首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 393 毫秒
1.
Most aqueous sedimentary environments contain varying concentrations of fine‐grained, often clay‐rich, sediment that is transported in suspension and may modify the properties of the flow and underlying mobile bed. This paper presents results from a series of laboratory experiments examining the mean and turbulent properties of clay‐laden (kaolinite) flows, of various volumetric sediment concentrations between 0·046% and 12·7%, moving over a fixed, idealized current ripple. As the kaolinite concentration was raised, with flow velocity and depth constant, four flow types were observed to occur: (i) turbulent flow, in which flow separation is dominant in the leeside of the ripple; (ii) turbulence‐enhanced transitional flow, in which turbulence in the leeside separation zone region is enhanced; (iii) turbulence‐attenuated transitional flow, in which turbulence along the separation zone shear layer and in the free flow above it becomes damped, eventually leading to a reduction in the size of the separation zone wake region; and (iv) laminar plug flow, in which turbulence is damped and flow is almost stagnant in the lee of the ripple. Such modulation of turbulence by increasing clay concentrations suggests that many paradigms of flow and bedform dynamics, which have been based on extensive past work in clear water flows, require revision. The present results highlight a need to fully characterize the boundary conditions for turbulence modulation as a function of clay type and applied flow conditions, and the effects of such flows on fully mobile cohesionless beds.  相似文献   

2.
Sedimentary facies in the distal parts of deep‐marine lobes can diverge significantly from those predicted by classical turbidite models, and sedimentological processes in these environments are poorly understood. This gap may be bridged using outcrop studies and theoretical models. In the Skoorsteenberg Formation (South Africa), a downstream transition from thickly bedded turbidite sandstones to argillaceous, internally layered hybrid beds, is observed. The hybrid beds have a characteristic stratigraphic and spatial distribution, being associated with bed successions which generally coarsen and thicken‐upward reflecting deposition on the fringes of lobes in a dominantly progradational system. Using a detailed characterization of bed types, including grain size, grain‐fabric and mineralogical analyses, a process‐model for flow evolution is developed. This is explored using a numerical suspension capacity model for radially spreading and decelerating turbidity currents. The new model shows how decelerating sediment suspensions can reach a critical suspension capacity threshold beyond which grains are not supported by fluid turbulence. Sand and silt particles, settling together with flocculated clay, may form low yield strength cohesive flows; development of these higher concentration lower boundary layer flows inhibits transfer of turbulent kinetic energy into the upper parts of the flow ultimately resulting in catastrophic loss of turbulence and collapse of the upper part of the flow. Advection distances of the now transitional to laminar flow are relatively long (several kilometres) suggesting relatively slow dewatering (several hours) of the low yield strength flows. The catastrophic loss of turbulence accounts for the presence of such beds in other fine‐grained systems without invoking external controls or large‐scale flow partitioning and also explains the abrupt pinch‐out of all divisions of these sandstones. Estimation of the point of flow transformation is a useful tool in the prediction of heterogeneity distribution in subsurface systems.  相似文献   

3.
Hybrid event beds comprising clay‐poor and clay‐rich sandstone are abundant in Maastrichtian‐aged sandstones of the Springar Formation in the north‐west Vøring Basin, Norwegian Sea. This study focuses on an interval, informally referred to as the Lower Sandstone, which has been penetrated in five wells that are distributed along a 140 km downstream transect. Systematic variations in bed style within this stratigraphic interval are used to infer variation in flow behaviour in relatively proximal and distal settings, although individual beds were not correlated. The Lower Sandstone shows an overall reduction in total thickness, bed amalgamation, sand to mud ratio and grain size in distal wells. Turbidites dominated by clay‐poor sandstone are at their most common in relatively proximal wells, whereas hybrid event beds are at their most common in distal wells. Hybrid event beds typically comprise a basal clay‐poor sandstone (non‐stratified or stratified) overlain by banded sandstone, with clay‐rich non‐stratified sandstone at the bed top. The dominant type of clay‐poor sandstone at the base of these beds varies spatially; non‐stratified sandstone is thickest and most common proximally, whereas stratified sandstone becomes dominant in distal wells. Stratified and banded sandstone record progressive deposition of the hybrid event bed. Thus, the facies succession within hybrid event beds records the longitudinal heterogeneity of flow behaviour within the depositional boundary layer; this layer changed from non‐cohesive at the front, through a region of transitional behaviour (fluctuating non‐cohesive and cohesive flow), to cohesive behaviour at the rear. Spatial variation in the dominant type of clay‐poor sandstone at the bed base suggests that the front of the flow remained non‐cohesive, and evolved from high‐concentration and turbulence‐suppressed to increasingly turbulent flow; this is thought to occur in response to deposition and declining sediment fallout. This research may be applicable to other hybrid event bed prone systems, and emphasizes the dynamic nature of hybrid flows.  相似文献   

