首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Ａｌｉｇｎｍｅｎｔｓｉｌｋｗｏｒｍｓａｓｓｅｉｓｍｉｃａｎｉｍａｌａｎｏｍａｌｏｕｓｂｅｈａｖｉｏｒ（ＳＡＡＢ）ａｎｄｅｌｅｃｔｒｏｍａｇｎｅｔｉｃｍｏｄｅｌｏｆａｆａｕｌｔ：ａｔｈｅｏｒｙａｎｄｌａｂｏｒａｔｏｒｙｅｘｐｅｒｉｍｅｎｔＭＯＴＯ...  相似文献   

2.
Ｃｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆａｍｂｉｅｎｔｓｔｒｅｓｓｖａｌｕｅｓｆｏｒｍｉｃｒｏ－ｅａｒｔｈｑｕａｋｅｓｅｑｕｅｎｃｅｓｉｎＷｅｓｔｅｒｎＹｕｎｎａｎ　Ｅａｒｔｈｑｕａｋｅ　Ｐｒｅｄｉｃｔｉｏｎ　Ｅｘｐｅｒｉｍｅｎｔａｌ　ＦｉｅｌｄＪｉａ－Ｚ...  相似文献   

3.
Source parameters of the earthquakes of the Baikal rift system   总被引：1，自引：0，他引：1  
The dynamic parameters of the earthquake source—the seismic moment, the moment magnitude, the source radius, the stress drop, and the amplitude of displacement—are determined by the amplitude Fourier spectra of the body shear waves (S-waves) for 62 earthquakes of the Baikal rift system with the energy class of K P = 9.1–15.7. In the calculations I used the classical Brune model. The seismic moment of the earthquakes being investigated changes from 3.65 × 1011 N m to 1.35 × 1018 N m, and the radii of earthquake sources vary from 390 m to 1.84 km. The values of the drop in stress Δσ grow with an increase in the seismic moment up to 1.7 × 108 Pa. For the group of weak earthquakes (M w = 1.7–3.3), extremely low values of the drop in stress 103–104 Pa are observed. The maximum amplitude of displacement in the source amounts to 5.95 m. The empirical equations between the seismic moment and the other dynamic parameters of the source are determined. The regional dependence of the seismic moment and energy class is obtained: log M 0 ± 0.60 = 1.03K P + 3.17. The character of the relationship between the seismic moment and the corner frequency indicates that the classical scaling law of the seismic spectrum for the earthquakes in question is not fulfilled. The obtained estimates of the dynamic parameters are in satisfactory agreement with the published data concerning the analogous parameters of the other rift zones, which reflects the general regular patterns of the destruction of the lithosphere and the seismicity in the extension zones of the lithosphere.  相似文献   

4.
The source parameters for 213 Bhuj aftershocks of moment magnitude varying from 2.16 to 5.74 have been estimated using the spectral analysis of the SH- waveform on the transverse component of the three-componnet digital seismograms as well as accelerograms. The estimated stress drop values for Bhuj aftershocks show more scatter (Mo0.5 to 1 ∞ Δσ) toward the larger seismic moment values (log Mo ≥ 1014.5 N-m, larger aftershocks), whereas, they show a more systematic nature (Mo3 ∞ Δσ) for smaller seismic moment (log Mo < 1014.5 N-m, smaller aftershocks) values. This size dependency of stress drop has also been seen from the relation between our estimated seismic moment and source radius, however, this size-dependent stress drop is not observed for the source parameter estimates for the other stable continental region earthquakes in India and around the world. The estimated seismic moment (Mo), source radius (r) and stress drop (Δσ) for aftershocks of moment magnitude 2.16 to 5.74 range from 1.95 × 1012 to 4.5 × 1017 N-m, 239 to 2835 m and 0.63 to 20.7 MPa, respectively. The near-surface attenuation factor (k) is found to be large of the order of 0.03 for the Kachchh region, suggesting thick low velocity sediments beneath the region. The estimated stress drop values show an increasing trend with the depth indicating the base of seismogenic layer (as characterized by larger stress drop values (>15 MPa)) lying in 22–26km depth range beneath the region. We suggest that the concentration of large stress drop values at 10–36km depth may be related to the large stress/strain associvated with a brittle, competent intrusive body of mafic nature.  相似文献   

