首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The Tower Hill gold deposit is distinguished from most Archaean lode deposits of the Yilgarn Craton by virtue of its formation early in the regional deformation history and its consequent deformation. The deposit is located in ultramafic schist, adjacent to the contact with a small pluton of biotite monzogranite that intrudes pervasively foliated granodiorite, the dominant component of the Raeside Batholith. Gold, accompanied by local concentrations of bismuth minerals and molybdenite, occurs in a number of quartz vein ‘packages‘. Mineralised quartz veins at Tower Hill lie within an envelope of potassic alteration (talc‐biotite‐chlorite‐pyrite schist), up to several hundred metres wide. They are spatially and temporally associated with the biotite monzogranite and felsic porphyry intrusions, and their deformed equivalents. The deposit lies in a broad zone of ductile deformation (the Sons of Gwalia Shear Zone). Within the altered ultramafic schist, thin units of felsic schist, derived from biotite monzogranite and felsic porphyry, provided sites of contrasting competency that localised quartz vein formation. The mineralised quartz veins were subsequently deformed during alternating periods of shortening and extension, probably related to the syntectonic, solid‐state emplacement of the Raeside Batholith. These deformations pre‐dated strike‐slip movement on the Cemetery Fault, which truncates the ductile fabrics of the Sons of Gwalia Shear Zone, south of Tower Hill. In terms of the regional deformation history, gold mineralisation at Tower Hill formed during early D2 (regional upright folding); subsequent deformation of the orebody pre‐dated D3 (strike‐slip movement on the Cemetery Fault). The nearby Sons of Gwalia and Harbour Lights deposits also probably formed at an early stage, in contrast to most lode gold deposits in the Yilgarn Craton, which formed during or after D3.  相似文献   

2.
Although many Archaean greenstone-hosted mesothermal gold deposits are in steep, reverse-motion fault zones, other fault geometries are prospective for mineralization. Harbour Lights is one of a number of deposits at Leonora hosted in a normal-motion shear zone, probably related to movement off the adjacent domal granitoid. The deposit is also atypical in that mineralization predates the last deformation to affect the mine sequence, but formed by similar processes to other mesothermal deposits in all respects other than the detail of shear zone geometry, kinematics and timing. Gold mineralization at Harbour Lights is related to D1 quartz veins parallel to a well-developed gently NE- to E-dipping D1 cleavage, both of which are deformed in steeply dipping and later extensional shear bands (D2). Gently dipping quartz veins, as at Harbour Lights, must have formed at extremely high fluid pressures, capable of holding the weight of the overlying crust. In the gently dipping normal-motion shear zone continued reactivation and veining was possible only with extremely high fluid pressures, and steeply dipping structures, such as the D2 extensional shear bands, were initiated as the fluid pressure dropped after the mineralizing event. The rarity of gold mineralization hosted in normal-motion shear zones is due to their being linked to steep structures which pump fluid upwards and prevents the build-up of extremely high fluid pressures. At Harbour Lights it appears that these links were (atypically) absent, probably because deformation was a result of granitoid doming, and was subparallel to strata.  相似文献   

3.
Gold deposits in the Agnew district display markedly different structural styles. The Waroonga and Songvang deposits are hosted in layer-parallel extensional shears formed under highly ductile conditions. In contrast, the New Holland–Genesis deposits are shallow-dipping quartz-filled brittle fractures and breccia zones that cut across the tightly folded bedding and formed during east–west compression. It is difficult to attribute their formation to a single compressive event. The Waroonga and Songvang deposits formed during D1 extension, uplift and exhumation of the Agnew granitic complex and formation of the Scotty Creek Basin at ca 2670–2660?Ma. The New Holland–Genesis deposits formed during east–west D3 compression at about ca 2650–2630?Ma. An S1 foliation wraps around the Agnew granitic complex and L1 stretching lineations form a radial pattern around the granite, consistent with formation during D1 uplift of the composite granite body. Uplift and erosion of granite bodies in the surrounding area provide a source for the granite clasts in the upper parts of the Scotty Creek Basin. As clasts in the basin are undeformed, no significant deformation occurred prior to the uplift and erosion of the source granites in this area. Syn-tectonic emplacement of the Lawlers Tonalite during formation of the Scotty Creek Basin at ca 2665?Ma may have provided a good heat/fluid source for the mineralising systems during the first gold event. The distribution of the large deposits along the western edge of the Agnew granitic complex indicates that the extensional shear along the granite contact is a first-order control on gold deposition by providing a conduit for rising hydrothermal fluids. The northerly trend of high-grade shoots in the Waroonga deposit coincides with early north-trending growth faults, which are also likely fluid conduits.  相似文献   

