首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Hydraulic engineering is usually based on theoretical analysis and/or numerical modelling simulation. As the dynamic behaviour of sediment movement under unsteady flow is still unclear, and field measurement is comparatively difficult during a large flood, prior investigations through flume experiments are required. A series of flume experiments, conducted using different inflow hydrographs without sediment supply from upstream, was carried out to investigate the sediment transport process under unsteady flow conditions. A series of triangular hydrographs were performed in the experiments. The results indicate that a temporal lag was found between the flow hydrograph peak and the sediment hydrograph peak because large size sand dunes lasted for a short period in the falling limb of the flow hydrograph. The temporal lag was found to be about equal to 6–15% of the flow hydrograph duration. Owing to the temporal lag, the total bedload yield in the rising period was less than that in the falling period. Furthermore, the measured total bedload yield in the unsteady flow experiments was larger than the predicted value, which was estimated by using the results obtained from the equivalent steady flow experiment. The peak bedload transport rate for unsteady flow conditions was also larger than the predicted value. The ratios of the measured to the predicted quantities mentioned above were found to be constant values for different shapes of hydrographs. It is, therefore, expected that the analytical results of sediment transport from equivalent steady flow can be a good reference for sediment transport under unsteady flow conditions. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

2.
Planimetric change was measured on daily hydrographs over two meltwater seasons using time-lapse images of the proglacial, gravel, braided, Sunwapta River, Canada. Significant planimetric change occurred on 10–15 days per year. Area of planimetric change correlated with peak and total daily meltwater hydrograph discharge. A clear threshold discharge can be identified below which no planform activity occurs, an intermediate range over which change occurs conditionally, and a peak flow range at which significant change always occurs. Field conditions were reproduced in a physical model in a laboratory flume. Photogrammetric DEMs of bed morphology and measurements of bedload output were made for each hydrograph experimental run. The physical model results for planimetric change had a threshold discharge for change, and trend with discharge, similar to the field data. The model data also show that planimetric change correlates strongly with volumes of erosion/deposition measured from successive DEMs, and with bedload transport rate. The relation between planimetric change and topographic change is also apparent from previous cross-section surveys at the field site. The results highlight the planimetric dynamics of braiding rivers in relation to discharge forcing, and the relationship between planimetric change, morphological change, and bedload transport in braided rivers. This also points to the potential use of measurements of planimetric change from time-lapse imagery as a low-cost method for high-frequency monitoring for braiding dynamics and also a surrogate for bedload transport measurement. © 2018 John Wiley & Sons, Ltd.  相似文献   

3.
《国际泥沙研究》2016,(3):271-278
In order to assess the dynamics of rivers, a reliable characterization of bedload transport particularly during unsteady flow regimes is required. In contrast to highly energetic cases in hillslope areas, we aim to answer the question whether the usage of acoustic measurements can improve the characterization of bedload in small rivers draining low land mountains with comparatively low water discharge and bedload. In addition to the investigation of natural flood events, controlled floods were generated by releasing water from a reservoir into a small gravel-bed stream. The controlled releases allow for an evaluation of bedload solely from channel storage or bank erosion. For acoustical in-situ characterization of bedload transport, hydrophones were mounted onto the bottom side of steel plates, thus recording the impacts of sediments via the acoustic vibrations on the surface of the plates while at the same time minimizing the disturbing noise resulting from water turbulence. Corresponding bedload traps are removable boxes with open lids fixed in the riverbed so that bedload material registered by the hydrophone is trapped. The acoustic signals correlate well with the quantity of the transported material. During summer flood events the highest transport rates occur at the beginning of the rising limb fea-turing clockwise hysteresis. This is due to the rising transport energy of the flow and the presence of loose, unconsolidated material. During typical winter flood events bedload shows anticlockwise loops. The intensification of bedload conveyance after the runoff peak can be explained by a decreasing stability of the bed material from the beginning to the end of a transport event. Anticlockwise behavior also results from a combination of bedload exhaustion in the vicinity of the monitoring station with a delayed arrival of new material from distal sources later in the hydrograph.  相似文献   

