首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Faults on the outer wall of the northern Peru—Chile trench, seaward of the Lima Basin, Arica Bight, and Iquique Basin, parallel the trend of Nazca plate magnetic anomalies. Where the Nazca Ridge enters the subduction zone, faulting parallels the trench, probably reflecting a lack of spreading fabric on the ridge. Seaward of the Yaquina Basin, faulting does not parallel the trench or the spreading fabric, possibly reflecting stress changes caused by N—S extension across the nearby Mendaña fracture zone. These results generally agree with a previous review of subduction-related faulting, which concluded that faults parallel the spreading fabric where it differs from the strike of the dipping slab by less than 30°.  相似文献   

2.
通过对比实际观测与弹塑性变形模型,研究了沿着汤加、日本、伊豆-小笠原、马里亚纳海沟的板块挠曲与正断层特征。观测表明,平均海沟挠曲量在日本海沟最小（3公里）,马里亚纳海沟最大（4.9公里）,而平均正断层垂直断距在日本海沟最小（113米）,汤加海沟最大（284米）。模拟了俯冲板块在三种构造加载的作用下发生弯曲变形并产生正断层的过程：垂向加载（V0）、弯矩（M0）和水平拉张力（F0）。在板块挠曲与正断层特征的双重约束下,反演得到了四个海沟的最佳模型解。结果显示,日本海沟的水平张力分别比马里亚纳、汤加和伊豆-小笠原海沟小33%、50%和60%。汤加、日本、伊豆-小笠原、马里亚纳海沟的正断层最深可达海底以下29,23,32和32公里,这与重新定位后的日本与伊豆-小笠原地震深度一致。此外,反演得到的水平张拉力与观测到的平均垂直断距呈一定正相关性,而计算得到的有效弹性厚度减少量与观测到的海沟挠曲量也相关。这些结果表明,水平张拉力在正断层发展过程中起着关键控制作用,板块弱化可导致板块挠曲量的显著增加。  相似文献   

3.
The Geodynz-sud cruise on board the R/V l'Atalante collected bathymetric, side-scan sonar and seismic reflection data along the obliquely convergent boundary between the Australian and Pacific plates southwest of the South Island, New Zealand. The survey area extended from 44°05 S to 49°40 S, covering the transition zone between the offshore extension of the Alpine Fault and the Puysegur Trench and Puysegur Ridge. Based on variations in the nature and structure of the crust on either side of the margin, the plate boundary zone can be divided into three domains with distinctive structural and sedimentary characteristics. The northern domain involves subduction of probably thinned continental crust of the southern Challenger Plateau beneath the continental crust of Fiordland. It is characterized by thick sediments on the downgoing slab and a steep continental slope disrupted by fault scarps and canyons. The middle domain marks the transition between subduction of likely continental and oceanic crust defined by a series of en echelon ridges on the downgoing slab. This domain is characterized by a large collapse terrace on the continental slope which appears to be due to the collision of the en echelon ridges with the plate margin. The southern domain involves subduction of oceanic crust beneath continental and oceanic crust. This domain is characterized by exposed fabric of seafloor spreading on the downgoing slab, a steep inner trench wall and linear ridges and valleys on the Puysegur ridge crest. The data collected on this cruise provide insights into the nature and history of both plates, and factors influencing the distribution of strike-slip and compressive strain and the evolution of subduction processes along a highly oblique convergent margin.  相似文献   

