首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 265 毫秒
1.
VALLEY SLOPE DEFORMATION BY INTERACTION OF MASS ROCK CREEP,TALUS CREEP AND RAPID LANDSLIDES ALONG THE KALI GANDAKI RIVER IN THE HIMALAYAS OF WESTERN NEPAL1　AmatyaKM ,InavaliBM .GeologicalMapofNepalwithExplanatoryNote[M ].DepartmentofMinesandGeology(DMG) ,Kathmandu ,Nepal,1994 2　ChigiraM .Long termGravitationalDeformationofRocksbyMassRockCreep[J].EngineeringGeology ,1992 ,32 :15 7～ 184. 3　SELBYMJ .HillslopeMate…  相似文献   

2.
The first erosional front of the south‐eastern Alps has been affected by several deep‐seated landslides. The movements affected a Jurassic limestone sequence underlain by an upper Trias unit (Keuper) mainly composed of marl and clays. Horst‐ and graben‐like structures, newly formed gravitational faults, outflow and other field evidence suggest that such movements are consistent with lateral rock spreading processes. An example of such processes is the ‘La Marbrière’ slope, where field investigations have revealed that three distinct zones corresponding to three evolutionary stages of movement exist. The question is: What are the structural and mechanical modifications undergone by the slope between those evolution stages? To tackle this question, numerical models based on a 2D cross section of the ‘La Marbrière’ slope have been performed. Results show that, to fit the structural evidence of the precollapse situation, elasto‐plastic behaviour of the Trias Keuper unit is needed. The transition between the precollapse and fresh post‐collapse situations requires a modification of the mechanical behaviour of the Trias Keuper unit to Burger type, resulting in the formation of antithetic and synthetic gravitational faults (producing a graben‐like structure).  相似文献   

3.
We present in this paper some new evidence for the change during the Quaternary in kinematics of faults cutting the eastern margin of the Tibetan Plateau. It shows that significant shortening deformation occurred during the Early Pleistocene, evidenced by eastward thrusting of Mesozoic carbonates on the Pliocene lacustrine deposits along the Minjiang upstream fault zone and by development of the transpressional ridges of basement rocks along the Anninghe river valley. The Middle Pleistocene seems to be a relaxant stage with local development of the intra-mountain basins particularly prominent along the Minjiang Upstream and along the southern segment of the Anninghe River Valley. This relaxation may have been duo to a local collapse of the thickened crust attained during the late Neogene to early Pleistocene across this marginal zone. Fault kinematics has been changed since the late Pleistocene, and was predominated by reverse sinistral strike-slip along the Minshan Uplift, reverse dextral strike-slip on the Longmenshan fault zone and pure sinistral strike-slip on the Anninghe fault. This change in fault kinematics during the Quaternary allows a better understanding of the mechanism by which the marginal ranges of the plateau has been built through episodic activities.  相似文献   

4.
Livio  F. A.  Zerboni  A.  Ferrario  M. F.  Mariani  G. S.  Martinelli  E.  Amit  R. 《Landslides》2022,19(8):1825-1841

Triggering mechanisms and causative processes of deep-seated gravitational slope deformations (DSGSD) in Alpine and high mountain areas include, among others, post-glacial de-buttressing, earthquake-induced ground shaking, or co-seismic surface faulting. Distinguishing between climatic or tectonically driven factors is challenging since faults and fracture systems can play both an active and/or passive role in the process initiation. We applied an integrated approach, including morpho-structural analysis, geologic field survey, a paleoseismological approach applied to trenching, radiocarbon dating and detailed sedimentological analysis, to a DSGSD located in the Cavargna Valley (N Italy), an area that was never occupied by extensive ice tongues in the Upper Pleistocene and Holocene. We were able to document at least two phases of movement from the Middle Holocene onwards and related triggering factors. Thanks to the comparison with dated lacustrine turbidites in the Alpine Lakes, we argue a seismic triggering for the landslide onset, with a possible source located in southern Switzerland, close to the Insubric Line. The later evolution of the landslide was instead driven by climatic predisposing conditions (humid and cold), instead, corresponding to a phase of enhanced slope instability.

