共查询到20条相似文献，搜索用时 31 毫秒
1.
The erosion of composite river banks is a complex process involving a number of factors including fluvial erosion, seepage erosion, and cantilever mass failure. To predict the rate of bank erosion with these complexities, a stochastic bank erosion model is suitable to define the probability distribution of the controlling variables. In this study, a bank erosion model in a river bend is developed by coupling several bank erosion processes with an existing hydrodynamic and morphological model. The soil erodibility of cohesive bank layers was measured using a submerged jet test apparatus. Seasonal bank erosion rates for four consecutive years at a bend in the Brahmaputra River, India, were measured by repeated bankline surveys. The ability of the model to predict erosion was evaluated in the river bend that displayed active bank erosion. In this study, different monsoon conditions and the distribution functions of two variables were considered in estimating the stochastic bank erosion rate: the probability of the soil erodibility and stochastic stage hydrographs for the nth return period river stage. Additionally, the influences of the deflection angle of the streamflow, longitudinal slope of river channel, and bed material size on bank erosion rate were also investigated. The obtained stochastic erosion predictions were compared with the observed distribution of the annual‐average bank erosion rate of 45 river bends in the Brahmaputra River. The developed model appropriately predicted the short‐term morphological dynamics of sand‐bed river bends with composite banks. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
2.
Recent studies of river bank erosion in three catchments in the UK have been characterized by the persistent occurrence of negative erosion‐pin results. The cause of these negative recordings is considered with reference to field data from the Afon Trannon, Nant Tanllwyth and River Arrow, and to a laboratory study of freeze–thaw and desiccation processes. It seems that there is potential for, and in some cases evidence of, a number of different circumstances that generate negative results, but none of these alone is sufficient to explain all incidents. Factors considered include: deposition of sediment during high flows; soil fall from the upper parts of the bank on to lower erosion pins; loosening of the soil surface and expansion/contraction of the soil mass with fluctuations in temperature and moisture content; movement of the erosion‐pin within the bank and human interference. Each has its own implications for the use of erosion pins. Further issues arise when including negative data in subsequent data analysis, and it is demonstrated that attempts to correlate erosion rates with hydro‐meteorological data in order to ascertain causes of erosion will be influenced by the way in which negative data are handled. It is thus suggested that any study of river bank erosion using erosion pins should state whether or not negative data were obtained, and if so, how they were included in data analysis. Failure to include this information could lead to comparison of mean erosion rates that reflect bank processes very differently. The studies presented here offer a clear example of the value of ‘anomalous’ field data: results which do not appear to fit expected patterns can reveal as much about the processes in operation as those that do. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
3.
The headwaters of many rivers are characterized by gullies and incised streams that generate significant volumes of sediment and degrade downstream water quality. These systems are characterized by harsh climates, ephemeral flows that do not reach bank top, and bare cohesive banks of clay and weathered bedrock. We investigated the rates and processes of bank erosion in an incised canal that has such characteristics. Detailed measurements of bank position were made over two years with a purpose‐built groundprofiler and photo‐electronic erosion pins (PEEPs). Stage height and turbidity were also monitored. The bare banks eroded at 13 ± 2 mm a−1. Erosion is controlled by subaerial processes that loosen bank material. Observations show that needle‐ice growth is important in winter and desiccation of clays predominates in summer. Flows are unable to erode firm cohesive clays from the banks, and erosion is generally limited by the availability of loosened material. This produces strong hysteresis in turbidity during events. Peak turbidity is related to the number of days with low flow between events, and not peak stage. Rehabilitation with a moderate cover of grass is able to prevent bank erosion by limiting the subaerial erosion processes. Projections of current erosion suggest that without vegetation cover the banks are unlikely to stabilize for many years. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
4.
Between a.d. 2006 and 2008, we completed annual surveys of two mercury‐contaminated eroding banks, one forested and the other grass covered, along the gravel‐bed, bedrock South River in Virginia. Gridded digital terrain models with a resolution of 0·05 m were created from bank topography data collected using a terrestrial laser scanner. Model comparisons indicate that the forested bank retreated nearly 1 m around two leaning trees, while elsewhere the extent of bank retreat was negligible. On the grassy bank, retreat was controlled by the creation of small overhanging clumps of turf at the top of the bank, their occasional failure, and the ultimate removal of failed debris from the bank toe. Partial autocorrelation analysis of vertically integrated bank retreat demonstrates that bank profile erosion is virtually uncorrelated at horizontal distances greater than about 1 m on both banks, a length scale of approximately half the bank height. This extensive streamwise variability suggests that widely spaced profile data cannot adequately represent bank erosion at these sites. Additional analysis of our comprehensive spatial data also indicates that traditional bank profile surveys with any spacing greater than 1 m would result in measurement errors exceeding 10%, an important conclusion for assessing annual rates of mercury loading into the South River from bank erosion. Our results suggest that three‐dimensional gridded bare‐earth models of bank topography may be required to accurately measure annual bank retreat in similar river systems. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
5.
