首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Shear-wave polarization anisotropy in the Pacific Basin   总被引：1，自引：0，他引：1  
Summary. Inversion of 295. Love- and Rayleigh-wave phase travel times across the Pacific Basin has yielded a structure which has a channel that is anisotropic with respect to the polarization of shear waves. The velocity of SH waves is approximately 4.24 km/s, and the velocity of SV waves is approximately 4.10 km/s in the low-velocity channel. The lid to the channel is isotropic with respect to the polarization of S waves and the velocity is approximately 4.60 km/s. The lid to the low-velocity channel increases in thickness with lithospheric age at the expense of the channel, and its thickness is apparently still increasing at a sea-floor age of 150 Myr.
These results can be explained in terms of a model with both randomly-and preferentially-oriented, liquid-filled cracks in the channel. In the model, it is assumed that the liquid-filled cracks are due to partial melting in the channel, and that any preferred orientation is caused by a shear-flow gradient resulting from differential motion between the lid and the deeper parts of the mantle.  相似文献   

2.
Summary. Seismic investigations using shear-wave and converted wave techniques show that very often reflected PS - and SS -waves have anomalous polarizations ( accessory components ). This phenomenon cannot be explained in terms of isotropic models with dipping boundaries. Computations of synthetic seismograms of reflected PS - and SS -waves were made for different models of transversely isotropic media with dipping anisotropic symmetry axes not normal to the boundaries. Synthetic seismograms were computed by ray techniques using an optimization algorithm to construct all rays arriving at a given receiver. These computations indicate that accessory components arise when the medium above the boundary is anisotropic, where they are caused by the constructive interference of qSV - and qSH -waves. If a low-velocity layer is present, displacement vectors of both waves have horizontal projections which are approximately orthogonal. The algorithm for wave separation is presented and some results of its use are given.  相似文献   

3.
Shear-wave splitting from local deep earthquakes is investigated to clarify the volume and the location of two anisotropic bodies in the mantle wedge beneath central Honshu, Japan. We observe a spatial variation in splitting parameters depending on the combination of sources and receivers, nearly N–S fast in the northern region, nearly E–W fast in the southern region and small time delays in the eastern region. Using forward modelling, two models with 30 and 10 per cent anisotropy are tested by means of a global search for the locations of anisotropic bodies with various volumes. The optimum model is obtained for 30 per cent anisotropy, which means a 5 per cent velocity difference between fast and slow polarized waves. The northern anisotropic body has a volume of 1.00° (longitude) × 0.5° (latitude) × 75 km (depth), with the orientation of the symmetry axis being N20°E. The southern anisotropic body has a volume of 1.25° × 1.25° × 100 km with the symmetry axis along N95°E. Our results show that the anisotropic bodies are located in low-velocity and low- Q regions of the mantle. This, together with petrological data and the location of volcanoes in the arc, suggests that the possible cause of the anisotropy is the preferred alignment of cracks filled with melt.  相似文献   

4.
A network of nine broad-band seismographs was operated from March to May 1994 to study the propagation of seismic waves across the Mexican Volcanic Belt (MVB) in the region of the Valley of Mexico. Analysis of the data from the network reveals an amplification of seismic waves in a wide period band al the stations situated in the southern part of the MVB.
The group velocities of the fundamental mode of the Rayleigh wave in the period range 2–13 s are found to be lower in the southern part of the MVB than in its northern part and in the region south of the MVB. The inversion of dispersion curves shows that the difference in group velocities is due to the presence of a superficial low-velocity layer (with an average S -wave velocity of 1.7 km s-1 and an average thickness of 2 km) beneath the southern part of the MVB. This low-velocity zone is associated with the region of active volcanism.
Numerical simulations show that this superficial low-velocity layer causes a regional amplification of 8–10 s period signals, which is of the same order as the amplification measured from the data. This layer also increases the signal duration significantly because of the dispersion of the surface waves. These results confirm the hypothesis of Singh et al. (1995), who suggested that the regional amplification observed in the Valley of Mexico is due to the anomalously low shear-wave velocity of the shallow volcanic rocks in the southern MVB  相似文献   

