共查询到20条相似文献，搜索用时 156 毫秒
1.
The Olinghouse fault zone is one of several NE—ENE-trending fault zones and lineaments, including the Midas Trench and the Carson—Carson Sink Lineament, which exhibit left-lateral transcurrent movement conjugate to the Walker Lane in western Nevada. The active portion of this fault zone extends for approximately 23 km, from 16 km east of Reno, Nevada, to the southern extent of Pyramid Lake. The fault can be traced for most of its length from its geomorphic expression in the hilly terrain, and it is hidden only where overlain by recent alluvial sediments. Numerous features characteristic of strike-slip faulting can be observed along the fault, including: scarps, vegetation lines, sidehill and shutter ridges, sag ponds, offset stream channels and stone stripes, enclosed rhombohedral and wedge-shaped depressions, and en-echelon fractures.A shear zone having a maximum observable width of 1.3 km is defined principally by Riedel shears and their symmetrical P-shears, with secondary definition by deformed conjugate Riedel shears. Several continuous horizontal shears, or principal displacement shears, occupy the axial portion of the shear zone. The existence of P-shears and principal displacement shears suggests evolution of movement along the fault zone analogous to the “Post-Peak” or “Pre-Residual Structure” stage.Historic activity (1869) has established the seismic potential of this zone. Maximum intensities and plots of the isoseismals indicate the 1869 Olinghouse earthquake had a magnitude of 6.7. Field study indicates the active length of the fault zone is at least 23 km and the maximum 1869 displacement was 3.65 m of left-slip. From maximum fault length and maximum fault displacement to earthquake magnitude relations, this corresponds to an earthquake of about magnitude 7. 相似文献
2.
This review of geological, seismological, geochronological and paleobotanical data is made to compare historic and geologic rates and styles of deformation of the Sierra Nevada and western Basin and Range Provinces. The main uplift of this region began about 17 m.y. ago, with slow uplift of the central Sierra Nevada summit region at rates estimated at about 0.012 mm/yr and of western Basin and Range Province at about 0.01 mm/yr. Many Mesozoic faults of the Foothills fault system were reactivated with normal slip in mid-Tertiary time and have continued to be active with slow slip rates. Sparse data indicate acceleration of rates of uplift and faulting during the Late Cenozoic. The Basin and Range faulting appears to have extended westward during this period with a reduction in width of the Sierra Nevada.The eastern boundary zone of the Sierra Nevada has an irregular en-echelon pattern of normal and right-oblique faults. The area between the Sierra Nevada and the Walker Lane is a complex zone of irregular patterns of hörst and graben blocks and conjugate normal-to right- and left-slip faults of NW and NE trend, respectively. The Walker Lane has at least five main strands near Walker Lake, with total right-slip separation estimated at 48 km. The NE-trending left-slip faults are much shorter than the Walker Lane fault zone and have maximum separations of no more than a few kilometers. Examples include the 1948 and 1966 fault zone northeast of Truckee, California, the Olinghouse fault (Part III) and possibly the almost 200-km-long Carson Lineament.Historic geologic evidence of faulting, seismologic evidence for focal mechanisms, geodetic measurements and strain measurements confirm continued regional uplift and tilting of the Sierra Nevada, with minor internal local faulting and deformation, smaller uplift of the western Basin and Range Province, conjugate focal mechanisms for faults of diverse orientations and types, and a NS to NE—SW compression axis (σ1) and an EW to NW—SE extension axis (σ3). 相似文献
3.
Nassima Atmaoui Nina Kukowski Bernhard Stöckhert Diethard König 《International Journal of Earth Sciences》2006,95(2):225-238
Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments. 相似文献
4.
