首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 343 毫秒
1.
JACO H. BAAS 《Sedimentology》1994,41(2):185-209
An empirical model is constructed for the development and equilibrium dimensions of small scale, unidirectional bedforms in sand with a median grain size of 0·095 mm, based on a series of steady flow experiments in a flume. Current ripples always attain a linguoid plan morphology with constant average height (13·1 mm) and wavelength (115·7 mm), provided that sufficient time is allowed for their formation. The development pattern of these ripples on a flat bed is independent of flow velocity, and involves four stages: (1) incipient ripples; (2) straight and sinuous ripples; (3) non-equilibrium linguoid ripples, and (4) equilibrium linguoid ripples. Straight and sinuous ripples are non-equilibrium bedforms at all flow velocities. The time needed to reach equilibrium dimensions is related to the inverse power of flow velocity and ranges from several minutes to more than hundreds of hours. At flow velocities where washed ripples are stable, the equilibrium wavelength is similar to that of equilibrium linguoid ripples, but the equilibrium height rapidly decreases from 13·1 mm to zero towards upper stage plane bed conditions. The results of the flume experiments correspond reasonably well with those of previous studies, provided that various complicating factors, such as different experimental methods, different sediment characteristics, shallow flow depths and non-equilibrium runs, are accounted for.  相似文献   

2.
Jaco H. Baas 《Sedimentology》1999,46(1):123-138
A flume study on the development and equilibrium morphology of current ripples in fine sand (D50 = 0·238 mm) was performed to extend an empirical model for current ripple stability in 0·095 mm sand to larger grain sizes. The results of the flume experiments agree with the very fine sand model that current ripple development from a flat bed is largely independent of flow velocity. At all flow velocities, ripples evolve from incipient, through straight, sinuous and non-equilibrium linguoid, to equilibrium linguoid plan morphology. The time needed to achieve an equilibrium linguoid plan form is related to an inverse power of flow velocity and ranges from several minutes to more than hundreds of hours. Average equilibrium height and length are 17·0 mm and 141·1 mm respectively. These values are about 20% larger than in very fine sand. Equilibrium ripple height and length are proportional to flow velocity near the stability field of dunes. In the same velocity range, a characteristic grouping of ripples with smaller ripples migrating on the upstream face of larger ripples was observed. Bed-form development shows a conspicuous two-phase behaviour at flow velocities < 0·49 m s?1. In the first phase of development, ripple height and length increase along an exponential path, similar to that at higher flow velocities, thus reaching intermediate equilibrium values of 14·8 mm and 124·5 mm respectively. After some time, however, a second phase commences, that involves a rapid increase in bed-form size to the typical equilibrium values for 0·238 mm sand. A comparison with literature data shows that the results obtained for 0·238 mm sand agree reasonably well with other flume studies at similar grain size. Yet considerable variability in the relationships between ripple dimensions and flow strength ensues from, among others, underestimation of equilibrium time, shallow flow depths and differences in sediment texture.  相似文献   

3.
The development of bedforms under unidirectional, oscillatory and combined‐flows results from temporal changes in sediment transport, flow and morphological response. In such flows, the bedform characteristics (for example, height, wavelength and shape) change over time, from their initiation to equilibrium with the imposed conditions, even if the flow conditions remain unchanged. These variations in bedform morphology during development are reflected in the sedimentary structures preserved in the rock record. Hence, understanding the time and morphological development in which bedforms evolve to an equilibrium stage is critical for informed reconstruction of the ancient sedimentary record. This article presents results from a laboratory flume study on bedform development and equilibrium development time conducted under purely unidirectional, purely oscillatory and combined‐flow conditions, which aimed to test and extend an empirical model developed in past work solely for unidirectional ripples. The present results yield a unified model for bedform development and equilibrium under unidirectional, oscillatory and combined‐flows. The experimental results show that the processes of bedform genesis and growth are common to all types of flows, and can be characterized into four stages: (i) incipient bedforms; (ii) growing bedforms; (iii) stabilizing bedforms; and (iv) fully developed bedforms. Furthermore, the development path of bedform; growth exhibits the same general trend for different flow types (for example, unidirectional, oscillatory and combined‐flows), bedform size (for example, small versus large ripples), bedform shape (for example, symmetrical or rounded), bedform planform geometry (for example, two‐dimensional versus three‐dimensional), flow velocities and sediment grain sizes. The equilibrium time for a wide range of bed configurations was determined and found to be inversely proportional to the sediment transport flux occurring for that flow condition.  相似文献   