5.
On the basis of about 300 earthquake wave forms observed in the Shidian M S=5.9 sequences on April 12, 2001 recorded in Kunming Digital Seismic Network, the spectra of shear wave have been used to estimate the focal parameters of these earthquake sequences. The results show that within the magnitude range of 1.5–5.3, the seismic moments are 1010–1016 N·m, the corner frequencies are 0.2–0.8 Hz, radii of the focal rupture are 200–2 500 m and the stress drops are 0.1×105–20×105Pa. Through the statistical analyses of variation of corner frequency f c and stress drop Δσ with time, it is discovered that the average corner frequency of the foreshock sequences is obviously lower than that of the aftershock sequences. Contrarily, the average stress drops Δσ of the foreshock sequences are clearly higher than that of the aftershocks. It is considered that these variation characteristics of average corner frequency and stress drops before and after the main shock have index significance to the precursory information before a strong earthquake. The higher stress drops for the foreshock sequences show that the higher shear stresses have been stored in the area of main shock. After the main shock, most of the stresses have been released, so the aftershock sequences show a rupture process of lower stresses. Foundation item: Scientific and Technological Key Project of Yunnan Province (2001NG46)  相似文献   

6.
ＳｔｕｄｙｏｆｃａｌｉｂｒａｔｉｏｎｆｕｎｃｔｉｏｎｆｏｒｓｕｒｆａｃｅｗａｖｅｍａｇｎｉｔｕｄｅｏｆＤＫ１ｓｅｉｓｍｏｇｒａｐｈｓＦＥＮＧＸＵＥ（薛峰）ＹＯＮＧＺＨＡＯ（赵永）ＣｅｎｔｅｒｆｏｒＡｎａｌｙｓｉｓａｎｄＰｒｅｄｉｃｔｉｏｎ，Ｓｔａｔ...  相似文献   

7.
The Central Apennines, Italy, are characterized by moderate seismic activity on normal faults, oriented in directions parallel to the Apenninic chain. The subject of this study is the Umbria-Marche Apennines, a segment approximately 200-km long, where three main seismic events occurred in the last three decades. The 1979 Norcia earthquake was a Mw = 5.8 event, taking place at the south end of the considered segment. The 1984 Gubbio earthquake was a Mw = 5.6 event which took place at the north end. The 1997-1998 Colfiorito sequence constituted 8 main shocks with magnitudes Mw between 5 and 6 and epicenters located between the Gubbio and the Norcia earthquake areas. A model made of an elastic half-space is considered, in which the seismic sources are represented by rectangular dislocations which have the appropriate values of source parameters, and in which the static stress field produced by each event is calculated. The analysis of the Coulomb stress change (ΔC) as a function of time shows that the coseismic stress transfer and fault interaction played an important role in the region during the past three decades: 7 earthquakes of the 9 considered took place where ΔC>0. Such an interaction has been confirmed by the analysis of the aftershocks in the Colfiorito zone post September 26, 1997: about the 61% of the aftershocks considered took place where ΔC>0. The comparison between the ΔCs due to the coseismic stress transfer and the rate ΔĊt due to the tectonic stress allows us to quantify the time advance of the earthquakes. The ΔCs pattern shows positive values in two areas that can be regarded as historical seismic gaps.  相似文献   

8.
Starting from the classical empirical magnitude-energy relationships, in this article, the derivation of the modern scales for moment magnitude M w and energy magnitude M e is outlined and critically discussed. The formulas for M w and M e calculation are presented in a way that reveals, besides the contributions of the physically defined measurement parameters seismic moment M 0 and radiated seismic energy E S, the role of the constants in the classical Gutenberg–Richter magnitude–energy relationship. Further, it is shown that M w and M e are linked via the parameter Θ = log(E S/M 0), and the formula for M e can be written as M e = M w + (Θ + 4.7)/1.5. This relationship directly links M e with M w via their common scaling to classical magnitudes and, at the same time, highlights the reason why M w and M e can significantly differ. In fact, Θ is assumed to be constant when calculating M w. However, variations over three to four orders of magnitude in stress drop Δσ (as well as related variations in rupture velocity V R and seismic wave radiation efficiency η R) are responsible for the large variability of actual Θ values of earthquakes. As a result, for the same earthquake, M e may sometimes differ by more than one magnitude unit from M w. Such a difference is highly relevant when assessing the actual damage potential associated with a given earthquake, because it expresses rather different static and dynamic source properties. While M w is most appropriate for estimating the earthquake size (i.e., the product of rupture area times average displacement) and thus the potential tsunami hazard posed by strong and great earthquakes in marine environs, M e is more suitable than M w for assessing the potential hazard of damage due to strong ground shaking, i.e., the earthquake strength. Therefore, whenever possible, these two magnitudes should be both independently determined and jointly considered. Usually, only M w is taken as a unified magnitude in many seismological applications (ShakeMap, seismic hazard studies, etc.) since procedures to calculate it are well developed and accepted to be stable with small uncertainty. For many reasons, procedures for E S and M e calculation are affected by a larger uncertainty and are currently not yet available for all global earthquakes. Thus, despite the physical importance of E S in characterizing the seismic source, the use of M e has been limited so far to the detriment of quicker and more complete rough estimates of both earthquake size and strength and their causal relationships. Further studies are needed to improve E S estimations in order to allow M e to be extensively used as an important complement to M w in common seismological practice and its applications.  相似文献   

