首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 671 毫秒
1.
The source characteristics of 33 earthquakes with magnitude mb between 4.4 and 6.0, which occurred in the Himalayan and nearby regions, are investigated using the records of the Hyderabad seismograph station. The P- and S-wave spectra of these events are interpreted in terms of Brune's seismic source model for estimating the source parameters, i.e., seismic moment, source dimension, stress drop, average dislocation, apparent stress and the radiated energy. Seismic moments, M0, vary between 0.3 × 1024 and 9.0 × 1026 dyne cm; source dimensions, r, between 4.3 and 18.6 km; stress-drops, Δσ between 0.3 and 151.6 bar; average dislocations, u between 0.6 and 381 cm; apparent stresses, ησ between 0.1 and 73.2 bar. The radiated energy, ER is estimated by the spectrum integration method and is found to vary between 0.2 × 1018 and 9.3 × 1022 erg. In general, the stress drop and apparent stress are found to be high, indicating high stresses in these regions.  相似文献   

2.
We modeled a tsunami from the West Papua, Indonesia earthquakes on January 3, 2009 (M w?=?7.7). After the first earthquake, tsunami alerts were issued in Indonesia and Japan. The tsunami was recorded at many stations located in and around the Pacific Ocean. In particular, at Kushimoto on Kii Peninsula, the maximum amplitude was 43?cm, larger than that at Manokwari on New Guinea Island, near the epicenter. The tsunami was recorded on near-shore wave gauges, offshore GPS sensors and deep-sea bottom pressure sensors. We have collected more than 150 records and used 72 stations?? data with clear tsunami signals for the tsunami source modeling. We assumed two fault models (single fault and five subfaults) which are located to cover the aftershock area. The estimated average slip on the single fault model (80?×?40?km) is 0.64?m, which yields a seismic moment of 1.02?×?1020?Nm (M w?=?7.3). The observed tsunami waveforms at most stations are well explained by this model.  相似文献   

3.
Aftershock locations, source parameters and slip distribution in the coupling zone between the overriding North American and subducted Rivera and Cocos plates were calculated for the 22 January 2003 Tecomán earthquake. Aftershock locations lie north of the El Gordo Graben with a northwest-southeast trend along the coast and superimposed on the rupture areas of the 1932 (M w?=?8.2) and 1995 (M w?=?8.0) earthquakes. The Tecomán earthquake ruptured the northwest sector of the Colima gap, however, half of the gap remains unbroken. The aftershock area has a rectangular shape of 42?±?2 by 56?±?2?km with a shallow dip of roughly 12° of the Wadati-Benioff zone. Fault geometry calculated with the Náb??lek (1984) inversion procedure is: (strike, dip, rake)?=?(277°, 27°, 78°). From the teleseimic body wave spectra and assuming a circular fault model, we estimated source duration of 20?±?2?s, a stress drop of 5.4?±?2.5?MPa and a seismic moment of 2.7?±?.7?×?1020?Nm. The spatial slip distribution on the fault plane was estimated using new additional near field strong motion data (54?km from the epicenter). We confirm their main conclusions, however we found four zones of seismic moment release clearly separated. One of them, not well defined before, is located toward the coast down dip. This observation is the result of adding new data in the inversion. We calculated a maximum slip of 3.2?m, a source duration of 30?s and a seismic moment of 1.88?×?1020?Nm.  相似文献   

4.
We investigate the scaling relationships among earthquake source parameters using more than 300 good quality broad band seismograms from 30 small earthquakes in the Kumaon Himalaya from the spectral analysis of P and S waves. The average ratio of P/S wave corner frequency is found to be 1.13, which is suggestive of shift in the corner frequency. The estimated seismic moment range from 1.6?×?1013–5.8?×?1015 N?m, while the stress drop varies from 0.6 to 16 bars with 80 % of the events below 10 bars. An analysis of stress drop and apparent stress drop indicates the partial stress drop mechanism in the region. The source radii are between 0.17 and 0.88 km. The total seismic energy varies from 1.79?×?108 to 7.30?×?1011 J. We also observe the variation in seismic energy for a given seismic moment. The scaling relation between the seismic moment and stress drop suggests the breakdown of constant stress drop scaling for the range of seismic moments obtained here for the region. This shows the anomalous behavior of small earthquakes in the region. The study indicates that the stress drop is the dominant scaling factor for the moments studied here.  相似文献   

