首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Elastic properties of rocks play a major and crucial role for the design of any engineering structure. Determination of elastic properties in laboratory is tedious, laborious, very time consuming, as well as expertise is required, whereas determination of uniaxial compressive strength (UCS) and tensile strength in laboratory is simple, easy, and less expertise is required. Here, an attempt has been made to predict the elastic properties (Poisson’s ratio and Young’s modulus) of the schistose rocks from unconfined strength (UCS and tensile strength) using artificial neural network (ANN). A three-layer feed-forward back propagation neural network with 2-5-2 architecture was trained up to 855 epochs to predict the elastic properties of rock mass. The network was trained and tested by 120 data sets, and validation of the network was done by 20 new randomly selected data sets of UCS and tensile strength. The samples were collected from the schistose rocks of Nathpa-Jhakri hydropower project site, SJVNL, Himachal Pradesh, India. To check the validity and suitability of the artificial neural network technique, multivariate regression analysis (MVRA) is also performed, and comparison has been made. It was found that ANN gives closer values of predicted Poisson’s ratio and Young’s modulus as compared to MVRA. The coefficient of determination for Poisson’s ratio was 0.9809 and 0.843 by ANN and MVRA, respectively, whereas 0.9922 and 0.9362 for Young’s modulus by ANN and MVRA, respectively. The mean absolute percentage error (MAPE) for Young’s modulus is 11.13 and 28.21 by ANN and MVRA, respectively; whereas MAPE for Poisson’s ratio is 3.64 and 9.23 by ANN and MVRA, respectively.  相似文献   

2.
Accurate laboratory measurement of geo-engineering properties of intact rock including uniaxial compressive strength (UCS) and modulus of elasticity (E) involves high costs and a substantial amount of time. For this reason, it is of great necessity to develop some relationships and models for estimating these parameters in rock engineering. The present study was conducted to forecast UCS and E in the sedimentary rocks using artificial neural networks (ANNs) and multivariable regression analysis (MLR). For this purpose, a total of 196 rock samples from four rock types (i.e., sandstone, conglomerate, limestone, and marl) were cored and subjected to comprehensive laboratory tests. To develop the predictive models, physical properties of studied rocks such as P wave velocity (Vp), dry density (γd), porosity, and water absorption (Ab) were considered as model inputs, while UCS and E were the output parameters. We evaluated the performance of MLR and ANN models by calculating correlation coefficient (R), mean absolute error (MAE), and root-mean-square error (RMSE) indices. The comparison of the obtained results revealed that ANN outperforms MLR when predicting the UCS and E.  相似文献   

3.
Blasting operations usually produce significant environmental problems which may cause severe damage to the nearby areas. Air-overpressure (AOp) is one of the most important environmental impacts of blasting operations which needs to be predicted and subsequently controlled to minimize the potential risk of damage. In order to solve AOp problem in Hulu Langat granite quarry site, Malaysia, three non-linear methods namely empirical, artificial neural network (ANN) and a hybrid model of genetic algorithm (GA)–ANN were developed in this study. To do this, 76 blasting operations were investigated and relevant blasting parameters were measured in the site. The most influential parameters on AOp namely maximum charge per delay and the distance from the blast-face were considered as model inputs or predictors. Using the five randomly selected datasets and considering the modeling procedure of each method, 15 models were constructed for all predictive techniques. Several performance indices including coefficient of determination (R 2), root mean square error and variance account for were utilized to check the performance capacity of the predictive methods. Considering these performance indices and using simple ranking method, the best models for AOp prediction were selected. It was found that the GA–ANN technique can provide higher performance capacity in predicting AOp compared to other predictive methods. This is due to the fact that the GA–ANN model can optimize the weights and biases of the network connection for training by ANN. In this study, GA–ANN is introduced as superior model for solving AOp problem in Hulu Langat site.  相似文献   

