首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 515 毫秒
1.
Quality assessment of GPS reprocessed terrestrial reference frame   总被引：5，自引：1，他引：4  
The International GNSS Service (IGS) contributes to the construction of the International Terrestrial Reference Frame (ITRF) by submitting time series of station positions and Earth Rotation Parameters (ERP). For the first time, its submission to the ITRF2008 construction is based on a combination of entirely reprocessed GPS solutions delivered by 11 Analysis Centers (ACs). We analyze the IGS submission and four of the individual AC contributions in terms of the GNSS frame origin and scale, station position repeatability and time series seasonal variations. We show here that the GPS Terrestrial Reference Frame (TRF) origin is consistent with Satellite laser Ranging (SLR) at the centimeter level with a drift lower than 1 mm/year. Although the scale drift compared to Very Long baseline Interferometry (VLBI) and SLR mean scale is smaller than 0.4 mm/year, we think that it would be premature to use that information in the ITRF scale definition due to its strong dependence on the GPS satellite and ground antenna phase center variations. The new position time series also show a better repeatability compared to past IGS combined products and their annual variations are shown to be more consistent with loading models. The comparison of GPS station positions and velocities to those of VLBI via local ties in co-located sites demonstrates that the IGS reprocessed solution submitted to the ITRF2008 is more reliable and precise than any of the past submissions. However, we show that some of the remaining inconsistencies between GPS and VLBI positioning may be caused by uncalibrated GNSS radomes.  相似文献   

2.
We examine the contribution of the Doppler Orbit determination and Radiopositioning Integrated by Satellite (DORIS) technique to the International Terrestrial Reference Frame (ITRF2005) by evaluating the quality of the submitted solutions as well as that of the frame parameters, especially the origin and the scale. Unlike the previous versions of the ITRF, ITRF2005 is constructed with input data in the form of time-series of station positions (weekly for satellite techniques and daily for VLBI) and daily Earth orientation parameters (EOPs), including full variance–covariance information. Analysis of the DORIS station positions’ time-series indicates an internal precision reaching 15 mm or better, at a weekly sampling. A cumulative solution using 12 years of weekly time-series was obtained and compared to a similar International GNSS Service (IGS) GPS solution (at 37 co-located sites) yielding a weighted root mean scatter (WRMS) of the order of 8 mm in position (at the epoch of minimum variance) and about 2.5 mm/year in velocity. The quality of this cumulative solution resulting from the combination of two individual DORIS solutions is better than any individual solution. A quality assessment of polar motion embedded in the contributed DORIS solutions is performed by comparison with the results of other space-geodetic techniques and in particular GPS. The inferred WRMS of polar motion varies significantly from one DORIS solution to another and is between 0.5 and 2 mas, depending on the strategy used and in particular estimating or not polar motion rate by the analysis centers. This particular aspect certainly needs more investigation by the DORIS Analysis Centers.  相似文献   

3.
ITRF2008: an improved solution of the international terrestrial reference frame   总被引：53，自引：38，他引：15  
ITRF2008 is a refined version of the International Terrestrial Reference Frame based on reprocessed solutions of the four space geodetic techniques: VLBI, SLR, GPS and DORIS, spanning 29, 26, 12.5 and 16?years of observations, respectively. The input data used in its elaboration are time series (weekly from satellite techniques and 24-h session-wise from VLBI) of station positions and daily Earth Orientation Parameters (EOPs). The ITRF2008 origin is defined in such a way that it has zero translations and translation rates with respect to the mean Earth center of mass, averaged by the SLR time series. Its scale is defined by nullifying the scale factor and its rate with respect to the mean of VLBI and SLR long-term solutions as obtained by stacking their respective time series. The scale agreement between these two technique solutions is estimated to be 1.05 ± 0.13 ppb at epoch 2005.0 and 0.049 ± 0.010?ppb/yr. The ITRF2008 orientation (at epoch 2005.0) and its rate are aligned to the ITRF2005 using 179 stations of high geodetic quality. An estimate of the origin components from ITRF2008 to ITRF2005 (both origins are defined by SLR) indicates differences at epoch 2005.0, namely: ?0.5, ?0.9 and ?4.7?mm along X, Y and Z-axis, respectively. The translation rate differences between the two frames are zero for Y and Z, while we observe an X-translation rate of 0.3?mm/yr. The estimated formal errors of these parameters are 0.2?mm and 0.2?mm/yr, respectively. The high level of origin agreement between ITRF2008 and ITRF2005 is an indication of an imprecise ITRF2000 origin that exhibits a Z-translation drift of 1.8?mm/yr with respect to ITRF2005. An evaluation of the ITRF2008 origin accuracy based on the level of its agreement with ITRF2005 is believed to be at the level of 1?cm over the time-span of the SLR observations. Considering the level of scale consistency between VLBI and SLR, the ITRF2008 scale accuracy is evaluated to be at the level of 1.2?ppb (8?mm at the equator) over the common time-span of the observations of both techniques. Although the performance of the ITRF2008 is demonstrated to be higher than ITRF2005, future ITRF improvement resides in improving the consistency between local ties in co-location sites and space geodesy estimates.  相似文献   

