共查询到18条相似文献，搜索用时 947 毫秒
1.
由于构造运动等作用,TI介质对称轴往往沿空间任意方向分布,具有任意空间取向对称轴的TI（ATI）介质更符合实际地质情况.VTI介质与ATI介质的相速度在形式上具有一致性,VTI介质中地震波的相角对应ATI介质对称轴与地震波传播方向的夹角.本文基于Tsvankin的VTI介质精确相速度公式,利用TI介质对称轴和地震波传播方向上单位向量的数量积和向量积来计算ATI介质的精确相速度.根据弱各向异性假设,导出qP波和qSV波的近似相速度,分析了近似公式的误差,讨论总结了ATI介质qP波和qSV波的相速度特征.本文中的单位向量采用观测坐标系表示,通过相角关系,可以较为方便地由ATI介质近似相速度导出频散关系,然后借助傅里叶逆变换推导出时间-波数域qP波和qSV波解耦的波动方程.数值算例表明本文的波动方程是qP波和qSV波解耦的,波场计算结果稳定,未出现明显的数值频散,验证了本文方法的有效性. 相似文献
2.
给出了计算多层垂直对称轴横向各向同性（VTI）介质精确射线路径和走时的方法,所用的体波相速度公式、群速度公式和Snell定律都是严格的显式解析公式. 任意基本波的射线路径和走时计算问题都可以转化成一个等效的透射问题,再用文中的公式来计算,具体实现方法用一个多次波和一个首波的实例给出. 最后分别用精确公式和Thomsen近似公式计算了相同模型相同基本波的走时曲线. 比较两者计算结果可发现, 近似公式反复使用会使误差积累,同时揭示了近似公式适用范围的局限性,强调了使用近似公式需要注意其适用范围的重要性. 相似文献
3.
逆时偏移作为一种高精度偏移方法已成为复杂构造成像的重要技术,描述纵波独立传播的延拓方程是各向异性介质逆时偏移的一个关键问题.在对VTI介质几个经典相速度近似公式回顾的基础上,针对常用于描述纯P波的Harlan近似公式在各向异性参数ε较大情况下近似精度较低的问题,本文对Harlan公式中的非椭圆项进行了修正,在非椭圆项前添加了一个与各向异性参数ε有关的修正系数,得到了三种改进型Harlan公式,并以近似精度最高的改进式为基础,推导了TTI介质纯P波方程.针对该伪微分方程,本文利用伪谱法和有限差分法联合实现波场延拓,对于常密度二阶方程,基于中心网格实现;对于一阶应力-速度方程则基于旋转交错网格实现.通过数值试验分析了TTI介质纯P波一阶应力-速度方程的近似精度,并以一阶纯P波方程为基础进行了TTI介质逆时偏移数值模拟试验.结果表明,本文给出的方法能够较准确地描述TTI介质纯P波波场特征,可以应用至各向异性介质逆时偏移. 相似文献
4.
弱各向异性介质中P-SV波弹性阻抗与流体识别因子(英文) 总被引：4，自引：0，他引：4
基于Petr Jilek正交各向异性介质中的P-SV波反射系数精确公式,通过近似得到VTI和HTI介质中的P-SV波近似公式,同时结合Kenneth横波弹性阻抗原理,推导建立了VTI和HTI介质中P-SV波的弹性阻抗近似公式;在此基础上构建了弱各向异性介质中的流体识别因子公式,通过理论模型对Castagna和Smith的岩性组合进行了识别;最后详细分析了各向异性参数的取值对P-SV波弹性阻抗及识别因子产生的影响及变化趋势。 相似文献
5.
从含Thomsen各向异性参数的qP波相速度表示式出发,建立并求解三维VTI介质中的频散方程,得到三维VTI介质中的相移算子,进而将以相移算子为基础的最优分裂Fourier方法推广到三维VTI介质,发展了一个三维VTI介质的深度偏移方法.文中使用的各向异性介质的速度模型与现行的各向异性构造的速度估计方法一致,将各向同性、弱各向异性及强各向异性统一在一个模型中.文中提出的偏移算法对相移法引入了高阶校正项来补偿介质横向变化的影响,使该方法可应用于横向非均匀VTI介质的陡角度成像,文中给出的偏移脉冲响应很好地证明了这一点. 相似文献
6.
具有垂直对称轴的横向各向同性介质模型(VTI)是目前各向异性理论研究和多波多分量地震资料叠前成像处理中最常用的一种各向异性模型.VTI介质中反射 P波时距曲线一般不再是双曲线.基于不同的相速度近似公式会得到不同的时距关系式.文中对几种典型的非双曲时距曲线与射线追踪得到的准确时距曲线在不同各向异性强度下进行了对比，结果表明Muir等和Stovas等提出的非双曲时距公式由于过高地考虑了横波垂直速度的影响与精确的时距曲线有很大偏差；Tsvankin等提出的弱各向异性非双曲时距公式在ε-δ<0时误差增大；Alkhalifah等提出的非双曲时距公式在大炮检距任意各向异性强度下都具有较高的精度，适于在实际资料处理中应用. 相似文献
7.
