首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
High-resolution topography data sets have improved the spatial and temporal scales at which we are able to investigate the landscape through the analysis of landform attributes and the computation of topographic changes. Yet, to date, there have been only limited attempts to infer key geomorphic processes in terms of contributions to shaping the landscape. Highly erodible landscapes such as badlands provide an ideal demonstration of such an approach owing to the rapid changes observed over a relatively short time frame. In this technical note we present the Mapping Geomorphic Processes in the Environment (MaGPiE): a new algorithm that allows mapping of geomorphic process signatures through analysis of repeat high-resolution topography data sets. The method is demonstrated in an experimental badland located in the southern central Pyrenees. MaGPiE is a geographic information system (GIS)-based algorithm that uses as input: (a) terrain attributes (i.e. Slope, Roughness and Concentrated Runoff Index) extracted from digital elevation models (DEMs), and (b) a map of topographic changes (DEM of difference, DoD). Initial results demonstrate that MaGPiE allows the magnitude and the spatial distribution of the main geomorphic processes reshaping badlands to be inferred for the first time. © 2020 John Wiley & Sons, Ltd.  相似文献   

2.
Connectivity describes the efficiency of material transfer between geomorphic system components such as hillslopes and rivers or longitudinal segments within a river network. Representations of geomorphic systems as networks should recognize that the compartments, links, and nodes exhibit connectivity at differing scales. The historical underpinnings of connectivity in geomorphology involve management of geomorphic systems and observations linking surface processes to landform dynamics. Current work in geomorphic connectivity emphasizes hydrological, sediment, or landscape connectivity. Signatures of connectivity can be detected using diverse indicators that vary from contemporary processes to stratigraphic records or a spatial metric such as sediment yield that encompasses geomorphic processes operating over diverse time and space scales. One approach to measuring connectivity is to determine the fundamental temporal and spatial scales for the phenomenon of interest and to make measurements at a sufficiently large multiple of the fundamental scales to capture reliably a representative sample. Another approach seeks to characterize how connectivity varies with scale, by applying the same metric over a wide range of scales or using statistical measures that characterize the frequency distributions of connectivity across scales. Identifying and measuring connectivity is useful in basic and applied geomorphic research and we explore the implications of connectivity for river management. Common themes and ideas that merit further research include; increased understanding of the importance of capturing landscape heterogeneity and connectivity patterns; the potential to use graph and network theory metrics in analyzing connectivity; the need to understand which metrics best represent the physical system and its connectivity pathways, and to apply these metrics to the validation of numerical models; and the need to recognize the importance of low levels of connectivity in some situations. We emphasize the value in evaluating boundaries between components of geomorphic systems as transition zones and examining the fluxes across them to understand landscape functioning. © 2018 John Wiley & Sons, Ltd.  相似文献   

3.
This is the era of digital landscapes; the widespread availability of powerful sensing technologies has revolutionized the way it is possible to interrogate landscapes in order to understand the processes sculpting them. Vastly greater areas have now been acquired at ‘high resolution’: currently tens of metres globally to millimetric precision and accuracy locally. This permits geomorphic features to be visualized and analysed across the scales at which Earth‐surface processes operate. Especially exciting is the capturing of process dynamics in repeated surveying, which will only become more important with low‐cost accessible data generation through techniques such as Structure from Motion (SfM). But the key challenge remains; to interpret high resolution Digital Terrain Models (DTMs), particularly by extracting geomorphic features in robust and objective ways and then linking the observed features to the underlying physical processes. In response to the new data and challenges, recent years have seen improved processing of raw data into DTMs, development of data fusion techniques, novel quantitative analysis of topographic data, and innovative geomorphological mapping. The twelve papers collected in this volume sample this progress in interrogating Earth‐surface processes through the analysis of DTMs. They cover a wide range of disciplines and spatio‐temporal scales, from landslide prone landscapes, to agriculturally modified regions, to mountainous landscapes, and coastal zones. They all, however, showcase the quantitative exploitation of information contained in high‐resolution topographic data that we believe will underpin the improvement of our understanding of many elements of Earth‐surface processes. Most of the papers introduced here were first presented in a conference session at the European Geosciences Union General Assembly in 2011. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

