首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 484 毫秒
1.
A multiphase model is proposed to describe the mechanical behaviour of geomaterials reinforced by linear inclusions. This macroscopic approach considers the reinforced soil or rock mass as the superposition of continuous media. Equations of motion and constitutive laws of the model are first derived. Its implementation in a finite element computer code is then detailed. A modified implicit algorithm for elastoplastic problems is proposed. The model and its implementation are fully validated for rock‐bolted tunnels (comparison with scale model experiments) and piled raft foundations (comparison with the classical ‘hybrid method’). The Messeturm case history is finally presented to assess the handiness of the approach for real structures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

2.
Open-ended pipe piles are often used in offshore foundations. The response of the soil plug inside a pipe pile is poorly understood, and only limited work has been performed to quantify the response under the different loading conditions relevant to offshore platforms. This paper describes numerical analyses that have been carried out in order to assess the end-bearing capacity of the soil plug under loading conditions which range from undrained to fully drained. The soil plug has been modelled as either elastic, elastic–perfectly-plastic or elastoplastic. The soil–pile interface, an important aspect of the problem, has been examined critically. Comparison with experimental data from model test at laboratory scale indicates that the load–deformation behaviour of the soil plug is modelled well using an elastoplastic model for the soil plug, and an elastic–perfectly-plastic joint element to model the soil–pile interface. The finite element analyses show that, under typical loading conditions, adequate end bearing may be mobilized by the soil plug, largely by high effective stresses in the bottom 3–5 diameters of the soil plug.  相似文献   

3.
4.
A micro-mechanics-based elastic–plastic model is proposed to describe mechanical behaviors of porous rock-like materials. The porous rock is considered as a composite material composed of a solid matrix and spherical pores. The effective elastic properties are determined from the classical Mori–Tanaka linear homogenization scheme. The solid matrix verifies a pressure-dependent Mises–Schleicher-type yield criterion. Based on the analytical macroscopic yield criterion previously determined with a nonlinear homogenization procedure (Shen et al. in Eur J Mech A/Solids 49:531–538, 2015), a complete elastic–plastic model is formulated with the determination of a specific plastic hardening law and plastic potential. The micro-mechanics-based elastic–plastic model is then implemented for a material point in view of simulations of homogeneous laboratory tests. The proposed model is applied to describe mechanical behaviors of two representative porous rocks, sandstone and chalk. Comparisons between numerical results and experimental data are presented for triaxial compression tests with different confining pressures, and they show that the micro-mechanical model is able to capture main features of mechanical behaviors of porous rock-like rocks.  相似文献   

5.
The ultimate bearing capacity problem of column‐reinforced foundations under inclined loading is investigated within the framework of static and kinematic approaches of yield design theory. The configuration of a native soft clayey soil reinforced by either a group of purely cohesive columns (lime‐column technique) or a group of purely frictional columns (stone‐column technique) is analyzed under plane strain conditions. First, lower bound estimates are derived for the ultimate bearing capacity by considering statically admissible piecewise linear stress distributions that comply with the local strength conditions of the constitutive materials. The problem is then handled by means of the yield design kinematic approach of limit analysis through the implementation of several failure mechanisms, allowing the formulation of upper bound estimates for the ultimate bearing capacity. A series of finite element limit load solutions obtained from numerical elastoplastic simulations suggests that the predictions derived from the kinematic approach appear to be more accurate than the estimates obtained from the static approach. Comparison with available results obtained in the context of yield design homogenization demonstrates the accuracy of the proposed direct analysis, which may therefore be viewed as complementary approach to homogenization‐based approaches when a small number of columns is involved. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

