首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Barium carbonate (BaCO3) was examined in a diamond anvil cell up to a pressure of 73 GPa using an in situ angle-dispersive X-ray diffraction technique. Three new phases of BaCO3 were observed at pressures >10 GPa. From 10 to 24 GPa, BaCO3-IV had a post-aragonite structure with space group Pmmn. There are two molecules in a single unit cell (Z = 2) of the orthorhombic phase, which is same as the high-pressure phases of CaCO3 and SrCO3. The isothermal bulk modulus of BaCO3-IV is K 0 = 84(4) GPa, with V 0 = 129.0(7) Å3 when K 0′ = 4. The c axis of the unit cell parameter is less compressible than the a and b axes. The relative change in volume that accompanies the transformation between BaCO3-III and BaCO3-IV is ～6%. BaCO3-V, which has an orthorhombic symmetry, was synthesized at 50 GPa. As the pressure increases, BaCO3-V is transformed into tetragonal BaCO3-VI. This transformation is likely to be second order, because the diffraction pattern of BaCO3-V is similar to that of BaCO3-VI, and some single peaks in BaCO3-VI become doublets in BaCO3-V. After decompression, the new high-pressure phases transform into BaCO3-II. Our findings resolve a dispute regarding the stable high-pressure phases of BaCO3.  相似文献   

2.
The compressibility of -Mns (alabandite) was determined by x-ray analysis using a Mao-Bell type diamond anvil cell. The zero pressure bulk modulus (K0) is 74±2 GPa with the pressure derivative of the bulk modulus (Ko) fixed at four. Allowing (Ko) to vary yielded a statistically better fit with K0 = 88±6 GPa and k0 = 2.2±0.6. Our data combined with the data of McCammon (1991) gave Ko = 73±1 GPa with ko fixed at four. A fit with ko allowed to vary yielded ko = 75±2 GPa and ko = 3.7±0.4. Alabandite transformed from the B1 structure (NaCl-type) to an unknown high-pressure phase at 26 GPa. The high-pressure phase has lower than hexagonal symmetry and it is stable to at least 46±4 GPa.Also affiliated with the James Franck Institute, University of Chicago  相似文献   

3.
The high-pressure behavior of -Fe2O3 has been studied under static compression up to 60 GPa, using a laser-heated diamond anvil cell. Synchrotron-based angular-dispersive X-ray diffraction shows that the sample remains in the corundum structure up to 50 GPa, but with the appearance of coexisting diffraction lines from a high-pressure phase at pressures above 45 GPa. A least-squares fit of low-pressure phase data to an Eulerian finite-strain equation of state yields linear incompressibilities of K a 0=749.5 (± 18.4) GPa and K c 0= 455.7 (± 21.4) GPa, differing by a factor of 1.6 along the two directions. The enhanced compressibility of the c axis may lead to breaking of vertex- or edge-sharing bonds between octahedra, inducing the high-pressure phase transformation at 50 GPa. Analysis of linear compressibilities suggests that the high-pressure phase above 50 GPa is of the Rh2O3 (II) structure. Continuous laser heating reveals a new structural phase transformation of -Fe2O3 at 22 GPa, to an orthorhombic structure with a=7.305(3) Å, b=7.850(3) Å, and c=12.877(14) Å, different from the Rh2O3 (II) structure.  相似文献   

4.
High-temperature and high-pressure experiments conducted in a diamond-anvil cell revealed phase transformations in the aragonite-type carbonates of strontianite (SrCO3), cerussite (PbCO3), and witherite (BaCO3) at pressures below 4 GPa and ～1000?°C. The powder X-ray diffraction patterns of these high-pressure phases can be reasonably indexed with the same type of orthorhombic cell having a space group of P2122 (17). By assuming 16 MCO3 (M=Sr, Ba or Pb) molecules in a unit cell, the transition from the aragonite form to a new phase was concomitant with a volume contraction of 4.23, 2.38, and 2.34% for SrCO3, PbCO3, and BaCO3, respectively. If the same phase transition were to occur in CaCO3, it has been estimated that the transition would accompany a 7% volume contraction.  相似文献   

