共查询到20条相似文献，搜索用时 437 毫秒
1.
Ravi V. Kolhatkar Hong Luo Erin C. Berns Christopher Gaule Joe Watterson 《Ground Water Monitoring & Remediation》2021,41(2):48-60
Vapor intrusion (VI) occurs when volatile contaminants in the subsurface migrate through the vadose zone into overlying buildings. The 2015 U.S. EPA petroleum VI guidance recommends that additional investigation of the VI risk from gasoline hydrocarbons at the underground storage tank (UST) sites is not necessary where the vertical distance between a building and a vapor source exceeds a recommended vertical screening distance. However, due to the lack of soil-gas data on the attenuation of ethylene dibromide (EDB), additional VI investigations to evaluate VI risk from EDB are recommended at UST sites with leaded gasoline releases containing EDB. We analyzed soil-gas and groundwater concentrations of EDB from eight petroleum UST sites using a new analytical method with soil-gas detection limit <0.16 μg/m3 EDB (VI screening level at the 10−6 risk level). The analysis included (1) assessing the frequency of EDB detections ≤0.16 μg/m3 at various vertical separation distances and (2) predicting vertical screening distances for EDB using the U.S. EPA PVIScreen model for different soil types in the vadose zone above dissolved-phase and LNAPL sources. Ranges of estimated aerobic biodegradation rate constants for EDB, air exchange rates for residential buildings, and source vapor concentrations for other constituents were combined with conservative estimates of EDB source concentrations as model inputs. Concentrations of EDB in soil-gas indicated that the U.S. EPA recommended vertical screening distances are protective of VI risk from EDB. Conversely, vertical screening distances predicted by modeling were >6 ft (1.8 m) for sites with sand and loam soil above dissolved phase sources and >15 ft (4.6 m) for sites with sand soil above LNAPL sources. This predicted dependence on the vapor source type and soil type in the vadose zone highlights the importance of soil characterization for VI screening at sites with EDB sources. 相似文献
2.
Ravi V. Kolhatkar Matthew A. Lahvis Ian Hers John T. Wilson Emma Luo Parisa Jourabchi 《Ground Water Monitoring & Remediation》2019,39(4):41-51
Vapor intrusion (VI) involves migration of volatile contaminants from subsurface through unsaturated soil into overlying buildings. In 2015, the US EPA recommended an approach for screening VI risks associated with gasoline releases from underground storage tank (UST) sites. Additional assessment of the VI risk from petroleum hydrocarbons was deemed unnecessary for buildings separated from vapor sources by more than recommended vertical screening distances. However, these vertical screening distances did not apply to potential VI risks associated with releases of former leaded gasoline containing 1,2-dichloroethane (1,2-DCA), because of a lack of empirical data on the attenuation of 1,2-DCA in soil gas. This study empirically evaluated 144 paired measurements of 1,2-DCA concentrations in soil gas and groundwater collected at 47 petroleum UST sites combined with BioVapor modeling. This included (1) assessing the frequency of 1,2-DCA detections in soil gas below 10−6 risk-based screening levels at different vertical separation distances and (2) comparing the US EPA recommended vertical screening distances with those predicted by BioVapor modeling. Vertical screening distances were predicted for different soil types using aerobic biodegradation rate constants estimated from the measured soil-gas data combined with conservative estimates of source concentrations. The modeling indicates that the vertical screening distance of 6 feet (1.8 m) recommended for dissolved-phase sources is applicable for 1,2-DCA below certain threshold concentrations in groundwater, while 15 feet (4.6 m) recommended for light nonaqueous phase liquid (LNAPL) sources is applicable for sites with clay and loam soils in the vadose zone, but not sand, if 1,2-DCA concentrations in groundwater exceed 150 μg/L. This dependence of the predicted vertical screening distances on soil type places added emphasis on proper soil characterization for VI screening at sites with 1,2-DCA sources. The soil-gas data suggests that a vertical screening distance of 15 feet (4.6 m) is necessary for both dissolved-phase and LNAPL sources. 相似文献
3.
