首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Monterey East system is formed by large‐scale sediment waves deposited as a result of flows stripped from the deeply incised Monterey fan valley (Monterey Channel) at the apex of the Shepard Meander. The system is dissected by a linear series of steps that take the form of scour‐shaped depressions ranging from 3·5 to 4·5 km in width, 3 to 6 km in length and from 80 to 200 m in depth. These giant scours are aligned downstream from a breech in the levee on the southern side of the Shepard Meander. The floor of the breech is only 150 m above the floor of the Monterey fan valley but more than 100 m below the levee crests resulting in significant flow stripping. Numerical modeling suggests that the steps in the Monterey East system were created by Froude‐supercritical turbidity currents stripped from the main flow in the Monterey channel itself. Froude‐supercritical flow over an erodible bed can be subject to an instability that gives rise to the formation of cyclic steps, i.e. trains of upstream‐migrating steps bounded upstream and downstream by hydraulic jumps in the flow above them. The flow that creates these steps may be net‐erosional or net‐depositional. In the former case it gives rise to trains of scours such as those in the Monterey East system, and in the latter case it gives rise to the familiar trains of upstream‐migrating sediment waves commonly seen on submarine levees. The Monterey East system provides a unique opportunity to introduce the concept of cyclic steps in the submarine environment to study processes that might result in channel initiation on modern submarine fans.  相似文献   

2.
Abstract A study of the seafloor of the Gulf of Cadiz west of the Strait of Gibraltar, using an integrated geophysical and sedimentological data set, gives new insights into sediment deposition from downslope thermohaline bottom currents. In this area, the Mediterranean Outflow (MO) begins to mix with North Atlantic waters and separates into alongslope geostrophic and downslope ageostrophic components. Changes in bedform morphology across the study area indicate a decrease in the peak velocity of the MO from >1 m s?1 to <0·5 m s?1. The associated sediment waves form a continuum from sand waves to muddy sand waves to mud waves. A series of downslope‐oriented channels, formed by the MO, are found where the MO starts to descend the continental slope at a water depth of ≈700 m. These channels are up to 40 km long, have gradients of <0·5°, a fairly constant width of ≈2 km and a depth of ≈75 m. Sand waves move down the channels that have mud wave‐covered levees similar to those seen in turbidite channel–levee systems, although the channel size and levee thickness do not decrease downslope as in typical turbidite channel systems. The channels terminate abruptly where the MO lifts off the seafloor. Gravity flow channels with lobes on the basin floor exist downslope from several of the bottom current channels. Each gravity flow system has a narrow, slightly sinuous channel, up to 20 m deep, feeding a depositional lobe up to 7 km long. Cores from the lobes recovered up to 8·5 m of massive, well‐sorted, fine sand, with occasional mud clasts. This work provides an insight into the complex facies patterns associated with strong bottom currents and highlights key differences between bottom current and gravity flow channel–levee systems. The distribution of sand within these systems is of particular interest, with applications in understanding the architecture of hydrocarbon reservoirs formed in continental slope settings.  相似文献   

3.
Levees on the lower Tuross River in south-eastern Australia reflect a complex interplay between depositional and erosional processes. Stream power, conditioned primarily by valley width, is the key determinant of levee morphology and sedimentology in this confined valley setting. Three styles of levee are described. The Rewlee levee is functionally linked to a flood channel in narrow valley settings (< 250 m). These levees contain a diverse facies assemblage characterized by various scales of erosion surfaces. Vertical accretion on levees has produced conditions under which stream power values exceed the threshold for catastrophic floodplain stripping. The levee at the Mortfield site is associated with less confined settings (valley width 500–600 m), which present lower flood stage and stream power conditions. This levee hosts a wide range of facies, but erosion surfaces are seldom observed. In the more open valley setting at the Central site (valley width 700–1000 m), levees comprise uniform, fine-grained deposits, which grade to pronounced distal floodplains with backswamps. As levees reflect a combination of within-channel and overbank processes, both depositional and erosional, these geomorphic features influence the character and sedimentology of adjacent landforms and the associated alluvial architecture of the basin.  相似文献   