4.
The 2008 DGFI realization of the ITRS: DTRF2008   总被引：11，自引：11，他引：0  
A new realization of the International Terrestrial System was computed at the ITRS Combination Centre at DGFI as a contribution to ITRF2008. The solution is labelled DTRF2008. In the same way as in the DGFI computation for ITRF2005 it is based on either normal equation systems or estimated parameters derived from VLBI, SLR, GPS and DORIS observations by weekly or session-wise processing. The parameter space of the ITRS realization comprises station positions and velocities and daily resolved Earth Orientation Parameters (EOP), whereby for the first time also nutation parameters are included. The advantage of starting from time series of input data is that the temporal behaviour of geophysical parameters can be investigated to decide whether the parameters can contribute to the datum realization of the ITRF. In the same way, a standardized analysis of station position time series can be performed to detect and remove discontinuities. The advantage of including EOP in the ITRS realization is twofold: (1) the combination of the coordinates of the terrestrial pole—estimated from all contributing techniques—links the technique networks in two components of the orientation, leading to an improvement of consistency of the Terrestrial Reference Frame (TRF) and (2) in their capacity as parameters common to all techniques, the terrestrial pole coordinates enhance the selection of local ties as they provide a measure for the consistency of the combined frame. The computation strategy of DGFI is based on the combination of normal equation systems while at the ITRS Combination Centre at IGN solutions are combined. The two independent ITRS realizations provide the possibility to assess the accuracy of ITRF by comparison of the two frames. The accuracy evaluation was done separately for the datum parameters (origin, orientation and scale) and the network geometry. The accuracy of the datum parameters, assessed from the comparison of DTRF2008 and ITRF2008, is between 2–5?mm and 0.1–0.8?mm/year depending on the technique. The network geometry (station positions and velocities) agrees within 3.2?mm and 1.0?mm/year. A comparison of DTRF2008 and ITRF2005 provides similar results for the datum parameters, but there are larger differences for the network geometry. The internal accuracy of DTRF2008—that means the level of conservation of datum information and network geometry within the combination—was derived from comparisons with the technique-only multi-year solutions. From this an internal accuracy of 0.32?mm for the VLBI up to 3.3?mm for the DORIS part of the network is found. The internal accuracy of velocities ranges from 0.05?mm/year for VLBI to 0.83?mm/year for DORIS. The internal consistency of DTRF2008 for orientation can be derived from the analysis of the terrestrial pole coordinates. It is estimated at 1.5–2.5?mm for the GPS, VLBI and SLR parts of the network. The consistency of these three and the DORIS network part is within 6.5?mm.  相似文献   

