strike-slip faulting regimes in the North and South of the Upper Rhine Graben, respectively, and a transition zone in-between. Consequently, conditions for fault frictional failure changed significantly. Moreover, it has been observed during tracer and stimulation experiments that such transfer faults may be of major importance for the hydraulic field of geothermal reservoirs under the present stress condition, especially, when located between production and injection well.In this context we have investigated slip and dilation tendencies (TS and TD) of major structural elements at reservoir scale for two representative geothermal sites, Bruchsal (Germany) and Riehen (Switzerland), located close to the Eastern Main Boundary Fault of the Upper Rhine Graben. We have evaluated the quality and uncertainty range of both tendencies with respect to potential variation in SHmax orientation. Despite significant differences in orientation of the structures and the stress regimes, the resulting variation of TS and TD reveal major similarities concerning the reactivation potential of both, the graben-parallel structures and the transfer faults. The conditions of criticality for tensile failure and non-criticality for shear failure suggest that transfer faults are most likely naturally permeable structures with low stimulation potential. This is in agreement with the absence of both immediate tracer recovery and seismicity in the studied geothermal sites.  相似文献   

5.
Deformation within the Earth's lithosphere is largely controlled by the rheology of the rock. Fracture and faulting are characterized by elastic rheologies with brittle mechanisms, while folding and flow are characterized by plastic and/or viscous rheologies due to ductile mechanisms. However, it has been recognized that deformation that resembles ductile behavior can be produced within the confines of the brittle lithosphere. Specific examples are folds that form in the shallow crust, steep hinges at subduction zones that are accompanied by seismicity, and large-scale deformation at plate boundaries. In these cases, the brittle lithosphere behaves elastically with fracture and faulting yet produces ductile behavior. In this paper, we attempt to simulate such ductile behavior in elastic materials using continuum damage mechanics. Engineers utilize damage mechanics to model the continuum deformation of brittle materials. We utilize a modified form of damage mechanics that represents a reduction in frictional strength of preexisting fractures and faults. We use this empirical approach to simulate the bending of the lithosphere under the application of a constant moment.We use numerical simulations to obtain elastostatic solutions for plate bending and where the longitudinal stress at a particular node exceeds a yield stress, we apply damage to reduce Young's modulus at the node. Damage is calculated at each time step by a power-law relationship of the ratio of the yield stress to the longitudinal stress and the yield strain to the longitudinal strain. This results in the relaxation of the material due to increasing damage. To test our method, we apply our damage rheology to an infinite plate deforming under a constant bending moment. We simulate a wide range of behaviors from slow relaxation to instantaneous failure, over timescales that span six orders of magnitude. Using this method, stress relaxation produces elastic-perfectly plastic behavior in cases where failure does not occur. For cases of failure, we observe a rapid increase in damage leading to failure, analogous to the acceleration of microcrack formation and acoustic emissions prior to failure. The changes in the rate of damage accumulation in failure cases are similar to the changes in b-values of acoustic emissions observed in triaxial compression tests of fractured rock and b-value changes prior to some large earthquakes. Thus continuum damage mechanics can simulate the phenomenon of ductile behavior due to brittle mechanisms as well as observations of laboratory experiments and seismicity.  相似文献   

6.
Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).  相似文献   

7.
The South Iceland Seismic Zone (SISZ) was loaded to failure in June 2000, resulting in two M6.6 earthquakes. The SISZ is an E–W‐trending zone with an overall sinistral movement. Numerical models indicate that, when the SISZ is loaded to failure, there are stress concentrations at its ends: tensile in the north‐east and south‐west quadrants, and compressive in the north‐west and south‐east quadrants. These model predictions fit well with observations. Geodetic measurements indicate considerable compression, uplift and associated intense seismicity in recent years in the volcanoes of Hengill and Eyjafjallajokull, located in the quadrants of compression, whereas there have been unusually frequent eruptions in the past decades in the Hekla Volcano, located in one of the quadrants of extension. The models predict that following the large June 2000 earthquakes, stress relaxation within the SISZ should lead to stopping of the intense seismicity and deformation in the volcanoes of Hengill and Eyjafjallajokull, again in agreement with observations. However, when similar episodes of deformation and seismicity start again, particularly in the Hengill Volcano, a large earthquake would be expected within several years in the SISZ. The numerical models, and the deformation and seismic data, indicate that monitoring of ‘soft’ inclusions such as volcanoes (many with magma chambers) in the vicinity of a seismic zone may serve as precursors to large earthquakes.  相似文献   

