首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In this study, we analyze the recent (1990–1997) seismicity that affected the northern sector (Sannio–Benevento area) of the Southern Apennines chain. We applied the Best Estimate Method (BEM), which collapses hypocentral clouds, to the events of low energy (Md max=4.1) seismic sequences in order to constrain the location and geometry of the seismogenetic structures. The results indicate that earthquakes aligned along three main structures: two sub-parallel structures striking NW–SE (1990–1992, Benevento sequence) and one structure striking NE–SW (1997, Sannio sequence). The southernmost NW–SE structure, which dips towards NE, overlies the fault that is likely to be responsible for a larger historical earthquake (Io max=XI MCS, 1688 earthquake). The northernmost NW–SE striking structure dips towards SW. The NE–SW striking structure is sub-vertical and it is located at the northern tip of the fault segment supposed to be responsible for the 1688 earthquake. The spatio-temporal evolution of the 1990–1997 seismicity indicates a progressive migration from SE (Benevento) to NW (Sannio) associated to a deepening of hypocenters (i.e., from about 5 to 12 km). Hypocenters cluster at the interface between the major structural discontinuities (e.g., pre-existing thrust surfaces) or within higher rigidity layers (e.g., the Apulia carbonates). Available focal mechanisms from earthquakes occurred on the recognized NW–SE and NE–SW faults are consistent with dip-slip normal solutions. This evidences the occurrence of coexisting NW–SE and NE–SW extensions in Southern Apennines.  相似文献   

2.
The distribution of hypocentres in the Upper Rhine Graben area is re-examined, and discussed with respect to the present day tectonic framework. Most earthquakes occur within a N60° striking wedge, located on top of a Moho dome. This wedge is limited by the surface and at depth, by a plane which, in the south of the dome, coincides with the SE dipping Conrad discontinuity. In depth, the seismicity shows a normal distribution the maximums of which are located on a surface dipping 6° towards SE, parallel to the south-eastward dipping Conrad and Moho. This surface outcrops along the north-western edge of the uplifted crystalline Vosges and Black-Forest. The main shocks in earthquake swarms in the region often occur in the vicinity of this surface and along pre-existing N–S to NE–SW Variscan or Tertiary faults and show focal mechanisms of strike-slip. In contrast, part of the aftershocks show focal mechanisms of reverse faulting associated with SE–NW striking compression. The seismic wedge and the north-westward rising seismic surface suggest initiation of crustal ramp, which starts at the south-eastern rim of the Conrad dome and which may become a thrust plane if SE–NW compression continues. In the south-eastern edge of the graben and above the south-eastern ridge of the Moho dome, where evidences for extension have been found, we identify clustering of hypocentres along a surface that strikes N150°, parallel to the main compression and dipping towards NE. Dominant normal faulting mechanisms along this surface suggests initiation of a normal, probably listric fault. At depth, the onset of the future fault plane is located on top of the NW–SE striking ridge of the lower crust and Moho, which act as a an indenter. In addition to thrusting of the whole wedge towards NW, increasing of NW–SE compression would lead to the formation of a half graben at the place of the present Sierentz depression.  相似文献   

3.
Neotectonic observations allow a new interpretation of the recent tectonic behaviour of the outer fore arc in the Caldera area, northern Chile (27°S). Two periods of deformation are distinguished, based on large-scale Neogene to Quaternary features of the westernmost part of the Coastal Cordillera: Late Miocene to Early Pliocene deformations, characterized by a weak NE–SW to E–W extension is followed by uppermost Pliocene NW–SE to E–W compression. The Middle Pleistocene to Recent time is characterized by vertical uplift and NW–SE extension. These deformations provide clear indications of the occurrence of moderate to large earthquakes. Microseismic observations, however, indicate a lack of shallow crustal seismicity in coastal zone. We propose that both long-term brittle deformation and uplift are linked to the subduction seismic cycle.  相似文献   

