首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
The Deep Impact oblique impact cratering experiment   总被引：1，自引：0，他引：1  
The Deep Impact probe collided with 9P Tempel 1 at an angle of about 30° from the horizontal. This impact angle produced an evolving ejecta flow field very similar to much smaller scale oblique-impact experiments in porous particulate targets in the laboratory. Similar features and phenomena include a decoupled vapor/dust plume at the earliest times, a pronounced downrange bias of the ejecta, an uprange “zone of avoidance” (ZoA), heart-shaped ejecta ray system (cardioid pattern), and a conical (but asymmetric) ejecta curtain. Departures from nominal cratering evolution, however, provide clues on the nature of the impact target. These departures include: fainter than expected flash at first contact, delayed emergence of the self-luminous vapor/dust plume, uprange-directed plume, narrow early-time uprange ray followed by a late-stage uprange plume, persistence of ejecta asymmetries (and the uprange ZoA) throughout the approach sequence, emergence of a downrange ZoA at late times, detachment of uprange curved rays, very long lasting non-radial ejecta rays, and high-angle ejecta plume lasting over the entire encounter. The first second of crater formation most closely resembles the consequences of a highly porous target, while later evolution indicates that the target may be layered as well. Experiments also reveal that impacts into highly porous targets produce a vapor/dust plume directed back up the incoming trajectory. This uprange plume is attributed to cavitation within a narrow penetration funnel. The observed lateral expansion speed of the initial vapor plume downrange provides an estimate for the total vaporized mass equal to ∼5mp (projectile masses) of water ice or 6mp of CO2. The downrange plume speed is consistent with the gas expansion added to the downrange horizontal component of the DI probe. Based on high-speed spectroscopy of experimental impacts, the observed delay in brightening of the DI plume may be the result of delayed condensation of carbon, in addition to silicates. Observed molecular species in the initial self-luminous vapor plume likely represent recombination products from completely dissociated target materials. The crater produced by the impact can be estimated from Earth-based observations of total ejected mass to be 130-220 m in diameter. This size range is consistent with a 220 m-diameter circular feature at the point of impact visible in highly processed, deconvolved HRI images. The final crater, however, may resemble an inverted sombrero-hat, with a deep central pit surrounded by a shallow excavation crater. Excavated distal material observed from the Earth was likely from the upper few meters contrasted with ballistic ejecta observed from the DI flyby, which included deep materials (10-30 m) within the diffuse plume above the crater and shallower (5-10 m) materials within the ejecta curtain.  相似文献   

2.
The presence of dust at high redshift requires efficient condensation of grains in supernova (SN) ejecta, in accordance with current theoretical models. Yet observations of the few well-studied supernovae (SNe) and supernova remnants (SNRs) imply condensation efficiencies which are about two orders of magnitude smaller. Motivated by this tension, we have (i) revisited the model of Todini & Ferrara for dust formation in the ejecta of core collapse SNe, and (ii) followed, for the first time, the evolution of newly condensed grains from the time of formation to their survival – through the passage of the reverse shock – in the SNR. We find that  0.1–0.6  M⊙  of dust form in the ejecta of 12–40 M⊙ stellar progenitors. Depending on the density of the surrounding interstellar medium, between 2 and 20 per cent of the initial dust mass survives the passage of the reverse shock, on time-scales of about  4–8 × 104  yr  from the stellar explosion. Sputtering by the hot gas induces a shift of the dust size distribution towards smaller grains. The resulting dust extinction curve shows a good agreement with that derived by observations of a reddened QSO at   z = 6.2  . Stochastic heating of small grains leads to a wide distribution of dust temperatures. This supports the idea that large amounts (∼0.1 M⊙) of cold dust  ( T ∼ 40   K)  can be present in SNRs, without being in conflict with the observed infrared emission.  相似文献   