6.
Results of both triaxial and direct shear tests on reinforced soil samples performed by different investigators have shown that soil dilatancy and extensibility of the reinforcements have a significant effect on the generated tension forces in the inclusions. An appropriate soil--reinforcement load transfer model, integrating the effect of soil dilatancy and reinforcement extensibility is therefore needed to adequately predict forces in the inclusions under expected working loads. This paper present a load transfer model assuming an elastoplastic strain hardening behaviour for the soil and an elastic--perfectly plastic behaviour for the reinforcement. This model is used to analyse the response of the reinforced soil material under triaxial compression loading. A companion paper present the application of this model for numerical simulations of direct shear tests on sand samples reinforced with different types of tension resisting reinforcements. The model allows an evaluation of the effect of various parameters such as mechanical characteristics and dilatancy properties of the soil, extensibility of the reinforcements, and their inclination with respect to the failure surface, on the development of resisting tensile stresses in the reinforcements. A parametric study is conducted to evaluate the effect of these parameters on the behaviour of the reinforced soil material. An attempt is also made to verify the proposed model by comparing numerical predictions with available experimental results of both triaxial and direct shear tests on reinforced soil samples. This model can be used for analysis and design of reinforced soil walls with different types of tension resisting inclusions to predict tension forces under expected working loads.  相似文献   

7.
The macroscopic linear elastic behaviour of inclusion‐reinforced soils, regarded as periodic composite media, is investigated by means of the homogenization theory. Special attention is given here to the determination of their longitudinal shear stiffness properties, which strongly govern the reinforced ground response under lateral loading. Combining the use of analytical, variational and numerical methods, we thoroughly examined three particular engineering‐relevant configurations: single trench, column and cross trench reinforcements. Fairly accurate closed‐form expressions are thus obtained, giving the value of the reinforced soil longitudinal shear stiffness as a function of the individual components shear moduli and reinforcement volume fraction. It is shown in particular that adopting a cross trench reinforcement layout instead of the classical column configuration results in a much higher improvement of the longitudinal shear stiffness. The results are then applied to assessing the reduction of soil liquefaction risk, which can be attributed to the presence of the reinforcing inclusions. Again, they clearly demonstrate the excellent performance of the cross trench configuration as compared with the complete inefficiency of the column reinforcement technique. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

8.
Geomaterials such as sand and clay are highly heterogeneous multiphase materials. Nonlocality (or a characteristic length scale) in modeling geomaterials based on the continuum theory can be associated with several factors, for instance, the physical interactions of material points within finite distance, the homogenization or smoothing process of material heterogeneity, and the particle or problem size-dependent mechanical behavior (eg, the thickness of shear bands) of geomaterials. In this article, we formulate a nonlocal elastoplastic constitutive model for geomaterials by adapting a local elastoplastic model for geomaterials at a constant suction through the constitutive correspondence principle of the state-based peridynamics theory. We numerically implement this nonlocal constitutive model via the classical return-mapping algorithm of computational plasticity. We first conduct a one-dimensional compression test of a soil sample at a constant suction through the numerical model with three different values of the nonlocal variable (horizon) δ. We then present a strain localization analysis of a soil sample under the constant suction and plane strain conditions with different nonlocal variables. The numerical results show that the proposed nonlocal model can be used to simulate the inception and propagation of shear banding as well as to capture the thickness of shear bands in geomaterials at a constant suction.  相似文献   

9.
桩承式围堤是将上部围堤或堆载荷重通过桩筏基础传递到深层较硬的土层,以减少由于围堤或堆载对邻近桩基产生负摩阻力和侧向推力的一种围堤式构筑物。采用基于Mindlin应力解的桩伐基础简化分析方法、弹性和弹塑性三维数值模拟了嘉兴港海盐港区围堤对杭州湾跨海大桥产生的负摩阻力和侧向推力。通过上述3种方法的分析比较,结果表明,采用的简化分析方法与弹性和弹塑性三维数值模拟结果吻合较好,可作为桩承式围堤结构基础的分析和设计方法。  相似文献   

10.
11.
A non-linear three-dimensional finite element procedur is developed and applied for the analysis of pile group foundations. The numerical procedure allows for elastic, non-linear elastic and elastic-plastic hardening behaviour of sand. In order to include the interaction effects involving relative slip and debonding, the thin-layer interface element is used. The predictions for displacements and loads obtained from the numerical procedure are compared with laboratory model test results of a pile group. Displacements, stresses and forces distribution in various components of the pile group are also examined. Furthermore, the effects of the non-linear soil response and relative motions at the interface are indentified and discussed.  相似文献   