9.
The 26th April 1986 Dharamsala earthquake (mb 5.5) occurred in the Kangra region of Himachal Himalaya, which lies in the rupture zone of great Kangra earthquake of 1905. This was the first moderate sized earthquake to be recorded at a few sites of the strong ground motion array in the NW Himalaya. The accelerograms of this earthquake have been used to estimate its source parameters, site amplification functions and to estimate the effective shear wave attenuation factor Qβ in the frontal region of Himachal Himalaya. A double couple fault plane solution for the earthquake has been obtained based on the spectra of the transverse component of the accelerograms. The estimated values of the source parameters are seismic moment: 2.1×1024 dyne-cm, static stress drop (Δσ): 36 bars, source radius (r): 2.8 km and moment magnitude (Mw): 5.4. The estimated average values of effective shear wave attenuation factor Qβ for various sites are in the range of 125 to 300 with an overall spatial average of 239. The influence of local site effects on the observed PGA values have been examined on the basis of site amplification functions.  相似文献   

10.
Introduction In recent years the study of the digital seismology has made great progress due to the wide use of the broadband digital records. And many fine results of the focal theory have obtained. The focal theory mainly studies the physical process of the seismic fracture and production of the seismic wave, as well as its traveling process. One of the great progresses is to simulate the fracture process in the active fault. Especially a new concept of the fracture mechanics has been intro…  相似文献   

11.
We analyze the strong motion accelerograms of the moderate (M w = 6.1), March 31, 2006, Darb-e-Astane earthquake of western Iran and also those of one of its prominently recorded, large (M w = 5.1) foreshock and (M w = 4.9) aftershock. (1) Using derived SH-wave spectral data, we first objectively estimate the parameters W o\mathit{\Omega} _{\rm o} (long period spectral level), f c (corner frequency) and Q(f) (frequency dependent, average shear wave quality factor), appropriate for the best-fit Brune ω  − 2 spectrum of each of these three events. We then perform a non-linear least square analysis of the SH-wave spectral data to provide approximate near-field estimates of the strike, dip, and rake of the causative faults and also the seismic moment, moment magnitude, source size, and average stress drop of these three events. (2) In the next step, we use these approximate values and an empirical Green’s function approach, in an iterative manner, to optimally model the strong ground motion and rupture characteristics of the main event in terms of peak ground acceleration/velocity/displacement and duration of ground shaking and thereby provide improved, more reliable estimates of the causative fault parameters of the main event and its asperities. Our near-field estimates for both the main moderate event and the two smaller events are in good conformity with the corresponding far-field estimates reported by other studies.  相似文献   

12.
Follow Chen and Duda's model of spectral fall-off of (3, the dependence of peak parameters of ground motion, peak displacement dm, peak velocity vm and peak acceleration am, upon the environment stress (0-values are studied using near source seismic digital recordings for the sequence of the Wuding, Yunnan, M = 6.5 earthquake, in which, as a new thought, the peak parameters are assumed to be related to the medium Q-value. Three formulae for estimating the environment stress (0-values by the peak parameters of three types of ground motions are derived. Using these formulae, the environment stress (0-values are calculated for the sequence of the Wuding earthquake. The result show that (0-values calculated by the three formulae are constant largely, the averages of (0 are in the range of 5.0～35 MPa for most earthquakes. It belongs to the high-stress earthquakes sequence: the high-stress values are restricted to the relatively small area closely near to the epicenter of the main shock. The fine distribution structure for the contours of the environment stress (0-values is related closely to the strong aftershocks. The analysis of spatial and temporal feature of (0-values suggests that the earthquakes sequence in a rupture process generated at the specific intersection zone of seismo-tectonics under high-stress background.  相似文献   