4.
This paper focuses on the recent tectonic evolution of the Bay of Naples with the aim of exploring the connection between local tectonics and volcanism. We reprocessed the seismic reflection dataset acquired in the area in the late 1973. The new processing was highly successful in obtaining a decisive strong reduction of random noise, removal of coherent noise and reduction of spatial aliasing. Classical interpretative schemes and complex attributes of seismic traces were used to reconstruct fault kinematics and reflector patterns. The results show that the faults affecting the Bay of Naples exhibit prevailing NE structural strikes, with the exception of the Pozzuoli Caldera where NW patterns are also common. Many faults are subvertical and show seismic evidence of volcanic activity along them. A main alignment of conjugate NE–SW faults, named here as “Magnaghi–Sebeto line”, intersects several submarine volcanic banks and separates the bay into two sectors, characterized by important geological, geophysical and petrochemical differences. The structural configuration of the bay may reflect the occurrence of either oblique extension or a transfer zone of the NW–SE fault system, along which, in the Campanian–Lucanian Apennine chain, great vertical displacements occur.  相似文献   

5.
Summary ¶The crustal structure of the Campania continental margin is synthesized from outcrop, seismic reflection and gravimetric data. Outcrop and subsurface geological data reveal the presence of NE–SW faults, E–W faults and NW–SE faults. An older extensional event occurred along NW–SE faults and was followed by the main extensional event linked to the activity of NE–SW normal faults. The latter were active between 700 and 400ka producing half-grabens filled by more than 5km of Quaternary deposits. The stratigraphic signature of these tectonic events corresponds to a Lower Pleistocene marine unconformity-bounded unit overlain by Middle Pleistocene rocks belonging to a transgressive-regressive cycle. A crustal section of the Campania margin displays an asymmetric linked fault system characterized by a 10–12km-deep main detachment level, listric normal faults and rollover anticlines. Structural and stratigraphic data document that the inception of volcanic activity at Vesuvius occurred at 400ka, just after the main extensional event, and the volcano is located at the margin of a rollover anticline.Received June 26, 2002; revised version accepted November 9, 2002  相似文献   

6.
As a result of oblique collision, the Taiwan orogen propagates southward. The Hengchun peninsula in the southern tip of the Taiwan Central Range, preserving the youngest, the least deformed and the most complete accretionary prism sequences, allows therefore better understanding of the tectonic evolution of Taiwan orogen. On the Hengchun peninsula, four main stages of paleostress can be recognized by the analysis of brittle tectonics. After recording the first two stages of paleostress, rocks of the Hengchun peninsula (the Hengchun block) have undergone both tilting and counterclockwise rotation of about 90°. The structural boundaries of this rotated Hengchun block are: the Kenting Mélange zone in the southwest, the Fongkang Fault in the north, and a submarine backthrust in the east. The angle of this rotation is principally calculated by the paleomagnetic analysis data and a physical model experiment. Through a systematic back-tilting and back-rotating restoration, the original orientations of the four paleostress stages of Hengchun peninsula are recognized. They are, from the ancient to the recent, a NW–SE extension, a combination of NW–SE transtension and NE–SW transpression, a NE–SW compression, and finally a combination of NE–SW transtension and NW–SE transpression. This result can be explained by a phenomenon of stress axes permutation, instead of a complex polyphase tectonism. This stress axes permutation is caused by the horizontal compression increase accompanying the propagation of the accretionary prism. Combining the tectonic and paleomagnetic data with paleocurrent and stratigraphic data enables us to reconstruct the tectonic evolution of the Hengchun peninsula. This reconstruction corresponds to the deformation history of a continental margin basin, from its opening to its intense deformation in the accretionary prism.  相似文献   

7.
Shallow and deep sources generate a gravity low in the central Iberian Peninsula. Long-wavelength shallow sources are two continental sedimentary basins, the Duero and the Tajo Basins, separated by a narrow mountainous chain called the Spanish Central System. To investigate the crustal density structure, a multitaper spectral analysis of gravity data was applied. To minimise biases due to misleading shallow and deep anomaly sources of similar wavelength, first an estimation of gravity anomaly due to Cenozoic sedimentary infill was made. Power spectral analysis indicates two crustal discontinuities at mean depths of 31.1 ± 3.6 and 11.6 ± 0.2 km, respectively. Comparisons with seismic data reveal that the shallow density discontinuity is related to the upper crust lower limit and the deeper source corresponds to the Moho discontinuity. A 3D-depth model for the Moho was obtained by inverse modelling of regional gravity anomalies in the Fourier domain. The Moho depth varies between a mean depth of 31 km and 34 km. Maximum depth is located in a NW–SE trough. Gravity modelling points to lateral density variations in the upper crust. The Central System structure is described as a crustal block uplifted by NE–SW reverse faults. The formation of the system involves displacement along an intracrustal detachment in the middle crust. This detachment would split into several high-angle reverse faults verging both NW and SE. The direction of transport is northwards, the detachment probably being rooted at the Moho.  相似文献   