5.
VLBI terrestrial reference frame contributions to ITRF2008   总被引：6，自引：5，他引：1  
In late 2008, the Product Center for the International Terrestrial Reference Frame (ITRF) of the International Earth Rotation and Reference Systems Service (IERS) issued a call for contributions to the next realization of the International Terrestrial Reference System, ITRF2008. The official contribution of the International VLBI Service for Geodesy and Astrometry (IVS) to ITRF2008 consists of session-wise datum-free normal equations of altogether 4,539 daily Very Long Baseline Interferometry (VLBI) sessions from 1979.7 to 2009.0 including data of 115 different VLBI sites. It is the result of a combination of individual series of session-wise datum-free normal equations provided by seven analysis centers (ACs) of the IVS. All series are completely reprocessed following homogeneous analysis options according to the IERS Conventions 2003 and IVS Analysis Conventions. Altogether, nine IVS ACs analyzed the full history of VLBI observations with four different software packages. Unfortunately, the contributions of two ACs, Institute of Applied Astronomy (IAA) and Geoscience Australia (AUS), had to be excluded from the combination process. This was mostly done because the IAA series exhibits a clear scale offset while the solution computed from normal equations contained in the AUS SINEX files yielded unreliable results. Based on the experience gathered since the combination efforts for ITRF2005, some discrepancies between the individual series were discovered and overcome. Thus, the consistency of the individual VLBI solutions has improved considerably. The agreement in terms of WRMS of the Terrestrial Reference Frame (TRF) horizontal components is 1 mm, of the height component 2 mm. Comparisons between ITRF2005 and the combined TRF solution for ITRF2008 yielded systematic height differences of up to 5 mm with a zonal signature. These differences can be related to a pole tide correction referenced to a zero mean pole used by four of five IVS ACs in the ITRF2005 contribution instead of a linear mean pole path as recommended in the IERS Conventions. Furthermore, these systematics are the reason for an offset in the scale of 0.4 ppb between the IVS’ contribution to ITRF2008 and ITRF2005. The Earth orientation parameters of seven series used as input for the IVS combined series are consistent to a huge amount with about 50 μas WRMS in polar motion and 3 μs in dUT1.  相似文献   

6.
We develop a method to evaluate the terrestrial reference frame (TRF) scale rate error using Global Positioning System (GPS) satellite antenna phase center offset (APCO) parameters and apply it to ITRF2008. We search for the TRF in which z-APCO parameters have the smallest drift. In order to provide realistic error bars for the z-APCO drifts, we pay attention to model periodic variations and auto-correlated noise processes in the z-APCO time series. We will show that the GPS scale rate with respect to a frame is, as a first approximation, proportional to the estimated mean z-APCO trend if that frame is used to constrain station positions. Thus, an ITRF2008 scale rate error between ?0.27 and ?0.06 mm/yr depending on the GPS analysis center can be estimated, which demonstrates the high quality of the newly constructed ITRF2008. We will also demonstrate that the traditional estimates of the GPS scale rate from 7-parameter similarity transformations are consistent with our newly derived GPS scale rates with respect to ITRF2008 within two sigmas. We find using International GNSS Service (IGS) products that the traditional approach is relevant for scale rate determination even if some of the z-APCO values supplied by the IGS were not simultaneously calibrated. As the scale rate is related to the accuracy of vertical velocities, our estimates supply a conservative evaluation that can be used for error budget computation.  相似文献   

7.
NOAA’s National Geodetic Survey (NGS) has been one of the Analysis Centers (ACs) of the International GNSS Service (IGS) since its inception in 1994. Solutions for daily GPS orbits and Earth orientation parameters are regularly contributed to the IGS Rapid and Final products, as well as solutions of weekly station positions. These solutions are combined with those of the other ACs and then the resultant IGS products are distributed to users. To perform these tasks, NGS has developed and refined the Program for the Adjustment of GPS EphemerideS (PAGES) software. Although PAGES has continuously evolved over the past 15 years, recent efforts have focused mostly on updating models and procedures to conform more closely to IGS and the International Earth Rotation Service (IERS) conventions. Details of our processing updates and demonstrations of the improvements will be provided.  相似文献   

8.
The SIRGAS permanent GPS network which is in fact the IGS network densification for the American continent, consists today of more than 200 stations covering the continent and islands. It is currently processed by the IGS RNAAC SIR centre at Deutsches Geodätisches Forschungsinstitut producing weekly free solutions relying on IGS final orbits and EOP that contribute to the ITRF through IGS. By August 2006, the SIRGAS Working Group I had accepted five proposals for experimental processing centers within the region that would collaborate with IGS RNAAC SIR. One of them, Centro de Procesamiento La Plata (CPLat) in Argentina, began processing 60 stations on October 2006. By January 2007 CPLat reached operational capability, delivering weekly free solution SINEX files, with an internal consistency of 1.5 mm average for the horizontal components, and 3 mm in the vertical. Comparisons with IGS global and IGS RNAAC SIR weekly solutions were taken as external consistency indications, showing average RMS residuals of 1.8, 2.4 and 5 mm for the north, east, and vertical component, respectively. Analysis and comparison of adjusted solution time series from CPLat and other processing centers has proved to be highly valuable for solution QC, namely detection and identification of station anomalous behavior or modelling problems. These procedures will ensure the maintenance of the performance specifications for CPLat solutions. Action is being taken in order to guarantee the continuity of this effort beyond the experimental phase.  相似文献   