Larry V. Benson 《Quaternary Research》1978,9(3):300-318
Samples of algal tufa, gastropods and calcite-cemented sand were collected from the Walker and Pyramid Lake areas of the Lahontan Basin, Nevada. X-ray diffraction petrographic and radiocarbon analyses show that massive forms of tufa such as the dendritic variety contain secondary carbon-bearing material and therefore yield unreliable radiocarbon dates. Dense coating of tufa (lithoid), however, gave radiocarbon ages in agreement with dates on coexisting aragonite gastropods. Radiocarbon data from the study were combined with previously dated noncarbonate materials [Born, S. M. (1972). “Lake Quaternary History, Deltaic Sedimentation, and Mudlump Formation at Pyramid Lake, Nevada”, Center for Water Resources, Desert Research Inst., Reno, Nevada] to give an internally consistent record of lake level fluctuations for the past 40,000 years. The main features of the Lahontan chronology are (1) extreme high stands (1330 m above sea level) 13,500 to 11,000 and 25,000 to 22,000 B.P., (2) a moderate high stand (1260 m above sea level) 20,000 to 15,000 B.P., (3) a low stand of unknown elevation 40,000 to 25,000 B.P., (4) an extremely low stand 9000 to 5000 B.P., and (5) an overall increase in the size of Walker and Pyramid Lakes during the past 5000 years, until the late 19th century. Pore fluid data indicate that Walker Lake desiccated sometime during the period 9050 to 6400 B.P. Salts deposited as a result of this dessication are still undergoing dissolution causing a flux of chloride, carbon, and other solute species from the sediments to the overlying lake water. Pore fluid data obtained from Pyramid Lake sediments do not indicate the presence of a concentrated brine at depth. This suggests that Pyramid Lake did not dry completely during this period although it may have been severely reduced in size. There has been considerable disagreement regarding the occurrence of extreme arid conditions (altithermal period) since 10,000 B.P. [Mehringer, P. J. (1977). “Models and Great Basin Prehistory”. Desert Research Inst. Pub, Reno, Nevada]. The data of this study suggest that such a climatic regime did occur in the western Great Basin during the period 9000 to 5000 B.P. 相似文献
5.
The Tertiary Mineoka ophiolite occurs in a fault zone at the intersection of the Honshu and Izu forearcs in central Japan and displays structural evidence for three major phases of deformation: normal and oblique-slip faults and hydrothermal veins formed during the seafloor spreading evolution of the ophiolite at a ridge-transform fault intersection. These structures may represent repeated changes in differential stress and pore-fluid pressures during their formation. The second series of deformation is characterized by oblique thrust faults with Riedel shears and no significant mineral veining, and is interpreted to have resulted from transpressional dextral faulting during the obduction of the ophiolite through oblique convergence and tectonic accretion. This deformation occurred at the NW corner of a TTT-type (trench–trench–trench) triple junction in the NW Pacific rim before the middle Miocene. The third series of deformation of the ophiolite is marked by contractional and oblique shear zones, Riedel shears, and thrust faults that crosscut and offset earlier structures, and that give the Mineoka fault zone its lenticular (phacoidal) fabric at all scales. This deformation phase was associated with the establishment and the southward migration of the TTT Boso triple junction and with the kinematics of oblique subduction and forearc sliver fault development. The composite Mineoka ophiolite hence displays rocks and structures that evolved during its complex geodynamic history involving seafloor spreading, tectonic accretion, and triple junction evolution in the NW Pacific Rim. 相似文献
6.
Hisashi Taniyama 《Engineering Geology》2011,(3):194
A distinct element method analysis is carried out to examine the development of shear bands in overburden soil subjected to a strike-slip fault. About 2.3 million spherical particles are used in the analysis and the results are compared with the shears observed at the Nojima earthquake fault during the 1995 Hyogoken Nanbu earthquake. En echelon shears and secondary shears which strike at lower angles to the basement fault – typical in strike-slip faults – are observed in the numerical analysis. Simple shear in the horizontal plane and drag due to the dependence of velocity on depth are confirmed to control the helicoidal shape of Riedel shears. Rotation of the compressional direction toward the fault strike as a result of slip along Riedel shears is also verified. It is found that the compressional direction is more horizontal within the area enclosed by Riedel shears than in outside areas and that these compressional directions produce secondary lower-angle shears that are less helicoidal. It is shown that the formation of column-like structures of particles and their subsequent buckling play significant micromechanical roles in three-dimensionally wrenched shears. The results of the numerical analysis, such as shear intervals and striking angles, show a resemblance to observational results at sites where sediment contains coarse grains and is subjected to strike slip with a small dip component, although they are not exactly the same as those observed at locations with similar overburden thicknesses. 相似文献
7.