4.
Morphology and tectonics of the Yap Trench   总被引：5，自引：0，他引：5  
We conducted swath bathymetry and gravity surveys the whole-length of the Yap Trench, lying on the southeastern boundary of the Philippine Sea Plate. These surveys provided a detailed morphology and substantial insight into the tectonics of this area subsequent the Caroline Ridge colliding with this trench. Horst and graben structures and other indications of normal faulting were observed in the sea-ward trench seafloor, suggesting bending of the subducting oceanic plate. Major two slope breaks were commonly observed in the arc-ward trench slope. The origin of these slope breaks is thought to be thrust faults and lithological boundaries. No flat lying layered sediments were found in the trench axis. These morphological characteristics suggest that the trench is tectonically active and that subduction is presently occurring. Negative peaks of Bouguer anomalies were observed over the arc-ward trench slope. This indicates that the crust is thickest beneath the arc-ward trench slope because the crustal layers on the convergent two plates overlap. Bouguer gravity anomalies over the northern portion of the Yap Arc are positive. These gravity signals show that the Yap Arc is uplifted by dynamic force, even though dense crustal layers underlie the arc. This overlying high density arc possibly forces the trench to have great water depths of nearly 9000 m. We propose a tectonic evolution of the trench. Subduction along the Yap Trench has continued with very slow rates of convergence, although the cessation of volcanism at the Yap Arc was contemporaneous with collision of the Caroline Ridge. The Yap Trench migrated westward with respect to the Philippine Sea Plate after collision, then consumption of the volcanic arc crust occurred, caused by tectonic erosion, and the distance between the arc and the trench consequently narrowed. Lower crustal sections of the Philippine Sea Plate were exposed on the arc-ward trench slope by overthrusting. Intense shearing caused deformation of the accumulated rocks, resulting in their metamorphism in the Yap Arc.  相似文献   

5.
Using a mega-regional dataset that includes over 20,000 km of on- and offshore 2D seismic lines and 12 wells, we illustrate three different stages of fault formation and basin evolution in the Caribbean arc-South American continent collisional zone. Transpressional deformation associated with oblique collision of the Caribbean arc migrates diachronously over a distance of ∼1500 km from western Venezuela in Paleogene time (∼57 Ma) to a zone of active deformation in the eastern offshore Trinidad area. Each diachronous stage of pre-, syn-, and post-collisional basin formation is accompanied by distinct patterns of fault families. We use subsidence histories from wells to link patterns of long-term basinal subsidence to periods of activity of the fault families.

Stage one of arc-continent collision

Initial collision is characterized by overthrusting of the south- and southeastward-facing Caribbean arc and forearc terranes onto the northward-subducting Mesozoic passive margin of northern South America. Northward flexure of the South American craton produces a foreland basin between the thrust front and the downward-flexed continental crust that is initially filled by clastic sediments shed both from the colliding arc and cratonic areas to the south. As the collision extends eastward towards Trinidad, this same process continues with progressively younger foreland basins formed to the east. On the overthrusting Caribbean arc and forearc terranes, north-south rifting adjacent to the collision zone initiates and is controlled by forward momentum of southward-thrusting arc terranes combined with slab pull of the underlying and subducting, north-dipping South American slab. Uplift of fold-thrust belts arc-continent suture induces rerouting of large continental drainages parallel to the collisional zone and to the axis of the foreland basins.

Stage two

This late stage of arc-continent collision is characterized by termination of deformation in one segment of the fold-thrust belt as convergent deformation shifts eastward. Rebound of the collisional belt is produced as the north-dipping subducted oceanic crust breaks off from the passive margin, inducing inversion of preexisting normal faults as arc-continent convergence reaches a maximum. Strain partitioning also begins to play an important role as oblique convergence continues, accommodating deformation by the formation of parallel, strike-slip fault zones and backthrusting (southward subduction of the Caribbean plate beneath the South Caribbean deformed belt). As subsidence slows in the foreland basins, sedimentation transitions from a marine underfilled basin to an overfilled continental basin. Offshore, sedimentation is mostly marine, sourced by the collided Caribbean terranes, localized islands and carbonate deposition.

Stage three

This final stage of arc-continent collision is characterized by: 1) complete slab breakoff of the northward-dipping South American slab; 2) east-west extension of the Caribbean arc as it elongates parallel to its strike forming oblique normal faults that produce deep rift and half-grabens; 3) continued strain partitioning (strike-slip faulting and folding). The subsidence pattern in the Caribbean basins is more complex than interpreted before, showing a succession of extensional and inversion events. The three tectonic stages closely control the structural styles and traps, source rock distribution, and stratigraphic traps for the abundant hydrocarbon resources of the on- and offshore areas of Venezuela and Trinidad.  相似文献   