4.
Evolution of bed material mobility and bedload grain size distributions under a range of discharges is rarely observed in braiding gravel-bed rivers. Yet, the changing of bedload grain size distributions with discharge is expected to be different from laterally-stable, threshold, channels on which most gravel bedload theory and observation are based. Here, simultaneous observations of flow, bedload transport rate, and morphological change were made in a physical model of a gravel-bed braided river to document the evolution of grain size distributions and bed mobility over three experimental event hydrographs. Bedload transport rate and grain size distributions were measured from bedload samples collected in sediment baskets. Morphological change was mapped with high-resolution (~1 mm precision) digital elevation models generated from close-range digital photogrammetry. Bedload transport rates were extremely low below a discharge equivalent to ~50% of the channel-forming discharge (dimensionless stream power ~70). Fractional transport rates and plots of grain size distributions indicate that the bed experienced partial mobility at low discharge when the coarsest grains on the bed were immobile, weak selective mobility at higher discharge, and occasionally near-equal mobility at peak channel-forming discharge. The transition to selective mobility and increased bedload transport rates coincided with the lower threshold for morphological change measured by the morphological active depth and active width. Below this threshold discharge, active depths were of the order of D90 and active widths were narrow (< 3% of wetted width). Above this discharge, both increased so that at channel-forming discharge, the active depth had a local maximum of 9D90 while active width was up to 20% of wetted width. The modelled rivers approached equal mobility when rates of morphological change were greatest. Therefore, changes in the morphological active layer with discharge are directly connected to the conditions of bed mobility, and strongly correlated with bedload transport rate. © 2018 John Wiley & Sons, Ltd.  相似文献   

5.
Coarse bedload transport dynamics are investigated utilizing hydrodynamic and sediment transport data obtained in an extensively instrumented study reach located in Squaw Creek, Montana, USA. During 1991 and 1992, a number of discrete bedload transport events associated with the daily rise and fall in stream discharge were investigated. Data show that initiation of sediment transport was accompanied by a reduction in bed roughness and by changes in bulk hydraulic parameters. For larger discharges, coarser fractions of the bed material mobilized, and bedload transport rates and average hydraulic parameters stabilized. As discharge reduced, mobile coarse particles became less frequent and deposited fine particles were removed, resulting in an increase in bed roughness. These observations are attributed to the downstream translation of bar sediments during the passage of a hydrograph. Bedload pulses were aperiodic but spatially variable. Flow turbulence and velocity profile data obtained during low flows allowed comparison between average bed shear stress and apparent bed roughness estimates obtained using different approaches. © 1998 John Wiley & Sons, Ltd.  相似文献   

6.
Despite a growing interest in the sediment dynamics of dryland rivers, most research has been based on ephemeral streams in endogenic hydrological systems (runoff and sediment transport determined by local precipitation). Less attention, however, has been paid to allogenic and perennial dryland rivers. Here, we report a case study on the suspended sediment dynamics of the Tarim River, an allogenic and perennial river flowing in a very arid environment in China, based on mean daily discharge and mean daily suspended sediment concentration (SSC) over the last 5 decades (1960–2011). Results reveal that discharge and SSCs are predominantly low and have distributions with large positive skewness. The SSC–discharge relationships can be fairly well generalized by power functions, with quite large scatter at extreme (low and high) flow conditions. Marked temporal and spatial variations were observed in the effective discharge for sediment transport. The frequency of the effective discharge ranged from 0.5% to 2% (or an average flow duration of 2–7 days/year), implying that moderate to high flows play an important role in sediment transport. The sediment rating curves show strong hysteresis effects, with 3 types of hysteresis loops observed, clockwise (the most predominant), anticlockwise, and figure of eight. The high potential for bank collapse near the peak and falling limb of the flood hydrograph is the major cause of anticlockwise and figure‐of‐eight hysteresis loops.  相似文献   

7.
A comprehensive monitoring programme focusing on bedload transport behaviour was conducted at a large gravel‐bed river. Innovative monitoring strategies were developed during five years of preconstruction observations accompanying a restoration project. A bedload basket sampler was used to perform 55 cross‐sectional measurements, which cover the entire water discharge spectrum from a 200‐year flood event in 2013 to a rare low flow event. The monitoring activities provide essential knowledge regarding bedload transport processes in large rivers. We have identified the initiation of motion under low flow conditions and a decrease in the rate of bedload discharge with increasing water discharge around bankfull conditions. Bedload flux strongly increases again during high flood events when the entire inundation area is flooded. No bedload hysteresis was observed. The effective discharge for bedload transport was determined to be near mean flow conditions, which is therefore at a lower flow discharge than expected. A numerical sediment transport model was able to reproduce the measured sediment transport patterns. The unique dataset enables the characterisation of bedload transport patterns in a large and regulated gravel‐bed river, evaluation of modern river engineering measures on the Danube, and, as a pilot project has recently been under construction, is able to address ongoing river bed incision, unsatisfactory ecological conditions for the adjacent national park and insufficient water depths for inland navigation. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

