首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
An eruption on the eastern flank of Piton de la Fournaise volcano started on 16 November, 2002 after 10 months of quiescence. After a relatively constant level of activity during the first 13 days of the eruption, lava discharge, volcanic tremor and seismicity increased from 29 November to 3 December. Lava effusion suddenly ceased on 3 December while shallow earthquakes beneath the Dolomieu summit crater were still recorded at a rate of about one per minute. This unusual activity continued and increased in intensity over the next three weeks, ending with the formation of a pit crater within Dolomieu. Based on ground deformation, measured by rapid-static and continuous GPS and an extensometer, seismic data, and lava effusion patterns, the eruptive period is divided into five stages: 1) slow summit inflation and sporadic seismicity; 2) rapid summit inflation and a short seismic crisis; 3) rapid flank inflation, onset of summit deflation, sporadic seismicity, accompanied by stable effusion; 4) flank inflation, coupled with summit deflation, intense seismicity, and increased lava effusion; and finally 5) little deflation, intense shallow seismicity, and the end of lava effusion. We propose a model in which the pre-intrusive inflation of Stage 1 in the months preceding the eruption was caused by a magma body located near sea level. The magma reservoir was the source of an intrusion rising under the summit during Stage 2. In Stage 3, the magma ponded at a shallow level in the edifice while the lateral injection of a radial dike reached the surface on the eastern flank of the basaltic volcano, causing lava effusion. Pressure decrease in the magmatic plumbing system followed, resulting in upward migration of a collapse front, forming a subterranean column of debris by faulting and stoping. This caused intense shallow seismicity, increase in discharge of lava and volcanic tremor at the lateral vent in Stage 4 and, eventually the formation of a pit crater in Stage 5.  相似文献   

2.
Most of the known pit craters in Hawaii occur along the East and Southwest Rift Zones of Kilauea volcano. The pit craters typically are either astride a single rift zone fracture or between a pair of rift zone fractures. These fractures are prominent in the pit crater walls. The pit craters are elliptical in plan view, with their major diameters ranging from 8 to 1140 m. They range in depth from 6 m to 186 m. They typically develop with initially steep, locally overhanging walls, but as the walls collapse, the craters fill with talus and become shaped like inverted elliptical cones. None of the craters apparently formed as eruptive vents, although some have been subsequently filled by lava. Devil's Throat is the best-exposed pit crater along the East Rift Zone. It is sited at a `waist' between two east-striking zones of ground cracks; the spacing between the crack zones decreases towards Devil's Throat. East-striking fractures are also prominent in the pit crater walls. Pit craters along the Southwest Rift Zone typically are elongate in plan view along the direction of the rift, have large caves at their bases along the long axes of the craters, and are smaller than those of the East Rift Zone. Some closely spaced pits there have coalesced to form a trough. Based on our observations and mechanical considerations, we infer that pit craters form by stoping over an underlying large-aperture rift zone fracture, and not by piston-like collapse over broad magma bodies or voids. Flow of magma along the underlying fracture may remove stoped blocks and prevent the fracture from being choked with debris. This mechanism is consistent with pit crater location, ground crack patterns, the preferred orientation of fractures in pit crater walls, and pit crater geometry (both in map view and cross-section). The mechanism also fits with observations of stoping into a gaping rift fracture that conducted lava from Kilauea caldera during the 1920s. Additionally, the ratio of pit crater width to depth of 0.5 to 2 is consistent with pit craters forming over a nearly vertical opening mode fracture.  相似文献   

3.
The Reykjanes Peninsula rift zone in southwest Iceland is a highly oblique segment of the Mid-Atlantic ridge system which accommodates NW–SE extension during rifting episodes that consist of eruptions and normal faulting, and E–W left-lateral shear strain along strike-slip faults during longer amagmatic periods. Dominant tectonic features on the peninsula are a series of generally NE-striking, sub-parallel eruptive fissures and normal faults, and a cross-cutting zone of N–S striking, right-lateral strike-slip faults. The last series of rifting episodes ended in 1227, and a proposed 1,000 year cyclicity predicts the start of a new series of eruptions within the next 200 years. In order to more accurately characterize the nature of eruptions on the Reykjanes Peninsula, we present a new, spatially accurate map of the ∼2,350 year old Sundhnúkur crater row in the western part of the peninsula, which was examined in detail in order to determine the structural controls on crater row geometry and to understand the interactions that take place between eruptive fissures and pre-existing geological structures. Volcanism is sometimes influenced by small perturbations in the surroundings such as gravitational loading, topography, changes in crustal properties or the presence of fault zones, but there are few field examples showing how fissures are influenced by these pre-existing structures. We identify 27 fissure segments, ranging in strike from 006° to 053°, with varying spacing and overlap between them. Significant local variability in strike and stepping sense of segments occurs in proximity to topographic highs as well as within zones of faulting that pre-date the crater row. Strike also varies at the northern end of the crater row as it approaches a region of older crust at the rift margin. Our data support numerical and laboratory modeling results which show that local topography, pre-existing fractures and crustal properties influence the path taken by magma on its way through the shallow crust.  相似文献   