4.
The Laowan metallogenic belt in China is an important metallogenic belt within the Tongbai orogenic belt, and contains the medium-sized Laowan and Shangshanghe gold deposits, the small Huangzhuyuan lead–zinc–silver–gold deposit and some gold and Cu–Pb occurrences. These deposits are hosted in Mesoproterozoic plagioclase amphibolite (or schist) and mica-quartz schist. The gold ores are mainly quartz veins and veinlets and disseminated altered ores. Subordinate ore types include massive sulfides and breccias. The Laowan gold deposit is characterized by three right-stepping en-echelon fracture-controlled alteration zones that dip gently to the south and includes disseminated, sheeted and stockwork ores. These lodes were formed by the interaction of ore-forming fluid with foliated-to laminated cataclasite within the transpressional faults. The Shangshanghe gold deposit is characterized by parallel ore lodes that dip steeply to the north, and includes quartz veins and breccias in addition to ores in altered wallrocks. These lodes were formed by focusing of fluids into transtensional faults. These ore controlling faults displaced early barren quartz veins 10 m horizontally with a dextral sense of motion. The ore-hosting structures at the Laowan and Shangshanghe deposits correspond to the P and R-type shears of a brittle dextral strike-slip fault system, respectively, which make angles of about 15° and − 15° to the Laowan and Songpa boundary faults. The ore-controlling fault system post-dated formation of a ductile shear zone, and peak regional metamorphism. This precludes a genetic relationship between hydrothermal mineralization and regional metamorphism and ductile shear deformation. These gold deposits are not typical orogenic gold deposits. The metallogenic belt displays district-scale-zoning of Mo → Cu–Pb–Zn–Ag → Au relative to Songpa granite porphyry dike zone, suggesting the mineralization may be closely related to the granite porphyry. Measured δ34S of sulfides and δ18O and δD of fluid inclusion waters in auriferous quartz also are consistent with a magmatic source for sulfur and ore fluids. The similarity of Pb isotope ratios between the ores and Yanshanian granitoids suggests a similar source. As the age (139 ± 3 Ma) of granite porphyry obtained by zircon U–Pb isotope overlaps the mineralization age (138 ± 1 Ma: Zhang et al., 2008a), the gold and polymetallic metallogenesis of the Laowan gold belt has close spatial, temporal and possibly genetic relationships with Yanshanian high level magmatism.  相似文献   

5.
Carbonate alteration at the Mulgarrie gold mine in the Eastern Goldfields of Western Australia, is represented by porphyroblasts, veins and pervasive, texturally destructive, carbonatisation. Two foliations, S1M and S2M, were produced by two separate deformation events at the mine‐scale, D1M and D2M. D1M and D2M both occurred in response to regional D2 tectonism. Carbonate alteration was the product of two separate episodes of fluid ingress: the earlier produced magnesite and the latter Fe‐dolomite. Both periods of carbonate alteration occurred pre‐ to early syn‐D2M, when mafic to ultramafic komatiitic rocks reacted with fluids that moved along regional faults and pre‐date the alteration associated with regional peak metamorphism. Gold at Mulgarrie overprints pre‐ and late syn‐D2 quartz veins in zones of massive carbonate alteration, suggesting it has a late‐ to post‐D2 timing. This late timing agrees with the generally accepted syn‐D3 (and younger) age for gold mineralisation in the Eastern Goldfields. We suggest that carbonate alteration at Mulgarrie is not a product of the hydrothermal event responsible for the gold mineralisation. Rather, the different relative timing of magnesite, Fe‐dolomite and gold indicates there were two carbonate‐producing fluid systems and a fluid transporting the gold overprinted these. Similarly, early carbonate alteration may play a role in localising auriferous vein deposits throughout the Yilgarn and other Archaean cratons.  相似文献   