William R. Wise Chi-Chung Chang Rick A. Klopp Philip B. Bedient 《Ground Water Monitoring & Remediation》1991,11(2):93-100
At an aviation gasoline spill site in Traverse City, Michigan, historical records indicate a positive correlation between significant rainfall events and increased concentrations of slightly soluble organic compounds in the monitoring wells of the site. To investigate the recharge effect on ground water quality due to infiltrating, water percolating past residual oil and into the saturated zone, an in situ infiltration experiment was performed at the site. Sampling cones were set at various depths below a circular test area, 13 feet (4 meters) in diameter. Rainfall was simulated by sprinkling the test area at a rate sufficiently low to prevent runoff. The sampling cones for soil-gas and ground water quality were installed in the unsaturated and saturated zones to observe the effects of the recharge process. At the time of the test, the water table was below the residual oil layer. The responses of the soil-gas and ground water quality were monitored during the recharge and drainage periods, which resulted from the sprinkling.
Infiltrated water was determined to have transported organic constituents of the residual oil, specifically benzene, toluene, ethylbenzene, and ortho-xylene (BTEX), into the ground water beneath the water table, elevating the aqueous concentrations of these constituents in the saturated zone. Soil-gas concentrations of the organic compounds in the unsaturated zone increased with depth and time after the commencement of infiltration. Reaeration of the unconfined aquifer via the infiltrated water was observed. It is concluded that water quality measurements are directly coupled to recharge events for the sandy type of aquifer with an overlying oil phase, which was studied in this work. Ground water sampling strategies and data analysis need to reflect the effect of recharge from precipitation on shallow, unconfined aquifers where an oil phase may be present. 相似文献
Infiltrated water was determined to have transported organic constituents of the residual oil, specifically benzene, toluene, ethylbenzene, and ortho-xylene (BTEX), into the ground water beneath the water table, elevating the aqueous concentrations of these constituents in the saturated zone. Soil-gas concentrations of the organic compounds in the unsaturated zone increased with depth and time after the commencement of infiltration. Reaeration of the unconfined aquifer via the infiltrated water was observed. It is concluded that water quality measurements are directly coupled to recharge events for the sandy type of aquifer with an overlying oil phase, which was studied in this work. Ground water sampling strategies and data analysis need to reflect the effect of recharge from precipitation on shallow, unconfined aquifers where an oil phase may be present. 相似文献
4.
Susan Schima Douglas J. LaBrecque Paul D. Lundegard 《Ground Water Monitoring & Remediation》1996,16(2):131-138
Air sparging is a relatively new technique for the remediation of ground water contaminated with petroleum hydrocarbons. In this technique, air is injected below the water table, beneath the contaminated soil. Remediation occurs by a combination of contaminant partitioning into the vapor phase and enhanced biodegradation. The air is usually removed by vacuum extraction in the vadose zone.
The efficiency of remediation from air sparging is a function of the air flow pattern, although the distribution of the injected air is still poorly understood. Cross-borehole resistivity surveys were performed at a former service station in Florence, Oregon, to address this unknown. The resistivity measurements were made using six wells, one of which was the sparge well. Data were collected over a two-week period during and after several air injections, or sparge events. Resistivity images were calculated between wells using an algorithm that assumes axially symmetric structures. The movement of the injected air through time was defined by regions of large increases in resistivity, greater than 100 percent from the background. During early sparge times, air moved outward and upward from the injection point as it ascended to the unsaturated zone. At later sparge times, the air flow reached a somewhat stable cone-shaped pattern radiating out and up from the injection point. Two days after sparging was discontinued, a residue of entrained air remained in the saturated zone, as indicated by a zone of 60 to 80 percent water saturation. 相似文献
The efficiency of remediation from air sparging is a function of the air flow pattern, although the distribution of the injected air is still poorly understood. Cross-borehole resistivity surveys were performed at a former service station in Florence, Oregon, to address this unknown. The resistivity measurements were made using six wells, one of which was the sparge well. Data were collected over a two-week period during and after several air injections, or sparge events. Resistivity images were calculated between wells using an algorithm that assumes axially symmetric structures. The movement of the injected air through time was defined by regions of large increases in resistivity, greater than 100 percent from the background. During early sparge times, air moved outward and upward from the injection point as it ascended to the unsaturated zone. At later sparge times, the air flow reached a somewhat stable cone-shaped pattern radiating out and up from the injection point. Two days after sparging was discontinued, a residue of entrained air remained in the saturated zone, as indicated by a zone of 60 to 80 percent water saturation. 相似文献
5.