12.
Based on hypotheses derived directly from experimental observations of the triaxial behaviour, a constitutive model for fibre reinforced sands is built in this paper. Both the sand matrix and the fibres obey their own constitutive law, whereas their contributions are superimposed using a volumetric homogenization procedure. The Severn‐Trent sand model, which combines well‐known concepts such as critical state theory, Mohr‐Coulomb like strength criterion, bounding surface plasticity and kinematic hardening, is adopted for the sand matrix. Although the fibres are treated as discrete forces with defined orientation, an equivalent continuum stress for the fibre phase is derived to allow the superposition of effects of sand and fibres. The fibres are considered as purely tensile elements following a linear elastic constitutive rule. The strain in the fibres is expressed as a fraction of the strain in the reinforced sample so that imperfect bonding is assumed at the sand‐fibre interface. Only those fibres oriented within the tensile strain domain of the sample can mobilize tensile stress—the orientation of fibres is one of the key ingredients to capture the anisotropic behaviour of fibre reinforced soil that is observed for triaxial compression and extension loading. A further mechanism of partition of the volume of voids between the fibres and the sand matrix is introduced and shown to be fundamental for the simulation of the volumetric behaviour of fibre‐reinforced soils. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

13.
侯娟  张孟喜  张陶陶  戴治恒 《岩土力学》2015,36(Z2):702-708
建立了横-竖立体加筋(H-V筋)地基的有限元模型,通过分析地基中的竖向应力分布、水平向位移分布以及筋-土界面相互作用,发现横-竖立体加筋地基中的竖向应力在筋材下方出现扩散和重分布,并逐渐向土体下部传递,使得土体中整体的应力分布更加均匀;同时,横-竖筋材中的竖筋类似于一个侧壁,其提供的垂直侧向力约束了介于竖筋间的土体,限制了土体的侧向水平位移,使得地基中筋材上部土体的侧向水平位移变小。基于有限元模拟对横-竖立体加筋地基加固机制的认识,将横-竖立体筋视为作用在地基上的一维弹性地基梁,通过弹性地基梁理论,根据弗拉曼解推导求解了横-竖立体加筋地基中任意一点竖向附加应力的计算表达式。将模型计算结果与有限元模拟所得结果进行对比发现两者吻合良好。  相似文献   

14.
A multiphase model and corresponding computational time‐saving finite element code is proposed in this paper for predicting the settlements experienced by a piled raft foundation when subject to the combined action of vertical and lateral loadings. This model, which is formulated in the framework of an elastoplastic behaviour for the soil and the reinforcing piles as well, explicitly accounts for the shear and flexural behaviour of the latter. Starting from a simple analytical example where all the concepts attached to this model are clearly illustrated, the main stages leading to its finite element implementation are then presented. The numerical tool thus elaborated, is applied to the simulation of a pile‐reinforced strip foundation submitted to a horizontally applied seismic load in addition to a permanent vertical load. One of the key results of such a simulation in terms of design recommendation, lies in the conclusion that, while the shear and flexural contributions of the reinforcement play quite a negligible role in the case of a vertical load (as compared with their axial resistance), they remain absolutely essential for withstanding the seismic lateral loading. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

15.
Soil freezing is often used to provide temporary support of soft soils in geotechnical interventions. During the freezing process, the strength properties of the soil–water–ice mixture change from the original properties of the water-saturated soil to the properties of fully frozen soils. In the paper, a multiscale homogenization model for the upscaling of the macroscopic strength of freezing soil based upon information on three individual material phases—the solid particle phase (S), the crystal ice phase (C) and the liquid water phase (L)—is proposed. The homogenization procedure for the partially frozen soil–water–ice composite is based upon an extension of the linear comparison composite (LCC) method for a two-phase matrix–inclusion composite, using a two-step homogenization procedure. In each step, the LCC methodology is implemented by estimating the strength criterion of a two-phase nonlinear matrix–inclusion composite in terms of an optimally chosen linear elastic comparison composite with a similar underlying microstructure. The solid particle phase (S) and the crystal ice phase (C) are assumed to be characterized by two different Drucker–Prager strength criteria, and the liquid water phase (L) is assumed to have zero strength capacity under drained conditions. For the validation of the proposed upscaling strategy, the predicted strength properties for fully and partially frozen fine sands are compared with experimental results, focussing on the investigation of the influence of the porosity and the degree of ice saturation on the predicted failure envelope.  相似文献   