6.
Bathymetry of the Tonga Trench and Forearc: a map series   总被引：1，自引：0，他引：1  
Four new bathymetric maps of the Tonga Trench and forearc between 14 °S and 27 °S display the important morphologic and structural features of this dynamic convergent margin. The maps document a number of important geologic features of the margin. Major normal faults and fault lineaments on the Tonga platform can be traced along and across the upper trench slope. Numerous submarine canyons incised in the landward slope of the trench mark the pathways of sediment transport from the platform to mid- and lower-slope basins. Discontinuities in the trench axis and changes in the morphology of the landward slope can be clearly documented and may be associated with the passage and subduction of the Louisville Ridge and other structures on the subducting Pacific Plate. Changes in the morphology of the forearc as convergence changes from normal in the south to highly-oblique in the north are clearly documented. The bathymetric compilations, gridded at 500- and 200-m resolutions and extending along 500 km of the landward trench slope and axis, provide complete coverage of the outer forearc from the latitude of the Louisville Ridge-Tonga Trench collision to the northern terminus of the Tonga Ridge. These maps should serve as a valuable reference for other sea-going programs in the region, particularly the Ocean Drilling Program (ODP) and the National Science Foundation MARGINS initiative.  相似文献   

7.
Swath bathymetric, sonar imagery and seismic reflection data collected during the SOPACMAPS cruise Leg 3 over segments of the Vitiaz Trench Lineament and adjacent areas provide new insights on the geometry and the stuctural evolution of this seismically inactive lineament. The Vitiaz Trench Lineament, although largely unknown, is one of the most important tectonic feature in the SW Pacific because it separates the Cretaceous crust of the Pacific Plate to the north from the Cenozoic lithosphere of the North Fiji and Lau Basins to the south. The lineament is considered to be the convergent plate boundary between the Pacific and Australian Plates during midde to late Tertiary time when the Vitiaz Arc was a continuous east-facing are from the Tonga to the Solomon Islands before the development of the North Fiji and Lau Basins. Progressive reversal and cessation of subduction from west to east in the Late Miocene-Lower Plioene have been also proposed. However, precise structures and age of initiation and cessation of deformation along the Vitiaz Trench Lineament are unknown.The lineament consists of the Vitiaz Trench and three discontinuous and elongated troughs (Alexa, Rotuma and Horne Troughs) which connect the Vitiaz Trench to the northern end of the Tonga Trench. Our survey of the Alexa and Rotuma Troughs reveals that the lineament is composed of a series of WNW-ESE and ENE-WSW trending segments in front of large volcanic massifs belonging to the Melanesian Border Plateau, a WNW trending volcanic belt of seamounts and ridges on Pacific crust. The Plateau and Pacific plate lying immediately north of the lineament have been affected by intense normal faulting, collapse, and volcanism as evidenced by a series of tilted blocks, grabens, horsts and ridges trending N 120° to N100° and N60°–70°. This tectonism includes several normal faulting episodes, the latest being very recent and possibly still active. The trend of the fault scarps and volcanic ridges parallels the different segments of the Vitiaz Trench Lineament, suggesting that tectonics and volcanism are related to crustal motion along the lineament.Although the superficial observed features are mainly extensional, they are interpreted as the result of shortening along the Vitiaz Trench Lineament. The fabric north of the lineament would result from subduction-induced normal faulting on the outer wall of the trench and the zig-zag geometry of the Vitiaz Trench Lineament might be due to collision of large volcanic edifices of the Melanesian Border Plateau with the trench, provoking trench segmentation along left-lateral ENE-WSW trending transform zones. The newly acquired bathymetric and seismic data suggest that crustal motion (tectonism associated with volcanism) continued up to recent times along the Vitiaz Trench Lineament and was active during the development of the North Fiji Basin.  相似文献   