4.
  相似文献   

5.
Flume experiments show that current ripples on very fine sand surfaces always develop towards a linguoid shape with constant height and wavelength provided that sufficient time is allowed for their formation. Straight and sinuous current ripples only reflect intermediate stages in ripple development and may be regarded as non-equilibrium bedforms. The time period which current ripples require to reach linguoid equilibrium morphology is related to an inverse power of flow velocity. In the transitional stage from current ripples to upper stage plane bed (i.e. washed-out ripple stage) only the equilibrium wavelength remains constant, whereas equilibrium height rapidly decreases to zero. Our observations imply that bed-roughness parameters in sediment transport calculations can be simplified when equilibrium conditions are attained, and that inferences about flow energy from the dimensions of current ripples in very fine sand need to be regarded with caution.  相似文献   

6.
Current knowledge of flow and turbulent processes acting across the sand bed continuum is still unable to unequivocally explain the mechanism(s) by which ripples become dunes. Understanding has been improved by comparative high-resolution studies undertaken over fixed bedforms at different stages in the continuum. However, these studies both ignore the role of mobile sediment and do not examine flow structure during the actual transition from ripples to dunes. The aims of the paper are: (i) to describe flow and turbulence characteristics acting above mobile bedforms at several stages across the transition; and (ii) to compare these data with those arising from experiments over fixed ripples and dunes. Laboratory experiments are presented that examine the turbulence structure across seven distinct stages of the transition from ripples to dunes. Single-point acoustic Doppler velocimeter sampling at three flow heights above a developing mobile boundary was undertaken. Time-averaged statistics and the instantaneous quadrant record reveal distinct changes in flow structure either side of the change from ripples to dunes. Initially, shear-related, high-frequency vortex shedding dominates turbulence production. This increases until two-dimensional (2D) dunes have formed. Thereafter, turbulence intensities and Reynolds stress decline and three-dimensional dunes exhibit values found over 2D ripples. This is the result of shear layer dampening which occurs when the topographically-accelerated downstream velocity increases at a faster rate than flow depth. Activity at reattachment increases due to high velocity fluid imparting high mass and momentum transfer at the bed and/or wake flapping. Suspended sediment may also play a role in turbulence dampening and bed erosion. Ejections dominate over sweeps in terms of event frequency but not magnitude. Strong relationships between inward interactions and sweeps, and ejections and outward interactions, suggest that mass and momentum exchanges are dependent upon activity in all four quadrants. The results contradict the notion present in most physical models that larger bedforms exhibit most shear layer activity. Consequently an improved model for the ripple–dune transition is proposed.  相似文献   