6.
The Golden Mile deposit was discovered in 1893 and represents today the largest Archaean orogenic lode gold system in the world (50 M oz produced gold). The Golden Mile deposit comprises three major styles of gold mineralisation: Fimiston, Oroya and Charlotte styles. Fimiston-style lodes formed at 250 to 350 °C and 100 to 200 MPa and are controlled by brittle–ductile fault zones, their subsidiary fault zone and vein networks including breccias and open-cavity-infill textures and hydrothermally altered wall rock. Fimiston lodes were formed late D1, prior to D2 regional upright folding. Hydrothermal alteration haloes comprise a progression toward the lode of diminishing chlorite, an increase in sericite and in Fe content of carbonates. Lodes contain siderite, pyrite, native gold, 17 different telluride minerals (Au–Ag tellurides contain ~25% of total gold), tourmaline, haematite, sericite and V-rich muscovite. Oroya-style lodes formed at similar P–T conditions as the Fimiston lodes and are controlled by brittle–ductile shear zones, associated dilational jogs that are particularly well developed at the contact between Paringa Basalt and black shale interflow sedimentary rocks and altered wall rock. The orebodies are characterised by micro-breccias and zones of intense shear zone foliation, very high gold grades (up to 100,000 g/t Au) and the common association of tellurides and vanadian mica (green leader). Oroya lodes crosscut Fimiston lodes and are interpreted to have formed slightly later than Fimiston lodes as part of one evolving hydrothermal system spanning D1 and D2 deformation (ca. 2,675–2,660 Ma). Charlotte-style lodes, exemplified by the Mt Charlotte deposit, are controlled by a sheeted vein (stockwork) complex of north-dipping quartz veins and hydrothermally altered wall rock. The Mt Charlotte orebody formed at 120 to 440 °C and 150 to 250 MPa during movement along closely spaced D4 (2,625 Ma) and reactivated D2 faults with the quartz granophyre in the Golden Mile Dolerite exerting a strong lithological control on gold mineralisation. Veins consist of quartz–carbonate–minor scheelite, and wall-rock alteration comprises chlorite destruction and growth of ferroan carbonate–sericite–pyrite–native gold. Pyrite–pyrrhotite is zoned on the scale of vein haloes and of the entire mine, giving a vertical temperature gradient of 50–100 °C over 1,000 vertical metres. The structural–hydrothermal model proposed consists of four major stages: (1) D1 thrusting and formation of Fimiston-style lodes, (2) D2 reverse faulting and formation of Oroya-style lodes, (3) D3 faulting and dissecting of Fimiston- and Oroya-style lodes, and (4) D4 faulting and formation of Mt Charlotte-style sheeted quartz vein system. The giant accumulation of gold in the Golden Mile deposit was formed due to protracted gold mineralisation throughout episodes of an Archaean orogeny that spanned about 45 Ma. Fluid conduits formed early in the tectonic history and persisted throughout orogenesis with the plumbing system showing a rare high degree of focussing, efficiency and duration. In addition to the long-lasting fluid plumbing system, the wide variety of transient structural and geochemical traps, multiple fluid sources and precipitation mechanism contributed towards the richest golden mile in the world.Editorial handling: B. Lehmann  相似文献   

7.
The Hodgkinson Province is a tract of␣multiply deformed Silurian-Devonian rocks in north␣Queensland, Australia. Gold-bearing quartz veins from the West Normanby Goldfield in the northern Hodgkinson Province were emplaced during the Permian D4 event, broadly coeval with regional granite emplacement. Taylors Fault, a major structure that formed during D2, hosts the veins which infill dilatational jogs opened during sinistral-normal reactivation of the fault in D4. Veins contain graphitic laminations that formed when fault planes segmented wallrocks adjacent to the veins, producing tabular clasts that were tectonically sliced into the reefs. Laminations are the result of progressive shear strain, associated with continued movement on the faults, which caused strain-enhanced dissolution of silicate minerals and residual graphite enrichment in the clasts. This process produced graphite-coated shear planes that delimit zones of grain size reduction in the veins. Laminations commonly contain stylolites, which nucleated on pronounced sinuosities of the shear planes due to progressive shortening during D4. Gold particles have preferentially nucleated in zones of relatively coarser-grained quartz adjacent to the shear planes, where shortening strain caused microfracturing and allowed fluid access. Gold may have been introduced with the quartz, but was redistributed within the reefs and localized along the laminations by the effects of synchronous, progressive deformation. Regionally, gold deposits show close spatial relationships with granite plutons of the Permian Whypalla Supersuite. Relationships in the West Normanby Gold Field support a regional model of reef emplacement and gold mineralization during the Permian D4 event. Received: 24 August 1997 / Accepted: 14 October 1997  相似文献   

