首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Honeycomb weathering has been observed in a Carboniferous sandstone at a coastal location near Ballycastle on the north coast of Northern Ireland. Specimens of this sandstone have been analysed by X-ray diffraction, scanning electron microscopy, and energy dispersive spectrometry. Results reveal that calcium sulphate (gypsum) is the only salt present and is found only at and immediately below the rock surface. SEM observations suggest that crystallization of salts in pores could easily dislodge quartz grains to promote granular disintegration, whilst etching of quartz grain surfaces attests to chemical weathering activity within the rock However, the reason for the development of the honeycomb pattern is not known.  相似文献   

2.
Consideration of the mechanisms associated with the granular disintegration of rock has been limited by available data. In most instances, both the size of the transducer and the nature of the study have negated any applicability of the resulting data to the understanding of grain‐to‐grain separation within rock. The application of microthermocouples (≤0·15 mm diameter) and high‐frequency logging (20 s intervals) at a taffoni site on southern Alexander Island and from a rock outcrop on Adelaide Island (Antarctica) provide new data pertaining to the thermal conditions, at the grain scale, of the rock surface. The results show that thermal changes (ΔT/t) can be very high, with values of 22 °C min?1 being recorded. Although available data indicate that there can be differences in frequency and magnitude of ?uctuations as a function of aspect, all aspects experienced some large magnitude (≥2 °C min?1) ?uctuations. Further, in many instances, large thermal changes in more than one direction could occur within 1 min or in subsequent minutes. These data suggest that the surface grains experience rapidly changing stress ?elds that may, with time, effect fatigue at the grain boundaries; albedo differences between grains and the resulting thermal variations are thought to exacerbate this. The available data failed to show any indication of water freezing (an exotherm) and thus it is suggested that microgelivation may not play as large a role in granular breakdown as is often postulated for cold regions, and that in this dry, Antarctic region thermal stress may play a signi?cant role. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

3.
Four rock types (basalt, sandstone, granite, and chalk) are examined with respect to the maximum surface temperatures which they experience when subjected to similar conditions of exposure. Rock temperature measurements are reported for an urban environment and for two experimental situations in which an infrared lamp is used to simulate heating under cold and hot conditions. Differences in rock temperatures are discussed with reference to thermal rock properties (albedo, specific heat capacity, and thermal conductivity). Some natural situations are suggested in which thermal rock properties could conceivably play a role in determining the extent to which rocks would be affected by particular weathering processes.  相似文献   

4.
Rapid surface lowering of bedrock is taking place in the supratidal zone by salt spray weathering. A seven-year run of data demonstrates a mean rate of lowering of 0·625 mm a?1. Considerable variation exists in annual point lowering values within measurement sites, although between-site variation is not significant. Aggregate year to year variations in surface lowering are not significant. Spatial variation in individual point values may be compensated by temporal variation over an 11-year period. There is a marked summer maximum in surface lowering rate, and this is strongly correlated with monthly air temperature. Spatially and temporally episodic swelling of the rock surface is demonstrated. This does not correlate statistically with any available climatic variable and is deemed to be a real and largely stochastic phenomenon. It is interpreted as rock bursting at the granular scale due to haloclasty. The processes most likely to be responsible for the observed rapid denudation are crystallization and thermal expansion of halite, both of which are enhanced by high summer temperatures.  相似文献   