4.
《Sedimentology》2018,65(3):931-951
Submarine leveed channels are sculpted by turbidity currents that are commonly highly stratified. Both the concentration and the grain size decrease upward in the flow, and this is a fundamental factor that affects the location and grain size of deposits around a channel. This study presents laboratory experiments that link the morphological evolution of a progressively developing leveed channel to the suspended sediment structure of the turbidity currents. Previously, it was difficult to link turbidity current structure to channel–levee development because observations from natural systems were limited to the depositional products while experiments did not show realistic morphodynamics due to scaling issues related to the sediment transport. This study uses a novel experimental approach to overcome scaling issues, which results in channel inception and evolution on an initially featureless slope. Depth of the channel increased continuously as a result of levee aggradation combined with varying rates of channel floor aggradation and degradation. The resulting levees are fining upward and the grain‐size trend in the levee matches the upward decrease in grain size in the flow. It is shown that such deposit trends can result from internal channel dynamics and do not have to reflect upstream forcing. The suspended sediment structure can also be linked to the lateral transition from sediment bypass in the channel thalweg to sediment deposition on the levees. The transition occurs because the sediment concentration is below the flow capacity in the channel thalweg, while higher up on the channel walls the concentration exceeds capacity resulting in deposition of the inner levee. Thus, a framework is provided to predict the growth pattern and facies of a levee from the suspended sediment structure in a turbidity current.  相似文献   

5.
Submarine channel levees aggrade through repeated overspill events from the channel axis. The shape of the levees may therefore reflect some characteristic(s) of the overspilling flow. It has been noted that basin floor levees typically have a relatively low-relief and taper exponentially to their termination; in contrast slope channel levees may be much steeper close to the channel. A simple physical experiment was performed where a surge-like sediment-laden current flowed through a curved channel. Significant overspill occurred and generated a deposit flanking the channel on either side. The experiment was repeated 25 times to build up low-relief channel-levees. It was found that in proximal areas, levees were steep and characterised by power-law decays, a transitional zone of logarithmically thinning levee was found a little further down-channel, followed by exponential decays in medial to distal areas. The style of levee decay is a function of spatial variation in overbank sedimentation rates. Where flows rapidly lose momentum and deposit across the grain-size spectrum, i.e., in proximal areas, levees tend to be steep; farther down the channel, the steep levee slope gives way to a more gradually tapering deposit. In more distal parts of the channel, deposition is directly related to sediment settling velocity (rather than the suspended load exceeding flow transport capacity as is the case in proximal areas), the deposit reflects this with relatively simple exponential thickness decays. Additionally, small-scale sediment waves developed under lee wave conditions on the inner-bend overbank. The waves initially migrated slightly towards the channel, but as the style of overspill evolved due to intra-channel deposition, flows moved out of the lee wave window and sedimentation became out of phase with the wavelength of the features and the topography was healed.  相似文献   

6.
Flume experiments were performed to study the flow properties and depositional characteristics of high‐density turbidity currents that were depletive and quasi‐steady to waning for periods of several tens of seconds. Such currents may serve as an analogue for rapidly expanding flows at the mouth of submarine channels. The turbidity currents carried up to 35 vol.% of fine‐grained natural sand, very fine sand‐sized glass beads or coarse silt‐sized glass beads. Data analysis focused on: (1) depositional processes related to flow expansion; (2) geometry of sediment bodies generated by the depletive flows; (3) vertical and horizontal sequences of sedimentary structures within the sediment bodies; and (4) spatial trends in grain‐size distribution within the deposits. The experimental turbidity currents formed distinct fan‐shaped sediment bodies within a wide basin. Most fans consisted of a proximal channel‐levee system connected in the downstream direction to a lobe. This basic geometry was independent of flow density, flow velocity, flow volume and sediment type, in spite of the fact that the turbidity currents of relatively high density were different from those of relatively low density in that they exhibited two‐layer flow, with a low‐density turbulent layer moving on top of a dense layer with visibly suppressed large‐scale turbulence. Yet, the geometry of individual morphological elements appeared to relate closely to initial flow conditions and grain size of suspended sediment. Notably, the fans changed from circular to elongate, and lobe and levee thickness increased with increasing grain size and flow velocity. Erosion was confined to the proximal part of the leveed channel. Erosive capacity increased with increasing flow velocity, but appeared to be constant for turbidity currents of different grain size and similar density. Structureless sediment filled the channel during the waning stages of the turbidity currents laden with fine sand. The adjacent levee sands were laminated. The massive character of the channel fills is attributed to rapid settling of suspension load and associated suppression of tractional transport. Sediment bypassing prevailed in fan channels composed of very fine sand and coarse silt, because channel floors remained fully exposed until the end of the experiments. Lobe deposits, formed by the fine sand‐laden, high‐density turbidity currents, contained massive sand in the central part grading to plane parallel‐laminated sand towards the fringes. The depletive flows produced a radial decrease in mean grain size in the lobe deposits of all fans. Vertical trends in grain size comprised inverse‐to‐normal grading in the levees and in the thickest part of the lobes, and normal grading in the channel and fringes of the fine sandy fans. The inverse grading is attributed to a process involving headward‐directed transport of relatively fine‐grained and low‐concentrated fluid at the level of the velocity maximum of the turbidity current. The normal grading is inferred to denote the waning stage of turbidity‐current transport.  相似文献   

