共查询到20条相似文献，搜索用时 46 毫秒
1.
Digital image processing technology can objectively reflect the surface roughness of coal and rock mass fractures and turn physical properties such as fluctuation height to physical data of the rock fracture surface to be used for numerical analyses; thus, it can effectively be applied to the seepage flow analysis of rock fractures. First, clear digital images of the fracture surface height are obtained under the same camera conditions, and then characteristic function values specific to various structure are normalized. Subsequently, the fluctuation height distribution of the rock surface is restored according to the measured fluctuation heights of local points. Finally, according to the surface fluctuation of fractures, invasive restructuring is carried out for three-dimensional fractures in the same coordinate system. Obtained physical parameters on the three-dimensional fractures of the rock are inputted into the COMSOL Multiphysics software to obtain the characteristic three-dimensional model of the rock fracture surface. The numerical analysis results are compared with experimental data on fracture seepage obtained from a seepage coupling true triaxial test system, and the relevance between the simulated result and the physical experiment is higher than 90%, which confirms that the integration of the digital image technology and the numerical analysis method can effectively simulate seepage in rough fractures. The hydraulic gradient of rough fractures and seepage velocity are also consistent with Forchheimer flow characteristics. 相似文献
2.
Quantification of Aperture and Relations Between Aperture,Normal Stress and Fluid Flow for Natural Single Rock Fractures 总被引：1，自引：0，他引：1
Pinnaduwa H. S. W. Kulatilake Jinyong Park Pirahas Balasingam Robert Morgan 《Geotechnical and Geological Engineering》2008,26(3):269-281
Accurate quantification of rock fracture aperture is important in investigating hydro-mechanical properties of rock fractures.
Liquefied wood’s metal was used successfully to determine the spatial distribution of aperture with normal stress for natural
single rock fractures. A modified 3D box counting method is developed and applied to quantify the spatial variation of rock
fracture aperture with normal stress. New functional relations are developed for the following list: (a) Aperture fractal
dimension versus effective normal stress; (b) Aperture fractal dimension versus mean aperture; (c) Fluid flow rate per unit
hydraulic gradient per unit width versus mean aperture; (d) Fluid flow rate per unit hydraulic gradient per unit width versus
aperture fractal dimension. The aperture fractal dimension was found to be a better parameter than mean aperture to correlate
to fluid flow rate of natural single rock fractures. A highly refined variogram technique is used to investigate possible
existence of aperture anisotropy. It was observed that the scale dependent fractal parameter, K
v, plays a more prominent role than the fractal dimension, D
a1d, on determining the anisotropy pattern of aperture data. A combined factor that represents both D
a1d and K
v, D
a1d × K
v, is suggested to capture the aperture anisotropy. 相似文献
3.
单孔岩样水压致裂的数值分析 总被引：2，自引：0，他引：2
水压致裂是改变岩体结构的一种天然行为和人为手段。采用F－RFPA2D软件,对水压致裂过程、裂缝扩展形态及注水孔形状和大小、应力条件和岩样强度等影响因素进行了研究。将开始出现声发射的水压称为微裂压力,将声发射急剧增多、裂缝非稳定扩展直至岩样破坏的水压称为破裂压力。岩样尺寸一定时,微裂压力和破裂压力随内孔面积增加而降低,方形孔岩样的微裂压力和破裂压力均小于同面积的圆形孔。微裂压力和破裂压力随围压或岩样强度增加而增加,且其差值随岩样强度增加而增加,理论破裂压力与模拟值趋势基本一致。方形孔的宏观裂纹起裂位置多在角点附近,而圆形孔比较随机。无围压时,宏观裂纹的延伸方向随机;有围压时,宏观裂纹扩展方向大致与主应力方向一致,且沿较大主应力方向的宏观裂纹扩展至岩样破坏,较小主应力方向宏观裂纹不完全发育。研究结果对水压致裂试验和工程实践有一定参考意义。 相似文献
4.
为了研究双轴压缩下预制裂隙岩样宏细观力学行为及裂纹扩展模式,采用颗粒流程序（PFC）先分析平行粘结模型细观参数对宏观参数的影响,接着结合完整花岗岩常规三轴压缩试验结果对其细观参数进行标定,最后借助该组参数模拟有围压下预制裂隙（上裂隙①和下裂隙②）岩样的力学特性。研究表明:基于PFC程序和标定的参数能较好地模拟完整岩样的破坏情况;随着围压增大,双裂隙岩样的峰值强度和弹性模量均增大,且裂隙②与水平向夹角α2为90°时,两者均达到最大值;不同的α2下,各岩样的裂纹演化均经过裂纹萌生、发展和稳定等3个阶段;随着围压的降低和轴向应力的增大,颗粒间的力链破坏情况愈严重。由于拉伸力链的集中和分布不同,水平裂隙长度方向上的裂纹沿着轴向扩展,且两裂隙的贯通呈现不同方式。 相似文献
5.