5.
In situ high-pressure synchrotron X-ray diffraction and infrared absorption experiments for gibbsite were performed at room temperature up to 53 and 25 GPa, respectively. A phase transition was confirmed at about 2.5 GPa. The high-pressure phase is indexed as an orthorhombic structure, rather than a triclinic structure as reported in previous studies. The compressibility of gibbsite and its high-pressure polymorph were studied, and their bulk moduli K0 were determined to be 49 and 75 GPa, respectively with K0 as 4. The in situ high-pressure infrared absorption spectra revealed the gradual disordering of hydrogen substructure above 15 GPa in quasihydrostatic compression.  相似文献   

6.
We have measured the infrared spectrum of aragonite-structured PbCO3-cerussite to 41 GPa at 300 K in the diamond anvil cell. We observed a phase transition from an orthorhombic to a trigonal structure beginning at ~15 GPa, manifested by a splitting of the ν2-out-of-plane bending vibration and a broadening and dramatic decrease in amplitude of the ν1-symmetric stretching vibration of the carbonate group. While the locations of the ν1-symmetric stretching and ν4-in-plane bending bands are similar between the low- and high-pressure phases, their mode shifts and peak shapes change markedly near the transition. In particular, the ν1 symmetric stretch has an essentially zero pressure shift in the high pressure phase, and its dramatically enhanced peak width indicates that it may be symmetry forbidden. The decreased mode shifts of the carbonate vibrations after the phase transition suggest that the carbonate group is less compressible in the new structure. The spectral changes observed are consistent with a small, trigonal unit cell, with space group ${P\bar{3}{1c}}$ and two formula units, instead of a previously proposed orthorhombic cell with sixteen formula units. This structure is identical to that of the high-pressure phase of BaCO3, and likely CaCO3 as well. Our results thus indicate that the post-aragonite, high-pressure phase of divalent-cation carbonates may be a comparatively high-symmetry trigonal structure.  相似文献   

7.
The high-pressure (HP) behaviour of a natural orthorhombic and tetragonal edingtonite from Ice River, Canada, has been investigated using in situ single-crystal X-ray diffraction. The two isothermal equations of state up to 6.74(5) GPa were determined. V0, KT0 and K refined with a third-order Birch–Murnaghan equation of state (BM-EoS) are: V0 = 598.70(7) Å3, KT0 = 59(1) GPa and K=3.9(4) for orthorhombic edingtonite and V0 = 600.9(2) Å3, KT0 = 59(1) GPa and K=4.2(5) for tetragonal edingtonite. The experiments were conducted with nominally hydrous pressure penetrating transmitting medium. No overhydration effect was observed within the pressure range investigated. At high-pressures the main deformation mechanism is represented by cooperative rotation of the secondary building unit (SBU).Si/Al distribution slightly influences the elastic behaviour of the tetrahedral framework: the SBU bulk moduli are 125(8) GPa and 111(4) GPa for orthorhombic and tetragonal edingtonite, respectively. Extra-framework contents of both zeolites show an interesting behaviour under HP conditions: the split Ba2 site at P >2.85 GPa is completely empty; only the position Ba1 is occupied. Electronic Supplementary Material. Supplementary material to this paper (Observed and calculated structure factors) is available in electronic form at Electronic Supplementary Material Supplementary material is available in the online version of this article at  相似文献   