7.
The Petit-Rhône Fan Valley (north-western Mediterranean) is a broad, sinuous, filled valley that is deeply incised by a narrow, sinuous thalweg. The valley fill is differentiated into three seismic subunits on high-resolution seismic-reflection profiles. The lower chaotic subunit probably consists of channel lag deposits that seem to be in lateral continuity with high-amplitude reflections representing levee facies. The intermediate transparent subunit, which has an erosional base and clearly truncates levee deposits, is interpreted to be mass-flow deposits resulting from the disintegration of the fan-valley flanks. The upper bedded subunit shows an overall lens-shaped geometry and the seismic reflections onlap either onto the top of the underlying transparent subunit or onto the Rhône levees. Piston core data show that the upper few meters of this upper subunit consist of thin turbidites, probably deposited by overflow processes. The few available 14C ages suggest that the upper stratified subunit filled the Petit-Rhône Fan Valley between 21 and 11 kyr BP. The upper bedded subunit is deposited within the Petit-Rhône Fan Valley downslope of a major decrease in slope gradient. This upper subunit and the thalweg are genetically related and represent a small channel/levee system confined within the fan valley. Previous studies interpreted this thalweg to be an erosional feature resulting from a recent avulsion of the major channel course. Our interpretation implies that the thalweg is not a purely erosional feature but a depositional/erosional channel. This small channel/levee system is superimposed on a large muddy channel/levee system after the sediment supply changed from thick muddy flows during the main phase of aggradation of the Rhône Fan levees, to thin, mixed (sand and mud) flows at the end of Isotope Stage 2 (～16–18 ka BP). The pre-existing morphology of the Petit-Rhône Fan Valley played a determinant role in the sediment dispersal leading to the creation of this small and confined channel/levee system. These mixed flows have undergone flow stripping resulting from the changes in the slope gradient along the thalweg course. The finer sediment overflowed from the thalweg and were deposited in the Petit-Rhône Fan Valley. Coarser channelled sediment remaining in the thalweg were deposited as a ‘sandy’lobe (Neofan). As indicated by 14C dating, sedimentation on this lobe continued until very recently, suggesting a further evolution of the turbidity flows from small mixed flows to small sandy flows. the deposition of this study lobe and the sedimentary fill of the Petit-Rhône Fan Valley may be related to widespread shelf edge and canyon wall failures with a resulting downslope evolution of failed sediment into turbidity currents.  相似文献   

8.
Submarine external levées are constructional features that develop outside slope channel systems, and are a volumetrically significant component of continental margins. However, detailed observations of their process sedimentology and depositional architecture are rare. Extensive exposures of external levées at multiple stratigraphic intervals and well‐constrained palaeogeographic positions in the Fort Brown Formation, Karoo Basin, South Africa, have been calibrated with research boreholes. This integrated data set permits their origin, evolution and anatomy to be considered, including high‐resolution analysis of sedimentary facies distribution and characterization of depositional sub‐environments. An idealized model of the stratigraphic evolution and depositional architecture of external levées is presented, and variations can be attributed to allogenic (for example, sediment supply) and autogenic (for example, channel migration) factors. Initiation of external levée construction is commonly marked by deposition of a basal sand‐rich facies with sedimentary structures indicating rapid deposition from unconfined flows. These deposits are interpreted as frontal lobes. Propagation of the parent channel, and resultant flow confinement, lead to partial erosion of the frontal lobe and development of constructional relief (levées) by flow overspill and flow stripping. Overall fining‐upwards and thinning‐upwards profiles reflect increased flow confinement and/or waning flow magnitude through time. Identification of a hierarchy of levée elements is not possible due to the absence of internal bounding surfaces or sharp facies changes. The down‐slope taper in levée height and increasing channel sinuosity results in increasing numbers of crevasse lobe deposits, and is reflected by the increased occurrences of channel avulsion events down‐dip. External levées from the Fort Brown Formation are silt‐rich; however their stratigraphic evolution and the distribution of many components (such as sediment waves and crevasse lobe) share commonalities with mud‐rich external levées. This unique integrated data set has permitted the first high‐resolution characterization of external submarine levée systems.  相似文献   