8.
Gold mineralisation in classic Australian slate belt gold deposits at Ballarat, Bendigo, St. Arnaud and Inglewood occurred very late in the orogenic history of these rocks rather than during formation of the main slaty cleavage. This has been revealed through the examination of microstructural relationships in gold-bearing quartz veins and their host rocks from these deposits, which has established a D1 to D4 deformation-stage history and consistent timing for gold mineralisation over a wide area. The gold was deposited synorogenically but during the fourth deformation stage (D4) of the orogeny, a relatively weak event occurring two deformations after the main slaty cleavage producing event, D2. Previously, D2 had been regarded as both the source and control of gold mineralisation as most of the quartz veins that occur in these deposits formed before or during this deformation event. However, most gold is hosted in breccia veins that formed during D4. The wallrock clasts within these breccia veins contain a young rotated foliation and the breccia veins are spatially associated with a paragenetically consistent alteration of the host rocks in the deposits. This alteration both crosscuts and preferentially mineralises wallrock S4 allowing the timing of the breccia veins, alteration and gold deposition to be defined as syn-D4 in age.  相似文献   

9.
Establishing relative and absolute time frameworks for the sedimentary, magmatic, tectonic and gold mineralisation events in the Norseman-Wiluna Belt of the Archean Yilgarn Craton of Western Australia, has long been the main aim of research efforts. Recently published constraints on the timing of sedimentation and absolute granite ages have emphasized the shortcomings of the established rationale used for interpreting the timing of deformation events. In this paper the assumptions underlying this rationale are scrutinized, and it is shown that they are the source of significant misinterpretations. A revised time chart for the deformation events of the belt is established. The first shortening phase to affect the belt, D1, was preceded by an extensional event D1e and accompanied by a change from volcanic-dominated to plutonic-dominated magmatism at approximately 2685–2675 Ma. Later extension (D2e) controlled deposition of the ca 2655 Ma Kurrawang Sequence and was followed by D2, a major shortening event, which folded this sequence. D2 must therefore have started after 2655 Ma—at least 20 Ma later than previously thought and after the voluminous 2670–2655 Ma high-Ca granite intrusion. Younger transcurrent deformation, D3–D4, waned at around 2630 Ma, suggesting that the crustal shortening deformation cycle D2–D4 lasted approximately 20–30 Ma, contemporaneous with low-volume 2650–2630 Ma low-Ca granites and alkaline intrusions. Time constraints on gold deposits suggest a late mineralisation event between 2640–2630 Ma. Thus, D2–D4 deformation cycle and late felsic magmatism define a 20–30 Ma long tectonothermal event, which culminated with gold mineralisation. The finding that D2 folding took place after voluminous high-Ca granite intrusion led to research into the role of competent bodies during folding by means of numerical models. Results suggest that buoyancy-driven doming of pre-tectonic competent bodies trigger growth of antiforms, whereas non-buoyant, competent granite bodies trigger growth of synforms. The conspicuous presence of pre-folding granites in the cores of anticlines may be a result from active buoyancy doming during folding.  相似文献   