4.
Gully and badland erosion constitute important land‐degradation processes with severe on‐site and off‐site effects above all in sedimentary deposits and alluvial soils of the arid and semi‐arid regions. Agricultural use of the affected land is impeded both by the irreversible loss of topsoil and the morphological dissection of the terrain. In various badland regions around the world, a solution to the latter problem is attempted by infilling of gullies and levelling of badland topography in order restore a morphology suitable for agricultural cultivation. Gully and badland levelling for agricultural reclamation has been conducted for decades in the large ravine lands of India. This study aims at analysing the distribution and dynamics of land levelling within the Chambal badlands in Morena district, Madhya Pradesh, between 1971 and 2015. Using high to medium resolution satellite images from the Corona, Landsat, Aster and RapidEye missions and a multi‐temporal classification approach, we have mapped and quantified areas that were newly levelled within eight observation periods. We analysed the spatial relation of levelled land to several physical and socio‐economic factors that potentially influence the choice of reclamation site by employing geographic information system (GIS) analysis methods and results from focus‐group discussions in selected villages. Results show that nearly 38 km2 or 23% of the badlands in the study area have been levelled within 45 years. The levelling rate generally increases during the observation period, but the annual variability is high. We have found spatial relationships to badland morphology, vicinity of existing cropland and proximity to villages and drainage lines. From a socio‐economic point of view, availability of financial and technical means, access rights to the badland and ownership issues play an important role. Considering studies on soil degradation caused by levelling of badlands in other regions, the sustainability of the newly reclaimed fields in the Chambal badlands is questionable. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

5.
Soil erosion is one of the most severe land degradation processes in the Mediterranean region. Although badlands occupy a relatively small fraction of the Mediterranean area, their erosion rates are very high. Many studies have investigated to what extent vegetation controls soil erosion rates. This study, however, deals with the impact of erosion on vegetation establishment. In semi‐arid badlands of the Mediterranean, soil water availability constitutes the main limiting factor for vegetation development. As a consequence, south‐facing slopes are typically less vegetated due to a very large water stress. However, these findings do not necessarily apply to humid badlands. The main objective of this paper is to determine the topographic thresholds for plant colonization in relation to slope aspect and to assess the spatial patterns of vegetation cover and species richness. We surveyed 179 plots on highly eroded badland slopes in the Central Pyrenees. We defined four aspect classes subdivided into slope angle classes. Colonization success was expressed in terms of vegetation cover and species richness. Slope angle thresholds for plant colonization were identified for each slope aspect class by means of binary logistic regressions. The results show that a critical slope angle exists below which plants colonize the badland slopes. Below this critical slope angle, plant cover and species richness increase with a decreasing slope angle. The largest critical slope angles in humid badlands are observed on south‐facing slopes, which contrasts with the results obtained in semi‐arid badlands. North‐facing slopes however are characterized by a reduced overall vegetation cover and species richness, and lower topographic threshold values. The possible underlying processes responsible for this slope‐aspect discrepancy in vegetation characteristics are discussed in terms of environmental variables that control regolith development, weathering and erosion processes. Moreover, possible restoration strategies through the use of vegetation in highly degraded environments are highlighted. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