3.
Starting with the assumption that the micron-sized particles which make up the bright Jovian ring are fragments of erosive collisions between micrometeoroid projectiles and large parent bodies, a physical model of the ring is calculated. The physics of high-velocity impacts leads to a well-defined size distribution for the ejecta, the optical properties of which can be compared with observation. This gives information on the ejecta material (very likely silicates) and on the maximum size of the projectiles, which turns out to be about 0.1 μm. The origin of these projectiles is discussed, and it is concluded that dust particles ejected in volcanic activity from Io are the most likely source. The impact model leads quite naturally to a distribution in ejecta sizes, which in turn determines the structure of the ring. The largest ejecta form the bright ring, medium-sized ejecta form a disk extending all the way to the Jovian atmosphere, and the small ejecta form a faint halo, the structure of which is dominated by electromagnetic forces. In addition to the Io particles, interaction with interplanetary micrometeoroids is also considered. It is concluded that μm-sized ejecta from this source have ejection velocities which are several orders of magnitude too large, and thus cannot contribute significantly to the observed bright ring. However, the total mass ejection rate is significant. Destruction of these ejecta by the Io particles may provide additional particles for the halo.  相似文献   

4.
《Planetary and Space Science》2006,54(9-10):1014-1023
Faint rings of micrometre-sized dust particles embrace many planets in the Solar system. As a rule, they are replenished by ejecta from embedded atmosphereless moons. On a number of occasions, the ejecta are generated by hypervelocity meteoroid impacts into the moons. Small ejecta fragments are then swiftly shifted into rings by an array of non-gravitational forces, e.g. radiation pressure or plasma drag. A significant fraction of ejecta mass, however, is contained in relatively big, multi-micrometre fragments which are subject to gravity only. Having escaped from the satellite, they stay close to its orbit and form a belt around planet. This belt is itself a source of ring dust through collisional disruption of its particles. Here the contributions of belts to the respective rings are estimated for selected satellites of Jupiter and Saturn. The belts under review could supply substantially more dust to rings than the direct ejecta from satellites and should be taken into account when estimating ring dust budgets. The belts are very difficult to observe, however, and some of them remain a theoretical proposition. We find an appealing evidence for the belts due to Amalthea and Thebe around Jupiter, and for the belt due to Enceladus around Saturn.  相似文献   

5.
Dust formation in primordial Type II supernovae   总被引：1，自引：0，他引：1  
We have investigated the formation of dust in the ejecta of Type II supernovae (SNe), mostly of primordial composition, to answer the question of where the first solid particles are formed in the Universe. However, we have also considered non-zero progenitor metallicity values up to Z = Z⊙ . The calculations are based on standard nucleation theory, and the scheme has been tested for the first time on the well-studied case of SN1987A, yielding results that are in agreement with the available data. We find that: (i) the first dust grains are predominantly made of silicates, amorphous carbon (AC), magnetite and corundum; and (ii) the largest grains are the AC ones, with sizes around 300 Å, whereas the other grain types have smaller radii, around 10–20 Å . The grain size distribution depends somewhat on the thermodynamics of the ejecta expansion, and variations in the results by a factor ≈2 might occur within reasonable estimates of the relevant parameters. Also, and for the same reason, the grain size distribution is essentially unaffected by metallicity changes. The predictions on the amount of dust formed are very robust: for Z =0 , we find that SNe with masses in the range (12–35) M⊙ produce about 0.08 M⊙≲ M d≲0.3 M⊙ of dust per supernova. The above range increases by roughly three times as the metallicity is increased to solar values. We discuss the implications and the cosmological consequences of the results.  相似文献   