Rebecca Bartley Rex J. Keen Aaron A. Hawdon Peter B. Hairsine Mark G. Disher A. E. Kinsey‐Henderson 《地球表面变化过程与地形》2008,33(14):2174-2200
Catchment sediment budget models are used to predict the location and rates of bank erosion in tropical catchments draining to the Great Barrier Reef lagoon, yet the reliability of these predictions has not been tested due to a lack of measured bank erosion data. This paper presents the results of a 3 year field study examining bank erosion and channel change on the Daintree River, Australia. Three different methods were employed: (1) erosion pins were used to assess the influence of riparian vegetation on bank erosion, (2) bench‐marked cross‐sections were used to evaluate annual changes in channel width and (3) historical aerial photos were used to place the short term data into a longer temporal perspective of channel change (1972–2000). The erosion pin data suggest that the mean erosion rate of banks with riparian vegetation is 6·5 times (or 85%) lower than that of banks without riparian vegetation. The changes measured from cross‐section surveys suggest that channel width has increased by an average of 0·74 (±0·47) m a?1 over the study period (or ～0·8% yr?1). The aerial photo results suggest that over the last 30 years the Daintree River has undergone channel contraction of the order of 0·25 m a?1. The cross‐section data were compared against modelled SedNet bank erosion rates, and it was found that the model underestimated bank erosion and was unable to represent the variable erosion and accretion processes that were observed in the field data. The reach averaged bank erosion rates were improved by the inclusion of locally derived bed slope and discharge estimates; however, the results suggest that it will be difficult for catchment scale sediment budget models to ever accurately predict the location and rate of bank erosion due to the variation in bank erosion rates in both space and time. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
6.
Gonzalo Duró Alessandra Crosato Maarten G. Kleinhans Timotheus G. Winkels Hessel A.G. Woolderink Wim S.J. Uijttewaal 《地球表面变化过程与地形》2020,45(2):361-374
Distinct bankline patterns appeared after the removal of protection works along a navigable reach of the Meuse River. A series of oblique embayments now dominate the riverine landscape after ten years of bank erosion, but their location and asymmetry cannot be explained yet. This work analyses and integrates field measurements of flow, ship waves, bank composition, bed topography and historical maps to explain the observed patterns along two reaches of the river. An extraordinary low-water-level event generated by a ship accident provided the unique opportunity to also analyse the subaqueous bank topography. The results indicate that the formation of oblique embayments arises from the combination of floodplain heterogeneity, structured by scroll-bar deposits, and the regulation of water levels, resulting in ship-wave attack at a narrow range of bank elevation for 70% of the time. Substrate erodibility acts on the effectiveness of trees to slow down local bank erosion rates, which is possibly enhanced by a positive feedback between woody roots and cohesive soil. The strong regulation of water levels and the waves generated by the intense ship traffic produce an increasingly long mildly-sloping terrace at the bank toe and progressively dominate the bank erosion process. This study demonstrates the important role of floodplain and scroll bar formation in shaping later bank erosion, which has implications for predictive numerical models, restoration strategies, and understanding the role of vegetation in bank erosion processes. © 2019 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd 相似文献
7.
Tim Stott 《地球表面变化过程与地形》1997,22(4):383-399
Stream bank erosion rates measured over a two-year period on a moorland and a forested stream in the Institute of Hydrology's Balquhidder Paired Catchments in central Scotland were compared. Bank erosion rates are generally higher on the mainstream of the moorland catchment and highest in wintger on both streams. Bank erosion is correlated with the incidence of frost: minimum temperatures measured on stream banks of the forested stream were an average of 3·7°C higher than on stream banks both outside the forest and on the moorland stream. This makes the incidence of frost on forested stream banks half as frequent. Volumes of material eroded from the mainstreams were combined with bulk density measurements and it is estimated that erosion of the mainstream banks is contributing 1·5 and 7·3 per cent of the sediment yield of the forested and moorland catchments, respectively. Analysis of the vertical distribution of erosion on the banks of both streams suggests an undercutting mechanism which is more pronounced in the moorland stream. The influence of trees on bank erosion and possible implications for the management of forest streams are discussed. © 1997 by John Wiley & Sons, Ltd. 相似文献
8.