The initiation and linkage of surface fractures above a buried strike-slip fault: An experimental approach 总被引：1，自引：0，他引：1
Surface fractures in the overburdened sedimentary rocks, formed above a deep-seated basement fault, often provide important
information about the kinematics of the underlying master fault. It has already been established that these surface fractures
dynamically evolve and link one another with progressive displacement on the master fault below. In the present study, two
different series of riedel-type experiments were carried out with clay analogue models under different boundary conditions
viz., (i) heterogeneous simple shear of the cover rocks above a buried strike slip fault (wrench system) and (ii) heterogeneous
simple shear with a component of shear-normal compression of the overburden package above a basement fault (transpressional
system), to observe the initiation and linkage of surface fractures with varying T′ (where T′ = thickness of the overburden normalized with respect to the width of the master fault). In the wrench system, Riedel (R)
shears were linked by principal displacement (Y) shears at early stages (shear strain of 0.8 to 1) in thin (2 < T′ < 18) models and finally (at a minimum shear strain of 1.4) gave rise to a through-going fault parallel to the basement fault
without development of any other fracture. Conjugate Riedel (R′) shears develop only within the thicker (T′ > 18) clay models at a minimum shear strain of 0.7. With increasing deformation (at a minimum shear strain of 1.2) two R′
shears were joined by an R shear and finally opened up to make a sigmoidal vein with an asymmetry antithetic to the major
fault-movement sense. Under transpression, the results were similar to that of heterogeneous simple shear for layers 2 < T′ < 15. In layers of intermediate thickness (15 < T′ < 25) early formed high angle R shears were cross cut by low angle R shears (at a minimum shear strain of 0.5 and shortening
of 0.028) and “Riedel-within-Riedel” shears were formed within thick (T′ > 25) models (at minimum shear strain of 0.7 and shortening of 0.1), with marked angularity of secondary fault zone with
the master fault at depth. 相似文献
8.
2001年11月14日昆仑山口西8.1级地震是近50年来在我国大陆发生的震级最大、地表破裂最长的地震事件.地震地表破裂带全长426km,宽数米至数百米,总体走向90°～110°,具有明显的破裂分段特征,自西向东由5条次级破裂段组成.各破裂段又由若干更次级左阶或右阶斜列的破裂组成,具有自相似的分形结构特征.地震破裂带以左旋走滑为主,倾滑量很小.宏观震中区位于库赛湖东北93.0°～93.5°E一带的昆仑山南麓断层谷地内.最大地表同震左旋水平位移6.4m,最大垂直位移为4m.地表水平位移沿地震破裂带走向出现6个峰值,各峰值之间存在相对独立的衰减序列,这表明此地震具有多点破裂特征. 相似文献
9.
里德尔剪切的组合型式与走滑盆地组合型式的相似性 总被引：1，自引：0，他引：1
走滑断裂体系中经常发育里德尔剪切的断裂组合,世界上不同构造背景下与走滑断裂相关的盆地(走滑盆地)也很多见。因此里德尔剪切是地质构造研究中的重要方面。我们从三个方面对里德尔剪切的节理构造组合及盆地组合进行了对比:(1)里德尔剪切构造组合与比例尺无关。里德尔剪切带的(转换)拉张区与沉积盆地的分布区是相似的;(2)断裂的最大位移区与断陷盆地的沉积中心是一致的,断陷盆地长轴平行于断裂走向;(3)物理模拟试验及数学模拟试验都证实了走滑盆地的演化。基于上述认识,我们通过厘米级岩芯标本的观察,结合已发表的盆地资料,提出了6类与里德尔剪切有关的构造组合及断陷盆地组合。(1)雁列状构造及盆地组合:许多盆地发育雁列状构造。同时,与里德尔剪切相关的雁列状盆地的宽度与主剪切断裂的剪切位移呈正相关。(2)帚状或马尾状构造及盆地组合:二者在形态上相似,所以归为一类。成因上,马尾状构造及盆地主要发育在走滑断裂的拉张端部,而帚状构造或盆地反映走滑断裂的旋扭作用,可以在走滑断裂影响区域的任何部位。(3)串珠状构造及盆地组合:该类型的盆地主要是指释压盆地的组合,拉分盆地也可以形成串珠状盆地。(4)S状或Z状构造或盆地组合:左行走滑形成Z状构造或盆地,而右行走划形成S状构造或盆地。(5)多字型构造及盆地组合:是拉分盆地的典型组合,可以过渡到串珠状盆地。(6)复杂的网状构造及盆地组合:通常是由于分布型简单剪切的作用结果。以上盆地组合类型包括大型盆地内次级单元(次级盆地或更次级盆地)的组合,但不包括多成因、多期活动的构造及盆地。 相似文献
10.