8.
At ambient conditions, witherite is the stable form of BaCO3 and has the aragonite structure with space group Pmcn. Above ~10 GPa, BaCO3 adopts a post-aragonite structure with space group Pmmn. High-pressure and high-temperature synchrotron X-ray diffraction experiments were used to study the stability and equation of state of post-aragonite BaCO3, which remained stable to the highest experimental P–T conditions of 150 GPa and 2,000 K. We obtained a bulk modulus K 0 = 88(2) GPa with $K'$  = 4.8(3) and V 0 = 128.1(5) Å3 using a third-order Birch-Murnaghan fit to the 300 K experimental data. We also carried out density functional theory (DFT) calculations of enthalpy (H) of two structures of BaCO3 relative to the enthalpy of the post-aragonite phase. In agreement with previous studies and the current experiments, the calculations show aragonite to post-aragonite phase transitions at ~8 GPa. We also tested a potential high-pressure post–post-aragonite structure (space group C222 1 ) featuring four-fold coordination of oxygen around carbon. In agreement with previous DFT studies, ΔH between the C222 1 structure and post-aragonite (Pmmn) decreases with pressure, but the Pmmn structure remains energetically favorable to pressures greater than 200 GPa. We conclude that post–post-aragonite phase transformations of carbonates do not follow systematic trends observed for post-aragonite transitions governed solely by the ionic radii of their metal cations.  相似文献   

9.
The effect of (Mg,Fe) substitution on the compression and pressure-induced amorphization of olivines has been investigated up to more than 50 GPa in a diamond anvil cell through energy-dispersive X-ray diffraction experiments with synchrotron radiation. For the four (Mg1–x , Fe x )2SiO4 olivines studied, the compressibility is the highest along the b axis and the smallest along the a axis. For compositions with x = 0, 0.17, 0.66, and 1, the slope of the volume-pressure curves shows a rapid decrease at pressures of around 42, 34, 20 and 10 GPa, respectively. Assuming K0 = 4, we obtained at lower pressures with a Birch-Murnaghan equation of state essentially the same room-pressure bulk modulus for all olivines, namely K 0 = 131 ± 6 GPa, in agreement with previous single-crystal compression and ultrasonic measurements. At higher pressures, the compression becomes nearly isotropic and the materials very stiff. These changes could precede partial transformation of olivines to a high-pressure polymorph related to the spinel structure. Only a small fraction of olivines seems to transform actually to this phase, however, because most of the material undergoes instead pressure-induced amorphization which take place at considerably higher pressures for Mg-than for Fe-rich olivines.  相似文献   

10.
New internally consistent interpretations of the phases represented by the high pressure phase shock wave data for an albite-rich rock, Jadeite, and nepheline in the system NaAlSiO4-SiO2, are obtained using the results of static high pressure investigations, and the recent discovery of the hollandite phase in a shocked meteorite. We conclude that nepheline transforms directly to the calcium ferrite structure, whereas albite transforms possibly to the hollandite structure. Shock Hugoniots for the other plagioclase and alkali feldspars also indicate that these transform to hollandite structures. The pressure-volume data at high pressure could alternatively represent the compression of an amorphous phase. Moreover, the shock Hugoniot data are expected to reflect the properties of the melt above shock stresses of 60–80 GPa. The third order Birch-Murnaghan equation of state parameters are: Kos=275±38 GPa and Kos=1.6±1.5 for the calcium ferrite type NaAlSiO4, Kos=186±33 GPA and Kos=2.6±1.7 for the albite-rich hollandite, Kos=236±45 GPa and Kos=2.3±2.0 for the orthoclase-rich hollandite, and Kos=190 to 210 GPa and Kos2.2 for the anorthite-rich hollandite.  相似文献   

11.
The stability and pressure–volume equation of state of iron–silicon alloys, Fe-8.7 wt% Si and Fe-17.8 wt% Si, have been investigated using diamond-anvil cell techniques up to 196 and 124 GPa, respectively. Angular–dispersive X-ray diffractions of iron–silicon alloys were measured at room temperature using monochromatic synchrotron radiation and an imaging plate (IP). A bcc–Fe-8.7 wt% Si transformed to hcp structure at around 1636 GPa. The high-pressure phase of Fe-8.7 wt% Si with hexagonal close-packed (hcp) structure was found to be stable up to 196 GPa and no phase transition of bcc–Fe-17.8 wt% Si was observed up to 124 GPa. The pressure–volume data were fitted to a third-order Birch–Murnaghan equation of state (BM EOS) with zero–pressure parameters: V0=22.2(8) Å3, K0=198(9) GPa, and K0=4.7(3) for hcp–Fe-8.7 wt% Si and V0=179.41(45) Å3, K0=207(15) GPa and K0=5.1(6) for Fe-17.8 wt% Si. The density and bulk sound velocity of hcp–Fe-8.7 wt% Si indicate that the inner core could contain 3–5 wt% Si.  相似文献   