4.
Genetic algorithm (GA) and support vector machine (SVM) optimization techniques are applied widely in the area of geophysics, civil, biology, mining, and geo-mechanics. Due to its versatility, it is being applied widely in almost every field of engineering. In this paper, the important features of GA and SVM are discussed as well as prediction of longitudinal wave velocity and its advantages over other conventional prediction methods. Longitudinal wave measurement is an indicator of peak particle velocity (PPV) during blasting and is an important parameter to be determined to minimize the damage caused by ground vibrations. The dynamic wave velocity and physico-mechanical properties of rock significantly affect the fracture propagation in rock. GA and SVM models are designed to predict the longitudinal wave velocity induced by ground vibrations. Chaos optimization algorithm has been used in SVM to find the optimal parameters of the model to increase the learning and prediction efficiency. GA model also has been developed and has used an objective function to be minimized. A parametric study for selecting the optimized parameters of GA model was done to select the best value. The mean absolute percentage error for the predicted wave velocity (V) value has been found to be the least (0.258 %) for GA as compared to values obtained by multivariate regression analysis (MVRA), artificial neural network (ANN), adaptive neuro-fuzzy inference system (ANFIS), and SVM.  相似文献   

5.
The transfer of energy between two adjacent parts of rock mainly depends on its thermal conductivity. Knowledge of the thermal conductivity of rocks is necessary for the calculation of heat flow or for the longtime modeling of geothermal resources. In recent years, considerable effort has been made to develop artificial intelligence techniques to determine these properties. Present study supports the application of artificial neural network (ANN) in the study of thermal conductivity along with other intrinsic properties of rock due to its increasing importance in many areas of rock engineering, agronomy, and geoenvironmental engineering field. In this paper, an attempt has been made to predict the thermal conductivity (TC) of rocks by incorporating uniaxial compressive strength, density, porosity, and P-wave velocity using artificial neural network (ANN) technique. A three-layer feed forward back propagation neural network with 4-7-1 architecture was trained and tested using 107 experimental data sets of various rocks. Twenty new data sets were used for the validation and comparison of the TC by ANN. Multivariate regression analysis (MVRA) has also been done with same data sets of ANN. ANN and MVRA results were compared based on coefficient of determination (CoD) and mean absolute error (MAE) between experimental and predicted values of TC. It was found that CoD between measured and predicted values of TC by ANN and MVRA were 0.984 and 0.914, respectively, whereas MAE was 0.0894 and 0.2085 for ANN and MVRA, respectively.  相似文献   

6.
The accuracies of three different evolutionary artificial neural network (ANN) approaches, ANN with genetic algorithm (ANN-GA), ANN with particle swarm optimization (ANN-PSO) and ANN with imperialist competitive algorithm (ANN-ICA), were compared in estimating groundwater levels (GWL) based on precipitation, evaporation and previous GWL data. The input combinations determined using auto-, partial auto- and cross-correlation analyses and tried for each model are: (i) GWL t?1 and GWL t?2; (ii) GWL t?1, GWL t?2 and P t ; (iii) GWL t?1, GWL t?2 and E t ; (iv) GWL t?1, GWL t?2, P t and E t ; (v) GWL t?1, GWL t?2 and P t?1 where GWL t , P t and E t indicate the GWL, precipitation and evaporation at time t, individually. The optimal ANN-GA, ANN-PSO and ANN-ICA models were obtained by trying various control parameters. The best accuracies of the ANN-GA, ANN-PSO and ANN-ICA models were obtained from input combination (i). The mean square error accuracies of the ANN-GA and ANN-ICA models were increased by 165 and 124% using ANN-PSO model. The results indicated that the ANN-PSO model performed better than the other models in modeling monthly groundwater levels.  相似文献   

7.
Determination of geomechanical parameters of petroleum reservoir and surrounding rock is important for coupled reservoir–geomechanical modeling, borehole stability analysis and hydraulic fracturing design. A displacement back analysis technique based on artificial neural network (ANN) and genetic algorithm (GA) combination is investigated in this paper to identify reservoir geomechanical parameters based on ground surface displacements. An ANN is used to map the nonlinear relationship between Young’s modulus, E, Poisson’s ratio, v, internal friction angle, Φ, cohesion, c and ground surface displacements. The necessary training and testing samples for ANN are created by using numerical analysis. GA is used to search the set of unknown reservoir geomechanical parameters. Results of the numerical experiment show that the displacement back analysis technique based on ANN–GA combination can effectively identify reservoir geomechanical parameters based on ground surface movements as a result of oil and gas production.  相似文献   