4.
The complexity of flow and wide variety of depositional processes operating in subaqueous density flows, combined with post‐depositional consolidation and soft‐sediment deformation, often make it difficult to interpret the characteristics of the original flow from the sedimentary record. This has led to considerable confusion of nomenclature in the literature. This paper attempts to clarify this situation by presenting a simple classification of sedimentary density flows, based on physical flow properties and grain‐support mechanisms, and briefly discusses the likely characteristics of the deposited sediments. Cohesive flows are commonly referred to as debris flows and mud flows and defined on the basis of sediment characteristics. The boundary between cohesive and non‐cohesive density flows (frictional flows) is poorly constrained, but dimensionless numbers may be of use to define flow thresholds. Frictional flows include a continuous series from sediment slides to turbidity currents. Subdivision of these flows is made on the basis of the dominant particle‐support mechanisms, which include matrix strength (in cohesive flows), buoyancy, pore pressure, grain‐to‐grain interaction (causing dispersive pressure), Reynolds stresses (turbulence) and bed support (particles moved on the stationary bed). The dominant particle‐support mechanism depends upon flow conditions, particle concentration, grain‐size distribution and particle type. In hyperconcentrated density flows, very high sediment concentrations (>25 volume%) make particle interactions of major importance. The difference between hyperconcentrated density flows and cohesive flows is that the former are friction dominated. With decreasing sediment concentration, vertical particle sorting can result from differential settling, and flows in which this can occur are termed concentrated density flows. The boundary between hyperconcentrated and concentrated density flows is defined by a change in particle behaviour, such that denser or larger grains are no longer fully supported by grain interaction, thus allowing coarse‐grain tail (or dense‐grain tail) normal grading. The concentration at which this change occurs depends on particle size, sorting, composition and relative density, so that a single threshold concentration cannot be defined. Concentrated density flows may be highly erosive and subsequently deposit complete or incomplete Lowe and Bouma sequences. Conversely, hydroplaning at the base of debris flows, and possibly also in some hyperconcentrated flows, may reduce the fluid drag, thus allowing high flow velocities while preventing large‐scale erosion. Flows with concentrations <9% by volume are true turbidity flows (sensu 4 ), in which fluid turbulence is the main particle‐support mechanism. Turbidity flows and concentrated density flows can be subdivided on the basis of flow duration into instantaneous surges, longer duration surge‐like flows and quasi‐steady currents. Flow duration is shown to control the nature of the resulting deposits. Surge‐like turbidity currents tend to produce classical Bouma sequences, whose nature at any one site depends on factors such as flow size, sediment type and proximity to source. In contrast, quasi‐steady turbidity currents, generated by hyperpycnal river effluent, can deposit coarsening‐up units capped by fining‐up units (because of waxing and waning conditions respectively) and may also include thick units of uniform character (resulting from prolonged periods of near‐steady conditions). Any flow type may progressively change character along the transport path, with transformation primarily resulting from reductions in sediment concentration through progressive entrainment of surrounding fluid and/or sediment deposition. The rate of fluid entrainment, and consequently flow transformation, is dependent on factors including slope gradient, lateral confinement, bed roughness, flow thickness and water depth. Flows with high and low sediment concentrations may co‐exist in one transport event because of downflow transformations, flow stratification or shear layer development of the mixing interface with the overlying water (mixing cloud formation). Deposits of an individual flow event at one site may therefore form from a succession of different flow types, and this introduces considerable complexity into classifying the flow event or component flow types from the deposits.  相似文献   