We present a stabilized extended finite element formulation to simulate the hydraulic fracturing process in an elasto‐plastic medium. The fracture propagation process is governed by a cohesive fracture model, where a trilinear traction‐separation law is used to describe normal contact, cohesion and strength softening on the fracture face. Fluid flow inside the fracture channel is governed by the lubrication equation, and the flow rate is related to the fluid pressure gradient by the ‘cubic’ law. Fluid leak off happens only in the normal direction and is assumed to be governed by the Carter's leak‐off model. We propose a ‘local’ U‐P (displacement‐pressure) formulation to discretize the fluid‐solid coupled system, where volume shape functions are used to interpolate the fluid pressure field on the fracture face. The ‘local’ U‐P approach is compatible with the extended finite element framework, and a separate mesh is not required to describe the fluid flow. The coupled system of equations is solved iteratively by the standard Newton‐Raphson method. We identify instability issues associated with the fluid flow inside the fracture channel, and use the polynomial pressure projection method to reduce the pressure oscillations resulting from the instability. Numerical examples demonstrate that the proposed framework is effective in modeling 3D hydraulic fracture propagation. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
6.
An experimental study of single and two-phase fluid flow through fractured granite specimens 总被引：3，自引：2，他引：1
P. G. Ranjith 《Environmental Earth Sciences》2010,59(7):1389-1395
Triaxial tests on the two-phase flow of air and water through fractured granite specimens were performed to discover whether
the two-phase fluid flow within rock fractures was laminar or turbulent. The two-phase flow characterization was carried out
based on the macroscopic two-phase steady state flow model and the homogeneous steady state flow model. Rock specimens with
a single natural fracture (joint roughness coefficient, JRC < 10) were tested using two-phase, high pressure triaxial rig.
Experimental results show that the estimated Reynolds numbers for various inlet fluid pressures are well below 1000. The findings
of this study reveal that both single and two-phase flow through rock fractures (JRC < 10) can be characterized as laminar
flows at moderate inlet fluid pressures. However, for single-phase air flow, an increase in inlet air pressures may result
in the formation of turbulent flow. 相似文献
7.
针对单一贯通结构面注浆加固影响围岩承载力的问题,提出了一种制作含单一贯通破裂面岩样的方法,并对此种岩样分别注入超细水泥和环氧树脂材料,进而借助RMT-150 C试验系统探究了固结体单/三轴压缩下强度及变形特征,最后,采用理论分析结合电镜扫描手段,揭示了结构面注浆微观固结机制。研究发现,三轴加−卸载条件下制备的破裂结构面更接近工程实际,符合试验要求;从应力−应变特征曲线来看,注超细水泥试件表现出阶段性,注环氧树脂试件曲线较为平滑;从强度特征来看,围压影响程度明显高于注浆材料的选择;注浆加固手段可提高岩体的残余强度,随着围压的提高,残余强度提高系数越不明显,固结体峰值强度愈发接近完整岩石峰值强度;从破坏特征来看,注超细水泥试件主破裂面沿原始破裂面剪切滑移,注环氧树脂试件主破裂面为新的贯通破裂面;最后,以摩尔−库仑准则为理论基础,建立了注浆材料黏结力与结构面强度提高系数关系式,发现结构面强度提高系数与浆液黏结力呈线性关系。与试验结果的对比表明,该公式较为合理,可为深部围岩支护优化提供参考。 相似文献
8.
等效水力隙宽和水力梯度对岩体裂隙网络非线性渗流特性的影响 总被引：1，自引：0，他引：1
等效水力隙宽和水力梯度是影响岩体裂隙网络渗流特性的重要因素。制作裂隙网络试验模型,建立高精度渗流试验系统;求解纳维-斯托克斯方程,模拟流体在裂隙网络内的流动状态,研究等效水力隙宽和水力梯度对非线性渗流特性的影响。结果表明,当水力梯度较小时,等效渗透系数保持恒定的常数,流体流动属于达西流动区域,流量与压力具有线性关系,可采用立方定律计算流体流动;当水力梯度较大时,等效渗透系数随着水力梯度的增加而急剧减少,流体流动进入强惯性效应流动区域,流量与压力具有强烈的非线性关系,可采用Forchheimer方程计算流体流动。随着等效水力隙宽的增加,区别线性和非线性流动区域的临界水力梯度呈幂函数关系递减。当水力梯度小于临界水力梯度时,控制方程可选立方定律;当水力梯度大于临界水力梯度时,控制方程可选Forchheimer方程,其参数A和B可根据经验公式计算得到。其研究结果可为临界水力梯度的确定及流体流动控制方程的选取提供借鉴意义。 相似文献
9.