  相似文献   

5.
This paper examines the morphotectonic and structural–geological characteristics of the Quaternary Martana Fault in the Umbria–Marche Apennines fold‐and‐thrust belt. This structure is more than 30 km long and comprises two segments: a N–NNW‐trending longer segment and a 100°N‐trending segment. After developing as a normal fault in Early Pleistocene times, the N–NNW Martana Fault segment experienced a phase of dextral faulting extending from the Early to Middle Pleistocene boundary until around 0.39 Ma, the absolute age of volcanics erupted in correspondence to releasing bends. The establishment of a stress field with a NE–ENE‐trending σ3 axis and NW–NNW σ1 axis in Late Pleistocene to Holocene times resulted in a strong component of sinistral faulting along N–NNW‐trending fault segments and almost pure normal faulting on newly formed NW–SE faults. Fresh fault scarps, the interaction of faulting with drainage systems and displacement of alluvial fan apexes provide evidence of the ongoing activity of this fault. The active left‐lateral kinematic along N–NNW‐trending fault segments is also revealed by the 1.8 m horizontal offset of the E–W‐trending Decumanus road, at the Roman town of Carsulae. We interpret the present‐day kinematics of the Martana Fault as consistent with a model connecting surface structures to the inferred north‐northwest trending lithospheric shear zone marking the western boundary of the Adria Plate. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

6.
A detailed field mapping, coupled with structural analyses and morphological investigation, has been carried out along the northern and western borders of the Hyblean Plateau (SE Sicily), in order to define the nature and the kinematics of a major Quaternary fault belt. This, here designed as the Scicli Line Fault Belt, is composed of two N50 oriented extensional basins that, linked by a regional N10 trending transfer zone, originated during the Early Pleistocene and experienced, since the Late Quaternary, a positive tectonic inversion. In both the two stages of deformation, the Scicli Line Fault Belt has been characterised by displacement-rate comparable with the relative velocities measured between the distinct plates composing the central Mediterranean region. In the period going from 1.5–1.2 to 0.85 Ma, the fault belt accommodated the entire divergence between Adria and Nubia. At present, the Scicli Line Fault Belt absorbs most of the Nubia–Eurasia convergence, while the western divergent margin of the Adria microplate has jumped to the eastern and the southern margins of the Hyblean Plateau, along the Late Quaternary Siculo–Calabrian Rift Zone. The off-shore prolongation of the two tectonic boundaries of the Hyblean Plateau has been recognised in the Sicily Channel, where they are both interrupted by a WNW-ESE oriented dextral fault. According to our reconstruction, the Hyblean Plateau represents an isolated lithospheric block, whose evolution can be related to the propagation of the western divergent margin of the Adria microplate, accompanied with the southward migration of the triple junction between Eurasia, Nubia and Adria. In this new large-scale kinematic picture, the GPS velocity measured in the Hyblean region, at the permanent site of NOTO, is actually representative of the local kinematics, rather than of the entire African promontory of southern Italy. This implies a correction of previous regional kinematic models based on combination of GPS vectors. In particular, our data constrain a new interpretation both for the kinematics along the E–W oriented Nubia–Eurasia margin, dominated by prevalent dextral deformation rather than reverse motions, and for the intraplate deformation in the Sicily Channel, within the Africa promontory, which would be dominated by a roughly N110° oriented extension. This conclusion has implication also on the mechanism and the origin of the Pantelleria–Linosa–Malta Rift that is here interpreted as a transtensive feature developed along a major transform fault, rather than the result of passive rifting induced by the Nubia–Eurasia collision, as it is currently interpreted.  相似文献   