9.
Subaqueous sediment gravity flow is the volumetrically most important process transporting sediment across our planet, which forms its largest sediment accumulations (submarine fan). Based on the previous studies, we tried to clear up the concept, classification and identification of subaqueous sediment gravity flow, and introduced the progress of modern direct observation and submarine fan model. Turbidity current and debris flow are two of the most important parts of the gravity flow, the former deposits layer by layer with normal gradation while the latter is en masse settling with chaotic disorder. The turbidity current transformed into the debris flow during the transportation is called hybrid flow. The hyperpycnal flow is the turbidity current formed by flood discharges into the ocean/lake. Modern direct observations show that the turbidity current can contain dense basal layers and last for a week. The structure of turbidity current can be different from those surge-like turbidity current observed in laboratory. Submarine fans are mainly composed of channel, levee, lobe, background deposits and mass transport deposits, which should be studied by architecture analysis and hierarchical classification. The channel deposits extend narrowly with abundant erosion structures; levee deposits are composed of thin layer mud-silty turbidites, wedge thinning laterally; the lobe deposits extend well laterally with narrow range of grain size. The hierarchy of channel deposits is channel unit, channel complex and channel complex system. The hierarchy of lobe deposits is bed, lobe element, lobe and lobe complex.  相似文献   

10.
The development of mudwaves on the levees of the modern Toyama deep‐sea channel has been studied using gravity core samples combined with 3·5‐kHz echosounder data and airgun seismic reflection profiles. The mudwaves have developed on the overbank flanks of a clockwise bend of the channel in the Yamato Basin, Japan Sea, and the mudwave field covers an area of 4000 km2. Mudwave lengths range from 0·2 to 3·6 km and heights vary from 2 to 44 m, and the pattern of mudwave aggradation indicates an upslope migration direction. Sediment cores show that the mudwaves consist of an alternation of fine‐grained turbidites and hemipelagites whereas contourites are absent. Core samples demonstrate that the sedimentation rate ranged from 10 to 14 cm ka?1 on the lee sides to 17–40 cm ka?1 on the stoss sides. A layer‐by‐layer correlation of the deposits across the mudwaves shows that the individual turbidite beds are up to 20 times thicker on the stoss side than on the lee side, whereas hemipelagite thicknesses are uniform. This differential accretion of turbidites is thought to have resulted in the pattern of upcurrent climbing mudwave crests, which supports the notion that the mudwaves have been formed by spillover turbidity currents. The mudwaves are interpreted to have been instigated by pre‐existing large sand dunes that are up to 30 m thick and were created by high‐velocity (10°ms?1), thick (c. 500 m) turbidity currents spilling over the channel banks at the time of the maximum uplift of the Northern Japan Alps during the latest Pliocene to Early Pleistocene. Draping of the dunes by the subsequent, lower‐velocity (10?1ms?1), mud‐laden turbidity currents is thought to have resulted in the formation of the accretionary mudwaves and the pattern of upflow climbing. The dune stoss slopes are argued to have acted as obstacles to the flow, causing localized loss of flow strength and leading to differential draping by the muddy turbidites, with greater accretion occurring on the stoss side than on the lee slope. The two overbank flanks of the clockwise channel bend show some interesting differences in mudwave development. The mudwaves have a mean height of 9·8 m on the outer‐bank levee and 6·2 m on the inner bank. The turbidites accreted on the stoss sides of the mudwaves are 4–6 times thicker on the outer‐bank levee than their counterparts on the inner‐bank levee. These differences are attributed to the greater flow volume (thickness) and sediment flux of the outer‐bank spillover flow due to the more intense stripping of the turbidity currents at the outer bank of the channel bend. Differential development of mudwave fields may therefore be a useful indicator in the reconstruction of deep‐sea channels and their flow hydraulics.  相似文献   