10.
Significant gold deposits in the western Tanami region of Western Australia include deposits in the Bald Hill and Coyote areas. The ca. 1,864 Ma Bald Hill sequence of turbiditic and mafic volcanic rocks hosts the Kookaburra and Sandpiper deposits and a number of smaller prospects. The ca. 1,835 Ma turbiditic Killi Killi Formation hosts the Coyote deposit and several nearby prospects. The Kookaburra deposit forms as a saddle reef within a syncline, and the Sandpiper deposit is localized within graphitic metasedimentary rocks along a limb of an anticline. Gold in these deposits is hosted by anastomosing quartz–(–pyrite–arsenopyrite) veins within quartz–sericite schist with disseminated arsenopyrite, pyrite, and marcasite (after pyrrhotite). Based on relative timing relationships with structural elements, the auriferous veins are interpreted to have been emplaced before or during the ca. 1,835–1,825 Ma Tanami Orogeny (regional D1). Gold deposition is thought to have been caused by pressure drops associated with saddle reef formation (Kookaburra) and chemical reactions with graphitic rocks (Sandpiper). The Coyote deposit, the largest in the western Tanami region, consists of a number of ore lenses localized along the limbs of the Coyote Anticline, which formed during the Tanami Orogeny. The largest lenses are associated with the Gonzalez Fault, which is located along the steeply dipping southern limb of this fold. Gold was introduced at ca. 1,790 Ma into dilatant zones that formed in local perturbations along this fault during later reactivation (regional D5) towards the end of a period of granite emplacement. Gold is associated with quartz–chlorite–pyrite–(arsenopyrite–galena–sphalerite) veins with narrow (<?5 mm) chloritic selvages. A quartz–muscovite–biotite–K–feldspar–(tourmaline–actinolite–arsenopyrite) assemblage, which is interpreted to relate to granite emplacement, overprints the regional greenschist facies metamorphic assemblage. The mineralogical similarity between this overprinting assemblage and the vein assemblage suggests that the auriferous veins at the Coyote deposit are associated with the granite-related metamorphic–metasomatic assemblage. Gold deposition is thought to have been caused by pressure drops within dilatant zones.  相似文献   

11.
Granite plutons of the Whypalla Supersuite in the Butchers Hill — Helenvale region of north Queensland were intruded into the upper crust of the Hodgkinson Formation during contractional deformation associated with the Permian‐Triassic Hunter‐Bowen Orogeny. A four‐stage structural history has been resolved for the area, with fabric overprinting relationships, porphyroblast‐matrix microstructural geometries and isotopic ages being consistent with granite emplacement during D4 shortening at ca 274 Ma. Microstructural relationships suggest the possibility of a minor syn‐D3 phase of granite emplacement. The deformation‐emplacement history of the Butchers Hill — Helenvale area is consistent with that recognised regionally for the Hodgkinson Province, indicating province‐wide synchronous syntectonic granite intrusion during a major phase of contractional deformation. Intense syn‐emplacement deformation partitioning was ongoing in the country rocks during progressive D4 and was associated with upward translation of country rock from the microscale to the macroscale along D4 cleavages and shears. Kinematic indicators show that this progressive uplift, at the scale of the area examined, was east‐side‐up.  相似文献   

12.
Quartz-carbonate gold deposits were emplaced in shear zones at or above the brittle-ductile transition. Some of the largest deposits are known to have formed along major, long-lived, transcurrent shears. Shears of this type widened downwards in the ductile regime, as a result of decreasing rock viscosity with depth; some were as wide as 40 km at depths of granulite facies metamorphism. Ductile shears are permeable and, since the permeability is along microfractures, fluid flow was pervasive, providing the opportunity for extensive chemical reaction. Reaction rates were enhanced by shear heating and by deformation-induced stress gradients in minerals, and reductions in grain size. Fluid flow tended to be upwards, because of pressure drop into the brittle portion of the shear. Given the wedge-shaped profile of ductile shears, fluids that had passed through a large volume of lower crust would have been focused at the brittle-ductile transition. Thus, if processes existed to selectively remove elements during fluid movement through the lower crust, these elements would also have been focused at this transition.One of the most constant features of quartz-carbonate lodes is carbonate alteration, which may extend kilometers out from major deposits. The 13C signature of this is consistent with a mantle source for the CO2. Upward-moving CO2 vapour of probable mantle origin has been implicated in the dehydration of amphibolite facies rocks to granulites and the concomitant depletion of large ion lithophile elements (LILE). The best documented cases of modification of the lower crust by CO2 are from major shear zones. CO2 streaming at depth could only have occurred under conditions more oxidizing than that required for graphite stability. These conditions favour solubility of gold by (a) oxidizing Au0 to Au+; (b) by dissolving sulphide from the rocks to complex with Au+. Recent work has shown that some major Archean gold deposits were derived from relatively oxidized fluids.A conceptual model is outlined for the genesis of at least some quartz-carbonate gold deposits. CO2 permeating deep ductile shear zones dehydrated amphibolite facies rocks. A relatively oxidized CO2-H2O fluid was produced, which dissolved sulphide and gold from large volumes of lower crust. Gold was carried upwards in the narrowing shear, to be focused and precipitated at or above the brittle-ductile transition.  相似文献   