6.
We study central collisions between millimeter-sized dust projectiles and centimeter-sized dust targets in impact experiments. Target and projectile are dust aggregates consisting of micrometer-sized SiO2 particles. Collision velocities range up to 25 m/s. The general outcome of a collision strongly depends on the impact velocity. For collisions below 13 m/s rebound and a small degree of fragmentation occur. However, at higher collision velocities up to 25 m/s approximately 50% of the mass of the projectile rigidly sticks to the target after the collision. Thus, net growth of a body is possible in high speed collisions. This supports the idea that planetesimal formation via collisional growth is a viable mechanism at higher impact velocities. Within our set of parameters the experiments even suggest that higher impact velocities might be preferable for growth in collisions between dusty bodies. For the highest impact velocities most of the ejecta is within small dust aggregates about 500 μm in size. In detail the size distribution of ejected dust aggregates is flat for very small particles smaller than 500 μm and follows a power law for larger ejected dust aggregates with a power of −5.6±0.2. There is a sharp upper cut-off at about 1 mm in size with only a few particles being slightly larger. The ejection angle is smaller than 3° with respect to the target surface. These fast ejecta move with 40±10% of the impact velocity.  相似文献   

7.
We have examined single dust particle dynamics in a plasma sheath near the surface of solid bodies in space, considering conditions which resemble those of planetary system bodies, when photoelectric effect can be neglected. The forces on the dust particles are assumed to be from the electric field in the sheath and from gravitation only. As the dust particles will charge negatively in the sheath, these forces will act in opposite directions and may balance.The charge delay of a moving dust particle is responsible for many of the interesting dynamical properties, and we show that for a stationary plasma, dust motion is unstable to about one Debye length out from the surface of the solid body. This part of the sheath will therefore be devoid of dust particles as they will either fall down, escape completely from the solid body or collect and make damped oscillations at stable positions in the outer part of the sheath. With increasing plasma bulk speed towards the surface, the inner unstable part of the sheath will decrease in thickness.The sources for the dust in the sheath are assumed to be mainly ejecta from meteorites and micrometeorites, but may also, for the smallest solid bodies, be from electrostatic levitation of very small dust particles. We have for different sizes of solid bodies calculated the sizes of ejecta that can be floated in the sheath. For the solar wind plasma, the suspended dust particles range from less than 1 m for the Moon to about 80 m for an asteroid with radius 1 km. These particles create a dust atmosphere.The results in this paper hold when the dust particle density is so low that the charges on the dust particles do not contribute significantly to the total space charge; a higher density will lead to a modification of the sheath.Our calculations show that ejecta below a certain size will be accelerated in the sheath and totally escape from the body even if they have near zero initial vertical velocity, while ejecta above this size will need a much larger velocity to escape. This is especially significant for the small solid bodies (radius of order km and less) which will therefore act as important sources of micronsized dust. This could be of significance for the dust production and the size distribution of dust in planetary ring systems.  相似文献   

8.
We present near- (NIR) and mid-infrared (MIR) photometric data of the Type Ibn supernova (SN) 2006jc obtained with the United Kingdom Infrared Telescope (UKIRT), the Gemini North Telescope and the Spitzer Space Telescope between days 86 and 493 post-explosion. We find that the IR behaviour of SN 2006jc can be explained as a combination of IR echoes from two manifestations of circumstellar material. The bulk of the NIR emission arises from an IR echo from newly condensed dust in a cool dense shell (CDS) produced by the interaction of the ejecta outward shock with a dense shell of circumstellar material ejected by the progenitor in a luminous blue variable (LBV)-like outburst about two years prior to the SN explosion. The CDS dust mass reaches a modest  3.0 × 10−4 M⊙  by day 230. While dust condensation within a CDS formed behind the ejecta inward shock has been proposed before for one event (SN 1998S), SN 2006jc is the first one showing evidence for dust condensation in a CDS formed behind the ejecta outward shock in the circumstellar material. At later epochs, a substantial and growing contribution to the IR fluxes arises from an IR echo from pre-existing dust in the progenitor wind. The mass of the pre-existing circumstellar medium (CSM) dust is at least  ∼8 × 10−3 M⊙  . This paper therefore adds to the evidence that mass-loss from the progenitors of core-collapse SNe could be a major source of dust in the Universe. However, yet again, we see no direct evidence that the explosion of an SN produces anything other than a very modest amount of dust.  相似文献   