12.
Natural witherite (Ba0.99Sr0.01CO3) has been studied by single-crystal X-ray diffraction in the diamond anvil cell at eight pressures up to 8 GPa. At ambient pressure, cell dimensions are a?=?5.3164(12) Å, b?=?8.8921(19) Å, c?=?6.4279(16) Å, and the structure was refined in space group Pmcn to R(F)?=?0.020 from 2972 intensity data. The unit cell and atom position parameters for the orthorhombic cell were refined at pressures of 1.2, 2.0, 2.9, 3.9, 4.6, 5.5, 6.2, and 7.0 GPa. The volume-pressure data are used to calculate equation of state parameters K T0?=?50.4(12) GPa and K′?=?1.9(4). At approximately 7.2 GPa, a first-order transformation to space group P3¯1c was observed. Cell dimensions of the high-pressure phase at 7.2 GPa are a?=?5.258(6) Å, c?=?5.64(1) Å. The high pressure structure was determined and refined to R(F)?=?0.06 using 83 intensity data, of which 15 were unique. This high-pressure phase appears to be more compressible than the orthorhombic phase with an estimated initial bulk modulus (K 7.2GPa) of 10 GPa.  相似文献   

13.
The high-pressure behaviour of millerite NiS up to 34.7 GPa was studied using single-crystal X-ray diffraction techniques. Under ambient pressure, 8.3, 19.2 and 26.8 GPa crystal-structure determinations were performed. No phase transition was observed and the fit of the Birch-Murnaghan equation of state gave a bulk modulus K=111(1) GPa and a pressure derivative K=5.0(1) at high pressure and room temperature. The high-temperature modification of NiS belongs to the NiAs type and has the smaller volume per formula unit. High-pressure–high-temperature X-ray diffraction studies on NiS powder indicate that the transition temperature is strongly dependent on pressure. Owing to the higher compressibility of millerite compared with that of the high-temperature phase, it is assumed that the NiAs-type is not the stable phase at high pressures.  相似文献   

14.
Phase-transformation-induced twins in pressureless-sintered lanthanum gallate (LaGaO3) ceramics have been analysed using the transmission electron microscopy (TEM). Twins are induced by solid state phase transformation upon cooling from the rhombohedral to orthorhombic (o, Pnma) symmetry at ∼145°C. Three types of transformation twins {101} o , {121} o , and {123} o were found in grains containing multiple domains that represent orientation variants. Three orthorhombic orientation variants were distinguished from the transformation domains converged into a triple junction. These twins are the reflection type as confirmed by tilting experiment in the microscope. Although not related by group–subgroup relation, the transformation twins generated by phase transition from rhombohedral to orthorhombic are consistent with those derived from taking cubic aristotype of the lowest common supergroup symmetry as an intermediate metastable structure. The r→ o phase transition of first order in nature may have occurred by a diffusionless, martensitic-type or discontinuous nucleation and growth mechanism.  相似文献   