5.
The Lower Cretaceous Britannia Formation (North Sea) includes an assemblage of sandstone beds interpreted here to be the deposits of turbidity currents, debris flows and a spectrum of intermediate flow types termed slurry flows. The term ‘slurry flow’ is used here to refer to watery flows transitional between turbidity currents, in which particles are supported primarily by flow turbulence, and debris flows, in which particles are supported by flow strength. Thick, clean, dish‐structured sandstones and associated thin‐bedded sandstones showing Bouma Tb–e divisions were deposited by high‐ and low‐density turbidity currents respectively. Debris flow deposits are marked by deformed, intraformational mudstone and sandstone masses suspended within a sand‐rich mudstone matrix. Most Britannia slurry‐flow deposits contain 10–35% detrital mud matrix and are grain supported. Individual beds vary in thickness from a few centimetres to over 30 m. Seven sedimentary structure division types are recognized in slurry‐flow beds: (M1) current structured and massive divisions; (M2) banded units; (M3) wispy laminated sandstone; (M4) dish‐structured divisions; (M5) fine‐grained, microbanded to flat‐laminated units; (M6) foundered and mixed layers that were originally laminated to microbanded; and (M7) vertically water‐escape structured divisions. Water‐escape structures are abundant in slurry‐flow deposits, including a variety of vertical to subvertical pipe‐ and sheet‐like fluid‐escape conduits, dish structures and load structures. Structuring of Britannia slurry‐flow beds suggests that most flows began deposition as turbidity currents: fully turbulent flows characterized by turbulent grain suspension and, commonly, bed‐load transport and deposition (M1). Mud was apparently transported largely as hydrodynamically silt‐ to sand‐sized grains. As the flows waned, both mud and mineral grains settled, increasing near‐bed grain concentration and flow density. Low‐density mud grains settling into the denser near‐bed layers were trapped because of their reduced settling velocities, whereas denser quartz and feldspar continued settling to the bed. The result of this kinetic sieving was an increasing mud content and particle concentration in the near‐bed layers. Disaggregation of mud grains in the near‐bed zone as a result of intense shear and abrasion against rigid mineral grains caused a rapid increase in effective clay surface area and, hence, near‐bed cohesion, shear resistance and viscosity. Eventually, turbulence was suppressed in a layer immediately adjacent to the bed, which was transformed into a cohesion‐dominated viscous sublayer. The banding and lamination in M2 are thought to reflect the formation, evolution and deposition of such cohesion‐dominated sublayers. More rapid fallout from suspension in less muddy flows resulted in the development of thin, short‐lived viscous sublayers to form wispy laminated divisions (M3) and, in the least muddy flows with the highest suspended‐load fallout rates, direct suspension sedimentation formed dish‐structured M4 divisions. Markov chain analysis indicates that these divisions are stacked to form a range of bed types: (I) dish‐structured beds; (II) dish‐structured and wispy laminated beds; (III) banded, wispy laminated and/or dish‐structured beds; (IV) predominantly banded beds; and (V) thickly banded and mixed slurried beds. These different bed types form mainly in response to the varying mud contents of the depositing flows and the influence of mud on suspended‐load fallout rates. The Britannia sandstones provide a remarkable and perhaps unique window on the mechanics of sediment‐gravity flows transitional between turbidity currents and debris flows and the textures and structuring of their deposits.  相似文献   

6.
《Sedimentology》2018,65(3):952-992
Hybrid event beds comprising both clean and mud‐rich sandstone are important components of many deep‐water systems and reflect the passage of turbulent sediment gravity flows with zones of clay‐damped or suppressed turbulence. ‘Behind‐outcrop’ cores from the Pennsylvanian deep‐water Ross Sandstone Formation reveal hybrid event beds with a wide range of expression in terms of relative abundance, character and inferred origin. Muddy hybrid event beds first appear in the underlying Clare Shale Formation where they are interpreted as the distal run‐out of the wakes to flows which deposited most of their sand up‐dip before transforming to fluid mud. These are overlain by unusually thick (up to 4·4 m), coarse sandy hybrid event beds (89% of the lowermost Ross Formation by thickness) that record deposition from outsized flows in which transformations were driven by both substrate entrainment in the body of the flow and clay fractionation in the wake. A switch to dominantly fine‐grained sand was accompanied initially by the arrest of turbulence‐damped, mud‐rich flows with evidence for transitional flow conditions and thick fluid mud caps. The mid and upper Ross Formation contain metre‐scale bed sets of hybrid event beds (21 to 14%, respectively) in (i) upward‐sandying bed set associations immediately beneath amalgamated sheet or channel elements; (ii) stacked thick‐bedded and thin‐bedded hybrid event bed‐dominated bed sets; (iii) associations of hybrid event bed‐dominated bed sets alternating with conventional turbidites; and (iv) rare outsized hybrid event beds. Hybrid event bed dominance in the lower Ross Formation may reflect significant initial disequilibrium, a bias towards large‐volume flows in distal sectors of the basin, extensive mud‐draped slopes and greater drop heights promoting erosion. Higher in the formation, hybrid event beds record local perturbations related to channel switching, lobe relocations and extension of channels across the fan surface. The Ross Sandstone Formation confirms that hybrid event beds can form in a variety of ways, even in the same system, and that different flow transformation mechanisms may operate even during the passage of a single flow.  相似文献   