8.
The Raniganj basin in the Damodar valley of eastern India is located within the riftogenic Gondwana Master-Basin. The fluvio-lacustrine deposits of the Lower Triassic Panchet formation of the Damodar valley in the study area preserve various soft-sediment deformation structures such as slump folds, convolute laminae, flame structures, dish-and-pillar structures, sandstone dykes, pseudonodules and syn-sedimentary faults. Although such soft-sediment deformation structures maybe formed by various processes, in the present area the association of these structures, their relation to the adjacent sedimentary rocks and the tectonic and depositional setting of the formation suggest that these structures are seismogenic. Movements along the basin margin and the intra-basinal faults and resultant seismicity with moderate magnitude (2–5 on Richter scale) are thought to have been responsible for the soft-sediment deformations.  相似文献   

9.
Although the U.K. is in an area of only low to moderate seismicity, the seismic hazard is sufficient to pose a threat to sensitive structures such as chemical plants and nuclear facilities. In quantifying the level of hazard by conventional probabilistic methodology, however, some problems arise in attempting to interpret earthquake data in terms of geological structure and faults. In the U.K., not only is it impossible to identify any demonstrably active faults, but also it is extremely difficult to discern any relationship between the pattern of seismicity and local or regional geological structure.This study discusses the use of two zonation approaches which complement each other in such a way that the general character and trend of seismicity is preserved. In one approach, the zonation is informed by the structural geology, where possible; geological zonation is avoided if it produces sources with heterogeneous seismicity. In the other approach, the record of past earthquakes is divided up into very small zones around individual epicentres or groups of epicentres, the size of each zone usually being proportional to the uncertainty in the epicentral determination of the appropriate event. This zonation preserves an observed tendency of some British earthquakes to repeat themselves. It is suggested that, in intraplate areas such as the U.K., it is often inappropriate to attempt to model individual fault sources. No faults in the U.K. are provably active. Because an earthquake of moderate size can occur on a very short fault segment, it is impractical to restrict fault modelling to major features. Even the two largest U.K. faults, suspected to be active, pose problems in attributing historical seismicity to them as distinct features.  相似文献   

10.
Stability and deformation of rock masses around tunnels in underground mines play significant roles on the safety and efficient exploitation of the ore body. Therefore, understanding of geomechanical behavior around underground excavations is important and necessary. In this study, a three-dimensional numerical model was built and stress analyses were performed by using 3DEC software for an underground mine in USA using the available information on stratigraphy, geological structures and mechanical properties of rock masses and discontinuities. Investigations were conducted to study the effect of the lateral stress ratio (K0), material constitutive models, boundary conditions and rock support system on the stability of rock masses around the tunnels. Results of the stress, displacement, failure zone, accumulated plastic shear strain and post-failure cohesion distributions were obtained for these cases. Finally, comparisons of the deformation were made between the field deformation measurements and numerical simulations.  相似文献   

11.
Although the Southwest Seismic Zone (SWSZ), located about 150 km to the east of Perth in southwestern Australia, is one of the most seismically active areas in Australia, there is little understanding as to why the earthquakes are occurring.An analysis of geophysical, geological and geodetic data from the area suggests that the SWSZ coincides with a Precambrian terrane boundary. Seismic data show that the terrane boundary zone dips at a shallow angle in a northeasterly direction. Reactivation of this ‘zone of weakness’ in the contemporary stress field (east–west maximum horizontal stress) is interpreted to be the first-order control on seismicity in the region.Gravity data show that the terrane boundary is offset by near-orthogonal structures, which are interpreted as faults. At least one of these trends corresponds with a linear zone of epicentres. The temporal and spatial distributions of epicentres associated with the 1968 Meckering earthquake (ML 6.9) suggest that the second-order distribution of seismicity in the SWSZ can be explained by the ‘intersection model’, whereby stresses are amplified by space problems associated with displacements on crosscutting faults.It is speculated that a zone of high density and high seismic velocity in the lower crust may also be a second-order control on the local seismicity. However, confirmation awaits better delineation of the extent of this zone.  相似文献   