5.
High-frequency body waves recorded by a temporary seismic array across the surface rupture trace of the 1992 Landers, California, earthquake were used to determine fault-zone structures down to the seismogenic depth. We first developed a technique to use generalized ray theory to compute synthetic seismograms for arbitrarily oriented tabular low-velocity fault-zone models. We then generated synthetic waveform record sections of a linear array across a vertical fault zone. They show that both arrival times and waveforms of P and S waves vary systematically across the fault due to transmissions and reflections from boundaries of the low-velocity fault zone. The waveform characteristics and arrival-time patterns in the record sections allow us to locate the boundaries of the fault zone and to determine its P - and S -wave velocities independently as well as its depth extent. Therefore, the trade-off between the fault-zone width and velocities can be avoided. Applying the method to the Landers waveform data reveals a low-velocity zone with a width of 270–360 m and a 35–60 per cent reduction in P and S velocities relative to the host rock. The analysis suggests that the low-velocity zone extends to a depth of ∼7 km. The western boundary of the low-velocity zone coincides with the observed main surface rupture trace.  相似文献   

6.
VSP data collected in the KTB (Germany) borehole to a depth of 8.5 km in 1999 show a surprising spectral modulation of the downgoing wavefield. After filtering the data with the singular value decomposition technique it was found that below about 6.2 km there are two depth intervals where the modulation can be explained in terms of a basic wavelet plus two weighted and delayed copies of that wavelet, with the delay for each wavelet remaining almost constant in each interval. The boundary between the two intervals is at about 7.25 km depth and above and below this depth the delay for the second wavelet is almost the same, while the delay for the third wavelet is significantly different. Neither the modulation nor its depth variation are source related and cannot be explained in terms of multiple reflections in a subhorizontal low-velocity layer. On the other hand, finite difference synthetic data show that subvertical layering (which is prevalent in the borehole area) provides a mechanism that can explain the observations. This mechanism has analogies with the generation of the standard refracted (i.e. head) waves. When a plane wave front propagates perpendicular to the boundaries of a vertical low-velocity layer surrounded by two vertical high-velocity layers, refracted wave fronts are generated in the low-velocity layer, which in turn generate secondary wave fronts in the high-velocity layers. These wave fronts trail the primary wave fronts by a constant delay whose magnitude has a simple dependence on the thickness of the low-velocity layer and the velocities involved. This process creates multipath arrivals that in geological settings with steeply inclined and faulted layers may appear and disappear rather abruptly, which may contribute to a scattered appearance of the wavefield.  相似文献   

7.
Summary. Three-component VSP borehole seismograms taken in the vicinity of an active normal fault in California show strong systematic shear-wave splitting that increases with proximity to the fault. Using Červený's method of characteristics for ray tracing in anisotropic heterogeneous media and Hudson's formulation of elastic constants for media-bearing aligned fractures, we have fitted a suite of P, SV and SH hanging-wall and foot-wall travel times with a simple model of aligned fractures flanking the fault zone. The dominant fracture set is best modelled as parallel to the fault plane and increasing in density with approach to the fault. The increase in fracture density is non-uniform (power law or Gaussian) with respect to distance to the fault. Although the hanging-wall and the foot-wall rock are petrologically the same unit, the fracture halo is more intense and extensive in the hanging wall than in the foot wall. Upon approach to the fault plane, the fracture density or fracture-density gradient becomes too great for the seismic response to be computed by Hudson–Červený procedures (the maximum fracture density that can be modelled is about 0.08). Within this 25 m fracture domain it appears more useful to model the fault and near field fractures as a low-velocity waveguide. We observe production of trapped waves within the confines of the intense fracture interval.  相似文献   