Fushen Liu 《国际地质力学数值与分析法杂志》2020,44(12):1634-1655
The paper presents an embedded strong discontinuity approach to simulate single hydraulic fracture propagation in the poroelastic medium under plane-strain conditions. The method enriches the strain field with the discontinuous deformation mode and allows the fracture to be modeled inside elements. The Mode-I fracture initiation and propagation are described by the trilinear cohesive law, which is implemented by the penalty method. The enhanced permeability inside the fractured elements is dependent on the fracture aperture. Hydraulic fracture propagation is driven by the high pressure gradient near the fracture. Fluid transfer between the fracture and bulk rock is automatically captured within the poroelastic framework. The numerical framework is verified by the comparisons with the asymptotic analytical solutions for single hydraulic fracture propagation. 相似文献
10.
水力压裂是青海共和盆地干热岩地热资源开发的难点技术问题之一。本文基于升级改造的大尺寸真三轴水力压裂物理模拟实验系统模拟干热岩储层高温高压环境,利用青海共和盆地露头岩心进行水力压裂物理模拟实验,揭示干热岩储层水力裂缝的起裂和扩展规律。通过物理模拟实验发现：干热岩储层裂缝起裂可以通过文中提出的起裂模型判断起裂方式和预测起裂压力;水力裂缝在岩石基质中的扩展形态简单,仅沿最大主应力方向延伸;但是水力裂缝会受到岩石中弱面的影响,发生转向沿弱面延伸,形成较复杂的裂缝形态。因此,建议在干热岩储层实际施工中,在天然裂缝发育较丰富的层段开展水力压裂,以实现复杂裂缝网络提取地热能。 相似文献
11.
高温作用后花岗岩三轴压缩试验研究 总被引：2，自引：0，他引：2
为综合考察温度、围压对花岗岩力学性质及破坏方式的影响,在高温（25℃～1 000 ℃）作用后,利用MTS815.02电液伺服材料试验系统对花岗岩岩样进行不同围压作用下的三轴压缩试验。研究结果表明,（1）围压一定时,经历不同高温作用后花岗岩三轴压缩全应力-应变曲线经历了压密、弹性、屈服、破坏、塑性流动5个阶段;（2）经历不同高温作用后岩样三轴抗压强度与围压呈非线性二次多项式增长关系,围压为40 MPa时的抗压强度比单轴抗压强度提高了382.30%;常规三轴压缩条件下,400 ℃是花岗岩力学参数的阀值温度;（3）经历高温作用后,岩样弹性模量随围压升高呈增大趋势,围压为40 MPa时的弹性模量比单轴时提高了90.26%;随温度升高呈二次非线性减小,1 000 ℃时的弹性模量比25℃时降低了57.16%;（4）花岗岩的失稳型式同时取决于围压和温度。单轴压缩状态下,随着温度的升高,岩样变形破坏型式由脆性破裂向塑性变形过渡,失稳型式在低温时为突发失稳、中高温为准突发失稳,温度高于800 ℃为渐进破坏;三轴压缩状态下,随着围压的增大,岩样破裂型式由脆性张拉破裂逐渐向剪切破裂过渡,岩样的失稳型式以突发失稳为主。在试验温压范围内,影响花岗岩力学性质的首要因素是温度,其次是围压。 相似文献
12.
结构面广泛赋存于煤系中,是影响煤岩水力压裂效果的关键因素之一。调节结构面制作时间和充填材料类型,制作不同结构面类型的煤岩试件,并开展水力压裂物理实验,探究结构面类型与注入流量对水力裂缝延伸的影响及作用机制。结果表明:当注入流量为50 mL/min时,纯样试件(无结构面)的破裂压力高于含结构面试件的破裂压力,延时结构面制备间隔时间对试件破裂压力的影响很弱,调整结构面的充填材料后试件破裂压力最大降低28.79%;随着注入流量的提高,充填材料为云母,水泥试件破裂压力、声发射振铃计数峰值增大,压力上升阶段的持续时间显著缩短,水力裂缝在结构面处的延伸模式由沿结构面延伸逐渐转向沿最大主应力方向延伸。结构面类型与注入流量对水力裂缝在结构面处延伸模式的影响,主要是由于改变了水力裂缝延伸至结构面时结构面上的应力状况,可以通过理论分析预测水力裂缝与结构面的交叉延伸模式,根据结构面上应力状况,通过调节注入流量调整水力裂缝的延伸方向。 相似文献
13.