12.
Strong earthquakes and faults have significant effect on the stability capability of underground tunnel structures. This study used a 3-Dimensional Discrete Element model and the real records of ground motion in the Wenchuan earthquake to investigate the dynamic response of tunnel-fault system. The typical tunnel-fault system was composed of one planned railway tunnel and one seismically active fault. The discrete numerical model was prudentially calibrated by means of the comparison between the field survey and numerical results of ground motion. It was then used to examine the detailed quantitative information on the dynamic response characteristics of tunnel-fault system, including stress distribution, strain, vibration velocity and tunnel failure process. The intensive tunnel-fault interaction during seismic loading induces the dramatic stress redistribution and stress concentration in the intersection of tunnel and fault. The tunnel-fault system behavior is characterized by the complicated nonlinear dynamic failure process in response to a real strong seismic event. It can be qualitatively divided into 5 main stages in terms of its stress, strain and rupturing behaviors: (1) strain localization, (2) rupture initiation, (3) rupture acceleration, (4) spontaneous rupture growth and (5) stabilization. This study provides the insight into the further stability estimation of underground tunnel structures under the combined effect of strong earthquakes and faults.  相似文献   

13.
Summary The 3000 Orebody is one of two orebodies in the Deep Copper Mine at Mount Isa, Australia. Owing to concerns about potential shaft pillar instabilities, an integrated seismic system was introduced to monitor seismic activity associated with pillar and country rock deformation. Coupled with numerical modelling of the stress regime, the system may assist in the characterization of rock mass damage resulting from mining, and perhaps the identification of near- and far-field geological structures that affect stope performance. A study was undertaken to quantify the seismicity and to determine potential applications of the seismic technology. The relation between geological structure and seismicity is strong, suggesting good prospects for the use of the system in the ground-control activities noted above. The induction of seismicity, which involves small magnitude events, is associated with reduction of normal stress on planes of weakness, suggesting that stress path may be an important factor in the level of seismicity observed in hard rock mines.  相似文献   

14.
The Neogene stratigraphic series is characterized by predominant clayey facies alternated by other sand layers. The outcrop and subsurface studies show varied and complex styles of deformations and lead to relate the structures to paleoseismic events. The seismicity of eastern onshore and offshore Tunisian margin follows the master fault corridors oriented globally N–S, E–W, and NW–SE that correspond to the bordering faults of grabens and syncline corridors and associated faulted drag fold structures oriented NE–SW. Epicenters of magnitudes between 3 and 5 are located along these border fault corridors. The Neogene strata record brittle structures, including numerous and deep faults and fractures with straight and high-angle dipping planes. The structuring of NE–SW en echelon folds and synclines inside and outside NW–SE and E–W right lateral and N–S and NE–SW left lateral tectonic corridors indicates the strike-slip type of bordering faults and their seismogenic nature. Wrench fault movements that induce mud and salt diapirs, mud volcanoes, and intrusive ascensions are related to seismic shocks. Seismic waves caused by activity along one, or most likely, several tectonic structures would have propagated throughout the Quaternary cover producing seismites. The similarity of deposits, structuring, and seismites between the Tunis-Bizerte to the North and Hammamet-Mahdia to the South accredits the hypothesis that the seismic episodes might have affected sedimentation patterns along the Sahalian large geographic area. The paleoseismic events in northeastern Tunisia might be related to tectonic fault reactivations through time. This hypothesis is consistent with the geomorphologic context of the study area, characterized by several morphostructural lineaments with strong control on the sediment distribution, as well as uplifted and subsiding terrains. The estimated magnitude of the seismic events and the great regional tectonically affected areas demonstrate that the northeastern Tunisia experienced stress through the last geological episodes of its evolution. This Neogene kinematic reconstruction highlights the neotectonic system inducing the actual seismicity on this margin. Therefore, there is a straight relationship between deepseated faults and seismicity.  相似文献   

15.
Active faults play the key role in the formation of the morphological structures and control the seismicity in the Olekma-Stanovoi seismic zone. The detailed geological-structural and morphotectonic studies of fault zones made it possible to estimate the kinematics of the active faults and their activity degree in the Holocene (the last 10 000 years). The latter include old faults such as, for example, the Stanovoi Suture of the Proterozoic age. Most of these faults are the Late Mesozoic and Cenozoic in age. The studies were aimed at reconstructing the past seismogeological processes and were accompanied by trenching across morphological structures that are presumably associated with zones of active tectonic fractures preliminarily studied by geophysical methods. The applied approach allowed us to substantially specify the available information on the seismotectonics and the potential seismic hazard in the region.  相似文献   