7.
Shmuel Marco   《Tectonophysics》2007,445(3-4):186-199
The location of the active fault strands along the Dead Sea Transform fault zone (DST) changed through time. In the western margins of Dead Sea basin, the early activity began a few kilometers west of the preset shores and moved toward the center of the basin in four stages. Similar centerward migration of faulting is apparent in the Hula Valley north of the Sea of Galilee as well as in the Negev and the Sinai Peninsula. In the Arava Valley, seismic surveys reveal a series of buried inactive basins whereas the current active strand is on their eastern margins. In the central Arava the centerward migration of activity was followed by outward migration with Pleistocene faulting along NNE-trending faults nearly 50 km west of the center. Largely the faulting along the DST, which began in the early–middle Miocene over a wide zone of up to 50 km, became localized by the end of the Miocene. The subsidence of fault-controlled basins, which were active in the early stage, stopped at the end of the Miocene. Later during the Plio-Pleistocene new faults were formed in the Negev west of the main transform. They indicate that another cycle has begun with the widening of the fault zone. It is suggested that the localization of faulting goes on as long as there is no change in the stress field. The stresses change because the geometry of the plates must change as they move, and consequently the localization stage ends. The fault zone is rearranged, becomes wide, and a new localization stage begins as slip accumulates. It is hypothesized that alternating periods of widening and narrowing correlate to changes of the plate boundaries, manifest in different Euler poles.  相似文献   

8.
The Kingston Peak Formation of the Pahrump Group in the Death Valley region of the Basin and Range Province, USA, is the thick (over 3 km) mixed siliciclastic–carbonate fill of a long‐lived structurally‐complex Neoproterozoic rift basin and is recognized by some as a key ‘climatostratigraphic’ succession recording panglacial Snowball Earth events. A facies analysis of the Kingston Peak Formation shows it to be largely composed of ‘tectonofacies’ which are subaqueous mass flow deposits recording cannibalization of older Pahrump carbonate strata exposed by local faulting. Facies include siltstone, sandstone and conglomerate turbidites, carbonate megabreccias (olistoliths) and related breccias, and interbedded debrites. Secondary facies are thin carbonates and pillowed basalts. Four distinct associations of tectonofacies (‘base‐of‐scarp’; FA1, ‘mid‐slope’; FA2, ‘base‐of‐slope’; FA3, and a ‘carbonate margin’ association; FA4) reflect the initiation and progradation of deep water clastic wedges at the foot of fault scarps. ‘Tectonosequences’ record episodes of fault reactivation resulting in substantial increases in accommodation space and water depths, the collapse of fault scarps and consequent downslope mass flow events. Carbonates of FA4 record the cessation of tectonic activity and resulting sediment starvation ending the growth of clastic wedges. Tectonosequences are nested within regionally‐extensive tectono‐stratigraphic units of earlier workers that are hundreds to thousands of metres in thickness, recording the long‐term evolution of the rifted Laurentian continental margin during the protracted breakup of Rodinia. Debrite facies of the Kingston Peak Formation are classically described as ice‐contact glacial deposits recording globally‐correlative panglacials but they result from partial to complete subaqueous mixing of fault‐generated coarse‐grained debris and fine‐grained distal sediment on a slope conditioned by tectonic activity. The sedimentology (tectonofacies) and stratigraphy (tectonosequences) of the Kingston Peak Formation reflect a fundamental control on local sedimentation in the basin by faulting and likely earthquake activity, not by any global glacial climate.  相似文献   

9.
岷江断裂带晚新生代逆冲推覆构造：来自钻孔的证据   总被引：6，自引：0，他引：6  
岷江断裂带由2个不同性质的断裂组成:早期岷江逆冲断裂和晚期岷江正断裂。野外地质调查和钻孔资料发现在岷江西侧山麓之下存在一套厚度大于110m的早更新世灰黑色湖相地层,三叠系灰岩逆掩在这套湖相地层之上。由此确定岷江断裂是一条西倾的逆冲断层,逆冲作用发生在中更新世之前。在中更新世时期,岷江逆冲断裂发生构造负反转,在其前缘形成一条东倾的正断层,它控制了岷江上游漳腊盆地的发育。本文认为,岷山地区现今地震活动并非受控于岷江断裂带,而可能受到虎牙断裂及岷山隆起深部滑脱构造的控制,岷江断裂带位于该深部滑脱构造的上部。进而认为逆冲—推覆构造样式可能是青藏高原东缘晚新生代造山和快速隆升的主要变形机制。  相似文献   