8.
We report an empirical analysis of the hydrologic response of three small, highly impervious urban watersheds to pulse rainfall events, to assess how traditional stormwater management (SWM) alters urban hydrographs. The watersheds vary in SWM coverage from 3% to 61% and in impervious cover from 45% to 67%. By selecting a set of storm events that involved a single rainfall pulse with >96% of total precipitation delivered in 60 min, we reduced the effect of differences between storms on hydrograph response to isolate characteristic responses attributable to watershed properties. Watershed-average radar rainfall data were used to generate local storm hyetographs for each event in each watershed, thus compensating for the extreme spatial and temporal heterogeneity of short-duration, intense rainfall events. By normalizing discharge values to the discharge peak and centring each hydrograph on the time of peak we were able to visualize the envelope of hydrographs for each group and to generate representative composite hydrographs for comparison across the three watersheds. Despite dramatic differences in the fraction of watershed area draining to SWM features across these three headwater tributaries, we did not find strong evidence that SWM causes significant attenuation of the hydrograph peak. Hydrograph response for the three watersheds is remarkably uniform despite contrasts in SWM, impervious cover and spatial patterns of land cover type. The primary difference in hydrograph response is observed on the recession limb of the hydrograph, and that change appears to be associated with higher storm-total runoff in the watersheds with more area draining to SWM. Our findings contribute more evidence to the work of previous authors suggesting that SWM is less effective at attenuating urban hydrographs than is commonly assumed. Our findings also are consistent with previous work concluding that percent impervious cover may have greater influence on runoff volume than percent SWM coverage.  相似文献   

9.
It is widely recognized nowadays that there are at least two different phases of bedload sediment transport in gravel‐bed rivers. However, the transition between these phases is still poorly or subjectively defined, especially at bends in rivers, where cross‐stream sediment transport can strongly influence changes in the texture of the transported sediment. In this paper, we use piecewise models to identify objectively, at two points in the cross‐section of a river bend, the discharge at which the transition between bedload transport phases occurs. Piecewise models were applied to a new bedload data set collected during a wide range of discharges while analysing the associated changes in sediment texture. Results allowed the identification of two well‐differentiated phases of sediment transport (phase I and phase II), with a breakpoint located around bankfull discharge. Associated with each phase there was a change in bedload texture. In phase I there was non‐dominance in the transport of fine or coarse fractions at a particular sampling point; but in phase II bedload texture was strongly linked to the position of the sampling point across the channel. In this phase, fine particles tended to be transported to the inner bank, while coarse sizes were transferred throughout the middle parts of the channel. Moreover, bedload texture at the inner sampling point became bimodal while the transport of pebble‐sized particles was increasing in the central parts of the river channel. It is suggested that this general pattern may be related both to secondary currents, which transfer finer particles from the outer to the inner bank, and to the progressive dismantling of the riverbed surface layer. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

10.
Bedload transport is known to be a highly fluctuating temporal phenomenon, even under constant (mean) flow conditions, as a consequence of stochasticity, bedform migration, grain sorting, hysteresis, or sediment supply limitation. Because bedload transport formulas usually refer to a single mean transport value for a given flow condition, one can expect that prediction accuracy (when compared to measurements) will depend on the amplitude and duration of fluctuations, which in turn depend on the time scale used for observations. This paper aims to identify how the time scale considered can affect bedload prediction. This was done by testing 16 common bedload transport formulas with four data sets corresponding to different measurement period durations: (i) highly fluctuating (quasi‐)instantaneous field measurements; (ii) volumes accumulated at the event scale on two small alpine gravel‐bed rivers, potentially affected by seasonal fluctuations; (iii) volumes accumulated at the interannual scale in a meandering gravel bed river, thought to be weakly subject to fluctuations; (iv) time‐integrated flume measurements with nearly uniform sediments. The tests confirmed that the longer the measurement period, the better the precision of the formula's prediction interval. They also demonstrate several consequential limitations. Most threshold formulas are no longer valid when the flow condition is below two times the threshold condition for the largest elements' motion on the bed surface (considering D84). In such conditions, equations either predict zero transport, or largely overestimate the real transport, especially when D84 is high. There is a need for new sediment data collected with highly reliable techniques such as recording slot bedload samplers to further investigate this topic. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