7.
JAMIE G. QUIN 《Sedimentology》2011,58(6):1414-1433
Although normal isotropic hummocky cross‐stratification is commonly interpreted to be the deposit of large‐scale ripples, there are many reasons why this may not usually be the case. These reasons include: (i) that the stratification produced by large‐scale ripples does not particularly look like isotropic hummocky cross‐stratification; (ii) that it is difficult reconciling the abundance of HCS with the restricted hydraulic stability of large‐scale ripples in silt to fine sand (i.e. the grain sizes in which hummocky cross‐stratification is usually found); (iii) that the distribution of hummocky cross‐stratification within ancient storm beds is not the distribution that would be expected from large‐scale ripples; (iv) that the flows calculated to have formed ancient examples of hummocky cross‐stratification would be expected to generate an upper stage plane bed rather than ripples; and (v) that it is difficult to explain why large‐scale ripples would predominate in the proximal parts of storm beds when modern storm flows commonly exceed the threshold for entrainment. In contrast to the various hypotheses which propose that isotropic hummocky cross‐stratification is generated by ripples, an alternative hypothesis which suggests that it is generated by instabilities, does seem to adequately explain the origin of hummocky cross‐stratification. However, it is difficult to accept this hypothesis given that the origin of the proposed instabilities is unproven. These conclusions highlight the continued uncertainty regarding the process, which generates hummocky cross‐stratification.  相似文献   

8.
Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focused on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced thin beds. Depositional processes and sources for three of those eleven clusters are studied at three coring sites. Bathymetrical data and seismic reflection profiles are used to understand the specific geomorphology of each site. X‐ray, thin sections and CT scan imagery combined with grain‐size, geochemical and mineralogical measurements on the cores allow characterization of the turbidites. Turbidites included in each cluster were produced by remobilization of surficial slope sediment, a process identified in very few studies worldwide. Three types of turbidites are distinguished and compared with deposits obtained in flume studies published in the literature. Type 1 is made of an ungraded clayey silt layer issued from a cohesive flow. Type 2 is composed of a partially graded clayey sand layer overlain by a mud cap, attributed to a transitional flow. Type 3 corresponds to a graded clayey sand layer overlain by a mud cap issued from a turbulence‐dominated flow. While the published experimental studies show that turbulence is damped by cohesion for low clay content, type 3 deposits of this study show evidence for a turbulence‐dominated mechanism despite their high clay content. This divergence may in part relate to input variables, such as water chemistry and clay mineralogy, that are not routinely considered in experimental studies. Furthermore, the large sedimentological variety observed in the turbidites from one coring site to another is related to the evolution of a sediment flow within a field‐scale basin made of a complex physiography that cannot be tackled by flume experiments.  相似文献   

9.
The interaction of flow with an erodible bed in alluvial rivers and deep‐sea channels gives rise to a wide range of self‐formed morphologies, including channels, ripples, dunes, antidunes, alternate bars, multiple‐row bars, meandering and braiding. As the flow is invariably turbulent in field manifestations of these morphologies, there has been a tendency to assume that turbulence is necessary for them to form. While turbulence undoubtedly has an important influence when it is present, it is not necessary for any of these features. Indeed, all of these features can be formed by the morphodynamic interaction of purely laminar or nearly laminar flow with an erodible bed. This paper provides a survey and synthesis of a wide range of laminar or near‐laminar flow analogues of morphologies observed in the field. Laminar‐flow analogues of turbulent‐flow morphologies cannot and should not be expected to satisfy dynamic similarity in terms of all relevant dimensionless parameters. What is of more significance is the convergence of the underlying physics. It is illustrated in this paper that many existing theoretical frameworks for the explanation of turbulent‐flow morphodynamics require only relatively minor modification in order to adapt them to laminar flows.  相似文献   

10.
The Eocene flysch of Middle Dalmatia comprises several beds that are interpreted to have been deposited from reflected sediment gravity flows. Their compositions are similar and two bed types are differentiated: complex beds that are debrite-plus-turbidite couplets, and turbidites. The sequence alternations in the turbidite part of the bed, opposing ripples within the same bed, and opposite flow directions indicated by flutes and ripples are indicative of flow reflections. The influence of seiches is suggested by the occurrence of symmetrical (oscillation) ripples. The palaeotransport directions of reflected flows show wide dispersal. A geometry of small, fault-controlled sub-basins with centripetal palaeotransport patterns is proposed.  相似文献   