5.
Fifty earthquakes that occurred in Hungary (central part of the Pannonian basin) with local magnitude $M_\textrm{L}$ ranging from 0.8 to 4.5 have been analyzed. The digital seismograms used in this study were recorded by six permanent broadband stations and 20 short-period ones at hypocentral distances between 10 and 327 km. The displacement spectra for P- and SH-waves were analyzed according to Brune’s source model. Observed spectra were corrected for path-dependent attenuation effects using an independent regional estimate of the quality factor Q S . To correct spectra for near-surface attenuation, the κ parameter was calculated, obtaining it from waveforms recorded at short epicentral distances. The values of the κ parameter vary between 0.01 and 0.06 s with a mean of 0.03 s for P-waves and between 0.01 and 0.09 s with a mean of 0.04 s for SH-waves. After correction for attenuation effects, spectral parameters (corner frequency and low-frequency spectral level) were estimated by a grid search algorithm. The obtained seismic moments range from 4.21×1011 to 3.41×1015 Nm (1.7?≤?M w ?≤?4.3). The source radii are between 125 and 1,343 m. Stress drop values vary between 0.14 and 32.4 bars with a logarithmic mean of 2.59 bars (1 bar = 105 Pa). From the results, a linear relationship between local and moment magnitudes has been established. The obtained scaling relations show slight evidence of self-similarity violation. However, due to the high scatter of our data, the existence of self-similarity cannot be excluded.  相似文献   

6.
—?An intriguing observation in Greenland is a clear spatial correlation between seismicity and deglaciated areas along passive continental margins, a piece of evidence for earthquake triggering due to postglacial rebound. Another piece of evidence for induced seismicity due to deglaciation derives from earthquake source mechanisms. Sparse, low magnitude seismicity has made it difficult to determine focal mechanisms from Greenland earthquakes. On the basis of two normal faulting events along deglaciated margins and from the spatial distribution of epicenters, earlier investigators suggested that the earthquakes of Greenland are due to postglacial rebound. This interpretation is tested here by using more recent data. Broadband waveforms of teleseismic P waves from the August 10, 1993 (m b = 5.4) and October 14, 1998 (m b = 5.1) earthquakes have been inverted for moment tensors and source parameters. Both mechanisms indicate normal faulting with small strike-slip components: the 1993 event, strike = 348.9°, dip = 41.0°, rake =?56.3°, focal depth = 11?km, seismic moment = 1.03?×?1024 dyne-cm, and M w = 5.3; the 1998 event, strike = 61.6°, dip = 58.0°, rake =?95.5°, focal depth = 5?km, seismic moment = 5.72?×?1023 dyne-cm, and M w = 5.1. These and the two prior events support the theory that the shallow part of the lithosphere beneath the deglaciated margins is under horizontal extension. The observed stress field can be explained as flexural stresses due to removal of ice loads and surface loads by glacial erosion. These local extensional stresses are further enhanced by the spreading stress of continental crust and reactivate preexisting faults. Earthquake characteristics observed from Greenland suggest that the dominant seismogenic stresses are from postglacial rebound and spreading of the continental lithosphere.  相似文献   