11.
Sediment transport during flood events often reveals hysteretic patterns because flow discharge can peak before (counterclockwise hysteresis) or after (clockwise hysteresis) the peak of bedload. Hysteresis in sediment transport has been used in the literature to infer the degree of sediment availability. Counterclockwise and clockwise hysteresis have been in fact interpreted as limited and unlimited sediment supply conditions, respectively. Hysteresis has been mainly explored for the case of suspended sediment transport, but it was rarely reported for bedload transport in mountain streams. This work focuses on the temporal variability of bedload transport in an alpine catchment (Saldur basin, 18.6 km2, Italian Alps) where bedload transport was monitored by means of an acoustic pipe sensor which detects the acoustic vibrations induced by particles hitting a 0.5m‐long steel pipe. Runoff dynamics are dominated by snowmelt in late spring/early summer, mostly by glacier melt in late summer/early autumn, and by a combination of the snow and glacier melt in mid‐summer. The results indicate that hysteretic patterns during daily discharge fluctuations are predominantly clockwise during the snowmelt period, likely due to the ready availability of unpacked sediments within the channel or through bank erosion in the lower part of the basin. On the contrary, counterclockwise hysteresis tend to be more frequent during late glacier melting period, possibly due to the time lag needed for sediment provided by the glacial and peri‐glacial area to be transported to the monitoring section. However, intense rainfall events occurring during the glacier melt period generated predominantly clockwise hysteresis, thus indicating the activation of different sediment sources. These results indicate that runoff generation processes play a crucial role on sediment supply and temporal availability in mountain streams. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

12.
The morphological active width, defined as the lateral extent of bed material displacement over time, is a fundamental parameter in multi‐threaded gravel‐bed rivers, linking complex channel dynamics to bedload transport. Here, results are presented from five constant discharge experiments, and three event hydrographs, covering a range of flow strengths and channel configurations for which morphological change, bedload transport rates, and stream power were measured in a physical model. Changes in channel morphology were determined via differencing of photogrammetrically‐derived digital elevation models (DEMs) of the model surface generated at regular intervals over the course of ~115 h of experimental runs. Independent measures of total bedload output were made using downstream sediment baskets. Results indicate that the morphological active width increases with total and dimensionless stream power and is strongly and positively correlated with bulk change (total volume of bed material displaced over time) and active braiding intensity (ABI). Although there is considerable scatter due to the inherent variability in braided river morphodynamics, the active width is positively correlated with independent measurements of bedload transport rate. Active width, bulk change, and bedload transport rates were all negligible below a dimensionless stream power threshold value of ~ 0.09, above which all increase with flow strength. Therefore, the active width could be used as a general predictor of bulk change and bedload transport rates, which in turn could be approximated from total and dimensionless stream power or ABI in gravel‐bed braided rivers. Furthermore, results highlight the importance of the active width, rather than the morphological active depth, in predicting volumes of change and bedload transport rates. The results contribute to the larger goals of better understanding braided river morphodynamics, creating large high‐resolution datasets of channel change for model calibration and validation, and developing morphological methods for predicting bedload transport rates in braiding river systems. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

13.
In cockpit karst landscapes, fluxes from upland areas contribute large volumes of water to low-lying depressions and stream flow. Hydrograph hysteresis and similarity between monitoring sites is important for understanding the space–time variability of hydrologic responses across the “hillslope–depression–stream” continuum. In this study, the hysteretic feature of hydrographs was assessed by characterizing the loop-like relationships between responses at upstream sites relative to subsurface discharge at the outlet of a small karst catchment. A classification of hydrograph responses based on the multi-scale smoothing Kernel -derived distance classifies the hydrograph responses on the basis of similarities between hillslope and depression sites, and those at the catchment outlet. Results demonstrate that the temporal and spatial variability of hydrograph hysteresis and similarity between hillslope flow and outlet stream flow can be explained by the local heterogeneity of depression aquifer. Large depression storage deficits emerging in the highly heterogeneous aquifer produce strong hysteresis and multiple relationships of upstream hydrographs relative to the outlet subsurface discharge. In contrast, when depression storage deficits are filled during consecutive rainfall events, depression hydrographs at the high permeability sites are almost synchronous or exhibit a monotonous function with the hydrographs at the outlet. This reduced hydrograph hysteresis enhances preferential flow paths in fractured rocks and conduits that can accelerate the hillslope flow to the outlet. Therefore, classification of hydrograph similarities between any upstream sites and the catchment outlet can help to identify the dominant hydrological functions in the heterogeneous karst catchment.  相似文献   