6.
Land degradation in South Africa has been of concern for more than 100 years with both climate change and inappropriate land management (overgrazing) being proposed as primary drivers. However, there are few quantitative studies of degradation and, in particular, few of erosion by water. Badlands, taken here to be the landform which results from extreme erosion, have been notably neglected. We report on 13 consecutive years of erosion pin measurements of badland erosion on 10 study sites in the Sneeuberg uplands of the eastern Karoo in South Africa. The study sites are on Holocene colluvium which mantles footslopes. They have been subject to overgrazing for at least 100 years, c. 1850–1950. Currently they are lightly grazed by sheep. The area receives about 500 mm rainfall per year. The sites are remote, with only informal, farmer‐operated, daily raingauges nearby. The nearest sub‐daily raingauge is c. 55 km distant. Also we report on an analysis of the erosion pin data which focuses on establishing the origins and context of the badlands, including the relationship between study sites and adjacent valley‐bottom gully systems; compare erosion rates on our study sites with rates determined by erosion pins on other badland sites; and discuss the implications of these erosion rates for landscape development and off‐site impacts. Net erosion rates on the study sites are relatively high compared with global badland rates and range from 3.1 to 8.5 mm yr‐1 which may be extrapolated to 53 to 145 t ha yr‐1 (using a measured bulk density of 1.7 g cm‐3). However, comparisons with badland sites elsewhere are difficult because of different measuring methodologies, lithologies, climate and dominant processes. Erosion rates on the study sites are strongly influenced by rainfall amounts and, in particular, by daily rainfall events which exceed ~10 mm: this is the threshold intensity at which runoff has been observed to commence on badlands. Of significance, but of lesser influence, is weathering, mainly by wetting and drying: this prepares bare surfaces for erosion. However, questions remain regarding the role of site characteristics, and of processes at each site, in determining between‐site differences in erosion rate. Crude extrapolation of current rates of erosion, in conjunction with depths of incision into the badlands, suggests that badland development started around 200 years ago, probably as a response to the introduction of European‐style stock farming which resulted in overgrazing. We assume, but cannot quantify, the additional influence of periods of drought and burning in the erosional history of the area. Intermittent connection of these badlands to valley‐bottom gullies and therefore to small farm dams and ultimately to large water storage reservoirs increases their impact on local water resources. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

7.
Four areas were selected to represent a range of processes characteristic of badland surfaces in southeast Spain: Petrer and Monnegre in Alicante, Vera and Tabernas in Almería. At Petrer, rilling and swelling processes produce a deeply cracked surface drained by a finely textured network of shallow rills. At Monnegre, piping and rilling are differentially developed on slopes ultimately controlled by basal incision. At Vera, aspect-controlled lichen and vegetation cover produce a sequence of badland development within which the relative importance of piping, mass movement and rilling varies through the sequence. At Tabernas, simple overland flow is the dominant process, but aspect influences rill network density and badland evolution. The factors controlling badland development can be grouped into those related to gross morphology, to surface cover and runoff generation, and to material properties. These factors are effective over varying timescales, implying that morphological response times differ among the selected badlands.  相似文献   

8.
Landscapes subject to constant forcing tend to evolve toward equilibrium states in which individual landforms have similar characteristics. Yet, even in landscapes at or near equilibrium, there can be significant variability among individual landforms. Furthermore, sites subject to similar processes and conditions can have different mean landform characteristics. This variability is often ascribed to on‐going transient evolution, or to heterogeneity in processes, material properties, forcing, or boundary conditions. Three surprising outcomes of landform evolution models suggest, however, that such variability could arise in equilibrium landscapes without any heterogeneity in the physical processes shaping the topography. First, homogeneous systems subjected to constant forcing can generate a heterogeneous distribution of equilibrium landforms. Second, even simple non‐linear systems can have multiple stable equilibrium states. Third, evolving landscapes can exhibit path dependence and hysteresis. We show how these three mechanisms can produce variability in landforms that arises from the characteristics of the initial topographic surface rather than from heterogeneity in geomorphic processes. Numerical experiments on the formation of low‐order fluvial valleys and transportational cyclic steps in erodible streambeds illustrate why it is important to consider the influence of initial conditions when comparing models with natural topography, estimating the uncertainty of model predictions, and studying how landscapes respond to disturbances. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

9.
Predicting the location of gully heads in various environments is an important step towards predicting gully erosion rates. So far, field data collection and modelling of topographic thresholds for gully head development has mainly focused on gullies that formed in forested areas, rangelands, pastures and cropland. Such information for gullies in badlands however is very scarce. Therefore, this paper aims to extend the database on gully head topographical thresholds through data collection in a badland area and to improve the prediction of gully heads forming at sites with a very low erosion resistance value. For this, we chose a badland site located in central Italy that is characterized by biancana forms and both active and dormant gullies. The definition of the conditions under which present‐day gully heads developed allowed a better modelling of the gully head threshold equation, with modification of a previous model and the exemplification of how to use the updated model. The model shows that the resistance to gully head retreat depends on slope gradient and drainage area at gully heads, land use at the moment of gully development (as numerically expressed using parameters derived from the Runoff Curve Number method), surface rock fragment cover, presence of joints, pipes, and factors/processes affecting detachment rate. This study attempted to better understand environmental conditions that control the development of gully heads in badlands through a combination of field data collection of gully heads, an analysis of land use changes over 10 centuries, focusing on the period 1820–2005, and land use management through repeat photography and a critical examination of historical documents. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