15.
Brackets on the melting temperature of K2CO3 were experimentally determined at 1.86 ± 0.02 GPa (1,163–1,167°C), 2.79 ± 0.03 GPa (1,187–1,195°C), and 3.16 ± 0.04 GPa (1,183–1,189°C) in a piston-cylinder apparatus. These new data, in combination with published experiments at low pressure (<0.5 GPa), establish the K2CO3 fusion curve to 3.2 GPa. On the basis of these experiments and published thermodynamic data for crystalline and liquid K2CO3, the high-pressure density and compressibility of K2CO3 liquid were derived from the fusion curve. The pressure dependence of the liquid compressibility (K′0 = dK 0/dP, where K 0 = 1/β0) is between 16.2 and 11.6, with a best estimate of 13.7, in a third-order Birch–Murnaghan equation of state (EOS). This liquid K′0 leads to a density of 2,175 ± 36 kg/m3 at 4 GPa and 1,500°C, which is ∼30% lower than that reported in the literature on the basis of the falling-sphere method at the same conditions. The uncertainty in the liquid K′0 leads to an error in melt density of ± 2% at 4 GPa; the error decreases with decreasing pressure. With a K′0 of 13.7, the compressibility of K2CO3 at 1,500°C and 1 bar (K 0 = 3.8 GPa) drops rapidly with increasing pressure ( ), which prevents a density crossover with silicate melts, such as CaAlSi2O8 and CaMgSi2O6, at upper mantle depths.  相似文献   

16.
The comparative compressibility and high-pressure stability of a natural epidote (0.79 Fe-total per formula unit, Fetot pfu) and clinozoisite (0.40 Fetot pfu) were investigated by single-crystal X-ray diffraction and Raman spectroscopy. The lattice parameters of both phases exhibit continuous compression behavior up to 30 GPa without evidence of phase transformation. Pressure–volume data for both phases were fitted to a third-order Birch–Murnaghan equation of state with V 0 = 461.1(1) Å3, K 0 = 115(2) GPa, and \(K_{0}^{'}\) = 3.7(2) for epidote and V 0 = 457.8(1) Å3, K 0 = 142(3) GPa, and \(K_{0}^{'}\) = 5.2(4) for clinozoisite. In both epidote and clinozoisite, the b-axis is the stiffest direction, and the ratios of axial compressibility are 1.19:1.00:1.15 for epidote and 1.82:1.00:1.19 for clinozoisite. Whereas the compressibility of the a-axis is nearly the same for both phases, the b- and c-axes of the epidote are about 1.5 times more compressible than in clinozoisite, consistent with epidote having a lower bulk modulus. Raman spectra collected up to 40.4 GPa also show no indication of phase transformation and were used to obtain mode Grüneisen parameters (γ i) for Si–O vibrations, which were found to be 0.5–0.8, typical for hydrous silicate minerals. The average pressure coefficient of Raman frequency shifts for M–O modes in epidote, 2.61(6) cm?1/GPa, is larger than found for clinozoisite, 2.40(6) cm?1/GPa, mainly due to the different compressibility of FeO6 and AlO6 octahedra in M3 sites. Epidote and clinozoisite contain about 2 wt% H2O are thus potentially important carriers of water in subducted slabs.  相似文献   

17.
Neutron diffraction data suitable for Rietveld refinements were collected on a powder sample of synthetic Mg(OH)2 by the Polaris time-of-flight spectrometer (ISIS spallation source, U.K.) at 10-4 7.8(3) and 10.9(6) GPa. The Paris-Edinburgh high-pressure cell with WC anvils was used. Pressure calibration and equation-ofstate results were attained by separate runs with an NaCl internal standard. Interpolation of p(V) data by the fourth-order Birch-Murnaghan e.o.s. yields K 0=41(2) GPa, K0=4(2) and K0=1.1(9) GPa-1. The bulk modulus obtained is smaller than previously reported results. Rietveld refinements (R prof =1.45% and 2.02% at 10-4 and 10.9 GPa) show that H lies on the threefold axis (1/3, 2/3, z) up to 10.9 GPa, where a model with H disordered in (x, 2x, z) can be refined. In the latter case, a hydrogen bond with O-H=0.902(7), H..O=2.026(8) Å and <>=145.9 (7)° is observed. Differences with previous results for deuterated brucite are discussed. The onset of H disorder, and a jump of the c/a ratio vs. pressure at 6–7 GPa, may be related to a second-order phase transition consistent with recently reported Raman spectroscopic results.  相似文献   