Modification of the land use of a small catchment through coniferous afforestation is shown to have influenced stream bank erosion and channel form. Field mapping and erosion pin measurements over a 19-month period provides evidence of more active bank erosion along forested channel reaches than along non-forested. Extrapolation of downstream increases in bankfull width, bankfull depth, and channel capacity with increasing basin area for the non-forested catchment has demonstrated that afforestation of the lower part of the catchment has had a marked effect on channel form. Channel widths within the forest are up to three times greater than that predicted from the regression. These changes in bankfull width have led to stream bed aggradation and the development of wide shallow channels within the forest, and channel capacities within the forest are over two times that predicted from the basin area. The relationship between channel sinuosity and valley gradient for non-forested reaches of the river also indicated decreased sinuosity resulting from afforestation. These changes in channel form result from active bank erosion within the forest with coarse material being deposited within the channel as point-bars and mid-channel bars. Active bank erosion is largely attributed to the suppression by the forest of a thick grass turf and its associated dense network of fine roots, and secondly to the river attempting to bypass log jams and debris dams in the stream channel. 相似文献
9.
River banks are important sources of sediment and phosphorus to fluvial systems, and the erosion processes operating on the banks are complex and change over time. This study explores the magnitude of bank erosion on a cohesive streambank within a small channelized stream and studies the various types of erosion processes taking place. Repeat field surveys of erosion pin plots were carried out during a 4‐year period and observations were supplemented by continuous monitoring of volumetric soil water content, soil temperature, ground water level and exposure of a PEEP sensor. Bank erosion rates (17·6–30·1 mm year?1) and total P content on the banks were relatively high, which makes the bank an important source of sediment and phosphorus to the stream, and it was estimated that 0·27 kg Ptot year?1 ha?1 may potentially be supplied to the stream from the banks. Yearly pin erosion rates exceeding 5 cm year?1 were mainly found at the lower parts of the bank and were associated with fluvial erosion. Negative erosion pin readings were widespread with a net advance of the bank during the monitoring period mainly attributed to subaerial processes and bank failure. It was found that dry periods characterized by low soil water content and freeze–thaw cycles during winter triggered bank failures. The great spatial variability, in combination with the temporal interaction of processes operating at different scales, requires new tools such as 3‐D topographical surveying to better capture bank erosion rates. An understanding of the processes governing bank erosion is required for riparian management using vegetational measures as root size and structure play different roles when it comes to controlling bank erosion processes. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
10.
Storage of large woody debris in the wide, mountain, Czarny Dunajec River, southern Poland, was investigated following two floods of June and July 2001 with a seven‐year frequency. Within a reach, to which wood was delivered only by bank erosion and transport from upstream, wood quantities were estimated for eighty‐nine, 100 m long, channel segments grouped into nine sections of similar morphology. Results from regression analysis indicated the quantity of stored wood to be directly related to the length of eroded, wooded banks and river width, and inversely related to unit stream power at the flood peak. The largest quantities of wood (up to 33 t ha?1) were stored in wide, multi‐thread river sections. Here, the relatively low transporting ability of the river facilitated deposition of transported wood while a considerable length of eroded channel and island banks resulted in a large number of trees delivered from the local riparian forest. In these sections, a few morphological and ecological situations led to the accumulation of especially large quantities of wood within a small river area. Very low amounts of wood were stored in narrow, single‐thread sections of regulated or bedrock channel. High stream power facilitated transport of wood through these sections while the high strength of the banks and low channel sinuosity prevented bank retreat and delivery of trees to the channel. Considerable differences in the character of deposited wood existed between wide, multi‐thread channel sections located at different distances below a narrow, 7 km long, channellized reach of the river. Wood deposited close to the downstream end of the channellized reach was highly disintegrated and structured into jams, whereas further downstream well preserved shrubs and trees prevailed. This apparently reflects differences in the distance of wood transport and shows that in a mountain river wider than the height of trees growing on its banks, wood can be transported long distances along relatively narrow, single‐thread reaches but is preferentially deposited in wide, multi‐thread reaches. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
11.