11.
深水水道是陆坡沉积的重要组成单元,深水水道储层受到广泛关注。基于高分辨率三维地震资料,利用地震属性、分频技术等研究穆尼盆地第四纪深水弯曲水道的沉积构型、成因及沉积过程,主要取得以下3个方面的成果:(1)建立了深水弯曲水道沉积构型模式。弯曲深水水道由水道和堤岸组成。堤岸脊将堤岸分成内堤岸和外堤岸两部分。水道由底部粗粒滞留沉积、深海泥质披覆沉积以及滑块组成。(2)深水水道早期为低弯曲水道,后期逐渐演化为高弯曲水道。(3)建立了深水弯曲水道沉积的岩相模式,深水弯曲水道由垂向加积水道和侧向迁移水道组成。顺重力流方向,侧向迁移带,内弯带以沉积作用为主,外弯带以侵蚀作用为主。垂向加积带,水道底部粗粒滞留沉积往往表现为垂向加积特征。深水弯曲水道岩相模式的建立对深水浊积水道储层准确预测具有重要的理论指导意义。  相似文献   

12.
The Miocene Gorgoglione Flysch Formation records the stratigraphic product of protracted sediment transfer and deposition through a long‐lived submarine channel system developed in a narrow and elongate thrust‐top basin of the Southern Apennines (Italy). Channel‐fill deposits are exposed in an outcrop belt approximately 500 m thick and 15 km long, oriented oblique to the palaeoflow, which was roughly south‐eastward. These exceptional exposures of channel‐fill strata allow the stacking architectures and the evolution of the channel system to be analyzed at multiple scales, enabling the effects of syn‐sedimentary thrust tectonics and basin confinement on the depositional system development to be deciphered. Two end‐member types of elementary channel architecture have been identified: high‐aspect‐ratio, weakly‐confined channels, and low‐aspect‐ratio, incisional channels. Their systematic stacking results in a complex pattern of seismic‐scale depositional architectures that determines the stratigraphic framework of the deep‐water system. From the base of the succession, two prominent channel complex sets have been recognized, namely CS1 and CS2, consisting of amalgamated incisional channel elements and weakly‐confined channel elements. These channelized units are overlain by isolated incisional channels, erosional into mud‐prone slope deposits. The juxtaposition of different channel architectures is interpreted to have been governed by regional thrust‐tectonics, in combination with a high subsidence rate that promoted significant aggradation. In this scenario, the alternating ‘in sequence’ and ‘out of sequence’ tectonic pulses of the basin‐bounding thrusts controlled the activation of coarse‐clastic inputs in the basin and the resulting stacking architectures of channelized units. The tectonically‐driven confinement of the depositional system limited the lateral offset in channel stacking, preventing large‐scale avulsions. This study represents an excellent opportunity to analyze the stratigraphic evolution of a submarine channel system in tectonically‐active settings from an outcrop perspective. It should find wide applicability in analogous depositional systems, whose stratigraphic architecture has been influenced by tectonically‐controlled lateral confinement and associated lateral tilting.  相似文献   