4.
Four volcano-structural stages have accompanied the building of Piton des Neiges: 1) Emergent growth stage of the island. The major eruptive system is a rift zone trending N 120°, associated with dextral strike-slip faults trending N 30° and en-echelon extensional fissures trending N 70°. Breccias and lava tubes produced by aerial and phreatomagmatic activity are injected with outward-dipping dike-swarms along ring fractures suggesting a mechanism analogous to cauldron subsidence. 2) Shield building stages of growth are related to fissures along the main rift zone and three minor rifts trending N 160°, N 45° and N 10°. The summit of the basaltic shield volcano is stretched and collapsed in a graben-like caldera depression along normal and antithetic faults. 3) Differentiated lavas are erupted during two stages separated by the opening of a new caldera corresponding to an explosive activity, a silicic cone-sheet system and a collapse structure. 4) Younger volcanic activity restricted to the inside caldera, has presumably emptied the underlying magma reservoir, building a central volcano collapsed along ring internal dip fractures. The relationships between magnetic anomalies and transform faults in the Mascarene basin and observed fissure and faults on Piton des Neiges suggest that volcanism would be structurally controlled. Active volcanism occurring possibly as a result of tension at the intersection of an northeast-southwest fracture zone with the paleorift axis (dated by the magnetic anomaly 27). Models illustrating the gradual evolution of Piton des Neiges would explain successive caldera collapses controlled by the size, the shape and the depth of the magma reservoir.  相似文献   

5.
A three-dimensional model has been used to estimate the location and dimensions of the eruptive fissure for the 24–29 September 1971 eruption along the southwest rift zone of Kilauea volcano, Hawaii. The model is an inclined rectangular sheet embedded in an elastic half-space with constant displacement on the plane of the sheet. The set of best model parameters suggests that the sheet is vertical, extends from a depth of about 2 km to the surface, and has a length of about 14 km. Because this sheet intersects the surface where eruptive vents and extensive ground cracking formed during the eruption, this sheet probably represents the conduit for erupted lava. The amount of displacement perpendicular to the sheet is about 1.9 m, in the middle range of values measured for the amount of opening across the September 1971 eruptive fissure. The thickness of the eruptive fissure associated with the January 1983 east rift zone eruption was determined in an earlier paper to be 3.6 m, about twice the thickness determined here for the September 1971 eruption. Because the lengths (12 km for 1983 and 14 km for 1971) and heights (about 2 km) of the sheet models derived for the January 1983 and September 1971 rift zone eruptions are nearly identical, the greater thickness for the January 1983 eruptive fissure implies that the magma pressure was about a factor of two greater to form the January 1983 eruptive fissure. Because the September 1971 and January 1983 eruptive fissures extent to depths of only a few kilometers, the region of greatest compressive stress produced along the volcano's flank by either of these eruptive fissures would also be within a few kilometers of the surface. Previous work has shown that rift eruptions and intrusions contribute to the buildup of compressive stress along Kilauea's south flank and that this buildup is released by increased seismicity along the south flank. Because south flank earthquakes occur at significantly greater depths, i.e., from 5 to 13 km, than the vertical extent of the 1971 and 1983 eruptiv fissures, the depth of emplacement of these eruptive fissures cannot be the main factor in controlling the hypocentral depths of south flank earthquakes. Two possible explanations for the occurrence of south flank earthquakes in the depth range of 5–13 km are (1) a deeper pressure source, possibly related to deeper magma storage within the rift zone, and (2) a lowstrength region located between 5 and 13 km beneath Kilauea's south flank, possibly at the interface between oceanic sediments and the base of the Hawaiian volcanics.  相似文献   