Volatilization and diffusion through the unsaturated zone can be an important pathway for natural attenuation remediation of methyl tert-butyl ether (MTBE) at gasoline spill sites. The significance of this pathway depends primarily on the distribution of immiscible product within the unsaturated zone and the relative magnitude of aqueous-phase advection (ground water recharge) to gaseous-phase diffusion. At a gasoline spill site in Laurel Bay, South Carolina, rates of MTBE volatilization from ground water downgradient from the source are estimated by analyzing the distribution of MTBE in the unsaturated zone above a solute plume. Volatilization rates of MTBE from ground water determined by transport modeling ranged from 0.0020 to 0.0042 g m(-2)/year, depending on the assumed rate of ground water recharge. Although diffusive conditions at the Laurel Bay site are favorable for volatilization, mass loss of MTBE is insignificant over the length (230 m) of the solute plume. Based on this analysis, significant volatilization of MTBE from ground water downgradient from source areas at other sites is not likely. In contrast, model results indicate that volatilization coupled with diffusion to the atmosphere could be a significant mass loss pathway for MTBE in source areas where residual product resides above the capillary zone. Although not documented, mass loss of MTBE at the Laurel Bay site due to volatilization and diffusion to the atmosphere are predicted to be two to three times greater than mass loading of MTBE to ground water due to dissolution and recharge. This result would imply that volatilization in the source zone may be the critical natural attenuation pathway for MTBE at gasoline spill sites, especially when considering capillary zone limitations on volatilization of MTBE from ground water and the relative recalcitrance of MTBE to biodegradation. 相似文献
6.
Contaminants may persist for long time periods within low permeability portions of the vadose zone where they cannot be effectively treated and are a potential continuing source of contamination to ground water. Setting appropriate vadose zone remediation goals typically requires evaluating these persistent sources in terms of their impact on meeting ground water remediation goals. Estimating the impact on ground water can be challenging at sites with low aqueous recharge rates where vapor-phase movement is the dominant transport process in the vadose zone. Existing one-dimensional approaches for simulating transport of volatile contaminants in the vadose zone are considered and compared to a new flux-continuity-based assessment of vapor-phase contaminant movement from the vadose zone to the ground water. The flux-continuity-based assessment demonstrates that the ability of the ground water to move contaminant away from the water table controls the vapor-phase mass flux from the vadose zone across the water table. Limitations of these approaches are then discussed with respect to the required assumptions and the need to incorporate three-dimensional processes when evaluating vapor-phase transport from the vadose zone to the ground water. The carbon tetrachloride plume at the U.S. Department of Energy Hanford Site is used as the example site where persistent vadose zone contamination needs to be considered in the context of ground water remediation. 相似文献
7.