为克服各向异性介质弹性波数值模拟中存在着计算量大和波场分离困难等局限,研究了声学近似的VTI介质和TTI介质一阶qP波数值模拟方法.首先对VTI介质弹性波方程进行声学近似,推导了VTI介质一阶qP波方程;然后基于精确的TTI介质频散关系,引入一个包含各向异性控制参数σ的新辅助波场,推导了稳定的TTI介质二阶耦合qP波波动方程,并通过引入波场的伪速度分量,推导了等价的一阶应力-速度形式.结合旋转交错网格有限差分(RSGFD)和基于最小二乘优化的有限差分(LS-FD)两种各具优势的方法,研究了最小二乘旋转交错网格有限差分(LS-RSGFD)方法,并用其数值求解VTI和TTI介质一阶qP波方程,然后通过构造其LS-RSGFD格式,实现了高精度的各向异性介质qP波波场数值模拟.数值模拟结果表明:TI介质一阶qP波方程能够准确地模拟各向异性介质中qP波的运动学特征,引入控制参数σ能够有效地减弱不稳定性问题,保证非均匀TTI介质中qP波场的稳定传播;利用优化的LS-RSGFD方法可以得到高精度的合成地震记录,同时还可以相对地提高计算效率. 相似文献
8.
对Christoffel公式进行Bond变换得到EDA介质的Christoffel方程,并由其非零解推导出EDA介质中视横波(qSV)、横波(SH)、视纵波(qP)的相速度、群速度、偏振向量(质点的振动方向)的三维计算公式.通过模型计算分析了具有水平对称轴的各向异性(HTI)介质和EDA介质中介质对称轴的极角和方位角对相速度、群速度及偏振向量的影响,对其随极角、方位角的变化特征进行了分析,并采用Matlab进行了数值计算,对其特征采用三维显示.通过取极角或方位角为零简化得到HTI介质和具有垂直对称轴的各向异性(VTI)介质中地震波的相速度、群速度,对EDA介质中的三维计算结果进行退化验证. 通过数值计算进一步验证了地震波相速度与EDA介质对称轴的相互关系. 结果表明,通过广角地震勘探可探明地下介质的裂隙走向及密度,从而确定灾害体产状. 相似文献
9.
相速度和群速度是研究地震波传播规律和描述介质特性的重要参数,是弹性波传播理论中的核心内容,在理论研究和实际应用中有重要作用.本文根据VTI介质的刚度矩阵,利用Bond变换建立了TTI介质刚度矩阵.再利用TTI介质刚度矩阵,结合弹性动力学的本构方程、牛顿运动微分方程和几何方程,得到了三维TTI介质弹性波波动方程和Christoffel方程.通过本征值方法求解Christoffel方程,推导了三维TTI介质弹性波相速度的解析表达式.利用Berryman和Crampin推导各向异性介质群速度公式,根据三维TTI介质的相速度解析式推导了三维TTI介质群速度解析表达式.数值试例表明,随着各向异性介质参数改变,TI介质弹性波相速度变化较为平缓,群速度变化较为剧烈,qP波和SH波速度变化较为平缓,qSV波速度变化较为剧烈. 相似文献
10.
11.
Pure acoustic wave propagation in transversely isotropic media by the pseudospectral method 总被引：4，自引：0，他引：4
Seismic wave propagation in transversely isotropic (TI) media is commonly described by a set of coupled partial differential equations, derived from the acoustic approximation. These equations produce pure P‐wave responses in elliptically anisotropic media but generate undesired shear‐wave components for more general TI anisotropy. Furthermore, these equations suffer from instabilities when the anisotropy parameter ε is less than δ. One solution to both problems is to use pure acoustic anisotropic wave equations, which can produce pure P‐waves without any shear‐wave contaminations in both elliptical and anelliptical TI media. In this paper, we propose a new pure acoustic transversely isotropic wave equation, which can be conveniently solved using the pseudospectral method. Like most other pure acoustic anisotropic wave equations, our equation involves complicated pseudo‐differential operators in space which are difficult to handle using the finite difference method. The advantage of our equation is that all of its model parameters are separable from the spatial differential and pseudo‐differential operators; therefore, the pseudospectral method can be directly applied. We use phase velocity analysis to show that our equation, expressed in a summation form, can be properly truncated to achieve the desired accuracy according to anisotropy strength. This flexibility allows us to save computational time by choosing the right number of summation terms for a given model. We use numerical examples to demonstrate that this new pure acoustic wave equation can produce highly accurate results, completely free from shear‐wave artefacts. This equation can be straightforwardly generalized to tilted TI media. 相似文献
12.
13.