8.
Earthquake arrival time data from a 36-station deployment of portable seismographs on the Raukumara Peninsula have been used to determine the 3-D Vp and Vp/Vs structure of this region of shallow subduction. A series of inversions have been performed, starting with an inversion for 1-D structure, then 2-D, and finally 3-D. This procedure ensures a smooth regional model in places of low resolution. The subducted plate is imaged as a northwest-dipping feature, with Vp consistently greater than 8.5  km  s−1 in the uppermost mantle of the plate. Structure in the overlying plate changes significantly along strike. In the northeast, there is an extensive low-velocity zone in the lower crust underlying the most rapidly rising part of the Raukumara Range. It is bounded on its arcward side by an upwarp of high velocity. A viable explanation for the low-velocity zone is that it represents an accumulation of underplated subducted sediment, while serpentinization of the uppermost mantle may be responsible for the adjacent high-velocity region. The low-velocity zone decreases and the adjacent high-velocity region is less extensive in the southwest. This change is interpreted to be related to a change in the thickness of the crust of the overlying plate. In the northeast the crust is thinner, and subducted sediment ponds against relatively strong uppermost mantle, while in the southwest the crust is thicker, and the relatively weak lower crust allows sediment subduction to greater depths. A narrow zone of high Vp/Vs parallels the shallow part of the plate interface. This suggests elevated fluid pressures, with the distribution of earthquakes about this zone further suggesting that these pressures may be close to lithostatic. The plate interface at 20  km depth beneath the Raukumara Peninsula may thus be a closed system for fluid flow, similar to that seen at much shallower depths in other subduction décollements.  相似文献   

9.
Several years of broad-band teleseismic data from the GRSN stations have been analysed for crustal structure using P -to- S converted waves at the crustal discontinuities. An inversion technique was developed which applies the Thomson-Haskell formalism for plane waves without slowness integration. The main phases observed are Moho conversions, their multiples in the crust, and conversions at the base of the sediments. The crustal thickness derived from these data is in good agreement with results from other studies. For the Gräfenberg stations, we have made a more detailed comparison of our model with a previously published model obtained from refraction seismic experiments. The refraction seismic model contains boundaries with strong velocity contrasts and a significant low-velocity zone, resulting in teleseismic waveforms that are too complicated as compared to the observed simple waveforms. The comparison suggests that a significant low-velocity zone is not required and that internal crustal boundaries are rather smooth.  相似文献   

10.
Summary. The upper boundary of the descending oceanic plate is located by using PS -waves (converted from P to S at the boundary) in the Tohoku District, the north-eastern part of Honshu, Japan. the observed PS-P time data are well explained by a two-layered oceanic plate model composed of a thin low-velocity upper layer whose thickness is less than 10 km and a thick high-velocity lower layer; the upper and lower layers respectively have 6 per cent lower and 6 per cent higher velocity than the overriding mantle. the estimated location of the upper boundary is just above the upper seismic plane of the double-planed deep seismic zone. This result indicates that events in the upper seismic plane, at least in the depth range from 60 to 150 km, occur within the thin low-velocity layer on the surface of the oceanic plate.  相似文献   

11.
Slab low-velocity layer in the eastern Aleutian subduction zone   总被引：1，自引：0，他引：1  
Local earthquakes in the vicinity of the Alaskan Peninsula's Shumagin Islands often produce arrivals between the main P and S arrivals not predicted by standard traveltime tables. Based on traveltime and polarization, these anomalous arrivals appear to be from P -to- S conversions at the surface of the subducted Pacific Plate beneath the recording stations. The P -to- S conversion occurs at the top of a low-velocity layer which extends to at least 150 km depth and is 8 ˜ 2 per cent slower than the overlying mantle. The slab is ˜ 7 per cent faster than the mantle. The low-velocity layer contains the foci of the earthquakes in the upper plane of the double seismic zone and confines PS ray paths to lie within it. These observations indicate that layered structures persist to positions well past the surface location of the volcanic front. Reactions forming high-pressure minerals do not yield slab-like velocities until beyond the point that subduction zone magma genesis occurs. If the subducted oceanic crust forms the layer, it is subducted essentially intact.  相似文献   

12.
We present a 3-D radially anisotropic S velocity model of the whole mantle (SAW642AN), obtained using a large three component surface and body waveform data set and an iterative inversion for structure and source parameters based on Non-linear Asymptotic Coupling Theory (NACT). The model is parametrized in level 4 spherical splines, which have a spacing of ∼ 8°. The model shows a link between mantle flow and anisotropy in a variety of depth ranges. In the uppermost mantle, we confirm observations of regions with   VSH > VSV   starting at ∼80 km under oceanic regions and ∼200 km under stable continental lithosphere, suggesting horizontal flow beneath the lithosphere. We also observe a   VSV > VSH   signature at ∼150–300 km depth beneath major ridge systems with amplitude correlated with spreading rate for fast-spreading segments. In the transition zone (400–700 km depth), regions of subducted slab material are associated with   VSV > VSH   , while the ridge signal decreases. While the mid-mantle has lower amplitude anisotropy (<1 per cent), we also confirm the observation of radially symmetric   VSH > VSV   in the lowermost 300 km, which appears to be a robust conclusion, despite an error in our previous paper which has been corrected here. The 3-D deviations from this signature are associated with the large-scale low-velocity superplumes under the central Pacific and Africa, suggesting that   VSH > VSV   is generated in the predominant horizontal flow of a mechanical boundary layer, with a change in signature related to transition to upwelling at the superplumes.  相似文献   

