共查询到20条相似文献，搜索用时 31 毫秒
1.
性能化抗震是工程抗震研究的重要方向。根据位移性能水准,计算不同周期结构达到性能水准时所需输入的最大地震动加速度值,建立性态谱;基于性态谱,研究自振周期、恢复力模型和第二刚度折减系数等特征参数对性态谱的影响。研究表明:性态谱表征了周期、性能水准和地震需求的三维谱关系,可预测达到不同性能水准时结构的地震需求;结构自振周期和第二刚度折减系数在短周期段对性态谱有显著影响,随结构自振周期的增大,谱值差别减小;双线型恢复力模型是否退化影响达到相同变形目标时的地震需求,退化模型性态谱谱值小于非退化模型。 相似文献
2.
It is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high-strength elastic materials, such as fiber-reinforced polymer (FRP) and high-strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high-strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic-perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree-of-freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R-μp-T-α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures. 相似文献
3.
During strong ground motions, structural members made of reinforced concrete undergo cyclic deformations and experience permanent damage. Members may lose their initial stiffness as well as strength. Recently, Los Alamos National Laboratory has performed experiments on scale models of shear wall structures subjected to recorded earthquake signals. In general, the results indicated that the measured structural stiffnesses decreased with increased levels of excitation in the linear response region. Furthermore, a significant reduction in strength as well as in stiffness is also observed in the inelastic range. Since the in-structure floor response spectra which are used to design and qualify safety equipment have been based on calculated structural stiffness and frequencies, it is possible that certain safety equipment could experience greater seismic loads than were specified for qualification due to stiffness reduction.In this research, a hysteresis model based on the concept of accumulated damage has been developed to account for this stiffness degradation both in the linear and inelastic ranges. Single and three-degrees-of-freedom seismic Category I structures were analysed and compared with equivalent linear stiffness degradation models in terms of maximum displacement responses, permanent displacement, and floor response spectra. The results indicate significant differences in response between the hysteresis model and equivalent linear stiffness degradation model at PGA levels of greater than 0.8 g. The hysteresis model is used in the analysis of reinforced concrete shear-wall structures to obtain the in-structure response spectra. Results of both cumulative and one shot tests are compared. 相似文献
4.
Reinforced concrete (RC) structural walls with openings are the primary lateral‐load‐carrying elements utilized in many structures designed to resist earthquakes. A review of the technical literature shows that there is a considerable amount of uncertainty with regards to the elastic stiffness of these structures when subjected to seismic excitations. Current design practices often employ a stiffness reduction factor to deal with this uncertainty. In an attempt to develop additional information regarding the stiffness of these structures, this paper discusses an approach to determine the initial stiffness of RC structural walls with irregular openings and low aspect ratios. This approach would consider the effect of both flexural and shear deformations. As a part of this study, an analytical approach to determine stiffness was also developed and validated by comparing theoretical and experimental results obtained from six RC shear walls with irregular openings. Simple equations for assessing initial stiffness of RC structural walls with irregular openings are then proposed, based on these parametric case studies. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
5.