10.
Integrated gravitational, electrical-magnetic surveys and data processing carried out in the Sanshandao–Jiaojia area, Eastern Shandong Province, northeast China, aim to illuminate the geological characteristics of this shallow-covered area and delineate deep-seated gold prospecting targets. In this region, altogether 12 faults exert critical control on distribution of three types of Early Precambrian metamorphic rock series, i.e. those in the metamorphic rock area, in the granitic rock area underlying the metamorphic rock, and in the remnant metamorphic rock area in granites, respectively. Additionally, the faults have major effects on distribution of four Mesozoic Linglong rock bodies of granite, i.e. the Cangshang, Liangguo, Zhuqiao-Miaojia and Jincheng granites. The Sanshandao and Jiaojia Faults are two well-known regional ore-controlling faults; they have opposite dip direction, and intersect at a depth of 4500 m. Fracture alteration zones have striking geophysical differences relative to the surrounding county rocks. The two faults extend down along dip direction in a gentle wave form, and appear at some steps with different dips. These steps comprise favorable gold prospecting areas, consistent with a step metallogenic model. Six deep-seated gold-prospecting targets are delineated, i.e. Jincheng-Qianchenjia, Xiaoxizhuang-Zhaoxian, Xiyou-Wujiazhuangzi, Xiangyangling-Xinlicun, Panjiawuzi and Miaojia-Pinglidian.  相似文献   

11.
The structural deformation which produced more than 80 Jura‐type folds each of an axial length exceeding 1 km, in the Redbank Area, N.T., involved only a 360‐to 400‐m thick blanket of sediments. This thin skin of sediments and volcanic rocks, belonging to the Lower Proterozoic Tawallah Group, consists from bottom to top of the Wollogorang Formation, Gold Creek Volcanics, and Pungalina beds. Folding did not involve the underlying Settlement Creek Volcanics or Aquarium Formation. It is postulated that the cause of this detachment and shearing off along the bottom of the thin blanket of sediments is the infiltration of carbonated, K‐rich hydrothermal fluids under high pressure. This occurred during a period of igneous activity related to a postulated deep‐seated alkaline magma thought to be responsible for the many breccia pipes in the area. Thus the folds result from a décollement triggered by high fluid pressure, and from the accompanying gravity gliding and gravitational induced deformation of the thin skin of sediments along a gentle slope.  相似文献   

12.
We used satellite imagery and field data to investigate the south‐westernmost Baikal rift zone. We focus our study in the Mondy and Ikhe Ukhgun valleys, site of an Mw = 6.9 seismic event in 1950. Surface deformations are observed along the E–W‐trending Mondy strike‐slip fault and along the Ikhe Ukhgun thrust. The Mondy fault system is 80 km long and is composed of four segments 10–15 km long. These segments are characterized by subvertical planes with left‐lateral movements. The Ikhe Ukhgun thrust is 20 km long, dips 40° to the south and shows reverse movement with a left‐lateral component. These observations are consistent with the present‐day regional NNE–SSW compression and with the focal mechanism of the 1950 Mondy earthquake that was recently re‐evaluated. These features, like those observed in the Tunka basin, demonstrate a recent change of regional strain regime from transtension to transpression that we place before the Late Pleistocene.  相似文献   