8.
A 1987 survey of the offshore Peru forearc using the SeaMARC II seafloor mapping system reveals that subduction of the Nazca Ridge has resulted in uplift of the lowermost forearc by as much as 1500 m. This uplift is seen in the varied depths of two forearc terraces opposite the subducting ridge. Uplift of the forearc has caused fracturing, minor surficial slumping, and increased erosion through small canyons and gullies. Oblique trending linear features on the forearc may be faults with a strike-slip component of motion caused by the oblique subduction of the Nazca Ridge. The trench in the zone of ridge subduction is nearly linear, with no re-entrant in the forearc due to subduction of the Nazca Ridge. Compressional deformation of the forearc due to subduction of the ridge is relatively minor, suggesting that the gently sloping Nazca Ridge is able to slide beneath the forearc without significantly deforming it. The structure of the forearc is similar to that revealed by other SeaMARC II surveys to the north, consisting of: 1) a narrow zone (10 to 15 km across) of accreted material making up the lower forearc; 2) a chaotic middle forearc; 3) outcropping consolidated material and draping sediment on the upper forearc; and 4) the smooth, sedimented forearc shelf.The subducting Nazca plate and the Nazca Ridge are fractured by subduction-induced faults with offsets of up to 500 m. Normal faulting is dominant and begins about 50 km from the trench axis, increasing in frequency and offset toward the trench. These faults are predominantly trench-parallel. Reverse faults become more common in the deepest portion of the trench and often form at slight angles to the trench axis.Intrusive and extrusive volcanic areas on the Nazca plate appear to have formed well after the seafloor was created at the ridge crest. Many of the areas show evidence of current scour and are cut by faulting, however, indicating that they formed before the seafloor entered the zone of subduction-induced faulting.  相似文献   

9.
Data from three bathymetric surveys by R/V Kairei using a 12-kHz multibeam echosounder and differential GPS were used to create an improved topographic model of the Challenger Deep in the southwestern part of the Mariana Trench, which is known as the deepest seafloor in the world. The strike of most of the elongated structures related to plate bending accompanied by subduction of the Pacific plate is N70°E and is not parallel to the trench axis. The bending-related structures were formed by reactivation of seafloor spreading fabric. Challenger Deep consists of three en echelon depressions along the trench axis, each of which is 6–10 km long, about 2 km wide, and deeper than 10,850 m. The eastern depression is the deepest, with a depth of 10,920 ± 5 m.  相似文献   

10.
侏罗纪洋壳为现存最古老的海洋地壳, 残留在地球表面上很少, 目前对于侏罗纪洋壳的断裂特征和构造变形了解很少。本文利用高分辨率的反射地震剖面精细解释了位于西太平洋的侏罗纪洋壳基底、沉积地层和断裂结构, 发现在研究区存在基底断层、沉积断层和垮塌断层三种类型的断裂构造, 并对其走向、倾角、断距等几何参数与变形特征进行了推测和定量研究。研究还发现, 基底断层是洋壳受到板块伸展拉张而产生的, 在后期海底沉积过程中持续发育并错断上覆沉积物, 在海底形成明显的断层陡坎。沉积断层是沉积地层自身重力作用的产物,受到沉积地层岩石性质的控制。垮塌断层是岩浆侵出或者侵入形成海山, 导致洋壳及其上覆沉积局部抬升并向两侧推移, 引起先存的基底断层和沉积断层重新错动产生的。研究区内切断洋壳基底和上覆沉积的活动断层的推测走向大体符合侏罗纪洋壳基底面起伏、重力异常骤变界面以及地磁异常条带等的走向, 表明这些断裂从侏罗纪洋中脊的海底扩张中演变而来, 并且持续活动至今。这些发育在古老洋壳上的断层能够长时间让水进入岩石圈并进入俯冲带及地球内部, 从而促进地球水循环。尽管目前尚未发现这些断裂产生大地震, 但这些断层可能随着板块俯冲而演变成俯冲带地震大断裂, 今后研究应该关注这类断层在靠近海沟之前的演化规律和潜在地震风险。  相似文献   

11.
Multichannel seismic reflection profiles across the Sunda Trench slope off central Sumatra reveal details of subduction zone structure. Normal faults formed on the outer ridge of the trench offset deep strate and the oceanic crust, but die out upsection under the trench sediments. At the base of the inner trench slope, shallow reflectors are tilted seaward, while deeper reflectors dip landward parallel to the underlying oceanic crustal reflector. Intermediate depth reflectors can be traced landward through a seaward-dipping monocline. We interpret this fold as the shallow expression of a landward-dipping thrust fault at depth. Landward of this flexure, relatively undeformed strata have been stripped off the oceanic plate, uplifted 700 meters, and accreted to the base of the slope. The oceanic crust is not involved in the deformation at the toe of the slope, and it can be observed dipping landward about 25 km under the toe of the accretionary prism.The middle portion of the trench slope is underlain by deformed accreted strata. Shallow reflectors define anticlinal structures, but coherent deep reflectors are lacking. Reflectors 45 to 55 km landward of the base of the slope dip 4°-5° landward beneath a steep slope, suggesting structural imbrication.A significant sediment apron is absent from the trench slope. Instead, slope basins are developed in 375–1500 m water depths, with an especially large one at about 1500 m water depth that is filled with more than 1.1 seconds of relatively undeformed sediments. The seaward flank of the basin has recently been uplifted, as indicated by shallow landward-dipping reflectors. Earlier periods of uplift also appear to have coincided with sedimentation in this basin, as indicated by numerous angular unconformities in the basin strata.Contribution of the Scripps Institution of Oceanography, new series.  相似文献   