5.
Discussions regarding weathering in cold environments generally centre on mechanical processes and on the freeze–thaw mechanism in particular. Despite the almost ubiquitous assumption of freeze–thaw weathering, unequivocal proof of interstitial rock water actually freezing and thawing is singularly lacking. Equally, many studies have used the crossing of 0 °C, or values close to that, as the basis for determining the number of ‘freeze–thaw events’. In order to assess the weathering regime at a site in northern Canada, temperatures were collected at the surface, 1 cm and 3 cm depth for sets of paving bricks, with exposures both vertical and at 45°, orientated to the four cardinal directions. Temperature data were collected at 1 min intervals for 1 year. These data provide unequivocal proof for the occurrence of the freezing and thawing of water on and within the rock (freeze–thaw events). The freeze event is evidenced by the exotherm associated with the release of latent heat as the water actually freezes. This is thought to be the ?rst record of such events from a ?eld situation. More signi?cantly, it was found that the temperature at which freezing occurred varied signi?cantly through the year and that on occasion the 1 cm depth froze prior to the rock surface. The change in freeze temperature is thought to be due to the chemical weathering of the material (coupled with on‐going salt inputs via the melting of snowfall), which, it is shown, could occur throughout the winter despite air temperatures down to ?30 °C. This ?nding regarding chemical weathering is also considered to be highly signi?cant. A number of thermal stress events were also recorded, suggesting that rock weathering in cold regions is a synergistic combination of various chemical and mechanical weathering mechanisms. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

6.
The wetting–drying and warming–cooling behaviours of rock and stone are known to influence the nature and rate of weathering. The way materials warm‐up and dry‐out also influences their suitability as biological substrata. While rock thermal behaviours have been measured under controlled laboratory conditions, previous experiments have largely been restricted to terrestrial simulations due to practical constraints. Where efforts have been made to simulate intertidal conditions, expansion and contraction of rocks or rates of breakdown (i.e. sediment production and weight loss) have been measured, while detailed observations of thermal and drying behaviours have rarely been made. A simple, semi‐automated procedure is described that enabled measurement of surface temperatures and desorption (evaporative water loss) for different material types (rock and concrete) under simulated semidiurnal tide conditions. Some preliminary results are presented illustrating the types of data that were obtained, and comparisons are made with temperature data collected on a rock platform in the UK to assess the ability of the procedure to adequately represent field conditions. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

7.
The role of solar‐induced thermal stresses in the mechanical breakdown of rock in humid‐temperate climates has remained relatively unexplored. In contrast, numerous studies have demonstrated that cracks in rocks found in more arid mid‐latitude locations exhibit preferred northeast orientations that are interpreted to be a consequence of insolation‐related cracking. Here we hypothesize that similar insolation‐related mechanisms may be efficacious in humid temperate climates, possibly in conjunction with other mechanical weathering processes. To test this hypothesis, we collected rock and crack data from a total of 310 rocks at a forested field site in North Carolina (99 rocks, 266 cracks) and at forested and unforested field sites in Pennsylvania (211 rocks, 664 cracks) in the eastern United States. We find that overall, measured cracks exhibit statistically preferred strike orientations (47° ± 16), as well as dip angles (52° ± 24°), that are similar in most respects to comparable datasets from mid‐latitude deserts. There is less variance in strike orientations for larger cracks suggesting that cracks with certain orientations are preferentially propagated through time. We propose that diurnally repeating geometries of solar‐related stresses result in propagation of those cracks whose orientations are favorably oriented with respect to those stresses. We hypothesize that the result is an oriented rock heterogeneity that acts as a zone of weakness much like bedding or foliation that can, in turn, be exploited by other weathering processes. Observed crack orientations vary somewhat by location, consistent with this hypothesis given the different latitude and solar exposure of the field sites. Crack densities vary between field sites and are generally higher on north‐facing boulder‐faces and in forested sites, suggesting that moisture‐availability also plays a role in dictating cracking rates. These data provide evidence that solar‐induced thermal stresses facilitate mechanical weathering in environments where other processes are also likely at play. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