14.
Large floods are often attributed to the melting of snow during a rain event. This study tested how climate variability, snowpack presence, and basin physiography were related to storm hydrograph shape in three small (<1 km2) basins with old‐growth forest in western Oregon. Relationships between hydrograph characteristics and precipitation were tested for approximately 800 storms over a nearly 30‐year period. Analyses controlled for (1) snowpack presence/absence, (2) antecedent soil moisture, and (3) hillslope length and gradient. For small storms (<150 mm precipitation), controlling for precipitation, the presence of a snowpack on near‐saturated soil increased the threshold of precipitation before hydrograph rise, extended the start lag, centroid lag, and duration of storm hydrographs, and increased the peak discharge. The presence of a snowpack on near‐saturated soil sped up and steepened storm hydrographs in a basin with short steep slopes, but delayed storm hydrographs in basins with longer or more gentle slopes. Hydrographs of the largest events, which were extreme regional rain and rain‐on‐snow floods, were not sensitive to landform characteristics or snowpack presence/absence. Although the presence of a snowpack did not increase peak discharge in small, forested basins during large storms, it had contrasting effects on storm timing in small basins, potentially synchronizing small basin contributions to the larger basin hydrograph during large rain‐on‐snow events. By altering the relative timing of hydrographs, snowpack melting could produce extreme floods from precipitation events whose size is not extreme. Further work is needed to examine effects of canopy openings, snowpack, and climate warming on extreme rain‐on‐snow floods at the large basin scale. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

15.
Climatically driven changes in streamflow and hillslope sediment supply could potentially alter stream surface grain size distribution patterns and thereby impact habitat for a number of threatened and endangered in‐stream fish species. Relatively little is known about hydrograph (shape, peak flow) influence or the relative importance of chronic and episodic hillslope inputs on channel conditions. To better understand these external drivers, we calculated sediment routing through a gravel‐bedded river network using a one‐dimensional (1D) bedload transport model. We calculated changes in grain sizes and estimated Chinook salmon habitat suitability caused by a dry year and an extreme flood hydrograph, and chronic (diffusive, overland flow) or pulse (landslide, debris flow) hillslope sediment supplies. To obtain accurate channel conditions, a relatively high reference Shields stress, representative of steep mountain streams, was needed. An extreme event flood without any hillslope sediment inputs caused widespread bed coarsening and a decrease in aquatic habitat. Chronic sediment input combined with this hydrograph eliminated any changes in grain size and habitat, although when combined with a dry year flow, caused systematic bed fining. The influence of a given hydrograph therefore highly depends on the hillslope sediment supply. Regardless of the flow hydrograph or sediment pulse timing, grain size distribution or location, pulse sediment inputs did not cause widespread grain size changes despite being 100 times the total chronic input volume. Widespread and continuous hillslope sediment inputs may influence channel grain sizes and aquatic habitat more than a single discrete sediment pulse. Depending on the magnitudes of flow hydrograph and sediment supply alterations, climate change may induce no differences in grain sizes or very dramatic changes with significant consequences for long‐term sustainability. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

16.
The Lake Tahoe basin is experiencing an environmental decline that is partly due to sediment intakes from its tributaries. Many studies have estimated suspended sediment loads in these streams with a discrete sampling programme by collecting water samples and using a rating technique. However, the relationship between stream discharge and suspended sediment concentration (SSC) in these tributaries is known to differ during the rising and falling limbs of the snowmelt‐dominated hydrograph. Because of this hysteresis effect, sediment rating curves are poor predictors of suspended sediment dynamics in the stream. In this study, suspended sediment transport was investigated using a turbidity meter to provide a continuous record of sediment concentration during the snowmelt period. Hysteresis in suspended sediment transport was also investigated and is quantified with an H index, which is the ratio of the areas under the curve at different stages of the hydrograph. The temporal lag between the peak of SSC and the peak of stream discharge was quantified using cross‐correlation analysis. For almost all events, SSCs were higher during the rising limb of the hydrograph for a given discharge, with SSC peaks occurring before discharge peaks, resulting in clockwise hysteresis (H > 1). The H indices increased (looser hysteresis loop) as the availability of sediments increased and as the lag between peaks in SSC and discharge was larger. A restriction of the proposed H index was that it could only be computed when stream discharge increased by more than 30% during a melt event. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