7.
The Hsingtai, China earthquakes of March 1966 were a series of destructive earthquakes associated with the Shu-lu graben. Five strong shocks of Ms ≥ 6 occurred within a period of less than a month, the largest of which was Ms 7.2. Body and surface waves over the period range from several to 100 s have been modeled for the four largest events using synthetic seismograms in the time domain and spectral analysis in the frequency domain. Data from ground deformation, local geology, regional seismic network, and teleseismic joint epicenter determination have also been used to constrain the source model and the rupture process.The fault mechanism of the Hsingtai sequence was mainly strike-slip with a small component of normal dip-slip. The strikes of the four largest shocks range from ～ N26° to 30°E, approximately along strike of the major faults of the Shu-lu graben and the aftershock distribution. The source mechanisms can be explained with a NNW-SSE extensional stress and a NEE-SWW compressional stress acting in the area. The major shocks all had focal depths ～ 10 km.The four largest shocks in the sequence were characterized by a relatively simple and smooth dislocation time history. The durations of the far-field source time functions ranged from 3.5 to 5 s, while the rise times were all ～ 1 s. The seismic moments of the four largest earthquakes ranged from 1.43 × 1025 to 1.51 × 1026 dyne cm?1. The fault sizes of the four events were very close. Assuming circular faults, the diameters of the four events were determined to be between 10 and 14 km. Stress drops varied from ～ 52 to 194 bars. A trend of increasing stress drop with earthquake size was observed.A survey of stress drop determinations for 15 major intraplate earthquakes shows that on the average the magnitude of stress drop of oceanic intraplate earthquakes and passive continental margin events is higher (～ 200 to several hundred bars) than that of continental intraplate earthquakes (～ 100 bars or less).  相似文献   

8.
Based on the scattering coda model by which local and regional earthquakes are interpreted (K. Aki, 1969), and using observational coda data of 68 aftershocks of the 1985 Luquan, Yunnan earthquake registered by the VGK seismographs installed at 12 stations in the Yunnan regional short-period network, theQ-values of coda waves are calculated respectively for 6 time intervals. It is observed that within the frequency range of 0.40–1.65 Hz of the observed data, theQ-values are closely related with the frequencies and the calculated codaQ ranges between 80–240 with the coefficient of frequency dependence η=0.45. The calculated source factorsB(f> p) of the coda waves which indicate the scattering strength are mostly within the order 10?23–10?24. Areas with lowQ-values present high scattering. It should be noted that by comparing data obtained before and after the Luquan earthquake, clear changes can be detected in theQ-values measured at stations close to the epicentral region, and that theQ-values of the aftershock coda are less than about one half of the pre-shock values. It may be mentioned that the time-dependent regional variations of theQ-values might possibly bring about practical significance in earthquake prediction. Moreover, aftershock focal parameters are determined. Through discussions on the quantitative relations between the focal parameters, we get: 1gE=1.59M L+ 11.335;E=(2.10 × 10?5)M 0; length of focal rupturea=0.40?0.80 km for 3.0≤M L<5.0 events; stress drop Δσ=(6.0–130) ×105 Pa. Through interpretation of the data, we have also learned the important characteristics that there is no linear relation between the stress drops and the earthquake magnitudes.  相似文献   

9.
The April 20, 2013 Lushan earthquake which occurred in Sichuan, China had only moderate thrust. However, the computed seismic moments (M 0) for the Lushan earthquake calculated by several institutions differ significantly from 0.4 × 1019 to 1.69 × 1019 Nm, up to four times difference. We evaluate ten computed M 0s by using normal mode observations from superconducting gravimeters in Mainland China. We compute synthetic normal modes on the basis of moment tensor solutions and fit them to the observed normal modes. Comparison of our results indicates that M 0 is the main cause for some large differences between observations and synthetics. We suggest that a moment magnitude of M w6.6, corresponding to a M 0 of 0.97–1.08 × 1019 Nm, characterizes the size and strength of the seismic source of the Lushan earthquake.  相似文献   