6.
The east-trending east rift zone of Kilauea volcano on the island of Hawaii is 50 km long and up to 3 km wide. It consists of three elements arranged roughly in three belts from north to south: 1) eruptive fissures, cracks, faults, and narrow grabens, 2) cinder cones (produced by eruptions more localised than the fissure eruptions), and 3) pit craters. Eruptive vents, either fissure or cone, do not occur south of pit craters; vents occur on the floor of some pit craters but are conlined to the north half. Most earthquakes near the rift zone are shallow; they are abundant south of the rift zone but rare north of it. Precise levelling over a 6-year period shows elevation changes of up to 1 metre. Profiles of elevation change across the rift zone are asymmetrically steep on the north side. Precise triangulation shows that points south of the rift have been moving southward at right angles to the rift zone at rates of as much as 10 cm per year. During the major earthquake of 1868, the south coast of the island subsided as much as 2 metres, and abundant evidence indicates other recent subsidence of the south coast. The above facts suggest that the rift zone dips south and that it bounds a large segment of the volcano which is sliding down the steep southern flank. Tensional cracks at the head of this slide tap the shallow central reservoir of the volcano at a depth of a few kilometres. The resulting dikes may feed eruptive fissures in the tensional zone at the head (northernmost part) of the slide, or they may pierce the hanging wall of the south-dipping rift zone through more confined conduits and feed the cinder cones. Likewise, shallow collapse into the rift zone on the north produces narrow grabens, whereas deeper collapse farther south (perhaps aided by magma stoping upward) produces circular pit craters. Submarine topography south of Kilauea caldera indicates a submarine landslide on the south slope of the volcano. The landslide tongue is more than 25 kilometres long and is bounded upslope by a concave escarpment. On land, the northern rim of this escarpment is formed by a series of faults down-dropped on the south, called the Hilina fault system. Dredge hauls from a 300-metre hill on the crest of the landslide tongue at a water depth of 800 metres consists of angular fragments of fresh, glassy, tholeiitic basalt. The high vesicularity of this basalt suggests that it was erupted at a water depth several hundred metres less than that at which it was collected. Presumably, landsliding has carried the lava downward into deeper water.  相似文献   

7.
In April 2007, a caldera collapsed at the Dolomieu summit crater of Piton de La Fournaise (La Réunion Island, Indian Ocean) revealing new outcrops up to 340?m high along the crater walls. The lithostratigraphic interpretation of these new exposures allows us to investigate the most recent building history of a basaltic shield volcano. We present the history of the Piton de La Fournaise terminal cone, from the building of a juvenile cone during which periods of explosive activity dominated, to the most recent effusive period. The changes in eruptive dynamics are the cause of successive summit crater/pit–crater collapses. In April 2007, such an event occurred during rapid emptying of the shallow plumbing system feeding a large effusive lateral eruption. During the most recent effusive period, an eastward migration of the eruptive crater was observed and was linked to the successive destructions of the shallow magma reservoir during each collapse. The resulting changes in the local stress field favor the formation of a new reservoir and thus the migration of activity. Internal structures reveal that the building of the upper part of the terminal cone was predominantly by exogenous growth and that the hydrothermal system is confined at a depth >?350?m. These observations on Piton de La Fournaise provide new insights into construction of the summits of other basaltic shield volcanoes.  相似文献   