13.
New data suggest syn-convergent extrusion and polyphase tectonics followed by late Variscan extension in the Strudengau area of the southern Moldanubian zone in Austria. The tectonic history can be summarized as follows: (1) The oldest ductile event is observed in HT/LP metamorphic pelitic gneisses, which preserve E-dipping foliation planes (D1-fabric) with NW–SE-trending lineations. (2) The overlying gneisses record HT/HP conditions with decompression-induced anatexis in the central part of the domain. These gneisses exhibit N–S trending, horizontal lineations along steep-dipping foliation planes (D2-fabric) crosscutting the D1-fabric of the pelitic gneisses. Along the margin, these rocks have been strongly mylonitized under amphibolite facies conditions (D2). D2 is interpreted as a significant vertical shear zone, which juxtaposes the HT/LP rocks against the orogenic lower crust. (3) Lastly, the whole area is overprinted by localized shear zones (D3-fabric) with top-to-the-NW kinematics. This newly discovered Strudengau shearing event is associated with isoclinal folding that possesses axial planes parallel to the mylonitic foliation and fold axes parallel to the stretching lineations. Initial mylonitization occurred under greenschist facies, representing the latest ductile event of the Strudengau area. The new geochronological data presented here indicate a narrow time frame (c. 323–318 Ma) for the D3 deformation. Therefore, this event is contemporaneous with the intrusion of the granites of the South Bohemian Batholith (330–310 Ma). The nearby South Bohemian Batholith and generally steep dyke swarms in the Strudengau area and to the north trend in a NE–SW preferred orientation, interpreted to be D3-synkinematic magmatism. In a regional context, the NW–SE stretching during D3 together with the synkinematic intrusion of dykes is associated with late orogenic extension in the Austrian Moldanubian Zone. Kinematic data of brittle normal faults and tension gashes are consistent with NW–SE-oriented extension under cooler conditions.  相似文献   

14.
The Cooma Complex of the Lachlan Fold Belt, south‐eastern Australia, is characterised by a large (c. 10 km wide) low‐P, high‐T metamorphic aureole surrounding a small (3 × 6 km) granite pluton. The aureole extends northward to envelop the eastern lobe of the Murrumbidgee Batholith and progressively narrows to a kilometre wide hornfelsic aureole some 50 km north of Cooma. At its northern extremity, the batholith has intruded its own volcanic cover. These regional relations suggest that the Murrumbidgee Batholith is gently tilted to the north, with the Cooma Complex representing the aureole beneath the batholith. Two main deformation events, D3 and D5, affected the aureole. The inner, high‐grade migmatitic domain contains upright F5 folds defined by a composite, transposed S3/S0 fabric and S3/S0 concordant leucosomes. The folded stromatic migmatites define the western limb of a F5 synform, with its axis located in the batholith. Lenses and sheets of the Murrumbidgee Batholith intruded along S3 but also preserve S3 as a strong, solid‐state foliation. S3 and the granite sheets but are also folded by F5, outlining a fanning positive flower structure. These relations indicate that most of the batholith was emplaced before and during D3, but intrusion persisted until early syn‐D5. Formation of the Cooma Granodiorite occurred post‐D3 to early syn‐D5, after formation of the wide metamorphic aureole during early syn‐D3 to early syn‐D5. The Murrumbidgee Batholith was emplaced between pre‐D3 to early syn‐D5, synchronous with the formation of the Cooma Complex. The structural and metamorphic relations indicate that the Murrumbidgee Batholith was the ultimate heat source responsible for the Cooma Metamorphic Complex. D3 structures and metamorphic isograds are subparallel to the batholith margin for over 50 km. This concordance probably extends vertically, suggesting that the isograds also fan outward from the batholith margin. This implies an inverted metamorphic sequence focused on the Murrumbidgee Batholith, although the base has been almost completely removed by erosion in the Cooma Complex. The field evidence at Cooma, combined with previous thermal modelling results, suggest that extensive LPHT metamorphic terranes may represent regional metamorphic aureoles developed beneath high‐level granitic batholiths.  相似文献   