13.
Sandy lobe deposits on submarine fans are sensitive recorders of the types of sediment gravity flows supplied to a basin and are economically important as hydrocarbon reservoirs. This study investigates the causes of variability in 20 lobes in small late Pleistocene submarine fans off East Corsica. These lobes were imaged using ultra‐high resolution boomer seismic profiles (<1 m vertical resolution) and sediment type was ground truthed using piston cores published in previous studies. Repeated crossings of the same depositional bodies were used to measure spatial changes in their dimensions and architecture. Most lobes increase abruptly down‐slope to a peak thickness of 8 to 42 m, beyond which they show a progressive, typically more gradual, decrease in thickness until they thin to below seismic resolution or pass into draping facies of the basin plain. Lobe areas range from 3 to 70 km2 and total lengths from 2 to 14 km, with the locus of maximum sediment accumulation from 3 to 28 km from the shelf‐break. Based on their location, dimensions, internal architecture and nature of the feeder channel, the lobes are divided into two end‐member types. The first are small depositional bodies located in proximal settings, clustered near the toe‐of‐slope and fed by slope gullies or erosive channels lacking or with poorly developed levées (referred to as ‘proximal isolated lobes’). The second are larger architecturally more complex depositional bodies deposited in more distal settings, outboard more stable and longer‐lived levéed fan valleys (referred to as ‘composite mid‐fan lobes’). Hybrid lobe types are also observed. At least three hierarchical levels of compensation stacking are recognized. Individual beds and bed‐sets stack to form lobe‐elements; lobe‐elements stack to form composite lobes; and composite lobes stack to form lobe complexes. Differences in the size, shape and architectural complexity of lobe deposits reflect several inter‐related factors including: (i) flow properties (volume, duration, grain‐size, concentration and velocity); (ii) the number and frequency of flows, and their degree of variation through time; (iii) gradient change and sea floor morphology at the mouth of the feeder conduit; (iv) lobe lifespan prior to avulsion or abandonment; and (v) feeder channel geometry and stability. In general, lobes outboard stable fan valleys that are connected to shelf‐incised canyons are wider, longer and thicker, accumulate in more basinal locations and are architecturally more complex.  相似文献   

14.
Flow parameters (velocity and density) for turbidity currents in the Northwest Atlantic Mid-Ocean Channel (NAMOC) have been determined based on two different approaches, channel geometry and grain-size distributions of turbidites. Channel geometry has been obtained by a quantitative morphological analysis of the NAMOC which shows three genetically different segments in the upper 2000 km: (1) an upper 350 km-long ‘equilibrium channel’, (2) a middle 700 km-long ‘modified equilibrium channel’and (3) a lower ‘basement-controlled channel’which is more than 1000 km-long. In contrast to other meandering submarine channels the NAMOC has very low sinuosities and gradients. A consistently higher right-hand levee limits mean flow velocities to 3ms?1 and channel geometry indicates mean flow velocities of 0·86 m s?1 that decrease within the equilibrium channel to 0·05 m s?1. Grain-size distributions on the levees and in the channel suggest strong vertical velocity and density gradients for bank-full flows with velocities of up to 8 m s?1 and excess densities up to 87 kg m?3 at the base, and 0·45 m s?1 and 4 kg m?3 at the top. The internal shear produced by these strong vertical gradients results in a decoupling of the current head and body. Channel geometry appears to be mainly the result of the slowly moving dilute body of the current.  相似文献   

15.
Two large (200 to 300 km), near‐continuous outcrop transects and extensive well‐log data (ca 2800 wells) allow analysis of sedimentological characteristics and stratigraphic architecture across a large area (ca 60 000 km2) of the latest Santonian to middle Campanian shelf along the western margin of the Western Interior Seaway in eastern Utah and western Colorado, USA. Genetically linked depositional systems are mapped at high chronostratigraphic resolution (ca 0·1 to 0·5 Ma) within their sequence stratigraphic context. In the lower part of the studied interval, sediment was dispersed via wave‐dominated deltaic systems with a ‘compound clinoform’ geomorphology in which an inner, wave‐dominated shoreface clinoform was separated by a muddy subaqueous topset from an outer clinoform containing sand‐poor, gravity‐flow deposits. These strata are characterized by relatively steep, net‐regressive shoreline trajectories (>0·1°) with concave‐landward geometries, narrow nearshore belts of storm‐reworked sandstones (2 to 22 km), wide offshore mudstone belts (>250 km) and relatively high sediment accumulation rates (ca 0·27 mm year?1). The middle and upper parts of the studied interval also contain wave‐dominated shorefaces, but coeval offshore mudstones enclose abundant ‘isolated’ tide‐influenced sandstones that were transported sub‐parallel to the regional palaeoshoreline by basinal hydrodynamic (tidal?) circulation. These strata are characterized by relatively shallow, net‐regressive shoreline trajectories (<0·1°) with straight to concave‐seaward geometries, wide nearshore belts of storm‐reworked sandstones (19 to 70 km), offshore mudstone belts of variable width (130 to >190 km) and relatively low sediment accumulation rates (ca ≤0·11 mm year?1). The change in shelfal sediment dispersal and stratigraphic architecture, from: (i) ‘compound clinoform’ deltas characterized by across‐shelf sediment transport; to (ii) wave‐dominated shorelines with ‘isolated’ tide‐influenced sandbodies characterized by along‐shelf sediment transport, is interpreted as reflecting increased interaction with the hydrodynamic regime in the seaway as successive shelfal depositional systems advanced out of a sheltered embayment (‘Utah Bight’). This advance was driven by a decreasing tectonic subsidence rate, which also suppressed autogenic controls on stratigraphic architecture.  相似文献   