13.
This paper presents the development of a 2.5-D simulation technique for acoustic wave propagation in media with variable density and velocity. A comparative study of the 2-D and 2.5-D responses of a model reveals the spatially and temporally damped nature of the 2.5-D acoustic wave equations. The simulated results for constant and variable density models show that the density variation affects only the reflectivity of the layer. The computational cost for variable density models is 2.17 and 2.26 times that for constant density models for the 2.5-D and 2-D cases, respectively. Furthermore, the 2.5-D computational cost in the time domain is only about 10–15 per cent more than that for two dimensions, so this modest increase in computational cost can avoid the exorbitant 3-D computational cost.
Snapshots for a crosshole geometry were computed at various times in order to study the effect of heterogeneity on the amplitude and shape of the wave front. Extensive analysis of an oil-bearing reservoir with and without the inclusion of a gas zone was performed using a point source as well as multiple sources. In addition, the effects of the thickness of a low-velocity layer (oil-bearing) and of the location of the source have been studied. It is concluded from the numerical response that the waveguide action of the low-velocity layer depends on its thickness in terms of the dominant wavelength. Trapping of waves was not observed when the source was outside the low-velocity layer. Furthermore, the presence of heterogeneity in the low-velocity layer contributes considerably to the leakage of energy in the adjacent layers due to scattering/diffraction. It was found that, in the 2.5-D numerical simulation, the stability condition and the requirement of the number of grid points per wavelength to avoid grid dispersion are the same as for the 2-D case.  相似文献   

14.
We present the first results of a high-resolution teleseismic traveltime tomography and seismic anisotropy study of the lithosphere–asthenosphere system beneath the western Bohemian Massif. The initial high-resolution tomography down to a depth of 250 km did not image any columnar low-velocity anomaly which could be interpreted as a mantle plume anticipated beneath the Eger Rift, similar to recent findings of small plumes beneath the French Massif Central and the Eifel in Germany. Alternatively, we interpret the broad low-velocity anomaly beneath the Eger Rift by an upwelling of the lithosphere–asthenosphere transition. We also map lateral variations of seismic anisotropy of the mantle lithosphere from spatial variations of P -wave delay times and the shear wave splitting. Three major domains characterised by different orientations of seismic anisotropy correspond to the major tectonic units—Saxothuringian, Moldanubian and the Teplá-Barrandian—and their fabrics fit to those found in our previous studies of mantle anisotropy on large European scales.  相似文献   

15.
Summary. The phase velocity dispersion of fundamental mode Rayleigh waves (period range 13–127 s) is determined by the interstation method for three profiles that traverse the North Sea region of northwest Europe. The resulting observations have been combined to produce a regional phase velocity curve with 95 per cent confidence intervals, which belongs to the aseismic continental platform category of Knopoff.
Inversions of the regional phase velocity curve by the'Hedgehog'method indicate that the North Sea region is characterized by an upper mantle low-velocity zone of S -wave velocity 4.35–4.45 km/s between depths of approximately 85–200 km.  相似文献   

16.
According to recent estimates, the continental mid-crust contains 35–40 per cent amphibolites. Heating of the crust by an underlying mantle plume, for example beneath continental rifts, high plateaus, and areas of intraplate volcanic activity, releases water. Dehydration of amphibole-bearing rocks at depths of 20–40  km occurs mainly in the temperature range 650–700 °C, and this releases about 0.4  wt per cent of water.
  Seismic tomography studies of the crust in the Kirgyz Tien Shan Range, where the age of the tectonic activity is less than 30  Ma, revealed a low-velocity zone in the mid-crust. The velocity of P waves was 0.4  km  s−1 lower than in normal crust. MT sounding data in the region show the existence of a low-resistivity layer with an average resistivity of about 25  Ω  m at the depth of the low-velocity layer. The spatial correlation of the observed anomalous layers and calculated effect of fluid phase on seismic and electric parameters of rocks suggests the presence of aqueous fluids released by the heating of the mid-crust.  相似文献   