10.
Geomorphic effectiveness has been an influential concept in geomorphology since its introduction by Reds Wolman and John Miller in 1960. It provided a much needed framework to assess the significance of an event by comparing event magnitude to the resultant geomorphic effects. Initially, this concept was applied primarily in river channels, under the linear assumption that geomorphic responses to similarly sized flood events will be consistent. Numerous authors have since attempted to quantify a direct, proportional relationship between event magnitude and different forms of geomorphic response in a variety of geomorphic settings. In doing so, these investigations applied an array of metrics that were difficult to compare across different spatiotemporal scales, and physiographic and geomorphic environments. Critically, the emergence of other geomorphic concepts such as sensitivity, connectivity, thresholds, and recovery has shown that relationships between causes (events) and geomorphic effects (responses) are often complex and non‐linear. This paper disentangles the complex historical development of the geomorphic effectiveness concept and reviews the utility of various metrics for quantifying effectiveness. We propose that total energy (joules) is the most appropriate metric to use for quantifying the magnitude of disturbance events (cause) and volumetric sediment flux associated with landform modification is the most appropriate metric for quantifying geomorphic effects. While both metrics are difficult to quantify, they are the only ones which facilitate comparison across a range of spatiotemporal scales (comparability) in a variety of geomorphic environments (flexibility). The geomorphic effectiveness concept can continue to be useful provided that geomorphologists use flexible and comparable metrics. Today, geomorphologists are better prepared to consider the influence of non‐linear processes on determinations of geomorphic effectiveness, allowing investigators to not only determine if a disturbance event was effective but also to explain why or why not. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

11.
A drainage basin simulation model is used to interpret the morphometry and historical evolution of Mancos Shale badlands in Utah. High relief slopes in these badlands feature narrow divides and linear profiles due to threshold mass-wasting. Threshold slopes become longer in proportion to erosion rate, implying lower drainage density and higher relief. By contrast, in slowly eroding areas of low relief, both model results and observations indicate that drainage density increases with relief, suggesting control by critical shear stress. Field relationships and simulation modelling indicate that the badlands have resulted from rapid downcutting of the master drainage below an Early Wisconsin terrace to the present river level, followed by base level stability. As a result, Early Wisconsin alluvial surfaces on the shale have been dissected up to 62 m into steep badlands, and a Holocene alluvial surface is gradually replacing the badland slopes which are erocing by parallel retreat. © 1997 by John Wiley & Sons, Ltd.  相似文献   

12.
The ability to quantify the processes driving geomorphic change in river valley margins is vital to geomorphologists seeking to understand the relative role of transport mechanisms (e.g. fluvial, aeolian, and hillslope processes) in landscape dynamics. High‐resolution, repeat topographic data are becoming readily available to geomorphologists. By contrasting digital elevation models derived from repeat surveys, the transport processes driving topographic changes can be inferred, a method termed ‘mechanistic segregation.’ Unfortunately, mechanistic segregation largely relies on subjective and time consuming manual classification, which has implications both for its reproducibility and the practical scale of its application. Here we present a novel computational workflow for the mechanistic segregation of geomorphic transport processes in geospatial datasets. We apply the workflow to seven sites along the Colorado River in the Grand Canyon, where geomorphic transport is driven by a diverse suite of mechanisms. The workflow performs well when compared to field observations, with an overall predictive accuracy of 84% across 113 validation points. The approach most accurately predicts changes due to fluvial processes (100% accuracy) and aeolian processes (96%), with reduced accuracy in predictions of alluvial and colluvial processes (64% and 73%, respectively). Our workflow is designed to be applicable to a diversity of river systems and will likely provide a rapid and objective understanding of the processes driving geomorphic change at the reach and network scales. We anticipate that such an understanding will allow insight into the response of geomorphic transport processes to external forcings, such as shifts in climate, land use, or river regulation, with implications for process‐based river management and restoration. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