8.
Standard Penetration Test(SPT) and Cone Penetration Test(CPT) are the most frequently used field tests to estimate soil parameters for geotechnical analysis and design.Numerous soil parameters are related to the SPT N-value.In contrast,CPT is becoming more popular for site investigation and geotechnical design.Correlation of CPT data with SPT N-value is very beneficial since most of the field parameters are related to SPT N-values.A back-propagation artificial neural network(ANN) model was developed to predict the N6o-value from CPT data.Data used in this study consisted of 109 CPT-SPT pairs for sand,sandy silt,and silty sand soils.The ANN model input variables are:CPT tip resistance(q_c),effective vertical stress(σ'_v),and CPT sleeve friction(f_s).A different set of SPT-CPT data was used to check the reliability of the developed ANN model.It was shown that ANN model either under-predicted the N_(60)-value by 7-16%or over-predicted it by 7-20%.It is concluded that back-propagation neural networks is a good tool to predict N_(60)-value from CPT data with acceptable accuracy.  相似文献   

9.
In the blasting operation, risk of facing with undesirable environmental phenomena such as ground vibration, air blast, and flyrock is very high. Blasting pattern should properly be designed to achieve better fragmentation to guarantee the successfulness of the process. A good fragmentation means that the explosive energy has been applied in a right direction. However, many studies indicate that only 20–30 % of the available energy is actually utilized for rock fragmentation. Involvement of various effective parameters has made the problem complicated, advocating application of new approaches such as artificial intelligence-based techniques. In this paper, artificial neural network (ANN) method is used to predict rock fragmentation in the blasting operation of the Sungun copper mine, Iran. The predictive model is developed using eight and three input and output parameters, respectively. Trying various types of the networks, it was found that a trained model with back-propagation algorithm having architecture 8-15-8-3 is the optimum network. Also, performance comparison of the ANN modeling with that of the statistical method was confirmed robustness of the neural networks to predict rock fragmentation in the blasting operation. Finally, sensitivity analysis showed that the most influential parameters on fragmentation are powder factor, burden, and bench height.  相似文献   

10.
In this paper, we have utilized ANN (artificial neural network) modeling for the prediction of monthly rainfall in Mashhad synoptic station which is located in Iran. To achieve this black-box model, we have used monthly rainfall data from 1953 to 2003 for this synoptic station. First, the Hurst rescaled range statistical (R/S) analysis is used to evaluate the predictability of the collected data. Then, to extract the rainfall dynamic of this station using ANN modeling, a three-layer feed-forward perceptron network with back propagation algorithm is utilized. Using this ANN structure as a black-box model, we have realized the complex dynamics of rainfall through the past information of the system. The approach employs the gradient decent algorithm to train the network. Trying different parameters, two structures, M531 and M741, have been selected which give the best estimation performance. The performance statistical analysis of the obtained models shows with the best tuning of the developed monthly prediction model the correlation coefficient (R), root mean square error (RMSE), and mean absolute error (MAE) are 0.93, 0.99, and 6.02 mm, respectively, which confirms the effectiveness of the developed models.  相似文献   

11.
Backbreak is one of the destructive side effects of the blasting operation. Reducing of this event is very important for economic of a mining project. Involvement of various parameters has made the backbreak analyzing difficult. Currently there is no any specific method to predict or control the phenomenon considering all the effective parameters. In this paper, artificial neural network (ANN) as a powerful tool for solving such complicated problems is used to predict backbreak in blasting operation of the Sangan iron mine, Iran. Network training was fulfilled using a collected database of the practiced operation including blast design details and rock condition. Trying various types of the networks, a network with two hidden layers was found to be optimum. Performance of the ANN model was compared with statistical analysis using datasets which were kept apart from the original database. According to the obtained results, for the ANN model there existed a higher correlation (R2 = 0.868) and lesser error (RMSE = 0.495) between the predicted and measured backbreak as compared to the regression model. Also, sensitivity analysis revealed that the inputs rock factor and number of rows are the most and the least sensitive parameters on the output backbreak, respectively.  相似文献   