11.
Subaqueous sediment density flows: Depositional processes and deposit types   总被引：7，自引：0，他引：7  
Submarine sediment density flows are one of the most important processes for moving sediment across our planet, yet they are extremely difficult to monitor directly. The speed of long run‐out submarine density flows has been measured directly in just five locations worldwide and their sediment concentration has never been measured directly. The only record of most density flows is their sediment deposit. This article summarizes the processes by which density flows deposit sediment and proposes a new single classification for the resulting types of deposit. Colloidal properties of fine cohesive mud ensure that mud deposition is complex, and large volumes of mud can sometimes pond or drain‐back for long distances into basinal lows. Deposition of ungraded mud (TE‐3) most probably finally results from en masse consolidation in relatively thin and dense flows, although initial size sorting of mud indicates earlier stages of dilute and expanded flow. Graded mud (TE‐2) and finely laminated mud (TE‐1) most probably result from floc settling at lower mud concentrations. Grain‐size breaks beneath mud intervals are commonplace, and record bypass of intermediate grain sizes due to colloidal mud behaviour. Planar‐laminated (TD) and ripple cross‐laminated (TC) non‐cohesive silt or fine sand is deposited by dilute flow, and the external deposit shape is consistent with previous models of spatial decelerating (dissipative) dilute flow. A grain‐size break beneath the ripple cross‐laminated (TC) interval is common, and records a period of sediment reworking (sometimes into dunes) or bypass. Finely planar‐laminated sand can be deposited by low‐amplitude bed waves in dilute flow (TB‐1), but it is most likely to be deposited mainly by high‐concentration near‐bed layers beneath high‐density flows (TB‐2). More widely spaced planar lamination (TB‐3) occurs beneath massive clean sand (TA), and is also formed by high‐density turbidity currents. High‐density turbidite deposits (TA, TB‐2 and TB‐3) have a tabular shape consistent with hindered settling, and are typically overlain by a more extensive drape of low‐density turbidite (TD and TC,). This core and drape shape suggests that events sometimes comprise two distinct flow components. Massive clean sand is less commonly deposited en masse by liquefied debris flow (DCS), in which case the clean sand is ungraded or has a patchy grain‐size texture. Clean‐sand debrites can extend for several tens of kilometres before pinching out abruptly. Up‐current transitions suggest that clean‐sand debris flows sometimes form via transformation from high‐density turbidity currents. Cohesive debris flows can deposit three types of ungraded muddy sand that may contain clasts. Thick cohesive debrites tend to occur in more proximal settings and extend from an initial slope failure. Thinner and highly mobile low‐strength cohesive debris flows produce extensive deposits restricted to distal areas. These low‐strength debris flows may contain clasts and travel long distances (DM‐2), or result from more local flow transformation due to turbulence damping by cohesive mud (DM‐1). Mapping of individual flow deposits (beds) emphasizes how a single event can contain several flow types, with transformations between flow types. Flow transformation may be from dilute to dense flow, as well as from dense to dilute flow. Flow state, deposit type and flow transformation are strongly dependent on the volume fraction of cohesive fine mud within a flow. Recent field observations show significant deviations from previous widely cited models, and many hypotheses linking flow type to deposit type are poorly tested. There is much still to learn about these remarkable flows.  相似文献   