9.
The International GNSS Service (IGS) routinely generates a number of weekly, daily and sub-daily products. Station coordinates and velocities, earth rotation parameters (ERPs) and apparent geocenter are among these products generated weekly by the IGS Reference Frame Coordinator. They have been determined since 1999 by combining independent estimates from at least seven IGS Analysis Centers (ACs). Two Global Network Associate Analysis Centers (GNAACs) also provide independent combinations using the same AC weekly solutions and they are currently used to quality control the IGS combination. The combined solutions are aligned to an IGS realization (IGS05) of the ITRF2005 using a carefully selected set of the IGS Reference Frame (RF) stations (nominally 132). During the combination process, the contributing solutions are compared and outliers are removed to ensure a high level of consistency of the estimated parameters. The ACs and the weekly combined solution are consistent at the 1–2 and 3–4 mm levels for the horizontal and vertical components. Similarly, the excess Length of Day (LOD), the pole positions and pole rates are consistent at the 10μs, 0.03–0.05 mas and 0.10–0.20 mas/day levels, respectively. The consistency of the apparent geocenter estimate is about 5 mm in the X and Y components and 10 mm in the Z component. Comparison of the IGS-combined ERP estimates with the IERS Bulletin A suggests a small bias of the order of ?0.04 mas and + 0.05 mas (both ±0.05 mas) in the x and y components.  相似文献   

10.
ITRF2014是地球参考系的最新实现。该框架利用正弦函数估计负荷对台站位置的季节性效应,与ITRF2008相比,可以得到更稳定、精确的速度场;另外,ITRF2014引入了震后形变模型,可以更好地分析测站的非线性运动。本文通过分析发现:ITRF2014其原点相较于ITRF2008,其符合精度为3.5 mm;两种技术(VLBI和SLR)在2010.0历元确定的尺度因子不符值为1.18 ppb;同时,局部测量解与空间大地测量解解算的本地连接向量仍存在较大不符。  相似文献   

11.
New IGS Station and Satellite Clock Combination   总被引：3，自引：5，他引：3  
Following the principles set forth in the Position Paper #3 at the 1998 Darmstadt Analysis Center (AC) Workshop on the new International GPS Service (IGS) International Terrestrial Reference Frame (ITRF) realization and discussions at the 1999 La Jolla AC workshop, a new clock combination program was developed. The program allows for the input of both SP3 and the new clock (RINEX) format (ftp://igsch.jpl.nasa.gov//igscb/data/format/rinex_clock.txt). The main motivation for this new development is the realization of the goals of the IGS/BIPM timing project. Besides this there is a genuine interest in station clocks and a need for a higher sampling rate of the IGS clocks (currently limited to 15 min due to the SP3 format). The inclusion of station clocks should also allow for a better alignment of the individual AC solutions and should enable the realization of a stable GPS time-scale. For each input AC clock solution the new clock combination solves and corrects for reference clock errors/instabilities as well as satellite/station biases, geocenter and station/satellite orbit errors. External station clock calibrations and/or constraints, such as those resulting from the IGS/BIPM timing pilot project, can be introduced via a subset of the fiducial timing station set, to facilitate a precise and consistent IGS UTC realization for both station and satellite combined clock solutions. Furthermore, the new clock combination process enforces strict strict conformity and consistency with the current and future IGS standards. The new clock combination maintains orbit/clock consistency at millimeter level, which is comparable to the best AC orbit/clock solutions. This is demonstrated by static GIPSY precise point positioning tests using GPS week 0995 data for stations in both Northern and Southern Hemispheres and similar tests with the Bernese software using more recent data from GPS week 1081. ? 2001 John Wiley & Sons, Inc.  相似文献   