16.
Submarine slope channel systems have complicated three-dimensional geometries and facies distributions, which are challenging to resolve using subsurface data. Outcrop analogues can provide sub-seismic-scale detail, although most exhumed systems only afford two-dimensional constraints on the depositional architecture. A rare example of an accessible fine-grained slope channel complex set situated in a tectonically quiescent basin that offers seismic-scale, down-dip and across-strike exposures is the Klein Hangklip area, Tanqua-Karoo Basin, South Africa. This study investigates the three-dimensional architecture of this channel complex set to characterise the stratigraphic evolution of a submarine channel-fill and the implications this has for both sediment transport to the deep-oceans and reservoir quality distribution. Correlated sedimentary logs and mapping of key surfaces across a 3 km2 area reveal that: (i) the oldest channel elements in channel complexes infill relatively deep channel cuts and have low aspect-ratios. Later channel elements are bound by comparatively flat erosion surfaces and have high aspect-ratios; (ii) facies changes across depositional strike are consistent and predictable; conversely, facies change in successive down depositional dip positions indicating longitudinal variability in depositional processes; (iii) stratigraphic architecture is consistent and predictable at seismic-scale both down-dip and across-strike in three-dimensions; (iv) channel-base-deposits exhibit spatial heterogeneity on one to hundreds of metres length-scales, which can inhibit accurate recognition and interpretations drawn from one-dimensional or limited two-dimensional datasets; and (v) channel-base-deposit character is linked to sediment bypass magnitude and longevity, which suggests that time-partitioning is biased towards conduit excavation and maintenance rather than the fill-phase. The data provide insights into the stratigraphic evolution and architecture of slope channel-fills on fine-grained continental margins and can be utilised to improve predictions derived from lower resolution and one-dimensional well data.  相似文献   

17.
利用实地考察、浅钻孔、探槽及卫星影像等方法,对鄱阳湖信江决口三角洲进行了系统研究。该决口三角洲是洪水冲破信江西岸天然堤流入附近的河漫湖泊形成的,其平面形态为鸟足状,总体延伸方向与主河道近垂直。在横切剖面上整个决口三角洲沉积体呈透镜状覆盖在早期的湿地或河漫湖泊沉积之上。鄱阳湖信江决口三角洲可分为3个亚相:决口三角洲平原、决口三角洲前缘和决口前三角洲。决口三角洲平原主要发育决口河道、决口天然堤、废弃决口河道和湿地,其中决口河道又可以进一步划分为决口水道、边滩、汊口滩;决口三角洲前缘主要发育河口坝、支流间湾。河漫湖泊规模小、深度浅、波浪能量弱,对河口坝和决口河道砂体的改造较弱,不易形成连片分布的席状砂;决口前三角洲不发育。决口三角洲沉积受河流作用和河漫湖泊作用的共同控制,其演化可以划分为主河道天然堤生长阶段、决口初期阶段、进积分汊阶段及分汊—废弃阶段4个阶段。  相似文献   