10.
The source parameters of the major events of a swarm and of two seismic sequences, occurred in the Friuli area (Northeastern Italy) and in Western Slovenia, were estimated. The Claut swarm (C96) occurred since the end of January to June 1996, with a MD 4.3 major shock and it appears composed of three sub-sequences. The two sequences are the Kobarid sequence (K98) started on April 12, 1998 with a MD 5.6 mainshock and the M.te Sernio (S02) sequence caused by the February 14, 2002 earthquake (MD = 4.9). Acceleration and velocity data recorded by the local seismic network of the Istituto Nazionale di Oceanografia e di Geofisica Sperimenale (OGS) and corrected for attenuation, were employed to estimate seismic moments and radiated energies. Source dimensions were inferred from the computed corner frequencies and the stress release was estimated from the Brune stress drop, the apparent stress and the RMS stress drop. On the whole, seismic moments range from 1.7 × 1012 to 1.1 × 1017 N m, and radiated energies are in the range 106–1013 J. Brune stress drops are scattered and do not show any evidence of a self-similarity breakdown for sources down to 130 m radius. The radiated seismic energy scales as a function of seismic moment, with a slope of the scaling relation that decreases for increasing seismic moments.The mechanism of stress release was analyzed by computing the ɛ parameter of Zuniga [Zuniga, R., 1993. Frictional overshoot and partial stress drop. Which one? Bull. Seismol. Soc. Am. 83, 939–944]. The K98 and S02 sequences are characterized by a wide range of the ɛ parameter with stress drop mechanism varying from partial locking to overshoot cases. The ɛ values of the C96 swarm are more homogeneous and close to the Orowan's condition. The radiated seismic energy and the ratio of stress drop between mainshock and aftershocks appear different among the analyzed cases. We therefore investigated the relationship between the stress parameters of the main shock and the energy radiated by the aftershock sequences. For this purpose, we also estimated the source parameters of two other sequences occurred in the area, with mainshocks of MD 4.1 and 5.1, respectively. We found a positive correlation between the Brune stress drop of the mainshock and the ratio between the radiated energy of the mainshock and the summation of the energies radiated by the aftershocks.  相似文献   

11.
This paper presents the results of a modified two-step inversion algorithm approach to find S wave quality factor Q β(f) given by Joshi (Bull Seis Soc Am 96:2165–2180, 2006). Seismic moment is calculated from the source displacement spectra of the S wave using both horizontal components. Average value of seismic moment computed from two horizontal components recorded at several stations is used as an input to the first part of inversion together with the spectra of S phase in the acceleration record. Several values of the corner frequency have been selected iteratively and are used as inputs to the inversion algorithm. Solution corresponding to minimum root mean square error (RMSE) is used for obtaining the final estimate of Q β(f) relation. The estimates of seismic moment, corner frequency and Q β(f) from the first part of inversion are further used for obtaining the residual of theoretical and observed source spectra which are treated as site amplification terms. The acceleration record corrected for the site amplification term is used for determination of seismic moment from source spectra by using Q β(f) obtained from first part of inversion. Corrected acceleration record and new estimate of seismic moment are used as inputs to the second part of the inversion scheme which is similar to the first part except for use of input data. The final outcome from this part of inversion is a new Q β(f) relation together with known values of seismic moment and corner frequency of each input. The process of two-step inversion is repeated for this new estimate of seismic moment and goes on until minimum RMSE is obtained which gives final estimate of Q β(f) at each station and corner frequency of input events. The Pithoragarh district in the state of Uttarakhand in India lies in the border region of India and Nepal and is part of the seismically active Kumaon Himalaya zone. A network of eight strong motion recorders has been installed in this region since March, 2006. In this study we have analyzed data from 18 local events recorded between March, 2006 and October, 2010 at various stations. These events have been located using HYPO71 and data has been used to obtain frequency-dependent shear-wave attenuation. The Q β(f) at each station is calculated by using both the north-south (NS) and east-west (EW) components of acceleration records as inputs to the developed inversion algorithm. The average Q β(f) values obtained from Q β(f) values at different stations from both NS and EW components have been used to compute a regional average relationship for the Pithoragarh region of Kumaon Himalaya of form Q β(f)?=?(29?±?1.2)f (1.1 ± 0.06).  相似文献   