8.
The magmatic plumbing system of Kilauea Volcano consists of a broad region of magma generation in the upper mantle, a steeply inclined zone through which magma rises to an intravolcano reservoir located about 2 to 6 km beneath the summit of the volcano, and a network of conduits that carry magma from this reservoir to sites of eruption within the caldera and along east and southwest rift zones. The functioning of most parts of this system was illustrated by activity during 1971 and 1972. When a 29-month-long eruption at Mauna Ulu on the east rift zone began to wane in 1971, the summit region of the volcano began to inflate rapidly; apparently, blockage of the feeder conduit to Mauna Ulu diverted a continuing supply of mantle-derived magma to prolonged storage in the summit reservoir. Rapid inflation of the summit area persisted at a nearly constant rate from June 1971 to February 1972, when a conduit to Mauna Ulu was reopened. The cadence of inflation was twice interrupted briefly, first by a 10-hour eruption in Kilauea Caldera on 14 August, and later by an eruption that began in the caldera and migrated 12 km down the southwest rift zone between 24 and 29 September. The 14 August and 24–29 September eruptions added about 107 m3 and 8 × 106 m3, respectively, of new lava to the surface of Kilauea. These volumes, combined with the volume increase represented by inflation of the volcanic edifice itself, account for an approximately 6 × 106 m3/month rate of growth between June 1971 and January 1972, essentially the same rate at which mantle-derived magma was supplied to Kilauea between 1952 and the end of the Mauna Ulu eruption in 1971.The August and September 1971 lavas are tholeiitic basalts of similar major-element chemical composition. The compositions can be reproduced by mixing various proportions of chemically distinct variants of lava that erupted during the preceding activity at Mauna Ulu. Thus, part of the magma rising from the mantle to feed the Mauna Ulu eruption may have been stored within the summit reservoir from 4 to 20 months before it was erupted in the summit caldera and along the southwest rift zone in August and September.The September 1971 activity was only the fourth eruption on the southwest rift zone during Kilauea's 200 years of recorded history, in contrast to more than 20 eruptions on the east rift zone. Order-of-magnitude differences in topographic and geophysical expression indicate greatly disparate eruption rates for far more than historic time and thus suggest a considerably larger dike swarm within the east rift zone than within the southwest rift zone. Characteristics of the historic eruptions on the southwest rift zone suggest that magma may be fed directly from active lava lakes in Kilauea Caldera or from shallow cupolas at the top of the summit magma reservoir, through fissures that propagate down rift from the caldera itself at the onset of eruption. Moreover, emplacement of this magma into the southwest rift zone may be possible only when compressive stress across the rift is reduced by some unknown critical amount owing either to seaward displacement of the terrane south-southeast of the rift zone or to a deflated condition of Mauna Loa Volcano adjacent to the northwest, or both. The former condition arises when the forceful emplacement of dikes into the east rift zone wedges the south flank of Kilauea seaward. Such controls on the potential for eruption along the southwest rift zone may be related to the topographic and geophysical constrasts between the two rift zones.  相似文献   

9.
Many oceanic island rift zones are associated with lateral sector collapses, and several models have been proposed to explain this link. The North–East Rift Zone (NERZ) of Tenerife Island, Spain offers an opportunity to explore this relationship, as three successive collapses are located on both sides of the rift. We have carried out a systematic and detailed mapping campaign on the rift zone, including analysis of about 400 dykes. We recorded dyke morphology, thickness, composition, internal textural features and orientation to provide a catalogue of the characteristics of rift zone dykes. Dykes were intruded along the rift, but also radiate from several nodes along the rift and form en échelon sets along the walls of collapse scars. A striking characteristic of the dykes along the collapse scars is that they dip away from rift or embayment axes and are oblique to the collapse walls. This dyke pattern is consistent with the lateral spreading of the sectors long before the collapse events. The slump sides would create the necessary strike-slip movement to promote en échelon dyke patterns. The spreading flank would probably involve a basal decollement. Lateral flank spreading could have been generated by the intense intrusive activity along the rift but sectorial spreading in turn focused intrusive activity and allowed the development of deep intra-volcanic intrusive complexes. With continued magma supply, spreading caused temporary stabilisation of the rift by reducing slopes and relaxing stress. However, as magmatic intrusion persisted, a critical point was reached, beyond which further intrusion led to large-scale flank failure and sector collapse. During the early stages of growth, the rift could have been influenced by regional stress/strain fields and by pre-existing oceanic structures, but its later and mature development probably depended largely on the local volcanic and magmatic stress/strain fields that are effectively controlled by the rift zone growth, the intrusive complex development, the flank creep, the speed of flank deformation and the associated changes in topography. Using different approaches, a similar rift evolution has been proposed in volcanic oceanic islands elsewhere, showing that this model likely reflects a general and widespread process. This study, however, shows that the idea that dykes orient simply parallel to the rift or to the collapse scar walls is too simple; instead, a dynamic interplay between external factors (e.g. collapse, erosion) and internal forces (e.g. intrusions) is envisaged. This model thus provides a geological framework to understand the evolution of the NERZ and may help to predict developments in similar oceanic volcanoes elsewhere.  相似文献   