13.
The Simplon Fault Zone is a late-collisional low-angle normal fault (LANF) of the Western Alps. The hanging wall shows evidence of brittle deformation only, while the footwall is characterized by a c. 1 km-thick shear zone (the Simplon Fault Zone), which continuously evolved, during exhumation and cooling, from amphibolite facies conditions to brittle-cataclastic deformations. Due to progressive localization of the active section of the shear zone, the thermal-rheological evolution of the footwall resulted in a layered structure, with higher temperature mylonites preserved at the periphery of the shear zone, and cataclasites occurring at the core (indicated as the Simplon Line). In order to investigate the weakness of the Simplon Line, we studied the evolution of brittle/cataclastic fault rocks, from nucleation to the most mature ones. Cataclasites are superposed on greenschist facies mylonites, and their nucleation can be studied at the periphery of the brittle fault zone. This is characterized by fractures, micro-faults and foliated ultracataclasite seams that develop along the mylonitic SCC′ fabric, exploiting the weak phases mainly represented by muscovite and chlorite. Approaching the fault core, both the thickness and frequency of cataclasite horizons increase, and, as their thickness increases, they become less and less foliated. The fault core itself is represented by a thicker non-foliated cataclasite horizon. No Andersonian faults or fractures can be found in the footwall damage zone and core zone, whilst they are present in the hanging wall and in the footwall further from the fault. Applying a stress model based on slip tendency, we have been able to calculate that the friction coefficient of the Simplon Line cataclasites was <0.25, hence this fault zone is absolutely weak. In contrast with other fault zones, the weakening effect of fluids was of secondary importance, since they accessed the fault zone only after an interconnected fracture network developed exploiting the cataclasite network.  相似文献   

14.
The African Rift Valleys results from Neogene-Recent breakup up the African Plate due to continental extension. Compared with the western sector, in the eastern or Gregory Rift Valley the fracturing is accompanied by a large amount of volcanic activity and, in northern Tanzania, the volcanic rocks are relatively young compared with those in Ethiopia and Kenya where the products of the earliest stages of mantle melting are buried beneath older, more-extensive volcanic formations. The volcanic rocks vary from Pliocene and early Pleistocene intraplate basalts and trachytes to late Pleistocene/Holocene nephelinites and carbonatites.  相似文献   

15.
金沙江中游巴塘县地质灾害发育特征及成灾规律分析   总被引：1，自引：0，他引：1  
金沙江流域地处青藏高原东南缘,地跨我国地势一、二阶梯过渡带,地质环境条件脆弱,属地质灾害高易发区。巴塘县位于金沙江中游,目前调查发现各类地质灾害隐患点486处,以泥石流和不稳定斜坡为主。其中泥石流151处,不稳定斜坡133处,崩塌109处,滑坡93处。通过对巴塘县地质灾害详细调查与测绘,对地质灾害的发育特征、分布规律及其影响因素进行了深入研究,结果表明：（1）巴塘县地质灾害发育类型多,点多面广、密度大,分布不均衡,成条带、群片状分布;（2）地质灾害的分布与地形地貌有密切的关系。主要沿金沙江高山峡谷区及其支沟流域的深切河谷区、丘状高原与峡谷区的地形转折带集中分布。大多数的不稳定斜坡、崩塌、滑坡发育在高程2500～3500m。（3）地质灾害受地质构造控制,时空分布差异明显。地质灾害隐患点集中沿巴塘－莫西活动构造带、金沙江构造带分布。（4）不同的岩性决定了地质灾害的类型。滑坡、不稳定斜坡主要发生在第四系松散土体中,崩塌主要发育于岩浆岩、玄武岩、火山岩、细砂岩等硬岩、较硬岩岩体;软的石英片岩、绢云片岩、绿片岩为主的岩组,岩石破碎,为泥石流提供丰富的物源。  相似文献   