12.
The attenuation characteristics based on coda waves of two areas—Jamnagar and Junagarh of Saurashtra, Gujarat (India)—have been investigated in the present study. The frequency dependent relationships have been developed for both the areas using single back scattering model. The broadband waveforms of the vertical components of 33 earthquakes (Mw 1.5–3.5) recorded at six stations of the Jamnagar area, and broadband waveforms of 68 earthquakes (Mw 1.6–5) recorded at five stations of the Junagarh area have been used for the analysis. The estimated relations for the Junagarh area are: Q c?=?(158?±?5)f(0.99±0.04) (lapse time : 20?s), Q c?=?(170?±?4.4)f(0.97±0.02) (lapse time : 30?s) and Q c?=?(229?±?6.6)f(0.94±0.03) (lapse time : 40?s) and for the Jamnagar area are: Q c?=?(178?±?3)f(0.95±0.05) (lapse time : 20?s), Q c?=?(224?±?6)f(0.98±0.06) (lapse time : 30?s) and Q c?=?(282?±?7)f(0.91±0.03) (lapse time : 40?s). These are the first estimates for the areas under consideration. The Junagarh area appears to be more attenuative as compared to the Jamnagar area. The increase in Q c values with lapse time found here for both the areas show the depth dependence of Q c as longer lapse time windows will sample larger area. The rate of decay of attenuation (Q ?1) with frequency for the relations obtained here is found to be comparable with those of other regions of the world though the absolute values differ. A comparison of the coda-Q estimated for the Saurashtra region with those of the nearby Kachchh region shows that the Saurashtra region is less heterogeneous. The obtained relations are expected to be useful for the estimation of source parameters of the earthquakes in the Saurashtra region of Gujarat where no such relations were available earlier. These relations are also important for the simulation of earthquake strong ground motions in the region.  相似文献   

13.
—?The digital data acquired by 16 short-period seismic stations of the Friuli-Venezia-Giulia seismic network for 56 earthquakes of magnitude 2.3–4.7 which occurred in and near NE Italy have been used to estimate the coda attenuation Q c and seismic source parameters. The entire area under study has been divided into five smaller regions, following a criterion of homogeneity in the geological characteristics and the constrains imposed by the distribution of available events. Standard IASPEI routines for coda Q c determination have been used for the analysis of attenuation in the different regions showing a marked anomaly in the values measured across the NE border between Friuli and Austria for Q 0 value. A large variation exists in the coda attenuation Q c for different regions, indicating the presence of great heterogeneities in the crust and upper mantle of the region. The mean value of Q c (f) increases from 154–203 at 1.5?Hz to 1947–2907 at 48?Hz frequency band with large standard deviation estimates.¶Using the same earthquake data, the seismic-moment, M 0, source radius, r and stress-drop, Δσ for 54 earthquakes have been estimated from P- and S-wave spectra using the Brune's seismic source model. The earthquakes with higher stress-drop (greater than 1?Kbar) occur at depths ranging from 8 to 14?km.  相似文献   

14.
We estimated the source parameters of 53 local earthquakes (2.0<ML<5.7) of the Friuli-Venezia Giulia (Northeastern Italy) area, recorded by the short-period local seismic network of the Istituto Nazionale di Oceanografia e Geofisica Sperimentale (OGS), in the period 1995-2003. Data were selected on the basis of high quality locations and focal mechanisms. Standard H/V spectral ratios (HVRS) of the three-component stations of the network were performed in order to assess local amplifications, and only stations showing HVRS not exceeding two were considered for the source parameters estimation. Both velocity and acceleration data were used to compute the SH-wave spectra. Observed spectra were corrected for attenuation effects using an independent regional estimate of the quality factor Q and a station dependent estimate of the spectral decay parameter k. Only earthquakes with ML>3.0 recorded with a sampling rate of 125 cps were used to compute k, thus allowing to visualize a linear trend of the high frequency acceleration spectrum up to 40-50 Hz. SH-wave spectra, corrected for attenuation, showed an ω−2 shape allowing a good fit with the Brune model. Seismic moments and Brune radii ranged between 1.5×1012 and 1.1×1017  N m and between 0.1 and 2.7 km respectively. We obtained Mo=1.1×1017  N m for the seismic moment of the Kobarid (SLO) main shock, in good agreement with the Harvard CMT solution (Mo=3.5×1017  N m). Brune stress drops were confined to the range from 0.07 to 5.31 MPa, with an average value of 0.73 MPa and seem to be approximately constant over five orders of magnitude of seismic moment. Radiated seismic energy computed from two nearby stations scales with seismic moment according to , and apparent stress values are between 0.02 and 4.26 MPa. The observed scatter of Brune stress drop data allowed to hypothesize a scaling relation between seismic moment and corner frequency in order to accommodate both Brune stress drop and apparent stress scalings. No systematic differences are evidenced between stress parameters of earthquakes with different focal mechanisms. As a consequence, a relation of the seismic stress release with the strength of rocks can be hypothesized. A high correlation (r>0.9) of Brune stress drop is found with both apparent stress and RMS stress drop, according to and respectively.  相似文献   