《国际泥沙研究》2016,(3):220-225
The cantilever failure is one of the typical bank failures, in which the lateral caving erosion at the bottom of the bank plays an important role. When the caving erosion width is larger than a certain value, the cantilever failures such as shear, toppling and stress failures may occur. In order to understand the condition of the cantilever failure, the collapse mechanisms of the cantilever failures are studied based on the bank stability theory and flume experiment. According to the bank stability equation with the lateral erosion, the critical caving erosion width (CCEW) formulas for the shear and toppling failures of simple slope bank were derived in this paper. The formulas show that the CCEW increases as the overhanging soil thickness and soil cohesion increase, and decreases as the crack depth on the bank surface and the slope angle of the bank increase. And these formulas were tested with experimental data, which shows the predicted values are good agreement with experimental data. The paper reveals a quantitative expression on the process of the river cantilever failure. 相似文献
12.
Jim Pizzuto 《地球表面变化过程与地形》2009,34(9):1234-1244
The highly stochastic nature of riverbank erosion has driven the need for spatially explicit empirical models. Detailed bank profile surveys along a meander bend of the Brandywine Creek in Pennsylvania, USA, before and after 28 high flow events over a 2·5 year period are used to develop an empirical model of cohesive bank profile erosion. Two hundred and thirty‐six bank erosion observations are classified as hydraulic erosion or subaerial erosion. Threshold conditions required to initiate bank erosion cannot be defined based on field measurements. Using the near‐bank velocity and the number of freeze–thaw cycles as predictors, regression equations are derived for hydraulic erosion that specify the length, thickness, and location on the bank face of eroded blocks. An empirical discriminant function defines the critical geometry of overhang failures, and the volumes removed by overhang failures are computed using another regression equation. All the regression equations are significant, but have low correlation coefficients, suggesting that cohesive bank erosion has a strong stochastic component. Individual events typically remove small masses of soil (average volume 0·084 m3/m) a few centimeters thick (median = 0·057 m) and a few decimeters in length (median = 0·50 m) from the lower third of the bank. Hydraulic erosion is responsible for 87% of all erosion. When applied to three survey sites not used in its development, the profile model predicts the total volume of erosion with errors of 23%, 5% and 1%. Twenty‐four percent of computed erosion volumes for single events are within 50% of observed volumes at these three sites. Extending the approach to decadal timescales and to entire bends will require three‐dimensional observations of bank failure, and spatially and temporally explicit methods to account for the influence of individual large trees on bank failures and near‐bank hydraulic processes. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
13.
Subaerial river bank erosion processes and their interaction with other bank erosion mechanisms on the River Arrow,Warwickshire, UK 总被引：1，自引：0，他引：1
River bank erosion occurs primarily through a combination of three mechanisms: mass failure, fluvial entrainment, and subaerial weakening and weathering. Subaerial processes are often viewed as ‘preparatory’ processes, weakening the bank face prior to fluvial erosion. Within a river basin downstream process ‘domains’ occur, with subaerial processes dominating the upper reaches, fluvial erosion the middle, and mass failure the lower reaches of a river. The aim of this paper is to demonstrate that (a) subaerial processes may be underestimated as an erosive agent, and (b) process dominance has a temporal, as well as spatial, aspect. Bank erosion on the River Arrow, Warwickshire, UK, was monitored for 16 months (December 1996 to March 1998) using erosion pins. Variations in the rate and aerial extent of erosion are considered with reference to meteorological data. Throughout the first 15 months all erosion recorded was subaerial, resulting in up to 181 mm a?1 of bank retreat, compared with 13 to 27 mm a?1 reported by previous researchers. While the role of subaerial processes as ‘preparatory’ is not contended, it is suggested that such processes can also be erosive. The three bank erosion mechanisms operate at different levels of magnitude and frequency, and the River Arrow data demonstrate this. Thus the concept of process dominance has a temporal, as well as spatial aspect, particularly over the short time‐periods often used for studying processes in the field. Perception of the relative efficacy of each erosive mechanism will therefore be influenced by the temporal scale at which the bank is considered. With the advent of global climate change, both these magnitude–frequency characteristics and the consequent interaction of bank erosion mechanisms may alter. It is therefore likely that recognition of this temporal aspect of process dominance will become increasingly important to studies of bank erosion processes. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
14.