12.
A. Guy Plint 《Sedimentology》2014,61(3):609-647
Determining sediment transport direction in ancient mudrocks is difficult. In order to determine both process and direction of mud transport, a portion of a well‐mapped Cretaceous delta system was studied. Oriented samples from outcrop represent prodelta environments from ca 10 to 120 km offshore. Oriented thin sections of mudstone, cut in three planes, allowed bed microstructure and palaeoflow directions to be determined. Clay mineral platelets are packaged in equant, face‐face aggregates 2 to 5 μm in diameter that have a random orientation; these aggregates may have formed through flocculation in fluid mud. Cohesive mud was eroded by storms to make intraclastic aggregates 5 to 20 μm in diameter. Mudstone beds are millimetre‐scale, and four microfacies are recognized: Well‐sorted siltstone forms millimetre‐scale combined‐flow ripples overlying scoured surfaces; deposition was from turbulent combined flow. Silt‐streaked claystone comprises parallel, sub‐millimetre laminae of siliceous silt and clay aggregates sorted by shear in the boundary layer beneath a wave‐supported gravity flow of fluid mud. Silty claystone comprises fine siliceous silt grains floating in a matrix of clay and was deposited by vertical settling as fluid mud gelled under minimal current shear. Homogeneous clay‐rich mudstone has little silt and may represent late‐stage settling of fluid mud, or settling from wave‐dissipated fluid mud. It is difficult or impossible to correlate millimetre‐scale beds between thin sections from the same sample, spaced only ca 20 mm apart, due to lateral facies change and localized scour and fill. Combined‐flow ripples in siltstone show strong preferred migration directly down the regional prodelta slope, estimated at ca 1 : 1000. Ripple migration was effected by drag exerted by an overlying layer of downslope‐flowing, wave‐supported fluid mud. In the upper part of the studied section, centimetre‐scale interbeds of very fine to fine‐grained sandstone show wave ripple crests trending shore normal, whereas combined‐flow ripples migrated obliquely alongshore and offshore. Storm winds blowing from the north‐east drove shore‐oblique geostrophic sand transport whereas simultaneously, wave‐supported flows of fluid mud travelled downslope under the influence of gravity. Effective wave base for sand, estimated at ca 40 m, intersected the prodelta surface ca 80 km offshore whereas wave base for mud was at ca 70 m and lay ca 120 km offshore. Small‐scale bioturbation of mud beds co‐occurs with interbedded sandstone but stratigraphically lower, sand‐free mudstone has few or no signs of benthic fauna. It is likely that a combination of soupground substrate, frequent storm emplacement of fluid mud, low nutrient availability and possibly reduced bottom‐water oxygen content collectively inhibited benthic fauna in the distal prodelta.  相似文献   

13.
为解析波流边界层内泥沙运动,建立了基于水动力-泥沙-床面互馈过程的波流边界层1DV泥沙数学模型,可用于模拟不同床面形态下粉沙-沙的含沙量过程。床面形态模块提供床面形态类型和相应参数;给出了平底和沙波床面粗糙高度和泥沙扩散系数的确定方法;采用了适宜粉沙及沙的制约沉速、底部参考浓度和起动剪切应力等公式;引入含沙量层化效应和制约沉降反映水动力与泥沙之间的相互影响。水槽试验资料验证表明,建立的模型较好地模拟了不同床面不同波流组合条件下的含沙量剖面。在此基础上,讨论了不同床面含沙量剖面模拟方法的差异,指出床面形态是决定含沙量变化的重要因素之一,仅通过改变床面粗糙高度不足以反映漩涡沙波床面的含沙量剖面特征。该模型可为研究波流边界层内泥沙运动和物质输运提供工具。  相似文献   

14.
Distinct, clay‐rich beds are common in fjord‐marine deposits in Trondheimsfjorden near the outlet of the Nidelva River. Their characteristic light‐grey colour makes the beds easily distinguishable from the surrounding brownish, bioturbated, muddy fjord sediments. The clay‐rich beds commonly display a clear stratification in clay, silt and very fine sand. The beds are interpreted as originating primarily from large quick‐clay landslides upstream along the Nidelva River. Such events resulted in a sudden increase in the supply of fines to the fjord from disintegrating landslide debris and heavily loaded effluent plumes, possibly favouring hyperpycnal flow. Typical beds can be divided into a clay‐rich lower section, reflecting an initial surge with high concentrations of suspended mud, and a sandier upper section reflecting pulses of higher energy. This development can be explained, for example, by a lowering in the supply of mud, an increasing activity of deltaic sediment gravity flows due to a higher availability of sandy sediments in the landslide‐affected river, and by flooding and/or breaching of landslide dams. The typical, stratified beds are interpreted as the result of one quick‐clay landslide, whereas exceptionally thick, less organized, stratified beds are possibly the result of several large and/or complex landslides. Radiocarbon dating of mollusc shells has helped to establish a chronology for major terrestrial landslides in the area. The frequency of landslides increases towards the end of the Holocene. This is explained by a progressively deeper incision of rivers during glacioisostatic rebound, possibly combined with a change to a wetter climate. The marine core record displays deformation structures and hiati representing submarine mass‐wasting events, and supports the evidence that the clay‐rich beds are weak layers in the fjord‐marine stratigraphy. The inherent weakness of these layers may be explained by their composition, immature texture, loose fabric and contrasting permeabilities in the deposits. Slide‐prone layers similar to the clay‐rich beds described here may be found in other comparable fjord‐marginal settings and are considered to be of importance for geohazard assessments.  相似文献   