12.
The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series.  相似文献   

13.
Since the beginning of formation of Proto-Taiwan, the subducting Philippine (PH) Sea plate has moved continuously through time in the N307° direction with respect to Eurasia (EU), tearing the EU plate. The subducting EU plate includes a continental part in the north and an oceanic part in the south. The boundary B between these two domains corresponds to the eastern prolongation of the northeastern South China Sea ocean-continent transition zone. In the Huatung Basin (east of Taiwan), the Taitung Canyon is N065° oriented and is close and parallel to B. Seismic profiles show that the southern flank of the canyon corresponds to a fault with a normal component of a few tens of meters in the sediments and possible dextral shearing. Several crustal earthquakes of magnitude >%6 are located beneath the trend of the Taitung Canyon and focal mechanisms suggest that the motion is right-lateral. Thus, faulting within the sedimentary sequence beneath the Taitung Canyon is a consequence of underlying dextral strike-slip crustal motions. As the continental part of the EU slab located north of B has been recently detached, some subsequent dextral strike-slip motion might be expected within the EU slab, along the ocean-continent transition zone, which is a potential zone of weakness. We suggest that the dextral strike-slip motion along the ocean-continent boundary of the EU slab might trigger the observed dextral strike-slip motion within the overlying PH Sea crust and the associated faulting within the sediments of the Huatung Basin, beneath the Taitung Canyon. An erratum to this article is available at .  相似文献   

14.
We investigated the deformation in the accretionary wedge associated with subducted seamounts in the northern Manila Trench by combining observations from seismic profiles and results from laboratory sandbox experiments. From three seismic reflection profiles oriented approximately perpendicular to the trench, we observed apparent variations in structural deformation along the trench. A number of back-thrust faults were formed in the accretionary wedge where subducted seamounts were identified. In contrast, observable back-thrusts were quite rare along the profile without seamounts, indicating that seamount subduction played an important role in deformation of the accretionary wedge. We then conducted laboratory sandbox experiments to investigate the effects of subducted seamounts on the structural deformation of the accretionary wedge. From the analog modeling results we found that seamount subduction could cause well-developed back-thrusts, gravitational collapse, and micro-fractures in the wedge. We also found that a seamount may induce normal faults in the wedge and that normal faults may be eroded by subsequent seamount subduction. In addition, we constrained the crustal structure of the South China Sea plate from modeling free-air gravity data. The dip angle of the subducting plate, which was constrained by hypocenters of available earthquakes, increased from south to north in the northern Manila Trench. We found a laterally heterogeneous density distribution of the oceanic crust according to the gravity data. The density of subducted crust is ~2.92 g/cm3, larger than that of the South China Sea crust (2.88 g/cm3).  相似文献   

15.
Machias Seamount, located at 14°57′S, 172°14′W about 140 km south of Savaii, Western Samoa, rises to less than 700 m depth. This guyot is situated on the NE (seaward) flank of the Tonga Trench where depths reach 7,700 m. A SeaMARC II bathymetric and side-scan sonar survey shows that faults aligned parallel to the local strike of the Tonga Trench dissect the trench-facing half of the guyot. Faulting is largely confined to the interval within 35 km of the trench axis. Faults are absent and sediment flows are radially distributed on the NE-facing flank of the guyot. Sediment flow is pervasive on the trench-facing (SW) slope, but the pattern is not radial because the neo-tectonic fabric controls resedimentation.  相似文献   