8.
Despite numerous investigations on substrate‐inhabiting microflora, especially lichens, very little is known about the colonization of coastal escarpments by lithobiontic micro‐organisms, inland of a retreating coastline in Africa. Reported herein are the results of a combined field observation and microscopy study focusing on the connection between microrelief of the substrate, colonies of lithobiontic micro‐organisms (in particular the lichen Xanthoria parietina) and microstructures of putative bacterial origin. The occurrence of weathering pits in which the early stages of the biotic development occurs, and the subsequent disintegration of the rock indicate that lichens, mosses and fungi act synergistically by alternating chemical and mechanical weathering. Penetration of grains by expansion and contraction of the hyphae depletes the rock matrix and contributes to the mechanical breakdown of the rock. Calcite rhombs on the weathered surfaces of the calcite‐cemented sandstones are severely etched with well‐developed rhomb‐shaped etch pits (‘spiky calcite’), holes, or has one or more of the faces removed, and their cores exposed and leached. Nanofilaments (c. 100–700 nm) and ‘nanomicrobial’ fruiting bodies (c. 250 nm) emanating from micropores appear to be common on affected crystalline structures. Weddellite present immediately below the thallus is a strong indicator of biomineralization. Quartz responds differently to chemical weathering by producing peeling structures and microbrecciation features. The dissolution of these crystals appears to be a surface reaction‐controlled process mediated by microbial microfilaments and nanofilaments. A model is proposed, firstly indicating early‐stage biochemical weathering, followed by biophysical weathering. Disintegration of the rock outcrops in due to a complex interplay of several events, probably beginning at the nanoscale with penetration of sites on crystal faces. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

9.
Aerial and sub‐aerial climatic data were collected from a station at 1920 m a.s.l. in the Injisuthi region of the South African Drakensberg. Sensors monitored air temperature, soil surface and rock surface temperature, for two rock types, over the summer and winter of 2001/2002. Rainfall was measured from the summer of 2001 to January 2004. These are the first rock and soil surface‐climate data to be collected for an exposed site at this altitude in the area. Rainfall over the two calendar years 2002 and 2003 was found to be below estimates for the region, but patterns imply numerous rock wetting and drying cycles in summer. At the site, air, rock and soil temperatures differ considerably on a diurnal basis with respect to both absolute temperature and daily ranges. Mean rock daily ranges, as conducive to possible thermal fatigue, are found to be similar in the summer and winter periods. Of the two rock types monitored, the darker coloured basalt attained higher maximum and marginally lower minimum temperatures than the sandstone. Soil frost did not occur at 2·5 cm depth, but rock did reach below ?6 °C in winter. Both rock types maintain relatively high rock temperatures in winter (exceeding 25 °C), thus chemical weathering is probably only moisture restricted during this dry period. Findings highlight the importance of directly monitoring rock temperature when attempting to discern the rock weathering environment. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

10.
Tafone‐like depressions have developed on the Aoshima sandstone blocks used for a masonry bridge pier in the coastal spray zone. A thin layer of partial granular disintegration was found on the surface in depressions. To evaluate quantitatively the strength of the thin weathered layer, the hardness was measured at the surface of the sandstone blocks using both an Equotip hardness tester and an L‐type Schmidt hammer. Comparison of the two testing results indicates that the Equotip hardness value is more sensitive in evaluating the strength of a thin layer of weathered surface rock than the Schmidt hardness value. By applying two methods, i.e. both the repeated impact method and the single impact method, the Equotip tester can evaluate the strengths of fresh internal and weathered surficial portions of rocks having a thin weathering layer. Comparison of the two strengths enables evaluation of strength reduction due to weathering. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

11.
Subsurface temperatures in rocks naturally fluctuate under the influence of local meteorological conditions. These fluctuations play a role in mechanical weathering, thus creating the environmental conditions conducive to natural hazards such as rockfalls and providing important sediment source terms for landscape evolution. However, the physics that control heat penetration into rocks are not fully understood, which makes the underground thermal state difficult to interpret when temperature measurements are available and even more difficult to estimate for unmonitored sites. This is an important lacuna given possible impacts of future climate change on mechanical weathering processes. The natural daily variations of subsurface temperatures were investigated on a bare gneiss outcrop exposed to solar radiation, where temperatures at various depths (up to 50 cm), as well as the solar radiation reaching a pyranometer, were monitored hourly for several months. This detailed times series of thermal data was used to gain insight into the heat balance at the inclined free surface of the rock mass. Attention was focused on two major contributors to the heat balance; the heat flux entering the rock mass through conduction and the incoming shortwave (solar) radiation. A Fourier decomposition of the temperature measurements provided an estimate of the in situ thermal conductivity of the rock and was used to calculate the conductive term. The shortwave radiation term was determined on the basis of the pyranometer measurements adjusted to account for the angle of incidence of the sun. It is shown that, throughout clear‐sky periods, heat exchanges at the surface are mainly controlled by direct solar radiation during the day, and by a roughly constant outgoing heat flux during the night. Subsurface temperatures can be reliably estimated with a semi‐infinite medium model whose boundary condition is derived from an analytical insolation model that takes atmospheric attenuation into account. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