15.
  相似文献   

16.
Suspended sediment dynamics and morphodynamics in the Yellow River, China   总被引：2，自引：0，他引：2  
The Yellow River in China carries large amounts of sediments in suspension at concentrations up to several hundreds of kilograms per cubic metre; the sediment is composed mainly of silt. These high sediment concentrations influence the hydrodynamics (flow velocity and turbulence) which, in turn, determine the sediment concentration profile, whereas both the high sediment concentrations and pseudo-cohesive properties of silt determine the morphodynamics of the Yellow River. The effect of sediment on the hydrodynamics is analysed using the Richardson number and the Reynolds number to provide a framework to differentiate between various flow regimes in the Yellow River, which is calibrated and validated with Yellow River data. The flow may be sub-saturated (stable flow), super-saturated (unstable flow characterized by high deposition rates, caused by collapse of turbulence), or hyperconcentrated sub-saturated (stable flow because of hindered settling effects), depending on the Richardson number. Independent of this, the flow may be turbulent, transitional or laminar, depending on the Reynolds number. Analysis of these flow types improves understanding of the flow regimes and morphodynamics of the Yellow River. The morphodynamics of the Yellow River are also affected by pseudo-cohesive behaviour caused by shear dilatance, which results in increasing critical shear stress for erosion at decreasing grain-size. This pseudo-cohesive behaviour may be partly responsible not only for the high deposition rates which characterize the lower Yellow River, but also for mass erosion during river floods.  相似文献   

17.
窦鲁星  张昌民  张莉  毕小龙  杨沁超 《地质论评》2023,69(4):2023040013-2023040013
洪水型重力流是重力流沉积学的研究热点,以往研究认为洪水型重力流具有紊流支撑的流体性质,对于其流体性质转化及其沉积记录的识别不够深入。近年研究揭示重力流沉积过程中可形成多种过渡型流体,具有特殊流体转换机制和沉积特征。通过调研国内外最新文献,系统介绍了过渡型流体基本特征、沉积机制方面的研究进展,并讨论了其对洪水型重力流沉积研究的启示及地质意义。研究结果表明：在少量黏土矿物影响下,沉积物重力流流体的性质即可由紊流向层流转化,形成特殊的过渡型流体。转化过程主要取决于黏土矿物含量和类型控制的流体内聚力和流速控制的紊流应力二者之间的相互作用。过渡型流体可以产生大型流水沙纹（large current ripple）、砂质纹层—泥质纹层间互形成的低幅度沙波（low amplitude bed wave）等独特的底床类型。尽管实验研究揭示了过渡型流体可能形成的沉积底床特征,针对洪水型重力流沉积记录中过渡型流体的解释仍十分缺乏,尤其是过渡型流体转换机制及其沉积响应仍亟待深入探索。过渡型流体的沉积底形是研究洪水型重力流沉积动力机制的重要载体,可为深入理解洪水型重力流沉积过程提供新视角,同时可能具有更广泛的沉积学研究价值。  相似文献   

18.
The Marnoso Arenacea Formation provides the most extensive correlation of individual flow deposits (beds) yet documented in an ancient turbidite system. These correlations provide unusually detailed constraints on bed shape, which is used to deduce flow evolution and assess the validity of numerical and laboratory models. Bed volumes have an approximately log‐normal frequency distribution; a small number of flows dominated sediment supply to this non‐channelized basin plain. Turbidite sandstone within small‐volume (<0·7 km3) beds thins downflow in an approximately exponential fashion. This shape is a property of spatially depletive flows, and has been reproduced by previous mathematical models and laboratory experiments. Sandstone intervals in larger‐volume (0·7–7 km3) beds have a broad thickness maximum in their proximal part. Grain‐size trends within this broad thickness maximum indicate spatially near‐uniform flow for distances of ∼30 km, although the flow was temporally unsteady. Previous mathematical models and laboratory experiments have not reproduced this type of deposit shape. This may be because models fail to simulate the way in which near bed sediment concentration tends towards a constant value (saturates) in powerful flows. Alternatively, the discrepancy may be the result of relatively high ratios of flow thickness and sediment settling velocity in submarine flows, together with very gradual changes in sea‐floor gradient. Intra‐bed erosion, temporally varying discharge, and reworking of suspension fallout as bedload could also help to explain the discrepancy in deposit shape. Most large‐volume beds contain an internal erosion surface underlain by inversely graded sandstone, recording waxing and waning flow. It has been inferred previously that these characteristics are diagnostic of turbidites generated by hyperpycnal flood discharge. These turbidites are too voluminous to have been formed by hyperpycnal flows, unless such flows are capable of eroding cubic kilometres of sea‐floor sediment. It is more likely that these flows originated from submarine slope failure. Two beds comprise multiple sandstone intervals separated only by turbidite mudstone. These features suggest that the submarine slope failures occurred as either a waxing and waning event, or in a number of stages.  相似文献   