12.
The EUREF [International Association of Geodesy (IAG) Reference Frame Sub-Commission for Europe] network of continuously operating GPS stations (EPN) was primarily established for reference frame maintenance, and also plays an important role for geodynamical research in Europe. The main objective of this paper is to obtain an independent homogeneous time series of the EPN station coordinates, which is also available in SINEX format. A new combined solution of the EPN station coordinates was computed. The combination was performed independently for every week, in three steps: (1) the stated constraints on the coordinates were removed from the individual solutions of the Analysis Centers; (2) the de-constrained solutions were aligned to ITRF2000; (3) the resulting solutions were combined using the Helmert blocking technique. All the data from GPS weeks 900 to 1302 (April 1997–December 2004) were used. We investigated in detail the behavior of the transformation parameters aligning the new combined solution to ITRF2000. In general, the time series of the transformation parameters show a good stability in time although small systematic effects can be seen, most likely caused by station instabilities. A comparison of the new combined solution to the official EUREF weekly combined solution is also presented.  相似文献   

13.
In preparation of activities planned for the realization of the Global Geodetic Observing System (GGOS), a group of German scientists has carried out a study under the acronym GGOS-D which closely resembles the ideas behind the GGOS initiative. The objective of the GGOS-D project was the investigation of the methodological and information-technological realization of a global geodetic-geophysical observing system and especially the integration and combination of the space geodetic observations. In the course of this project, highly consistent time series of GPS, VLBI, and SLR results were generated based on common state-of-the-art standards for modeling and parameterization. These series were then combined to consistently and accurately compute a Terrestrial Reference Frame (TRF). This TRF was subsequently used as the basis to produce time series of station coordinates, Earth orientation, and troposphere parameters. In this publication, we present results of processing algorithms and strategies for the integration of the space-geodetic observations which had been developed in the project GGOS-D serving as a prototype or a small and limited version of the data handling and processing part of a global geodetic observing system. From a comparison of the GGOS-D terrestrial reference frame results and the ITRF2005, the accuracy of the datum parameters is about 5?C7?mm for the positions and 1.0?C1.5?mm/year for the rates. The residuals of the station positions are about 3?mm and between 0.5 and 1.0?mm/year for the station velocities. Applying the GGOS-D TRF, the offset of the polar motion time series from GPS and VLBI is reduced to 50 ??as (equivalent to 1.5?mm at the Earth??s surface). With respect to troposphere parameter time series, the offset of the estimates of total zenith delays from co-located VLBI and GPS observations for most stations in this study is smaller than 1.5?mm. The combined polar motion components show a significantly better WRMS agreement with the IERS 05C04 series (96.0/96.0???as) than VLBI (109.0/100.7???as) or GPS (98.0/99.5???as) alone. The time series of the estimated parameters have not yet been combined and exploited to the extent that would be possible. However, the results presented here demonstrate that the experiences made by the GGOS-D project are very valuable for similar developments on an international level as part of the GGOS development.  相似文献   

14.
Ambiguity resolution dedicated to a single global positioning system (GPS) station can improve the accuracy of precise point positioning. In this process, the estimation accuracy of the narrow-lane fractional-cycle biases (FCBs), which destroy the integer nature of undifferenced ambiguities, is crucial to the ambiguity-fixed positioning accuracy. In this study, we hence propose the improved narrow-lane FCBs derived from an ambiguity-fixed GPS network solution, rather than the original (i.e. previously proposed) FCBs derived from an ambiguity-float network solution. The improved FCBs outperform the original FCBs by ensuring that the resulting ambiguity-fixed daily positions coincide in nature with the state-of-the-art positions generated by the International GNSS Service (IGS). To verify this improvement, 1?year of GPS measurements from about 350 globally distributed stations were processed. We find that the original FCBs differ more from the improved FCBs when fewer stations are involved in the FCB estimation, especially when the number of stations is less than 20. Moreover, when comparing the ambiguity-fixed daily positions with the IGS weekly positions for 248 stations through a Helmert transformation, for the East component, we find that on 359 days of the year the daily RMS of the transformed residuals based on the improved FCBs is smaller by up to 0.8?mm than those based on the original FCBs, and the mean RMS over the year falls evidently from 2.6 to 2.2?mm. Meanwhile, when using the improved rather than the original FCBs, the RMS of the transformed residuals for the East component of 239 stations (i.e. 96.4% of all 248 stations) is clearly reduced by up to 1.6?mm, especially for stations located within a sparse GPS network. Therefore, we suggest that narrow-lane FCBs should be determined with ambiguity-fixed, rather than ambiguity-float, GPS network solutions.  相似文献   