12.
The way in which rocks and engineering materials heat‐up and dry‐out in the intertidal zone is of relevance to both weathering and ecology. These behaviours can be measured in the laboratory under controlled conditions designed to replicate those occurring in the field. Previous studies have demonstrated differences in thermal behaviours between rock types and through time as a result of soiling in terrestrial environments, but the influence of weathering and colonization on rock behaviours in the intertidal zone has not been previously assessed. We measured the warming and drying of blocks of rock (limestone and granite) and marine concrete during ‘low‐tide’ events simulated in the laboratory, before and after a period of exposure (eight months) on rock platforms in Cornwall, UK. As well as differences between the material types, temperatures of control (unexposed) and field‐exposed blocks differed in the order of 1 to 2 °C. Drying behaviours were also different after field exposure. Differences during the first few hours of exposure to air and heat were attributed to discolouration and albedo effects. Over longer periods of time, changes in the availability of near‐surface pore water as a result of micro‐scale bioerosion of limestone and the development of bio‐chemical crusts on marine concrete [observed using scanning electron microscopy (SEM)] are suggested as mechanisms enhancing and reducing, respectively, the efficiency of evaporative cooling. The retention of moisture by epilithic biofilms may also influence thermal and drying behaviours of granite. These observations represent one of the first examples of cross‐scalar biogeomorphic linkages in the intertidal zone. The significance of the results for the subsequent efficiency of weathering, and near‐surface micro‐climatic conditions experienced by colonizing organisms is discussed. The involvement of microorganisms in the creation of more (or less) ecologically stressful conditions through the alteration of substratum geomorphic properties and behaviours is suggested as an example of ‘biogeomorphic ecosystem engineering’. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

13.
Spheroidal weathering, one of the important rock weathering styles, has been attributed to chemical weathering by the water from joint surfaces, and mechanical aspects of the weathering have not been well addressed. We made an investigation on spheroidal weathering of Miocene granite porphyry with well‐developed columnar joints and found that this spheroidal weathering proceeds through chemical processes and accompanying mechanical processes. The investigation of the textures, physical properties, mineralogy, and chemistry of the porphyry revealed the presence of a brown band on the surface margins of corestones, representing the oxidation of pyrite and chlorite, and the precipitation of iron hydroxides, and the consequent generation of micro‐cracks within the band. During weathering, oxidation progresses inwards from joints that surround the rindlets, including both high‐angle columnar and low‐angle planar joints, and causes rounding of the unweathered interior portion of the rock. Microscopic observations of the brown band embedded with fluorescent resin show that pores are first filled with iron hydroxides, and that micro‐cracks then form parallel to the oxidation front in the outer portion of the brown band. Iron hydroxide precipitation increases the P‐wave velocity in the brown band, while micro‐crack formation decreases the tensile strength of the rock. Where the brown band has thickened to ~6 cm, the micro‐cracks are connected to one another to create continuous cracks, which separate the rindlets from the corestone. Micro‐crack formation parallel to the corestone surface may be attributed to compressive stresses generated by small amounts of volumetric expansion due to the precipitation of iron hydroxides in the brown band. Earth surface is under oxidizing environments so that precipitation of iron hydroxides commonly occurs; the spheroidal weathering in this paper is a typical example of the combination of chemical and mechanical processes under such environments. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