7.
  相似文献   

8.
Flows with high suspended sediment concentrations are common in many sedimentary environments, and their flow properties may show a transitional behaviour between fully turbulent and quasi‐laminar plug flows. The characteristics of these transitional flows are known to be a function of both clay concentration and type, as well as the applied fluid stress, but so far the interaction of these transitional flows with a loose sediment bed has received little attention. Information on this type of interaction is essential for the recognition and prediction of sedimentary structures formed by cohesive transitional flows in, for example, fluvial, estuarine and deep‐marine deposits. This paper investigates the behaviour of rapidly decelerated to steady flows that contain a mixture of sand, silt and clay, and explores the effect of different clay (kaolin) concentrations on the dynamics of flow over a mobile bed, and the bedforms and stratification produced. Experiments were conducted in a recirculating slurry flume capable of transporting high clay concentrations. Ultrasonic Doppler velocity profiling was used to measure the flow velocity within these concentrated suspension flows. The development of current ripples under decelerated flows of differing kaolin concentration was documented and evolution of their height, wavelength and migration rate quantified. This work confirms past work over smooth, fixed beds which showed that, as clay concentration rises, a distinct sequence of flow types is generated: turbulent flow, turbulence‐enhanced transitional flow, lower transitional plug flow, upper transitional plug flow and a quasi‐laminar plug flow. Each of these flow types produces an initial flat bed upon rapid flow deceleration, followed by reworking of these deposits through the development of current ripples during the subsequent steady flow in turbulent flow, turbulence‐enhanced transitional flow and lower transitional plug flow. The initial flat beds are structureless, but have diagnostic textural properties, caused by differential settling of sand, silt and cohesive mud, which forms characteristic bipartite beds that initially consist of sand overlain by silt or clay. As clay concentration in the formative flow increases, ripples first increase in mean height and wavelength under turbulence‐enhanced transitional flow and lower transitional plug‐flow regimes, which is attributed to the additional turbulence generated under these flows that subsequently causes greater lee side erosion. As clay concentration increases further from a lower transitional plug flow, ripples cease to exist under the upper transitional plug flow and quasi‐laminar plug flow conditions investigated herein. This disappearance of ripples appears due to both turbulence suppression at higher clay concentrations, as well as the increasing shear strength of the bed sediment that becomes more difficult to erode as clay concentration increases. The stratification within the ripples formed after rapid deceleration of the transitional flows reflects the availability of sediment from the bipartite bed. The exact nature of the ripple cross‐stratification in these flows is a direct function of the duration of the formative flow and the texture of the initial flat bed, and ripples do not form in cohesive flows with a Reynolds number smaller than ca 12 000. Examples are given of how the unique properties of the current ripples and plane beds, developing below decelerated transitional flows, could aid in the interpretation of depositional processes in modern and ancient sediments. This interpretation includes a new model for hybrid beds that explains their formation in terms of a combination of vertical grain‐size segregation and longitudinal flow transformation.  相似文献   

9.
Reconstructing random topography from preserved stratification   总被引：2，自引：1，他引：2  
One of the fundamental problems of interpreting the sedimentary record is reconstructing the original heights of palaeotopographical features such as bedforms or river channels. This requires an understanding of the relationship between topography and set thickness, but at present an exact theory exists only for periodic topography of uniform height. The applicability of this simple theory is severely limited by the random variability characteristic of many sedimentary systems. In this paper, we develop an exact theory for the probability-density function (PDF) of sets generated from topography of random height. We focus on the limiting case of zero net deposition in order to provide a lower bound for the set thickness, and derive an analytical set-thickness PDF that is determined by one parameter of the PDF for topographical height. This parameter, β, measures the breadth of the tail of the topographical PDF. The mean set thickness is 0.8225 β for bedforms and 1.645 β for river channels. If the topographical height is gamma distributed, the preservation ratio, defined as (mean thickness of preserved sets)/(mean topographical height), is 0.8225 r2 for bedforms and 1.645 r2 for river channels, where r is the coefficient of variation (standard deviation/mean) of the generating topography. In a comparison with data from laboratory current ripples, our analytical predictions compare well with observations of both mean set thickness and thickness distribution. The preservation ratio for the ripples is about 0.5, whilst measured dune heights give a preservation ratio of about 0.12. Depth data from two modern braided streams yield preservation ratios ranging from 0.4 to 0.75. As more data on the distributions of topographical height in modern environments become available, calculations such as these should help provide reliable error bounds for quantitative topographical reconstruction.  相似文献   