15.
Combining the orbits of the IGS Analysis Centers   总被引：1，自引：0，他引：1  
Currently seven Analysis Centers of the International GPS Service for Geodynamics (IGS) are producing daily precise orbits and the corresponding Earth Orientation Parameters (EOP). These individual products are available at several IGS Data Centers (e.g. CDDIS, IGN, SIO, etc.). During 1993 no official IGS orbits were produced, but the routine orbit comparisons by IGS indicated that, after small orientation and scale alignments, the orbit consistency was approaching the 20 cm level (a coordinate RMS), and that some orbit combination should be possible and feasible. An IGS combined orbit could provide a precise and efficient extension of the IERS Terrestrial Reference Frame (ITRF). Another advantage of such a combined orbit would be reliability and precision.Two schemes of orbit combinations are considered here: (a) the first method consists of a weighted averaging process of the earth-fixed satellite positions as produced by the individual Centers; (b) the second method uses the individual IGS orbit files as pseudo-observations in an orbit determination process, where in addition to the initial conditions, different parameter sets may be estimated. Both orbit combination methods have been tested on the January 1993 orbit data sets (GPS weeks 680 and 681) with an impressive agreement at the 5 cm level (coordinate RMS). The quality of the combined orbits is checked by processing a set of continental baselines in two different regions of the globe using different processing softwares. Both types of combined orbits gave similar baseline repeatability of a few ppb in both regions which compared favorably to the best individual orbits in the region.  相似文献   

16.
Time series of daily position solutions at eight co-located GPS and VLBI stations are used to assess the frequency features in the solutions over various time-scales. This study shows that there are seasonal and inter-annual signals in all three coordinate components of the GPS and VLBI solutions. The power and frequency of the signals vary with time, the station considered and the coordinate components, and between the GPS and VLBI solutions. In general, the magnitudes of the signals in the horizontal coordinate components (latitude and longitude) are weaker than those in the height component. The weighted means of the estimated annual amplitudes from the eight GPS stations are, respectively, 1.0, 0.8 and 3.6 mm for the latitude, longitude and height components, and are, respectively, 1.5, 0.7 and 2.2 mm for the VLBI solutions. The phases of the annual signals estimated from the GPS and VLBI solutions are consistent for most of the co-located stations. The seasonal signals estimated from the VLBI solutions are, in general, more stable than those estimated from the GPS solutions. Fluctuations at inter-annual time-scales are also found in the series. The inter-annual fluctuations are up to ∼5 mm for the latitude and longitude components, and up to ∼10 mm for the height component. The effects of the seasonal and inter-annual variations on the estimated linear rates of movement of the stations are also evaluated.  相似文献   

17.
Since 21 June 1992 the International GPS Service (IGS), renamed International GNSS Service in 2005, produces and makes available uninterrupted time series of its products, in particular GPS observations from the IGS Global Network, GPS orbits, Earth orientation parameters (components x and y of polar motion, length of day) with daily time resolution, satellite and receiver clock information for each day with different latencies and accuracies, and station coordinates and velocities in weekly batches for further analysis by the IERS (International Earth Rotation and Reference Systems Service). At a later stage the IGS started exploiting its network for atmosphere monitoring, in particular for ionosphere mapping, for troposphere monitoring, and time and frequency transfer. This is why new IGS products encompass ionosphere maps and tropospheric zenith delays. This development became even more important when more and more space-missions carrying space-borne GPS for various purposes were launched. This article offers an overview for the broader scientific community of the development of the IGS and of the spectrum of topics addressed today with IGS data and products.  相似文献   