Numerical simulations of a highway bridge structure employing passive negative stiffness device for seismic protection 
下载免费PDF全文
下载免费PDF全文 Navid Attary Michael Symans Satish Nagarajaiah Andrei M. Reinhorn Michael C. Constantinou Apostolos A. Sarlis Dharma T. R. Pasala Douglas Taylor 《地震工程与结构动力学》2015,44(6):973-995
A new passive seismic response control device has been developed, fabricated, and tested by the authors and shown to be capable of producing negative stiffness via a purely mechanical mechanism, thus representing a new generation of seismic protection devices. Although the concept of negative stiffness may appear to be a reversal on the desired relationship between the force and displacement in structures (the desired relationship being that the product of restoring force and displacement is nonnegative), when implemented in parallel with a structure having positive stiffness, the combined system appears to have substantially reduced stiffness while remaining stable. Thus, there is an ‘apparent weakening and softening’ of the structure that results in reduced forces and increased displacements (where the weakening and softening is of a non‐damaging nature in that it occurs in a seismic protection device rather than within the structural framing system). Any excessive displacement response can then be limited by incorporating a damping device in parallel with the negative stiffness device. The combination of negative stiffness and passive damping provides a large degree of control over the expected performance of the structure. In this paper, a numerical study is presented on the performance of a seismically isolated highway bridge model that is subjected to various strong earthquake ground motions. The Negative Stiffness Devices (NSDs) are described along with their hysteretic behavior as obtained from a series of cyclic tests wherein the tests were conducted using a modified design of the NSDs (modified for testing within the bridge model). Using the results from the cyclic tests, numerical simulations of the seismic response of the isolated bridge model were conducted for various configurations (with/without negative stiffness devices and/or viscous dampers). The results demonstrate that the addition of negative stiffness devices reduces the base shear substantially, while the deck displacement is limited to acceptable values. This assessment was conducted as part of a NEES (Network for Earthquake Engineering Simulation) project which included shaking table tests of a quarter‐scale highway bridge model. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
6.
7.
8.
Earthquake simulator tests of a 1/6-scale nine-story reinforced concrete frame-wall model are described in the paper. The test results and associated numerical simulation are summarized and discussed. Based on the test data, a relationship between maximum inter-story drift and damage state is established. Equations of variation of structural characteristics (natural frequency and equivalent stiffness) with overall drifts are derived by data fitting, which can be used to estimate structural damage state if structural characteristics can be measured. A comparison of the analytical and experimental results show that both the commonly used equivalent beam and fiber element models can simulate the nonlinear seismic response of structures very well. Finally, conclusions associated with seismic design and damage evaluation of RC structures are presented. 相似文献
9.
为探讨村镇建筑低层砌体结构在大震下的动力响应及损伤分布情况,基于农居结构性能实地调查与检测,在有限元软件ABAQUS中建立了不同抗震构造措施的砌体结构有限元模型,并进行结构动力特性及大震下弹塑性时程的分析,对比它们的自振特性参数、位移响应参数及损伤破坏形态。分析表明,低层砌体结构合理设置构造柱后结构自振周期略有减小,但振型不变;在弹性变形阶段构造柱能有效约束结构的动力位移响应,进入塑性变形后构造柱可提高砌体结构的耗能能力,但值得注意的是,结构刚度退化后构造柱会加剧纵横向抗侧刚度的不均衡性;低层砌体结构合理设置圈梁构造柱可有效抑制承重横墙的裂缝发展及楼屋盖发生支座失效破坏,且可以明显削弱结构的扭转效应。 相似文献
10.
Alessandro Martelli 《Pure and Applied Geophysics》2011,168(1-2):217-235
Based on the experience of recent violent earthquakes, the limits of the methods that are currently used for the definition of seismic hazard are becoming more and more evident to several seismic engineers. Considerable improvement is felt necessary not only for the seismic classification of the territory (for which the probabilistic seismic hazard assessment??PSHA??is generally adopted at present), but also for the evaluation of local amplification. With regard to the first item, among others, a better knowledge of fault extension and near-fault effects is judged essential. The aforesaid improvements are particularly important for the design of seismically isolated structures, which relies on displacement. Thus, such a design requires an accurate definition of the maximum value of displacement corresponding to the isolation period, and a reliable evaluation of the earthquake energy content at the low frequencies that are typical of the isolated structures, for the site and ground of interest. These evaluations shall include possible near-fault effects even in the vertical direction; for the construction of high-risk plants and components and retrofit of some cultural heritage, they shall be performed for earthquakes characterized by very long return periods. The design displacement shall not be underestimated, but neither be excessively overestimated, at least when using rubber bearings in the seismic isolation (SI) system. In fact, by decreasing transverse deformation of such SI systems below a certain value, their horizontal stiffness increases. Thus, should a structure (e.g. a civil defence centre, a masterpiece, etc.) protected in the aforesaid way be designed to withstand an unnecessarily too large earthquake, the behaviour of its SI system will be inadequate (i.e. it will be too stiff) during much more frequent events, which may really strike the structure during its life. Furthermore, since SI can be used only when the room available to the structure laterally is sufficient to create a structural gap compatible with the design displacement, overestimating this displacement may lead to unnecessarily renouncing of the use of such a very efficient method, especially in the case of retrofits of existing buildings. Finally, for long structures (e.g. several bridges or viaducts and even some buildings) an accurate evaluation of the possibly different ground displacements along the structure is required (this also applies to conventionally built structures). In order to overcome the limits of PSHA, this method shall be complemented by the development and application of deterministic models. In particular, the lack of displacement records requires the use of modelling, once they are calibrated against more commonly available velocity or acceleration records. The aforesaid remarks are now particularly important in the P.R. China and Italy, to ensure safe reconstruction after the Wenchuan earthquake of May 12, 2008 and the Abruzzo earthquake of April 6, 2009: in fact, wide use of SI and other anti-seismic systems has been planned in the areas struck by both events. 相似文献
11.