16.
Pliocene and Quaternary tectonic structures mainly consisting of segmented northwest–southeast normal faults, and associated seismicity in the central Betics do not agree with the transpressive tectonic nature of the Africa–Eurasia plate boundary in the Ibero-Maghrebian region. Active extensional deformation here is heterogeneous, individual segmented normal faults being linked by relay ramps and transfer faults, including oblique-slip and both dextral and sinistral strike-slip faults. Normal faults extend the hanging wall of an extensional detachment that is the active segment of a complex system of successive WSW-directed extensional detachments which have thinned the Betic upper crust since middle Miocene. Two areas, which are connected by an active 40-km long dextral strike-slip transfer fault zone, concentrate present-day extension. Both the seismicity distribution and focal mechanisms agree with the position and regime of the observed faults. The activity of the transfer zone during middle Miocene to present implies a mode of extension which must have remained substantially the same over the entire period. Thus, the mechanisms driving extension should still be operating. Both the westward migration of the extensional loci and the high asymmetry of the extensional systems can be related to edge delamination below the south Iberian margin coupled with roll-back under the Alborán Sea; involving the asymmetric westward inflow of asthenospheric material under the margins.  相似文献   

17.
Some geological structures have simple geometrical forms and can be analysed using deterministic equations. Examples include alluvial fans and many sedimentary basins. But most geological structures are complex and appear to defy mathematical analyses. Yet in the complexity there is an order. Complex geological structures generally obey fractal statistics. Examples include topography, distributions of earthquakes and faults, and mineral deposits. An unresolved question is whether the fractal order is simply the result of scale invariance or the result of governing equations that yield deterministic chaos. In order to try to answer this question a variety of slider-block models have been considered. The stick-slip behaviour of slider-block models is a simple analogy to earthquakes. A pair of slider-blocks has been shown to behave chaotically. Models that use many slider-blocks exhibit self-organized criticality and generate fractal statistics similar to the statistics of regional seismicity.  相似文献   

18.
We have analysed the earthquake sequence occurred at Campi Flegrei during an unrest episode of strong ground uplift and seismicity, occurred in the period 1982–1984. The maximum magnitude of these events was about 4. Both earthquake occurrence and ground deformation have been interpreted in terms of the role played by a ring fault system, inward dipping, related to phenomena of caldera collapse and resurgence. Earthquakes are of mixed strike-slip and normal fault type. They show a dip movement opposite to the static ground deformation. The rising of the internal block with respect to the zone external to the ring fault, as observed by ground deformation, should cause thrust fault slip on the fracture system, whereas a normal fault dip component is observed. The simulation of the stress field generated by overpressure in a magma chamber in presence of lateral discontinuities, as performed by a boundary element method, allows to hypothesise that reverse fault slip on the ring fault is mainly aseismic, and such aseismic movement is able to focus normal fault shear stress along the lateral discontinuities. Aseismic slip on the ring fault in response to static deformation is also supported by the low amount of seismic moment released (M0 ≅ 1015 Nm), about two orders of magnitude lower than expected from the shear slip on the discontinuities needed to accomplish the total static surface deformation (1.8 m). Such results have been compared with observations at Rabaul caldera, during a similar unrest episode. In such area, the seismic moment release is in good agreement with shear slip produced on a system of outward dipping ring faults, and seismicity is much more focused on the fault structures. The comparison between the two areas shed new light about the dynamics of earthquakes in calderas, as due to the role of bordering ring fault systems.  相似文献   

19.
Derinkuyu Underground City, located in the Cappadocia Region of Turkey, is an important structure not only for its antique and archaeological characteristics, but also as a structure in terms of the long-term stability of underground rock structures excavated by mankind. The authors carried out some observational, experimental and theoretical rock mechanics studies in the region from 1996 in the context of a research project supported by the Ministry of Education, Culture, Sports, Science and Technology of Japan for the assessment of the long-term behaviour of Derinkuyu Underground City, and these studies are still continuing. In addition to the monitoring of the environmental conditions such as temperature, moisture and air pressure, they also installed acoustic emission (AE) and electrical potential (EP) measurement systems to monitor the behaviour and response of the surrounding rock at the fifth and seventh floors of the underground city. In this article, the geology, seismicity and state of stress of the Cappadocia Region, climatic conditions in the underground city and its vicinity, short- and long-term behaviours of the surrounding rock, its index and mechanical properties, and effects of water content and freezing–thawing processes were investigated. The stability of Derinkuyu Underground City was also evaluated using theoretical and numerical methods, and the results were presented. Furthermore, its implications in modern geoengineering are also discussed.  相似文献   

20.
Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号