18.
CNES (Centre National d’Etudes Spatiales) and CLS (Collecte Localisation Satellites) became an International GNSS Service (IGS) Analysis Center (AC) the 20th of May 2010. Since 2009, we are using the integer ambiguity fixing at the zero-difference level strategy in our software package (GINS/Dynamo) as an alternative to classical differential approaches. This method played a key role among all the improvements in the GPS processing we made during this period. This paper provides to the users the theoretical background, the strategies and the models used to compute the products (GPS orbits and clocks, weekly station coordinate estimates and Earth orientation parameters) that are submitted weekly to the IGS. The practical realization of the two-step, ambiguity-fixing scheme (wide-lane and narrow-lane) is described in detail. The ambiguity fixing improved our orbit overlaps from 6 to 3?cm WRMS in the tangential and normal directions. Since 2008, our products have been also regularly compared to the IGS final solutions by the IGS Analysis Center Coordinator. The joint effects of ambiguity fixing and dynamical model changes (satellite solar radiation pressure and albedo force) improved the consistency with IGS orbits from 35 to 18?mm 3D-WRMS. Our innovative strategy also gives additional powerful properties to the GPS satellite phase clock solutions. Single receiver (zero-difference) ambiguity resolution becomes possible. An overview of the applications is given.  相似文献   

19.
O. Titov 《Journal of Geodesy》2007,81(6-8):455-468
This paper evaluates the effect of the accuracy of reference radio sources on the daily estimates of station positions, nutation angle offsets, and the estimated site coordinates determined by very long baseline interferometry (VLBI), which are used for the realization of the international terrestrial reference frame (ITRF). Five global VLBI solutions, based on VLBI data collected between 1979 and 2006, are compared. The reference solution comprises all observed radio sources, which are treated as global parameters. Four other solutions, comprising different sub-sets of radio sources, were computed. The daily station positions for all VLBI sites and the corrections to the nutation offset angles were estimated for these five solutions. The solution statistics are mainly affected by the positional instabilities of reference radio sources, whereas the instabilities of geodetic and astrometric time-series are caused by an insufficient number of observed reference radio sources. A mean offset of the three positional components (Up, North, East) between any two solutions was calculated for each VLBI site. From a comparison of the geodetic results, no significant discrepancies between the respective geodetic solutions for all VLBI sites in the Northern Hemisphere were found. In contrast, the Southern Hemisphere sites were more sensitive to the selected set of reference radio sources. The largest estimated mean offset of the vertical component between two solutions for the Australian VLBI site at Hobart was 4 mm. In the worst case (if a weak VLBI network observed a limited number of reference radio sources) the daily offsets of the estimated height component at Hobart exceeded 100 mm. The exclusion of the extended radio sources from the list of reference sources improved the solution statistics and made the geodetic and astrometric time-series more consistent. The problem with the large Hobart height component offset is magnified by a comparatively small number of observations due to the low slewing rate of the VLBI dish (1°/ s). Unless a minimum of 200 scans are performed per 24-h VLBI experiment, the daily vertical positions at Hobart do not achieve 10 mm accuracy. Improving the slew rate at Hobart and/or having an increased number of new sites in the Southern Hemisphere is essential for further improvement of geodetic VLBI results for Southern Hemisphere sites.  相似文献   

20.
 The solutions of the CODE Analysis Center submitted to the IGS, the International Global Position System (GPS) Service for Geodynamics, are based on three days of observation of about 80–100 stations of the IGS network. The Earth rotation parameters (ERPs) are assumed to vary linearly over the three days with respect to an a priori model. Continuity at the day boundaries as well as the continuity of the first derivatives are enforced by constraints. Since early April 1995 CODE has calculated a new ERP series with an increased time resolution of 2 hours. Again continuity is enforced at the 2-hours-interval boundaries. The analysis method is described, particularly how to deal with retrograde diurnal terms in the ERP series which may not be estimated with satellite geodetic methods. The results obtained from the first year of data covered by the time series (time interval from 4 April 1995 to 30 June 1996) are also discussed. The series is relatively homogeneous in the sense of the used orbit model and the a priori model for the ERPs. The largest source of excitation at daily and sub-daily periods is likely to be the effect of the ocean tides. There is good agreement between the present results and Topex/Poseidon ocean tide models, as well as with models based on Very Long Baseline Interferometry (VLBI) and Satellite Laser Ranging (SLR) data. Non-oceanic periodic variations are also observed in the series. Their origin is most probably a consequence of the GPS solution strategy; other possible sources are the atmospheric tides. Received: 13 July 1999 / Accepted: 21 March 2000  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号