9.
Qian  Bochen  Tao  Jun  Gu  Minfeng 《Earth, Moon, and Planets》2000,88(2):61-74
We report the observation of an outburst of comet Hale–Bopp (C/1995 O1) happened on September 10–11, 1996, carried by the 1.56 m telescope of Shanghai Astronomical Observatory. Two ejecta were found in CCD images during the outburst. According to the positions of ejecta, we discuss the motion of the ejecta considering dust particles are subjected to the gravity and the Solar radiation pressure, and conclude that the mean radii of dust grains in the ejecta were about submicron-sized. So the observed X-ray emission are most likely produced by small size particles scattering the Solar X-ray. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

10.
This paper focuses on tenuous dust clouds of Jupiter's Galilean moons Europa, Ganymede and Callisto. In a companion paper (Srem?evi? et al., Planet. Space Sci. 51 (2003) 455-471) an analytical model of impact-generated ejecta dust clouds surrounding planetary satellites has been developed. The main aim of the model is to predict the asymmetries in the dust clouds which may arise from the orbital motion of the parent body through a field of impactors. The Galileo dust detector data from flybys at Europa, Ganymede and Callisto are compatible with the model, assuming projectiles to be interplanetary micrometeoroids. The analysis of the data suggests that two interplanetary impactor populations are most likely the source of the measured dust clouds: impactors with isotropically distributed velocities and micrometeoroids in retrograde orbits. Other impactor populations, namely those originating in the Jovian system, or interplanetary projectiles with low orbital eccentricities and inclinations, or interstellar stream particles, can be ruled out by the statistical analysis of the data. The data analysis also suggests that the mean ejecta velocity angle to the normal at the satellite surface is around 30°, which is in agreement with laboratory studies of the hypervelocity impacts.  相似文献   

11.
The Deep Impact encounter with the Jupiter family Comet 9P/Tempel 1 on UT 2005 July 4 was observed at high spectral resolving power (λ/δλ∼25,000) using the cross-dispersed near-infrared echelle spectrometer (NIRSPEC) at Keck-2. We report the temporal evolution of parent volatiles and dust (simultaneously measured) resulting from the event. Column abundances are presented for H2O and C2H6 beginning 30 min prior to impact (T−30) and ending 50 min following impact (T+50), and for H2O and HCN from T+50 until T+96, in time steps of approximately 6 min post-impact. The ejecta composition was revealed by an abrupt increase in H2O and C2H6 near T+25. This showed C2H6/H2O to be higher than its pre-impact value by a factor 2.4±0.5, while HCN/H2O was unchanged within the uncertainty of the measurements. The mixing ratios for C2H6 and HCN in the ejecta agree with those found in the majority of Oort cloud comets, perhaps indicating a common region of formation. The expanding dust plume was tracked by continuum measurements, both through the 3.5-μm spectral continuum and through 2-μm images acquired with the SCAM slit-viewing camera, and each showed a monotonic increase in continuum intensity following impact. A Monte Carlo model that included dust opacity was applied to the dust coma, and its parameters were constrained by observations; the simulated continuum intensities reproduced both spectral and SCAM data. The relatively sudden appearance of the volatile ejecta signature is attributed to heating of icy grains (perhaps to a threshold temperature) that are decreasingly shadowed by intervening (sunward) dust particles in an optically thick ejecta plume, perhaps coupled with an accelerated decrease in dust optical depth near T+25.  相似文献   