10.
Volcanic gas samples were collected from July to November 1985 from a lava pond in the main eruptive conduit of Pu'u O'o from a 2-week-long fissure eruption and from a minor flank eruption of Pu'u O'o. The molecular composition of these gases is consistent with thermodynamic equilibrium at a temperature slightly less than measured lava temperatures. Comparison of these samples with previous gas samples shows that the composition of volatiles in the magma has remained constant over the 3-year course of this episodic east rift eruption of Kilauea volcano. The uniformly carbon depleted nature of these gases is consistent with previous suggestions that all east rift eruptive magmas degas during prior storage in the shallow summit reservoir of Kilauea. Minor compositional variations within these gas collections are attributed to the kinetics of the magma degassing process.  相似文献   

11.
Active thermal areas are concentrated in three areas on Mauna Loa and three areas on Kilauea. High-temperature fumaroles (115–362° C) on Mauna Loa are restricted to the summit caldera, whereas high-temperature fumaroles on Kilauea are found in the upper East Rift Zone (Mauna Ulu summit fumaroles, 562° C), middle East Rift Zone (1977 eruptive fissure fumaroles), and in the summit caldera. Solfataric activity that has continued for several decades occurs along border faults of Kilauea caldera and at Sulphur Cone on the southwest rift zone of Mauna Loa. Solfataras that are only a few years old occur along recently active eruptive fissures in the summit caldera and along the rift zones of Kilauea. Steam vents and hot-air cracks also occur at the edges of cooling lava ponds, on the summits of lava shields, along faults and graben fractures, and in diffuse patches that may reflect shallow magmatic intrusions.  相似文献   

12.
Ponta de São Lourenço is the deeply eroded eastern end of Madeira’s east–west trending rift zone, located near the geometric intersection of the Madeira rift axis with that of the Desertas Islands to the southeast. It dominantly consists of basaltic pyroclastic deposits from Strombolian and phreatomagmatic eruptions, lava flows, and a dike swarm. Main differences compared to highly productive rift zones such as in Hawai’i are a lower dike intensity (50–60 dikes/km) and the lack of a shallow magma reservoir or summit caldera. 40Ar/39Ar age determinations show that volcanic activity at Ponta de São Lourenço lasted from >5.2 to 4 Ma (early Madeira rift phase) and from 2.4 to 0.9 Ma (late Madeira rift phase), with a hiatus dividing the stratigraphy into lower and upper units. Toward the east, the distribution of eruptive centers becomes diffuse, and the rift axis bends to parallel the Desertas ridge. The bending may have resulted from mutual gravitational influence of the Madeira and Desertas volcanic edifices. We propose that Ponta de São Lourenço represents a type example for the interior of a fading rift arm on oceanic volcanoes, with modern analogues being the terminations of the rift zones at La Palma and El Hierro (Canary Islands). There is no evidence for Ponta de São Lourenço representing a former central volcano that interconnected and fed the Madeira and Desertas rifts. Our results suggest a subdivision of volcanic rift zones into (1) a highly productive endmember characterized by a central volcano with a shallow magma chamber feeding one or more rift arms, and (2) a less productive endmember characterized by rifts fed from deep-seated magma reservoirs rather than from a central volcano, as is the case for Ponta de São Lourenço.  相似文献   

13.
In the present episode of eruptive activity, evidence from seismicity for sustained magma inflow from depth into the edifice of Piton de la Fournaise is lacking. Pre-eruptive main deformation and shallow seismicity help to identify very small volumes of magma that are in motion beneath the rim of the Dolomieu summit crater, and oriented along the azimuth of the future vents. Small magma pockets may reside in the cone above sea level, or may be expelled repeatedly, due to crystallisation in a small, low-velocity, aseismic region below sea level under the high-velocity central plug of the cone in which pre-eruptive earthquake swarms are located. In cross-section the hypocentres define two steep sheets diverging from the aseismic zone at sea level towards 1.5 km above sea level (or 1 km beneath the 2632 m high cone). However, failure induced by increased pressure in the suggested chamber does not account for the observed focal mechanisms.The occurrence and timing of magma transport are attested by eruption, and seismic activity may be related to magma transport. Focal mechanisms document strike-slip, not normal faulting or tensile failure. Vertical propagation of the edge of a feeder dike may enhance strike-slip motion above the edge, in a region where effective normal stress is decreased by thermally induced groundwater flow. The strike-slip mechanisms could also be caused by a tensile-shear widening of the horizontal section of vertical conduits.Fournaise strike-slip earthquakes occur in two orientations, with P axes orthogonal between them, within a single pre-eruptive event. Earthquakes are distributed in the same volume but mechanisms switch from one to another type systematically with time, indicating a reversal of stress conditions. The orientations of P axes with respect to the epicentral trend suggest that in the later parts of events leading to eruptions, a compression of the medium occurs after a dilation in the first part. The activated zone might respond successively to the arrival and the departure of the magma on its way from the reservoir at depth to the vent, radial to the cone.  相似文献   