8.
Apatite fission track analysis was performed on 56 samples from central Spain to unravel the far field effects of the Alpine plate tectonic history of Iberia. The modelled thermal histories reveal complex cooling in the Cenozoic, indicative of intermittent denudation. Accelerated cooling events occurred across the Spanish Central System (SCS) from the Middle Eocene to Recent. These accelerated cooling events resulted in up to 2.8±0.9 km of denudation in the western Sierra de Gredos and 3.6±1.0 km in the central and eastern Gredos (assuming a paleogeothermal gradient of 28±5 °C and a surface temperature of 10 °C). The greatest amount of denudation (5.0±1.6 km) occurred in the Sierra de Guadarrama. Accompanying rock uplift was 4.7±1.0 and 5.9±1.6 km in the eastern Gredos and Guadarrama, respectively. Most denudation in the Gredos occurred from the Middle Eocene to the Early Miocene and can be related to the N–S stress field, induced by the Pyrenean compression. In the Guadarrama, the greatest denudation was Pliocene to Recent of age and seems related to the ongoing NW–SE Betic compression. The fact that the formation of the E–W trending Gredos coincides with the N–S Pyrenean compression and the creation of the present day morphology of the NE–SW trending Guadarrama with the younger NW–SE Betic compression, indicates that they record the far field effects of Alpine plate tectonics on Iberia. The trend of pre-existing lineaments was of major importance in influencing the style and magnitude of these of far field effects.  相似文献   

9.
We describe and compare the two transform zones that connect the Icelandic rift segments and the mid-Atlantic Ridge close to the Icelandic hot spot, in terms of geometry of faulting and stress fields. The E–W trending South Iceland Seismic Zone is a diffuse shear zone with a Riedel fault pattern including N0°–N20°E trending right-lateral and N60°–N70°E trending left-lateral faults. The dominant stress field in this zone is characterised by NW–SE extension, in general agreement with left-lateral transform motion. The Tjörnes Fracture Zone includes three major lineaments at different stages of development. The most developed, the Húsavík–Flatey Fault, presents a relatively simple geometry with a major fault that trends ESE–WNW. The stress pattern is however complex, with two dominant directions of extension, E–W and NE–SW on average. Both these extensions are compatible with the right-lateral transform motion and reveal different behaviours in terms of coupling. Transform motion has unambiguous fault expression along a mature zone, a situation close to that of the Tjörnes Fracture Zone. In contrast, transform motion along the immature South Iceland Seismic Zone is expressed through a more complicate structural pattern. At the early stage of the transform process, relatively simple stress patterns prevail, with a single dominant stress field, whereas, when the transform zone is mature, moderate and low coupling situations may alternate, as a function of volcanic–tectonic crises and induce changes in stress orientation.  相似文献   