10.
ABSTRACT There are very few field measurements of nearshore bedforms and grain‐size distribution on low‐energy microtidal beaches that experience low‐amplitude, long‐period waves. Field observations are needed to determine grain‐size distribution over nearshore bedforms, which may be important for understanding the mechanisms responsible for ripple development and migration. Additional nearshore field observations of ripple geometry are needed to test predictive models of ripple geometry. Ripple height, length and sediment composition were measured in the nearshore of several low‐energy beaches with concurrent measurements of incident waves. The distribution of sediment sizes over individual ripples was investigated, and the performance of several models of ripple geometry prediction was tested both spatially and temporally. Sediment samples were collected from the crest and trough of 164 ripples. The sand‐sized sediment was separated from the small amount (generally <3%) of coarser material (>2 mm) that was present. Within the sand‐sized fraction, the ripple crests were found to be significantly coarser, better sorted and more positively skewed than the troughs. Overall, the troughs were finer than the crests but contained a greater proportion of the small fraction of sediment larger than 2 mm. The field model of Nielsen (1981 ) and the model of Wiberg & Harris (1994 ) were found to be the most accurate models for predicting the wavelength of parallel ripples in the nearshore of the low‐energy microtidal environments surveyed. The Wiberg & Harris (1994 ) model was also the most accurate model for predicting ripple height. Temporal changes in ripple wavelength appear to be dependent on the morphological history of the bed.  相似文献   

11.
Interpreting the physical dynamics of ancient environments requires an understanding of how current‐generated sedimentary structures, such as ripples and dunes, are created. Traditional interpretations of these structures are based on experimental flume studies of unconsolidated quartz sand, in which stepwise increases in flow velocity yield a suite of sedimentary structures analogous to those found in the rock record. Yet cyanobacteria, which were excluded from these studies, are pervasive in wet sandy environments and secrete sufficient extracellular polysaccharides to inhibit grain movement and markedly change the conditions under which sedimentary structures form. Here, the results of flume experiments using cyanobacteria‐inoculated quartz sand are reported which demonstrate that microbes strongly influence the behaviour of unconsolidated sand. In medium sand, thin (ca 0·1 to 0·5 mm thick) microbial communities growing at the sediment–water interface can nearly double the flow velocity required to produce the traditional sequence of ripple→dune→plane‐bed lamination bedforms. In some cases, these thin film‐like microbial communities can inhibit the growth of ripples or dunes entirely, and instead bed shear stresses result in flip‐over and rip‐up structures. Thicker (ca≥1 mm thick) microbial mats mediate terracing of erosional edges; they also, foster transport of multi‐grain aggregates and yield a bedform progression consisting of flip‐overs→roll‐ups→rip‐ups of bound sand.  相似文献   

12.
The plan shape of current ripples in relation to flow conditions   总被引：3，自引：0，他引：3  
Two sets of empirical data on the relationship of the plan shape of current ripples to flow conditions previously thought incompatible are reconciled by taking explicit and necessary account of the effects of flow width relative to flow depth. The aspects of plan shape considered are the mean streamwise ripple wavelength and the wavelength, measured across the flow, of longitudinal features due to centrifugal instability formed on the backs of the ripples. A regression analysis connecting these attributes with flow conditions including the width-effect shows that the amount of unexplained variability is of the same order as the accumulated experimental errors, and suggests that the two sets of data are in excellent agreement. The relationship of the plan geometry to flow conditions is less simple than has sometimes been supposed, but ways are suggested in which the experimental results can be used to establish the hydraulics of past environments.  相似文献   