12.
《地震研究进展（英文）》2022,2(4):100171
A design procedure for improving the seismic performance of unequal-span underground structures by installing isolation devices at the top end of columns is proposed based on the seismic failure mode of frame-type underground structures and the design concept of critical support columns. A two-dimensional finite element model (FEM) for a soil-underground structure with an unequal-span interaction system was established to shed light on the effects of a complex subway station with elastic sliding bearings (ESB) and lead rubber bearings (LRB) on seismic mitigation. It was found that the stiffness and internal force distribution of the underground structure changed remarkably with the installation of isolation devices at the top end of the columns. The constraints of the beam-column joints were significantly weakened, resulting in a decrease in the overall lateral stiffness and an increase in the structural lateral displacement. The introduction of the isolation device effectively reduces the internal force and seismic damage of the frame column; however, the tensile damage to the isolation structure, such as the roof, bottom plate, and sidewall, significantly increased compared to those of the non-isolation structure. Although the relative slip of the ESB remains within a controllable range under strong earthquake excitation as well as frame columns with stable vertical support and self-restoration functions, the LRB shows a better performance during seismic failure and better lateral displacement response of the unequal-span underground structure. The analysis results provide new ideas and references for promoting the application of seismic isolation technology in underground structures. 相似文献
13.
Residual displacement, as a significant measure of structural inelasticity, is effectively used in post-earthquake seismic assessment of structures. This demand can be considered for seismic evaluation of structures under multiple earthquakes. This study introduces a simple and novel index to predict the residual displacement of mainshock-damaged structures against subsequent aftershock. The proposed index is defined as a ratio between residual displacement of damaged structures against aftershock and peak inelastic displacement of intact structures under mainshock. In this study, constantstrength spectra based on the index are developed considering the effects of important structural characteristics and also significant seismic parameters. Moreover, analytical equations are presented to predict the proposed index for bi-linear single-degree-of-freedom(SDOF) systems considering both the effects of positive and negative polarities of aftershock. Furthermore, an equation is suggested to estimate the peak inelastic displacement of intact systems under mainshock, which is required to compute the index. 相似文献
14.
目前的既有钢混结构地震损伤研究没有同时考虑不同抗震设计规范差异和耐久性两个因素对结构抗震性能的影响,且损伤指标较简单,在动力损伤分析中也存在局限。基于云模型的特点,提出了包括弹塑性耗能差率、刚度损伤指数、层间位移角和顶点位移角的多元结构损伤状态综合评估方法,能够同时考虑结构各损伤指数的随机性和模糊性。考虑不同版本抗震设计规范造成的结构性能差异和耐久性下降对结构性能的影响,设计3个典型五层钢混框架结构,进行增量动力分析,验证损伤评估方法的准确性。结果表明：随着抗震规范版本的更新,结构的损伤程度有适当减轻;同一结构的损伤程度因混凝土碳化作用先减轻后加重;采用弹塑性耗能差率表征既有结构的地震损伤效果优于刚度损伤指数;基于多指标云模型损伤评估方法获得的云模型综合隶属度和综合损伤值能够更加细化和精确地描述结构损伤状态。 相似文献
15.