《Ground Water Monitoring & Remediation》1988,8(2):89-95
More than 1000 feet of fine-textured, unsaturated zone core beneath nitrogen-fertilized and irrigated farmland was collected, leached and analyzed for nitrate-nitrogen. Fertility plots treated with 200, 300, and 400 Ibs N/acre/yr accumulated significant quantities of nitrate-nitrogen in the vadose zone below the crop rooting zone. The average nitrate-nitrogen concentration approximately doubled with each 100 lbs N/acre/yr increment above the 100 lbs N/ acre/ yr treatment. Nitrate loading estimates for the plots treated with 400 lbs N/ acre/ yr indicate that over 1200 lbs N/ acre was in the vadose zone beneath the crop rooting zone. In 15 years, the nitrate moved vertically at least 60 feet through these fine-textured, unsaturated sediments. As much as 600 lbs N/acre have accumulated in the vadose zone under independent corn producers'fields.
Vadose zone sampling is effective in predicting future non-point nitrate-contaminated areas. 相似文献
Vadose zone sampling is effective in predicting future non-point nitrate-contaminated areas. 相似文献
8.
J. Rosenbloom P. Mock P. Lawson J. Brown H.J. Turin 《Ground Water Monitoring & Remediation》1993,13(3):159-169
Cleanup standards for volatile organic compounds in thick vadose zones can be based on indirect risk (transport to ground water) when contamination is below depths of significant direct risk. At one Arizona Superfund site, a one-dimensional vadose zone transport model (VLE-ACH) was used to estimate the continued transport of VOCs from the vadose zone to ground water. VLEACH is a relatively simple and readily available model that proved useful for estimating indirect risk from VOCs in the vadose zone at this site. The estimates of total soil concentrations used as initial conditions for VLF.ACH incorporated a variety of data from the site. Soil gas concentrations were found to be more useful than soil matrix data for estimating total soil concentrations at this arid-zone site. A simple mixing cell model was used with the VLEACH-derived mass loading estimates from the vadose zone over time to estimate the resulting changes in ground water concentrations. For this site, the results of the linked VLEACH/mixing cell simulations indicate it is likely that the federal MCI. for TCE will be exceeded in underlying ground water if remedial action on I he vadose zone is not pursued. 相似文献
9.
Mark L. Kram Stephen H. Lieberman Jerry Fee Arturo A. Keller 《Ground Water Monitoring & Remediation》2001,21(1):67-76
The site characterization and analysis cone penetrometer system (SCAPS), equipped with realtime fluorophore detection capabilities, was used to delineate subsurface contaminant releases in an area where plating shop waste was temporarily stored. Records indicated that various nonaqueous phase liquids (NAPLs) were released at the site. The investigators advanced the SCAPS laser-induced fluorescence (LIF) sensor to depths beneath the water table of the principal water-bearing zone. The water table was located approximately 6 feet (1.8 m) below ground surface (bgs) across the site. Fluorescence, attributed to fuel compounds commingled with chlorinated solvents, was observed at depths ranging from 4.0 to 11.5 feet (1.2 to 3.5 m) bgs. Fluorescence, attributed to naturally occurring organic materials (by process of elimination and spectral characteristics) commingled with chlorinated solvent constituents, was observed at depths ranging from approximately 13 to 40 feet (4.0 to 12.2 m) bgs. Fluorescence responses from compounds confirmed to be commingled with chlorinated solvents indicates that the SCAPS fluorophore detection system is capable of indirectly delineating vadose zone and subaqueous chlorinated solvents and other dense nonaqueous phase liquids (DNAPLs) at contaminant release sites. This confirmation effort represents the first documented account of the successful application of LIF to identify a mixed DNAPL/LNAPL source zone. 相似文献
10.