10.
The St. Lawrence rift system from the Laurentian craton core to the offshore St. Lawrence River system is a seismically active zone in which fault reactivation is believed to occur along late Proterozoic to early Paleozoic normal faults related to the opening of the Iapetus ocean. The rift-related faults fringe the contact between the Grenvillian basement to the NW and Cambrian–Ordovician rocks of the St. Lawrence Lowlands to the SE and occur also within the Grenvillian basement. The St. Lawrence rift system trends NE–SW and represents a SE-dipping half-graben that links the NW–SE-trending Ottawa–Bonnechère and Saguenay River grabens, both interpreted as Iapetan failed arms. Coastal sections of the St. Lawrence River that expose fault rocks related to the St. Lawrence rift system have been studied between Québec city and the Saguenay River. Brittle faults marking the St. Lawrence rift system consist of NE- and NW-trending structures that show mutual crosscutting relationships. Fault rocks consist of fault breccias, cataclasites and pseudotachylytes. Field relationships suggest that the various types of fault rocks are associated with the same tectonic event. High-resolution marine seismic reflection data acquired in the St. Lawrence River estuary, between Rimouski, the Saguenay River and Forestville, identify submarine topographic relief attributed to the St. Lawrence rift system. Northeast-trending seismic reflection profiles show a basement geometry that agrees with onshore structural features. Northwest-trending seismic profiles suggest that normal faults fringing the St. Lawrence River are associated with a major topographic depression in the estuary, the Laurentian Channel trough, with up to 700 m of basement relief. A two-way travel-time to bedrock map, based on seismic data from the St. Lawrence estuary, and comparison with the onshore rift segment suggest that the Laurentian Channel trough varies from a half-graben to a graben structure from SW to NE. It is speculated that natural gas occurrences within both the onshore and offshore sequences of unconsolidated Quaternary deposits are possibly related to degassing processes of basement rocks, and that hydrocarbons were drained upward by the rift faults.  相似文献   

11.
Processing of gravity and magnetic maps shows that the basement of the Upper Rhine Graben area is characterized by a series of NE–SW trending discontinuities and elongated structures, identified in outcrops in the Vosges, Black Forest, and the Odenwald Mountains. They form a 40 km wide, N30–40° striking, sinistral wrench-zone that, in the Visean, shifted the Variscan and pre-Variscan structures by at least 43 km to the NE. Wrenching was associated with emplacement of several generations of plutonic bodies emplaced in the time range 340–325 Ma. The sub-vertical, NE–SW trending discontinuities in the basement acted as zones of weakness, susceptible to reactivation by subsequent tectonism. The first reactivation, marked by mineralizations and palaeomagnetic overprinting along NE–SW faults of the Vosges Mountains, results from the Liassic NW–SE extension contemporaneous with the break-up of Pangea. The major reactivation occurred during the Late Eocene N–S compression and the Early-Middle Oligocene E–W extension. The NE–SW striking basement discontinuities were successively reactivated as sinistral strike-slip faults, and as oblique normal faults. Elongated depocenters appear to form in association with reactivated Variscan wrench faults. Some of the recent earthquakes are located on NE–SW striking Variscan fault zones, and show sinistral strike-slip focal mechanisms with the same direction, suggesting also present reactivation.  相似文献   

12.
The Iberian Chain is a wide intraplate deformation zone formed by the tectonic inversion during the Pyrenean orogeny of a Permian–Mesozoic basin developed in the eastern part of the Iberian Massif. The N–S convergence between Iberia and Eurasia from the Late Cretaceous to the Lower Miocene times produced significant intraplate deformation. The NW–SE oriented Castilian Branch of the Iberian Chain can be considered as a “key zone” where the proposed models for the Cenozoic tectonic evolution of the Iberian Chain can be tested. Structural style of basin inversion suggests mainly strike–slip displacements along previous NW–SE normal faults, developed mostly during the Mesozoic. To confirm this hypothesis, structural and basin evolution analysis, macrostructural Bouguer gravity anomaly analysis, detailed mapping and paleostress inversions have been used to prove the important role of strike slip deformation. In addition, we demonstrate that two main folding trends almost perpendicular (NE–SW to E–W and NW–SE) were simultaneously active in a wide transpressive zone. The two fold trends were generated by different mechanical behaviour, including buckling and bending under constrictive strain conditions. We propose that strain partitioning occurred with oblique compression and transpression during the Cenozoic.  相似文献   

13.
Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).  相似文献   

14.
In this paper, analysis of joints developed in folded quartzites of Galudih area, Jharkhand State (India) is presented. The joint pattern indicates that NE–SW joints are the dominant set. These have developed perpendicular to the NW–SE trending axial planes and hinges of the folds in quartzites implying that they are cross-joints. Plumose structures are observed on NE–SW joint surfaces that indicate their formation by extension perpendicular to the joint face. It is inferred that this extension in NW-SE direction is related to NE–SW compressional stresses that resulted in folding of the quartzite by flexural-slip mechanism.  相似文献   