13.
The dynamics of large isolated sand dunes moving across a gravel lag layer were studied in a supply‐limited reach of the River Rhine, Germany. Bed sediments, dune geometry, bedform migration rates and the internal structure of dunes are considered in this paper. Hydrodynamic and sediment transport data are considered in a companion paper. The pebbles and cobbles (D50 of 10 mm) of the flat lag layer are rarely entrained. Dunes consist of well‐sorted medium to coarse sand (D50 of 0·9 mm). Small pebbles move over the dunes by ‘overpassing’, but there is a degree of size and shape selectivity. Populations of ripples in sand (D50 < 0·6 mm), and small and large dunes are separated by distinct breaks in the bedform length data in the regions of 0·7–1 m and 5–10 m. Ripples and small dunes may have sinuous crestlines but primarily exhibit two‐dimensional planforms. In contrast, large dunes are primarily three‐dimensional barchanoid forms. Ripples on the backs of small dunes rarely develop to maximum steepness. Small dunes may achieve an equilibrium geometry, either on the gravel bed or as secondary dunes within the boundary layer on the stoss side of large dunes. Secondary dunes frequently develop a humpback profile as they migrate across the upper stoss slope of large dunes, diminishing in height but increasing in length as they traverse the crestal region. However, secondary dunes more than 5 m in length are rare. The dearth of equilibrium ripples and long secondary dunes is probably related to the limited excursion length available for bedform development on the parent bedforms. Large dunes with lengths between 20 m and 100 m do not approach an equilibrium geometry. A depth limitation rather than a sediment supply limitation is the primary control on dune height; dunes rarely exceed 1 m high in water depths of ≈4 m. Dune celerity increases as a function of the mean flow velocity squared, but this general relationship obscures more subtle morphodynamics. During rising river stage, dunes tend to grow in height owing to crestal accumulation, which slows downstream progression and steepens the dune form. During steady or falling stage, an extended crestal platform develops in association with a rapid downstream migration of the lee side and a reduction in dune height. These diminishing dunes actually increase in unit volume by a process of increased leeside accumulation fed by secondary dunes moving past a stalled stoss toe. A six‐stage model of dune growth and diminution is proposed to explain variations in observed morphology. The model demonstrates how the development of an internal boundary layer and the interaction of the water surface with the crests of these bedload‐dominated dunes can result in dunes characterized by gentle lee sides with weak flow separation. This finding is significant, as other studies of dunes in large rivers have attributed this morphological response to a predominance of suspended load transport.  相似文献   

14.
  相似文献   

15.
For more than a century geologists have wondered why some bedforms are orientated roughly transverse to flow, whereas others are parallel or oblique to flow. This problem of bedform alignment was studied experimentally using subaqueous dunes on a 3–6-m-diameter sand-covered turntable on the floor of a 4-m-wide flume. In each experiment, two flow directions (relative to the bed) were produced by alternating the turntable between two orientations. The turntable was held in each orientation for a short time relative to the reconstitution time of the bedforms; the resulting bedforms were in equilibrium with the time-averaged conditions of the bimodal flows. Dune alignment was studied for five divergence angles (the angle between the two flow directions): 45°, 67–5°, 90°, 112–5° and 135°. The flow depth during all experiments was approximately 30 cm; mean velocity was approximately 50 cm s-1 and mean grain diameter was 0–6 mm. Each experiment continued for 30–75 min, during which time the flume flow was steady and the turntable position changed every 2 min. At the end of each experiment, water was slowly drained from the flume and dune alignment was measured. Transverse dunes (defined relative to the resultant transport direction) were created when the divergence angle was 45° and 67–5°, and longitudinal dunes were created when the divergence angle was 135°. At intermediate divergence angles, dunes with both orientations were produced, but transverse dunes were dominant at 90°, and longitudinal dunes were dominant at 112–5°. One experiment was conducted with a divergence angle of 135° and with unequal amounts of transport in the two flow directions. This was achieved by changing the orientation of the turntable at unequal time intervals, thereby causing the amount of transport to be unequal in the two directions. The dunes formed during this experiment were oblique to the resultant transport direction. These experimental dunes follow the same rule of alignment as wind ripples studied in previous turntable experiments. In both sets of experiments, the bedforms developed with the orientation having the maximum gross bedform-normal transport (the orientation at which the sum of the bedform-normal components of the two transport vectors reaches its maximum value). In other words, the bedforms develop with an orientation that is as transverse as possible to the two flows. In those cases where the two flows diverge by more than 90° and transport equal amounts of sand, bedforms that are as transverse as possible to the two separate flows will be parallel to the resultant of the two flow vectors. Although such bedforms have been defined by previous work as longitudinal bedforms, they are intrinsically the same kind of bedform as transverse bedforms.  相似文献   