15.
Large, shallow, thrust earthquakes in the Solomon Islands region tend to occur in closely related pairs. Two recent sequences are July 14, 1971 (MS = 7.9) and July 26, 1971 M(S = 7.9) and 14h37m, July 20, 1975 (MS = 7.9) and 19h54m, July 20, 1975 (MS = 7.7). The mechanism of these seismic doublets has important bearing on the triggering mechanism of earthquakes in subduction zones. Detailed analysis of the seismic body waves and surface waves were performed on the 1971, 1974, and 1975 doublets, providing a better understanding of: (1) the mechanics of seismic triggering, (2) the state of stress on the fault plane, and (3) the nature of subduction between the Pacific and Indian plates. The results indicate that although the geometry of the subduction zone in the Solomon Islands is complicated by the presence of several sub-plates, the slip direction of the Indian plate with respect to the Pacific plate is relatively uniform over the entire region. The large seismic moments of the 1971 sequence (1.2 · 1028 and 1.8 · 1028 dyne cm) indicate that these events directly represent the underthrusting of the Indian and Solomon plates beneath the Pacific plate. The body waves from these doublets, recorded on the WWSSN long-period seismograms, are remarkably impulsive and simple compared with those from events of comparable seismic moment in other subduction zones. In addition, the source dimensions of the body waves are 30–70 km in length, substantially smaller than the overall rupture surfaces radiating the surface waves which are 100–300 km in length. These facts suggest the existence of relatively large, isolated high-stress zones on the fault plane. This type of stress distribution is distinct from other regions which have more heterogeneous stress distribution on the fault plane, and this is proposed as the principal characteristic of this region responsible for the occurrence of the doublets and for the apparent efficiency of triggering in the Solomon trench. Prior to the 1971 sequence, similar sequences have occurred in the same area in 1919–1920 and 1945–1946. From the amount of slip (1.3 m) determined for the 1971 sequence and the apparent recurrence interval of 25 years, a seismic slip rate of 5 cm yr?1 is determined. This value is a significant portion of the convergence rate between the Indian and Pacific plates indicating that the plate motion here is taken up largely by seismic slip.  相似文献   

16.
On the basis of about 300 earthquake wave forms observed in the Shidian M S=5.9 sequences on April 12, 2001 recorded in Kunming Digital Seismic Network, the spectra of shear wave have been used to estimate the focal parameters of these earthquake sequences. The results show that within the magnitude range of 1.5–5.3, the seismic moments are 1010–1016 N·m, the corner frequencies are 0.2–0.8 Hz, radii of the focal rupture are 200–2 500 m and the stress drops are 0.1×105–20×105Pa. Through the statistical analyses of variation of corner frequency f c and stress drop Δσ with time, it is discovered that the average corner frequency of the foreshock sequences is obviously lower than that of the aftershock sequences. Contrarily, the average stress drops Δσ of the foreshock sequences are clearly higher than that of the aftershocks. It is considered that these variation characteristics of average corner frequency and stress drops before and after the main shock have index significance to the precursory information before a strong earthquake. The higher stress drops for the foreshock sequences show that the higher shear stresses have been stored in the area of main shock. After the main shock, most of the stresses have been released, so the aftershock sequences show a rupture process of lower stresses.  相似文献   

17.
—?Microseismicity (M?M?M?M??6 were also monitored at a crustal movement monitoring station located several hundred meters from the veins. It was found that the opening of the vertical ore veins primary led to significant strain and tilt, but not to seismicity, because the delay and the longer duration of the seismicity were significant. Most seismic events involve thrusting mechanisms that are consistent with the present stress state of E-W-oriented tectonic compression, but are not consistent with the opening of the deepest ore vein. Interstingly, all the events within a few months of the heavy rainfall occurred near the faults that offset the deepest ore veins, wheareas all those events located away from the deepest ore veins occurred many months after the heavy rainfall. Consequently, the delayed diffusion of water appears to have played a dominant role in reducing rock strength, which led to seismicity in the Ikuno mine.  相似文献   