14.
Despite recent rapid advances in the field of structure-from-motion (SfM) photogrammetry, the use of high-resolution data to investigate small-scale processes is a relatively underdeveloped field. In particular, rock weathering is rarely investigated using this suite of techniques. This research uses a combination of traditional non-destructive rock weathering measurement techniques (rock surface hardness) and SfM to map deterioration and loss of cohesion of the surface using three-dimensional data. The results are used to interpret weathering behaviour across two different lithologies present on the site, namely shale and limestone. This new approach is tested on seven sites in Longyearbyen, Svalbard, where active weathering of a rock surface was measured after 13 years of exposure to extreme temperature regimes and snow cover. The surface loss was quantified with SfM and combined with rock surface hardness measurement distributions extrapolated in geographic information system (GIS). The combined results are used here to quantify the difference in response of both lithologies to these extreme temperatures. This research demonstrates the potential for further integration of SfM in rock weathering research and other small-scale geomorphological investigations, in particular in difficult field conditions where portability of field equipment is paramount. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.  相似文献   

15.
Fire in the natural environment is a widespread agent of geomorphological and biological change. Temperatures can exceed 1000°C. There is often a rapid rise from ambient conditions through a steep thermal gradient, promoting rock disintegration. Laboratory simulation studies have established that temperature changes which are representative of natural fires affect rock material properties, which can then be related to weathering susceptibility. This study extends previous work by more closely replicating the natural environment, (a) through the simulation of rainfall and (b) by encasing samples to reflect the exposure of a single rock face to a passing fire event. Rock samples collected on Cyprus were prepared and tested following previously reported procedures. Change in modulus of elasticity was monitored using a non-destructive ultrasonic method. The data corroborate previous work but with somewhat different degrees of change. The new results are more likely to be representative of natural conditions and real-world change. The rate of rock disintegration and effects such as case-hardening appear to be a function of rock thermal characteristics, material properties and environmental constraints such as diurnal temperature range. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

16.
In this study laboratory experiments were used to explore the role of biofilms, formed by lithobiontic microorganism communities, in causing hourly surface changes of supratidal sandstone and the potential linkage to long-term rock decay. To isolate the influence of individual environmental factors (temperature and humidity) on rock surface changes (expansion and contraction), a colonized (biofilm-covered) and a non-colonized sandstone block (biofilm-free) underwent the same univariate microclimatic simulations closely controlled by an environmental chamber. Simulations were run under three different light conditions, with a natural light lamp on, on and off at 20-min intervals and off, to investigate the impact of light on rock surface dynamics. Measured with a traversing micro-erosion meter (TMEM), two-hourly microtopographic fluctuations of these two sandstone blocks were compared in the same environment. Induced by microclimatic variations, surface movements of significantly higher magnitude (12–120% under varying tempeature and 121–154% under varying humidity) and different change patterns were observed on the colonized block, indicating the primary role of biofilm in driving microtopographic fluctuations of supratidal sandstone. However, thermally driven changes of similar magnitude and pattern were observed on both surfaces, suggesting other mechanisms also operating on the non-colonized rock surface in this process. Due to the sensitivity of biofilm microorganism communities to light, the magnitude and pattern of surface changes was impacted by light condition. Because biofilms increased the magnitude and number of cycles of expansion and contraction of the experimental rock surface, we propose that lithobiontic biofilms facilitate the detachment of grains and granular disintegration on the rock surface, consequently contributing to rock decay and accelerating the rate of breakdown of supratidal rock. This short-term episode therefore needs to be superimposed on longer term studies to fully understand the role of biofilms in rock surface change. © 2019 John Wiley & Sons, Ltd.  相似文献   