锦屏大理岩蠕变损伤演化细观力学特征的数值模拟研究 总被引：1，自引：0，他引：1
岩石的蠕变损伤和断裂是岩石流变效应的重要表现形式,但其损伤演化过程往往难以直观观测,为此,采用二维颗粒流数值模拟方法(PFC2D)对岩石的蠕变损伤和断裂的细观力学机制进行了分析。在锦屏大理岩室内试验基础上,利用颗粒流应力腐蚀模型(PSC),建立了能反映其短期和长期强度特征的柱状岩样数值模型,并开展了大量数值试验。结果表明,蠕变损伤的演化过程与暂态的损伤演化过程具有明显的差异。在岩样蠕变损伤过程中,其内部微裂纹多沿加载方向开裂且分布均匀,先快速增加再稳定扩展,最后则发生快速断裂。当荷载较小时,岩样宏观上呈现劈裂破坏特征,当荷载较大时,岩样呈现剪切破坏特征。在岩样蠕变损伤初始和稳定演化阶段的前期,荷载大小对岩样的损伤演化过程影响不大;在稳定演化阶段的后期至断裂过程中,低荷载下岩样的损伤增速比高荷载下快。 相似文献
14.
为研究盐岩变形破坏过程中损伤变量和分形维数之间的关系,对取自某地的纯盐岩开展了单轴压缩和三轴压缩试验。在基于声发射振铃计数的损伤模型和基于声发射定位点空间演化的分形维数计算的基础上,对盐岩变化破坏过程中的损伤变量和分形维数进行了研究。研究表明：在盐岩变形破坏过程中,盐岩分形维数逐渐降低,损伤变量逐渐增加,且分形维数下降的各个阶段与损伤变量增加的各个阶段相对应;盐岩变形破坏前分形维数不再明显下降,且不同应力状态下,盐岩变形破坏前分形维数不同;随着围压增大,盐岩变形破坏前分形维数逐渐降低,其中单轴压缩和三轴压缩应力状态时,分形维数分别低于2.42和2.31、2.20时,预示着试件内部损伤开始汇集,逐渐形成宏观破裂面,导致试件变形破坏;围压对盐岩声发射活动有明显的抑制作用,随着围压的增大,盐岩变形破坏过程中声发射活动逐渐减少,且在此过程中可以发现：在应力加载初期,盐岩分形维数快速下降时所对应的应力百分比逐渐增大,在应力加载后期,当盐岩分形维数不再明显减小时对应的应力百分比逐渐增大;在盐岩变形破坏的加载初期,损伤变量较小,能量释放较少;盐岩变形破坏前损伤变量增加较快,能量快速释放。 相似文献
15.
为准确地测量岩石试样在不同围压作用下的拉伸强度与变形特性,对用于岩石三轴压缩试验的MTS815材料试验机为主体设备进行了一系列技术改造,一方面设计加工了一套试验机活塞与三轴室的随动连锁装置,使原本只能提供压缩载荷的MTS815试验机也能精确提供轴向拉伸荷载;另一方面设计开发一种多自由度岩石试样三轴拉伸夹具,解决岩石等脆性材料在拉伸过程中难以始终保持对中的技术难题。提出一套完整的测试技术方法,能实现0～140 MPa围压范围内各种岩石试件的复杂三轴直接拉伸测试研究,利用研发的配套装置与测试方法对页岩试样进行了三轴拉伸试验。结果表明,试验装置和试验方法完全能够进行不同围压条件下的岩石三轴拉伸试验,得到相应的三轴拉伸试验曲线;页岩在低围压和高围压下呈现不同的破坏特征和破坏形式,低围压下依然呈现脆性特征,高围压下则是由脆性向塑性转换。 相似文献
16.