14.
 The Pu'u 'Ō'ō-Kūpaianaha eruption on the east rift zone of Kīlauea began in January 1983. The first 9 years of the eruption were divided between the Pu'u 'Ō'ō (1983–1986) and Kūpaianaha (1986–1992) vents, each characterized by regular, predictable patterns of activity that endured for years. In 1990 a series of pauses in the activity disturbed the equilibrium of the eruption, and in 1991, the output from Kūpaianaha steadily declined and a short-lived fissure eruption broke out between Kūpaianaha and Pu'u 'Ō'ō. In February 1992 the Kūpaianaha vent died, and, 10 days later, eruptive episode 50 began as a fissure opened on the uprift flank of the Pu'u 'Ō'ō cone. For the next year, the eruption was marked by instability as more vents opened on the flank of the cone and the activity was repeatedly interrupted by brief pauses in magma supply to the vents. Episodes 50–53 constructed a lava shield 60 m high and 1.3 km in diameter against the steep slope of the Pu'u 'Ō'ō cone. By 1993 the shield was pockmarked by collapse pits as vents and lava tubes downcut as much as 29 m through the thick deposit of scoria and spatter that veneered the cone. As the vents progressively lowered, the level of the Pu'u 'Ō'ō pond also dropped, demonstrating the hydraulic connection between the two. The downcutting helped to undermine the prominent Pu'u 'Ō'ō cone, which has diminished in size both by collapse, as a large pit crater formed over the conduit, and by burial of its flanks. Intervals of eruptive instability, such as that of 1991–1993, accelerate lateral expansion of the subaerial flow field both by producing widely spaced vents and by promoting surface flow activity as lava tubes collapse and become blocked during pauses. Received: 1 July 1997 / Accepted: 23 October 1997  相似文献   

15.
Abstract Multi- and single-channel seismic profiles are used to investigate the structural evolution of back-arc rifting in the intra-oceanic Izu-Bonin Arc. Hachijo and Aoga Shima Rifts, located west of the Izu-Bonin frontal arc, are bounded along-strike by structural and volcanic highs west of Kurose Hole, North Aoga Shima Caldera and Myojin Sho arc volcanoes. Zig-zag and curvilinear faults subdivide the rifts longitudinally into an arc margin (AM), inner rift, outer rift and proto-remnant arc margin (PRA). Hachijo Rift is 65 km long and 20–40 km wide. Aoga Shima Rift is 70 km long and up to 45 km wide. Large-offset border fault zones, with convex and concave dip slopes and uplifted rift flanks, occur along the east (AM) side of the Hachijo Rift and along the west (PRA) side of the Aoga Shima Rift. No cross-rift structures are observed at the transfer zone between these two regions; differential strain may be accommodated by interdigitating rift-parallel faults rather than by strike- or oblique-slip faults. In the Aoga Shima Rift, a 12 km long flank uplift, facing the flank uplift of the PRA, extends northeast from beneath the Myojin Knoll Caldera. Fore-arc sedimentary sequences onlap this uplift creating an unconformity that constrains rift onset to ～1-2Ma. Estimates of extension (～3km) and inferred age suggest that these rifts are in the early syn-rift stage of back-arc formation. A two-stage evolution of early back-arc structural evolution is proposed: initially, half-graben form with synthetically faulted, structural rollovers (ramping side of the half-graben) dipping towards zig-zagging large-offset border fault zones. The half-graben asymmetry alternates sides along-strike. The present ‘full-graben’ stage is dominated by rift-parallel hanging wall collapse and by antithetic faulting that concentrates subsidence in an inner rift. Structurally controlled back-arc magmatism occurs within the rift and PRA during both stages. Significant complications to this simple model occur in the Aoga Shima Rift where the east-dipping half-graben dips away from the flank uplift along the PRA. A linear zone of weakness caused by the greater temperatures and crustal thickness along the arc volcanic line controls the initial locus of rifting. Rifts are better developed between the arc edifices; intrusions may be accommodating extensional strain adjacent to the arc volcanoes. Pre-existing structures have little influence on rift evolution; the rifts cut across large structural and volcanic highs west of the North Aoga Shima Caldera and Aoga Shima. Large, rift-elongate volcanic ridges, usually extruded within the most extended inner rift between arc volcanoes, may be the precursors of sea floor spreading. As extension continues, the fissure ridges may become spreading cells and propagate toward the ends of the rifts (adjacent to the arc volcanoes), eventually coalescing with those in adjacent rift basins to form a continuous spreading centre. Analysis of the rift fault patterns suggests an extension direction of N80°E ± 10° that is orthogonal to the trend of the active volcanic arc (N10°W). The zig-zag pattern of border faults may indicate orthorhombic fault formation in response to this extension. Elongation of arc volcanic constructs may also be developed along one set of the possible orthorhombic orientations. Border fault formation may modify the regional stress field locally within the rift basin resulting in the formation of rift-parallel faults and emplacement of rift-parallel volcanic ridges. The border faults dip 45–55° near the surface and the majority of the basin subsidence is accommodated by only a few of these faults. Distinct border fault reflections decreases dips to only 30° at 2.5 km below the sea floor (possibly flattening to near horizontal at 2.8 km although the overlying rollover geometry shows a deeper detachment) suggesting that these rifting structures may be detached at extremely shallow crustal levels.  相似文献   