13.
The dependence of peak ground acceleration and velocity on seismic moment is studied for a set of small earthquakes (0.7<M L<3.2) recorded digitally at distances of a few km in the Campi Flegrei volcanic area near Naples, Italy, during the ground uplift episode of 1982–1984. Numerical simulations, using the -square spectral model with constant stress drop and ane –kf high frequency decay, fit well both the velocity and acceleration data for an averagek=0.015. The observed ground motions in the 1–24 Hz frequency band appear to consist of radiation from simple sources modified only slightly by attenuation effects. Moreover, the scaling of peak values agrees closely with those determined in nonvolcanic areas, once the difference in stress drop is taken into account.  相似文献   

14.
We have employed 10 digital records and computed the spectral magnitude and the seismic radiated energy for 18 large earthquakes (M s≥6) occurred in Eur-asian belt during 1986–1989. The nine digital stations (CD-SN) distribute all over China and one in Germany. The spectral magnitudes of various period have different stability among stations. The stability is better for maximum spectral magnitudemi and seismic radiated energyE, their differences among stations are smaller, especially for the stations where the ray path main penetrates the low mantle. But the stability of corner period is usually not good. The relation between seismic radiated energy and seismic moment magnitudeM w is lg (E)=1.5Mw+c, wherec is a constant. The maximum spectral magnitudemi=M w+0.1, it is consistant with theoretical prediction. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,15, 418–426, 1993. This work supported by the Deutsche Forschungsgemeinschaft, Bonn, F. R. Germany. The support is grateful acknowledge.  相似文献   

15.
Broadband P and S waves source spectra of 12 MS5.0 earthquakes of the 1997 Jiashi, Xinjiang, China, earthquake swarm recorded at 13 GDSN stations have been analyzed. Rupture size and static stress drop of these earthquakes have been estimated through measuring the corner frequency of the source spectra. Direction of rupture propagation of the earthquake faulting has also been inferred from the azimuthal variation of the corner frequency. The main results are as follows: ①The rupture size of MS6.0 strong earthquakes is in the range of 10～20 km, while that of MS=5.0～5.5 earthquakes is 6～10 km.② The static stress drop of the swarm earthquakes is rather low, being of the order of 0.1 MPa. This implies that the deformation release rate in the source region may be low. ③ Stress drop of the earthquakes appears to be proportional to their seismic moment, and also to be dependent on their focal mechanism. The stress drop of normal faulting earthquakes is usually lower than that of strike-slip type earthquakes. ④ For each MS6.0 earthquake there exists an apparent azimuthal variation of the corner frequencies. Azimuthally variation pattern of corner frequencies of different earthquakes shows that the source rupture pattern of the Jiashi earthquake swarm is complex and no uniform rupture expanding direction exists.  相似文献   

16.
We collect 1974 broad-band velocity records of 94 earthquakes (ML=2.8~4.9, △=13~462 km) from seven stations of the Fujian Seismic Network from March 1999 to March 2007. Using real-time simulation, we obtain the corresponding acceleration and then adopt different models to analyze the seismic data. As a result, a new attenuation relationship between PGA and PGV of the small and moderate earthquakes on bedrock site in Fujian region is established. The Yongchun earthquake occurred recently verifies the attenuation relationship well. This paper provides a new approach for studying the ground motion attenuation relationship using velocity records.  相似文献   

17.
We analyzed the broadband body waves of the 1992 Nicaragua earthquake to determine the nature of rupture. The rupture propagation was represented by the distribution of point sources with moment-rate functions at 9 grid points with uniform spacing of 20 km along the fault strike. The moment-rate functions were then parameterized, and the parameters were determined with the least squares method with some constraints. The centroid times of the individual moment-rate functions indicate slow and smooth rupture propagation at a velocity of 1.5 km/s toward NW and 1.0 km/s toward SE. Including a small initial break which precedes the main rupture by about 10 s, we obtained a total source duration of 110 s. The total seismic moment isM o =3.4×1020 Nm, which is consistent with the value determined from long-period surface waves,M o =3.7×1020 Nm. The average rise time of dislocation is determined to be 10 s. The major moment release occurred along a fault length of 160 km. With the assumption of a fault widthW=50 km, we obtained the dislocationD=1.3 m. From andD the dislocation velocity isD=D/0.1 m/s, significantly smaller than the typical value for ordinary earthquakes. The stress drop =1.1 MPa is also less than the typical value for subduction zone earthquakes by a factor of 2–3. On the other hand, the apparent stress defined by 2E s /M o , where andE s are respectively the rigidity and the seismic wave energy, is 0.037 MPa, more than an order of magnitude smaller than . The Nicaragua tsunami earthquake is characterized by the following three properties: 1) slow rupture propagation; 2) smooth rupture; 3) slow dislocation motion.  相似文献   