In this paper, firstly the mesoscopic elemental mechanical model for elastic damage is developed and implemented into the rock and tool interaction code (R-T2D). Then the failure processes of a heterogeneous rock specimen subjected to a wide variety of confining pressures (0–80 MPa) are numerically investigated using the R-T2D code. According to the simulated results, on the one hand, the numerical simulation reproduced some of the well-known phenomena observed by previous researchers in triaxial tests. Under uniaxial compression, rock failure is caused by a combination of axial splitting and shearing. Dilatancy and a post-failure stage with a descending load bearing capacity are the prominent characteristics of the failure. As the confining pressure increases, the extension of the failed sites is suppressed, but the individual failure sites become dense and link with each other to form a shear fracture plane. Correspondingly, the peak strength, the residual strength and the shear fracture plane angle increase, but the brittleness decreases. When the confining pressure is high enough, the specimen behaves in a plastic manner and a narrow shear fracture plane leads to its failure. The prominent characteristics are volume condensation, ductile cataclastic failure, and a constant load bearing capacity with increasing strain. On the other hand, the numerical simulation revealed some new phenomena. The highest microseismicity events occur in the post-failure stage instead of the maximal stress, and most of the microseismicity energies are released in the failure localization process. As the confining pressure increases, the microseismicity events in the non-linear deformation stage increase dramatically and the ratio between the energies dissipated at the non-linear deformation stage and those dissipated in the whole loading process increases correspondingly. Therefore, it is concluded that the developed mesoscopic elemental mechanical model for elastic damage is able to reproduce accurately the failure characteristics in loading rock specimens under triaxial conditions, and the numerical modelling can furthermore obtain some new clarifications of the rock fracture process. 相似文献
17.
The representation of the surface of a rock fracture and a numerical method to simulate fluid flow in single fractures are the keys to understanding the hydraulic behaviour of rock fractures. In this paper, a cellular automaton (CA) approach is used to generate the single fracture structure, which is assumed to be composed of contacts and voids. We develop a CA evolution rule to produce a contact area, and randomly model a single rock fracture with different contact ratios to reflect natural fracture properties such as dead voids, islands and tortuous flow path. Then, based on the localisation theory of a CA, a numerical method to simulate fluid flow in single fractures with contacts is developed. In this method, the fracture is discretised into a system composed of cell elements. Different apertures, i.e., zero for contacts and non-zero for voids, are assigned to each cell element. Therefore, the contribution of the cell elements in a contact on a cell’s transmissivity can be ignored completely. The local transmissivity is assumed to conform to the cubic law. The fluid flow in a fracture with different contact situations is then modelled using the method established in this paper. The fluid flow path, flow velocity and fluid head distributions as well as the channel flow in the fracture are well-modelled. The flow behaviour of the fracture strongly depends on the effective fluid flow path. 相似文献
18.
粗糙度是影响节理岩体强度与变形特性的重要因素之一。首先使用3D 打印机制作模具,并浇筑形成不同粗糙度（节理粗糙度系数JRC=2、7、12、17、22）的节理岩石试样。采用GCTS高温高压动静岩石三轴试验系统,对含有不同粗糙度节理岩石试样进行了三轴压缩试验,获得了不同粗糙度节理岩石试样的三轴应力–应变曲线,分析了JRC对岩石三轴强度和变形特性的影响规律,在三轴加载过程中采用声发射测试系统,分析了不同粗糙度节理岩石试样的声发射特性。运用数字三维视频显微系统观察节理面形态,讨论了不同围压下节理岩石试样峰值强度与JRC之间的关系。研究结果表明,节理面的存在直接导致节理岩石试样强度的大幅度降低,JRC对岩石破坏裂纹的形态、数量和空间分布特征亦有很大的影响,随着JRC值的增大,岩石节理面的抗剪强度增大,岩石试样的三轴抗压强度也会增大,岩石试样由脆性破坏转变为延性破坏。 相似文献
19.
为深入探究两淮矿区典型砂质泥岩劈裂注浆起裂机制,研制了常规三轴劈裂注浆试验装置,开展了类砂质泥岩浆压致裂起裂压力模型试验,基于试验结果分析了岩石强度与应力状态对注浆起裂压力、裂缝扩展形态影响规律,揭示了砂质泥岩劈裂注浆起裂机制。研究表明：起裂压力与岩石抗压强度呈正相关,且岩石抗压强度越高,劈裂路径越复杂;起裂压力对围压的敏感程度远高于轴压,且应力差 Δσ =σV −σH越大,裂缝形态越规整;孔压三轴条件下,封闭裸孔段浆压致裂法确定的岩石抗拉强度值约为单轴抗拉强度的 2.5倍。该研究结果可为今后类似岩层劈裂注浆参数设计与施工提供参考。 相似文献