16.
Summit pit craters are found in many types of volcanoes and are generally thought to be the product of collapse into an underpressured reservoir caused by magma withdrawal. We investigate the mechanisms and structures associated with summit pit crater formation by scaled analogue experiments and make comparisons with natural examples. Models use a sand plaster mixture as analogue rock over a cylinder of silicone simulating an underpressured magma reservoir. Experiments are carried out using different roof aspect ratios (roof thickness/roof width) of 0.2–2. They reveal two basic collapse mechanisms, dependant on the roof aspect ratio. One occurs at low aspect ratios (≤1), as illustrated by aspect ratios of 0.2 and 1. Outward dipping reverse faults initiated at the silicone margins propagates through the entire roof thickness and cause subsidence of a coherent block. Collapse along the reverse faults is accommodated by marginal flexure of the block and tension fractures at the surface (aspect ratio of 0.2) or by the creation of inward dipping normal faults delimiting a terrace (aspect ratio of 1). At an aspect ratio of 1, overhanging pit walls are the surface expressions of the reverse faults. Experiments at high aspect ratio (>1.2) reveal a second mechanism. In this case, collapse occurs by stopping, which propagates upwards by a complex pattern of both reverse faults and tension fractures. The initial underground collapse is restricted to a zone above the reservoir and creates a cavity with a stable roof above it. An intermediate mechanism occurs at aspect ratios of 1.1–1.2. In this case, stopping leads to the formation of a cavity with a thin and unstable roof, which collapses suddenly. The newly formed depression then exhibits overhanging walls. Surface morphology and structure of natural examples, such as the summit pit craters at Masaya Volcano, Nicaragua, have many of the features created in the models, indicating that the internal structural geometry of experiments can be applied to real examples. In particular, the surface area and depth of the underpressured reservoir can be roughly estimated. We present a morphological analysis of summit pit craters at volcanoes such as Kilimanjaro (Tanzania), San Cristobal, Telica and Masaya (Nicaragua), and Ubinas (Peru), and indicate a likely type of subsidence and possible position of the former magma reservoir responsible for collapse in each case.  相似文献   