15.
Gold deposits in the Syama and Tabakoroni goldfields in southern Mali occur along a north-northeast trending mineralised litho-structural corridor that trends for approximately 40 km. The deposits are interpreted to have formed during a craton-wide metallogenic event during the Eburnean orogeny. In the Syama goldfield, gold mineralisation in 9 deposits is hosted in the hanging-wall of the Syama-Bananso Shear Zone in basalt, greywacke, argillite, lamprophyre, and black shale. Gold is currently mined primarily from the oxidised-weathered zone of the ore bodies. In the Syama deposit, mineralisation hosted in altered basalt is associated with an intense ankerite–quartz–pyrite stockwork vein systems, whereas disseminated style mineralisation is also present in greywackes. In contrast, the Tellem deposit is hosted in quartz–porphyry rocks.In the Tabakoroni goldfield, gold mineralisation is hosted in quartz veins in tertiary splay shears of the Syama-Bananso Shear Zone. The Tabakoroni orebody is associated with quartz, carbonate and graphite (stylolite) veins, with pyrite and lesser amounts of arsenopyrite. There are four main styles of gold mineralisation including silica-sulphide lodes in carbonaceous fault zones, stylolitic quartz reefs in fault zones, quartz–Fe–carbonate–sulphide lodes in mafic volcanics, and quartz–sulphide stockwork veins in silicified sediments and porphyry dykes. The several deposit styles in the goldfield thus present a number of potential exploration targets spatially associated with the regional Syama-Bananso Shear Zone and generally classified as orogenic shear-hosted gold deposits.  相似文献   

16.
The Hutti gold mine is located in a high-angle, NNW–SSE-trending shear zone system, which hosts nine discrete auriferous shear zones (reefs). On a clockwise, retrograde PT path two separate stages of deformation/metamorphism (D2/M2 and D3/M3) occurred synchronous with two distinct stages of gold mineralization, both of which were associated with different fluid types. Stage 1 mineralization developed during D2/M2, where the amphibolite host rocks were altered by a metamorphic fluid with a $ {{\delta }^{{18}}}{{O}_{{{{H}_2}O}}} $ of 7.5–10.1?‰, rich in K, S, As, and Au at pressure and temperature conditions of around 3 kbar and 530?+?20/?30°C, respectively. The stage 1 auriferous shear zones are enveloped by a zoned alteration consisting of a distal biotite–chlorite and proximal biotite–plagioclase assemblage. Subsequently, D2/M2 was overprinted by D3/M3 deformation and metamorphism at 300–400°C and <2 kbar that formed the stage 2 mineralization. The stage 2 mineralizing fluid which originated from outside the greenstone belt (δ18Ofluid of 3.2–6.8?‰) was rich in Si, Au, and W. This mineralization stage is distinct by the emplacement of laminated quartz veins central to the shear zone, containing locally visible gold at concentrations of up to 1 kg Au/t. The laminated quartz veins are surrounded by a millimeter-scale chlorite2–K-feldspar alteration halo, which replaced the stage 1 biotite–plagioclase assemblage. The oxygen isotopic composition of the stage 2 fluid suggests a mixture of a magmatic fluid with an oxygen isotopic composition in the range of 6 to 10?‰ and an isotopically light formation fluid that resulted from fluid–rock interaction in the greenstone pile. The two fluid fluxes at stages 1 and 2 both contributed to the overall gold mineralization; however, it was the second fluid pulse, which gave the Hutti mine its status as the largest gold mine in India. The metamorphic evolution was thereby important for the first stage, whereas the second stage was controlled by tectonism and intrusion of the high-heat production Yellagatti granite that re-established the fluid plumbing and mineralizing system.  相似文献   

17.
《Gondwana Research》2014,26(4):1469-1483
China's largest gold resource is located in the highly endowed northwestern part of the Jiaodong gold province. Most gold deposits in this area are associated with the NE- to NNE-trending shear zones on the margins of the 130–126 Ma Guojialing granite. These deposits collectively formed at ca. 120 ± 5 Ma during rapid uplift of the granite. The Dayingezhuang deposit is a large (> 120 t Au) orogenic gold deposit in the same area, but located along the eastern margin of the Late Jurassic Linglong Metamorphic Core Complex. New 40Ar/39Ar geochronology on hydrothermal sericite and muscovite from the Dayingezhuang deposit indicate the gold event is related to evolution of the core complex at 130 ± 4 Ma and is the earliest important gold event that is well-documented in the province. The Dayingezhuang deposit occurs along the Linglong detachment fault, which defines the eastern edge of the ca. 160–150 Ma Linglong granite–granodiorite massif. The anatectic rocks of the massif were rapidly uplifted, at rates of at least 1 km/m.y. from depths of 25–30 km, to form the metamorphic core complex. The detachment fault, with Precambrian metamorphic basement rocks in the hangingwall and the Linglong granitoids and migmatites in the footwall, is characterized by early mylonitization and a local brittle overprinting in the footwall. Gold is associated with quartz–sericite–pyrite–K-feldspar altered footwall cataclasites at the southernmost area of the brittle deformation along the detachment fault. Our results indicate that there were two successive, yet distinct gold-forming tectonic episodes in northwestern Jiaodong. One event first reactivated the detachment fault along the edge of the Linglong massif between 134 and 126 Ma, and then a second reactivated the shears along the margins of the Guojialing granite. Both events may relate to a component of northwest compression after a middle Early Cretaceous shift from regional NW–SE extension to a NE–SW extensional regime.  相似文献   