传统的竹（木）框架结构因其抗侧力性能差,导致地震灾害下损失较大。在竹（木）框架中增设对角预应力拉索,可以有效地提高其抗侧刚度。为研究重组竹框架结构中对角预应力拉索对结构抗震失效概率,采用增量动力分析（IDA）对其易损性进行分析。通过定义3个性能水平,以地震峰值加速度作为地震强度指标,结构的层间位移角作为结构响应参数,分析得到无对角预应力拉索的重组竹框架的地震易损性曲线。最后分析对角预应力拉索对重组竹框架,得到2种预应力水平下的地震易损性曲线,并与无对角预应力拉索的重组竹框架的地震易损性曲线进行了对比,研究对角预应力拉索对重组竹框架地震易损性的影响。 相似文献
16.
The equivalent linearization method approximates the maximum displacement response of nonlinear structures through the corresponding equivalent linear system.By using the particle swarm optimization technique,a new statistical approach is developed to determine the key parameters of such an equivalent linear system over a 2D space of period and damping ratio.The new optimization criterion realizes the consideration of the structural safety margin in the equivalent linearization method when applied to the performance-based seismic design/evaluation of engineering structures.As an application,equations for equivalent system parameters of both bilinear hysteretic and stiffness degrading single-degree-offreedom systems are deduced with the assumption of a constant ductility ratio.Error analyses are also performed to validate the proposed approach. 相似文献
17.
参数化的装配式钢混组合结构建筑信息模型缺少结构信息描述,无法实现装配式钢混组合结构图档的修正和自主更新,对结构构件的损伤评估效果差,抗震加固性能差。据此提出用于装配式钢混组合结构抗震加固的建筑信息模型,模型框架包括建筑设计模型、结构设计模型、结构抗震加固设计和损伤评估;通过结构构件的实体定义、属性定义和关联性定义,全面描述柱、梁、板和墙等钢混组合结构构件的抗震加固性能信息;采用模糊加固评估方法获取精准的结构构建综合损伤指数,评估结构构件的加固等级,提高抗震加固性能。经实验证明,所设计模型得到的结构损伤指数与实际损伤指数的误差低于0.03,说明该模型分析装配式钢混组合结构抗震加固性能准确性较高。 相似文献
18.
现阶段针对建筑复合节能墙体的抗震性能评估主要根据强震发生后墙体损毁程度实现,评估结果精确度低,因此构建强震环境下建筑复合节能墙体抗震性能评估模型,根据复合节能墙体构件的强度和刚度退化系数,描述强震环境下建筑复合节能墙体损伤情况;在此基础上,采用动态增量分析法(IDA)在不同强度地震动输入条件下,根据建筑复合节能墙体结构响应参数和地震动强度参数构建2种参数的关系曲线——IDA曲线,利用R-O单一函数曲线规则化IDA曲线,获取IDA概率分位曲线,并将50%概率分位曲线斜率用于描述墙体结构损伤的变化,该曲线斜率则为墙体结构损伤指数,依据该指数准确评估强震环境下建筑复合节能墙体抗震性能。实验结果表明,所构建模型可准确分析不同峰值地面加速度时建筑复合节能墙体结构的位移变化,且模型随地震等级不断提升,评估建筑复合节能墙体抗震性结果精度逐渐提高,是一种适合强震环境的建筑复合节能墙体抗震评估模型。 相似文献
19.
Low-aspect-ratio, reinforced concrete shear walls are the primary lateral-load-carrying element in many structures designed for protective purposes. A review of the technical literature shows that considerable uncertainty exists regarding the elastic stiffness these structures will exhibit during seismic excitation. Because of this uncertainty, current design practice often employs a stiffness reduction factor. In an attempt to develop accurate information regarding the stiffness of these structures, 13 shear wall elements were tested statically; dynamically, with simulated seismic base excitations on a shake table; and with experimental modal analysis procedures. Results of these tests show that the shear wall's stiffness can be accurately estimated with a mechanics-of-materials analysis that accounts for shear deformation. 相似文献