15.
Analysis of fault system in the high-P/T type Sambagawa metamorphic rocks of central Shikoku, southwest Japan, shows that conjugate normal faults pervasively developed in the highest-grade biotite zone (upper structural level) in three study areas (Asemi river, Oriu and Niihama areas). These conjugate normal faults consist of NE–SW to E–W striking and moderately north-dipping (set A), and NNW–SSE striking and moderately east dipping (set B) faults. The fault set A is dominant compared to the fault set B, and hence most of deformation is accommodated by the fault set A, leading to non-coaxial deformation. The sense of shear is inferred to be a top-to-the-WNW to NNW, based on the orientations of striation or quartz slickenfibre and dominant north-side down normal displacement. These transport direction by normal faulting is significantly different from that at D1 penetrative ductile flow (i.e. top-to-the-W to WNW). It has also been found that these conjugate normal faults are openly folded during the D3 phase about the axes trending NW–SE to E–W and plunging west at low-angles or horizontally, indicating that normal faulting occurred at the D2 phase. D2 normal faults, along which actinolite breccia derived from serpentinite by metasomatism sometimes occurs, perhaps formed under subgreenschist conditions (ca. 250 °C) in relation to the final exhumation of Sambagawa metamorphic rocks into the upper crustal level. The pervasive development of D2 normal faults in the upper structural level suggests that the final exhumation of Sambagawa metamorphic rocks could be caused by “distributed extension and normal faulting (removal of overburden)” in the upper crust.  相似文献   

16.
The study area is located in the south-eastern part of the Crati valley (Northern Calabria, Italy), which is a graben bordered by N–S trending normal faults and crossed by NW–SE normal left-lateral faults. Numerous severe crustal earthquakes have affected the area in historical time. Present-day seismic activity is mainly related to the N–S faults located along the eastern border of the graben. In this area, much seismically induced deep-seated deformation has also been recognised.In the present paper, radon concentrations in soil gas have been measured and compared with (a) lithology, (b) Quaternary faults, (c) historical and instrumental seismicity, and (d) deep-seated deformation.The results highlight the following:
(a) There is no evidence of a strong correlation between lithology and the radon anomalies.
(b) A clear correlation between the N–S geometry of radon anomalies and the orientation of main fault systems has been recognised, except in the southernmost part of the area, where the radon concentrations are strongly affected by the superposition of the N–S and the NW–SE fault systems.
(c) Epicentral zones of instrumental and historical earthquakes correspond to the highest values of radon concentrations, probably indicating recent activated fault segments. In particular, high radon values occur in the zones struck by earthquakes in 1835, 1854, and 1870.
(d) Deep-seated gravitational deformation generally coincides with zones characterised by low radon concentrations.
In the studied area, the anisotropic distribution of radon concentrations is congruent with the presence of neotectonic features and deep-seated gravitational phenomena. The method used in this study could profitably contribute towards either seismic risk or deep-seated gravitational deformation analyses.  相似文献   

17.
We investigate the properties of the April 2007 earthquake swarm (Mw 5.2) which occurred at the vicinity of Lake Trichonis (western Greece). First we relocated the earthquakes, using P- and S-wave arrivals to the stations of the Hellenic Unified Seismic Network (HUSN), and then we applied moment tensor inversion to regional broad-band waveforms to obtain the focal mechanisms of the strongest events of the 2007 swarm. The relocated epicentres, cluster along the eastern banks of the lake, and follow a distinct NNW–ESE trend. The previous strong sequence close to Lake Trichonis occurred in June–December 1975. We applied teleseismic body waveform inversion, to obtain the focal mechanism solution of the strongest earthquake of this sequence, i.e. the 31 December 1975 (Mw 6.0) event. Our results indicate that: a) the 31 December 1975 Mw 6.0 event was produced by a NW–SE normal fault, dipping to the NE, with considerable sinistral strike-slip component; we relocated its epicentre: i) using phase data reported to ISC and its coordinates are 38.486°N, 21.661°E; ii) using the available macroseismic data, and the coordinates of the macroseismic epicentre are 38.49°N, 21.63°E, close to the strongly affected village of Kato Makrinou; b) the earthquakes of the 2007 swarm indicate a NNW–SSE strike for the activated main structure, parallel to the eastern banks of Lake Trichonis, dipping to the NE and characterized by mainly normal faulting, occasionally combined with sinistral strike-slip component. The 2007 earthquake swarm did not rupture the well documented E–W striking Trichonis normal fault that bounds the southern flank of the lake, but on the contrary it is due to rupture of a NW–SE normal fault that strikes at a  45° angle to the Trichonis fault. The left-lateral component of faulting is mapped for the first time to the north of the Gulf of Patras which was previously regarded as the boundary for strike-slip motions in western Greece. This result signifies the importance of further investigations to unravel in detail the tectonics of this region.  相似文献   