17.
Summary. A method for the determination of the anisotropic characteristics of rock samples by acousto-polarization analysis is described. Linearly polarized shear-waves generated by a transducer, propagate through a sample and are recorded by a polarized receiver. Measurements are made by rotating the sample first with the polarization vectors of source and receiver aligned parallel, and rotating again with the polarization vectors orthogonal. The method can determine the orientation of the anisotropic symmetry axes, and can be used to examine linear anisotropic absorption. Use of the method is illustrated by application to strongly anisotropic rocks. It appears to be an effective means of determining the elastic characteristics of rock samples and other anisotropic media.  相似文献   

18.
An introduction to wave propagation in anisotropic media   总被引：8，自引：0，他引：8  
Summary. Wave motion in an anisotropic solid is fundamentally different from motion in an isotropic solid, although the effects are often subtle and difficult to recognize. There are such a wide range of three-dimensional variations possible in anisotropic media that it is difficult to understand the behaviour of wave motion without experimentation. Laboratory experiments are very difficult to construct and extensive numerical experiments have now given many theoretical insights so that the behaviour of waves in anisotropic media is now comparatively well understood. This introduction summarizes some of the relationships and insights required for this understanding.  相似文献   

19.
Shear-wave polarizations on a curved wavefront at an isotropic free surface   总被引：12，自引：0，他引：12  
Summary. We present polarization diagrams of the particle motions at the free surface of an isotropic half-space generated by incident shear waves from a local buried point source. The reflectivity technique is used to calculate synthetic seismograms from which the particle motions are plotted. The particle motions are examined over a range of epicentral distances in a uniform isotropic half-space for different source frequencies and polarization angles, and for different Poisson's ratios. The particle motions due to a curved wavefront possess different characteristics from those generated by plane wavefronts at corresponding incidence angles. A curved wavefront generates a local SP -phase: a P -headwave which propagates along the free surface, and arrives shortly before the direct S -wave. These two arrivals give rise to cruciform particle motions in the sagittal and horizontal planes, which could be misinterpreted as anisotropy-induced shear-wave splitting. An examination of the particle motion in the transverse plane, mutually orthogonal to the sagittal and horizontal planes, can be used to discriminate between isotropic and anisotropic interpretations. The amplitude of the SP -phase is enhanced when it propagates in a low-velocity surface layer overlying the source layer, and may then become the dominant phase on radial-component seismograms. The presence of even a single surface layer may introduce considerable complexity into the seismogram, and we examine the effects of layer thickness, velocity contrast, and source depth on the corresponding polarization diagrams. Reliable information on the source and propagation path characteristics of shear waves from a buried local point source can only be obtained from free-surface records if they are recorded within a very limited epicentral distance range.  相似文献   

20.
Summary. Analysis of NORSAR records and a number of Soviet microfilms reveals second-mode surface Caves propagating along paths covering a large part of Eurasia. These second modes in the 6–15-s period band are frequently disturbed by other surface-wave modes and by body-wave arrivals. However, in all cases, where the modes appear to be undisturbed and show normal dispersion, the Second Rayleigh modes have a slowly varying phase difference with the Second Love modes. This coupling has the particle motion of Inclined Rayleigh waves characteristic of surface-wave propagation in anisotropic media, where the anisotropy possesses a horizontal plane of symmetry. Numerical examination of surface wave propagating in Earth models, with an anisotropic layer in the upper mantle, demonstrate that comparatively small thicknesses of material with weak velocity anisotropy can produce large deviations in the polarizations of Inclined Rayleigh Second modes. In many structures, these inclinations are very sensitive to small changes in anisotropic orientation and to small changes in the surrounding isotropic structure. It is suggested that examination of second mode inclination anomalies of second mode surface waves may be a powerful technique for examining the detailed anisotropic structure of the upper mantle.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号