13.
Fractures are discontinuities in rock that can be exploited by erosion. Fractures regulate cohesion, profoundly affecting the rate, style, and location of Earth surface processes. By modulating the spatial distribution of erodibility, fractures can focus erosion and set the shape of features from scales of fluvial bedforms to entire landscapes. Although early investigation focused on fractures as features that influence the orientation and location of landforms, recent work has started to discern the mechanisms by which fractures influence the erodibility of bedrock. As numerical modeling and field measurement techniques improve, it is rapidly becoming feasible to determine how fractures influence geomorphic processes, as opposed to when or where. However, progress is hampered by a lack of research coordination across scales and process domains. We review studies from hillslope, glacial, fluvial, and coastal domains from the scale of reaches and outcrops to entire landscapes. We then synthesize this work to highlight similarities across domains and scales and suggest knowledge gaps, opportunities, and methodological challenges that need to be solved. By integrating knowledge across domains and scales, we present a more holistic conceptualization of fracture influences on geomorphic processes. This conceptualization enables a more unified framework for future investigation into fracture influences on Earth surface dynamics. © 2018 John Wiley & Sons, Ltd.  相似文献   

14.
  相似文献   

15.
Digital terrain models (DTMs) are a standard data source for a variety of applications. DTM differencing is also widely used for detection and quantification of topographic changes. While several investigations have been made on the accuracy of DTMs, calculated from different kinds of input data, little has been published on the error of DTM differencing, specifically for the quantification of geomorphological processes. In this study, an extensive, multi‐temporal set of airborne laser scanning (ALS) data is used to investigate the accuracy of topographic change calculations in a high alpine environment, caused by different geomorphic processes. Differences from DTMs with cell sizes ranging from 0.25 m to 10 m were calculated and compared to very accurate point‐to‐point calculations for a variety of processes and in nearby stable areas which show no significant surface changes. The representativeness of the DTM differences is then compared to the terrain slope and surface roughness of the investigated areas to show the influence of these parameters on the errors in the differences. Those errors are then taken into account for analyses of the applicability of different cell sizes for the investigation of geomorphic processes with different magnitudes and over different time periods. The analyses show that the error of DTM differences increases with lower point densities and higher roughness and slope values. The higher the error, the greater the differences between two elevation datasets have to be in order to quantify certain morphodynamic processes. Lower point densities and higher roughness and slope values require greater process rates or longer time intervals in order to obtain valid results. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

16.
Geomorphic processes operate at multiple spatio-temporal scales and different levels of hierarchy. It is therefore necessary to understand the linkages of landscapes across various scales and levels to gain insights into their interactions and feedbacks. Connectivity is an emergent property of the hydro-geomorphic systems, and it is gradually evolving into a unifying concept in geomorphology. The connectivity approach has the potential to be applied extensively to diverse hydro-geomorphic systems of India to understand their complexity as well as for designing effective management practices for river systems and wetlands, optimizing water resources for agriculture, and monitoring and restoration of habitats. Studies on connectivity, particularly in geomorphic context, have been growing steadily in India, albeit at a much slower pace compared to the global trends. This article undertakes a brief overview of the global developments particularly in terms of providing some clarity among the different types of geomorphic connectivity and their inter-relationships and feedbacks. We then take stock of the connectivity research in India in recent years as applied in different hydrogeomorphic systems across the country. We utilize a number of Indian case studies to illustrate the important developments and applications of connectivity concepts, and also present future perspective of this important field with special relevance to India. © 2020 John Wiley & Sons, Ltd.  相似文献   

17.
Badland areas provide some of the highest erosion rates globally. Most studies of erosion have insufficient lengths of record to interrogate the impacts of decadal‐scale changes in precipitation on rates of badland erosion in regions such as the Mediterranean, which are known to be sensitive to land degradation and desertification. Erosion measurements, derived from field monitoring using erosion pins, in southern Italy during the period 1974–2004 are used to explore the impacts of changing precipitation patterns on badland erosion. Erosion on badland inter‐rill areas is strongly correlated with cumulative rainfall over each monitoring period. Annual precipitation has a substantial dynamic range, but both annual and winter (December, January, February) rainfall amounts in southern Italy show a steady decrease over the period 1970–2000. The persistence of positive values of the winter North Atlantic Oscillation index in the period 1980–2000 is correlated with a reduction in the winter rainfall amounts. Future climate scenarios show a reduction in annual rainfall across the western and central Mediterranean which is likely to result in a further reduction in erosion rates in existing badlands. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