18.
In this study, we examined the subsurface structure in the vicinity of the active Atera fault beneath at least one monogenetic volcano that forms the Sakashita body of the Ueno basalts, central Japan. Microgravity and seismic reflection surveys over an area of about 3×3 km (horizontal)×1 km (vertical from surface) revealed that (1) a low-density body interpreted as the damaged zone of the Atera fault reaches a depth more than 200 m below sea level; and (2) a weak zone of crust that may exist about 1.5 km southwest of the Atera fault in a direction parallel to it. By combining the shape of the Sakashita body and (2), we propose that a dyke extending in a NW–SE direction with several vent alignments in the same direction may exist along this weak zone. This suggests that the studied area was governed in the NW–SE compressional and NE–SW extensional stress field when the Sakashita body formed.  相似文献   

19.
In response to the discovery of diamonds within modern alluvium in the glaciated area of Wawa, Ontario, Canada, the Ontario Geological Survey undertook a regional program of surficial mapping and modern alluvial sediment sampling to assess the potential of the area for diamond-bearing kimberlite. Five varieties of kimberlite-derived indicator minerals were recovered and the composition of three varieties was evaluated, resulting in the identification of G10 Cr-pyrope garnet, inclusion field chromite and Mg-ilmenite. The distribution of indicator minerals was examined in the context of the glacial and bedrock geology. Glacial dispersal from non-kimberlitic marker units is restricted (commonly less than 200 m) and many kimberlite indicator minerals were recovered from samples collected close to cross-cutting NE–SW and NW–SE faults and a strong NE–SW trend in the bedrock associated with the Kapuskasing Structural Zone. From this, several potential exploration targets for diamond-bearing kimberlite are defined.  相似文献   

20.
Based on studies of images obtained from LANDSAT-1 and 2, several seemingly active movement zones have been delineated in a section of the eastern Alps and are being reported in the present paper for the first time. These zones, trending W—E to NW—SE, cut across all earlier Alpine boundaries and contacts and on either side along their length, are marked with drag effects, indicating their post-Alpine neotectonic nature. Their relation with the present-day central European stress field, as determined from fault-plane studies and in-situ stress measurements, has been sought. In conjunction with the evidence from neighbouring areas, a dextral shear tendency of the present-day Mediterranean is indicated. Further, a number of extensive lineaments have been observed in the Alpine section. Statistically, there are three major lineation sets trending N45°, N15°, N345°. They appear to have developed cogenetically as a result of shear and tensile failures due to a stress field with maximum principal stress oriented averagely at N15°. This direction of the maximum principal stress, deduced from the above lineation analysis of the eastern Alps, is in striking conformity with the one believed to have been in existence for the development of the Rhinegraben (N20°). It appears that the Rhinegraben and the Alpide belt have evolved cogenetically and concurrently under the same dominant stress field (P1 = N—NNE, P2 = vertical and P3 = E—ESE) and hence the two geotectonic features are really not antagonistic and mutually incompatible as usually believed on the grounds that one involves tension (taphrogenesis — Rhinegraben) and the other compression (orogenesis — Alpide belt) but are different manifestations of the same stress field. Besides, some additional light has been thrown on the possible controls of development of the Giudicaria Line and cause of predominance of NE—SW trending sinistral faults.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号