12.
Internal geometry and detachment of Coulomb thrust wedges is examined in a combined gravity and pressure force field under various boundary conditions and Coulomb parameters. Frontally buttressed sand wedges accreted with narrow tapers above soles with negligible friction. In these models, serial imbricates stepped-up in conjugate sets which operated synchronously or serially. With increases in sole friction, model Coulomb wedges accreted in piggyback style with enhanced taper but narrower spacing of imbricates. In this mode, flat-topped box-fold anticlines nucleated at the frontal tip of a sole thrust prior to the fore-limb failing as a ramp. The initial ramp-thrusts subsequently rotated and steepened to acquire concave-upwards listric geometry. When cohesion was a significant component of strength, and the sand grains interlocked thoroughly, ramp climb during piggyback thrusting occurred through the generation of a stack of backthrusts. The taper of cohesionless sand wedges, which lack any length scale, was consistent with the critical cohesionless Coulomb wedge taper. In contrast, the taper of experimental cohesive sand wedges, which are scale-dependent, was consistent with the theoretical cohesive Coulomb narrow taper, only when the cohesive length scale was lr ∼ Sr/ϱrar ≤ 10−6. This was constrained by comparing geometry of cohesive sand wedges shortened at different body force per unit mass.  相似文献   

13.
Accurate and reliable prediction of shallow groundwater level is a critical component in water resources management. Two nonlinear models, WA–ANN method based on discrete wavelet transform (WA) and artificial neural network (ANN) and integrated time series (ITS) model, were developed to predict groundwater level fluctuations of a shallow coastal aquifer (Fujian Province, China). The two models were testified with the monitored groundwater level from 2000 to 2011. Two representative wells are selected with different locations within the study area. The error criteria were estimated using the coefficient of determination (R 2), Nash–Sutcliffe model efficiency coefficient (E), and root-mean-square error (RMSE). The best model was determined based on the RMSE of prediction using independent test data set. The WA–ANN models were found to provide more accurate monthly average groundwater level forecasts compared to the ITS models. The results of the study indicate the potential of WA–ANN models in forecasting groundwater levels. It is recommended that additional studies explore this proposed method, which can be used in turn to facilitate the development and implementation of more effective and sustainable groundwater management strategies.  相似文献   

14.
Backbreak is an undesirable phenomenon in blasting operations. It can cause instability of mine walls, falling down of machinery, improper fragmentation, reduced efficiency of drilling, etc. The existence of various effective parameters and their unknown relationships are the main reasons for inaccuracy of the empirical models. Presently, the application of new approaches such as artificial intelligence is highly recommended. In this paper, an attempt has been made to predict backbreak in blasting operations of Soungun iron mine, Iran, incorporating rock properties and blast design parameters using the support vector machine (SVM) method. To investigate the suitability of this approach, the predictions by SVM have been compared with multivariate regression analysis (MVRA). The coefficient of determination (CoD) and the mean absolute error (MAE) were taken as performance measures. It was found that the CoD between measured and predicted backbreak was 0.987 and 0.89 by SVM and MVRA, respectively, whereas the MAE was 0.29 and 1.07 by SVM and MVRA, respectively.  相似文献   

15.
New empirical models were developed to predict the soil deformation moduli using gene expression programming (GEP). The principal soil deformation parameters formulated were secant (Es) and reloading (Er) moduli. The proposed models relate Es and Er obtained from plate load-settlement curves to the basic soil physical properties. The best GEP models were selected after developing and controlling several models with different combinations of the influencing parameters. The experimental database used for developing the models was established upon a series of plate load tests conducted on different soil types at depths of 1–24 m. To verify the applicability of the derived models, they were employed to estimate the soil moduli of a part of test results that were not included in the analysis. The external validation of the models was further verified using several statistical criteria recommended by researchers. A sensitivity analysis was carried out to determine the contributions of the parameters affecting Es and Er. The proposed models give precise estimates of the soil deformation moduli. The Es prediction model provides considerably better results in comparison with the model developed for Er. The simplified formulation for Es significantly outperforms the empirical equations found in the literature. The derived models can reliably be employed for pre-design purposes.  相似文献   