19.
洪水型重力流是重力流沉积学的研究热点,以往研究认为洪水型重力流具有紊流支撑的流体性质,对于其流体性质转化及其沉积记录的识别不够深入。近年研究揭示重力流沉积过程中可形成多种过渡型流体,具有特殊流体转换机制和沉积特征。通过调研国内外最新文献,系统介绍了过渡型流体基本特征、沉积机制方面的研究进展,并讨论了其对洪水型重力流沉积研究的启示及地质意义。研究结果表明：在少量黏土矿物影响下,沉积物重力流流体的性质即可由紊流向层流转化,形成特殊的过渡型流体。转化过程主要取决于黏土矿物含量和类型控制的流体内聚力和流速控制的紊流应力二者之间的相互作用。过渡型流体可以产生大型流水沙纹(large current ripple)、砂质纹层—泥质纹层间互形成的低幅度沙波(low amplitude bed wave)等独特的底床类型。尽管实验研究揭示了过渡型流体可能形成的沉积底床特征,针对洪水型重力流沉积记录中过渡型流体的解释仍十分缺乏,尤其是过渡型流体转换机制及其沉积响应仍亟待深入探索。过渡型流体的沉积底形是研究洪水型重力流沉积动力机制的重要载体,可为深入理解洪水型重力流沉积过程提供新视角,同时可能具有更广泛的...  相似文献   

20.
ABSTRACT Mud‐rich sandstone beds in the Lower Cretaceous Britannia Formation, UK North Sea, were deposited by sediment flows transitional between debris flows and turbidity currents, termed slurry flows. Much of the mud in these flows was transported as sand‐ and silt‐sized grains that were approximately hydraulically equivalent to suspended quartz and feldspar. In the eastern Britannia Field, individual slurry beds are continuous over long distances, and abundant core makes it possible to document facies changes across the field. Most beds display regular areal grain‐size changes. In this study, fining trends, especially in the size of the largest grains, are used to estimate palaeoflow and palaeoslope directions. In the middle part of the Britannia Formation, stratigraphic zones 40 and 45, slurry flows moved from south‐west and south towards the north‐east and north. Most zone 45 beds lens out before reaching the northern edge of the field, apparently by wedging out against the northern basin slope. Zone 40 and 45 beds show downflow facies transitions from low‐mud‐content, dish‐structured and wispy‐laminated sandstone to high‐mud‐content banded units. In zone 50, at the top of the formation, flows moved from north to south or north‐west to south‐east, and their deposits show transitions from proximal mud‐rich banded and mixed slurried beds to more distal lower‐mud‐content banded and wispy‐laminated units. The contrasting facies trends in zones 40 and 45 and zone 50 may reflect differing grain‐size relationships between quartz and feldspar grains and mud particles in the depositing flows. In zones 40 and 45, quartz grains average 0·30–0·32 mm in diameter, ≈ 0·10 mm coarser than in zone 50. The medium‐grained quartz in zones 40 and 45 flows may have been slightly coarser than the associated mud grains, resulting in the preferential deposition of quartz in proximal areas and downslope enrichment of the flows in mud. In zone 50 flows, mud was probably slightly coarser than the associated fine‐grained quartz, resulting in early mud sedimentation and enrichment of the distal flows in fine‐grained quartz and feldspar. Mud particles in all flows may have had an effective grain size of ≈ 0·25 mm. Both mud content and suspended‐load fallout rate played key roles in the sedimentation of Britannia slurry flows and structuring of the resulting deposits. During deposition of zones 40 and 45, the area of the eastern Britannia Field in block 16/26 may have been a locally enclosed subbasin within which the depositing slurry flows were locally ponded. Slurry beds in the eastern Britannia Field are ‘lumpy’ sheet‐like bodies that show facies changes but little additional complexity. There is no thin‐bedded facies that might represent waning flows analogous to low‐density turbidity currents. The dominance of laminar, cohesion‐dominated shear layers during sedimentation prevented most bed erosion, and the deposystem lacked channel, levee and overbank facies that commonly make up turbidity current‐dominated systems. Britannia slurry flows, although turbulent and capable of size‐fractionating even fine‐grained sediments, left sand bodies with geometries and facies more like those deposited by poorly differentiated laminar debris flows.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号