18.
The 2017 Guptkashi earthquake occurred in a segment of the Himalayan arc with high potential for a strong earthquake in the near future. In this context, a careful analysis of the earthquake is important as it may shed light on source and ground motion characteristics during future earthquakes. Using the earthquake recording on a single broadband strong-motion seismograph installed at the epicenter, we estimate the earthquake’s location (30.546° N, 79.063° E), depth (H?=?19 km), the seismic moment (M0?=?1.12×1017 Nm, M w 5.3), the focal mechanism (φ?=?280°, δ?=?14°, λ?=?84°), the source radius (a?=?1.3 km), and the static stress drop (Δσ s ~22 MPa). The event occurred just above the Main Himalayan Thrust. S-wave spectra of the earthquake at hard sites in the arc are well approximated (assuming ω?2 source model) by attenuation parameters Q(f)?=?500f0.9, κ?=?0.04 s, and fmax?=?infinite, and a stress drop of Δσ?=?70 MPa. Observed and computed peak ground motions, using stochastic method along with parameters inferred from spectral analysis, agree well with each other. These attenuation parameters are also reasonable for the observed spectra and/or peak ground motion parameters in the arc at distances ≤?200 km during five other earthquakes in the region (4.6?≤?M w ?≤?6.9). The estimated stress drop of the six events ranges from 20 to 120 MPa. Our analysis suggests that attenuation parameters given above may be used for ground motion estimation at hard sites in the Himalayan arc via the stochastic method.  相似文献   

19.
The reaction of CO + OH? in aqueous solution to give formate was studied as a carbon monoxide sink on the primitive earth and in the present ocean. The reaction is first order in OH? and first order in the molar CO concentration. The second order rate constant is given by log k(M?1hr?1) = 15.83?4886/T between 25°C and 60°C. Using the solubility of CO in sea water, and assuming a pH of 8 for a primitive ocean of the present size, the halflife of CO in the atmosphere is calculated to be 12 × 106 yr at 0°C and 5.5 × 104 yr at 25°C.Three other CO sinks would have been important in the primitive atmosphere: CO + H2 → H2CO driven by various energy sources, CO + OH → CO2 + H, and the Fischer-Tropsch reaction of CO + H2 → hydrocarbons, etc. It is concluded that the lifetime of a CO atmosphere would have been very short on the geological time scale although the relative importance of these four CO sinks is difficult to estimate.The CO + OH? reaction to give formate is a very minor CO sink on the earth at the present time.  相似文献   

20.
Source parameters of the earthquakes of the Baikal rift system   总被引：1，自引：0，他引：1  
The dynamic parameters of the earthquake source—the seismic moment, the moment magnitude, the source radius, the stress drop, and the amplitude of displacement—are determined by the amplitude Fourier spectra of the body shear waves (S-waves) for 62 earthquakes of the Baikal rift system with the energy class of K P = 9.1–15.7. In the calculations I used the classical Brune model. The seismic moment of the earthquakes being investigated changes from 3.65 × 1011 N m to 1.35 × 1018 N m, and the radii of earthquake sources vary from 390 m to 1.84 km. The values of the drop in stress Δσ grow with an increase in the seismic moment up to 1.7 × 108 Pa. For the group of weak earthquakes (M w = 1.7–3.3), extremely low values of the drop in stress 103–104 Pa are observed. The maximum amplitude of displacement in the source amounts to 5.95 m. The empirical equations between the seismic moment and the other dynamic parameters of the source are determined. The regional dependence of the seismic moment and energy class is obtained: log M 0 ± 0.60 = 1.03K P + 3.17. The character of the relationship between the seismic moment and the corner frequency indicates that the classical scaling law of the seismic spectrum for the earthquakes in question is not fulfilled. The obtained estimates of the dynamic parameters are in satisfactory agreement with the published data concerning the analogous parameters of the other rift zones, which reflects the general regular patterns of the destruction of the lithosphere and the seismicity in the extension zones of the lithosphere.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号