Bayless ER 《Ground water》2001,39(2):169-180
The vadose zone was examined as an environmental compartment where significant quantities of atrazine and its degradation compounds may be stored and transformed. The vadose zone was targeted because regional studies in the White River Basin indicated a large discrepancy between the mass of atrazine applied to fields and the amount of the pesticide and its degradation compounds that are measured in ground and surface water. A study site was established in a rotationally cropped field in the till plain of central Indiana. Data were gathered during the 1994 growing season to characterize the site hydrogeology and the distribution of atrazine, desethylatrazine, deisopropylatrazine, didealkylatrazine and hydroxyatrazine in runoff, pore water, and ground water. The data indicated that atrazine and its degradation compounds were transported from land surface to a depth of 1.5 m within 60 days of application, but were undetected in the saturated zone at nearby monitoring wells. A numerical model was developed, based on the field data, to provide information about processes that could retain and degrade atrazine in the vadose zone. Simulations indicated that evapotranspiration is responsible for surface directed soil-moisture flow during much of the growing season. This process causes retention and degradation of atrazine in the vadose zone. Increased residence time in the vadose zone leads to nearly complete transformation of atrazine and its degradation products to unquantified degradation compounds. As a result of macropore flow, small quantities of atrazine and its degradation compounds may reach the saturated zone. 相似文献
11.
Stephen J. Cullen 《Ground Water Monitoring & Remediation》1995,15(3):136-143
The vadose zone is the portion of the geologic profile above a perennial aquifer. Inclusion of mandatory vadose zone monitoring techniques as an approach to aquifer protect ion was first proposed under the Resource Conservation and Recovery Act in the United States in 1978 and has since received increasing acceptance at federal and stale levels. The goals of a vadose zone characterization and monitoring effort are to establish background conditions, identify contaminant transport pathways, identify the extent and degree of existing contamination, establish the basis for monitoring network design, measure the parameters needed in a risk assessment, and provide detection of contaminant migration toward ground water resources. The benefits of vadose zone monitoring include early warning of contaminant migration, potential reduction of ground water monitoring efforts, reduction of contaminant spreading and volume, and reduced time and cost of remediation once a contaminant release occurs. Vadose zone characterization and monitoring techniques should be considered as critical hydrologic tools in the prevention of ground water resource degradation. 相似文献
12.
This paper explores the relationship between vadose zone hydrology and geochemical changes in mixed mineralogy carbonate sands from a Bahamian coastal dune of Holocene age. Cores were taken from two sites: at site A, a shallow humic Entisol is developed beneath open scrub vegetation, while at site B a deeper, more organic-rich Inceptisol has formed beneath a mature hardwood coppice. X-ray diffraction analysis reveals significant contrasts in mineralogy both within and between the two sites, with partial stabilization of high-Mg calcite and aragonite, to low-Mg calcite. Stabilization is greater at site B, and is accompanied by a significant increase in total porosity. Diagenetic changes in pore-size distribution have implications for residence times of percolating water, as determined using measurements of moisture retention characteristics using pressure plate apparatus, and hydrological models of unsaturated zone moisture flux. The diagenetically more mature sands from site B have a 50–100 per cent higher moisture retention, although unsaturated hydraulic conductivity is also higher, particularly at greater suctions. The increase in water retention is likely to enhance further rates of mineral-controlled reactions, while development of an organic-rich soil also enhances the geochemical drive for dissolution. Carbonate diagenesis thus appears to be strongly linked to vadose zone hydrology, and the interactions identified here have important consequences for the nature and long-term rates of mineral stabilization. © 1997 by John Wiley & Sons, Ltd. 相似文献
13.
Hydraulic properties of saturated and unsaturated stony soils were studied on a 3.35 m long column, 1.24 m in diameter, filled with alternating sand and boulder layers. The boulders averaged 6.2 × 15 × 20 cm in size and were laid down on their flat side. Tensiometers and a neutron probe access tube were placed in the column for measuring pressure heads and water contents, respectively. Saturated conditions were obtained by ponding the column. The resulting hydraulic conductivity K was 5.1 m/day. This value could also be calculated from the measured K for the sand alone on separate samples, using a simple equation that takes into account the void ratio of the sand alone and that of the boulder-sand mixture. Unsaturated K was determined by applying water at less than ponded infiltration rates. Resulting relations between the unsaturated K and water content or negative pressure head could also be estimated from the relation between unsaturated K and pressure head for the sand alone and the calculated saturated K of the boulder-sand mixture. The method of Millington and Quirk for calculating the relation between unsaturated K and water content also gave reasonable results. The dispersivity of the boulder-sand column was 18 times that of the sand alone. Pore velocity was accurately estimated as the Darcy velocity divided by the volumetric water content. Hydraulic properties of stony vadose zones are difficult to determine. This work shows that they can be estimated from K relations measured in the laboratory on samples of the soil between the rocks. Knowledge of hydraulic properties of vadose zones is important in predicting movement of water and pollutants to the underlying ground water. 相似文献
14.