18.
The Mackenzie Delta is a large fine‐grained delta deposited in a cold arctic setting. The delta has been constructed upon a flooding surface developed on a previous shelf‐phase delta. There are three principal depositional zones: the subaerial delta plain, the distributary channel mouth region and the subaqeous delta. The subaerial delta plain is characterized by an anastomosing system of high‐sinuosity channels and extensive thermokarst lake development. This region is greatly influenced by the annual cycle of seasonal processes including winter freezing of sediments and channels, ice‐jamming and flooding in the early spring and declining river stage during the summer and autumn. Deposition occurs on channel levees and in thermokarst lakes during flood events and is commonly rhythmic in nature with discrete annual beds being distinguishable. In the channel mouth environment, deposition is dominated by landward accretion and aggradation of mouth bars during river‐ and storm surge‐induced flood events. The subaqeous delta is characterized by a shallow water platform and a gentle offshore slope. Sediment bypassing of the shallow‐water platform is efficient as a result of the presence of incised submarine channels and the predominance of suspension transport of fine‐grained sediments. Facies of the shallow platform include silty sand with climbing ripple lamination. Offshore facies are dominated by seaward‐fining fine sand to silt tempestites. Sea‐ice scouring and sediment deformation are common beyond 10 m water depth where bioturbated muds are the predominant facies. The low angle profile of the shallow‐water platform is interpreted to be the combined response of a fine‐grained delta to (1) storm sediment dispersal; (2) autoretreat as a result of the increasing subaerial and subaqeous area of deposition as the delta progrades out of its glacial valley; (3) limited water depth above the underlying flooding surface; and (4) efficient nearshore bypassing of sediment through subice channels at the peak of spring discharge. Several indicators of the cold climate can be used as criteria for the interpretation of ancient successions, including thermokarst lake development, submarine channel scours, freeze–thaw deformation and ice‐scour deformation structures. Permafrost inhibits compaction subsidence and, together with the shallow‐water setting, also limits autocyclic lobe switching. The cold climate can thus influence stratal architecture by favouring the development of regional‐scale clinoform sets rather than multiple, smaller scale lobes separated by autocyclic flooding surfaces.  相似文献   

19.
A quantitative, three‐dimensional depositional model of gravelly, braided rivers has been developed based largely on the deposits of the Sagavanirktok River in northern Alaska. These deposits were described using cores, wireline logs, trenches and ground‐penetrating radar profiles. The origin of the deposits was inferred from observations of: (1) channel and bar formation and migration and channel filling, interpreted from aerial photographs; (2) water flow during floods; and (3) the topography and texture of the river bed at low‐flow stage. This depositional model quantitatively represents the geometry of the different scales of strataset, the spatial relationships among them and their sediment texture distribution. Porosity and permeability in the model are related to sediment texture. The geometry of a particular type and scale of strataset is related to the geometry and migration of the bedform type (e.g. ripples, dunes, bedload sheets, bars) associated with deposition of the strataset. In particular, the length‐to‐thickness ratio of stratasets is similar to the wavelength‐to‐height ratio of associated bedforms. Furthermore, the wavelength and height of bedforms such as dunes and bars are related to channel depth and width. Therefore, the thickness of a particular scale of strataset (i.e. medium‐scale cross‐sets and large‐scale sets of inclined strata) will vary with river dimensions. These relationships between the dimensions of stratasets, bedforms and channels mean that this depositional model can be applied to other gravelly fluvial deposits. The depositional model can be used to interpret the origin of ancient gravelly fluvial deposits and to aid in the characterization of gravelly fluvial aquifers and hydrocarbon reservoirs.  相似文献   

20.
This paper documents a subsurface trace fossil and ichnofabric study of the proximal parts of a structurally confined and channelized sand‐rich, lower slope and proximal basin‐floor deep‐marine system in the Middle Eocene Ainsa basin, Spanish Pyrenees. Five depositional environments are recognized based on sedimentary facies associations, depositional architecture and stratigraphic context (channel axis, channel off‐axis, channel margin, leveé‐overbank and interfan), as well as a channel abandonment phase. Each environment is characterized by distinct and recurring ichnofabrics. Ichnological measurements and observations were recorded from six cores recovered from six wells drilled at a spacing of between 400 m and 500 m at outcrop, and totalling 1213 m in length. From channel axis to levée‐overbank environments, there is a trend of increasing bioturbation intensity and ichnodiversity. Ichnofabrics in channel axis and channel off‐axis environments are characterized by low bioturbation intensity and low ichnodiversity. Thalassinoides‐dominated firmground ichnofabrics associated with erosive sediment gravity flows are common in these environments. In contrast, channel margin and levée‐overbank environments are characterized by ichnofabrics associated with high bioturbation intensity and ichnodiversity. Sediments of the interfan are characterized by the highest bioturbation intensity, associated with burrow mottling and an absence of primary sedimentary structures. This paper demonstrates that in core‐based studies, ichnofabric analysis is an important and valuable tool in discriminating between different environments in channelized deep‐marine siliciclastic systems. The results of this study should find wide applicability in reservoir characterization studies in the petroleum industry, in field‐based analogue ichnofabric studies and other core‐based studies in deep‐water siliciclastic systems worldwide such as the Integrated Ocean Drilling Program.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号