16.
《Tectonophysics》2001,330(1-2):25-43
A detailed gravimetric study has been integrated with the most recent stratigraphic data in the area comprised between the Arno river and the foothills of the Northern Apennines, in northern Tuscany (central Italy). A Plio–Pleistocene basin lies in this area; its sedimentary succession can be subdivided from the bottom, in five allostratigraphic units: (1) Lower–Middle Pliocene shallow marine deposits; (2) Late Pliocene (?)–Early Pleistocene fluvio-lacustrine deposits; (3) late–Early Pleistocene–Middle Pleistocene alluvial to fluvial red conglomerates (Montecarlo Formation); (4) Middle Pleistocene alluvial to fluvial red conglomerates (Cerbaie and Casa Poggio ai Lecci Formations); (5) alluvial to fluvial deposits of Late Pleistocene age. The Bouguer anomaly map displays a strong minimum in the northeastern sector of the basin, and a gentle gradient from west to east. The map of the horizontal gradients permits to recognise three major fault zones, two of which along the southwestern and northeastern margins of the basin, and one along the southeastern edge of the Pisani Mountains. A 2.5D gravimetric modelling along a SW–NE section across the basin displays a thick wedge of sediments of density 2.25 g/cm3 (about 1700 m in the depocenter) overlying a layer of density 2.55 g/cm3, 1000 m thick, which rests on a basement of 2.72 g/cm3. The most of the sediment wedge is here referred to Upper Pliocene (?)–Lower Pleistocene, because borehole data show Pliocene marine deposits thinning northward close to the southern margin of the area. The layer below is referred to Ligurids and upper Tuscan Nappe units; the densest layer is interpreted as composed of Triassic evaporites, quartzites and Palaeozoic basement. According to Carmignani low-angle extensional tectonics began between Serravallian and early Messinian, thinning the Apennine nappe stack. At the end of Middle Pliocene, syn-rift deposition ceased in the Viareggio Basin (west of the investigated area) as demonstrated by Argnani and co-workers, and high-angle extensional tectonics migrated eastward up to the Monte Albano Ridge. A syn-rift continental sedimentary wedge developed in Late Pliocene–Early Pleistocene, until its hanging wall block was dismembered, during late Early Pleistocene, by NE-dipping faults, causing the uplift of its western portion (the Pisani Mountains). This breakup caused exhumation and erosion of Triassic units whose clastics where shed into the surrounding palaeo-Arno Valley in alluvial–fluvial deposits unconformably overlying the Lower Pleistocene syn-rift deposits. In the late Pleistocene SW–NE-trending fault systems created the steep southeastern edge of the Pisani Mountains and the resulting throw is recorded in Middle Pleistocene deposits across the present Arno Valley. This tectonic phase probably continues at present, offshore Livorno, as evidenced by the epicentres of earthquakes.  相似文献   

17.
The Galicia Interior Basin (GIB; NW Iberian Peninsula) is located near a critical transition between the subtropical (temperate) and subpolar (cold) gyres of the North Atlantic. It therefore witnesses oceanographic changes driven by global climatic events. This study reports on the recent (latest Pleistocene) sedimentary, palaeoceanographic and palaeoclimatic history of the basin. We integrated analysis of deep‐sea sediment cores retrieved from an E–W transect across the GIB. The analysis indicated three types of sedimentary processes recording glacial (Marine Isotope Stage 2–4) and deglacial events: along‐slope bottom currents (forming contourite deposits), pelagic and hemipelagic sedimentation, and gravitational dislocation. Variation in depositional patterns and sedimentation rates indicate distinctive transport (along‐slope and down‐slope) and depositional processes. These in turn reflect climatic and oceanographic drivers. We interpret changes in sea level from core evidence showing changes in sediment supply. The cores exhibited conspicuous sedimentary evidence of Heinrich events (HEs). The stratigraphic intervals associated with HEs showed significant lateral variation. We suggest that the lateral variation may result from the development of an oceanographic boundary between surface water masses with different temperature and salinity parameters or changes in surface currents which may have introduced relatively warmer water into the GIB during the last glacial period.  相似文献   

18.
The NW–SE shortening between the African and the Eurasian plates is accommodated in the eastern Betic Cordillera along a broad area that includes large N‐vergent folds and kilometric NE–SW sinistral faults with related seismicity. We have selected the best exposed small‐scale tectonic structures located in the western Huércal‐Overa Basin (Betic Cordillera) to discuss the seismotectonic implications of such structures usually developed in seismogenic zones. Subvertical ESE–WNW pure dextral faults and E–W to ENE–ESW dextral‐reverse faults and folds deform the Quaternary sediments. The La Molata structure is the most impressive example, including dextral ESE–WNW Neogene faults, active southward‐dipping reverse faults and associated ENE–WSW folds. A molar M1 assigned to Mimomys savini allows for precise dating of the folded sediments (0.95–0.83 Ma). Strain rates calculated across this structure give ～0.006 mm a?1 horizontal shortening from the Middle Pleistocene up until now. The widespread active deformations on small‐scale structures contribute to elastic energy dissipation around the large seismogenic zones of the eastern Betics, decreasing the seismic hazard of major fault zones. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