17.
We monitor bedload transport and water discharge at six stations in two forested headwater streams of the Columbia Mountains, Canada. The nested monitoring network is designed to examine the effects of channel bed texture, and the influence of alluvial (i.e. step pools and riffle pools) and semialluvial morphologies (i.e. boulder cascades and forced step pools) on bedload entrainment and transport. Results indicate that dynamics of bedload entrainment are influenced by differences in flow resistance attributable to morphology. Scaled fractional analysis shows that in reaches with high form resistance most bedload transport occurs in partial mobility fashion relative to the available bed material, while calibers finer than 16 mm attain full mobility during bankfull flows. Equal mobility transport for a wider range of grain sizes is achieved in reaches exhibiting reduced form resistance. Our findings confirm that the Shields value for mobilization of the median surface grain size depends on channel gradient and relative submergence; however, we also find that these relations vary considerably for cobble and gravel bed channels due to proportionality between dimensionless shear stress and grain size. Exponents of bedload rating curves across sites correlate most with the D90s of the mobile bed, however, where grain effects are controlled (i.e. along individual streams), differences in form resistance across morphologies exert a primary control on bedload transport dynamics. Application of empirical formulae developed for use in steep alpine channels present variable success in predicting transport rates in forested snowmelt streams. Formulae that explicitly account for reductions in mobile bed area and high morphological resistance associated with woody debris provide the best approximation to observed empirical data. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

18.
Field data are essential in evaluating the adequacy of predictive equations for sediment transport. Each dataset based on the sediment transport rates and other relevant information gives an increased understanding and improved quantification of different factors influencing the sediment transport regime in the specific environment. Data collected for 33 sites on 31 mountain streams and rivers in Central Idaho have enabled the analysis of sediment transport characteristics in streams and rivers with different geological, topographic, morphological, hydrological, hydraulic, and sedimentological characteristics. All of these streams and rivers have armored, poorly sorted bed material with the median particle size of surface layer coarser than the subsurface layer. The fact that the largest particles in the bedload samples did not exceed the median particle size of the bed surface material indicates that the armor layer is stable for the observed flow discharges (generally bankfull or less, and in some cases two times higher than bankfull discharge). The bedload transport is size‐selective. The transport rates are generally low, since sediment supply is less than the ability of flow to move the sediment for one range of flow discharges, or, the hydraulic ability of the stream is insufficient for entrainment of the coarse bed material. Detailed analyses of bedload transport rates, bedload and bed material characteristics were performed for each site. The obtained results and conclusions are used to identify different influences on bedload transport rates in analyzed gravel‐bed rivers. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

19.
  相似文献   

20.
Development of design flood hydrographs using probability density functions   总被引：1，自引：0，他引：1  
Probability density functions (PDFs) are used to fit the shape of hydrographs and have been popularly used for the development of synthetic unit hydrographs by many hydrologists. Nevertheless, modelling the shapes of continuous stream flow hydrographs, which are probabilistic in nature, is rare. In the present study, a novel approach was followed to model the shape of stream flow hydrographs using PDF and subsequently to develop design flood hydrographs for various return periods. Four continuous PDFs, namely, two parameter Beta, Weibull, Gamma and Lognormal, were employed to fit the shape of the hydrographs of 22 years at a site of Brahmani River in eastern India. The shapes of the observed and PDF fitted hydrographs were compared and root mean square errors, error of peak discharge (EQP) and error of time to peak (ETP) were computed. The best‐fitted shape and scale parameters of all PDFs were subjected to frequency analysis and the quartiles corresponding to 20‐, 50‐, 100‐ and 200‐year were estimated. The estimated parameters of each return period were used to develop the flood hydrographs for 20‐, 50‐, 100‐ and 200‐year return periods. The peak discharges of the developed design flood hydrographs were compared with the design discharges estimated from the frequency analysis of 22 years of annual peak discharges at that site. Lognormal‐produced peak discharge was very close to the estimated design discharge in case of 20‐year flood hydrograph. On the other hand, peak discharge obtained using the Weibull PDF had close agreement with the estimated design discharge obtained from frequency analysis in case of 50‐, 100‐ and 200‐year return periods. The ranking of the PDFs based on estimation of peak of design flood hydrograph for 50‐, 100‐ and 200‐year return periods was found to have the following order: Weibull > Beta > Lognormal > Gamma. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号