16.
17.
The landfills are dumped without any compaction and have a relatively open structure, which is similar to that of the granular materials. However, the original dumped material might be gradually transformed into a lumpy composite structure because of the influence of the climate. As a result, the lumps are randomly distributed in the reconstituted soil. In the presented study, the compression behavior of the lumpy composite soils was analyzed within the homogenization framework. Firstly, the volume of the composite soil was divided into four individual components. The inter‐lump porosity was introduced to account for the evolution of the volume fractions of the constituents, and it was formulated as a function of the overall porosity and those of its constituents. A homogenization law was then proposed based on the analysis of the lumpy structure together with a numerical method, which gives a relationship for tangent stiffnesses of the lumpy soil and its constituents. Finally, a simple compression model was proposed for the composite lumpy material, which incorporates both the influence of the soil structure and the volume fraction change of the reconstituted soil. The predictions of the model were validated against the test results, and the stress distribution within the lumpy composite was assessed. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

18.
深隧道围岩分区破裂的数学模拟   总被引:2,自引:0,他引:2  
戚承志  钱七虎  王明洋  陈剑杰 《岩土力学》2012,33(11):3439-3446
该研究为先前深隧道围岩分区破裂现象内变量梯度塑性模型的进一步发展。利用应变梯度模型研究了深隧道围岩的分区破裂现象。作为额外的状态变量,在此引入应变梯度这一新变量。利用虚功原理得到了深隧道围岩的平衡方程、边界条件和流动准则,利用Clausius-Duhem不等式获得了岩体的本构方程。对于圆形深隧道,由上述模型的一般方程得到了弹性变形情况下、具有下降段的弹塑性变形情况下和不考虑弹性变形的塑性变形情况下圆形深隧道围岩的支配方程,得到了解析解,并讨论了解析解的性质。这一模型不仅扩展了隧道围岩的经典弹塑性模型,也为下一步数值研究深隧道围岩的分区破裂现象奠定了理论基础。  相似文献   

19.
门架式双排抗滑桩的弹塑性模型与计算分析   总被引:3,自引:0,他引:3  
门架式双排抗滑桩的计算模型大部分将桩排间岩土体视为弹性材料,而岩土体为弹塑性材料,使得抗滑桩内力、位移计算结果与实际情况相差较大。假设桩排间岩土体为弹塑性材料,提出一种弹塑性计算模型,该模型将桩排间岩土体看作线弹性单元和塑性单元的组合,根据结构力学知识、土的本构关系和数值分析方法建立一种计算前后排抗滑桩内力的计算方法。首先,由已知的桩顶位移,并结合结构力学位移法求出桩间土总应力。根据Lade-Duncan模型导出这两个单元的基本参数,然后,结合数值分析方法计算出抗滑桩的内力,最后,结合工程实例,运用ANSYS有限元软件进行计算分析,得出门架式双排抗滑桩的内力图。对比监测数据和弹性模型计算结果表明,弹塑性模型的计算结果比弹性模型更加接近监测值。  相似文献   

20.
Drained triaxial tests are conducted on natural and reinforced sand under various stress paths. Direct shear tests and pull-out tests are conducted on soil–reinforcement interface and on reinforcement, respectively. The effects of two types of reinforcement, viz, woven and non-woven geotextile and number of layers of reinforcement are investigated. Hierarchical single surface model is used to depict the behaviour of natural and reinforced soil by treating the soil as a single composite material and by considering soil, reinforcement and interface as independent elements. It is shown that the material parameters are very much affected by the type and the number of layers of reinforcement. The hierarchical model provides satisfactory prediction for both natural and reinforced soil. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号