19.
Questions persist concerning the earthquake potential of the populous and industrial Lake Ontario (Canada–USA) area. Pertinent to those questions is whether the major fault zone that extends along the St. Lawrence River valley, herein named the St. Lawrence fault zone, continues upstream along the St. Lawrence River valley at least as far as Lake Ontario or terminates near Cornwall (Ontario, Canada)–Massena (NY, USA). New geological studies uncovered paleotectonic bedrock faults that are parallel to, and lie within, the projection of that northeast-oriented fault zone between Cornwall and northeastern Lake Ontario, suggesting that the fault zone continues into Lake Ontario. The aforementioned bedrock faults range from meters to tens of kilometers in length and display kinematically incompatible displacements, implying that the fault zone was periodically reactivated in the study area. Beneath Lake Ontario the Hamilton–Presqu'ile fault lines up with the St. Lawrence fault zone and projects to the southwest where it coincides with the Dundas Valley (Ontario, Canada). The Dundas Valley extends landward from beneath the western end of the lake and is marked by a vertical stratigraphic displacement across its width. The alignment of the Hamilton–Presqu'ile fault with the St. Lawrence fault zone strongly suggests that the latter crosses the entire length of Lake Ontario and continues along the Dundas Valley.The Rochester Basin, an east–northeast-trending linear trough in the southeastern corner of Lake Ontario, lies along the southern part of the St. Lawrence fault zone. Submarine dives in May 1997 revealed inclined layers of glaciolacustrine clay along two different scarps within the basin. The inclined layers strike parallel to the long dimension of the basin, and dip about 20° to the north–northwest suggesting that they are the result of rigid-body rotation consequent upon post-glacial faulting. Those post-glacial faults are growth faults as demonstrated by the consistently greater thickness, unit-by-unit, of unconsolidated sediments on the downthrown (northwest) side of the faults relative to their counterparts on the upthrown (southeast) side. Underneath the western part of Lake Ontario is a monoclinal warp that displaces the glacial and post-glacial sediments, and the underlying bedrock–sediment interface. Because of the post-glacial growth faults and the monoclinal warp the St. Lawrence fault zone is inferred to be tectonically active beneath Lake Ontario. Furthermore, within the lake it crosses at least five major faults and fault zones and coexists with other neotectonic structures. Those attributes, combined with the large earthquakes associated with the St. Lawrence fault zone well to the northeast of Lake Ontario, suggest that the seismic risk in the area surrounding and including Lake Ontario is likely much greater than previously believed.  相似文献   

20.
Quaternary Geology and Faulting in the Damxung-Yangbajain Basin   总被引：7，自引：1，他引：6  
The detailed geological mapping, conducted in the Damxung-Yangbajain basin, shows that there are many types of deposits formed since the Pliocene. The oldest sediments are formed during the Pliocene. The most prominent sediments are three sets of moraines and fluvioglacial deposits. The ESR, U-series and OSL dates indicate they are formed about 700-500 ka B.P., 250-125 ka B.P. and 75-12 ka B.P. respectively and indicate that there are three glacial periods since the mid-Pleistocene in the Nyainqentanglha Range. Along the southeast side of the Nyainqentanglha Range, the main southeast dipping fault zone which bounds the Damxung-Yangbajain Graben on its western edge was mapped. The fault zone consists of three secondary fault zones and their initiation ages that the fault zones became active gradually decrease southeastward. Prominent faulting occurred in about 700-500 ka B.P., 350-220 ka B.P., -140 ka B.P. and 70-50 ka B.P. since the mid-Pleistocene. The height of fault scarps which offset the sediments f  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号