Natural source zone depletion (NSZD) is increasingly being integrated into management strategies for petroleum release sites. Measurements of NSZD rates can be used to evaluate naturally occurring hydrocarbon (HC) mass losses, and provide a baseline for evaluating engineered recovery systems. Here, nominal saturated and unsaturated zone HC losses were quantified by groundwater sampling and ground surface CO2 effluxes approximately monthly over a 1-year period. In addition, subsurface gas profiles and temperature, precipitation, and groundwater elevation were evaluated to elucidate dominant environmental factors controlling NSZD rates. Results showed that NSZD rates estimated by surface CO2 effluxes were, on average, more than a factor of 3 greater than those estimated by uptake of electron acceptors (primarily sulfate) in extracted groundwater. This may indicate that vadose zone mass loss mechanisms (e.g., volatilization and subsequent biodegradation) were dominant in this system, but possible transfer of gases from the saturated zone to the vadose zone confounds this interpretation. Results for this semiarid site revealed that increasing NSZD rates tended to occur with increasing ambient monthly precipitation and temperature when accounting for time lags associated with subsurface transport. However, groundwater elevation was not found to be significantly related to NSZD rates. This result is counter to an expectation that increased smear zone exposure increases HC mass losses, and suggests that the pump-and-treat system did not greatly influence total NSZD rates directly through smear zone flushing or indirectly by lowering the regional water table. 相似文献
15.
Stephen J. Cullen John H. Kramer Jon R. Luellen 《Ground Water Monitoring & Remediation》1995,15(3):124-135
A systematic approach is presented for the design of a multiphase vadose zone monitoring system recognizing that, as in ground water monitoring system design, complete subsurface coverage is not practical. The approach includes identification and prioritization of vulnerable areas: select ion of cost-effective indirect monitoring methods that will provide early warning of contaminant migration: selection of direct monitoring methods for diagnostic confirmation; identification of background monitoring locations; and identification of an appropriate temporal monitoring plan. An example of a monitoring system designed for a solid waste landfill is presented and utilized to illustrate the approach and provide details of system implementation. The example design described incorporates the use of neutron moisture probes deployed in both vertical and horizontal access tubes beneath the lcachate recovery collection system of the landfill. Early warning of gaseous phase contaminant migration is monitored utilizing whole-air active soil gas sampling points deployed in gravel- filled trenches beneath the subgrade. Diagnostic confirmation of contaminant migration is provided utilizing pore- liquid samplers. Conservative tracers can be used to distinguish between chemical species released by a landfill from those attributable to other (e.g. off-site) sources or present naturally in the subsurface. A discussion of background monitoring point location is also presented. 相似文献
16.
The Application of In Situ Air Sparging as an Innovative Soils and Ground Water Remediation Technology 总被引：3，自引：0，他引：3
Michael C. Marley David J. Hazebrouck Matthew T. Walsh 《Ground Water Monitoring & Remediation》1992,12(2):137-145
Vapor extraction (soil venting) has been demonstrated to be a successful and cost-effective remediation technology for removing VOCs from the vadose (unsaturated) zone. However, in many cases, seasonal water table fluctuations, drawdown associated with pump-and-treat remediation techniques, and spills involving dense, non-aqueous phase liquids (DNAPLS) create contaminated soil below the water table. Vapor extraction alone is not considered to be an optimal remediation technology to address this type of contamination.