12.
Tenuous dust clouds of Jupiter's Galilean moons Io, Europa, Ganymede and Callisto have been detected with the in-situ dust detector on board the Galileo spacecraft. The majority of the dust particles have been sensed at altitudes below five radii of these lunar-sized satellites. We identify the particles in the duut clouds surrounding the moons by their impact direction, impact velocity, and mass distribution. Average particle sizes are between 0.5 and 1 μm, just above the detector threshold, indicating a size distribution with decreasing numbers towards bigger particles. Our results imply that the particles have been kicked up by hypervelocity impacts of micrometeoroids onto the satellites' surfaces. The measured radial dust density profiles are consistent with predictions by dynamical modeling for satellite ejecta produced by interplanetary impactors (Krivov et al., 2003, Planet. Space Sci. 51, 251-269), assuming yield, mass and velocity distributions of the ejecta from laboratory measurements. A comparison of all four Galilean moons (data for Ganymede published earlier; Krüger et al., 2000, Planet. Space Sci. 48, 1457-1471) shows that the dust clouds of the three outer Galilean moons have very similar properties and are in good agreement with the model predictions for solid ice-silicate surfaces. The dust density in the vicinity of Io, however, is more than an order of magnitude lower than expected from theory. This may be due to a softer, fluffier surface of Io (volcanic deposits) as compared to the other moons. The log-log slope of the dust number density in the clouds vs. distance from the satellite center ranges between −1.6 and −2.8. Appreciable variations of number densities obtained from individual flybys with varying geometry, especially at Callisto, are found. These might be indicative of leading-trailing asymmetries of the clouds due to the motion of the moons with respect to the field of impactors.  相似文献   

13.
We suggest that Pluto and Charon are immersed in a tenuous dust cloud. The cloud consists of ejecta from Pluto and—especially—Charon, released from their surfaces by impacts of micrometeoroids originating from Edgeworth-Kuiper belt objects. The motion of the ejected grains is dominated by the gravity of Pluto and Charon, which determines a pear-shape of the densest part of the cloud. While the production rates of escaping particles from both sides are comparable, the lifetimes of the Charon particles inside the Hill sphere of Pluto-Charon with respect to the Sun are much longer than of the Pluto ejecta, so that the cloud is composed predominantly of Charon grains. The dust cloud is dense enough to be detected with an in situ dust detector onboard a future space mission to Pluto. The cloud's maximum optical depth of τ≈3×10−11 is, however, too low to allow remote sensing observations.  相似文献   

14.
We carried out 16 collision experiments in the drop tower in Bremen, Germany. Dust projectiles and solid projectiles of several mm in size impacted a dust target 5 cm in depth and width at velocities between 3.5 and 21.5 m/s. For solid impactors we found significant mass loss on the front (impact) side of the target. Mass loss depended on the impact velocity and projectile type (solid sphere or dust) and was up to 35 times the projectile mass for targets of the lowest tensile strength. Typical fragment velocities on the front side of the target ranged from 3 to 12 cm/s. The ejecta velocity was independent of the impact velocity but it increased with projectile mass. On the back side of the target (opposite to the impact side) mass was ejected from the target above a certain threshold impact velocity. Ejection velocity on the back side increased with impact velocity and is larger for solid projectiles than for dust projectiles. In one case a slightly stronger target gained mass in a slow dust-dust collision. We verified that collisions of dust projectiles with compact, very strong dust targets lead to a more massive target accreting part of the projectile. Applied to planetesimal formation, the experiments suggest that the maximum possible ejecta velocity from a body of several cm in size after a collision is small. Ejecta were slow enough that they were reaccreted by means of gas flow if large pores were part of the body's morphology. While very weak bodies cannot grow in the primary collision at the given velocities, this can lead to growth by secondary collisions. Slight compression, which could result from preceding collisions, might lead to immediate growth of a body in slow collisions by adding projectile mass.  相似文献   

15.
We present the first in situ direct measurement of the composition of particles in Saturn's rings. The Cassini cosmic dust analyser (CDA) measured the mass spectra of nearly 300 impacting dust particles during the 2004 October E ring crossing. An initial interpretation of the data shows that the particles are predominantly water ice, with minor contributions from possible combinations of silicates, carbon dioxide, ammonia, molecular nitrogen, hydrocarbons and perhaps carbon monoxide. This places constraints on both the composition of Enceladus, the main source of the E ring, as well as the grain formation mechanisms.  相似文献   