Clay-rich fault rocks have long been recognized to host distinctive fabric elements, and fault rock fabric is increasingly thought to play a fundamental role in fault mechanical behaviour in the brittle regime. Although the geometries of fabric elements in fault gouges have been described for almost a century, the genesis and evolution of these elements during shear, and their links to bulk mechanical properties, remain poorly understood. We characterize the development and evolution of fabric elements with increasing shear in a variety of clay-rich experimental gouges over shear strains of <1 to >20 and at normal stresses of 2–150 MPa in the double-direct shear configuration. In addition to SEM observations of experiment products at a variety of shear strains, we quantified clay fabric intensity and the degree of grain size reduction using X-ray Texture Goniometry (XTG) and particle size distribution (PSD) measurements. We also measured P- and S-wave velocities during shear to further probe the evolution of shear fabric and gouge properties. We find that clay fabric elements develop in a systematic manner regardless of the gouge material. Riedel shears in the R1 orientation and boundary-parallel shears are the dominant fabric elements. Riedel shears nucleate at layer margins and propagate into the layer shortly after reaching yield stress. Clay particles rotate into the P-orientation shortly after Riedels propagate through the layer. The Riedel shears are through-going, but are >10× thinner than similar zones observed in coarser granular materials. Our results suggest that the weakness of clay-rich fault gouge may be less a function of anisotropic crystal structure, as has been suggested previously, and more a consequence of very thin shear surfaces permitting deformation in clay-rich materials with minimal dilation or cataclasis. The very thin shear surfaces are a function of the fine grain size of the materials and possibly polymodal PSD's. 相似文献
11.
On the internal structure and mechanics of large strike-slip fault zones: field observations of the Carboneras fault in southeastern Spain 总被引：1，自引：0，他引：1
Deciphering the internal structure of large fault zones is fundamental if a proper understanding is to be gained of their mechanical, hydrological and seismological properties. To this end, new detailed mapping and microstructural observations of the excellently exposed Carboneras fault zone in southeastern Spain have been used to elucidate both the internal arrangement of fault products and their likely mechanical properties. The fault is a 40 km offset strike-slip fault, which constitutes part of the Africa–Iberia plate boundary. The zone of faulting is 1 km in width not including the associated damage zone surrounding the fault. It is composed of continuous strands of phyllosilicate-rich fault gouge that bound lenses of variably broken-up protolith. This arrangement provides a number of fluid flow and fluid sealing possibilities within the fault zone. The gouge strands exhibit distributed deformation and are inferred to have strain hardening and/or velocity hardening characteristics. Also included in the fault zone are blocks of dolomite that contain thin (<1 cm thick) fault planes inferred to have been produced by strain weakening/velocity weakening behaviour. These fault planes have a predominantly R1 Riedel shear orientation and are arranged in an en echelon pattern. A conceptual model of this type of wide fault zone is proposed which contrasts with previous narrow fault zone models. The observed structural and inferred mechanical characteristics of the Carboneras fault zone are compared to seismological observations of the San Andreas fault around Parkfield, CA. Similarities suggest that the Carboneras fault structure may be a useful analogue for this portion of the San Andreas fault at depth. 相似文献
12.
西秦岭北缘构造带不仅发育一系列继承性多期活动或新生的近东西向断层,而且新生代地层中还发育与近东西向断层走向不一致且具有独特构造特征的北西向左旋走滑断层。这种北西向左旋走滑断层带不发育断层角砾岩、磨砾岩、碎粉岩、断层泥、摩擦镜面、擦痕线理、断层阶步等脆性断层中常见的构造现象,仅表现为地层旋转和剪切拉断形成的一定宽度的透镜化带,两条断层之间地层产状发生旋转形成了约1 km宽,平面上类似膝折构造几何形态地层扭折带。该北西向断层横切了渐新统—中新统地层,并被上新统砾岩覆盖和第四纪以来的近东西向左旋走滑断层斜切,指示了其形成于渐新世—中新世沉积地层形成之后,上新世砾岩沉积之前,即上新世早期。北西向断层带不发育脆性断层典型构造现象和断层左旋走滑作用在渐新统—中新统沉积地层中形成了类似膝折构造几何形态地层扭折带,说明其变形具有韧脆性过渡和缓慢剪切变形的特征,是西秦岭北缘一种新的断层类型。其形成机制为基底或中下地壳中大型左旋走滑韧性或韧脆性剪切带向上扩展延伸到上部沉积盖层中之结果,也就是说,新生代沉积盖层中这种北西向断层和地层扭折带是下部韧性剪切带的左旋走滑剪切在盖层中被动构造响应。这种基底或中下地壳北西向左旋韧性剪切带可能指示了上新世初期西秦岭北缘构造带深部韧性地壳物质向南东流变蠕动的构造标志,代表深部地壳缩短增厚向地壳韧性物质侧向扩展流动的转换过程。这种特殊的断层类型对理解青藏高原东北缘新生代构造变形体制转换和地壳隆升具有重要的科学意义。 相似文献
13.