16.
We conducted a detailed analysis of along-trench variations in the flexural bending of the subducting Pacific Plate at the Tonga-Kermadec Trench. Inversions were conducted to obtain best-fitting solutions of trench-axis loadings and variations in the effective elastic plate thickness for the analyzed flexural bending profiles. Results of the analyses revealed significant along-trench variations in plate flexural bending: the trench relief(W_0) of 1.9 to 5.1 km;trench-axis vertical loading(V_0) of –0.5×(10)~(12) to 2.2×(10)~(12) N/m; axial bending moment(M_0) of 0.1×(10)~(17) to 2.2×(10)~(17) N;effective elastic plate thickness seaward of the outer-rise region(T_e~M) of 20 to 65 km, trench-ward of the outer-rise(T_e~m) of 11 to 33 km, and the transition distance(X_r) of 20 to 95 km. The Horizon Deep, the second greatest trench depth in the world, has the greatest trench relief(W_0 of 5.1 km) and trench-axis loading(V_0 of 2.2×(10)~(12) N/m); these values are only slightly smaller than that of the Challenger Deep(W_0 of 5.7 km and V_0 of 2.9×(10)~(12) N/m) and similar to that of the Sirena Deep(W_0 of 5.2 km and V_0 of 2.0×(10)~(12) N/m) of the Mariana Trench,suggesting that these deeps are linked to great flexural bending of the subducting plates. Analyses using three independent methods, i.e., the T_e~M/T_e~m inversion, the flexural curvature/yield strength envelope analysis, and the elasto-plastic bending model with normal faults, all yielded similar average Te reduction of 28%–36% and average Te reduction area S￠Te of 1 195–1 402 km~2 near the trench axis. The calculated brittle yield zone depth from the flexural curvature/yield strength envelope analysis is also consistent with the distribution of the observed normal faulting earthquakes. Comparisons of the Manila, Philippine, Tonga-Kermadec, Japan, and Mariana Trenches revealed that the average values of T_e~M and T_e~m both in general increase with the subducting plate age.  相似文献   

17.
活动大陆边缘的板片窗构造   总被引：7，自引：0，他引：7  
正俯冲的洋中脊的持续扩张作用将会使该洋中脊两侧的洋壳板片之间形成一个持续加宽的间隙,这个间隙称为板片窗。板片窗往往形成于小于10Ma左右具浮力的大洋岩石圈俯冲时期。板片窗形态依赖于3个主要因素：板块的相对运动、俯冲前的洋脊一转换断层组合样式、俯冲角度。影响板片窗形态的次要因素还有热侵蚀、相变等因素。在板片窗出现的活动大陆边缘,软流圈、岩石圈、大气圈、水圈发生独特的多圈层相互作用,是地球系统最为活跃的地带。由于该地带的洋底消减往往与生长轴呈一定角度相交,不仅引起盆地的不对称消减,而且使得板片窗之上的活动大陆边缘的构造、岩浆、成矿和热效应明显不同于洋中脊平行于俯冲带的消减作用产生的构造、岩浆、成矿和热效应。  相似文献   