16.
恒星尘埃的实验室研究--实验天体物理学   总被引：1，自引：0，他引：1  
原始球粒陨石含有来自恒星的微小固体颗粒(微米级),这些尘埃的同位素组成与太阳系物质截然不同,它们是目前唯一能直接获得的恒星固体样品．已发现的恒星尘埃有金刚石、石墨、碳化硅、刚玉、尖晶石、氮化物、和硅酸盐等,它们的母体恒星包括红巨星,AGB恒星、新星和超新星．对恒星尘埃的研究,使得更深入地了解星系的化学演化历史、恒星内部的核反应和湍流机制、恒星大气中尘埃的形成、星际介质物理现象等．恒星尘埃把天体物理领域延伸到了微观世界,它有机地结合了地球化学实验技术和天体物理理论,开辟了一门崭新的天文学分支实验天体物理学．  相似文献   

17.
Abstract– We have shown in laboratory experiment that hypervelocity impacts on a solar cell produce ejecta that can be captured on aluminum (Al 1100) foil or in low density (33 kg m?3) aerogel. The origin of the secondary impacts can be determined by either analysis of the residue in the craters in the foils (which preserve an elemental signature of the solar cell components) or by their pointing direction for tracks in the aerogel (which we show align with the impact direction to ± 0.4°). This experimental evidence explains the observations of the NASA Stardust mission which has reported that the majority of tracks in the aerogel collector used to collect interstellar dust actually point at the spacecraft’s solar panels. From our results, we suggest that it should also be possible to recognize secondary ejecta craters in the Stardust mission aluminum foils, also used as dust sampling devices during the mission.  相似文献   

18.
We show that plowing of the lunar and mercurian regoliths by dense meteoroid swarms (the remnants of degassed comet nuclei) can be considered as the most probable mechanism of swirl formation. Frequently discussed mechanical and thermal effects of coma gas in cometary encounters with the Moon or Mercury are shown to be negligible as compared to those of the impact of a compact cometary nucleus. The result of such an impact does not differ substantially from that of denser impactors, so impacts of comets with compact nuclei can hardly be the mechanism of swirl formation. On the other hand, the projectile swarm consisting of numerous fragments of previously disrupted cometary nucleus produces many small craters and ejecta in a large area. The particles of the ejecta go through numerous collisions with each other. This may result in formation of the characteristic swirl pattern and dust component of the regolith. This can also decrease surface micro-roughness, which is consistent with photometric observations. Regolith plowing to depths up to a few meters excavates the immature regolith to the surface but cannot noticeably change the initial chemical composition of the upper layers in the area of swarm fall. This is generally in agreement with the results obtained from Clementine spectral data. Swirls are expected to be more numerous on Mercury due to more frequent swarm encounters and more dense clouds of debris in the vicinity of the Sun.  相似文献   

19.
We have radically re-assessed the conditions required for the formation and growth of carbon grains in the ejecta of novae. The stability and hence the ultimate fate of the grains is primarily determined by the degree to which they are annealed by the nova's ultraviolet radiation field.  相似文献   

20.
Abstract– Simulants of lunar dust are needed when researching the lunar environment. However, unlike the true lunar dust, today’s simulants do not contain nanophase iron. Two different processes have been developed to fabricate nanophase iron to be used as part of a lunar dust simulant. (1) The first is to sequentially treat a mixture of ferric chloride, fluorinated carbon, and soda lime glass beads at about 300 °C in nitrogen, at room temperature in air, and then at 1050 °C in nitrogen. The product includes glass beads that are gray in color, can be attracted by a magnet, and contains α‐iron nanoparticles (which seem to slowly lose their lattice structure in ambient air during a period of 12 months). This product may have some similarity to the lunar glassy agglutinate, which contains FeO. (2) The second is to heat a mixture of carbon black and a lunar simulant (a mixed metal oxide that includes iron oxide) at 1050 °C in nitrogen. This process simulates lunar dust reactions with the carbon in a micrometeorite at the time of impact. The product contains a chemically modified simulant that can be attracted by a magnet and has a surface layer whose iron concentration increased during the reaction. The iron was found to be α‐iron and Fe3O4 nanoparticles, which appear to grow after the fabrication process. This growth became undetectable after 6 months of ambient air storage, but may last for several years or longer.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号