18.
Past river classifications use incommensurate typologies at each spatial scale and do not capture the pivotal role of topographic variability at each scale in driving the morphodynamics responsible for evolving hierarchically nested fluvial landforms. This study developed a new way to create geomorphic classifications using metrics diagnostic of individual processes the same way at every spatial scale and spanning a wide range of scales. We tested the approach on flow convergence routing, a geomorphically and ecologically important process with different morphodynamic states of erosion, routing, and deposition depending on the structure of nondimensional topographic variability. Five nondimensional landform types with unique functionality represent this process at any flow; they are nozzle, wide bar, normal channel, constricted pool, and oversized. These landforms are then nested within themselves by considering their longitudinal sequencing at key flows representing geomorphically important stages. A data analysis framework was developed to answer questions about the stage‐dependent spatial structure of topographic variability. Nesting permutations constrain and reveal how flow convergence routing morphodynamics functions in any river the framework is applied to. The methodology may also be used with other physical and biological datasets to evaluate the extent to which the patterning in that data is influenced by flow convergence routing. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

19.
Geomorphic river design strives for natural resilience by encouraging geomorphic form complexity and morphological processes linked to greater habitat diversity. Increasing availability of high-resolution topographic data and spatial feature mapping methods provide advantages for morphological analysis and river restoration planning. We propose and evaluate an approach to quantifying topographic variability of geomorphic form and pixel-level surface roughness resulting from channel planform geometry differences using spatially continuous variety computation applied to component metrics including flow direction, aspect and planform curvature. We define this as the geomorphic form variation (GFV) approach and found it scalable, repeatable and a multi-stage analytical metric for quantifying physical aspects of river-bed topographic variability. GFV may complement process-based morphological feature mapping applications, hydraulic assessment indices and spatial habitat heterogeneity metrics commonly used for ecological quality evaluation and river restoration. The GFV was tested on controlled synthetic channels derived from River Builder software and quasi-controlled sinuous planform flume experiment channels. Component variety metrics respond independently to specific geometric surface changes and are sensitive to multi-scaled morphology change, including coarser-grained sediment distributions of pixel-level surface roughness. GFV showed systematic patterns of change related to the effects of channel geometry, vertical bed feature (pool-bar) frequency and amplitude, and bar size, shape and orientation. Hotspot analysis found that bar margins were major components of topographic complexity, whereas grain-scale variety class maps further supported the multi-stage analytical capability and scalability of the GFV approach. The GFV can provide an overall variety value that may support river restoration decision-making and planning, particularly when geomorphic complexity enhancement is a design objective. Analysing metric variety values with statistically significant hotspot cluster maps and complementary process-based software and mapping applications allows variety correspondence to systematic feature changes to be assessed, providing an analytical approach for river morphology change comparison, channel design and geomorphic process restoration.  相似文献   

20.
Regulated rivers generally incise below dams that cut off sediment supply, but how that happens and what the consequences are at different spatial scales is poorly understood. Modern topographic mapping at meter‐scale resolution now enables investigation of the details of spatial processes. In this study, spatial segregation was applied to a meter‐scale raster map of topographic change from 1999 to 2008 on the gravel‐cobble, regulated lower Yuba River in California to answer specific scientific questions about how a decadal hydrograph that included a flood peak of 22 times bankfull discharge affected the river at segment, reach, and morphological unit scales. The results show that the river preferentially eroded sediment from floodplains compared to the channel, and this not only promoted valley‐wide sediment evacuation, but also facilitated the renewal and differentiation of morphological units, especially in the channel. At the reach scale, area of fill and mean net rate of elevational change were directly correlated with better connectivity between the channel and floodplain, while the mean rate of scour in scour areas was influenced by the ratio of slope to bankfull Froude number, a ratio indicative of lateral migration versus vertical downcutting. Hierarchical segregation of topographic change rasters proved useful for understanding multi‐scalar geomorphic dynamics. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号