18.
The study of seismic anomalies, related both to the temporal trend of aftershock sequences and to the temporal series of mainshocks, is important for an understanding of the physical processes relating to the existence and the characteristics of seismic precursors. The purpose of this work is to highlight some methodological aspects related to the observation of possible anomalies in the temporal decay of an aftershock sequence. It is realized by means of several parameters. We focused our work on an analysis of the Papua New Guinea seismic sequence that occurred on November 16, 2000. The magnitude of the mainshock is M = 8.2. The observed temporal series of shocks per day can be considered as a sum of a deterministic contribution and a stochastic contribution. If the decay can be modeled as a nonstationary Poisson process where the intensity function is equal to n(t) = K(t + c)−p + K 1, the number of aftershocks in a small time interval Δt is the mean value n(t)Δt, with a standard deviation σ = √n(t)Δt. We observe that there are some variations in seismicity that can be considered as seismic anomalies before the occurrence of a large aftershock. The data, checked according to completeness criteria, come from the website of the USGS NEIC data bank (). The text was submitted by the authors in English.  相似文献   

19.
We determine the rupture velocity, rupture area, stress drop and duration of four strong deep-focus earthquakes in the Philippines by back-projecting the teleseismic P waves. Four deep-focus earthquakes occurred in a totally consumed Molucca microplate; their focal depths were greater than 550 km and their moment magnitudes were between M w 6.6 and M w 7.6. By studying this deep-focus cluster, we are able to estimate the rupture velocity, rupture area and stress drop which would assist in constraining the physical mechanism for earthquakes deeper than 500 km. Since the Molucca microplate is totally consumed, little evidence is left on the surface for us to do research. This deep-focus cluster provides us the opportunity to reveal the properties of this totally consumed microplate by using seismic method for the first time. Four earthquakes in this deep-focus cluster all have multiple rupture subevents. The M w 7.3 event ruptures in two subevents, the M w 7.6 and M w 7.4 events both have three subevents. The M w 6.6 event has single peak on the amplitude as a function of time; however, its energy releases at two spatially separated areas. Our results show that this deep-focus cluster has a slow rupture velocity which is about 0.27 to 0.43 of the shear wave velocity, long-scaled duration, concentrated energy release area, and high stress drop. These source properties are similar to those of other deep earthquakes occurring in warm slabs and indicate that the totally consumed Molucca microplate possibly is a warm plate.  相似文献   

20.
In order to empirically obtain the scaling relationships for the high-frequency ground motion in the Western Alps (NW Italy), regressions are carried out on more than 7500 seismograms from 957 regional earthquakes. The waveforms were selected from the database of 6 three-component stations of the RSNI (Regional Seismic network of Northwestern Italy). The events, M W ranging between 1.2 and 4.8, were recorded within a hypocentral distance of 200 km during the time period: 1996–2001. The peak ground velocities are measured in selected narrow-frequency bands, between 0.5 and 14 Hz. Results are presented in terms of a regional attenuation function for the vertical ground motion, a set of vertical excitation terms at the reference station STV2 (hard-rock), and a set of site terms (vertical and horizontal), all relative to the vertical component of station STV2.The regional propagation of the ground motion is modeled after quantifying the expected duration of the seismic motion as a function of frequency and hypocentral distance. A simple functional form is used to take into account both the geometrical and the anelastic attenuation: a multi-variable grid search yielded a quality factor Q(f) = 310f 0.20, together with a quadri-linear geometrical spreading at low frequency. A simpler, bi-linear geometrical spreading seems to be more appropriate at higher frequencies (f > 1.0 Hz). Excitation terms are matched by using a Brune spectral model with variable, magnitude-dependent stress drop: at M w 4.8, we used Δσ = 50 MPa. A regional distance-independent attenuation parameter is obtained (κ0 = 0.012 s) by modelling the average spectral decay at high frequency of small earthquakes.In order to predict the absolute levels of ground shaking in the region, the excitation/attenuation model is used through the Random Vibration Theory (RVT) with a stochastic point-source model. The expected peak-ground accelerations (PGA) are compared with the ones derived by Ambraseys et al. (1996) for the Mediterranean region and by Sabetta and Pugliese (1996) for the Italian territory.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号