18.
云南大坪金矿床是哀牢山金矿带中最重要的金矿之一,主要赋存在受到强烈剪切和水-岩反应的闪长岩中,是典型的喜马拉雅期造山型金矿。本文对大坪金矿床赋矿闪长岩中锆石进行了SHRIMP U-Pb定年,得出闪长岩围岩的年龄为773±12Ma,为晚元古代,显示该岩体为华南地区晋宁-澄江期大规模基性到酸性岩浆活动的产物,是Rodinia 超大陆形成、裂解后冈瓦纳大陆形成过程的响应,而不是前人普遍认为的加里东期岩体。该岩体侵入年龄与大坪金矿脉石英流体包裹体40Ar-39Ar 年龄测定给出的高温坪年龄(765.5±7.0Ma)基本一致,显示大坪金矿床具有多期成矿的特征,其主体形成于喜马拉雅期碰撞造山运动,但早在晋宁造山运动中就有金的初步富集。在闪长岩中还发现了年龄为33.7±1.1Ma的锆石,其时代与大坪金矿床含金石英脉中热液绢云母的40Ar-39Ar定年结果(33.76Ma)基本一致,显示它们很可能为该区强烈的韧性剪切和局部岩浆部分熔融作用的产物。  相似文献   

19.
The Archaean lode gold deposits in the Mt. York District, Pilbara Block, Western Australia are hosted in banded iron formation (Main Hill/Breccia Hill prospect) of the ca. 3.33 Ga Gorge Creek Group and in amphibolites (Zakanaka prospect) of the ca. 3.46 Ga Warrawoona Group. Gold mineralisation at the Main Hill/Breccia Hill prospect is associated with breccias comprising quartz clasts in a quartz-pyrrhotite matrix, and quartz-amphibole veins, with löllingite being the major host for gold. Minimum temperatures for gold mineralisation at the prospect are constrained as 455°C to 550°C by arsenopyrite thermometry. Gold mineralisation at the Zakanaka prospect is spatially associated with quartzclinopyroxene-calcite-microcline-calcic-amphibole veins and biotite altered wallrock adjacent to the veins. Temperatures for vein emplacement are estimated as 480°C to 570°C using both plagioclase-amphibole thermometry and mineral equilibria with respect to T and XCO2. The timing of gold mineralisation relative to the peak of metamorphism is constrained by mineral textures and the relative temperatures of hydrothermal alteration and metamorphism. Gold mineralisation at both deposits was broadly synchronous with the peak of regional amphibolite facies metamorphism, which reached temperatures of 520°C to 640°C based on amphibole-plagioclase and garnet-biotite thermometry. In this respect, the deposits are similar to other well documented syn-amphibolite facies lode gold deposits from the Archaean Southern Cross greenstone belt in the Yilgarn Block, and represent the deeper section of a crustal continuum of lode gold deposits that includes mesothermal deposits such as those at Kalgoorlie at higher crustal levels.  相似文献   

20.
Calculations based on the available thermodynamic data of AuCl 2 − and Au (HS) 2 − indicate that AuCl 2 − is responsible for the transport and enrichment of gold during the stage of pre-concentration in the source bed while Au (HS) 2 − is the main gold species involved in the formation of gold deposits in response to hydrothermal reworking. Acid chloride solutions witha Cl − > 10° and sulfur-rich solutions with aΣs in excess of 10−2 are held as important criteria for gold enrichment in the source bed and for the formation of gold deposits by subsequent hydrothermal event, respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号