16.
Measurements are described of the geometry of ripples formed on beds of sand exposed to a steady current at right angles to an oscillatory flow. Four different sands were studied. The oscillation was produced by an oscillating tray set into the bed of a steady-flow flume. It was observed that straight-crested ripples formed by oscillatory flow would usually develop a ‘serpentine’ form when the superimposed steady current exceeded a certain limit. For amplitudes of the tray velocity U∞ less than about 0.38 m s-1 this limit corresponded to U∞/ū*c>31, where ū*c is the shear velocity measured just upstream of the oscillating tray. It is suggested that the serpentine form is caused by the interaction of vortices carried back and forth between adjacent ripples. On this assumption, the wavelength of the serpentine form would be proportional to the product of period of oscillation and near-bed steady current velocity. The present measurements appear to support this hypothesis although there is also evidence that the wavelength is influenced by preferred spacing patterns between vortices. The measurements also show the ratio of the amplitude of the serpentine form to its wavelength to be approximately constant. Empirical relationships are derived relating ripple geometry to flow and sediment properties. It is observed that the influence of Reynolds number and sediment properties on the geometry is very weak. It is suggested that this is typical of ripples formed with relatively low sediment transport rates. It is also found that, under the present experimental conditions, the ripple spacing in the direction of oscillation is almost independent of the magnitude of the steady current and in close agreement with the wavelengths previously measured in an oscillating water tunnel. This suggests that the additional inertia effects associated with oscillating tray rigs were not sufficient to affect bed geometry under the present test conditions.  相似文献   

17.
Morris  Kenyon  Limonov  Alexander 《Sedimentology》1998,45(2):365-377
Side-scan sonar, seismic and core data are used to identify mega-flutes, transverse and ‘V’ shaped bedforms in turbidites around the Valencia channel mouth, north-west Mediterranean. Long-range side-scan sonar data reveal a broad, curved, asymmetric, channel, that widens and terminates downfan. The western channel bank near the channel mouth has been partly eroded by turbidity currents that spilled out of the channel. Transverse bedforms on the east of the channel floor are interpreted as antidunes and, if this interpretation is correct, they indicate that the flow was probably supercritical at least locally within the channel. Trains of mega-flutes, are incised into coarse-grained sediments of the channel floor near the channel mouth. The association of mega-flutes and antidunes is thought to be diagnostic of channel–lobe transitions on deep-sea fans. The mega-flutes pass downfan into an area of streaks that diverge at up to 45° and indicates flow expansion from the channel mouth. About 75 km downfan from the channel mouth, deep-towed side-scan data record transverse bedforms (interpreted as antidunes) passing downfan into an area covered by ‘V’ shaped bedforms with upflow pointing apices (named chevrons here). The chevrons are commonly c. 200 m from limb to limb and c. 2 m in amplitude with flow-parallel wavelengths of c. 400 m. We propose that chevrons were formed by a strong, probably supercritical (or near critical) turbidity current spreading from the channel mouth and flowing towards the Balearic Abyssal Plain. Thinning of the turbidity current, resulting from flow spreading would allow the Froude number to remain high up to 100 km from the channel mouth and could explain the observed reduction in antidune wavelength.  相似文献   

18.
Analysis of an 18-day time-lapse film record of shoreface ripple development, with concurrent measurements of near-bottom flow and surface waves, provides new insight on equilibrium bedform conditions, adjustment of ripple planform to variable hydrodynamics, and ripple migration behaviour. The study was conducted in approximately 10 m water depth, 1 km off Martinique Beach on the Atlantic coast of Nova Scotia (Canada), under low-energy summer wave conditions. Significant wave-height and peak period during the study averaged 0–7 m and 8 s, respectively, with extremes up to 1–7 m and 11 s during passage of three weak weather disturbances. Six mutually exclusive ripple types have been defined: (1) short-wavelength regular ripples; (2) variable bifurcated ripples; (3) variable terminated ripples; (4) short-crested ripples; (5) long-wavelength regular ripples; and (6) chaotic ripples. Ripple wavelength ranged from 0–07 m to 0–24 m and displayed a strong Reynolds number dependence. Together with other published field data, the results suggest a lower limit of γ=0–06 m for the wavelength of wave ripples in ocean shoreface environments. Ripple orientation ranged through 38° and responded rapidly to changes in wave approach direction, but did not conform to the orientation of the adjacent shoreline. Ripples were observed to migrate both on- and off-shore (with and against the wave advance direction) at rates up to ±0–1 m h-1, associated with net flows other than wave-induced onshore asymmetry and mass transport. Migration (mainly of ripple types 1 and 2) occurred during the peak of storm events, but showed no obvious correlation with measured near-bottom flow magnitude or direction. Ripple behaviour demonstrates equilibrium with prevailing dynamic conditions when straight-crested rippie types 1 and 5 are present. Disequilibrium in orientation or dimensions is expressed by increasing sinuosity, bifurcation and crest termination in types 2,3,4 and 6.  相似文献   