Based on the pure quasi-P wave equation in transverse isotropic media with a vertical symmetry axis (VTI media), a quasi-P wave equation is obtained in transverse isotropic media with a tilted symmetry axis (TTI media). This is achieved using projection transformation, which rotates the direction vector in the coordinate system of observation toward the direction vector for the coordinate system in which the z-component is parallel to the symmetry axis of the TTI media. The equation has a simple form, is easily calculated, is not influenced by the pseudo-shear wave, and can be calculated reliably when δ is greater than ε. The finite difference method is used to solve the equation. In addition, a perfectly matched layer (PML) absorbing boundary condition is obtained for the equation. Theoretical analysis and numerical simulation results with forward modeling prove that the equation can accurately simulate a quasi-P wave in TTI medium. 相似文献
14.
地震波在各向异性介质中以一个准P波(qP)和两个准S波(qS1和qS2)的形式传播.研究三种波的相速度、群速度以及偏振方向等传播性质能够为各向异性介质中的正反演问题提供有效支撑.具有比横向各向同性(TI)介质更一般对称性的正交各向异性介质通常需要9个独立参数对其进行描述,这使得对传播特征的计算更为复杂.当两个准S波速度相近时具有耦合性,从而令慢度的计算产生奇异性.因此,奇异点(慢度面的鞍点和交叉点)附近的反射与透射(R/T)系数的求解不稳定,会导致波场振幅不准确.本文首次通过结合耦合S波射线理论和基于迭代的各向异性相速度与偏振矢量的高阶近似解,得到了适用于正交各向异性介质以qP波入射所产生的二阶R/T系数的计算方法.与基于一阶近似的结果相比,基于二阶近似的方法提高了qP波R/T系数的精度,能得到一阶耦合近似无法表达的准确的qP-qS转换波的R/T系数解,且方法适用于较强的各向异性介质. 相似文献
15.
Characterizing the expressions of seismic waves in elastic anisotropic media depends on multiparameters. To reduce the complexity, decomposing the P-mode wave from elastic seismic data is an effective way to describe the considerably accurate kinematics with fewer parameters. The acoustic approximation for transversely isotropic media is widely used to obtain P-mode wave by setting the axial S-wave phase velocity to zero. However, the separated pure P-wave of this approach is coupled with undesired S-wave in anisotropic media called S-wave artefacts. To eliminate the S-wave artefacts in acoustic waves for anisotropic media, we set the vertical S-wave phase velocity as a function related to propagation directions. Then, we derive a pure P-wave equation in transversely isotropic media with a horizontal symmetry axis by introducing the expression of vertical S-wave phase velocity. The differential form of new expression for pure P-wave is reduced to second-order by inserting the expression of S-wave phase velocity as an auxiliary operator. The results of numerical simulation examples by finite difference illustrate the stability and accuracy of the derived pure P-wave equation. 相似文献
16.
Modeling and RTM for arbitrary-order pure acoustic wave equation in VTI media using normalized pseudo-analytical method 
下载免费PDF全文
下载免费PDF全文 The conventional pseudo-acoustic wave equations(PWEs) in vertical transversely isotropic(VTI)media may generate SV-wave artifacts and propagation instabilities when anisotropy parameters cannot satisfy the pseudo-acoustic assumption. One solution to these issues is to use pure acoustic anisotropic wave equations, which can produce stable and pure P-wave responses without any SVwave pollutions. The commonly used pure acoustic wave equations(PAWEs) in VTI media are mainly derived from the decoupled P-SV dispersion relation based on first-order Taylor-series expansion(TE), thus they will suffer from accuracy loss in strongly anisotropic media. In this paper, we adopt arbitrary-order TE to expand the square root term in Alkhalifah's accurate acoustic VTI dispersion relation and solve the corresponding PAWE using the normalized pseudoanalytical method(NPAM) based on optimized pseudodifferential operator. Our analysis of phase velocity errors indicates that the accuracy of our new expression is perfectly acceptable for majority anisotropy parameters. The effectiveness of our proposed scheme also can be demonstrated by several numerical examples and reverse-time migration(RTM) result. 相似文献
17.
Anisotropic reverse-time migration for tilted TI media 总被引：1，自引：0，他引：1
Seismic anisotropy in dipping shales results in imaging and positioning problems for underlying structures. We develop an anisotropic reverse‐time depth migration approach for P‐wave and SV‐wave seismic data in transversely isotropic (TI) media with a tilted axis of symmetry normal to bedding. Based on an accurate phase velocity formula and dispersion relationships for weak anisotropy, we derive the wave equation for P‐wave and SV‐wave propagation in tilted transversely isotropic (TTI) media. The accuracy of the P‐wave equation and the SV‐wave equation is analyzed and compared with other acoustic wave equations for TTI media. Using this analysis and the pseudo‐spectral method, we apply reverse‐time migration to numerical and physical‐model data. According to the comparison between the isotropic and anisotropic migration results, the anisotropic reverse‐time depth migration offers significant improvements in positioning and reflector continuity over those obtained using isotropic algorithms. 相似文献