Seepage erosion in layered stream bank material 总被引：1，自引：0，他引：1
Current stream restoration practices often require anthropogenic manipulation of natural field soils to reconstruct stream banks in the absence of stabilizing vegetation. For this study, researchers conducted laboratory experiments on reconstructed, non‐vegetated stream banks with layered soils experiencing seepage. The objective of the study was to determine the effect of seepage, pore water pressure, and bank geometry on erosion and bank stability of layered streambanks. The experimental design consisted of an intermediate‐size soil lysimeter packed with a sandy clay loam top soil and an underlying fine sand layer at three bank slopes (90°, 45° and 26°). Shallow groundwater flow and seepage resulted in bank failure of geometrically stable banks. Pop out failures, liquid deformation, and piping were all observed failure mechanisms in the underlying sand material, dependent on the bank angle. Groundwater seepage processes created small‐scale failures of the underlying sand leading to larger‐scale failures of the overlying sandy clay loam. The underlying sand layer eroded according to the initial bank angle and change in overburden loading. The overlying loam layer failed along linear failure planes. The gradually sloped bank (i.e. 26° slope) failed faster, hypothesized to be due to less confining pressure and greater vertical seepage forces. Researchers analyzed the laboratory experiments using the Bank Stability and Toe Erosion Model, version 4·1. The model calculated an accurate shear surface angle similar to the failure angle observed in the lysimeter tests. The model predicted failure only for the undercut 90° bank slope, and indicated stable conditions for the other geometries. Steeper initial bank slopes and undercut banks decreased the bank factor of safety. The observed failure mechanisms and measured saturation data indicated an interaction between overburden pressure, seepage forces, and bank slope on bank stability. Future bank stability modeling would benefit by incorporating lateral seepage erosion and soil liquefaction prediction calculations. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
15.
In periglacial regions, frozen river banks are affected by thermal and mechanical erosion. In Siberia, bank retreats of up to 40 m per year are observed. This thermal erosion occurs during a few weeks, at springtime, for high enough water temperatures and river discharges. Until now, models of thermal erosion have been based on the assumption of a constant thermal erosion rate. We have developed a more general model at variable rate, whose solution is calculated using the integral method. Results of this model are compared with experiments, carried out in a cold room. A hydraulic channel allows measurements of the thermal erosion rate of a ground ice sample subjected to a turbulent water flow. Once validated, the model is applied to the periglacial river study case. The model has contributed to better understanding of the roles of each parameter during the thermal erosion process. High water temperature, discharge and ice temperature produce major thermal erosion, whereas the ice content in the soil tends to slow down the thermal erosion process. The effects of water temperature are predominant. An acceleration phase characterized by an increase of the thermal erosion rate occurs at the beginning of the thermal erosion process. The duration of such an acceleration phase is systematically studied. A relatively long acceleration phase is related to a low ablation rate. During the flood season, when the water temperature is increased to 18 °C, this acceleration phase lasts only a few minutes. However, for data typical of periglacial rivers, when the water temperature is close to the melting point, the acceleration phase can last a few days. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
16.
David L. Dunkerley 《地球表面变化过程与地形》2008,33(2):226-243
Percolation of flood waters into the bed and banks of ephemeral streams provides one of the key mechanisms responsible for transmission loss. However, there are very few published estimates of the rates at which water can enter stream‐bank sediments, and little is known about the variation in bank permeability with elevation above the bed and the resulting effects on transmission loss in floods of different magnitudes. This paper presents the results of 69 field determinations of bank infiltrability made on Fowlers Creek, an ephemeral dry‐land stream located in arid western New South Wales, Australia. Fowlers Creek carries high concentrations of suspended sediments, which are deposited as mud drapes on the bed, banks and floodplain. Results demonstrate that infiltration rates are lowest at the base of the banks, and tend to increase steadily with elevation on the bank, even above the apparent upper limit of mud drapes. In parallel, the texture of the bank sediments (assessed from samples of the uppermost 10 cm) becomes coarser with elevation above the bed. This pattern is inferred to relate to the delivery of silts and clays into pore spaces in the bank sediments by percolating flood waters. The patterns of infiltration rate and sediment texture mapped in the field are reasoned to be the product of many clogging episodes in past flood events having different peak stages. The increase in infiltration rate and mean particle size up the banks reflects lower frequencies of submergence and clogging of the upper banks by large floods, and more frequent inundation and clogging of the lower banks by sub‐bank‐full flows. The stage‐related changes in bank permeability provide a mechanism that can drive variations in transmission loss among floods having different peak stages and hydrograph shapes. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
17.