18.
In situ high-pressure synchrotron X-ray diffraction and Raman spectroscopic studies of orthorhombic CaFe2O4-type β-CaCr2O4 chromite were carried out up to 16.2 and 32.0 GPa at room temperature using multi-anvil apparatus and diamond anvil cell, respectively. No phase transition was observed in this study. Fitting a third-order Birch–Murnaghan equation of state to the P–V data yields a zero-pressure volume of V 0 = 286.8(1) Å3, an isothermal bulk modulus of K 0 = 183(5) GPa and the first pressure derivative of isothermal bulk modulus K 0′ = 4.1(8). Analyses of axial compressibilities show anisotropic elasticity for β-CaCr2O4 since the a-axis is more compressible than the b- and c-axis. Based on the obtained and previous results, the compressibility of several CaFe2O4-type phases was compared. The high-pressure Raman spectra of β-CaCr2O4 were analyzed to determine the pressure dependences and mode Grüneisen parameters of Raman-active bands. The thermal Grüneisen parameter of β-CaCr2O4 is determined to be 0.93(2), which is smaller than those of CaFe2O4-type CaAl2O4 and MgAl2O4.  相似文献   

19.
We have calculated the compressional, vibrational, and thermodynamic properties of Ni3S2 heazlewoodite and the high-pressure orthorhombic phase (with Cmcm symmetry) using the generalized gradient approximation to the density functional theory in conjunction with the quasi-harmonic approximation. The predicted Raman frequencies of heazlewoodite are in good agreement with room-temperature measurements. The calculated thermodynamic properties of heazlewoodite at room conditions agree very well with experiments, but at high temperatures (especially above 500 K) the heat capacity data from experiments are significantly larger than the quasi-harmonic results, indicating that heazlewoodite is anharmonic. On the other hand, the obtained vibrational density of states of the orthorhombic phase at 20 GPa reveals a group of low-frequency vibrational modes which are absent in heazlewoodite. These low-frequency modes contribute substantially to thermal expansivity, heat capacity, entropy, and Grüneisen parameter of the orthorhombic phase. The calculated phase boundary between heazlewoodite and the orthorhombic phase is consistent with high-pressure experiments; the predicted transition pressure is 17.9 GPa at 300 K with a negative Clapeyron slope of −8.5 MPa/K.  相似文献   

20.
A new oxygen-deficient perovskite with the composition Ca(Fe0.4Si0.6)O2.8 has been synthesised at high-pressure and -temperature conditions relevant to the Earths transition zone using a multianvil apparatus. In contrast to pure CaSiO3 perovskite, this new phase is quenchable under ambient conditions. The diffraction pattern revealed strong intensities for pseudocubic reflections, but the true lattice is C-centred monoclinic with a=9.2486 Å, b=5.2596 Å, c=21.890 Å and =97.94°. This lattice is only slightly distorted from rhombohedral symmetry. Electron-diffraction and high-resolution TEM images show that a well-ordered ten-layer superstructure is developed along the monoclinic c* direction, which corresponds to the pseudocubic [111] direction. This unique type of superstructure likely consists of an oxygen-deficient double layer with tetrahedrally coordinated silicon, alternating with eight octahedral layers of perovskite structure, which are one half each occupied by silicon and iron as indicated by Mössbauer and Si K electron energy loss spectroscopy. The maximum iron solubility in CaSiO3 perovskite is determined at 16 GPa to be 4 at% on the silicon site and it increases significantly above 20 GPa. The phase relations have been analysed along the join CaSiO3–CaFeO2.5, which revealed that no further defect perovskites are stable. An analogous phase exists in the aluminous system, with Ca(Al0.4Si0.6)O2.8 stoichiometry and diffraction patterns similar to that of Ca(Fe0.4Si0.6)O2.8. In addition, we discovered another defect perovskite with Ca(Al0.5Si0.5)O2.75 stoichiometry and an eight-layer superstructure most likely consisting of a tetrahedral double layer alternating with six octahedral layers. The potential occurrence of all three defect perovskites in the Earths interior is discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号