An innovative approach to saturated zone remediation is the use of sparging (injection) wells to inject a hydrocarbon-free gaseous medium (typically air) into the saturated zone below the areas of contamination. The contaminants dissolved in the ground water and sorbed onto soil particles partition into the advective air phase, effectively simulating an in situ air-stripping system. The stripped contaminants are transported in the gas phase to the vadose zone, within the radius of influence of a vapor extraction and vapor treatment system.
In situ air sparging is a complex multifluid phase process, which has been applied successfully in Europe since the mid-1980s. To date, site-specific pilot tests have been used to design air-sparging systems. Research is currently underway to develop better engineering design methodologies for the process. Major design parameters to be considered include contaminant type, gas injection pressures and flow rates, site geology, bubble size, injection interval (areal and vertical) and the equipment specifications. Correct design and operation of this technology has been demonstrated to achieve ground water cleanup of VOC contamination to low part-per-billion levels. 相似文献
An innovative approach to saturated zone remediation is the use of sparging (injection) wells to inject a hydrocarbon-free gaseous medium (typically air) into the saturated zone below the areas of contamination. The contaminants dissolved in the ground water and sorbed onto soil particles partition into the advective air phase, effectively simulating an in situ air-stripping system. The stripped contaminants are transported in the gas phase to the vadose zone, within the radius of influence of a vapor extraction and vapor treatment system.
In situ air sparging is a complex multifluid phase process, which has been applied successfully in Europe since the mid-1980s. To date, site-specific pilot tests have been used to design air-sparging systems. Research is currently underway to develop better engineering design methodologies for the process. Major design parameters to be considered include contaminant type, gas injection pressures and flow rates, site geology, bubble size, injection interval (areal and vertical) and the equipment specifications. Correct design and operation of this technology has been demonstrated to achieve ground water cleanup of VOC contamination to low part-per-billion levels. 相似文献
17.
J. Cruz-Sanjulián M. Olías M. del Valle J.C. Rubio 《Ground Water Monitoring & Remediation》1992,12(3):188-194
In July 1988, hydrocarbons were detected in wells in the urban area of Albolote, near Granada, Spain, near the border of the "Vega de Granada" alluvial aquifer. According to available hydrogeological data, the contamination was attributed to leaks in the underground pipelines of a nearby (300m) industrial factory, where the loss of 40,000 to 50,000 liters of gasoline had been detected some weeks before. A complete hydrogeological investigation was then undertaken, involving, among other techniques: (a) an inventory of the existing wells in the area; (b) the preparation of piezometric maps; (c) the application of electrical geophysical methods; (d) the drilling of piezometers and new pumping wells between the urbanized area and the leak point; (e) the improvement of the pluviometric and piezometric control by the installation of a pluviograph and several limnigraphs; (f) the sampling, initially daily and finally weekly, in a 20-well observation network, also used for piezometric control; and (g) the geostatistical study of the analytical data. The contamination plume, extended in the direction of the flow lines, has a length of 500m and a width of less than 50m, and appears to have occurred mainly in a paleochannel. Hydrocarbons (1600 liters) were recovered by pumping and by using absorbent blankets, as well as by a gas and liquid suction method. Hydrocarbon concentrations have continuously decreased. However, sporadic increases, associated with rainfall, have been observed suggesting the presence of retained hydrocarbons in the unsaturated zone. The rate of decrease in hydrocarbon concentrations has currently slowed, particularly in the less affected zone. As a means of activating the cleaning up of the unsaturated zone, an artificial recharging method has been designed. 相似文献
18.