Hydraulic properties of concentrated flow of a bank gully in the dry‐hot valley region of southwest China 
下载免费PDF全文
下载免费PDF全文 Zhengan Su Donghong Xiong Yifan Dong Baojun Zhang Su Zhang Xueyong Zheng Dan Yang Jianhui Zhang Jianrong Fan Haidong Fang 《地球表面变化过程与地形》2015,40(10):1351-1363
To quantify spatiotemporal variation in hydraulic properties of bank gully concentrated flow, a series of scour experiments were run under water discharge rates ranging from 30 to 120 l min?1. Concentrated flows were found to be turbulent and supercritical in the upstream catchment area and downstream gully beds. As discharge increased, values of the soil erosion rate, Reynolds number (Re), shear stress, stream power, and flow energy consumption (ΔE) increased while values of the Froude number (Fr) and the Darcy–Weisbach friction factor (resistance f ) did not. With the exception of gully headcut collapse under discharge rates of 60, 90, and 120 l min?1, a declining power function trend (P < 0.05) in the soil erosion rate developed in the upstream catchment area, headcuts, and downstream gully beds. However, increasing trends were observed in temporal variations of hydraulic properties for downstream gully beds and the upstream catchment area. Despite significant differences in temporal variation between the soil erosion rate and hydraulic property values, relative steady state conditions of the soil erosion rate and ΔE were attained following an initial period of adjustment in the upstream catchment area, headcuts, and downstream gully beds under different discharge rates. A logarithmic growth of flow energy consumption per unit soil loss (ΔEu) was observed in bank gullies and the upstream catchment area as the experiment progressed, further illustrating the actual reason behind the discrepancy in temporal variation between soil erosion rates and ΔE. Results demonstrate that ΔE can be used to estimate headcut erosion soil loss, but further quantitative studies are required to quantify coupling effects between hydraulic properties and vertical variation in soil mechanical properties on temporal variation for bank gully soil erosion rates. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
18.
19.
D. M. Lawler 《地球表面变化过程与地形》1992,17(5):455-463
Process inference in geomorphology is hindered by a lack of information on the true temporal distribution of contemporary erosional and depositional activity. To tackle this problem a low-cost, automatic monitoring system based on the photo-electronic erosion pin (PEEP) sensor has been developed. The PEEP is essentially an array of photosensitive cells enclosed within a transparent tube and connected by cable to a datalogger. When inserted into an eroding landform, subsequent retreat of the face exposes more photosensitive cells to light which increases PEEP voltage output. Deposition decreases sensor outputs. The logged signals thus reveal the magnitude, timing and frequency of erosion and deposition events with much greater precision than has hitherto been possible. Measurement principles, electronic and physical design, calibration, field installation, problems and prospects and pilot results from a river bank erosion site are discussed. The PEEP system appears to have great potential for disentangling competing hypotheses in geomorphological process studies, and in building and testing erosion and sediment transport models of high temporal resolution. 相似文献
20.
Recognizing the underlying mechanisms of bank storage and return flow is important for understanding streamflow hydrographs. Analytical models have been widely used to estimate the impacts of bank storage, but are often based on assumptions of conditions that are rarely found in the field, such as vertical river banks and saturated flow. Numerical simulations of bank storage and return flow in river-aquifer cross sections with vertical and sloping banks were undertaken using a fully-coupled, surface-subsurface flow model. Sloping river banks were found to increase the bank infiltration rates by 98% and storage volume by 40% for a bank slope of 3.4° from horizontal, and for a slope of 8.5°, delay bank return flow by more than four times compared with vertical river banks and saturated flow. The results suggested that conventional analytical approximations cannot adequately be used to quantify bank storage when bank slope is less than 60° from horizontal. Additionally, in the unconfined aquifers modeled, the analytical solutions did not accurately model bank storage and return flow even in rivers with vertical banks due to a violation of the dupuit assumption. Bank storage and return flow were also modeled for more realistic cross sections and river hydrograph from the Fitzroy River, Western Australia, to indicate the importance of accurately modeling sloping river banks at a field scale. Following a single wet season flood event of 12 m, results showed that it may take over 3.5 years for 50% of the bank storage volume to return to the river. 相似文献