17.
Piton de la Fournaise, on the island of La Réunion, and Kilauea volcano, on the island of Hawaii, are active, basaltic shield volcanoes growing on the flanks of much larger shield volcanoes in intraplate tectonic environments. Past studies have shown that the average rate of magma production and the chemistry of lavas are quite similar for both volcanoes. We propose a structural similarity — specifically, that periodic displacement of parts of the shields as huge landslide blocks is a common mode of growth. In each instance, the unstable blocks are within a rift-zone-bounded, unbuttressed flank of the shield. At Kilauea, well-documented landslide blocks form relatively surficial parts of a much larger rift-zone-bounded block; scarps of the Hilina fault system mark the headwalls of the active blocks. At Fournaise, Hilina-like slump blocks are also present along the unbuttressed east coast of the volcano. In addition, however, the existence of a set of faults nested around the present caldera and northeast and southeast rift zones suggests that past chapters in the history of Fournaise included the slumping of entire rift-zone-bounded blocks themselves. These nested faults become younger to the east southeast and apparently record one of the effects of a migration of the focus of volcanism in that direction. Repeated dilation along the present set of northeast and southeast rift zones, most recently exemplified by an eruption in 1977, suggests that the past history of rift-zone-bounded slumping will eventually be repeated. The record provided by the succession of slump blocks on Fournaise is apparently at a relatively detailed part of a migration of magmatic focus that has advanced at least 30 km to the east-southeast from neighboring Piton des Neiges, an extinct Pliocene to Pleistocene volcano.  相似文献   

18.
From May 1985 to April 1986 five discrete eruptions have occurred at Piton de la Fournaise volcano. On March the 17th, a sixth episode began with four distinct stages. They took place along the southeast rift zone of the volcano, from the summit to the sea coast. It was the first rift zone eruption in the south since 1800 A.D. and the first ever monitored at Piton de la Fournaise volcano.Three fissural vents opened at decreasing altitude emitting about 12 to 15 × 106 m3 of olivine basalts between 19th March and 1st April. Strong seismic activity was accompanied by deformation of the summit area, and large-scale variations of the magnetic field. A summital event characterized the end of the flank activity with collapse of a new pit-crater and outflow of small amounts of degassed aphyric basalt.  相似文献   

19.
Analysis of the historical records of Etnas eruptive activity for the past three centuries shows that, after the large 1669 eruption, a period of about 60 years of low-level activity followed. Starting from 1727, explosive activity (strombolian, lava fountaining and subplinian) at the summit crater increased exponentially to the present day. Since 1763, the frequency of flank eruptions also increased and this value remained high until 1960; afterward it further increased sharply. In fact, the number of summit and flank eruptions between 1961 and 2003 was four times greater than that of the pre-1960 period. This long-term trend of escalating activity rules out a pattern of cyclic behaviour of the volcano. We propose instead that the 1670–2003 period most likely characterises a single eruptive cycle which began after the large 1669 eruption and which is still continuing.On the basis of the eruptive style, two distinct types of flank eruptions are recognised: Class A and Class B. Class A eruptions are mostly effusive with associated weak strombolian activity; Class B eruptions are characterised by effusive activity accompanied by intense, long-lasting, strombolian and lava fountaining activity that produces copious tephra fallouts, as during the 2001 and 2002–2003 eruptions. Over the past three centuries, seven Class B eruptions have taken place with vents located mainly on the south-eastern flank, indicating that this sector of the volcano is a preferential zone for the intrusion of volatile-rich magma rising from the deeper region of the Etna plumbing system.Electronic Supplementary Material Supplementary material is available for this article at Editorial responsibility: M. Carroll  相似文献   

20.
Socorro Island is the summit of a large volcanic mountain located on the Clarion Fracture Zone in the east Pacific. Two major periods of volcanic activity can be recognized on the island. The first (pre-caldera) period was characterized by eruptions of olivine-poor alkali basalt, followed by quiet effusion of soda rhyolite including varieties transitional to pantellerite. This period of activity terminated with the formation of a caldera by collapse. A relatively prolonged period of quiescence ended with rifting and down-faulting of the western side of the island along a north-south fracture system, accompanied by violently explosive eruptions of soda rhyolite which built a large tephra cone over the position of the old caldera. The locus of eruptive activity moved outward and downward along tension fractures and old tectonic rifts as the central vents became blocked by domes of dense obsidian. Low level eruptions of viscous soda rhyolite including pantellerite commenced without preliminary explosive eruptions and built numerous endogenous and exogenous domes. Basaltic eruptions were rare and confined to low-level vents. During the growth of the volcano the direction of active rifting appears to have changed from east-west to northwest-southeast to north-south. Little is known of the submarine portion of the volcano, but the topography seems to reflect the three directions of rifting. The oldest submarine lavas are assumed to be basaltic and are probably of late Tertiary age. The eruptive history of Socorro suggests that the underlying magma column became stratified toward the end of the active period.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号