A regional lineament of highly parallelized planar and linear structures can be followed over a distance of 150 km from the coast to the Inland Ice at Nordre Strømfjord in central West Greenland. This shear zone is situated within the Nagssugtoqidian mobile belt and transects an area of intricate interference structures, from which it has been formed by high shear strain. By using data for the orientation of planar structures outside and within the zone, the shear strain is calculated to be approximately 6. This value applies to the shear zone close to the coast where its width is approximately 15 km. The zone is cut by the granulite/amphibolite facies boundary, and towards lower metamorphic grade the width of the zone decreases. At the same time the shear strain increases, so that the offset across the zone could be constant irrespective of width. At the coast, where the zone has been mapped, the fanning of planar structures shows the zone to be wedge-shaped, thinning upwards.It is therefore suggested that the zone represents a deep-seated ductile part of a major, transcurrent fault with a sinistral displacement of at least 100 km. 相似文献
14.
闽—粤东南沿海大陆边缘韧性剪切带的基本特征 总被引：2，自引：0，他引：2
东南沿海大陆边缘剪切带是西太平洋活动大陆边缘构造带的组成部分,它是一条具有多次活动的左旋韧性平移剪切带。在本剪切带中可以观察到3种类型的构造:（1）规模巨大的呈北北东—北东向展布的糜棱岩带以及山拉伸线理组成的线状构造带。它们在平面上有明显的从断目两侧向中心递进变形特征;（2）呈北东走向陡倾角的糜棱叶理（Sa）、应变滑劈理或破劈理（Sb）、小型剪切带（Sc）;（3）由西到东断层作用样式和断层岩具有明显的递进变化特点。西部（浅部）断层作用以脆性剪切滑动为主,其断层岩则由假玄武玻璃及镜面糜棱岩组成;中部断层作用以跪—韧性剪切为主,为断层泥—碎裂岩—超碎裂岩;东部(深部,以韧性剪切作用为主,其断层岩为暖棱岩—花岗糜桂片麻岩—眼球状糜棱岩系列。以上特点表明在本剪切带内透入性和非透入性变形之间有着密切的关系,反映出在变形过程中具有由韧性变形逐渐向脆性变形的发展趋势。 相似文献
15.
R. A. Schweickert M. M. Lahren K. D. Smith J. F. Howle G. Ichinose 《Tectonophysics》2004,392(1-4):303
Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south Shmax in magnitude until it is less than Sv, at which point Sv becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension. 相似文献
16.
N. V. Koronovsky G. N. Gogonenkov M. A. Goncharov A. I. Timurziev N. S. Frolova 《Geotectonics》2009,43(5):379-391
An unusual structural paragenesis, complicated by brachyanticlines, is revealed for the first time in the sedimentary cover
of the West Siberian Plate by 3D seismic surveying. These are linear (in plan view) systems of en-echelon arranged low-amplitude
normal faults related to wrench faults in the basement. On different sides off a wrench fault, the planes of normal faults
dip in opposite directions, forming a helicoidal structure that resembles the blades of a propeller. In the section parallel
to the wrench fault, the boundaries of the beds and normal fault planes dip in opposite directions as well. In the section
across the strike of the normal faults converging toward the basement, the beds take the shape of an antiform with a crest
sagged along the normal faults (flower structure). This structural assembly was formed as a result of interference of stress
fields of horizontal shear in the vertical plane (induced by faulting in the basement) and in the horizontal plane (caused
by gravity resistance of the cover). In this case, the displacements along the normal faults develop in both the vertical
and, to a greater extent, horizontal directions, so that the faults in cover are actually characterized by normal-strike-slip
kinematics. The regional N-S-trending compression of the West Siberian Plate is the main cause of shearing along the NW- and
NE-trending faults in the basement, which make up a rhomb-shaped system in plan view. Petroliferous brachyanticlines, whose
axes, notwithstanding tectonophysical laws, are oriented in the direction close to the maximum compression axis, are known
in the large wrench fault zones of Western Siberia. Our experiments with equivalent materials showed that a local stress field
arising at the ends of echeloned Riedel shears within a wrench fault zone may be a cause of the formation of such brachyanticlines.