18.
Five expeditions (1965–1970) across parts of the Aleutian Abyssal Plain and adjacent areas in the Gulf of Alaska, and results of the Deep Sea Drilling Project, provide new information for the geologic history of the region which forms restrictive limits on models of plate tectonics. In general: (1) the Eocene-Oligocene, turbidite Aleutian Abyssal Plain was deposited from channelized turbidity currents from the north or northeast; (2) the plain is bounded on the south by the northern ridges of the Surveyor Fracture Zone, and is isolated from the Tufts Abyssal Plain; (3) turbidites were deposited from many buried channels and smaller surficial channels, but mainly from four great channels: Seamap, Sagittarius, Aquarius, and Taurus.The channels are depositional features; accumulation of sediments causes the channels to lie, topographically, along low ridges, with channels above distal portions of their levees. Western levees are higher and broader than eastern levees. Levee heights decrease from 30–100 m in the north to 15–25 m in the south.Rates of deposition and thicknesses of pelagic sediments in the northwest are 3 to 4 times greater than in the southeast. The data indicate the pelagics were deposited near the margin of the Pacific, at or near present locations. Thus, little or no northward plate motion is indicated.Turbidite thicknesses decrease from about 400–800 m in the north to about 200 m in the south. Turbidite thicknesses in the east-central plain are greater than in the Alaskan Abyssal Plain (formed since the Miocene), the northern Tufts Abyssal Plain, or the Sohm Abyssal Plain in the North Atlantic.Faulting and flexure of the oceanic crust seaward of the Aleutian Trench have strongly affected the channels. Seamap Channel has its high point midway along its course. The other three major channels are uplifted and faulted in the north.Required volumes of off-scraped sediments, undisturbed turbidites in the Aleutian Trench floor, and paleoclimatology also argue for little northward plate movement.The total evidence indicates that the turbidite Aleutian Abyssal Plain was formed in the Eocene-Oliogocene at, or near, its present position, and that the sediment source was probably Alaska. Cretaceous flysch of the Alaska Peninsula continental terrace was a possible source.The evidence does not require, but does not exclude, plate tectonics hypotheses. The evidence apparently excludes those continuous spreading models which cannot explain deposition of an Eocene-Oligocene turbidite plain over the magnetic bight, or which require an active, subducting, paleogene Aleutian Trench. Plate movements to the north over small distances cannot be excluded. The evidence is consistent with concepts of discontinuous sea-floor spreading with episodic subduction, or discontinuous, relative plate motion in this area. Two models are outlined which are consistent with the regional evidence: (1) a model with discontinuous relative plate motion and episodic subduction (a variation of one published by Hayes and Pitman, 1970); or (2) a no-plate-motion, or very-little-motion, model with long periods of inter-plate inactivity without subduction.  相似文献   

19.
Transform faults in back-arc basins are the key to revealing the opening and development of marginal seas. The Okinawa Trough (OT) represents an incipient and active back-arc or marginal sea basin oriented in a general NE-SW direction. To determine the strikes and spatial distribution of transform faults in the OT, this paper dissects the NW- and NNE-SN-trending fault patterns on the basis of seismic profiles, gravity anomalies and region geological data. There are three main NW-trending transpressional faults in the OT, which are the seaward propagation of NW-trending faults in the East China Continent. The NNE-SN-trending faults with right-stepping distribution behave as right-lateral shearing. The strike-slip pull-apart process or transtensional faulting triggered the back-arc rifting or extension, and these faults evolved into transform faults with the emergence of oceanic crust. Thus, the transform fault patterns are inherited from pre-existing oblique transtensional faults at the offsets between rifting segments. Therefore, the OT performs the oblique spreading mechanism similar to nascent oceans such as the Red Sea and Gulf of Aden.  相似文献   

20.
In the 300 km wide Adak-Amlia sector of the central Aleutian Trench ≈ 36 000 km3 of offscraped trench fill makes up the wedge-shaped mass of the Aleutian accretionary body. Within this wedge, seismic reflection profiles reveal an abundance of potential hydrocarbon-trapping structures. These structures include antiforms, thrust and normal faults, and stratigraphic pinchouts. Maximum closure on these features is 2 km. In addition, the silt and possibly sand size sediment within the offscraped turbidite deposits, and the porous diatomaceous pelagic deposits interbedded with and at the base of the wedge, may define suitable reservoirs for the entrapment of hydrocarbons. Potential seals for these reservoirs include diagenetically-altered and -produced siliceous and carbonate sediment. The organic carbon input into the central Aleutian Trench, based on carbon analyses of DSDP Legs 18 and 19 core samples, suggests that the average organic carbon content within the accretionary body is approximately 0.3–0.6%. Heat flow across the Aleutian Terrace indicates that at present the oil generation window lies at a depth of 3–6.5 km. At depths of 8 km (which corresponds to the maximum depth the offscraped sediment has been seismically resolved beneath the lower trench slope), the probable high (170–180°C) temperatures prohibit all but gas generation. The dewatering of trench sediment and subducted oceanic crust should produce an abundance of fluids circulating within the accretionary body. These fluids and gases can conduct hydrocarbons to any of the abundant trapping geometries or be lost from the system through sea floor seepage. In the Aleutian accretionary body all the conditions necessary for the formation of oil and gas deposits exist. The size and ultimate preservation of these deposits, however, are dependent on the deformational history of the prism both during accretion and after the accretion process has been superceded by subsequent tectonic regimes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号