16.
The present paper mainly deals with the prediction of maximum explosive charge used per delay (Q MAX) using an artificial neural network (ANN) incorporating peak particle velocity (PPV) and distance between blast face to monitoring point (D). One hundred and fifty blast vibration data sets were monitored at different vulnerable and strategic locations in and around major coal producing opencast coal mines in India. One hundred and twenty-four blast vibrations records were used for the training of the ANN model vis-à-vis to determine site constants of various conventional vibration predictors. The other 26 new randomly selected data sets were used to test, evaluate and compare the ANN prediction results with widely used conventional predictors. Results were compared based on coefficient of correlation (R), mean absolute error and mean squared between measured and predicted values of Q MAX. It was found that coefficient of correlation between measured and predicted Q MAX by ANN was 0.985, whereas it ranged from 0.316 to 0.762 by different conventional predictor equations. Mean absolute error and mean squared error was also very small by ANN, whereas it was very high for different conventional predictor equations.  相似文献   

17.
This study addresses the effects of rock characteristics and blasting design parameters on blast-induced vibrations in the Kangal open-pit coal mine, the Tülü open-pit boron mine, the K?rka open-pit boron mine, and the TKI Çan coal mine fields. Distance (m, R) and maximum charge per delay (kg, W), stemming (m, SB), burden (m, B), and S-wave velocities (m/s, Vs) obtained from in situ field measurements have been chosen as input parameters for the adaptive neuro-fuzzy inference system (ANFIS)-based model in order to predict the peak particle velocity values. In the ANFIS model, 521 blasting data sets obtained from four fields have been used (r 2 = 0.57–0.81). The coefficient of ANFIS model is higher than those of the empirical equation (r 2 = 1). These results show that the ANFIS model to predict PPV values has a considerable advantage when compared with the other prediction models.  相似文献   

18.
The undrained shear strength (s u) of cohesive soils is a crucial parameter for many geotechnical engineering applications. Due to the complexities and uncertainties associated with laboratory and in situ tests, it is a challenging task to obtain the undrained shear strength in a reliable and economical manner. In this study, a probabilistic model for the s u of moderately overconsolidated clays is developed using the Bayesian model class selection approach. The model is based on a comprehensive geotechnical database compiled for this study with field measurements of field vane strength (s u), plastic limit (PL), natural water content (W n), liquid limit (LL), vertical effective overburden stress (\(\sigma_{\nu }^{\prime }\)), preconsolidation pressure (\(\sigma_{\text{p}}^{\prime }\)) and overconsolidated ratio (OCR). Comparison study shows that the proposed model is superior to some well-known empirical relationships for OC clays. The proposed probabilistic model not only provides reliable and economical estimation of s u but also facilitates reliability-based analysis and design for performance-based engineering applications.  相似文献   

19.
The main objective in production blasting is to achieve a proper fragmentation. In this paper, rock fragmentation the Sarcheshmeh copper mine has been predicted by developing a model using artificial neural network. To construct the model, parameters such as burden to spacing ratio, hole-diameter, stemming, total charge-per-delay and point load index have been considered as input parameters. A model with architecture 9-8-5-1 trained by back propagation method was found to be optimum. To compare performance of the neural network, statistical method was also applied. Determination coefficient (R 2) and root mean square error were calculated for both the models, which show absolute superiority of neural network over traditional statistical method.  相似文献   

20.
The determination of the compaction parameters such as optimum water content (wopt) and maximum dry unit weight (γdmax) requires great efforts by applying the compaction testing procedure which is also time consuming and needs significant amount of work. Therefore, it seems more reasonable to use the indirect methods for estimating the compaction parameters. In recent years, the artificial neural network (ANN) modelling has gained an increasing interest and is also acquiring more popularity in geotechnical engineering applications. This study deals with the estimation of the compaction parameters for fine‐grained soils based on compaction energy using ANN with the feed‐forward back‐propagation algorithm. In this study, the data including the results of the consistency tests, standard and modified Proctor tests, are collected from the literature and used in the analyses. The optimum structure of a network is determined for each ANN models. The analyses showed that the ANN models give quite reliable estimations in comparison with regression methods, thus they can be used as a reliable tool for the prediction of wopt and γdmax. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号