19.
An active oolitic sand wave was monitored for a period of 37 days in order to address the relationship between the direction and strength of tidal currents and the resultant geometry, and amount and direction of migration of bedforms in carbonate sands. The study area is situated in a tidal channel near Lee Stocking Island (Exumas, Bahamas) containing an estimated 5.5 to 6 × 105 m3 of mobile oolitic sand. Tidal ranges within the inlet are microtidal and the maximum current velocity at the studied site is 0.6 m s?1. At least 300–400 m3 of mostly oolitic sand are formed within, or brought into, the channel area every year. The tidal inlet is subdivided into an ocean-orientated segment, in which sand waves are shaped by both flood and ebb tides, and a platform-orientated segment, where sand waves are mainly shaped by flood tides. The studied sand wave lies on the platformward flood-tide dominated segment in a water depth of 3.5.4.5 m. During the 37 days of observation, the oolitic and bioclastic sand wave migrated 4 m in the direction of the dominant flood current. The increments of migration were directly related to the strength of the tide. During each tidal cycle, bedforms formed depending on the strength of the tidal current, tidal range and their location on the sand wave. During flood tides, a steep lee and a gentle stoss side formed and current ripples and small dunes developed on the crest of the sand wave, while the trough developed only ripples. The average lee slope of the sand wave is 24.2°, and therefore steeper than typical siliciclastic sand waves. During ebb tides, portions of the crest are eroded creating a convex upward ebb stoss side, covered with climbing cuspate and linguoid ripples and composite dunes. The area between the ebb-lee side and the trough is covered with fan systems, sinuous ripples and dunes. The migration of all bedforms deviated to a variable degree from the main current direction, reflecting complex flow patterns in the tidal inlet. Small bedforms displayed the largest deviation, migrating at an angle of up to 90° and more to the dominant current direction during spring tides.  相似文献   

20.
Response of sand ripples to change in oscillatory flow   总被引：3，自引：1，他引：3  
Ripples take time to evolve to a new equilibrium state in response to a change in wave-generated oscillatory flow. The paper presents results from flow tunnel experiments designed to examine oscillatory flow transient ripple processes under controlled, full-scale laboratory conditions. The experiments include study of the growth of ripples from flat bed and the evolution of existing ripples to new equilibrium ripples in response to a step change in the flow. In general, ripples evolve through a combination of two main processes: (i) from a flat bed or from a bed consisting of ripples that are smaller than the equilibrium ripples through a combination of 'slide' and 'merge'; (ii) from a bed consisting of ripples that are larger than the equilibrium ripples through a combination of 'split' and 'merge'. The experimental results show that equilibrium ripple geometry is independent of initial bed morphology while the time to reach equilibrium is largely independent of the initial bed and the equilibrium ripple size. The time to reach equilibrium depends strongly on the mobility number, and a new empirical equation relating mobility number and the number of flow cycles to equilibrium is proposed. This equation is combined with a simple exponential function for ripple height growth or decay to produce a new empirical model for ripple height evolution, which gives a reasonably good overall agreement with the measurements. The model is based on experiments involving one sediment size only and further work is needed to develop the model for other sand sizes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号