17.
Historic structures can be viewed as exposure trials of the stone of which they are constructed. As such, they represent a geomorphological weathering experiment. Several structures of Henrician (sixteenth century) and greater age on the coast of southwest England have been exposed to coastal salt weathering for 500–600 years. Long‐term weathering rates on five different rock groups are derived from careful study of weathering depths and forms. There is significant variation in weathering rate between five major rock groups. Rank ordering of weathering rate values reveals a durability order of these rock groups, which is confirmed by local juxtapositions. Controls on rock durability in the coastal weathering environment include both mechanical and mineralogical characteristics. Specific density, and combined quartz and muscovite content, are positively related to durability; high feldspar and chlorite content are associated with low durability. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

18.
Quartz and quartzite are thought to be resistant as a mineral and a rock respectively; however, we have shown that the presence of small amounts of pyrite in the quartzites makes them vulnerable to weathering. We observe that weathering of Proterozoic quartzite in the semi‐arid conditions around Delhi proceeded from fractures towards the inside and produced weathering rinds. The chemical index of alteration (CIA), which is actually a measure of weathering of aluminosilicate minerals, increases from the core outwards, through the rinds. Although aluminosilicate minerals occur only as minor phases (<2 per cent), their weathering indicates a movement of the weathering front from the periphery towards the core. We have suggested a coupled mechanism in which the dissolution of pyrites by moving water produced a sulphate‐bearing acidic solution and ferrous iron, which reacted with aluminosilicate minerals and quartz, respectively. This initially makes the Delhi quartzite porous and subsequently friable. The total disintegration of grain to grain contacts imparted friability to this quartzite to produce silica sand. Subsequent physical erosion of loose sand, produced during rind development in the outermost zones, has given rise to features like tors, spheroids, gullies, cavities and small‐scale caves on these quartzites. Thus, the terrain has acquired ruggedness in semi‐arid conditions. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

19.
Fires occur frequently in many biomes and generate high temperatures on the ground surface. There are many field examples of fire causing rock disintegration. The simulation of fire in the laboratory (using a furnace) and the monitoring of changes in rock modulus of elasticity (with a Grindosonic apparatus), reveal that different rocks respond differently to heating. Significant decreases in elasticity occur at temperatures as low as 200°C and granites display particularly marked reductions. Extended periods of heating are not required for significant reductions to occur. It is postulated that the degree of change in elasticity as a result of simulated fire is such that rock outcrops subjected to real fires are likely to be sufficiently modified as to increase their susceptibility to erosion and weathering processes.  相似文献   

20.
Rock moisture during freeze–thaw events is a key factor for frost weathering. Data on moisture levels of natural rockwalls are scarce and difficult to obtain. To close this gap, we can benefit from the extensive knowledge of moisture‐related phenomena in building materials, which is incorporated into simulation software, for example the WUFI® package of the Fraunhofer Institute of Building Physics. In this paper we applied and adapted this type of simulation to natural rockwalls to gain new insights on which moisture‐related weathering mechanisms may be important under which conditions. We collected the required input data on physical rock properties and local climate for two study areas in the eastern European Alps with different elevation [Sonnblick, 3106 m above sea level (a.s.l.) and Johnsbach, 700 m a.s.l.] and different lithologies (gneiss and dolomite, respectively). From this data, moisture profiles with depth and fluctuations in the course of a typical year were calculated. The results were cross‐checked with different thermal conditions for frost weathering reported in the literature (volumetric expansion and ice segregation theories). The analyses show that in both study areas the thresholds for frost cracking by volumetric expansion of ice (90% pore saturation, temperature < ?1 °C) are hardly ever reached (in one year only 0.07% of the time in Johnsbach and 0.4% at Sonnblick, mostly in north‐exposed walls). The preconditions for weathering by ice segregation (?3 to ?8 °C, > 60% saturation) prevail over much longer periods; the time spent within this ‘frost cracking window‘ is also higher for north‐facing sites. The influence of current climate warming will reduce effective frost events towards 2100; however the increase of liquid precipitation and rock moisture will promote weathering processes like ice segregation at least at the Sonnblick site. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号