The progressive elongation of Riedel shears leads to the corresponding elongation of the brachyanticlines located between
their ends. The performed study has shown that the known types of interference of elementary geodynamic settings such as horizontal
shear along the vertical plane + horizontal compression (transpression) and horizontal shear along the vertical plane + horizontal
extension (transtension) may be supplemented by combination of horizontal shears along the vertical and horizontal planes,
resulting in tectonic lamination. By analogy, we propose to name this type of interference of elementary shear settings translamination. Petroliferous helicoidal structures arise in the given geodynamic setting of translamination. 相似文献
17.
《International Geology Review》2012,54(8):771-784
The Tan-Lu fault zone, with hundreds of km of sinistral displacenent, is one of the largest continental strike-slip faults in the world. Four tectonic models recently proposed for the fault zone are reviewed in this paper: (1) intracontinental transcurrent fault, (2) suture line, (3) intracontinental transform fault, (4) and collision-related indentation. We propose that the Tan-Lu fault zone is a major transcurrent fault developed on the inner, continental side of the northwestern circum-Pacific margin. This conclusion is based on the shape and extension of the fault zone, correlation of blocks on either side of the zone, Late Jurassic to Early Cretaceous displacement time, and the sinistral fault origin of the northward-projecting Northern Jiangsu Massif. 相似文献
18.
G.J. Lensen 《Tectonophysics》1979,52(1-4)
Recent field studies demonstrate the southern and northern parts of the Alpine fault to be dominantly under right-lateral shear. The central portion of this fault is dominantly under compression.The Marlborough—North Island dextral shear zone, together with the Fiordland and NW Nelson sinistral shear zones, demonstrate these shears to result from lateral drag within these zones and is only partially transmitted to the central section of the Alpine fault which is dominantly reverse in character.Regional extension in the North Island west of the shear belt and regional shortening in the South Island indicate clockwise rotation at the east side of the Alpine fault and its extension in the North Island relative to the west side about a “pole” on the Alpine fault in the north of the South Island. 相似文献
19.
John N. Louie Weston Thelen Shane B. Smith James B. Scott Matthew Clark Satish Pullammanappallil 《Tectonophysics》2004,388(1-4):253
In May 2002, we collected a new crustal refraction profile from Battle Mountain, Nevada across western Nevada, the Reno area, Lake Tahoe, and the northern Sierra Nevada Mountains to Auburn, CA. Mine blasts and earthquakes were recorded by 199 Texan instruments extending across this more than 450-km-long transect. The use of large mine blasts and the ultra-portable Texan recorders kept the field costs of this profile to less than US$10,000. The seismic sources at the eastern end were mining blasts at Barrick's GoldStrike mine. The GoldStrike mine produced several ripple-fired blasts using 8000–44,000 kg of ANFO each, a daily occurrence. First arrivals from the larger GoldStrike blasts are obvious to distances of 300 km in the raw records. First arrivals from a quarry blast west of the survey near Watsonville, CA, located by the Northern California Seismic Network with a magnitude of 2.2, can be picked across the recording array to distances of 600 km. The Watsonville blast provides a western source, nearly reversing the GoldStrike blasts. A small earthquake near Bridgeport, CA. also produced pickable P-wave arrivals across the transect, providing fan-shot data. Arrivals from M5 events in the Mariana and Kuril Islands also appear in the records. This refraction survey observes an unexpectedly deep crustal root under the northern Sierra Nevada range, over 50 km in thickness and possibly centered west of the topographic crest. Pn delays of 4–6 s support this interpretation. At Battle Mountain, Nevada, we observe anomalously thin crust over a limited region perhaps only 150 km wide, with a Moho depth of 19–23 km. Pn crossover distances of less than 80 km support this anomaly, which is surrounded by observations of more normal, 30-km-thick crust. A 10-km-thick and high-velocity lower-crustal “pillow” is an alternative hypothesis, but unlikely due to the lack of volcanics west of Battle Mountain. Large mine and quarry blasts prove very effective crustal refraction sources when recorded with a dense receiver array, even over distances exceeding 600 km. New elastic synthetic seismogram modeling suggests that Pn can be strong as a first arrival, easing the modeling and interpretation of crustal refraction data. Fast eikonal computations of first-arrival time can match pickable Pn arrival times. 相似文献