《Ground Water Monitoring & Remediation》1988,8(2):49-50
Currently, vadose zone monitoring is required under the Resource Conservation and Recovery Act (RCRA) only at land treatment facilities. Contaminant leak detection through ground water monitoring is very important, but it is considered to be after the fact. Remedial action costs can be reduced considerably by monitoring the vadose zone for compounds that exhibit high rates of movement. Volatile organic compounds (VOCs) exhibit this property and are present at many municipal landfills, recycling facilities, and treatment storage and disposal facilities (TSDFs). Through the authors'personal experience, it has been noted that gaseous phase transport of VOCs through the vadose zone is at least an order of magnitude greater than advective transport of VOCs in ground water. Therefore, VOCs in soil gas are an effective early warning leak detection parameter. Downward movement of leachate can be intercepted by porous cup lysimeters. Attenuation in the vadose zone slows the apparent movement of contaminants; however, it is only a matter of time before leachate reaches the water table. The authors believe that soil-gas and pore-water monitoring should and eventually will be required at all RCRA sites. If vadose zone monitoring becomes an additional requirement under RCRA, both the facility owner and the taxpayer will benefit. During the interim, facility owners can benefit by employing vadose zone monitoring techniques coupled with either qualitative or quantitative chemical analyses. 相似文献
19.
James E. Landmeyer Francis H. Chapelle Paul M. Bradley James F. Pankow Clinton D. Church Paul G. Tratnyek 《Ground Water Monitoring & Remediation》1998,18(4):93-102
Methyl tert -butyl ether (MTBE) and benzene have been measured since 1993 in a shallow, sandy aquifer contaminated by a mid-1980s release of gasoline containing fuel oxygenates. In wells downgradient of the release area, MTBK was detected before benzene, reflecting a chromatographic-like separation of these compounds in the direction of ground water flow. Higher concentrations of MTBE and benzene were measured in the deeper sampling ports of multilevel sampling wells located near the release area, and also up to 10 feet (3 m) below the water table surface in nested wells located farther from the release area. This distribution of higher concentrations at depth is caused by recharge events that deflect originally horizontal ground water flowlines. In the laboratory, microcosms containing aquifer material incubated with uniformly labeled 14 C-MTBE under aerobic and anaerobic. Fe(III)-reducing conditions indicated a low but measurable biodegradation potential (<3%14 C-MTBW as 14 CO2 ) after a seven-month incubation period, Tert -butyl alcohol (TBA), a proposed microbial-MTBE transformation intermediate, was detected in MTBE-contaminated wells, but TBA was also measured in unsaturated release area sediments. This suggests that TBA may have been present in the original fuel spilled and does not necessarily reflect microbial degradation of MTBE. Combined, these data suggest that milligram per liter to microgram per liter decreases in MTBE concentrations relative to benzene are caused by the natural attenuation processes of dilution and dispersion with less-contaminated ground water in the direction of flow rather than biodegradation at this point source gasoline release site. 相似文献
20.
Joel M. Hubbell Thomas R. Wood Brian Higgs Allan H. Wylie Deborah L. McElroy 《Ground Water Monitoring & Remediation》1998,18(3):151-157
Waste disposal sites with volatile organic compounds (VOCs) frequently contain contaminants that are present in both the ground water and vadose zone. Vertical sampling is useful where transport of VOCs in the vadose zone may effect ground water and where steep vertical gradients in chemical concentrations are anticipated. Designs for combination ground water and gas sampling wells place the tubing inside the casing with the sample port penetrating the casing for sampling. This physically interferes with pump or sampler placement. This paper describes a well design that combines a ground water well with gas sampling ports by attaching the gas sampling tubing and ports to the exterior of the casing. Placement of the tubing on the exterior of the casing allows exact definition of gas port depth, reduces physical interference between the various monitoring equipment, and allows simultaneous remediation and monitoring in a single well. The usefulness and versatility of this design was demonstrated at the Idaho National Engineering and Environmental Laboratory (INEEL) with the installation of seven wells with 53 gas ports, in a geologic formation consisting of deep basalt with sedimentary interbeds at depths from 7.2 to 178 m below land surface. The INEEL combination well design is easy to construct, install, and operate. 相似文献